Kodak i1800 Series manual

User’s Guide i1800 Series Scanners Eastman Kodak Company 343 State Street Rochester, NY 14650 U.S.A. © Kodak, 2007. All rights reserved. TM: Kodak COLORS 9E8273A 8.5 x 11” Folded 6079-232 GUIDE COVER-KODAK SCANNERS FO NTS Whitney K Family S IZ E ECO P/N DESIGNER MODIFIED 10.11.07 9E8273A DE MEYER ARTWORK NAME PRINTING INFORMATION 4 COLOR PROCE[...]

A-61555 March 2007 i Content s 1 Introducti on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Scanner features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 System requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

ii A-61555 March 2007 Adjusting the height of the scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-14 Feeding document s using multi-feed detection . . . . . . . . . . . . . . . . . . . . 3-15 Automatic feeding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-15 Continuous feeding . . . . . . [...]

A-61555 March 2007 iii 5 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1 Cleaning frequency chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2 Cleaning tools and materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2 Suppl[...]

A-61555 March 2007 1-1 1 Introduction This User ’s Guide provides info rmation and procedure s for the Kodak i1800 Series Scanners. Chapter 1, Introduction — provides general information about the i1800 Series Scanners including a product description, scanner features, safety information, user precautio ns and how to contact Service and Support[...]

1-2 A-61555 March 2007 Scanner features • Excellent paper handling , image quality , and reliability . • Color or grayscale at the same speed as bla ck-and-white. • Color touchscreen for easy operator use. • Simultane ous black-and-white and color/grayscale image output. • Handles a broad range of p aper weights and sizes. • Built-in Pa[...]

A-61555 March 2007 1-3 System requirement s Following is the minimum recommended system configuration to run the Kodak i1800 Series Scanners. NOTE: The actual performance of the system d epends on the scanning application, choice of scanning parameters, and the host computer configuration. If the scanner is not performing at the optimal speed, a fa[...]

1-4 A-61555 March 2007 Cont acting Service and Support T eleph one and on-site service by trained Kodak Field Engineer is available as part of the warranty and Service Agreement. Refer to your Service Agreement T erms and Conditions for hours of a vailability . Only a trained scanner operator should place a call to the Kodak Service Center and have[...]

A-61555 March 2007 1-5 Safety information W arning labels MSDS Material Safety Data Sheet s (MSDS) are available on the Kodak website at: www .kodak.com/go/ms ds. When accessing the MSDSs from the website, you will be required to provide the catalog number of the consumable for the Material Safety Dat a Sheet you are requesting. See Chapter 5, “S[...]

1-6 A-61555 March 2007 Environment al information • The product packaging is recyclable. • The i18 0 0 Seri e s Sc a nners are En e rgy S t ar c o mpliant a nd are shipp e d from the f a ctory with t he de f ault t ime set t o 15 minu t es. European Union This symbol indicates that when the la st user wish es to discard this product, it must be[...]

A-61555 March 2007 1-7 Peoples Republic of China W ARNING: This is a Class A produc t. In a domestic environment this product may cause radio interference in which case the user may be required to t ake adequate measures. Korean Please note that this equipment ha s obtained EMC registration for commercial use. In the event that it has been mist ake[...]

A-61555 March 2007 2-1 2 Getting St arted Scanner component s Front view 1 Power switch — press the power switch on (I) or of f (O) as required. 2 Input elevator — holds document s for scanning. The input elevator can be set to accommodate st acks of 25-, 100-, 250- or 500-documents (20 lb. bond paper). 3 Input elevator extende r — open the i[...]

2-2 A-61555 March 2007 8 Service K-Number — the number on this sticker is the n umber you will be asked to provide w hen placing a call Koda k Service. 9 POD release latch — push up the POD release latch when you need to access the inside of the scanne r . 10 Output tray and end stop — collect s the scanned documents. The output tray wid th a[...]

A-61555 March 2007 2-3 18 Storage pocket — provides a convenient and easy-access area for storing calibration ta rgets and documenta tion.[...]

2-4 A-61555 March 2007 Internal component s 1 Sep aration roller — provides smooth document feeding of various sizes and textures one document at a time. 2 Pre-sep aration pa d — provides smooth document feeding of various sizes and textures one document at a time. 3 Document sensor — detect s the presence of documents in the paper p ath duri[...]

A-61555 March 2007 2-5 7 Multi-feed sensors — the scanner has three (ultrasonic) multi- feed detection sensors. These sen sors are used to detect if more than one document enters the p aper path at one time cau sing a multi-feed. Rear view 1 Power cord connection — provides p ower to the scanner . The scanner is packed with multiple power cords[...]

A-61555 March 2007 3-1 3 Using the Scanner This chapter provides the follo wing op erational procedures: • T urning on/off the scanne r • S tarting and stopping the scanner • Document prep aration • Adjusting the input elevator • Adjusting the output tray • Adjusting the height of the scanner • Scanning document s • Automatic, conti[...]

3-2 A-61555 March 2007 After you power u p the scanner , the following screen will be displayed. When the scanner completes the power-u p sequence, the Idle screen will be displayed. See the section entitle d, Using the touchscreen” later in this chapter for information about th e Idle screen. IMPORT ANT : Always power up the host computer to it [...]

A-61555 March 2007 3-3 T urning the scanner off • Press the power switch on the lef t-side of the scanner to the off (O) position. NOTES: • Y ou do not need to turn the main brea ker switch off unless you are going to move the scanner . • There are four leveling feet on the bottom of the scanner . If you need to move the scanner , these level[...]

3-4 A-61555 March 2007 Feeder Cap acity: The input elevator can hold up to 500 sheet s of 75 g/m 2 (20 lb.) paper . Before you begin scanning document s, make certain the document s can be fed through the scanner easily . • A stack of document s to be fed into the scanner must be arranged so the leading edges of all document s are aligned under t[...]

A-61555 March 2007 3-5 Adjusting the input elevator Adjusting the side guides 1. Place the documents in the input elevator . 2. Adjust the side guides to fit the document s. The side guides should be far enough ap art to accommodate the widest document that you are feeding. Selecting your feeding position The side guides can be adjusted for right-e[...]

3-6 A-61555 March 2007 Adjusting the height of the input elevator The input elevator can be set to accommodate stacks of 25-, 100-, 250- or 500-document s of 20 lb. bond paper . Input elevator sett ings are made through the TW AIN Data source or ISIS Driver . NOTE: In this document 25 will be referred to as the highest setting and 500 as the lowe s[...]

A-61555 March 2007 3-7 Inst alling the document extender • Insert the ends of the document ext ender into the holes o n the input elevator and lower the extender into po sition. Output tray options The scanner is shipped with a st andard output tray and a short document tray . Use the short document tray when scanning documents less than 15.2 cm [...]

3-8 A-61555 March 2007 Adjusting the output tray for document lengths up to 43.2 cm (17 in.) Adjusting for document length involve s selecting an output tray position and angle, positioning the end stop, or removing the end stop and installing a document extender . Reviewing the following tab le will help you determine the best position for your ou[...]

A-61555 March 2007 3-9 Adjusting the end stop Adjust th e output tray end stop to slightly longer than the longest document being fed. Adjusting the angle of the output tray In addition to adjusting the back of the output tray , you can adjust the front of the tray by swinging the heig ht adjustment wire out from underneath the output tr ay and pla[...]

3-10 A-61555 March 2007 2. Swing the height adjustment wire o ut from underneath the output tray and insert it into one of the grooves on the printer access cover . 3. When finished using the outp ut tray in this position, tuck the height adjustment wire back into position a nd lower the output tray .[...]

A-61555 March 2007 3-1 1 The exit deflector The exit deflector aids in documen t st acking. When feeding light-weight documents, it is suggeste d that the exit deflector be removed. The exit deflector can be easily removed by gently pu lling it out of the holding clips. Th ere are three positi ons that the exit deflector can be placed in. • If yo[...]

3-12 A-61555 March 2007 Adjusting the output tray for document s from 43.2 cm (17 in.) to 86 cm (34 in.) Documents longer than 17 inches require a document extender . Three sizes of document exten ders ar e available for scanning documents from 43.2 cm (17 in.) to 86 cm (34 in.). See the section ent itled, “Ordering part s” in Chapter 5 or c on[...]

A-61555 March 2007 3-13 Adjusting the short document tray 1. Remove the end stop on the outpu t tray . 2. Slide the short document tray on the rail of the output tray and push it up to the desired position to accommo date your documents. 3. Adjust the sides guides as necessary .[...]

3-14 A-61555 March 2007 Adjusting the height of the scanner The workspace t able can be raised appr oximately 25.4 cm (10 in.) from its lowest position for your comfo rt when you are sitting or standing at the scanner . When you are raising or lowering the worksp ace table, be sure that there is nothing close to the scanner that would interfere wit[...]

A-61555 March 2007 3-15 Feeding document s using multi-feed detection The scanner has three multi-feed detect ion sensors that can be independently enabled or disabled. Wh en multi-feed detection is enabled, adjust the side guides so the documents fully cover at least one sensor . If the document p artially covers a sensor , false multi-feeds may o[...]

3-16 A-61555 March 2007 Continuous feeding Continuous feeding can be used when you want to continuously sca n small stacks of document s (less than 25) without stopping/st arting a scan session. When the input elevator is in highest position , continuous feeding of small stacks of docume nts can be ac complished by a dding them to the bottom of the[...]

A-61555 March 2007 3-17 Feeding document s that require special handling The gap release button allows you to man ually adjust the space between the feed module and sep aration roller for document s that require special handling; e.g., document s that are badly torn. If you are in doubt about whether a damaged document can be transported through th[...]

3-18 A-61555 March 2007 Using the operator control p anel touchscreen There are a variety of functions tha t can be accessed by using the operator control panel touchscreen. If there are three dots af ter the function, another screen will be displaye d allowing you to make additional choices. For more information and proced ures for using these fun[...]

A-61555 March 2007 3-19 In addition from Idle mode, you can setup or change scann er configuration settings, and enable or d isable imaging addressing by using the Settings screen. The Settings screen allows you to set or change the following options: • V olume • T ones • Language • Enabling or disabling ima ge addressing • Calibration Se[...]

3-20 A-61555 March 2007 Changing the alarm volume The V olume screen allows you to adjust the volume of the alarm f rom a Ve r y H i g h volume (loudest) to a Low volume (quietest) or to Off (no sound). The default is Low . 1. T ouch Vo l u m e on the Settings screen to display the V olume screen. 2. Select the V olume option that you want. A tone [...]

A-61555 March 2007 3-21 Selecting the tone Y ou can select the tone you want the scanner to make wh en a particular scanner condition is enc ountered such as, document jam or multi-feed, etc. 1. T ouch T one Select to display the T ones screen. 2. Select the event (e.g., W arning, Jam, etc.) that you want a tone to be set for . When you select an E[...]

3-22 A-61555 March 2007 Selecting a language The Kodak i1800 Series Scanners supp ort several languages. Select the language you want the information on the touchscreen to be displayed in. 1. T ouch Language to display the Language screen. 2. T ouch the desired language. The scree n will automatically be updated in the language of cho ice. If the l[...]

A-61555 March 2007 3-23 Enabling/disabling image addressing (for i 1860 Scanner only) An image address is a unique id ent ifier assigned to each individual document and may contain up to 30 characters (up to a maximum of 27 characters, plus 3 delimiters). An Image Address template is set up using the TW AIN Data source or ISIS Driver . See the on-l[...]

3-24 A-61555 March 2007 If you change the st atus of the image address, the following message will be displayed. 3. T ouch Y es to change the image address st atus and restart the system, otherwis e click Close . 4. Restart the scanner . NOTE: Disabling image addressing also disables the Patch Readers and batching. T oggle patch fun c tionality wil[...]

A-61555 March 2007 3-25 Calibrating the scanner The Kodak i1800 Series Scanners allow you to perform an Image calibration (black-and-white , color , grayscale) and UDDS calibration (multi-feed detection). Calibration optimizes your scan ner to achieve the best image quality and feeding performance. Y our scanner is properly calibrated when you purc[...]

3-26 A-61555 March 2007 UDDS Calibration UDDS calibration is used to calib rate the ultrasonic document detection system for multi-feeds. UDDS ca libration is rarely needed. This calibration should only be pe rformed if there is a feeding or multi-feed detection issue. 1. T ouch Calibrate . The Calibration screen will b e displayed. 2. T ouch UDDS [...]

A-61555 March 2007 3-27 Idle screen The Idle screen provides a st atus bar , function list, scroll arrows and the Settings button. When image addressing is enabled, the image address level buttons and batch count information will also be d isplayed. NOTE: Image Addressing, Patch Reading and Batch functi onality are only available for th e Kodak i18[...]

3-28 A-61555 March 2007 Operator Log When you touch Operator Log, the Op erator Log screen will be displayed. This screen provides the time, message cod e and a message description. The messages that are disp layed in the log are only those messages that have been posted since the scanner was powered on. Whe n you turn the power of f, the Operator [...]

A-61555 March 2007 3-29 Accessing scanner information This screen provides information a bout your scan ner . If you are using image addressing, the last image addr ess value is d isplayed on this screen. 1. T ouch Information on the Idle screen to display scanner information. 2. After viewing this info rmation, touch Close to return to the Idle sc[...]

3-30 A-61555 March 2007 Count only mode Y ou may want to count the number of document s entering the scanner without actually scanning them. 1. T ouch Count Only Mode . The Count Only screen will be displayed. 2. Place the documents you want to count in the input elevator . 3. T ouch OK . When the scanner ha s scanned all documents, the tot al numb[...]

A-61555 March 2007 3-31 Performing a Print test The print test checks to be sure the ink jet s in the Enhanced Printer are working properly . 1. T ouch Print T est . The Print T est screen will be displayed. 2. Place a blank sheet(s) of p aper in the input elevator . 3. T ouch OK . The document(s) in the output tray will display the results of the [...]

3-32 A-61555 March 2007 Performing a Patch test Use the Patch test to verify that the Patch Readers are operational and that your p atches are being read. 1. T ouch Patch T est . The Patch T est screen will be displayed. 2. Place a document(s) with a p atch(es) in the input elevator . 3. T ouch OK . When the document(s) has been scanned , the resul[...]

A-61555 March 2007 3-33 Enabling the scanner In order to scan document s, the scanner must be enabled. This is done using the capture application sof tware. When the scanner is enabled, the following screen is displayed. Scanning Af ter enabling the scanner , depending on how your scanner is configured, your scanner will automatically st art scanni[...]

3-34 A-61555 March 2007 Using function keys when scanning Up to three additional functions may appear on the touchscreen when scanning. These functions are set up by t he capture software application. Options which may appear a re: •O m i t p a t c h •O m i t p r i n t • Omit multifee d • End batch T o select a function, touch the function [...]

A-61555 March 2007 3-35 Manually p ausing and resuming the scanner Y ou can manually pause and resume the scanner while scanning documents. • T ouch Pause on the touchscreen to stop scanning. The Pause button now becomes the Resume button. • T ouch Resume on the t ouchscreen to restart scanning after it has been paused. Automatically p ausing a[...]

3-36 A-61555 March 2007 Power Saver mode The Kodak i1800 Series Scanners are configured from the facto ry to go into Power Saver mode af ter 15 minut es of inactivity . This setting can be changed by your capture sof tware application. If Power Saver is enabled, the scanner will begin a one-minute count-down prior to entering Powe r Saver mode. Whe[...]

A-61555 March 2007 4-1 4 The Enhanced Printe r and Patch Readers This chapter provides instructions for using the Enhance d Printer and Patch Readers. The following inform ation and procedures can be found in this chapter: • Overview information about the Enha nced Printer , including information about print field s and printer specifications. ?[...]

4-2 A-61555 March 2007 Printer specifications Characteristic Des cription Maximum lines 1 Maximum characters 40 Print locations (horizont al) 12 front, 8 rear , manually set, Print locations (vertical) Set by capture software applica tion Print orient ation 0, 90, 180 or 270 degrees Font size 2 selectable, Bold or Normal NOTE: Not all languages can[...]

A-61555 March 2007 4-3 Changing print positions The horizontal print p osition can be changed manually . Y ou can change the front or rear print position. Changing the front horizont al print position 1. Remove the output tray . 2. Open the print access cover . There are 12 horizont al print posi tions. These positi ons are visible by a small deten[...]

4-4 A-61555 March 2007 3. The printer carrier slides easily along the rail. There is a small arrow on the green printer carrier . Slide the printer carrier to the desired position aligning the arrow with the detent posit ion on the rail. 4. Close the printer access cover . 5. Reinstall the ou tput tray . NOTE: Printing automatically stops app roxim[...]

A-61555 March 2007 4-5 Moving the printer carrier and cable from the front to the rear or vice versa The scanner comes with the printer carrier and ribbon cable installed for front pre-scan printing. If your application requires rear post-scan printing, the printer carrier and cable must b e moved from the front to the rear position. Printing can o[...]

4-6 A-61555 March 2007 Moving the printer carrier and cabl e from rear position to the front position NOTE: Remove the ink cartridge before you begin. See the next section “Replacing the ink cartridge” for procedures. 1. Open the top access cover . 2. Disconnect the ribbon cable. 3. Remove the printer carrier . 4. Close the top access cover . 5[...]

A-61555 March 2007 4-7 Replacing the ink cartridge Replace the ink cartridge when: • printed characters appear light or uneven • missing characters are evident • a print test reveals inconsistent character quality • cleaning has not improved the o verall print quality Procedures for changing the ink cartridge, whethe r it is in the front po[...]

4-8 A-61555 March 2007 6. Press and hold the release t ab on the bottom of the printer carrier and rotate the printer carrier back into position. NOTE: If the ribbon cable should become disco nnected, snap it back into position. 7. Slide the printer carrier into the desired position matching the arrow on the printer carrier with the detent positio [...]

A-61555 March 2007 4-9 Replacing the front blotter strip s Blotter strip s collect ink overflow . They should be replaced when there is a build-up of ink. Replaceme nt blotter strips may be purchased through your supplier . 1. Open the pod. 2. Use the green t ab to lift and remove the ink blotter strip cover to access the front blotter strip s. 3. [...]

4-10 A-61555 March 2007 6. Align the blotter strip in the transpo rt channel. Be sure it is properly aligned before pressing the adhesive side into the channel. 7. Press the blotter strip firmly into the chann el. 8. Repeat S teps 5 - 7 for the other blotte r strip, if necessary . 9. Replace the ink blotter strip cover . 10. Close the pod.[...]

A-61555 March 2007 4-1 1 Replacing the rear blotter strip s Blotter strip s collect ink overflow . They should be replaced when there is a build-up of ink. Replaceme nt blotter strips may be purchased through your supplier . 1. Remove the output tray . The rear blotter strips are located in the two drawers underneath the baf fle. 2. Open the one of[...]

4-12 A-61555 March 2007 Patch function overview All i1800 Series Scanners provide toggle p atch capability . This type of patch is used to trigger th e scanner to switch from the current image stream (black-and-white) to the alternative image stream (co lor/ grayscale). Patches used for image ad dress level changes are only valid when using an i186[...]

A-61555 March 2007 4-13 T oggle Patch When image addressing is disabl ed, the Patch Readers are also disabled. However a T oggle pa tch can still be dete cted. Patch T ypes 2, 3 and T — these patch types are u sed for image addressing. The Patch Readers control do cument level changes by automatically sensing a predefined patch code an d changing[...]

A-61555 March 2007 5-1 5 Maintenance This chapter provides: • a cleaning frequency chart • a list of cleaning tools and materials • a list of supplies, consumables and accessories • cleaning procedures for the scanner • replacement procedures for customer-replaceable part s IMPORT ANT : Scanner component s marked with a green tab indicate[...]

5-2 A-61555 March 2007 Cleaning frequency chart A recommended cleaning sequence in cludes vacuuming the scanner transport, cleaning the resid ue from the feed module, separation roller or drive rollers and cl eaning the imaging guides. Use the chart below as a guide to the order and how frequently you should clean your scanner . Cleaning tools and [...]

A-61555 March 2007 5-3 Supplies, consumables and accessories Contact your scanner supplier t o order supplies. NOTE: Items and catalog numbers are subject to change. Ordering p arts The following part s can be ordered from Parts Services. Supplies/Consumables CA T No. Kodak Feeder Consumables Kit for i600/i1800 Series Scanners 108 4755 Kodak Feeder[...]

5-4 A-61555 March 2007 Cleaning procedures Follow the cleaning procedure below to ensure the best scanner performance and image quality . Cleaning the OCP touchscreen The touchscreen requires very little maintena nce. However , periodically , it is recommended that you use a S taticide wipe to clean the screen and dry it with a lint free clo th. V [...]

A-61555 March 2007 5-5 Cleaning the rollers Cleaning the rollers includes all of the rollers in the transport area, the separation roller tire s and the feed module tires. 1. Pull up on the pod release lever and open the pod. 2. Manually rotate and wipe the roll ers with a roller cleaning p ad. IMPORT ANT : The roller cleaning pad cont ains sodium [...]

5-6 A-61555 March 2007 Cleaning the sep aration roller tires 4. Pull the separation p ad holder forward and remove the sep aration roller . 5. Manually rotate and wipe the separation roller tires with a roller cleaning pad. For best result s wipe parallel to the ribs in ord er to remove any residue between the ribs. 6. Inspect the tires. If the tir[...]

A-61555 March 2007 5-7 Cleaning the feed module tires 9. Lift up the printe r access cover . 10. Push the release lever down (located undernea th the printer access cover) to release and remove the feed module.[...]

5-8 A-61555 March 2007 1 1. Manually rotate and wipe the fe ed module tires with a roller cleaning pad. For best result s wipe parallel to the ribs in order to remove any residue between the ribs. 12. Inspect the tires. If the tires show signs of we ar or damage, replace the feed module tires. See “Replacement procedures” later in this chapter [...]

A-61555 March 2007 5-9 V acuuming the transport area 1. Open the pod. 2. Thoroughly vacuum the entire transport area, p aying particular attention to these areas: V acuuming under the background strip s 1. Using the green tabs pull of f the upper and lower background strips and set them aside. 2. V acuum the areas where the background strips are ad[...]

5-10 A-61555 March 2007 Cleaning the imaging guides — basic cleaning 1. Open the pod. 2. Wipe the upper and lower imaging guides with a S taticide wipe. IMPORT ANT : S taticide wipes contain isoprop anol which can cause eye irritation and dry skin. Wash your hands with soap and water after performing maintenance procedures. Refer to the MSDS for [...]

A-61555 March 2007 5-1 1 Cleaning the imaging guides — thorough cleaning Thorough cleaning of the ima ging guides is recommended at the start of the day and beginning of each shif t. NOTE: Hold the imaging guides at the green ta bs to avoid getting fingerprints on the imaging gui des during the cleaning procedure. Upper imaging guide 1. Open the [...]

5-12 A-61555 March 2007 Lower imaging guide 1. T urn the screw on each end of the lower imaging guide, remove it from its position and set it aside. 2. Carefully vacuum the areas b etween the lamps, then use a S taticide wipe to thoroughly clean the glass plate bet ween the lamps. 3. Clean the lower imaging guide th oroughly with a S taticide wipe.[...]

A-61555 March 2007 5-13 7. When finished with all clea ning procedures, reinstall the output tray . 8. T urn on the scanner . Running a transport cleaning sheet The transport should be cleaned with a T ransport Cleaning Sheet fed several times. 1. Remove the wrapping from the T ransport Cleaning Sheet. 2. Adjust the side guides to the widest positi[...]

5-14 A-61555 March 2007 The Count Only screen will be displayed. 5. T ouch Scan . 6. Remove the transport cleaning sheet from the output tray and place it in the center of the input elevat or in landscape orientation with the adhesive side down and touch Scan . 7. When finished, touch End J ob . NOTE: When the transport sheet get s dirty , discard [...]

A-61555 March 2007 5-15 Replacement procedures This section provides procedures for replacing the following parts. Use the list below as a guideline for frequency of replacement. • Feed module tires and sep aration roller tires — tire life will vary depending upon p aper types, environm ent and cleanliness. Nomin al tire life is approximately 5[...]

5-16 A-61555 March 2007 4. Push down on the release lever (located und erneath the printer access cover) to release and remove the feed module. 5. If you are just replacing the feed module, do the following. If you are replacing the tires, go to S tep 6. • Insert the new fee d module by aligning the pins, fitting it into position and pulling up o[...]

A-61555 March 2007 5-17 If you want to replace the tires, proceed as follows: 6. With one hand, press the locking t abs (one on each side) while holding the bottom housing with the other h and, pull the upper housing up and away from the rollers. 7. Remove one core assembly . 8. Replace each tire by sliding the tire off the core. 9. Install each ne[...]

5-18 A-61555 March 2007 12. Align the tabs on the u pper housing with the slots on the lower housing. 13. Press the upper and lower housings together until they snap into place. 14. Reinstall the feed mo dule by aligning the pins, fitting it into position and pulling up on the release lever to lock it into place. V erify that the feed module is sec[...]

A-61555 March 2007 5-19 Replacing the sep aration roller or sep aration roller tires 1. Open the pod. 2. Pull the separation p ad holder forward and remove the sep aration roller . If you want to replace the sep aration roller , do S teps 3 and 4. If you want to replace the sepa ration roller tires, go to S tep 5. 3. Insert the new separation rolle[...]

5-20 A-61555 March 2007 Replacing the pre- sep aration pad Change the pre-sep aration pad when the frequency of multi-fed documents increases. 1. Open the pod. 2. Remove the pre-separation p ad by lifting the p ad up and out of position. 3. Install the new pr e-separation pad . Be sure it snaps into place. 4. Close the pod. Replacing the imaging gu[...]

A-61555 March 2007 6-1 6 T roubleshooting This chapter provides: • Information on how to access the Operato r Log. • A problem solving chart. • A message listing of possible erro rs you may encoun ter while using the scanner . Accessing the Operator Log The Operator Log is accessed through the Operator Control Panel touchscreen or Scan V alid[...]

6-2 A-61555 March 2007 Accessing the Operator Log from the Scan V alidation too l 1. Select S tart>Programs>Kodak>Document Ima ging>Scan V alidation T ool . 2. From the Driver T ypes box, select TW AIN . 3. From the Drivers box, select Kodak Scanner: i1800 and click OK. 4. Select the Scanner icon.[...]

A-61555 March 2007 6-3 5. From the main screen, click Settings . The Settings screen will be displayed. 6. Select Device .[...]

6-4 A-61555 March 2007 The Device screen will be displayed. 7. Click Diagnostics . The Diagnostics screen will be displayed. 8. Select the Logs tab. 9. Select Operator from the drop-down box. The most current log entries are displayed at the top of the list. See the following Message Listing for an explanation of error cond itions. NOTE: The Kodak [...]

A-61555 March 2007 6-5 Message listing Following is an alphabetic list of messages and corrective actio ns you can take if on e of the following messages is encountered. Messages ID# Operat or Message Background accessory ch anged while powered up 381 The Background Accessory was chan ged while the scanner was powered on. • T urn the power off to[...]

6-6 A-61555 March 2007 Messages ID# Operat or Message Clean upper imaging guide 2 93, 304 The upper imaging guide is dirty or there may be a small piece of paper in the ima ging guide area. • Clean the imaging guides. See Chapte r 5, Maintenance for procedures. Document count exceed ed maximum value 124 The document counter is larger tha n the ma[...]

A-61555 March 2007 6-7 Messages ID# Operat or Message Input elevator too fu ll, feed module missing or broken 297 • There is too much paper in the inpu t elevator and it is ho lding the feed module up. Th e maximu m input elevator capacity is 500 sheet s. Remove some documents from the input ele vator . • The feed module is not installe d prope[...]

6-8 A-61555 March 2007 Messages ID# Operat or Message Paused waiting for host 1, 48 The feeder has stopped and the transport is still running because the scanner’s internal image buf fer is almost full. Processing will automatically resu me after the capture sof tware application has successfully retrieved enoug h images to allow the scanner to c[...]

A-61555 March 2007 6-9 Messages ID# Operat or Message UDDS calibration failed 333 Th e UDDS calibration failed. • Be sure you are using the correct u ltrasonics calibration targ et. See Chapter 3, “Calibrating the scanner”. • Clean the sensors and try again. • If the problem persist s, call Service. UDDS calibration succeeded 332 Informat[...]

6-10 A-61555 March 2007 Numerical message listing Use the following numeric listing to quickly find an error . Use the previous Message Listing chart for det ails and actions regarding the error condition. ID# Operator Message 1 Paused waiting for host 4 Invalid job setup 5 Unable t o scan 6 Power up self-test failed 19 Lamps no t ready for scannin[...]

A-61555 March 2007 6-1 1 Cont acting Service Refer to the section entitled, “Cont acting Support” in Chapter 1 for phone numbers and det ailed information. ID# Operator Message 184 Cannot calibrate with white background 260 No paper in input elevator 280 Lamps read y for scanning 281 Printer bitmap font in use 282 Ink cartridge not inst alled 2[...]

6-12 A-61555 March 2007 Problem solving Use the chart below as a guide to check possible solutions to problems you may encounter when usin g the Kodak i1800 Series Scanners. Problem Possible Solut ion Scanner does not powe r on Make sure that: • the power cord is plugged securely into th e receptacle in the back of the scanner . • the wall outl[...]

A-61555 March 2007 6-13 Problem Possible Solut ion Calibration has failed Make sure that: • you are using the proper calibration target and it is orien ted correctly for the type of calibration yo u are perfo rming. The Im age calibrat ion target and Ultrasonics calibration t arget are differ ent. • the imagin g guides are clean. • the tra ns[...]

A-61555 March 2007 A-1 Appendix A Accessories This chapter provides a description of the accessories that are available for use the Kodak i1800 Series Scan ners. Kodak Ultralightweight Paper Feed Module The Kodak Feeder Kit for Ultralightweight Paper for i600/i1800 Series Scanners allows you to feed lightweight p aper from a paper weight range of 2[...]

A-61555 March 2007 B-1 Appendix B Specifications Scanner T ype/Speed i1840 Scanner : Duplex color scanner with an automatic document feeder including the enhanced printer , 160 pa ges per minute (landscape) i1860 Scanner : Duplex color scanner with an automatic document feeder including the enhanced printer , 200 pa ges per minute (landscape) Scann[...]

User’s Guide i1800 Series Scanners Eastman Kodak Company 343 State Street Rochester, NY 14650 U.S.A. © Kodak, 2007. All rights reserved. TM: Kodak COLORS 9E8273A 8.5 x 11” Folded 6079-232 GUIDE COVER-KODAK SCANNERS FO NTS Whitney K Family S IZ E ECO P/N DESIGNER MODIFIED 10.11.07 9E8273A DE MEYER ARTWORK NAME PRINTING INFORMATION 4 COLOR PROCE[...]