Ir a la página of
manuales de instrucciones parecidos
-
Stereo Receiver
JVC LVT0142-006A
38 páginas 1.17 mb -
Stereo Receiver
JVC RX-430VBK
38 páginas 0.5 mb -
Stereo Receiver
JVC RX-D205S
88 páginas 2.52 mb -
Stereo Receiver
JVC RM-SR774XU
76 páginas 1.89 mb -
Stereo Receiver
JVC RX-7000RBK
60 páginas 1.44 mb -
Stereo Receiver
JVC RX-D411S/RX-D412B
60 páginas 2.53 mb -
Stereo Receiver
JVC RX-530RBK
42 páginas 0.56 mb -
Stereo Receiver
JVC RX-730RBK
58 páginas 0.89 mb
Buen manual de instrucciones
Las leyes obligan al vendedor a entregarle al comprador, junto con el producto, el manual de instrucciones JVC RX-D302B. La falta del manual o facilitar información incorrecta al consumidor constituyen una base de reclamación por no estar de acuerdo el producto con el contrato. Según la ley, está permitido adjuntar un manual de otra forma que no sea en papel, lo cual últimamente es bastante común y los fabricantes nos facilitan un manual gráfico, su versión electrónica JVC RX-D302B o vídeos de instrucciones para usuarios. La condición es que tenga una forma legible y entendible.
¿Qué es un manual de instrucciones?
El nombre proviene de la palabra latina “instructio”, es decir, ordenar. Por lo tanto, en un manual JVC RX-D302B se puede encontrar la descripción de las etapas de actuación. El propósito de un manual es enseñar, facilitar el encendido o el uso de un dispositivo o la realización de acciones concretas. Un manual de instrucciones también es una fuente de información acerca de un objeto o un servicio, es una pista.
Desafortunadamente pocos usuarios destinan su tiempo a leer manuales JVC RX-D302B, sin embargo, un buen manual nos permite, no solo conocer una cantidad de funcionalidades adicionales del dispositivo comprado, sino también evitar la mayoría de fallos.
Entonces, ¿qué debe contener el manual de instrucciones perfecto?
Sobre todo, un manual de instrucciones JVC RX-D302B debe contener:
- información acerca de las especificaciones técnicas del dispositivo JVC RX-D302B
- nombre de fabricante y año de fabricación del dispositivo JVC RX-D302B
- condiciones de uso, configuración y mantenimiento del dispositivo JVC RX-D302B
- marcas de seguridad y certificados que confirmen su concordancia con determinadas normativas
¿Por qué no leemos los manuales de instrucciones?
Normalmente es por la falta de tiempo y seguridad acerca de las funcionalidades determinadas de los dispositivos comprados. Desafortunadamente la conexión y el encendido de JVC RX-D302B no es suficiente. El manual de instrucciones siempre contiene una serie de indicaciones acerca de determinadas funcionalidades, normas de seguridad, consejos de mantenimiento (incluso qué productos usar), fallos eventuales de JVC RX-D302B y maneras de solucionar los problemas que puedan ocurrir durante su uso. Al final, en un manual se pueden encontrar los detalles de servicio técnico JVC en caso de que las soluciones propuestas no hayan funcionado. Actualmente gozan de éxito manuales de instrucciones en forma de animaciones interesantes o vídeo manuales que llegan al usuario mucho mejor que en forma de un folleto. Este tipo de manual ayuda a que el usuario vea el vídeo entero sin saltarse las especificaciones y las descripciones técnicas complicadas de JVC RX-D302B, como se suele hacer teniendo una versión en papel.
¿Por qué vale la pena leer los manuales de instrucciones?
Sobre todo es en ellos donde encontraremos las respuestas acerca de la construcción, las posibilidades del dispositivo JVC RX-D302B, el uso de determinados accesorios y una serie de informaciones que permiten aprovechar completamente sus funciones y comodidades.
Tras una compra exitosa de un equipo o un dispositivo, vale la pena dedicar un momento para familiarizarse con cada parte del manual JVC RX-D302B. Actualmente se preparan y traducen con dedicación, para que no solo sean comprensibles para los usuarios, sino que también cumplan su función básica de información y ayuda.
Índice de manuales de instrucciones
-
Página 1
LVT1321-001A [J] RX-D301S / RX-D302B A UDIO / VIDEO CONTR OL RECEIVER INSTR UCTIONS For Customer Use: Enter below the Model No. and Serial No. which are located either on the rear , bottom or side of the cabinet. Retain this information for future reference. Model No. Serial No. cover_RX-D301S[J]_f.p65 05.2.22, 16:44 3[...]
-
Página 2
W arnings, Cautions, and Others Mises en gar de , précautions et indications diver ses Caution–– STANDBY/ON button! Disconnect the mains plug to shut the power off completely. The STANDBY/ON button in any position does not disconnect the mains line. The power can be remote controlled. Attention—Touche STANDBY/ON! Déconnectez la fiche d’al[...]
-
Página 3
1 T able of Contents P ar ts identification ................................................ 2 Getting started ...................................................... 4 Before Installation .................................................................. 4 Checking the supplied accessories ....................................... 4 Putting batteries[...]
-
Página 4
2 Remote control See pages in parentheses for details . 1 TV/VIDEO button (36, 38) 2 Standby/on b uttons (14, 36 – 40) A UDIO , TV , DBS/CA TV , VCR , D VR/D VD 3 Source selecting buttons (14, 27, 36 – 40) TV , DBS, VCR, D VR/D VD , FM, AM, USB, D VD MUL TI 4 TV V OL (volume) +/– button (36, 38) 5 CHANNEL +/– button (36 – 40) 6 • Operat[...]
-
Página 5
3 Front panel 1 ST ANDBY/ON button and standby lamp (14) 2 CC CONVERTER b utton (16) 3 SETTING button (17, 19) 4 ADJUST button (23) 5 SURROUND b utton (33) 6 Source lamps D VD MUL TI, D VR/D VD , VCR, DBS , TV , USB, FM, AM 7 • SET button (17, 19, 23) • TUNER PRESET button (28) 8 • SOURCE SELECTOR (14, 28) • MUL TI JOG (17, 19, 23, 28, 33) [...]
-
Página 6
4 Putting batteries in the remote control Before using the remote control, put tw o supplied batter ies first. 1 Press and slide the battery cover on the bac k of the remote control. 2 Insert batteries. Make sure to match the polarity: (+) to (+) and (–) to (–). 3 Replace the cover . If the range or eff ectiveness of the remote control decrease[...]
-
Página 7
5 Snap the tabs on the loop into the slots of the base to assemble the AM loop antenna. Connecting the FM and AM antennas Do not connect the A C power plug to the wall outlet until all connections are completed. AM loop antenna (supplied) If AM reception is poor, connect an outdoor single vinyl-covered wire (not supplied). AM antenna connection Con[...]
-
Página 8
6 L R LS RS SBL C SW SBR (*SB) LEFT RIGHT LEFT RIGHT LEFT RIGHT SUBWOOFER OUT SURROUND SPEAKERS CAUTION:SPEAKER IMPEDANCE 6 - 16 SURROUND BACK SPEAKERS CENTER SPEAKER FRONT SPEAKERS Connecting the speakers Do not connect the A C power plug to the wall outlet until all connections are completed. Speaker Layout Diagram CA UTIONS: • Use speakers wit[...]
-
Página 9
7 ı Ή Ï Ì Ç Å DVR OUT(REC) DVR/DVD IN(PLAY) Y P B P R COMPONENT VIDEO MONITOR OUT DVR/DVD IN VCR(DBS) IN DVR OUT(REC) DVR/DVD IN(PLAY) FRONT This receiver is equipped with the f ollowing video terminals — composite video , S-video, and component video terminals. • If your video components ha ve S-video (Y/C-separation) and/or component[...]
-
Página 10
8 7 Connecting a D VD recorder or D VD play er with its analog discrete output jacks (D VD MUL TI IN): This connection is the best connection method f or enjoying D VD Audio sounds. When a D VD Audio disc is pla yed bac k, the or iginal high- quality sounds can be reproduced only using this connection. T urn off all components bef ore making connec[...]
-
Página 11
9 7 Connecting a VCR T urn off all components bef ore making connections. • When you connect other components , refer also to their manuals. Å T o component video output • Connect Y , P B , and P R correctly . ı T o left/right audio channel output Ç T o left/right audio channel input Î T o composite video output ‰ T o S-video output Ï T [...]
-
Página 12
10 7 Connecting a TV Connect the TV to the appropriate MONITOR OUT jac ks to view the pla yback picture from any other connected video components. Stereo audio cable (not supplied) Red Component video cable (not supplied) TV Composite video cable (not supplied) Green Blue Red S-video cable (not supplied) White Å T o component video input • Conne[...]
-
Página 13
11 DIGITAL OUT PCM/STREAM DIGITAL IN 2(DBS) 1(DVR/ DVD) 3(VCR) NO TES • When shipped from the f actor y , the DIGIT AL IN terminals have been set for use with the f ollowing components: – 1(D VR/D VD): F or D VD recorder or D VD play er – 2(DBS): F or DBS tuner – 3(VCR): F or VCR If you connect other components , change the digital input (D[...]
-
Página 14
12 4. T urn on the receiver , then slide the USB WIRELESS switch on the rear to “ID LEARNING, ” and select the source as “USB WIRELESS. ” When you slide the s witch, the lamp in the switch starts flashing. 5. Set the volume to minim um. IMPORT ANT : Alwa ys set volume to “0” when connecting or disconnecting the other equipment. 6. Press[...]
-
Página 15
13 Now PC is read y for playback thr ough the USB connection. After installation is completed, you can use y our PC as the playbac k source. The PC automatically recognizes the receiv er whenev er the transmitter is connected to the PC or the USB cable is connected between the PC and the receiv er while the receiver is turned on. • When not using[...]
-
Página 16
14 Basic operations 2 Select the source to play On the front panel: T urn SOURCE SELECTOR until the sour ce name y ou want appears on the display . The source lamp corresponding to the selected source lights in red. • As you turn SOURCE SELECTOR, the source changes as follo ws: D VD MUL TI: Select the D VD player using the analog discrete output [...]
-
Página 17
15 Selecting the digital decode mode If the f ollowing symptoms occur while playing Dolb y Digital or DTS software with “DGTL A UTO” selected (see page 14), follo w the procedure below: • Sound does not come out at the beginning of pla yback. • Noise comes out while searching f or or skipping chapters or trac ks. From the remote control ONL[...]
-
Página 18
16 Basic adjustment of auto memory This receiv er memor izes sound settings f or each source: • when you turn off the power , and • when you change the source . When you change the source , the memor ized settings f or the newly selected source are automatically recalled. The follo wing can be stored for each source: • Analog/digital input mo[...]
-
Página 19
17 T o obtain the best possible sound eff ect from Surround/DSP modes (see pages 29 to 33), you need to set up the speak er and subwoof er information after all the connections are completed. F rom pages 17 to 22, how to set speakers and other basic items of the receiv er are explained. Setting the speaker information easily — Quick Speaker Setup[...]
-
Página 20
18 Speakers (channels) number and the size Y ou can find how each of the speak er size is defined according to the number of connected speakers (speak er channel “ ch ” number) you select. • Subwoof er is counted as 0.1 channel. The size of connected speak ers CH L/R C LS/RS SB SUBWFR 2.0CH LARGE NONE NONE NONE NO 2.1CH SMALL NONE NONE NONE Y[...]
-
Página 21
19 Operating procedure On the front panel ONL Y : Before y ou star t, remember ... There is a time limit in doing the f ollowing steps. If the setting is canceled before y ou finish, star t from step 1 again. Ex.: When setting DIGIT AL IN 1 terminal. 1 Press SETTING. MUL TI JOG now works for the setting operation. 2 T urn MUL TI JOG until the item [...]
-
Página 22
20 In this case, set the distance as f ollows: Left front speaker (L): “FRONT L <3.0m> (10ft)” Right front speaker (R): “FRONT R <3.0m> (10ft)” Center speaker (C): “CENTER <3.0m> (10ft)” Left surround speaker (LS): “SURR L <2.7m> (9ft)” Right surround speaker (RS): “SURR R <2.7m> (9ft)” Left surroun[...]
-
Página 23
21 Selecting the main or sub channel — DUAL MONO Y ou can select the playbac k sound (channel) you want while playing digital softw are recorded (or broadcasted) in Dual Mono mode (see page 30), which includes two monaural channels separately . When the receiver detects Dual mono signals , the DU AL MONO indicator lights up on the display . D MON[...]
-
Página 24
22 Setting the digital input (DIGIT AL IN) terminals—DIGIT AL IN 1/2/3 When you use the digital input terminals, register what components are connected to which terminals—DIGIT AL IN 1/2/3 (see page 11) so that the correct source name will appear when you select the digital source. Select one of the follo wing components for each terminal: D VR[...]
-
Página 25
23 Sound adjustments Y ou can make sound adjustment to y our preference after completing basic setting. Basic adjustment items Y ou can adjust the follo wing items. See pages in parentheses f or details. • Y ou cannot select the items which is not av ailable with the current setting. Items T o do SUBWFR L VL* 1 Adjust the subwoof er output level.[...]
-
Página 26
24 Adjusting the equalization patterns — D EQ 63Hz/250Hz/1kHz/4kHz/16kHz Y ou can adjust equalization patterns in five frequency bands (center frequency: 63 Hz, 250 Hz, 1 kHz, 4 kHz, 16 kHz) for the front speakers . • Once you hav e made an adjustment, it is memorized for each source. Adjustable range: – 8 (dB) to +8 (dB) (in 2 dB inter vals)[...]
-
Página 27
25 Adjusting the bass sounds Reinforcing the bass — BASS BOOST Y ou can boost the bass lev el — Bass Boost. • Once you hav e made an adjustment, it is memorized for each source. B BOOST < ON > Select to boost the bass lev el. The B.BOOST indicator lights up on the displa y . B BOOST < OFF > Select to deactivate the Bass Boost. Ini[...]
-
Página 28
26 Adjusting the center channel localization for Pro Logic IIx Music and Pro Logic II Music — CENTER WIDTH This setting is av ailable when Pro Logic IIx Music or Pro Logic II Music is activated f or the analog or digital 2-channel sound signal. T o activate Pro Logic IIx Music or Pro Logic II Music, see page 33. • If “ CENTER SPK ” is set t[...]
-
Página 29
27 T uner operations T uning in to stations manually From the remote control ONL Y : 1 Press FM or AM to select the band. The last receiv ed station of the selected band is tuned in. 2 Press repeatedly or hold TUNING 9 or ( TUNING until the station y ou want is tuned in. • Pressing (or holding) TUNING 9 increases the frequency . • Pressing (or [...]
-
Página 30
28 3 Press the numeric b uttons (1 – 10, +10) to select a channel number while the c hannel number position is flashing. • For channel n umber 5, press 5. • For channel n umber 15, press +10, then 5. • For channel n umber 30, press +10, +10, then 10. 4 Press MEMOR Y again while the selected channel number is flashing on the displa y . The s[...]
-
Página 31
29 Creating realistic sound fields Reproducing theater ambience In a movie theater , many speakers are located on the walls to reproduce impressiv e multi-channel sound, reaching you from all directions. With these many speakers , sound localization and sound mov ement can be expressed. Surround/DSP modes built in this receiv er can create almost t[...]
-
Página 32
30 DTS Neo:6 DTS Neo:6 is another conv ersion method to create 6-channel (plus subwoof er) from analog/digital 2-channel software by using the high precision digital matrix decoder used for DTS-ES Matrix 6.1ch. • This receiver pro vides the following DTS Neo:6 modes — Neo:6 Cinema (NEO:6 CINEMA) and Neo:6 Music (NEO:6 MUSIC). When one of them i[...]
-
Página 33
31 Introducing the DSP modes The sound heard in a concer t hall, club , etc. consists of direct sound and indirect sound — early reflections and reflections from behind. Direct sounds reach the listener directly without any reflection. On the other hand, indirect sounds are dela yed by the distances of the ceiling and walls. These direct sounds a[...]
-
Página 34
32 Using the Surround/DSP modes A vailable Surround/DSP modes v ar y depending on the speaker settings and the incoming signals . See the table below . • The numbers inside the parentheses follo wing the incoming signal type indicate the number of the front channels and that of the surround channels. For e xample, (3/2) indicates that the signals[...]
-
Página 35
33 On the front panel: Before y ou star t, remember ... There is a time limit in doing the f ollowing steps. If the setting is canceled before y ou finish, star t from step 2 again. 1 Select and play an y source other than D VD MUL TI. • Make sure you ha ve selected the input mode (analog or digital) correctly . 2 Press SURROUND . MUL TI JOG now [...]
-
Página 36
34 AV COMPU LINK EX AV COMPU LINK- III AV COMPU LINK AV COMPU LINK AV COMPU LINK- III A V COMPU LINK remote contr ol system The A V COMPU LINK remote control system allows y ou to operate JVC ’ s video components (TV , D VD play er*, and VCR) through this receiver . This receiver is equipped with the A V COMPU LINK- III , which has added a functi[...]
-
Página 37
35 One-touch DVD play Simply by starting playbac k on the D VD play er, y ou can enjoy the D VD playback without setting other s witches manually . • When the D VD player is connected through the analog input jacks on this receiv er (and analog input is selected), the receiver automatically turns on and changes the source to “ D VR/D VD ” or [...]
-
Página 38
36 Y ou can use the supplied remote control to operate not onl y this receiver but also other JVC pr oducts. • Refer also to the man uals supplied with the other products. – Some JVC VCRs can accept two types of the control signals — remote codes “ A ” and “ B. ” This remote control can operate a VCR whose remote control code is set t[...]
-
Página 39
37 123 456 789 10 0 10 Y ou can alwa ys perform the follo wing operation: D VD/DVR : T ur n on or off the D VD recorder or D VD play er . After pressing D VR/D VD , you can perf or m the follo wing operations on the D VD recorder and D VD play er. 3 : Star t playbac k. 7 : Stop pla yback. 8 : P ause playbac k. T o release it, press 3 . ¢ : Skip to[...]
-
Página 40
38 By changing the transmittable signals, you can use the supplied remote control to operate other man ufacturers ’ products. • Refer also to the man uals supplied with the other products. • T o operate those components with the remote control, first you need to set the manuf acturers ’ codes each for the TV , VCR, CA TV converter , DBS tun[...]
-
Página 41
39 ❏ Changing the transmittable signals for operating a VCR 1 Press and hold VCR . 2 Press VCR. 3 Enter the manufacturer ’ s code using buttons 1 – 9, and 0. See “ Manufacturers ’ codes for VCR ” on the r ight. 4 Release VCR . Now , you can perform the f ollowing operation on the VCR. VCR : T ur n on or off the VCR. After pressing VCR, [...]
-
Página 42
40 Manufacturer Codes G.I. 01 Gemini 02 Hamlin 03, 04, 05, 06 Jerrold 07, 08, 09, 10, 11, 12, 13, 14, 15 Macom 16, 17, 18 Magnavox 19 Oak 20, 21, 22 Panasonic 23, 24 Philips 25, 26, 27, 28, 29, 30 Pioneer 31, 32 S. Atlanta 33, 34, 35 Samsung 36 Tocom 37 Zenith 38, 39 Manufacturer Codes JVC 01 Hitachi 02 Kenwood 03, 04 Magnavox 05 Marantz 06 Mitsubi[...]
-
Página 43
41 T r oubleshooting Use this chart to help you solve daily operational prob lems. If there are any prob lems you cannot solv e, contact your JVC ’ s service center. PROBLEM The power does not come on. The receiv er tur ns off (enters standby mode). “ O VER HEA T ” flashes on the displa y , then the receiv er tur ns off. No sound from speaker[...]
-
Página 44
42 Designs and specifications are subject to change without notice. Amplifier Output Power At stereo operation: F ront channels: 110 W per channel, min. RMS, driven into 6 Ω at 40 Hz to 20 kHz with no more than 0.8% total harmonic distortion. At surround operation: F ront channels: 110 W per channel, min. RMS, driven into 6 Ω at 1 kHz with no m[...]
-
Página 45
warranty.p65 05.2.22, 16:45 1[...]
-
Página 46
warranty.p65 05.2.22, 16:45 2[...]
-
Página 47
0205RYMMDWJEIN EN © 2005 Victor Company of Japan, Limited AUDIO / VIDEO CONTROL RECEIVER RX-D301S / RX-D302B cover_RX-D301S[J]_f.p65 05.2.22, 16:44 2[...]
-
Página 48
English Français LVT1321-002A [C] RX-D302B A UDIO / VIDEO CONTR OL RECEIVER RECEPTURE DE COMMANDE A UDIO/VIDEO INSTR UCTIONS MANUEL D ’ INSTR UCTIONS cover_RX-D301S[C]_f.p65 05.2.23, 16:24 3[...]
-
Página 49
W arnings, Cautions, and Others Mises en gar de , précautions et indications diver ses Caution–– STANDBY/ON button! Disconnect the mains plug to shut the power off completely. The STANDBY/ON button in any position does not disconnect the mains line. The power can be remote controlled. Attention—Touche STANDBY/ON! Déconnectez la fiche d’al[...]
-
Página 50
1 English T able of Contents P ar ts identification ................................................ 2 Getting started ...................................................... 4 Before Installation .................................................................. 4 Checking the supplied accessories ....................................... 4 Putting b[...]
-
Página 51
2 English Remote control See pages in parentheses for details . 1 TV/VIDEO button (36, 38) 2 Standby/on b uttons (14, 36 – 40) A UDIO , TV , DBS/CA TV , VCR , D VR/D VD 3 Source selecting buttons (14, 27, 36 – 40) TV , DBS, VCR, D VR/D VD , FM, AM, USB, D VD MUL TI 4 TV V OL (volume) +/ – button (36, 38) 5 CHANNEL +/ – button (36 – 40) 6 [...]
-
Página 52
3 English Front panel 1 ST ANDBY/ON button and standby lamp (14) 2 CC CONVERTER b utton (16) 3 SETTING button (17, 19) 4 ADJUST button (23) 5 SURROUND b utton (33) 6 Source lamps D VD MUL TI, D VR/D VD , VCR, DBS , TV , USB, FM, AM 7 • SET button (17, 19, 23) • TUNER PRESET button (28) 8 • SOURCE SELECTOR (14, 28) • MUL TI JOG (17, 19, 23, [...]
-
Página 53
4 English Putting batteries in the remote control Before using the remote control, put tw o supplied batter ies first. 1 Press and slide the battery cover on the bac k of the remote control. 2 Insert batteries. Make sure to match the polarity: (+) to (+) and (–) to (–). 3 Replace the cover . If the range or eff ectiveness of the remote control [...]
-
Página 54
5 English Snap the tabs on the loop into the slots of the base to assemble the AM loop antenna. Connecting the FM and AM antennas Do not connect the A C power plug to the wall outlet until all connections are completed. AM loop antenna (supplied) If AM reception is poor, connect an outdoor single vinyl-covered wire (not supplied). AM antenna connec[...]
-
Página 55
6 English L R LS RS SBL C SW SBR (*SB) LEFT RIGHT LEFT RIGHT LEFT RIGHT SUBWOOFER OUT SURROUND SPEAKERS CAUTION:SPEAKER IMPEDANCE 6 - 16 SURROUND BACK SPEAKERS CENTER SPEAKER FRONT SPEAKERS Connecting the speakers Do not connect the A C power plug to the wall outlet until all connections are completed. Speaker Layout Diagram CA UTIONS: • Use spea[...]
-
Página 56
7 English ı Ή Ï Ì Ç Å DVR OUT(REC) DVR/DVD IN(PLAY) Y P B P R COMPONENT VIDEO MONITOR OUT DVR/DVD IN VCR(DBS) IN DVR OUT(REC) DVR/DVD IN(PLAY) FRONT This receiver is equipped with the f ollowing video terminals— composite video , S-video, and component video terminals. • If your video components ha ve S-video (Y/C-separation) and/or co[...]
-
Página 57
8 English 7 Connecting a D VD recorder or D VD play er with its analog discrete output jacks (D VD MUL TI IN): This connection is the best connection method f or enjoying D VD Audio sounds. When a D VD Audio disc is pla yed bac k, the or iginal high- quality sounds can be reproduced only using this connection. T urn off all components bef ore makin[...]
-
Página 58
9 English 7 Connecting a VCR T urn off all components bef ore making connections. • When you connect other components , refer also to their manuals. Å T o component video output • Connect Y , P B , and P R correctly . ı T o left/right audio channel output Ç T o left/right audio channel input Î T o composite video output ‰ T o S-video outp[...]
-
Página 59
10 English 7 Connecting a TV Connect the TV to the appropriate MONITOR OUT jac ks to view the pla yback picture from any other connected video components. Stereo audio cable (not supplied) Red Component video cable (not supplied) TV Composite video cable (not supplied) Green Blue Red S-video cable (not supplied) White Å T o component video input ?[...]
-
Página 60
11 English DIGITAL OUT PCM/STREAM DIGITAL IN 2(DBS) 1(DVR/ DVD) 3(VCR) NO TES • When shipped from the f actor y , the DIGIT AL IN terminals have been set for use with the f ollowing components: – 1(D VR/D VD): F or D VD recorder or D VD play er – 2(DBS): F or DBS tuner – 3(VCR): F or VCR If you connect other components , change the digital [...]
-
Página 61
12 English 4. T urn on the receiver , then slide the USB WIRELESS switch on the rear to “ID LEARNING, ” and select the source as “USB WIRELESS. ” When you slide the s witch, the lamp in the switch starts flashing. 5. Set the volume to minim um. IMPORT ANT: Alwa ys set volume to “0” when connecting or disconnecting the other equipment. 6[...]
-
Página 62
13 English Now PC is read y for playback thr ough the USB connection. After installation is completed, you can use y our PC as the playbac k source. The PC automatically recognizes the receiv er whenev er the transmitter is connected to the PC or the USB cable is connected between the PC and the receiv er while the receiver is turned on. • When n[...]
-
Página 63
14 English Basic operations 2 Select the source to play On the front panel: T urn SOURCE SELECTOR until the sour ce name y ou want appears on the display . The source lamp corresponding to the selected source lights in red. • As you turn SOURCE SELECTOR, the source changes as follo ws: D VD MUL TI: Select the D VD player using the analog discrete[...]
-
Página 64
15 English Selecting the digital decode mode If the f ollowing symptoms occur while playing Dolb y Digital or DTS software with “DGTL A UTO” selected (see page 14), follo w the procedure below: • Sound does not come out at the beginning of pla yback. • Noise comes out while searching f or or skipping chapters or trac ks. From the remote con[...]
-
Página 65
16 English Basic adjustment of auto memory This receiv er memor izes sound settings f or each source: • when you turn off the power , and • when you change the source . When you change the source , the memor ized settings f or the newly selected source are automatically recalled. The follo wing can be stored for each source: • Analog/digital [...]
-
Página 66
17 English T o obtain the best possible sound eff ect from Surround/DSP modes (see pages 29 to 33), you need to set up the speak er and subwoof er information after all the connections are completed. F rom pages 17 to 22, how to set speakers and other basic items of the receiv er are explained. Setting the speaker information easily — Quick Speak[...]
-
Página 67
18 English Speakers (channels) number and the size Y ou can find how each of the speak er size is defined according to the number of connected speakers (speak er channel “ ch ” number) you select. • Subwoof er is counted as 0.1 channel. The size of connected speak ers CH L/R C LS/RS SB SUBWFR 2.0CH LARGE NONE NONE NONE NO 2.1CH SMALL NONE NON[...]
-
Página 68
19 English Operating procedure On the front panel ONL Y : Before y ou star t, remember ... There is a time limit in doing the f ollowing steps. If the setting is canceled before y ou finish, star t from step 1 again. Ex.: When setting DIGIT AL IN 1 terminal. 1 Press SETTING. MUL TI JOG now works for the setting operation. 2 T urn MUL TI JOG until t[...]
-
Página 69
20 English In this case, set the distance as f ollows: Left front speaker (L): “ FRONT L <3.0m> (10ft) ” Right front speaker (R): “ FR ONT R <3.0m> (10ft) ” Center speaker (C): “ CENTER <3.0m> (10ft) ” Left surround speaker (LS): “ SURR L <2.7m> (9ft) ” Right surround speaker (RS): “ SURR R <2.7m> (9f[...]
-
Página 70
21 English Selecting the main or sub channel — DUAL MONO Y ou can select the playbac k sound (channel) you want while playing digital softw are recorded (or broadcasted) in Dual Mono mode (see page 30), which includes two monaural channels separately . When the receiver detects Dual mono signals , the DU AL MONO indicator lights up on the display[...]
-
Página 71
22 English Setting the digital input (DIGIT AL IN) terminals—DIGIT AL IN 1/2/3 When you use the digital input terminals, register what components are connected to which terminals—DIGIT AL IN 1/2/3 (see page 11) so that the correct source name will appear when you select the digital source. Select one of the follo wing components for each termin[...]
-
Página 72
23 English Sound adjustments Y ou can make sound adjustment to y our preference after completing basic setting. Basic adjustment items Y ou can adjust the follo wing items. See pages in parentheses f or details. • Y ou cannot select the items which is not av ailable with the current setting. Items T o do SUBWFR L VL* 1 Adjust the subwoof er outpu[...]
-
Página 73
24 English Adjusting the equalization patterns — D EQ 63Hz/250Hz/1kHz/4kHz/16kHz Y ou can adjust equalization patterns in five frequency bands (center frequency: 63 Hz, 250 Hz, 1 kHz, 4 kHz, 16 kHz) for the front speakers . • Once you hav e made an adjustment, it is memorized for each source. Adjustable range: – 8 (dB) to +8 (dB) (in 2 dB int[...]
-
Página 74
25 English Adjusting the bass sounds Reinforcing the bass — BASS BOOST Y ou can boost the bass lev el — Bass Boost. • Once you hav e made an adjustment, it is memorized for each source. B BOOST < ON > Select to boost the bass lev el. The B.BOOST indicator lights up on the displa y . B BOOST < OFF > Select to deactivate the Bass Bo[...]
-
Página 75
26 English Adjusting the center channel localization for Pro Logic IIx Music and Pro Logic II Music — CENTER WIDTH This setting is av ailable when Pro Logic IIx Music or Pro Logic II Music is activated f or the analog or digital 2-channel sound signal. T o activate Pro Logic IIx Music or Pro Logic II Music, see page 33. • If “ CENTER SPK ” [...]
-
Página 76
27 English T uner operations T uning in to stations manually From the remote control ONL Y : 1 Press FM or AM to select the band. The last receiv ed station of the selected band is tuned in. 2 Press repeatedly or hold TUNING 9 or ( TUNING until the station y ou want is tuned in. • Pressing (or holding) TUNING 9 increases the frequency . • Press[...]
-
Página 77
28 English 3 Press the numeric b uttons (1 – 10, +10) to select a channel number while the c hannel number position is flashing. • For channel n umber 5, press 5. • For channel n umber 15, press +10, then 5. • For channel n umber 30, press +10, +10, then 10. 4 Press MEMOR Y again while the selected channel number is flashing on the displa y[...]
-
Página 78
29 English Creating realistic sound fields Reproducing theater ambience In a movie theater , many speakers are located on the walls to reproduce impressiv e multi-channel sound, reaching you from all directions. With these many speakers , sound localization and sound mov ement can be expressed. Surround/DSP modes built in this receiv er can create [...]
-
Página 79
30 English DTS Neo:6 DTS Neo:6 is another conv ersion method to create 6-channel (plus subwoof er) from analog/digital 2-channel software by using the high precision digital matrix decoder used for DTS-ES Matrix 6.1ch. • This receiver pro vides the following DTS Neo:6 modes — Neo:6 Cinema (NEO:6 CINEMA) and Neo:6 Music (NEO:6 MUSIC). When one o[...]
-
Página 80
31 English Introducing the DSP modes The sound heard in a concer t hall, club , etc. consists of direct sound and indirect sound — early reflections and reflections from behind. Direct sounds reach the listener directly without any reflection. On the other hand, indirect sounds are dela yed by the distances of the ceiling and walls. These direct [...]
-
Página 81
32 English Using the Surround/DSP modes A vailable Surround/DSP modes v ar y depending on the speaker settings and the incoming signals . See the table below . • The numbers inside the parentheses follo wing the incoming signal type indicate the number of the front channels and that of the surround channels. For e xample, (3/2) indicates that the[...]
-
Página 82
33 English On the front panel: Before y ou star t, remember ... There is a time limit in doing the f ollowing steps. If the setting is canceled before y ou finish, star t from step 2 again. 1 Select and play an y source other than D VD MUL TI. • Make sure you ha ve selected the input mode (analog or digital) correctly . 2 Press SURROUND . MUL TI [...]
-
Página 83
34 English AV COMPU LINK EX AV COMPU LINK- III AV COMPU LINK AV COMPU LINK AV COMPU LINK- III A V COMPU LINK remote contr ol system The A V COMPU LINK remote control system allows y ou to operate JVC’ s video components (TV , D VD play er*, and VCR) through this receiver . This receiver is equipped with the A V COMPU LINK- III , which has added a[...]
-
Página 84
35 English One-touch DVD play Simply by starting playbac k on the D VD play er, y ou can enjoy the D VD playback without setting other s witches manually . • When the D VD player is connected through the analog input jacks on this receiv er (and analog input is selected), the receiver automatically turns on and changes the source to “ D VR/D VD[...]
-
Página 85
36 English Y ou can use the supplied remote control to operate not onl y this receiver but also other JVC pr oducts. • Refer also to the man uals supplied with the other products. – Some JVC VCRs can accept two types of the control signals — remote codes “ A ” and “ B. ” This remote control can operate a VCR whose remote control code [...]
-
Página 86
37 English 123 456 789 10 0 10 Y ou can alwa ys perform the follo wing operation: D VD/DVR : T ur n on or off the D VD recorder or D VD play er . After pressing D VR/D VD , you can perf or m the follo wing operations on the D VD recorder and D VD play er. 3 : Star t playbac k. 7 : Stop pla yback. 8 : P ause playbac k. T o release it, press 3 . ¢ :[...]
-
Página 87
38 English By changing the transmittable signals, you can use the supplied remote control to operate other man ufacturers ’ products. • Refer also to the man uals supplied with the other products. • T o operate those components with the remote control, first you need to set the manuf acturers ’ codes each for the TV , VCR, CA TV converter ,[...]
-
Página 88
39 English ❏ Changing the transmittable signals for operating a VCR 1 Press and hold VCR . 2 Press VCR. 3 Enter the manufacturer ’ s code using buttons 1 – 9, and 0. See “ Manufacturers ’ codes for VCR ” on the r ight. 4 Release VCR . Now , you can perform the f ollowing operation on the VCR. VCR : T ur n on or off the VCR. After pressi[...]
-
Página 89
40 English Manufacturer Codes G.I. 01 Gemini 02 Hamlin 03, 04, 05, 06 Jerrold 07, 08, 09, 10, 11, 12, 13, 14, 15 Macom 16, 17, 18 Magnavox 19 Oak 20, 21, 22 Panasonic 23, 24 Philips 25, 26, 27, 28, 29, 30 Pioneer 31, 32 S. Atlanta 33, 34, 35 Samsung 36 Tocom 37 Zenith 38, 39 Manufacturer Codes JVC 01 Hitachi 02 Kenwood 03, 04 Magnavox 05 Marantz 06[...]
-
Página 90
41 English T r oubleshooting Use this chart to help you solve daily operational prob lems. If there are any prob lems you cannot solv e, contact your JVC ’ s service center. PROBLEM The power does not come on. The receiv er tur ns off (enters standby mode). “ O VER HEA T ” flashes on the displa y , then the receiv er tur ns off. No sound from[...]
-
Página 91
42 English Designs and specifications are subject to change without notice. Amplifier Output Power At stereo operation: F ront channels: 110 W per channel, min. RMS, driven into 6 Ω at 40 Hz to 20 kHz with no more than 0.8% total harmonic distortion. At surround operation: F ront channels: 110 W per channel, min. RMS, driven into 6 Ω at 1 kHz w[...]
-
Página 92
0305RYMMDWJEIN EN, FR © 2005 Victor Company of Japan, Limited AUDIO / VIDEO CONTROL RECEIVER RX-D302B cover_RX-D301S[C]_f.p65 05.2.23, 16:24 2[...]