Kenwood KRF-V8010D manual

Operations Preparation Remote Control Other AUDIO VIDEO SURROUND RECEIVER KRF-V8010D INSTRUCTION MANUAL KENWOOD CORPORA TION B60-4057-00 00 MA (T, X, Q) AP 99/12 11 10 9 8 7 6 5 4 3 2 1 98/12 11 10 9 8 7 About the supplied remote control . . . Compared to standard remote controls, the remote control supplied with this receiver has several operation[...]

2 KRF-V8010D (En/T) Preparations Units are designed for operation as follows. U.K. and Europe ............................................... AC 230 V only Australia ........................................................... AC 240 V only Russia ............................................................... AC 220 V only W ARNING : TO PREVENT FIR[...]

3 KRF-V8010D (En/T) Operations Preparations Other Remote Control Getting started .................................. 2 Before applying the power ................................ 2 Safety precautions ............................................. 2 Unpacking ......................................................... 2 How to use this manual ...........[...]

4 KRF-V8010D (En/T) Preparations Special features True home theater sound This receiver incorporates a wide variety of surround modes to bring you maximum enjoyment from your video software. Select a surround mode according to your equipment or the software you are going to play and enjoy! £ Dolby Digital (AC-3) The DOLBY DIGITAL (AC-3) mode lets [...]

5 KRF-V8010D (En/T) Preparation * ** ** ** * ; FM AM kHz MHz 3 STEREO B S.DIRECT A SP TI.VOL MUTE RDS EON PTY TP TA NEWS DOWNMIX MONITOR PRO LOGIC TUNED MEMO. AUTO ST. S SW C R S R LS L DIGITAL 1 2 ! 6 5 4 3 9 0 7 8 @ ¢ £ * & ^ # AUTO SOUND Z$ % A SPEAKERS B BASS BOOST MONITOR SOURCE DIRECT MULTI CONTROL INPUT SELECTOR VOLUME CONTROL DO[...]

6 KRF-V8010D (En/T) Preparations 8 FUNCTION SHIFT key RC $ Use in combination with the numeric keys to execute alternate commands. 9 Numeric keys RC $ Provide functions identical to those of the original remote control supplied with the component you are controlling. To access the functions printed above the keys, press within 3 seconds of pressing[...]

7 Preparations KRF-V8010D (En/T) AC 220 - 240V AC 110 - 120V AC 220 - 240V AC 110 - 120V REC OUT PHONO CD MD / TAPE MONITOR PLAY IN REC OUT PLAY IN L R Make connections as shown below. When connecting the related system components, be sure to also refer to the instruction manuals supplied with the components you are connecting. Do not connect the p[...]

8 Preparations KRF-V8010D (En/T) VIDEO 1 VIDEO 1 VIDEO 2 VIDEO 3 VIDEO 1 VIDEO 2/ DVD 6CH. VIDEO 3/ DVD 6CH. REC OUT PLAY IN PLAY IN PLAY IN MONITOR VIDEO IN VIDEO OUT Connecting video components OUT OUT IN Video Inputs (Yellow RCA pin cord) Video inputs and outputs (Yellow RCA pin cords) OUT Setting up the system Video deck The digital in jacks ca[...]

9 Preparations KRF-V8010D (En/T) Input mode settings The VIDEO2 and VIDEO3 inputs each include jacks for digital audio input and analog audio input. You must select beforehand which type of input is to be used for each connected component. The initial factory setting is to use the digital audio signal for playback. To use the analog audio input for[...]

10 Preparations KRF-V8010D (En/T) Connecting the antennas Antenna terminal connections 1 Push lever. 2 Insert cord. AM loop antenna The supplied loop antenna is for use indoors. Place it as far as possible from the receiver, TV set, speaker cords and power cord, and adjust the direction for best reception. FM indoor antenna The supplied indoor ante[...]

11 Preparations KRF-V8010D (En/T) Connecting the system control Connecting system control cords after connecting a KENWOOD audio component system lets you take advantage of convenient system control operations. There are two KENWOOD system control modes. Make connec- tions according to the groups of terminal symbols shown below. ƒ Mode : lets you [...]

12 Preparations KRF-V8010D (En/T) SUBWOOFER SURROUND PRE OUT CENTER L R CENTER SPEAKER FRONT SPEAKERS + + - - R A L C SURROUND SPEAKERS FRONT SPEAKERS L R + + -- + + -- L R B 1 Strip coating. 2 Loosen. 3 Insert. 4 Secure. Connecting the speakers Right Front Speakers A Left Right Use the FRONT SPEAKERS B terminals if you want to connect a second fro[...]

13 Preparations KRF-V8010D (En/T) Speaker placement Subwoofer Front speakers : Place to the front left and right of the listening position. Front speakers are required for all surround modes. Center speaker : Place front and center. This speaker stabilizes the sound image and helps recreate sound motion. Be sure to connect a center speaker when usi[...]

14 Preparations KRF-V8010D (En/T) Preparing for surround sound Speaker settings 7 Press the SETUP key to accept the setting. Turn on the receiver. % Select a speaker system. 1 2 3 4 1 Press the SETUP key to make the subwoofer setting indica- tion (SUBW) appear. 2 Use the MULTI CONTROL (TUNING/SKIP) to select the appro- priate subwoofer setting. 1 S[...]

15 Preparations KRF-V8010D (En/T) Preparing for surround sound Input level adjustment (analog sources only) If the input level of an analog source signal is too high or the receiver’s CLIP INDICATOR lights, adjust the input level. 1 Use the INPUT SELECTOR knob to select the source whose input level you want to adjust. • You can store a separate[...]

16 Operations KRF-V8010D (En/T) Normal playback 1 Listening to a source component 2 3 Start playback from the selected source. * Once setup codes are registered in the remote control, the input name display changes according to the name of the registered component. Example: if you register a VCR at the VIDEO 1 jacks, " VCR " appears inste[...]

17 Operations KRF-V8010D (En/T) To adjust the balance Muting the sound MUTE lets you mute the sound of the speakers. Press the MUTE key. To cancel Press the MUTE key again so that the “MUTE” indicator goes off. • Muting can also be cancelled by adjusting the volume. Blinks Use the test tone feature. $ - 3 SOURCE DIRECT playback (analog source[...]

18 Operations KRF-V8010D (En/T) Listening to radio broadcasts 1 2 3 Each press switches the tuning method as follows: 4 Auto tuning : The next station is tuned automatically. Manual tuning : Turn the knob (press the key) to select the desired station. Each press switches the band as follows: 1 AUTO lit (auto tuning) 2 AUTO not lit (manual tuning) T[...]

19 Operations KRF-V8010D (En/T) Each press switches the display mode as follows: 1 PS (Program Service name) display 2 RT (Radio Text) display 3 Frequency display Using the DISPLA Y key 1 PS (Program Service name) display: The station name is displayed automatically when an RDS broad- cast is received. If no PS data was sent, “ NO PS ” is displ[...]

20 Operations KRF-V8010D (En/T) Receiving preset stations in order (P.CALL) • Each time you press the key, another preset station is received in order. Pressing the P.CALL key ( ¢ ) does the following: 01 = 02 = 03 = ...... 28 = 29 = 30 = 01 = 02 = 03 = Pressing the P.CALL key ( 4 ) does the following: 01 + 02 + 03 + ...... 28 + 29 + 30 + 01 + 0[...]

21 Operations KRF-V8010D (En/T) 3 Press the PTY key to start searching. EXAMPLE: Searching for a Rock Music broadcast. Goes out Station name display Blinks Program type name display To select another program type Display while searching Display when a station is received. • No sound is heard while “ PTY ” is blinking. • If the desired progr[...]

22 Operations KRF-V8010D (En/T) 1 Hold down the TA/NEWS key for more than two seconds so that the “TI.VOL” indicator starts blinking. 2 Use the VOLUME CONTROL knob to select the desired volume level. Proceed to next step within five seconds. 3 Press the TA/NEWS key to enter the new setting. • The “ TI.VOL ” indicator stops blinking and re[...]

23 Operations KRF-V8010D (En/T) Dolby Digital (AC-3) The Dolby Digital (AC-3) surround format lets you enjoy up to 5.1 channels of digital surround sound from Dolby Digital (AC-3) pro- gram sources (such as Laserdisc or DVD software marked ). Compared with previous Dolby surround, Dolby Digital (AC-3) pro- vides even better sound quality, greater s[...]

24 Operations KRF-V8010D (En/T) V IDEO   3  A SP TUNED MEMO. AUTO ST. AUTO SOUND C RS R LS L LFE DIGITAL B Surround Play DOLBY DIGITAL can be used when playing DVD or LD software bearing the mark and DOLBY DIGITAL (AC-3) format digital broadcasts (etc.). DOLBY PRO LOGIC and DOLBY 3 STEREO can be used when playing video, DVD, or LD software[...]

25 Operations KRF-V8010D (En/T) Convenient functions SOUND TUNING/SKIP SUBWOOFER VOLUME MULTI CONTROL SOUND DISPLAY Adjusting the sound You can make further adjustments to the sound while listening to playback in the surround mode. 1 Press the SOUND key to select the item you want to adjust. Each press switches the selection as listed below. Note t[...]

26 Other KRF-V8010D (En/T) Resetting the Microcomputer If the microcomputer may malfunction (unit cannot be operated, or shows an erroneous display) if the power cord is unplugged while the power is ON, or due to some other external factor. If this happens, execute the following procedure to reset the micro- computer and return the unit to its norm[...]

27 Other KRF-V8010D (En/T) Notes 1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice. 2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature). Memory back up function Please note that the following items will be de[...]

28 Other KRF-V8010D (En/T) For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your dealer for information or service on this product. Model __________________ Serial Number _____________[...]