JVC LVT1372-003A manual

ENGLISH FRANÇAIS CD/SD RECEIVER RECEPTEUR CD/SD For canceling the display demonstration, see page 9. Pour annuler la démonstration des affichages, référez-vous à la page 9. For installation and connections, refer to the separate manual. Pour l’installation et les raccordements, se référer au manuel séparé. INSTRUCTIONS MANUEL D’INSTRUC[...]

2 ENGLISH How to reset your unit This will reset the microcomputer. Your preset adjustments will also be erased. Notice: The display window built in this receiver has been produced with high precision, but it may have some ineffective dots. This is inevitable and is not malfunction. Warning: If you need to operate the receiver while driving, be sur[...]

3 ENGLISH How to reset your unit ........................... 2 How to read this manual ........................ 4 How to forcibly eject a disc ................... 4 How to change the display pattern ........ 5 How to enter the various menus ............ 5 Control panel — KD-SHX851 ...... 6 Parts identification ................................. 6 [...]

4 ENGLISH How to read this manual The following methods are used to make the explanations simple and easy-to-understand: • Some related tips and notes are explained in “More about this receiver” (see pages 55 – 59). • Button operations are mainly explained with the illustrations as follows: Press briefly. Press repeatedly. Press either on[...]

5 ENGLISH How to enter the various menus The main menu contains the following menus—MODE, PSM, SEL, PICT, DSP, CCC, TITLE, EQ, and BBE. 1 2 Move the cursor to select a menu you want (MODE, PSM, SEL, PICT, DSP, CCC, TITLE, EQ, BBE). • To go back to the previous screen, press BACK. * Works as time countdown indicator. 3 Enter the selected menu. E[...]

6 ENGLISH Control panel — KD-SHX851 Parts identification 1 T/P (traffic programme/programme type) button • Turns on/off TA (Traffic Announcement) Standby Reception (see page 15) if pressed. • Displays the PTY operation screen (see page 13) if pressed and held. 2 0 (eject)/ (angle) button • Ejects the disc if pressed. • Adjusts the control[...]

7 ENGLISH Remote controller — RM-RK300 Main elements and features 1 (standby/on/attenuator) button Turns on and off the power and also attenuates the sound. 2 SOURCE button Selects the source. 3 5 (up) / ∞ (down) buttons • For DAB: Changes the services. • For MP3/WMA discs or an SD card: Changes the folders. 4 VOL (volume) + / – buttons A[...]

8 ENGLISH When activating or deactivating crossover network (see page 32), perform before turning on the power. ~ Turn on the power. Ÿ You cannot select some sources if they are not ready. ! • For FM/AM tuner • For DAB tuner ⁄ Adjust the volume. @ Adjust the sound as you want. (See pages 25 – 35.) To drop the volume in a moment (ATT) To re[...]

9 ENGLISH Setting the clock 1 Enter the PSM menu (see page 5). 2 Set the hour, minute, and clock system. 1 Select “Clock Hr” (hour), then adjust the hour. 2 Select “Clock Min” (minute), then adjust the minute. 3 Select “24H/12H,” then select “24H” or “12H.” 3 Finish the procedure. Canceling the display demonstration If no operat[...]

10 ENGLISH When a station is received, searching stops. To stop searching, press the same button again. To tune in to a station manually In step ! on the left... When an FM stereo broadcast is hard to receive 1 Enter the MODE menu (see page 5). 2 Select “Mono.” 3 Select “On.” Radio operations ~ Ÿ * 1 AF or REG indicator: See page 43. * 2 L[...]

11 ENGLISH 4 Finish the procedure. indicator lights up. Reception improves, but stereo effect will be lost. To restore the stereo effect, repeat the same procedure and select “Off” in step 3 . indicator goes off. To tune in FM stations only with strong signals—LO/DX (Local/ Distance-extreme) If received signals are weak, you may only hear noi[...]

12 ENGLISH Manual presetting Ex.: Storing FM station of 92.5 MHz into preset number 3 of the FM1 band. 1 2 • If you hold 5 / ∞ , the Preset Station List will appear (see step 7 below). 3 4 Enter the MODE menu (see page 5). 5 Select “List.” 6 7 Select a preset number. • You can move to the lists of the other FM bands by pressing 4 / ¢ ( /[...]

13 ENGLISH You can tune in to a station broadcasting your favorite programme by searching for a PTY code. • To store your favorite programme, see page 14. ~ Ÿ • Make sure “PTYSearch” is selected (highlighted). FM RDS operations Searching for your favorite FM RDS programme ! Select a PTY code. • You can move to the other lists by pressing[...]

14 ENGLISH 2 Select “PTYMemory.” 3 4 Select a preset number. 5 Select a PTY code. 6 Store the setting. 7 Repeat steps 4 to 6 to store other PTY codes into other preset numbers. 8 Finish the procedure. What you can do with RDS RDS (Radio Data System) allows FM stations to send an additional signal along with their regular programme signals. By r[...]

15 ENGLISH Using the Standby Receptions TA Standby Reception TA Standby Reception allows the receiver to switch temporarily to Traffic Announcement (TA) from any source other than AM. The volume changes to the preset TA volume level (see page 43). • If the DAB tuner is connected, Standby Reception also works to search for a DAB service broadcasti[...]

16 ENGLISH Tracking the same programme— Network-Tracking Reception When driving in an area where FM reception is not sufficient enough, this receiver automatically tunes in to another FM RDS station of the same network, possibly broadcasting the same programme with stronger signals (see the illustration on the right column). When shipped from the[...]

17 ENGLISH About MP3 and WMA discs • When an MP3 or a WMA folder includes an image <jpw> file edited by Image Converter (Color Ver. 2.0)—supplied in the CD-ROM, you can show the image on the display while the tracks in the folder are played back—ImageLink. (See pages 41 and 58 for details.) • MP3 and WMA (Windows Media ® Audio) “tr[...]

18 ENGLISH Playing discs in the CD changer • When the current disc is an MP3 disc: • When the current disc is an audio CD or a CD Text disc: * 1 The album name/performer with indicator and the track title with indicator will appear if “Tag” is set to “On” (see page 43). * 2 Appears only for CD Texts and CDs if it has been recorded or as[...]

19 ENGLISH Playing an SD card To be continued.... About the SD card • When an MP3 or a WMA folder includes an image <jpw> file edited by Image Converter (Color Ver. 2.0)—supplied in the CD-ROM, you can show the image on the display while the tracks in the folder are played back—ImageLink. (See pages 41 and 58 for details.) • The requi[...]

20 ENGLISH ! Attach the control panel. ⁄ • The control panel goes back to the previous position (see page 47). Playback starts automatically if tracks are recorded. If an SD card has been loaded.... 1 2 * The album name/performer with indicator and the track title with indicator will appear if “Tag” is set to “On” (see page 43). Track n[...]

21 ENGLISH To fast-forward or reverse the track Fast-forwards. Reverses. To go to the next or previous tracks To the following tracks. To the beginning of the current track, then the previous tracks. To go to the next or previous folders (only for MP3 and WMA tracks) For MP3 tracks: For WMA tracks: To next folders. To previous folders. • Holding [...]

22 ENGLISH To select a file To start playback When using the remote controller... • To directly select a disc ( ) • To directly select a track of an audio CD or a CD Text ( ) • To directly select an MP3/WMA folder ( / ) To select a number from 1 – 6: To select a number from 7 (1) – 12 (6): • For MP3/WMA folders: It is required that fold[...]

23 ENGLISH To be continued.... Selecting the playback modes You can use only one of the following playback modes at a time. 1 Enter the MODE menu (see page 5). 2 Select one of the playback modes — “Intro,” “Repeat,” or “Random.” 3 Select your desired playback modes. • For details, see table on page 24. 4 Finish the procedure. Prohib[...]

24 ENGLISH Intro play Ex.: When “Track” is selected while playing an MP3 disc in the receiver Mode Plays the beginning 15 seconds of... Tr a c k : All tracks of the current disc or the SD card. • While playing, lights up. Fold er * 1 : First tracks of all folders of the current disc or the SD card. • While playing, lights up. Disc * 2 : Fir[...]

25 ENGLISH Sound adjustments — Daily use Selecting the DSP modes —DSP ! Adjust the effect level (1 – 3). • For “Defeat” and “V.Cancel,” the effect level is not adjustable. • As the number increases, the effect level becomes stronger. • To finish the procedure • To make further precise settings See page 26. To cancel the acou[...]

26 ENGLISH To make further precise settings for the DSP modes Setting items: The number of the built-in speakers: Select the number of the speakers built in your car—“2ch” or “4ch.” Time alignment: Set the distance between each speaker and the listening seat position. 1 Repeat steps ~ to ! on page 25 to select DSP mode. 2 Select the numbe[...]

27 ENGLISH Making sound natural To activate Compression Compensative (CC) Converter CC Converter eliminates jitter and ripples, achieving a drastic reduction in digital distortion. This processing can be applied to the analog sources as well as the digital sources; therefore, you can obtain a natural sound field from any source. 1 Enter the CCC men[...]

28 ENGLISH Using equalizer —EQ MENU You can adjust the sound equalization patterns to your preference by using two EQ modes— Graphic EQ and Parametric EQ. Graphi c EQ : You can select a preset sound mode suitable to the music genre. You can also store your own adjustments in memory. Param etric EQ : You can adjust the enhanced level, bandwidth,[...]

29 ENGLISH 2 Select a sound mode. Ex.: When “Flat” is selected 3 Finish the procedure. Selecting preset sound modes —Graphic EQ Available sound modes Flat (No sound mode is applied) , Hard Ro ck, R& B (Rhythm&Blues) , Pop, J az z, D anc e, Co unt ry, Reg gae , Classic, User 1 , User 2 , User 3 • For User 1/2/3, you can store your ow[...]

30 ENGLISH Storing your own sound modes 1 Follow steps ~ to ! on page 28. • In step Ÿ , select “Graphic.” 2 Select a sound mode . Ex.: When “Flat” is selected 3 4 Select the frequency band—63 Hz, 125 Hz, 250 Hz, 500 Hz, 1 kHz, 2 kHz, 4 kHz, 8 kHz, 12.5 kHz. 5 Adjust the enhanced level for the selected frequency band within the range of[...]

31 ENGLISH 5 Select the frequency (adjustable between 20 Hz – 20 kHz). • Band 1/2/3 are required to be preset at least 5 steps (frequencies) away from each other. (Only selectable frequencies are shown on the display.) Ex.: When “1 kHz” is selected for “Band2” 6 Select the band width (Q)— 0.7/1/2/3/4/5. • To adjust the other bands, [...]

32 ENGLISH 3 Finish the procedure. • indicator lights up (in sequence with other indicators). To cancel Crossover Repeat the same procedure. Make sure that “Crossover Off?” appears on the display in step 1 and “Crossover Off OK?” in step 2 . • indicator goes off. Adjustable items for crossover network You can adjust the following parame[...]

33 ENGLISH Setting the basic sound selection menu—SEL MENU ! Adjust the selected setting item. • To adjust other SEL settings, press BACK. Then repeat steps Ÿ and ! . ⁄ Finish the procedure. You can adjust the sound characteristics to your preference. ~ Enter the SEL menu (see page 5). Ÿ Select a setting item—“Fad/Bal,” “Crossover *[...]

34 ENGLISH Select “ON” or “OFF.” • If you connect high-range speakers to Front or Rear output, select “ON” for the corresponding HPF; otherwise, the speakers may be damaged. • ON / OFF ON : Activates the filter. Press to adjust reproduced frequency level and slope (see below). OFF : Deactivates the filter. Press . “Filter Off [...]

35 ENGLISH To adjust subwoofer output— Subwoofer To a d j u s t s u bwoofer lev el Adjust the subwoofer output level. • 00 (min.) to 12 (max.) • Press to adjust reproduced frequency level and slope. To s e l e c t the cut o ff f requ enc y Select an appropriate cutoff frequency level according to the subwoofer connected. • 31.5 H z to 20 0 [...]

36 ENGLISH ! Select the picture size—“Large” or “Small.” ⁄ @ Select the item. Ex.: When “Delete” is selected • To download the file(s): “Download” (see page 37) • To delete the file(s): “Delete” (see page 38) • To delete all files: “AllDelete” (see page 39) • To activate the file(s): Activating the downlo[...]

37 ENGLISH 2 Select the file type—either “Picture” or “Movie.” The Folder List appears. 3 Select a f older . • You can move to the other lists by pressing 4 / ¢ ( / ) . The File List appears. 4 Select a file. • You can move to the other lists by pressing 4 / ¢ ( / ) . IMPORTANT: • Refer also to Image Converter PDF files included i[...]

38 ENGLISH 5 Download the file. • To cancel downloading, press DISP. • When download is complete, the File List appears again. 6 • To download more pictures from the same folder, repeat steps 4 and 5 . • To download more pictures from another folder, press BACK. Then, repeat steps 3 to 5 . 7 Finish the procedure. Deleting the fi les Deleti[...]

39 ENGLISH 4 Ex.: When “Large” is selected for the picture size 5 • When all pictures are deleted, the PICT menu appears again. 6 Finish the procedure. To delete all the stored files You can delete all stored pictures and animations of each size (“Large” or “Small”). 1 Follow steps ~ to @ on page 36. • In step ! , select the picture[...]

40 ENGLISH Activating the downloaded files 1 Enter the PSM menu (see page 5). 2 Select “PICT.” 3 Select the picture size you want to activate—“Large” or “Small.” 4 * If there is no still images or animation downloaded, you can only select “Default.” Large Small 5 Pict ure : One of your edited still images stored in “Picture” i[...]

41 ENGLISH 3 Adjust the setting. 4 Repeat steps 2 and 3 to adjust the other PSM items if necessary. 5 Finish the procedure. General settings — PSM Basic procedure You can change PSM (Preferred Setting Mode) items listed in the table that follows. 1 Enter the PSM menu (see page 5). 2 Select a PSM item. Ex.: When “Scroll” is selected Indication[...]

42 ENGLISH Indications Selectable settings, [reference page] Clock Hr Clock hour 0 – 23 (1 – 12), [9] [Initial: 0 (0:00)] Clock Min Clock minute 00 – 59, [9] [Initial: 00 (0:00)] 24H /12H Clock system 12H (Hours) O 24H (Hours), [9] [Initial: 24H] Clock Adj Automatic clock adjustment Aut o: [Initial]; The built-in clock is automatically adjust[...]

43 ENGLISH Indications Selectable settings, [reference page] Bright Brightness 1 – 8 : Adjust the display brightness to make the display indications clear and legible. [Initial: 8] Ta g Tag display On: [Initial]; To show the ID3 tag display while playing MP3/WMA tracks, [17, 18, 20]. Off: Cancels. PT yStandby PTY Standby You can select one of the[...]

44 ENGLISH Indications Selectable settings, [reference page] DAB A F * 1 Alternative Frequency Reception On : [Initial]; Traces the programme among DAB services and FM RDS stations, [53]. • The AF indicator lights up. Off : Cancels. Announce * 1 Announcement Standby Reception Select one of the 9 announcement types for Announcement Standby Recepti[...]

45 ENGLISH 4 Enter the Time Set screen. 5 Adjust the dimmer time. 1 Set the dimmer start time. 2 Set the dimmer end time. 6 Finish the pr ocedure. Selecting the dimmer mode You can dim the display at night or as you set the timer. 1 Enter the PSM menu (see page 5). 2 Select “Dimmer.” 3 Select a setting. Aut o: Dims the display when you turn on [...]

46 ENGLISH 2 Select a character. • For available characters, see page 54. 3 Move to the next (or previous) character position. 4 Repeat steps 1 to 3 until you finish entering the title. 4 Finish the procedure. • To cancel the title entry without registration, press MENU. To erase the entire title In step 3 on the left... Assigning titles to the[...]

47 ENGLISH Detaching the control panel When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder. Detaching the control panel Before detaching the control panel, be sure to turn off the power. Attaching the control panel Angle 2 Angle 4 Angle 1 Angle 3 Changing th[...]

48 ENGLISH External component operations Playing an external component EXT-IN: For selecting the external component connected to the CD changer jack. • If you have changed the “Ext Input” setting to “Changer” (see page 44), you cannot select “EXT-IN.” Ÿ Turn on the connected component and start playing the source. ! Adjust the volume[...]

49 ENGLISH DAB tuner operations Listening to the DAB tuner ~ Ÿ * 1 ANN indicator: See page 52. * 2 AF indicator: See page 44. * 3 DRC indicator: See page 50. ! Start searching for an ensemble. When an ensemble is received, searching stops. To stop searching, press the same button again. ⁄ Select a service (either primary or secondary) to listen [...]

50 ENGLISH 3 Select one of the DRC signal levels (1, 2, or 3). The reinforcement level increases from 1 to 3. 4 Finish the procedure. DRC indicator appears. • The DRC indicator will be highlighted only when receiving DRC signals from the tuned service. To search for your favorite service You can search for either Dynamic or Static PTY codes. • [...]

51 ENGLISH • If you press 4 / ¢ ( / ) , you can display the lists of the other DAB bands, but cannot store a service for the other bands. 8 Store the service. When using the remote controller... After tuning in to a service you want to preset Tuning in to a preset DAB service 1 2 3 Perform steps 4 to 7 (on the left column) to enter the Preset Se[...]

52 ENGLISH To activate the Announcement Standby Reception 1 Enter the MODE menu (see page 5). 2 Select “Announce.” 3 Select an announce type. 4 Finish the procedure. ANN indicator appears. • If the ANN indicator lights up, Announcement Standby Reception is activated. • If the ANN indicator flashes, Announcement Standby Reception is not yet [...]

53 ENGLISH Tracing the same programme— Alternative Frequency Reception You can keep listening to the same programme by activating the Alternative Frequency Reception. • While receiving a DAB service: When driving in an area where a DAB service cannot be received, this receiver automatically tunes in to another ensemble or FM RDS station, broadc[...]

54 ENGLISH To keep discs clean A dirty disc may not play correctly. If a disc does become dirty, wipe it with a soft cloth in a straight line from center to edge. • Do not use any solvent (for example, conventional record cleaner, spray, thinner, benzine, etc.) to clean discs. To play new discs New discs may have some rough spots around the inner[...]

55 ENGLISH More about this receiver Basic operations Turning on the power • By pressing SOURCE on the receiver, you can also turn on the power. Turning off the power • If you turn off the power while listening to a disc, disc play will start from where playback has been stopped previously, next time you turn on the power. Selecting the source ?[...]

56 ENGLISH Disc/SD card operations Caution for DualDisc playback • The Non-DVD side of a “DualDisc” does not comply with the “Compact Disc Digital Audio” standard. Therefore, the use of Non- DVD side of a DualDisc on this product may not be recommended. General • This receiver has been designed to reproduce CDs/CD Texts, and CD-Rs (Reco[...]

57 ENGLISH To be continued.... Playing an MP3/WMA track • This receiver can play back MP3/WMA files with the extension code <.mp3> or <.wma> (regardless of the letter case—upper/lower). • This receiver can show the names of albums, artists (performer), and ID3 Tag (Version 1.0, 1.1, 2.2, 2.3, or 2.4) for MP3 files and for WMA file[...]

58 ENGLISH Sound adjustments — Daily use Selecting the DSP modes—DSP • Effectiveness of “V.Cancel” depends on the recording condition of the sources. Especially, if you play back the following sources you cannot get the satisfactory results. – Monaural sources such as AM and monaural FM broadcasting programs, – Multiplex sound sources[...]

59 ENGLISH General settings — PSM • To set the “PICT” setting as you like, download the required files before setting. If “Default” (for “Picture” and “Movie”) and “No Slide” (for “Slideshow”) cannot be changed to other options, required files have not been downloaded. • “Auto Dimmer” may not work correctly on some[...]

60 ENGLISH Symptoms Causes Remedies General • Sound cannot be heard from the speakers. The volume level is set to the minimum level. Adjust it to the optimum level. Connections are incorrect. Check the cords and connections. • The receiver does not work at all. The built-in microcomputer may have functioned incorrectly due to noise, etc. Reset [...]

61 ENGLISH To be continued.... Symptoms Causes Remedies MP3/WMA disc/SD card playback • “No Files” appears for a while, then the disc ejects. No MP3/WMA tracks are recorded. Change the disc or the SD card. MP3/WMA tracks do not have the extension code <.mp3> or <.wma> in their file names. Add the extension code <.mp3> or <[...]

62 ENGLISH Symptoms Causes Remedies Sounds • DSP mode cannot be selected other modes than “Defeat.” Crossover network is activated. Deactivate crossover network (see page 32). • Only high range sound or low range sound is reproduced though full range speakers are connected. Crossover network is activated. Deactivate crossover network (see p[...]

63 ENGLISH Symptoms Causes Remedies DAB tuner • “No DAB Signal” appears on the display. Signal is too weak. Search for another ensemble. • “Reset 08” appears on the display. This receiver is not connected to the DAB tuner correctly. Connect this receiver and the DAB tuner correctly and reset the receiver (see page 2). • The DAB tuner [...]

64 ENGLISH Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front: 70 W per channel Rear: 70 W per channel Continuous Power Output (RMS): Front: 35 W per channel into 4 Ω , 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion. Rear: 35 W per channel into 4 Ω , 40 Hz to 20 000 Hz at no more than 0.8% total harmonic disto[...]

65 ENGLISH CD/SD PLAYER SECTION Type: Compact disc player Signal Detection System: Non-contact optical pickup (semiconductor laser) Number of Channels: 2 channels (stereo) Frequency Response: 5 Hz to 20 000 Hz Dynamic Range: 98 dB Signal-to-Noise Ratio: 102 dB Wow and Flutter: Less than measurable limit MP3 (MPEG Audio Layer 3): Max. Bit Rate: 320 [...]

© 2005 Victor Company of Japan, Limited EN, FR 0405MNMMDWJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Vous avez des PROBLÈMES de fonctionnement? Réinitialisez votre appareil Référez-vous à la page intitulée Comment réinitialiser votre appareil Rear_KD-SHX851[X_EU]f.indd 2 Rear_KD-SHX851[[...]

1 LVT1372-010A [EX, EU] ENGLISH This unit is designed to operate on 12 V D C , NEGA TI VE grou nd el ec tric al syst ems . If your vehicle does not have this system, a voltage inverter is required, which can be purchased at JVC IN-CAR ENTERTAINMENT dealers. Parts list for installation and connection The following parts are provided for this unit. A[...]

2 ELECTRICAL CONNECTIONS To prevent short circuits, we recommend that you disconnect the battery’s negative terminal and make all electrical connections before installing the unit. • Be sure t o grou nd th is un it to th e ca r’s chas sis a gai n af ter i nst all ati on. Notes: • Replace the fuse with one of the specified rating. If the fus[...]

3 B Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause serious damage to this unit. The leads of the power cord and those of the connector from the car body may be different in color. 1 Cut the ISO connector. 2 Connect the colored leads of the power cord in the order specified in the illustration below. 3 C[...]

4 ENGLISH FRANÇAIS Connecting to the steering wheel remote controller / Connexion de la télécommande de volant C If your car is equipped with the steering wheel remote controller, you can operate this unit using the controller. To do it, a JVC’s OE remote adapter (not supplied) which matches with your car is required. Consult your JVC IN-CAR E[...]

5 E Speaker connections for 3-way network speaker system / Connexion des enceintes pour un système d’enceintes à 3 voies You can enjoy a world of “pure audio” in your car by connecting 3-way network speaker system (high-range/mid-range/subwoofer). IMPORTANT: If you have installed the 3-way network speaker system in the car, make sure of the[...]

6 F External Component / Appareil extérieur CD changer and DAB tuner / Changeur de CD et tuner DAB CAUTION / PRECAUTION: • Before connecting the CD changer and/or DAB tuner, make sure that the unit is turned off. • Avant de connecter le changeur de CD et/ou le tuner DAB, s’assurer que l’unité est éteinte. * 6 Connecting cord supplied for[...]