JVC LT-17B60SU manual

ENGLISH DEUTSCH FRANÇAIS IT ALIANO L T -17B60SU 1004TKH-VT -VT ©2004 VICTOR COMP ANY OF JAP AN, LIMITED INSTRUCTIONS BREITBILD-LCD-TV BEDIENUNGSANLEITUNG TÉLÉVISEUR À GRAND ÉCRAN LCD MANUEL D'INSTRUCTIONS TV A PIENO SCHERMO LCD ISTRUZIONI WIDE LCD P ANEL TV 50066362[...]

ENGLISH - 1 - For your safety This equipment has been designed and manufactured to meet international safety stan- dards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. So, please read the points below for your own safety . They are of a general nature, intended to help you w[...]

ENGLISH - 2 - IF IN DOUBT PL EASE CONSUL T A COMPE- TENT ELECTRICIAN. DO DO read the operating instructions before you attempt to use the equipment. DO ensure that all electrical connections (in- cluding the mains plug, extension leads and inter-connections between pieces of equip- ment) are properly made and in accordance with the manufacturers[...]

ENGLISH - 3 - W ARNING  Fingers may be trapped under the TV causing injuries. Hold the TV at the bottom in the middle, and do not allow the stand to tilt up or down.  The TV may fall causing injuries. Hold the bottom of the stand with your hand and tilt the TV up and down.  Do not allow children to hang from the TV , place their elbows on [...]

ENGLISH - 4 - Import ant Information Please take note EXCLUSION CLAUSE JVC shall under no circumstances be liable for loss and/or damage to the product caused by:  fire;  earthquake;  accidental damage;  intentional misuse of the product;  use of the product in improper conditions;  loss and/or damage caused to the product whilst [...]

ENGLISH - 5 - Remote Control Buttons / I = (S tand By) button TV / VCR / DVD Switch Number buttons A V button ( TV , EXT -1, EXT -2, EXT -2 S, EXT-3, EXT-3 S or PC ) BLUE / PICTURE Mode button YELLOW / Sleep Timer button MENU button = Cursor Up button OK button = Cursor Right button BACK button V olume Up/Down buttons T eletext / VCR /DVD Control b[...]

ENGLISH - 6 - Control Panel Buttons ENG-(LT-17B60SU)_IB.p65 30.09.2005, 12:50 6[...]

ENGLISH - 7 - Using the stand This TV comes with a T able T op S tand already att ached. This stand can be used to adjust the direction of the TV screen. Tilt the TV up and down: While holding the stand with one hand which should be on lower level of the stand for avoiding trapping, use your other hand to hold the middle of the top of the TV and sl[...]

ENGLISH - 8 - Remove the terminal cover There are connection terminals behind the covers of the rear of the T V . Remove the cover before connecting an antenna, DVD or VCR. Remove the covers by removing the hooks. When replacing the covers, place the side or bottom of the covers against the TV and insert the hooks.  Leave the covers off if they [...]

ENGLISH - 9 - Installing TV on the wall W ARNING  When you install the TV on the wall, only use a JVC wall mounting unit (optional) which is designed for this TV .  Make sure that the TV is installed on the wall by a skilled installer . Locate the TV away from direct sunlight and strong lights, soft, indirect lighting is recommended for comfo[...]

ENGLISH - 1 0 - Preparation Install Display on solid horizontal surface such as a table or desk. For ventilation, leave a space of at least 10 cm free all around the set. T o prevent any fault and unsafe situations, please do not place any objects on top of the set. Features  It is a remote controlled colour television and PC monitor .  100 p[...]

ENGLISH - 1 1 - How to connect other devices IMPORT ANT : Switch of f the TV before connect- ing any external device. Sockets for external connections are at the back of the T V . For connection of other devices via Euroconnector refer to the manuals of the related devices. Inserting batteries in the remote control handset  Remove the battery co[...]

ENGLISH - 1 2 - Initial Settings First A.P.S. (Automatic Programming System) When you turn the TV on for the first time, the first APS menu appears. APS, searches and sorts all channels and stores them automatically on your TV , accord- ing to the transmission of programme sys- tems in your area. T o cancel APS before starting, press BLUE button. F[...]

ENGLISH - 1 3 - If  FEA TURE NOT A V AILABLE  is displayed, download was not performed correctly . Before trying to download again, check that:  The VCR power is turned on.  The VCR is T -V Link compatible.  The VCR is connected to the EXT -2.  The scart cable is fully wired. Direct REC: Y ou can easily record to VCR the images th[...]

ENGLISH - 1 4 - Programme Selection (Previous or next programme)  Press   button to select the previous programme.  Press   button to select the next programme. Programme Selection (direct access) Press digit buttons on the remote control t o select programmes between 0 and 9. TV will switch to the selected programme. T o select p[...]

ENGLISH - 1 5 - Setting Contrast  Using   or   button select Contrast .  Press   button to increase contrast level.  Press   button to decrease contrast level. Setting Bright-1  Using   or   button select Bright-1 .  Press   button to increase brightness.  Press   button to decrease [...]

ENGLISH - 1 6 - Note 1: At low signal level, the changings on the Noise Reduction function are not effective when there is menu on the screen. If the menu is removed, the effect of this function is seen. At normal broadcasting, Noise Reduction changings are effec- tive at once. Note 2: At moving pictures, while Noise Reduction is at maximum level, [...]

ENGLISH - 1 7 - Y ou can also change sound mode directly by pressing  I-II  button on your remote control. In case of bilingual broadcast (Dual Sound), you can select original or dubbed language using mode option. So when somebody lis- tens to the original language from the loud- speakers, somebody else can listen to the dubbed language from [...]

ENGLISH - 1 8 - Selecting Programme  Using   or   button select Programme.  T o select programme number , you can use   /   button or Digit Buttons. Selecting Band Band, can be chosen either ,  C or S by   or   button. Selecting Channel Channel can be changed by   or   button or b[...]

ENGLISH - 1 9 - Program Menu is used to delete a channel, to change the programme number of a channel, to give a channel name to a channel, and to start the A.P .S (Autostore) function. T o choose a channel in the PROGRAM menu Press / / / buttons. Caution: Using Delete or Insert function rewrite the current chan- nel list in the Program[...]

ENGLISH - 2 0 - on the required item. The selected mode comes automatically on the screen. Other Features TV Status Programme Number , Programme Name (or EXT ), (they are displayed on the upper left of the screen). The sound indicator is displayed with them too. They are displayed after programme change for 3 seconds. Sound Indicator The alternativ[...]

ENGLISH - 2 1 - No-Signal Detection (TV mode) If no valid signal detected, it takes 5 minutes to switch to the S tand-By mode unless any signal detected or any Remote Control com- mand is accessed. After a Remote Control command (if No-Sig- nal Timer is active) the timer stops and if no signal detected again the timer is initialized to 5 minutes an[...]

ENGLISH - 2 2 - P ANORAMIC: This stretches the left and right sides of a nor- mal picture (4:3 aspect ratio) to fill the screen, without making the picture appear unnatural. The top and bottom of the picture are slightly cut off. 14:9 ZOOM: This zooms up the wide picture (14:9 aspect ratio) to the upper and lower limits of the screen. 16:9 ZOOM: Th[...]

ENGLISH - 2 3 - Auto Position If you shift the picture horizontally or vertically to an unwanted position, use this item to put the picture into correct place automatically .  Select Auto position item by using   or   buttons.  Press  OK  button.  Press  MENU  button or  BACK  button to store the value. W arni[...]

ENGLISH - 2 4 - Sound in PC mode  Connect the PCs Audio output to the TVs PC Audio In socket with an audio cable. T eletext T eletext is an information system that displays text on your TV screen. Using the T eletext in- formation system you can view a page of in- formation on a subject that is available in the list of contents (index). On[...]

ENGLISH - 2 5 -  Select the required subcode page number by pressing four digit buttons (e.g. 0001).  If the selected subcode page is not displayed in a short time, press   button. TV programme will be displayed on the screen.  T eletext page number will be displayed on the upper left corner of the screen when the selected page is fo[...]

ENGLISH - 2 6 - Via the ANT (aerial) socket If your equipment does not have an Eurocon- nector or RCA jacks, connect it to the TV with an aerial cable. For details, see the manual provided with the equipment.  T o store the test signal that comes from the equipment, see  Install Menu  on page 17 and store it to the program number 0. Y ou c[...]

ENGLISH - 2 7 - Peripheral Equipment Connections ENG-(LT-17B60SU)_IB.p65 30.09.2005, 12:50 27[...]

ENGLISH - 2 8 - Peripheral Equipment Connections DECODER FOR SA TELLITE RECEIVER VIDEO HEADPHONE AUDIO Antenna Connections ENG-(LT-17B60SU)_IB.p65 30.09.2005, 12:50 28[...]

ENGLISH - 2 9 - PC Input T ypical Display Modes The display has a maximum resolution of 1280 x 768, vertical sync. frequency range of 50-75 Hz and a horizontal sync. frequency range of 30-69 KHz. The following table is an illustration of some of the typical video display modes. +RUL ] RQW DO 9H UWL FD O +RU  N +]  9H U +]  ?[...]

ENGLISH - 3 0 - Tips Can not turn the TV on? Check that TV/VCR/DVD switch is set to TV position. TV may go to stand-by mode when you turn the TV on soon after you turn the TV off. If you can turn the TV on again, it is not a problem. Can not turn the TV off? Check that TV/VCR/DVD switch is set to TV position. Care of the Screen Clean the screen wit[...]

ENGLISH - 3 1 - Specifications Broadcasting Systems P AL SECAM BG , DK, I, L, Lp Channels and VHF (VL) : 46,25 MHz - 168,25 MHz Frequencies VH F (VH) : 175,25 MHz - 463,25 MHz UHF : 471,25 MHz - 863,25 MHz Cable TV : (S1-S20 / S21-S41) Input Signal Video: Analog 0,7 Vp-p 75 ohm positive Sync: TTL Level positive or negative, Seperate sync. Horizonta[...]