JVC MP-XP7210GB manual

LET0207-002A INSTRUCTIONS Before Use Read and follow the instructions of this manual to use your Mobile mini note PC correctly. Always read the "Safety Precautions" and "Operation Notes." Keep this manual and the warranty card for further reference. Thank you for purchasing the JVC MP-XP7210GB/MP-XP3210GB Mobile mini note PC. 20[...]

2 EN It is recommended that you . . . .... read thoroughly the Safety Precautions. They contain extremely important information regarding the safe use of this product. SAFETY PRECAUTIONS NOTES: ● The rating plate (serial number plate) and safety caution are on the bottom and/or the back of the main unit. ● The rating information and safety caut[...]

EN 3 CAUTIONS: ● This Mobile mini note PC is designed to be used with the JVC BN-LS1 1E/LL21E battery packs and, to recharge them or to supply power to the Mobile mini note PC from an AC outlet, use the provided AC Adapter and Power Cord. (An appropriate conversion adapter may be necessary to accommodate different designs of AC outlets in differe[...]

4 EN CAUTION T o reduce the risk of fire, use only No. 26 A WG or larger telecommunication line cord. IMPORT ANT SAFETY INSTRUCTIONS: 1. A void using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. 2. Do not use the telephone to report a gas leak in the vicinity of th[...]

EN 5 Lithium-ion is vulnerable in colder temperatures. About Batteries DANGER! Do not attempt to take the batteries apart, or expose them to flame or excessive heat, as it may cause a fire or explosion. W ARNING! Do not allow the battery or its terminals to come in contact with metals, as this can result in a short circuit and possibly start a fire[...]

6 EN • Mobile mini note PC • MP-ACX1 AC power adapter • Application CD-ROM • Instruction manual (this book) • BN-LS1 1E standard lithium ion battery pack • W arranty card CHECKING INVENTOR Y Before using your Mobile mini note PC (hereinafter Mobile PC), make sure that all of the following system components have been included in the cont[...]

EN 7 JVC Software License Agreement Important: Thank you for purchasing JVC Mobile mini note PC ("Product"). Please carefully read this End-User License Agreement ( “ Agreement ” ) before installing or using JVC original software accompanied with or pre-installed into the Product ( “ Software ” ). The right to use the Software is [...]

8 EN 5. Limited W arranty (1) THE SOFTW ARE IS PROVIDED “AS IS” WITHOUT W ARRANTY OF ANY KIND. SHOULD THERE BE ANY PROBLEM ARISING FROM OR CAUSED BY THE SOFTW ARE, YOU SHOULD SETTLE ALL SUCH PROBLEM A T YOUR OWN COSTS AND RESPONSIBILITIES. (2) THIS SECTION PROVIDES JVC’S EXCLUSIVE W ARRANTY REGARDING THE SOFTW ARE. JVC DOES NOT MAKE ANY OTHER[...]

EN 9 END-USER LICENSE AGREEMENT Important: Please carefully read this End-User License Agreement ("Agreement") before installing or using the G.726 Decoder ("Software") on your PC. The right to use the Software is granted by V ictor Company of Japan, Limited ("JVC") to Y ou only on the condition that Y ou agree to the [...]

10 EN SOFTW ARE, YOU SHOULD SETTLE ALL SUCH PROBLEMS A T YOUR OWN COST AND RESPONSIBILITY . 6. Limitation of Liability JVC WILL HA VE NO LIABILITY WITH RESPECT T O ITS OBLIGA TIONS UNDER THIS AGREEMENT OR OTHERWISE FOR CONSEQUENTIAL, EXEMPLAR Y , INCIDENT AL OR PUNITIVE DAMAGES EVEN IF IT HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. YOU WIL[...]

EN 11 T able of contents SAFETY PRECAUTIONS ....................................... 2 SOME DO ’ S AND DON ‘ TS ON THE SAFE USE OF EQUIPMENT .......................................... 3 CAUTIONS .......................................................... 5 CHECKING INVENT ORY ..................................... 6 JVC Software License Agreement [...]

12 EN P ARTS AND COMPONENT NAMES Y our Mobile PC has the following parts and components. Built-in lithium ion battery pack Display panel Buckle i-Link connector (MP-XP7210 only) RESET button Keyboard Speakers V entilation slots PC card slot SD card slot PC card eject button Stick Scroll button Headphone output Microphone input USB connectors Extern[...]

EN 13 SETTING UP XP7210/3210-2-20 02.8.6, 8:22 PM 13[...]

14 EN SETTING UP When you first use your Mobile PC, always plug the AC power cord into the DC Input connector. The built-in lithium-ion battery pack will be recharged during your PC setup. T o avoid data loss due to power failure or any others cause, check the points for battery recharging in Page 16. 1. Unplug the jumper pin before recharging the [...]

EN 15 3. Open the display panel Buckle 1 Slightly pull up the buckle of the Note PC, and the display panel will be unlocked. 2 Carefully open the display panel to the desired angle. Y ou can open the display panel to 180 degrees. 4. Recharge the built-in battery pack by plugging the AC cord into DC Input connector When recharging the built-in batte[...]

16 EN 5. Make sure that the battery pack is fully charged T o avoid an interruption of your operation due to power failure, check the battery voltage when you start to use your PC in the field. See "Checking the battery level" (see Page 61) to check the battery voltage level. ¡ Make sure that the battery pack is fully recharged When you [...]

EN 17 TURN-ON T urning (On/Of f) Key On Press the (On/Off) key . The PC will turn on and the W indows logo will appear . 1 2 SD 1 A Cautions ¡ T urn Off the PC (On/Off) key in areas such as hospitals and aircraft where use of the PC is prohibited. Otherwise, your PC may influence the electronics and medical equipment and may cause a serious proble[...]

18 EN Initial Setup of Microsoft Windows When using your PC for first time, you must prepare to use Microsoft W indows. Once you have finished the initial W indows setup, you can use the software and various PC functions. Use the following procedure to initially set up Microsoft W indows. For pointing device and keyboard operations, see Pages 48 to[...]

EN 19 6. Enter the user name and click [Next]. The "Thank you!" screen will appear . Tip s The name you have entered is shown on the "welcome" screen that appears when you turn the PC power switch on after initial W indows setup. T o start up Microsoft W indows, click the user name shown on the screen. 7. Click [Finish]. The ini[...]

20 EN T urn-Off Cautions • Always use this procedure to turn off the PC. Otherwise, your PC may fail. 1. Click [start]. The "start" menu will appear . 2. Click [T urn Of f computer]. The "T urn off computer" screen will appear . 3. Click [T urn Off]. The PC will be turned off automatically , and (Stand By) lamp will go out. Be[...]

EN 21 JVC ORIGINAL SOFTW ARE AND SYSTEM APPLICA TIONS XP7210/3210EN-21-29 02.8.6, 7:51 PM 21[...]

22 EN JVC ORIGINAL SOFTW ARE AND SYSTEM APPLICA TIONS JVC ORIGINAL SOFTW ARE T o use the JVC original software, you must set it up in the "Original Software Setup Procedure" given below . Y ou can setup the following software programs. Setup software • CC converter (See Page 25.) • JVC’ s DVC (Digital V ideo Camera) utilities Tip s [...]

EN 23 4. When the software has been set up, a prompt for PC restarting appears. Click [Finish] to restart the PC. Cautions This setup cannot install all DVC utilities. After you have set up the original software, plug the DVC cable into the USB socket of your PC. The device type will be recognized automatically and setup of its USB driver will star[...]

24 EN 1 Click [Continue Anyway]. 2 The driver will be installed automatically . 3 When "Completing the Found New Hardware W izard" message appears, click [Finish]. 2) If "The hardware: JVC W eb Camera" message appears: 1 Click [Continue Anyway]. 2 The driver will be installed automatically . 3 When "Completing the Found New[...]

EN 25 CC Converter This is a data-band expansion system JVC has developed for audio applications. It reproduces the timbre of the original sound from high-quality and compressed music data as well. The CC converter operates as a system filter so that it takes effect regardless of the playback application. T o make the ef fect valid or invalid or to[...]

26 EN The following menu options are effective only when you have checked the "Enable" option. ¡ More presence The CC converter functions to have the maximum effect. ¡ Standard The CC converter functions to have the standard sound effect. Usually , use this setup option. ¡ More natural The CC converter functions to reproduce the origin[...]

EN 27 ST ANDARD APPLICA TION Y our Mobile PC has the following standard applications. Open the Help menu of each application to check the application usage. If you have any question, contact the nearest support centre listed on Page 82. ¡ Acrobat Reader 5.0 Can display and print out a PDF file. Using the Acrobat Reader , you can display and print [...]

28 EN JVC ORIGINAL SOFTW ARE AND SYSTEM APPLICA TIONS T o Set Up the Standard Applications Again Y ou can set up the standard applications using the Application CD-ROM. (The optional CD- ROM drive is required.) If you have erroneously deleted any of the standard applications, you can reinstall it from the Application CD-ROM. For details, see the &q[...]

EN 29 NA VIGA TE IN THE INTERNET WORLD! XP7210/3210EN-21-29 02.8.6, 7:51 PM 29[...]

30 EN NA VIGA TE IN THE INTERNET WORLD! TO CONNECT TO THE INTERNET Y ou must contract with an Internet service provider . Also, you need to have a telephone line to be connected to the service provider . Contracting with the Internet Service Provider An Internet service provider (an enterprise or an organization that provides the Internet connectio[...]

EN 31 Connection of T elephone Line and Modem Setup Y our PC has a built-in modem and a cable attached to it. Y ou can enjoy the Internet and e-mail services by simply connecting your PC to the telephone line. 1. Plug the attached modem cable into the Modem jack of your PC until it clicks. Insert the cable connector into the jack in the correct dir[...]

32 EN 3. Seting up the modem 1 Click [start] and [Control Panel] in this order . 2 Click [Printers and Other Hardware]. 3 Click [Phone and Modem Options]. 4 When the "Location Information" screen appears, enter a city code in the "area code" field. Usually , enter your city code here. Enter the phone company ID number and extens[...]

EN 33 The Internet Connection Setup Use the following procedure to connect your PC to the Internet network. This setup example uses the built-in modem of your PC and Microsoft ’ s Internet Explorer (IE) for the Internet connection. If you have already contracted with a provider , you can manually set up the Internet connection using the following[...]

34 EN 3. Click [Connect to the Internet] option, and click [Next]. The "Getting Ready" screen will appear . 4. Click [Set up my connection manually] option, and click [Next]. The "Internet Connection" screen will appear . 5. Click [Connect using a dial-up modem] option, and click [Next]. The "Connection Name" screen wi[...]

EN 35 7. Enter the phone number , and click [Next]. The "Internet Account Information" screen will appear . 8. Enter the User name and Password (and enter the password again for confirmation), and click [Next]. The "Completing the New Connection W izard" screen will appear . 9. Click [Finish]. The setup for connection wizard is [...]

36 EN Tip s If you need to set up the DNS server address, follow steps 10 to 20. Y ou may need to set up DNS server addresses (the primary and secondary DNS addresses) for some providers. If the DNS server addresses are stated on the documents sent from your provider , you need to set them up. If not specified, you need not set these addresses. 10.[...]

EN 37 15. Click [Networking]. 16. Click [Internet Protocol (TCP/IP)] and click [Properties]. The "Internet Protocol (TCP/IP) Properties" screen will appear . 17. Click [Obtain an IP address automatically], click [Use the following DNS server addresses], and enter the DNS server address printed on the document sent from the provider . 18. [...]

38 EN Connecting to the Internet After you have completed the "The Internet Connection Setup" procedure (pages 33 to 37), you can connect to the Internet. Use the following procedure. 1. Click [start] and click [Internet] at the upper left part of the Menu. The Internet Explorer will start up and the "Dial-up Connection" screen [...]

EN 39 Disconnection from the Internet When you are connected to the Internet, the use of the telephone line and the access to the provider are charged. Disconnect your PC from the Internet in one of the following ways when you are finished using the Internet. ¡ Double-click the task tray connection icon at the bottom right corner of the desktop sc[...]

40 EN Accessing a W eb Page There is a large number of W eb sites available. Y ou can access a W eb site using Microsoft ’ s Internet Explorer in your PC. The following shows three typical ways you can use to access a W eb site. Before starting the following steps, connect your PC to the Internet using the "Connecting to the Internet" p[...]

EN 41 E-MAILING Y ou need to set up a mailing software to send and receive E-mails. Setting up E-Mail Software Set up the E-mail transmission using the Outlook Express installed on your PC. Tip s It is convenient for E-mail setup if you have the document sent from the provider to hand. 1. Click [start] and click [E-mail] on the Menu. Outlook Expres[...]

42 EN NA VIGA TE IN THE INTERNET WORLD! 3. Enter your E-mail address in the "E-mail address" field, and click [Next]. The "E-mail Server Name" screen will appear . 4. Enter the "Incoming mail server" and "Outgoing mail server", and click [Next]. Usually select "POP3" as the "My incoming mail se[...]

EN 43 5. Enter the "Account name" and "Password," and click [Next]. The "Congratulations" screen will appear . 6. Click [Finish]. The "Congratulations" screen will close, and Outlook Express will start up. The setup for the E-mail software is complete. 7. T o quit Outlook Express, click [x] at the upper right[...]

44 EN NA VIGA TE IN THE INTERNET WORLD! Sending and Receiving E-mails Y ou can create and send E-mail messages, and receive and read E-mail from others. Y ou can learn procedures to enjoy E-mailing. Use Outlook Express installed on your PC for E-mail transmission. 1. Click [start] and click [E-mail] on the Menu. Outlook Express will start. 2. Click[...]

EN 45 3. Create a message. Destination: Enter the receiver's E-mail address. (Enter your E-mail address first to test E-mail transmission.) Title: Enter the message title. 4. Click [Send] at the left upper end of the screen to send the created message. The "Dial-up Connection" screen will appear . Tip s If you have already connected [...]

46 EN NA VIGA TE IN THE INTERNET WORLD! 7. T o check the received messages, click [Inbox] on the screen. The received E-mail messages will be displayed. 8. T o quit Outlook Express, click [x] at the upper right corner of the screen. Caution Disconnect your PC from the Internet after you have transmitted E-mail and finished accessing a W eb site. XP[...]

EN 47 HARDW ARE XP7210/3210EN-30-47 02.8.6, 7:53 PM 47[...]

48 EN Using the Pointing Device The pointing devices allow you to move the mouse pointer on the screen. Y ou can move the cursor using the centre stick and three buttons in the similar way as the mouse. ¡ Stick operations Usually operate the stick using your index finger . The mouse pointer moves in the direction you press the stick. Y ou can adju[...]

EN 49 • Double-click Press the mouse left button twice in succession and release it immediately . • Drag Use this operation to move an icon or a file. T o do so, select an icon or a file, hold down the mouse left button and move it to the desired position, and release the mouse button. Notes The pointing devices have initially been set for the [...]

50 EN HARDW ARE Using Hot keys Y ou can use the coloured hot keys of the PC keyboard. Hold down the Fn key and press one of the Hot keys to execute its command. List of hot keys F1 Reduces the screen brightness level. Use this command to reduce the brightness level if the screen is too bright. F2 Increases the screen brightness level. Use this comm[...]

EN 51 Increasing the (Optional) Memory Capacity Y ou can increase the PC memory capacity up to 384M bytes. For the built-in memory capacity , see the Product Specifications on Page 84. Y ou can reduce the application startup time and increase the data process speed by adding an optional memory board. Consult the JVC PC T echnical Support Centre lis[...]

52 EN HARDW ARE Adding or Removing a Memory Board I f you have operated your PC, its inside may be hot and you may get a burn. T urn the power switch off and wait for the PC to cool down. 1. T urn the PC Power switch of f, and disconnect AC adapter from your PC. Then, remove the standard lithium ion battery pack (if any) and all other peripherals f[...]

EN 53 1) Mounting a memory board 1 Check the correct mounting direction of memory board (by observing the cut area). 2 Slant the memory board and insert it into its socket. 3 Push the memory board until it is locked, but do not apply excessive for ce to it. Cautions If it is difficult to lock the memory board, make sure that the board has been inse[...]

54 EN HARDW ARE Checking the Additional Memory Board Use the following procedure to check the memory board installation. 1. T urn on your PC and start Windows. 2. Click [start] and select [Control Panel]. 3. Click the [Performance and Maintenance] icon. 4. Click the [System] icon. The "System Properties" screen will appear . 5. The total [...]

EN 55 Using the SD Memory Card Slot Y our PC has an SD memory card slot. An SD memory card or multimedia card can be used. When you use an SD memory card, remove the dummy card from the SD memory card slot. 1. Remove the dummy card. 2. Insert an SD memory card. Caution: Insert the SD card in the correct direction. Notes • The SD memory card and m[...]

56 EN HARDW ARE Using an External Display Unit T o attach an external display unit to your PC, use the JVC MP-VGX1E external display cable. Connecting an external monitor When you connect an external monitor to your PC, it looks like an ordinary desktop PC. Y ou can use the monitor by connecting it using the MP-VGX1E cable only . Y ou can display i[...]

EN 57 Connecting to a network W ith the network function, you can connect to a network at your office or home to transfer data between PCs and access the Internet from multiple PCs. For setting for intranet connection, consult a system administrator at your company . Connection to a network requires the following items. • LAN cable • Communicat[...]

58 EN HARDW ARE 4 Double-click [Local Area Connection]. The “ Local Area Connection Status ” screen will appear . 5 Click the [Properties] button. The “ Local Area Connection Properties ” screen will appear . 6 On the [General] tab, double-click [Internet Protocol (TCP/IP)]. The “ Properties of Internet Protocol (TCP/IP) ” screen will a[...]

EN 59 8 Click the [OK] button. A message prompting you to restart the computer will appear . 9 Click the [OK] button to make the change take effect. 0 Restart the computer . ¡ Checking the MAC address Use the following procedure to check the MAC address of the internal LAN card. Important T o check the MAC address, you have to set a LAN (local are[...]

60 EN HARDW ARE 5 Double-click [Local Area Connection]. The “ Local Area Connection Status ” screen will appear . 6 Click the [Support] tab and the [Details] button. The “ Network Connection Details ” screen will appear . 7 The MAC address is displayed as the “ Physical Address ” on the list. XP7210/3210EN-48-65 02.8.6, 7:57 PM 60[...]

EN 61 Checking the battery level On the “ Power Option Properties ” screen, click the [Power Meter] tab. The current total battery level is displayed. Use the following procedure. 1. Click the [start] button and [Control Panel]. 2. Click the [Performance and Maintenance] icon. 3. Click the [Power Options] icon. The [Power Option Properties] scr[...]

62 EN HARDW ARE Power-saving mode In compliance with the operation regulations of the International Ener gy Star Program, this unit enters the power -saving mode when no operation is performed for a certain period. On the [Power Schemes] tab in the “ Power Option Properties ” screen (page 61), you can specify the time that must expire before th[...]

EN 63 • System in standby status The built-in battery discharges whilst the PC is in system standby status. As a result, any unsaved data may be lost or the system may not start up. Be sure to turn off the PC when it is not used for a long time. Under fully charged condition, the unit can maintain the system standby status for the following perio[...]

64 EN Unknown partition on hard disk IMPORT ANT!! This PC reserves the image data required for recovery as a “ recovery area ” in the hard disk. If you accidentally delete a partition of the recovery area, you cannot recover it. The important points to keep in mind are: • DO NOT attempt to delete a hard disk area shown as an “ Unknown parti[...]

EN 65 PC RECOVER Y (REPEA TED PC SETUP) XP7210/3210EN-48-65 02.8.6, 7:57 PM 65[...]

66 EN PC RECOVERY (REPEA TED PC SETUP) Setting Up Y our PC Again Before starting Repeated PC Setup 1. What is the Recovery? When you return your PC to the original state during shipment, it is called "PC recovery ." Y ou can recover your PC in one of the following two ways. (1) Initialize the hard disk and restore all files. (2) Restore t[...]

EN 67 System Recovery Procedure 1. Hold down the Alt and F8 keys and press the Power button to start up your PC. When message "Do you wish to continue? (Y/N)" appears, respond with Y . Tip s If you respond with N, the recovery is canceled. The PC will restart and the W indows OS will start up. 2. Read the License Agreement when displayed.[...]

68 EN COMPUTER WIEDERHERSTELLUNG (RECOVER Y) 5. After the system recovery has been completed, the message "T urn Power switch off and restart the PC." appears. Restart your PC. Y our PC has been returned to the original state before shipment. 6. Set up the Windows OS by following the "Initial Setup of W indows OS " procedure on [...]

EN 69 TROUBLESHOOTING XP7210/3210EN-66-86 02.8.6, 8:28 PM 69[...]

70 EN Q&A There are several troubleshooting keys. If you are not sure how to operate your PC, your PC does not work well, or you suspect that your PC has been damaged, follow the relevant troubleshooting steps in the Q&A section. If the Q&A does not help you Contact us. If you cannot remove the trouble successfully , contact the JVC PC [...]

EN 71 Startup and Operation of W indows Q. The screen has hung. A. Use the following procedure to forcibly exit the applications running on your PC. Important When applications are forcibly terminated through this procedure, any unsaved unsaved data will be lost. T erminating an application forcibly 1. While holding down the [Ctrl] and [Alt] keys, [...]

72 EN Q. Starting the PC in the safe mode A. If some kind of trouble occurs on the PC, use the safe mode where the PC starts up with minimum functions. Use the following procedure to start up your PC in the safe mode. 1. T urn on the PC. 2. As soon as the JVC logo appears, hold down the [F8] key . Tip s If the [F8] key is pressed too late, W indows[...]

EN 73 Display Q. The PC is turned on but nothing appears on the screen. A. If the screen blacks out during operation, check the following. ¡ When the (Stand By) lamp is lit. • Move the stick or press any key on the keyboard to check if the power -saving function is working. • Check if the display is configured as an external display device. [W[...]

74 EN TROUBLESHOOTING Using the Internet Q. I cannot dial up. A. Check the connection. ¡ Check that the modem cable is connected. If you see the “ There was no dial tone. ” message, check the connection between the unit and the telephone line connector on the wall. Insert the modem fully until it is locked. ¡ When a divider is used Connect th[...]

EN 75 Q. The PC dials but connection is not established. A. Check the dialing setting. ¡ Check that the dialing type (tone or pulse) is correctly set for your telephone line. For checking and configuration procedures, see “ 3. Setting up the modem ” on page 32. ¡ When no connection operation occurs, check the destination setting. Use the foll[...]

76 EN Q. The PC makes a connection operation but connection is not established. A. Check the following. ¡ Check the user name and password. Refer to the material sent from your ISP for correct user name and password. ¡ The internal modem dials but negotiation is not made. The access point may have a problem. T ry to establish a connection later .[...]

EN 77 Battery Q. The battery is not charged. A. Check the following. ¡ When the built-in battery cannot be charged This PC is shipped with a short-circuiting pin on the standard lithium ion battery pack terminal. Be sure to remove the pin before use. For removal, see “ Mounting/Dismounting the Lithium Ion Battery Pack ” on page 14. ¡ When the[...]

78 EN TROUBLESHOOTING Miscellaneous Q. The PC is hot. A. The PC may become warm when used for a long time, but this is not a failure. Do not block the vents in the bottom or sides through which internal heat is removed. Q. The PC makes no sound. A. Check the following ¡ Check if the speaker is muted. T o use the volume control, press [Fn] and [F7][...]

EN 79 ¡ If you forget the BIOS password The following passwords can be set on the BIOS. • User password When this password is set, the user is requested to enter the password to start W indows or change a BIOS setting. • HDD password The password required for accessing the hard disk. Important • Y ou cannot delete the BIOS password even if y[...]

80 EN FRANGE & ANTWORTEN XP7210/3210EN-66-86 02.8.6, 8:28 PM 80[...]

EN 81 APPENDIX XP7210/3210EN-66-86 02.8.6, 8:28 PM 81[...]

82 EN List of Support Centres 1. Acrobat Reader http://www .adobe.com/support/readguide.html 2. Pixela ImageMixer http://www .imagemixer .com 3. Norton AntiV irus 2002 http://www .symantec.com/region/reg-eu/techsupp/index.html 4. Real Player http://www .service.real.com APPENDIX XP7210/3210EN-66-86 02.8.6, 8:28 PM 82[...]

EN 83 T rademark notice 1. i.LINK refers to IEEE1394-1995 and their expanded specifications. i.LINK and the i.LINK logo are trademarks of Sony Corporation, devised to make people more familiar with IEEE 1394. 2. Microsoft, W indows, W indows Media are trademarks or registered trademarks of Microsoft Corporation in the U.S. and other countries. The [...]

84 EN Specification Model Name MP-XP7210GB OS Windows XP Professional MP-XP3210GB CPU Model Mobile Intel Mobile Intel Pentium III processor-M P rocessor Celeron Clock speed 800MHz 650MHz Bus clock speed 133MHz 100MHz Secondary cache memory 512KB 256KB Main memory 256MB, standard (128MB on-board)/384MB, max. 128MB, standard (128MB on-board)/384MB, m[...]

EN 85 Options (separately available) Option name Model CD-ROM drive *1 MP-CDX1E Standard lithium ion battery pack *2 BN-LS1 1E Large-capacity lithium ion battery pack *3 BN-LL21E Battery charger *4 MP-BCX1E AC adapter *2 MP-ACX1GB External display cable MP-VGX1E *1 Connected with a PC card and powered from the InterLink unit. Maximum read speed is [...]

86 EN XP7210/3210EN-66-86 02.8.6, 8:28 PM 86[...]

EN 87 XP7210/3210EN-66-86 02.8.6, 8:28 PM 87[...]

88 EN XP7210/3210EN-66-86 02.8.6, 8:29 PM 88[...]

EN 89 XP7210/3210EN-66-86 02.8.6, 8:29 PM 89[...]

LET0207-002A INSTRUCTIONS Before Use Read and follow the instructions of this manual to use your Mobile mini note PC correctly. Always read the "Safety Precautions" and "Operation Notes." Keep this manual and the warranty card for further reference. Thank you for purchasing the JVC MP-XP7210GB/MP-XP3210GB Mobile mini note PC. 20[...]