Lenovo THINKCENTRE 8084 manual
- Consulta online o descarga el manual de instrucciones
- 228 páginas
- 8.72 mb
Ir a la página of
manuales de instrucciones parecidos
-
Computer Accessories
Lenovo 6019
506 páginas 14.52 mb -
Computer Accessories
Lenovo 8178
228 páginas 8.32 mb -
Computer Accessories
Lenovo 59RF0172
49 páginas 7.67 mb -
Computer Accessories
Lenovo 0A33942
38 páginas 0.72 mb -
Computer Accessories
Lenovo K5923
1 páginas 8.99 mb -
Computer Accessories
Lenovo 8176
228 páginas 8.32 mb -
Computer Accessories
Lenovo 0C19868
56 páginas 8.69 mb -
Computer Accessories
Lenovo 8085
228 páginas 8.32 mb
Buen manual de instrucciones
Las leyes obligan al vendedor a entregarle al comprador, junto con el producto, el manual de instrucciones Lenovo THINKCENTRE 8084. La falta del manual o facilitar información incorrecta al consumidor constituyen una base de reclamación por no estar de acuerdo el producto con el contrato. Según la ley, está permitido adjuntar un manual de otra forma que no sea en papel, lo cual últimamente es bastante común y los fabricantes nos facilitan un manual gráfico, su versión electrónica Lenovo THINKCENTRE 8084 o vídeos de instrucciones para usuarios. La condición es que tenga una forma legible y entendible.
¿Qué es un manual de instrucciones?
El nombre proviene de la palabra latina “instructio”, es decir, ordenar. Por lo tanto, en un manual Lenovo THINKCENTRE 8084 se puede encontrar la descripción de las etapas de actuación. El propósito de un manual es enseñar, facilitar el encendido o el uso de un dispositivo o la realización de acciones concretas. Un manual de instrucciones también es una fuente de información acerca de un objeto o un servicio, es una pista.
Desafortunadamente pocos usuarios destinan su tiempo a leer manuales Lenovo THINKCENTRE 8084, sin embargo, un buen manual nos permite, no solo conocer una cantidad de funcionalidades adicionales del dispositivo comprado, sino también evitar la mayoría de fallos.
Entonces, ¿qué debe contener el manual de instrucciones perfecto?
Sobre todo, un manual de instrucciones Lenovo THINKCENTRE 8084 debe contener:
- información acerca de las especificaciones técnicas del dispositivo Lenovo THINKCENTRE 8084
- nombre de fabricante y año de fabricación del dispositivo Lenovo THINKCENTRE 8084
- condiciones de uso, configuración y mantenimiento del dispositivo Lenovo THINKCENTRE 8084
- marcas de seguridad y certificados que confirmen su concordancia con determinadas normativas
¿Por qué no leemos los manuales de instrucciones?
Normalmente es por la falta de tiempo y seguridad acerca de las funcionalidades determinadas de los dispositivos comprados. Desafortunadamente la conexión y el encendido de Lenovo THINKCENTRE 8084 no es suficiente. El manual de instrucciones siempre contiene una serie de indicaciones acerca de determinadas funcionalidades, normas de seguridad, consejos de mantenimiento (incluso qué productos usar), fallos eventuales de Lenovo THINKCENTRE 8084 y maneras de solucionar los problemas que puedan ocurrir durante su uso. Al final, en un manual se pueden encontrar los detalles de servicio técnico Lenovo en caso de que las soluciones propuestas no hayan funcionado. Actualmente gozan de éxito manuales de instrucciones en forma de animaciones interesantes o vídeo manuales que llegan al usuario mucho mejor que en forma de un folleto. Este tipo de manual ayuda a que el usuario vea el vídeo entero sin saltarse las especificaciones y las descripciones técnicas complicadas de Lenovo THINKCENTRE 8084, como se suele hacer teniendo una versión en papel.
¿Por qué vale la pena leer los manuales de instrucciones?
Sobre todo es en ellos donde encontraremos las respuestas acerca de la construcción, las posibilidades del dispositivo Lenovo THINKCENTRE 8084, el uso de determinados accesorios y una serie de informaciones que permiten aprovechar completamente sus funciones y comodidades.
Tras una compra exitosa de un equipo o un dispositivo, vale la pena dedicar un momento para familiarizarse con cada parte del manual Lenovo THINKCENTRE 8084. Actualmente se preparan y traducen con dedicación, para que no solo sean comprensibles para los usuarios, sino que también cumplan su función básica de información y ayuda.
Índice de manuales de instrucciones
-
Página 1
Hard w ar e M a in t e n a n c e Ma nu a l Ty p e s 808 4 , 8085 , 81 2 6 , 81 4 7 , 81 4 8 , 81 4 9 Ty p e s 81 74 , 81 7 5 , 81 7 6 , 81 7 7 , 81 7 8 , 81 7 9[...]
-
Página 2
[...]
-
Página 3
Hard w ar e M a in t e n a n c e Ma nua l Ty p e s 808 4 , 8085 , 81 2 6 , 81 4 7 , 81 4 8 , 81 4 9 Ty p e s 81 74 , 81 7 5 , 81 7 6 , 81 7 7 , 81 7 8 , 81 7 9[...]
-
Página 4
Note: Before using this information and the pr oduct it supports, be sure to read the information under “Notices,” on page 219. Sixth Edition (August 2005) © Copyright Lenovo 2005. Portions © Copyright International Business Machines Corporation 2005. All rights reserved. U.S. GOVERNMENT USERS – RESTRICTED RIGHTS: Our products and/or servic[...]
-
Página 5
Contents Chapter 1. About this manual . . . . .1 Important Safety Information . . . . . . . . .1 Strategy for replacing FRUs for CT O, CMV , and GA V products . . . . . . . . . . . . . . . .2 Product definition . . . . . . . . . . .2 FRU Identification for CTO, CMV , and GA V products . . . . . . . . . . . . . . .2 Important information about repla[...]
-
Página 6
Locating components . . . . . . . . . . . 123 Identifying parts on the system board . . . . . 124 Removing and replacing memory . . . . . . 125 Removing and replacing a PCI adapter . . . . . 125 Removing and replacing the battery . . . . . . 127 Removing and replacing the power supply . . . 127 Removing and replacing the system boar d . . . 128 Rem[...]
-
Página 7
Chapter 1. About this manual This manual contains service and refer ence information for ThinkCentre ® computers listed on the cover . It is intended only for trained servicers who are familiar with Lenovo computer products. Before servicing a Lenovo pr oduct, be sure to read the Safety Information. See Chapter 2, “Safety information,” on page[...]
-
Página 8
Strategy for replacing FRUs for CTO, CMV , and GA V products Product definition Dynamic Configure To Order (CTO) This provides the ability for a customer to configur e a Lenovo solution from an eSite, and have this configuration sent to fulfillment, wher e it is built and shipped directly to the customer . The machine label, PC Entitlement W arehou[...]
-
Página 9
4. Under W arranty Information, type the MT and Serial number and click Submit . The list of key commodities is returned in the PEW r ecord under Component Information. v Business Partners using Eclaim will access PEW when performing Entitlement Lookup. Business Partners will enter Loc ID, MT and Serial, and the key commodities will be returned in [...]
-
Página 10
So, if the parts are not compliant originally , replacement parts can also be noncompliant, but in all cases, if the parts are compliant, the replacement parts must also be compliant. Lenovo plans to transition to RoHS compliance well before the implementation date and expects its suppliers to be ready to support Lenovo’s r equirements and schedu[...]
-
Página 11
Chapter 2. Safety information This chapter contains the safety information that you need to be familiar with before servicing a computer . General safety Follow these rules to ensur e general safety: v Observe good housekeeping in the area of the machines during and after maintenance. v When lifting any heavy object: 1. Ensure you can stand safely [...]
-
Página 12
CAUTION: Electrical current from power , telephone, and communication cables can be hazardous. To avoid personal injury or equipment damage, disconnect the attached power cords, telecommunication systems, networks, and modems before you open the server/workstation covers, unless instructed otherwise in the installation and configuration procedures.[...]
-
Página 13
v Always look carefully for possible hazards in your work ar ea. Examples of these hazards ar e moist floors, nongrounded power extension cables, power surges, and missing safety grounds. v Do not touch live electrical circuits with the reflective surface of a plastic dental mirror . The surface is conductive; such touching can cause personal injur[...]
-
Página 14
5. Check for any obvious alterations. Use good judgment as to the safety of any alterations. 6. Check inside the unit for any obvious unsafe conditions, such as metal filings, contamination, water or other liquids, or signs of fire or smoke damage. 7. Check for worn, frayed, or pinched cables. 8. Check that the power-supply cover fasteners (screws [...]
-
Página 15
Safety notices (multi-lingual translations) The caution and danger safety notices in this section are pr ovided in the following languages: v English v Arabic v Brazilian/Portuguese v Chinese (simplified) v Chinese (traditional) v French v German v Hebrew v Italian v Korean v Spanish DANGER Electrical current fr om power , telephone and communicati[...]
-
Página 16
CAUTION: When replacing the lithium battery , use only Part Number 33F8354 or an equivalent type battery recommended by the manufacturer . If your system has a module containing a lithium battery , replace it only with the same module type made by the same manufacturer . The battery contains lithium and can explode if not properly used, handled, or[...]
-
Página 17
CAUTION: The power control button on the device and the power switch on the power supply do not turn off the electrical current supplied to the device. The device also might have more than one power cord. To remove all electrical current from the device, ensure that all power cords are disconnected from the power source. 1 2 CAUTION: Do not place a[...]
-
Página 18
12 Hardwar e Maintenance Manual[...]
-
Página 19
Chapter 2. Safety information 13[...]
-
Página 20
≥ 18 kg (37 lbs) ≥ 32 kg (70.5 lbs) ≥ 55 kg (121.2 lbs) 1 2 14 Hardwar e Maintenance Manual[...]
-
Página 21
PERIGO A corrente elétrica pr oveniente de cabos de alimentação, de telefone e de comunicações é perigosa. Para evitar risco de choque elétrico: v Não conecte nem desconecte nenhum cabo ou execute instalação, manutenção ou reconfiguração deste pr oduto durante uma tempestade com raios. v Conecte todos os cabos de alimentação a tomad[...]
-
Página 22
CUIDADO: Ao substituir a bateria de lítio, utilize apenas uma bateria com Número de Peça 33F8354 ou um tipo de bateria equivalente recomendado pelo Se o seu sistema possui um módulo com uma bateria de lítio, substitua-o apenas por um módulo do mesmo tipo e do mesmo fabricante. A bateria contém lítio e pode explodir se não for utilizada, ma[...]
-
Página 23
CUIDADO: O botão de controle de alimentação do dispositivo e o botão para ligar/desligar da fonte de alimentação não desligam a corrente elétrica fornecida ao dispositivo. O dispositivo também pode ter mais de um cabo de alimentação. Para remover toda a corrente elétrica do dispositivo, assegur e que todos os cabos de alimentação este[...]
-
Página 24
18 Hardwar e Maintenance Manual[...]
-
Página 25
1 2 Chapter 2. Safety information 19[...]
-
Página 26
20 Hardwar e Maintenance Manual[...]
-
Página 27
Chapter 2. Safety information 21[...]
-
Página 28
1 2 22 Hardwar e Maintenance Manual[...]
-
Página 29
DANGER Le courant électrique provenant de l’alimentation, du téléphone et des câbles de transmission peut présenter un danger . Pour éviter tout risque de choc électrique : v Ne manipulez aucun câble et n’effectuez aucune opération d’installation, d’entretien ou de r econfiguration de ce produit au cours d’un orage. v Branchez to[...]
-
Página 30
A TTENTION: Remplacer la pile au lithium usagée par une pile de référence identique exclusivement, (référence 33F8354), ou suivre les instructions du fabricant qui en définit les équivalences. Si votre système est doté d’un module contenant une pile au lithium, vous devez le remplacer uniquement par un module identique, produit par le m?[...]
-
Página 31
≥ 18 kg (37 lbs) ≥ 32 kg (70.5 lbs) ≥ 55 kg (121.2 lbs) A TTENTION: Soulevez la machine avec précaution. A TTENTION: L’interrupteur de contrôle d’alimentation de l’unité et l’interrupteur dubloc d’alimentation ne coupent pas le courant électrique alimentantl’unité. En outre, le système peut être équipé de plusieurs cordon[...]
-
Página 32
VORSICHT An Netz-, T elefon- und Datenleitungen können gefährliche Spannungen anliegen. Aus Sicherheitsgründen: v Bei Gewitter an diesem Gerät keine Kabel anschließen oder lösen. Ferner keine Installations-, W artungs- oder Rekonfigurationsarbeiten durchführen. v Gerät nur an eine Schutzkontaktsteckdose mit ordnungsgemäß geerdetem Schutzk[...]
-
Página 33
CAUTION: Eine verbrauchte Lithiumbatterie nur durch eine Batterie mit der T eilenummer 33F8354 oder eine gleichwertige, vom Hersteller empfohlene Batterie ersetzen. Enthält das System ein Modul mit einer Lithiumbatterie, dieses nur durch ein Modul desselben T yps und von demselben Hersteller ersetzen. Die Batterie enthält Lithium und kann bei uns[...]
-
Página 34
≥ 18 kg ≥ 32 kg ≥ 55 kg ACHTUNG: Arbeitsschutzrichtlinien beim Anheben der Maschine beachten. ACHTUNG: Mit dem Netzschalter an der Einheit und am Netzteil wird die Stromversorgung für die Einheit nicht unterbrochen. Die Einheit kann auch mit mehreren Netzkabeln ausgestattet sein. Um die Stromversorgung für die Einheit vollständig zu unterb[...]
-
Página 35
Chapter 2. Safety information 29[...]
-
Página 36
30 Hardwar e Maintenance Manual[...]
-
Página 37
1 2 Chapter 2. Safety information 31[...]
-
Página 38
PERICOLO La corrente elettrica pr oveniente dai cavi di alimentazione, del telefono e di comunicazione può essere pericolosa. Per evitare il rischio di scosse elettriche: v Non collegare o scollegare qualsiasi cavo oppure effettuare l’installazione, la manutenzione o la riconfigurazione del prodotto durante un temporale. v Collegare tutti i fili[...]
-
Página 39
A TTENZIONE: Quando si sostituisce la batteria al litio, utilizzare solo il Numero parte 33F8354 o un tipo di batteria equivalente consigliato dal produttore. Se sul sistema è presente un modulo che contiene una batteria al litio, sostituirlo solo con un tipo di modulo dello stesso tipo della stessa casa di produzione. La batteria contiene litio e[...]
-
Página 40
≥ 18 kg ≥ 32 kg ≥ 55 kg A TTENZIONE: Prestare attenzione nel sollevare l’apparecchiatura. A TTENZIONE: Il pulsante di controllo dell’alimentazione presente sull’unità e l’interruttore dell’alimentatore non disattivano l’alimentazione corrente fornita all’unità. E’ possibile che l’unità disponga di più cavi di alimentazio[...]
-
Página 41
Chapter 2. Safety information 35[...]
-
Página 42
1 2 36 Hardwar e Maintenance Manual[...]
-
Página 43
Chapter 2. Safety information 37[...]
-
Página 44
PELIGRO La corriente eléctrica procedente de cables de alimentación, teléfonos y cables de comunicación puede ser peligrosa. Para evitar el riesgo de descarga eléctrica: v No conecte ni desconecte los cables ni realice ninguna tarea de instalación, mantenimiento o reconfiguración de este producto durante una tormenta eléctrica. v Conecte to[...]
-
Página 45
PRECAUCIÓN: Cuando sustituya una batería de litio, utilice solamente una batería número de pieza 33F8354 u otra de tipo equivalente recomendada por el fabricante. Si su sistema dispone de un módulo que contiene una batería de litio, reemplácelo sólo con el mismo tipo de módulo, del mismo fabricante. La batería contiene litio y puede explo[...]
-
Página 46
≥ 18 kg ≥ 32 kg ≥ 55 kg PRECAUCIÓN: Adopte procedimientos seguros al levantar el equipo. PRECAUCIÓN: El botón de control de alimentación del dispositivo y el interruptor de alimentación de la fuente de alimentación no desconectan la corriente eléctrica suministrada al dispositivo. Además, el dispositivo podría tener más de un cable [...]
-
Página 47
Chapter 3. General information This chapter provides general information that applies to all machine types supported by this publication. The Access IBM program Use the Access IBM ® program for general information about the use, operation, and maintenance of the computer . The Access IBM program also contains information to help solve problems and[...]
-
Página 48
T ypes 8126, 8174, 8175, and 8176 Dimensions Height: 398 mm (15.67 in.) W idth: 180 mm (7.08 in.) Depth: 402 mm (15.82 in.) W eight Minimum configuration as shipped: 7.6 kg (16.8 lb) Maximum configuration: 9.97 kg (22 lb) Environment Air temperature: System on: 10° to 35°C (50° to 95° F) System off: 10° to 43°C (50° to 1 10° F) Maximum alti[...]
-
Página 49
T ypes 8149, 8177, and 8178 Dimensions Height: 140 mm (5.5 in.) W idth: 425 mm (16.7 in.) Depth: 425 mm (16.7 in) W eight Minimum configuration as shipped: 10.0 kg (22 lb) Maximum configuration: 1 1.4 kg (25.0 lb) Environment Air temperature: System on: 10° to 35°C (50° to 95° F) System off: 10° to 43°C (50° to 1 10° F) Maximum altitude: 21[...]
-
Página 50
T ypes 8084, 8085, 8147, 8148, and 8179 Dimensions Height: 413 mm (16.25 in.) W idth: 191 mm (7.5 in.) Depth: 406 mm (16 in.) W eight Minimum configuration as shipped: 9.1 kg (20 lb) Maximum configuration: 1 1.4 kg (25.0 lb) Environment Air temperature: System on: 10° to 35°C (50° to 95° F) System off: 10° to 43°C (50° to 1 10° F) Maximum a[...]
-
Página 51
Chapter 4. General Checkout Attention The drives in the computer you are servicing might have been r earranged or the drive startup sequence changed. Be extremely car eful during write operations such as copying, saving, or formatting. Data or programs can be overwritten if you select an incorrect drive. General error messages appear if a pr oblem [...]
-
Página 52
d. Observe the LEDs and refer to the following table. Power LED Green diagnostic LED Y ellow diagnostic LED Action ON ON OFF This is the normal condition of the LEDs when the power is OK. OFF OFF OFF Make sure the power cor d is attached to a working electrical outlet. If the electrical outlet is OK, replace the power supply . OFF (after the power [...]
-
Página 53
1. Are the exact machine type and models 2. Have the same BIOS level 3. Have the same adapters/attachments in the same locations 4. Have the same address jumpers/terminators/cabling 5. Have the same software versions and levels 6. Have the same Diagnostics Diskette (version) 7. Have the same configuration options set in the system 8. Have the same [...]
-
Página 54
48 Hardwar e Maintenance Manual[...]
-
Página 55
Chapter 5. Diagnostics using PC-Doctor for DOS Diagnostics are pr ovided by the PC-Doctor program for DOS. These include a full range of diagnostic utilities to determine the operating condition of the computer ’s hardwar e components. Yo u can the run diagnostics fr om the Rescue and Recovery ™ workspace or you can create a bootable diagnostic[...]
-
Página 56
Starting PC-Doctor from a diagnostic diskette or CD-ROM Note: If your computer has no internal diskette drive, an external USB diskette drive is requir ed when using the diagnostic diskette. 1. If your computer is already on when you start this procedur e, shut down the operating system and turn off the computer . 2. Insert the diskette or CD-ROM i[...]
-
Página 57
T est selection To select one or more tests, use the following procedur e. 1. Open the corresponding test category . 2. Using the cursor movement keys, highlight the desired test. 3. Press the space bar . A selected test is marked by >> . Pressing the space bar again de-selects a test and removes the >>. 4. Repeat steps 2 and 3 above to[...]
-
Página 58
available for test, what tests are available for the device, device pr operties, and so on. To change testing parameters, you modify the FDA T .INI file in PC Doctor for DOS. FDA T consists of the following subtests and features. Fixed-Disk T ests: v Seek T ests: - checks the physical operation of the drive head. – Linear Seek – Random Seek –[...]
-
Página 59
channel buffer must be kept high in or der to maintain a speed advantage over other data transfer modes. In order to use the UDMA channel during testing, users must disable the multitasking feature. Destructive versus non-destructive testing: Most of the tests found in FDA T are non-destructive. This means that PC-Doctor program will pr eserve any [...]
-
Página 60
The Full Erase Hard Drive pr ovides a DOS utility that performs the following: v Performs all the steps in Quick Erase. v Provides a DOS utility that writes random data to all sectors of the hard drive. v Provides an estimate of time to completion along with a visual repr esentation of completion status. v Provides messages that warn the user about[...]
-
Página 61
Chapter 6. Using the Setup Utility The Setup Utility program is stor ed in the electrically erasable programmable read-only memory (EEPROM) of the computer . The Setup Utility program is used to view and change the configuration settings of the computer , regar dless of which operating system you are using. However , the operating-system settings m[...]
-
Página 62
Password considerations If you are setting any of the various types of passwor ds on your computer , you should read and understand the following information: v If you type an incorrect password, you will see an err or message. If you type an incorrect passwor d three consecutive times, you must turn the computer off and start again. v If you set b[...]
-
Página 63
Attention Make sure that the IDE Drive Master passwor d is stored in a safe place. If both the IDE Drive User password and the IDE Drive Master passwor d are lost or forgotten, the IDE har d disk drive must be replaced. If both the IDE Drive User Password and the IDE Drive Master Passwor d are to be set, the IDE Drive Master Password must be set be[...]
-
Página 64
Selecting a startup device If the computer does not start up (boot) from a device such as the CD-ROM, diskette, or hard disk as expected, use one of the following pr ocedures to select a startup device. Selecting a temporary startup device Use this procedur e to startup from any boot device. Note: Not all CDs, hard disks, and diskettes are startabl[...]
-
Página 65
Chapter 7. Symptom-to-FRU Index The Symptom-to-FRU index lists error symptoms and possible causes. The most likely cause is listed first. Always begin with Chapter 4, “General Checkout,” on page 45. This index can also be used to help you decide which FRUs to have available when servicing a computer . If you are unable to corr ect the problem u[...]
-
Página 66
1. T urn off the computer and disconnect all external devices. 2. Power-on the computer . 3. There are thr ee LEDs to help you determine if the power supply and system board ar e working correctly . The power button LED is located on the front of the computer and the two diagnostic LEDs are located on the power supply at the rear of the computer . [...]
-
Página 67
Diagnostic error codes Refer to the following diagnostic error codes when using the diagnostic tests. See “Running diagnostics tests” on page 50 for the specific type for information about the Diagnostic programs. In the following index, X can repr esent any number . Diagnostic Error Code FRU/Action 000-000-XXX BIOS T est Passed No action 000-0[...]
-
Página 68
Diagnostic Error Code FRU/Action 000-039-XXX BIOS DMI data error 1. Flash the system. See “Flash update procedures” on page 214 2. System board 000-195-XXX BIOS T est aborted by user Information only Re-start the test, if necessary 000-196-XXX BIOS test halt, error thr eshold exceeded 1. Press F3 to review the log file 2. Re-start the test to r[...]
-
Página 69
Diagnostic Error Code FRU/Action 001-027-XXX System Configuration/Setup error 1. Run Setup 2. Flash the system. See “Flash update procedur es” on page 214 3. System board 001-032-XXX System Device Controller failur e System board 001-034-XXX System Device Buffer Allocation failur e 1. Reboot the system 2. Flash the system. See “Flash update p[...]
-
Página 70
Diagnostic Error Code FRU/Action 001-199-XXX System test failed, cause unknown 1. Go to “Undetermined problems” on page 90 2. Flash the system and re-test 3. Replace component under function test 001-250-XXX System ECC error System board 001-254-XXX 001-255-XXX 001-256-XXX 001-257-XXX System DMA error System board 001-260-XXX 001-264-XXX System[...]
-
Página 71
Diagnostic Error Code FRU/Action 001-281-XXX System IRQ14 (hard disk drive) failur e 1. Hard disk drive cable 2. Hard disk drive 3. System board 001-282-XXX System IRQ15 failure 1. Device on IRQ15 2. System board 001-286-XXX 001-287-XXX 001-288-XXX System T imer failure System board 001-292-XXX System CMOS RAM error 1. Run Setup and re-test 2. Syst[...]
-
Página 72
Diagnostic Error Code FRU/Action 005-031-XXX V ideo Device Cable failure 1. V ideo cable 2. Monitor 3. V ideo card, if installed 4. System board 005-032-XXX V ideo Device Controller failur e 1. V ideo card, if installed 2. System board 005-036-XXX V ideo Register error 1. V ideo card, if installed 2. System board 005-038-XXX System BIOS extension f[...]
-
Página 73
Diagnostic Error Code FRU/Action 006-195-XXX Diskette interface T est aborted by user Information only Re-start the test, if necessary 006-196-XXX Diskette interface test halt, error thr eshold exceeded 1. Press F3 to review the log file 2. Re-start the test to reset the log file 006-197-XXX Diskette interface test warning 1. If a component is call[...]
-
Página 74
Diagnostic Error Code FRU/Action 01 1-195-XXX Serial port T est aborted by user Information only Re-start the test, if necessary 01 1-196-XXX Serial port test halt, error thr eshold exceeded 1. Press F3 to review the log file 2. Re-start the test to reset the log file 01 1-197-XXX Serial port test warning 1. Make sure the component that is called o[...]
-
Página 75
Diagnostic Error Code FRU/Action 014-03X-XXX 014-04X-XXX Parallel port failure System board 014-195-XXX Parallel port T est aborted by user Information only Re-start the test, if necessary 014-196-XXX Parallel port test halt, error thr eshold exceeded 1. Press F3 to review the log file 2. Re-start the test to reset the log file 014-197-XXX Parallel[...]
-
Página 76
Diagnostic Error Code FRU/Action 015-034-XXX USB port buffer allocation failure 1. Reboot the system 2. Flash the system and re-test. See “Flash update procedur es” on page 214 3. Run memory test 4. System board 015-035-XXX USB port Reset condition detected 1. Remove USB device(s) and re-test 2. System board 015-036-XXX USB port Register error [...]
-
Página 77
Diagnostic Error Code FRU/Action 018-196-XXX PCI Card test halt, err or threshold exceeded 1. Press F3 to review the log file 2. Re-start the test to reset the log file 018-197-XXX PCI Card test warning 1. Make sure the component that is called out is connected and/or enabled. See Chapter 6, “Using the Setup Utility,” on page 55 2. Re-run test [...]
-
Página 78
Diagnostic Error Code FRU/Action 020-198-XXX PCI test aborted 1. If a component is called out, make sure it is connected and/or enabled. See Chapter 6, “Using the Setup Utility,” on page 55 2. Flash the system and re-test. See “Flash update procedur es” on page 214 3. Go to “Undetermined problems” on page 90 020-199-XXX PCI test failed,[...]
-
Página 79
Diagnostic Error Code FRU/Action 025-198-XXX IDE interface test aborted 1. If a component is called out, make sure it is connected and/or enabled. See Chapter 6, “Using the Setup Utility,” on page 55 2. Flash the system and re-test. See “Flash update procedur es” on page 214 3. Go to “Undetermined problems” on page 90 025-199-XXX IDE in[...]
-
Página 80
Diagnostic Error Code FRU/Action 030-198-XXX SCSI interface test aborted 1. If a component is called out, make sure it is connected and/or enabled. See Chapter 6, “Using the Setup Utility,” on page 55 2. Flash the system and re-test. See “Flash update procedur es” on page 214 3. Go to “Undetermined problems” on page 90 030-199-XXX SCSI [...]
-
Página 81
Diagnostic Error Code FRU/Action 071-00X-XXX 071-01X-XXX 071-02X-XXX Audio port error 1. Run Setup 2. Flash the system. See “Flash update procedur es” on page 214 3. System board 071-03X-XXX Audio port failure 1. Speakers 2. Microphone 3. Audio card, if installed 4. System board 071-04X-XXX Audio port failure 1. Run Setup 2. Audio card, if inst[...]
-
Página 82
Diagnostic Error Code FRU/Action 080-196-XXX Game Port interface test halt, error thr eshold exceeded 1. Press F3 to review the log file 2. Re-start the test to reset the log file 080-197-XXX Game Port interface test warning 1. Make sure the component that is called out is connected and/or enabled. See Chapter 6, “Using the Setup Utility,” on p[...]
-
Página 83
Diagnostic Error Code FRU/Action 086-197-XXX Mouse Port interface test warning 1. Make sure the component that is called out is connected and/or enabled. See Chapter 6, “Using the Setup Utility,” on page 55 2. Re-run test 3. Replace the component that is called out in warning statement 4. Replace the component under test 086-198-XXX Mouse Port [...]
-
Página 84
Diagnostic Error Code FRU/Action 170-0XX-XXX V oltage Sensor(s) failure 1. Flash system 2. System board 170-195-XXX V oltage Sensor(s) T est aborted by user Information only Re-start the test, if necessary 170-196-XXX V oltage Sensor(s) test halt, error threshold exceeded 1. Press F3 to review the log file 2. Re-start the test to reset the log file[...]
-
Página 85
Diagnostic Error Code FRU/Action 175-197-XXX Thermal Sensor(s) test warning 1. Make sure the component that is called out is connected and/or enabled. See Chapter 6, “Using the Setup Utility,” on page 55 2. Re-run test 3. Replace the component that is called out in warning statement 4. Replace the component under test 175-198-XXX Thermal Sensor[...]
-
Página 86
Diagnostic Error Code FRU/Action 215-000-XXX CD-ROM Drive T est Passed No action 215-XXX-XXX CD-ROM Drive error 1. CD-ROM Drive Cable 2. Check power supply voltages 3. CD-ROM drive 4. System board 217-000-XXX Hard Disk Drive T est Passed No action 217-25X-XXX 217-26X-XXX Hard Disk Drive (IDE) err or 1. Hard Disk Drive Cable 2. Check power supply vo[...]
-
Página 87
Diagnostic Error Code FRU/Action 415-000-XXX Modem T est Passed No action 415-XXX-XXX Modem error Remove the Modem and re-test the system Chapter 7. Symptom-to-FRU Index 81[...]
-
Página 88
Beep symptoms Beep symptoms are short tones or a series of short tones separated by pauses (intervals without sound). See the following examples. Beeps Description 1-2-X v One beep v A pause (or break) v Tw o beeps v A pause (or break) v Any number of breaks 4 Four continuous beeps Use the following table to diagnose beep symptoms. Beep Symptom FRU[...]
-
Página 89
Beep Symptom FRU/Action 2-2-4 CMOS configuration info validation failed 1. Battery 2. System Board 2-3-1 Screen initialization failed 1. Jumper on J28 2. System Board 2-3-2 Screen memory failed System board 2-3-3 Screen r etrace failed System board 1-2 Search for video ROM failed System board All other beep code sequences System board Continuous be[...]
-
Página 90
No-beep symptoms Symptom/Error FRU/Action No beep during POST but computer works correctly . System board No beep during POST . 1. See “Undetermined problems” on page 90. 2. System Board 3. Memory Module 4. Any Adapter or Device 5. Riser Card 6. Power Cord 7. Power Supply 84 Hardwar e Maintenance Manual[...]
-
Página 91
POST error codes Each time you power-on the system, it performs a series of tests that check the operation of the system and some options. This series of tests is called the Power-On Self-T est , or POST . POST does the following operations. v Checks some basic system-board operations v Checks the memory operation v Starts the video operation v V e[...]
-
Página 92
POST Error Code FRU/Action 191 System Security: Embedded Security hardwar e Reset If problem persists, r eplace the system board 192 System Security: Embedded Security hardwar e tamper detected If problem persists, r eplace the system board 193 System Security: Embedded Security hardwar e Removed If problem persists, r eplace the system board 194 S[...]
-
Página 93
POST Error Code FRU/Action 1801 PCI/PnP Error! No Space A vailable to Shadow ROM 1. Run Setup and verify PCI/ISA configuration settings. 2. Run diagnostics. 3. Replace PCI Adapter 1802 PCI/PnP Error! Not Enough I/O Space A vailable 1. Run Setup and verify PCI/ISA configuration settings. 2. Run diagnostics. 3. Replace PCI Adapter 1803 PCI/PnP Error![...]
-
Página 94
Miscellaneous error messages Message/Symptom FRU/Action CMOS Backup Battery inaccurate 1. CMOS Backup Battery (see Chapter 2, “Safety information,” on page 5) 2. System Board Changing colors Display/Monitor Computer will not power-of f. See “Power Supply Errors” on page 59. 1. Power Switch 2. System Board 3. Riser card Computer will not RPL[...]
-
Página 95
Message/Symptom FRU/Action ″ Insert a Diskette ″ icon appears with a known-good diagnostics diskette in the first 3.5-inch diskette drive. 1. System Board 2. Diskette Drive Cable 3. Riser card 4. Network Adapter Intensity or color varies from left to right of characters and color bars 1. Display 2. System Board No power or fan not running 1. Se[...]
-
Página 96
Message/Symptom FRU/Action Some or all keys on the keyboard do not work 1. Keyboard 2. Keyboard Cable 3. System Board Undetermined problems Check the power supply voltages (see “Power Supply Errors” on page 59). If the voltages are corr ect, return here and continue with the following steps. 1. Power-off the computer . 2. Remove or disconnect t[...]
-
Página 97
Chapter 8. Replacing FRUs (T ypes 8126, 8174, 8175, and 8176) Important Before you r eplace any FRU, read Chapter 2, “Safety information,” on page 5. These precautions and guidelines will help you work safely . FRU replacements ar e to be done by trained service technicians only . This chapter does not contain a remove and r eplace procedure fo[...]
-
Página 98
Locating the connectors on the rear The following illustration shows the locations of the connectors on the rear of the computer . 1 Power connector 8 USB connectors 2 Mouse connector 9 Ethernet connector 3 Keyboard connector 10 Microphone connector 4 USB connectors 11 Audio line out connector 5[...]
-
Página 99
Chapter 8. Replacing FRUs (T ypes 8126, 8174, 8175, and 8176) 93[...]
-
Página 100
Locating components The following illustration will help you locate the various components in the computer . 1 Micropr ocessor and heat sink 4 PCI slots 2 DIMMs 5 PCI adapter 3 AGP slot (some models) 6 Power supply 94 Hardwar e Maintenance Manual[...]
-
Página 101
Identifying parts on the system board 1 Micropr ocessor 9 Secondary IDE connector 2 DIMM connector 1 10 S ATA 1 connector 3 DIMM connector 2 11 S ATA 2 connector 4 DIMM connector 3 12 Power switch/LEDs connector 5 DIMM connector 4 13 Clear CMOS/Recovery jumper 6 Power connector 14[...]
-
Página 102
Removing and replacing memory 1. Remove the cover . See “Removing the cover” on page 92. 2. To locate the DIMM connectors. See “Identifying parts on the system board” on page 95. 3. Open the retaining clips and remove the failing DIMM. 4. Make sure the notch 1 on the new DIMM is aligned correctly with the connector key 2 on the [...]
-
Página 103
6. Secure the adapter with the screw as shown. 7. Go to “Closing the cover and connecting cables” on page 104. Removing and replacing the battery 1. Remove the cover . See “Removing the cover” on page 92. 2. Locate the battery . See “Identifying parts on the system board” on page 95. 3. If necessary , remove any adapters that impede acc[...]
-
Página 104
Removing and replacing the power supply Attention Never remove the cover on a power supply or any part that has the following label attached. Hazardous voltage, curr ent, and energy levels are pr esent inside any component that has this label attached. There ar e no servicable parts inside these components. 1. Remove the cover . See “Removing the[...]
-
Página 105
Removing and replacing the system board 1. Remove the cover . See “Removing the cover” on page 92. 2. Remove any PCI adapters installed. See “Removing and replacing a PCI adapter” on page 96. 3. Remove any air baffles or ducts. 4. Carefully take note of the location of all cable connections on the system board. It will be necessary to r eco[...]
-
Página 106
4. Loosen the two captured screws 3 holding the fan and heat sink 1 in place, and pivot them to the side. 5. To remove the fan and heat sink from the micr oprocessor 2 , gently twist the fan and heat sink to break the seal formed by the thermal gr ease and remove. Note: If the thermal grease seal cannot be broken, you may want to [...]
-
Página 107
Microprocessor 0.01 mL of thermal grease 14. Place the fan and heat sink into position on the microprocessor . 15. When tightening the screws that clamp the heat sink, do not overtighten. T ighten the clamp screws evenly by tightening one side some and then the other until they are both snug. 16. Reconnect the fan to the system board connector . 17[...]
-
Página 108
3. Disconnect the signal and power cables from the failing drive. Note: T ake note of the location of any cables you disconnect. Yo u might have to disconnect cables to other drives to gain access to the drive you are removing. 4. Remove the screws that secure the drive being r emoved. Note: The hard disk drive has four screws; two at the side of t[...]
-
Página 109
Note: This illustration shows the hard disk drive being removed. All drives are r emoved in the same manner . However , it is only necessary to remove the fr ont bezel when removing the hard disk drive or diskette drive. 7. Make sure the drive that you are installing is set corr ectly as either a master or a slave device. Jumper the new drive the s[...]
-
Página 110
Note: This illustration shows a CD drive installation. The hard disk drive and diskette drive is installed in the same manner except that the front bezel is not in place. 9. If installing the hard disk drive, replace the cover on the fr ont of the drive. 10. If the front bezel was removed, r eplace it by aligning the four plastic tabs and pressing [...]
-
Página 111
Chapter 9. Replacing FRUs (T ypes 8149, 8177, and 8178) Important Before you r eplace any FRU, read Chapter 2, “Safety information,” on page 5. These precautions and guidelines will help you work safely . FRU replacements ar e to be done by trained service technicians only . This chapter does not contain a remove and r eplace procedure for all [...]
-
Página 112
Locating connectors on the rear 1 Power connector 8 Audio line out connector 2 Mouse connector 9 Microphone connector 3 Parallel connector 10 USB connectors 4 Ethernet connector 11 VGA monitor connector 5 Audio line in connector 12 Serial connector 6 PCI slots 13 USB connectors[...]
-
Página 113
Locating components 1 CD drive or DVD drive 7 DIMMs 2 USB connector 8 Micropr ocessor and heat sink 3 USB connector 9 AGP slot (some models) 4 Optional drive bay 10 Battery 5 Hard disk drive 11 PCI slots 6 Diskette drive Chapter 9. Replacing FRUs (T ypes 8149, 8177, and 8178) 107[...]
-
Página 114
Identifying parts on the system board 1 Micropr ocessor 9 Secondary IDE connector 2 DIMM connector 1 10 S ATA 1 connector 3 DIMM connector 2 11 S ATA 2 connector 4 DIMM connector 3 12 Power switch/LEDs connector 5 DIMM connector 4 13 Clear CMOS/Recovery jumper 6 Power connector 14[...]
-
Página 115
Removing and replacing memory 1. Remove the cover . See “Removing the cover” on page 106. 2. To locate the DIMM connectors. See “Identifying parts on the system board” on page 108. 3. Open the retaining clips and remove the failing DIMM. 4. Make sure the notch 1 on the new DIMM is aligned correctly with the connector key 2 on th[...]
-
Página 116
Removing and replacing a PCI adapter 1. Remove the cover . See “Removing the cover” on page 106. 2. Open and remove the adapter-slot-cover latch and r emove the failing adapter . 3. Remove the new adapter from its static-protective package. 4. Install the new adapter into the appropriate slot on the system board. 5. Install and close the adapte[...]
-
Página 117
5. Install the new battery . 6. Replace any adapters that were removed to gain access to the battery . 7. Go to “Installing the cover and connecting cables” on page 1 16. Note: Use the Setup Utility program to set the date and time and any passwords. See Chapter 6, “Using the Setup Utility,” on page 55. Removing and replacing the power supp[...]
-
Página 118
5. Install the new power supply and insert the four screws that hold the power supply in place. 6. Reconnect all power supply cables to the system board and the drives. See “Identifying parts on the system board” on page 108. 7. Go to “Installing the cover and connecting cables” on page 1 16. Removing and replacing the system board 1. Remov[...]
-
Página 119
micropr ocessor.” Continue to the next step after installing the heat sink and micropr ocessor on the new system board. 8. Install the new system board into the chassis and insert the screws. 9. Reconnect all cables to the system board. See “Identifying parts on the system board” on page 108. 10. Go to “Installing the cover and connecting c[...]
-
Página 120
11 . Lower the handle until it is fully in the down position and locked into the socket. This secures the micr oprocessor in the socket. 12. Remove the cleaning pad from its package and use the cleaning pad to wipe the thermal grease fr om the bottom of the heat sink. Notes: a. The cleaning pad and thermal grease are separate FRUs and ar e not incl[...]
-
Página 121
3. Disconnect the signal cable and power supply cable from the drive being replaced. 4. Remove any screws that secure the drive. Not all drives have scr ews. 5. Make sure the drive that you are installing is set corr ectly as either a master or a slave device. Jumper the new drive the same as the drive being replaced. Note: If you are installing a [...]
-
Página 122
7. Secure the new drive (if necessary) with the screws that wer e removed. 8. If necessary , place the drive-bay cages back into the chassis. 9. Go to “Installing the cover and connecting cables.” Installing the cover and connecting cables After replacing FRUs, you need to install any r emoved parts, replace the cover , and reconnect cables, in[...]
-
Página 123
5. Reconnect the external cables and power cords to the computer . 6. To update the configuration, see Chapter 6, “Using the Setup Utility,” on page 55. Chapter 9. Replacing FRUs (T ypes 8149, 8177, and 8178) 11 7[...]
-
Página 124
11 8 Hardwar e Maintenance Manual[...]
-
Página 125
Chapter 10. Replacing FRUs (T ypes 8084, 8085, 8147, 8148, and 8179 Important: Before you r eplace any FRU, read Chapter 2, “Safety information,” on page 5. These precautions and guidelines will help you work safely . FRU replacements ar e to be done by trained service technicians only . This chapter does not contain a remove and r eplace proce[...]
-
Página 126
Locating connectors on the front The following illustration shows the locations of the connectors on the front of the computer . 1 Microphone connector 3 USB connector 2 Headphone connector 4 USB connector 120 Hardwar e Maintenance Manual[...]
-
Página 127
Locating the connectors on the rear 1 Power connector 8 USB connectors 2 Mouse connector 9 Ethernet connector 3 Keyboard connector 10 Micr ophone connector 4 USB connectors 11 Audio line out connector 5 Serial connector 12 Audio line in connector 6 Parallel connector 13 AGP slo[...]
-
Página 128
122 Hardwar e Maintenance Manual[...]
-
Página 129
Locating components The following illustration will help you locate the various components in the computer . 1 Micropr ocessor and heat sink 2 DIMMs 3 AGP slot (some models) 4 PCI adapter 5 Power supply Chapter 10. Replacing FRUs (T ypes 8084, 8085, 8147, 8148, and 8179 123[...]
-
Página 130
Identifying parts on the system board 1 Micropr ocessor 9 Secondary IDE connector 2 DIMM connector 1 10 S ATA 1 connector 3 DIMM connector 2 11 S ATA 2 connector 4 DIMM connector 3 12 Power switch/LEDs connector 5 DIMM connector 4 13 Clear CMOS/Recovery jumper 6 Power connector 14[...]
-
Página 131
Removing and replacing memory 1. Remove the cover . See “Removing the cover” on page 121. 2. To locate the DIMM connectors. See “Identifying parts on the system board” on page 124. 3. Open the retaining clips and remove the failing DIMM. 4. Make sure the notch 1 on the new DIMM is aligned correctly with the connector key 2 on th[...]
-
Página 132
2. Open the adapter-slot-latch securing the adapter and remove the failing adapter . 3. Remove the new adapter from its static-protective package. 4. Install the new adapter into the appropriate slot on the system board and secure the adapter with the adapter -slot-latch. 5. Go to “Closing the cover and connecting cables” on page 133. 126 Hardw[...]
-
Página 133
Removing and replacing the battery 1. Remove the cover . See “Removing the cover” on page 121. 2. Locate the battery . See “Identifying parts on the system board” on page 124. 3. If necessary , remove any adapters that impede access to the battery . See “Removing and replacing a PCI adapter” on page 125 for mor e information. 4. Remove [...]
-
Página 134
6. Install the new power supply and insert the four screws that hold the power supply in place. 7. Reconnect all power supply cables to the system board and the drives. See “Identifying parts on the system board” on page 124. 8. Go to “Closing the cover and connecting cables” on page 133. Removing and replacing the system board 1. Remove th[...]
-
Página 135
7. T ake note of the location of the DIMMs and remove them fr om the failing system board and install them on the new system boar d in the same location as they were on the failing system boar d. See “Removing and replacing memory” on page 125. 8. Remove the heat sink and microprocessor fr om the failing system board and install them on the new[...]
-
Página 136
4. Loosen the two captured screws 3 holding the fan and heat sink in place, and pivot them to the side. 5. To remove the fan and heat sink 1 from the micr oprocessor 2 , gently twist the fan and heat sink to break the seal formed by the thermal gr ease and remove. Note: If the thermal grease seal cannot be broken, you may want to [...]
-
Página 137
13. Use the thermal grease syringe to place 16 uniformly spaced dots of 0.01ML each on the top of the micropr ocessor . Microprocessor 0.01 mL of thermal grease 14. Place the fan and heat sink into position on the microprocessor . 15. When tightening the screws that clamp the heat sink, do not overtighten. T ighten the clamp screws evenly by tighte[...]
-
Página 138
5. For all drives except the hard disk drive, push in on the metal tab that secures the drive being removed. The har d disk drive tray pivots out toward the front of the computer for removal of the har d disk drive. See the following illustrations. For the hard disk drive, see the illustration below . 6. Slide the drive out the front of the compute[...]
-
Página 139
10. For bay 5 (hard disk drive), pivot the drive cage to the closed position. 11 . If the front bezel was removed, r eplace it by aligning and pressing the bezel into position. 12. Go to “Closing the cover and connecting cables.” Closing the cover and connecting cables After replacing FRUs, you need to install any r emoved parts, replace the co[...]
-
Página 140
134 Hardwar e Maintenance Manual[...]
-
Página 141
Chapter 11 . FRU lists Note: A CRU (Customer Replaceable Unit) is identified by a single asterisk (*) or two asterisks (**) in the CRU ID column. An N in the CRU ID Column means that the part is not a CRU. A single asterisk (*) means that the part is a T ier 1 CRU; two asterisks (**) mean that the part is a T ier 2 CRU. Machine T ype 8084 Item # 80[...]
-
Página 142
Item # 8084 FRUs FRU# CRU 5 CD-ROM Drive 48X (Black) - w/o volume ctrl and headphone jack (models 17S 23S 1BS 1AU 11 U 12G 21G 24U A3G B1G B2G D4G E3G 41U 15G 18G 1CG 1DC 1EC 1FU 26G 31U 31G 73G 75G 76G 77G 78G 79G 7AG 7DG B2S D4S A4J E6G 33G 51G 53U 7KG 7NG 7PG D7U EAS 2AU 36U 37S EBG 7UG 7VG) 40Y8801 * 5 CD-ROM Drive 48X (Black) - w/o[...]
-
Página 143
Item # 8084 FRUs FRU# CRU 7 Hard disk drive, 40GB EIDE (models D1S 1AU A1U A1F A2U A2F D2U D2F E1U E1F E2U E2F 11 U 12G 13U 13F 14U 14F 21G 24U 25U 25F A3G B1G B2G D2U D2F D3U D3F D4G E3G 41U 15G 16G 18G 1CG 1DC 1EC 1FU 26G 27U 27F 31U 31G 73G 75G 76G 77G 78G 79G 7AG 7DG 1GU B2S B3U B3F B4U B4F D4S D5U D5F D6U D6F E4U E4F E5U E5F 1HU 1HF 1JU [...]
-
Página 144
Item # 8084 FRUs FRU# CRU 10 Intel Celeron 2.6 GHz (models CT O-U CTO-G D1S D2U D2F D2U D2F D3U D3F C2U) 13R8907 * * 10 Intel Celeron 2.7 GHz (models CT O-U CTO-G) 13R8947 * * 10 Intel Celeron 2.8 GHz (models CT O-U CTO-G E1U E1F E2U E2F) 13R8963 * * 10 Intel Prescott Celer on 2.4 GHz (models A4J) 19R0780 * * 10 Intel [...]
-
Página 145
Item # 8084 FRUs FRU# CRU 11 Heat sink and fan, Northwood >=3.0 GHZ and all Prescott, Dual Heat Pipe -- optional to 13R9195 (models 17S 23S 21G 24U 15G 16G 1CG 1DC 73G 74G 7AG 18G 19G 1EC 7BG C5U 31U 31G 32G 7EG C7U 1GU B1G B2G 76G D4G 77G E3G 78G C3U 1HU 1HF 1JU 1JF 28U 28F 29U 29F 7JG 7GG 7HG B2S B3U B3F B4U B4F D4S D5U D5F D6U D6F E4U E[...]
-
Página 146
8084 FRUs FRU# CRU Mouse, optical wheel (models 17S 23S D1S 1BS 1AU 11 U 21G 24U 41U 15G 19G 1DC 1EC 1FU 22G 31U 31G 32G 73G 74G 7BG 7CG 7EG A3G B1G B2G D4G E3G 12G 16G 18G 1CG 26G 72G 75G 76G 77G 78G 79G 7AG 7DG 1GU B2S D4S 7GG 7HG 7JG A4J E6G 33G 51G 52G 53U 7KG 7NG 7PG 7QG D7U EAS 2AU 36U 37S EBG 7RG 7SG 7TG 7UG 7VG) 89P5089 * Cable clip (all mo[...]
-
Página 147
8084 W indows XP Pro Recovery CDs FRU# CRU IT (models 12G 21G A3G B1G D4G E3G 15G 16G 18G 19G 1CG 22G 26G 31G 32G 72G 74G 75G 76G 77G 78G 79G 7AG 7BG 7CG 7DG 7EG 7GG 7HG 7JG E6G 33G 51G 52G 7KG 7NG 7PG 7QG EBG 7RG 7SG 7TG) 39J6418 * SV (models 12G 21G A3G B1G D4G E3G 15G 16G 18G 19G 1CG 22G 26G 31G 32G 72G 74G 75G 76G 77G 78G 79G 7AG 7BG 7CG 7DG 7E[...]
-
Página 148
8084 W indows XP Pro Recovery CDs FRU# CRU JP (models A4J) 30R4834 * CS (models 1EC) 30R4813 * Multilingual 1 (models 12G 21G A3G B1G D4G E3G 15G 16G 18G 19G 1CG 22G 26G 31G 32G 72G 74G 75G 76G 77G 78G 79G 7AG 7BG 7CG 7DG 7EG 7GG 7HG 7JG E6G 33G 51G 52G 7KG 7NG 7PG 7QG EBG 7RG 7SG 7TG) 39J7221 * Multilingual 2 (models 12G 21G A3G B1G D4G E3G 15G 16[...]
-
Página 149
8084 Keyboards (Standard PS/2 Black) FRU# CRU Hebrew (models 21G A3G B1G B2G D4G E3G 15G 16G 18G 19G 1CG 22G 26G 31G 32G 72G 73G 74G 75G 76G 77G 78G 79G 7AG 7BG 7CG 7DG 7EG 7GG 7HG 7JG E6G 33G 51G 52G 7KG 7NG 7PG 7QG EBG 7RG 7SG 7TG 7UG 7VG) 89P8315 * Hungarian (models 21G A3G B1G B2G D4G E3G 15G 16G 18G 19G 1CG 22G 26G 31G 32G 72G 73G 74G 75G 76G [...]
-
Página 150
8084 Keyboards (Standard PS/2 Black) FRU# CRU T urkish (models 21G A3G B1G B2G D4G E3G 15G 16G 18G 19G 1CG 22G 26G 31G 32G 72G 73G 74G 75G 76G 77G 78G 79G 7AG 7BG 7CG 7DG 7EG 7GG 7HG 7JG E6G 33G 51G 52G 7KG 7NG 7PG 7QG EBG 7RG 7SG 7TG 7UG 7VG) 89P8335 * T urkish (models 21G A3G B1G B2G D4G E3G 15G 16G 18G 19G 1CG 22G 26G 31G 32G 72G 73G 74G 75G 76G[...]
-
Página 151
Machine T ype 8085 Item # 8085 FRUs FRU# CRU 1 Side cover assembly (all models) 59P8547 ** 2 ″ L ″ Cover assembly (all models) 59P8546 ** 3 Front Bezel assembly (all models) 59P8544 ** 4 Bezel trim/label kit (all models) 49P1900 ** 5 CD-ROM Drive 48X (Black) - w/o volume ctrl and headphone jack (models A1U 15U 15F [...]
-
Página 152
Item # 8085 FRUs FRU# CRU 5 CD-ROM Drive 48X (Black) - w/o volume ctrl and headphone jack (models A1U 15U 15F 15G 33U 33F D2U 41U 11 U 13G 19U 21U 21F 21G 35G A4U A5S A5D A5Y B1U B2S B2D B2Y 7DG 1DU 1DF 51U 51F 51G A6J A7J A8J B4J B5J B6J 1GJ 2BJ E5J E6J E7J E9J EAJ EBJ) 71P7371 * 5 DVD-ROM 16X/48X (Black) (models 34S 34D 34Y 32U D3U 16[...]
-
Página 153
Item # 8085 FRUs FRU# CRU 8 System board, 10/100 E-net (models 34S 34D 34Y 14S 14D 14Y 17S 17D 17Y 24S 24D 24Y 27S 27D 27Y 15U 15F 15G 23U 24U 31U 32U 33U 33F 13G 16G 18U 21U 21F 21G 22G 35G 36G 71G 72G 73G 74G 75G 76G 77G 78G 79G 7AG 7BG 7CG C4U C5U C6U C7U 7DG 1DU 1DF 28U 37U 51U 51F 51G 52G 53U 7EG 7FG 7GG 7HG CDU 1FJ 1GJ 1EJ 29J 2AJ 2BJ 1[...]
-
Página 154
Item # 8085 FRUs FRU# CRU 10 Intel P4 2.6 GHz (models 41U 42U 42S 42D 42Y) 73P0574 * * 10 Intel P4 2.8 GHz (models 19U 1AU 1AS 1AD 1A Y) 19R2302 * * 10 Intel P4 2.8 GHz (models 11 U C4U) 74P1631 * * 10 Intel P4 3.06 GHz (models 27S 27D 27Y) 74P1633 * * 10 Intel P4 2.8 GHz (models 14S 14D 14Y 13G 1BU 7DG 1CU 1DU 1DF 1EJ[...]
-
Página 155
8085 FRUs FRU# CRU PCMCIA Asm (all models) 59P8587 ** 1394 (6-pin) Cable (models 73G 76G 7BG) 25P0084 ** Universal adapter bracket (all models) 32P4743 ** Bezel blanks kit (all models) 25P0068 ** 80 mm fan assembly (models with 3.06 GHz micropr ocessor or greater) 22P4447 ** 2 audio front panel (models 34S 34D 34Y 24U 24S 24D 24Y 31U 32U A2S A2D A2[...]
-
Página 156
8085 FRUs FRU# CRU Misc. hardwar e kit (all models) 09N5764 ** Soft modem V .92/V .44 (models 34S 34D 34Y A2S A2D A2Y D1S D1D D1Y E3S E3D E3Y 14S 14D 14Y 17S 17D 17Y 24S 24D 24Y 27S 27D 27Y 23U 24U 31U 32U A3U D3U D4S D4D D4Y E1U 42U 42S 42D 42Y 18U 1AU 1AS 1AD 1A Y 1BU 73G 76G 7BG A5S A5D A5Y B2S B2D B2Y D5U B3U E4G 1CU 28U 37U 53U 7GG E8S 38S) 22[...]
-
Página 157
8085 W indows XP Home Recovery CDs FRU# CRU HU (models E4G) 39J6267 * CZ (models E4G) 39J6263 * TR (models E4G) 39J6266 * GK (models E4G) 39J6269 * JP (models A7J A8J B5J B6J 1FJ 1GJ 2AJ 2BJ E6J E7J 1HJ E9J EAJ EBJ) 30R4798 * 8085 W indows XP Pro Recovery CDs FRU# CRU US (Models 15U 15G 33U 13G 16G 21U 21G 22G 35G 36G 71G 72G 73G 74G 75G 76G 77G 78[...]
-
Página 158
8085 W indows XP Pro Recovery CDs FRU# CRU SL (models 15G 13G 16G 21G 22G 35G 36G 71G 72G 73G 74G 75G 76G 77G 78G 79G 7AG 7BG 7CG 7DG 51G 52G 7EG 7FG 7GG 7HG) 39J6434 * JP (models A6J B4J 1EJ 29J E5J E9J) 30R4834 * Multilingual 1 (models 15G 13G 16G 21G 22G 35G 36G 71G 72G 73G 74G 75G 76G 77G 78G 79G 7AG 7BG 7CG 7DG 51G 52G 7EG 7FG 7GG 7HG) 39J7221[...]
-
Página 159
8085 Keyboard (Preferred Pro Fullsize, PS/2, Stealth Black) FRU# CRU Japan (models A6J A7J A8J B4J B5J B6J 1EJ 1FJ 1GJ 29J 2AJ 2BJ E5J E6J E7J 1HJ E9J EAJ EBJ) 89P8320 * LA Spanish (models 34S 34D 34Y A2S A2D A2Y D1S D1D D1Y E3S E3D E3Y 14S 14D 14Y 17S 17D 17Y 24S 24D 24Y 27S 27D 27Y D4S D4D D4Y 42S 42D 42Y 1AS 1AD 1A Y A5S A5D A5Y B2S B2D B2Y E8S [...]
-
Página 160
8085 Power Cords FRU# CRU Power Cord (EMEA, ANZ, ASEAN Eng, Kor ea) (models15G 13G 16G 21G 22G 35G 36G 71G 72G 73G 74G 75G 76G 77G 78G 79G 7AG 7BG 7CG 7DG E4G 51G 52G 7EG 7FG 7GG 7HG) 13F9978 * Power Cord (EMEA, ANZ, ASEAN Eng, HK Eng) (models15G 13G 16G 21G 22G 35G 36G 71G 72G 73G 74G 75G 76G 77G 78G 79G 7AG 7BG 7CG 7DG E4G 51G 52G 7EG 7FG 7GG 7HG[...]
-
Página 161
Machine T ype 8126 1 2 3 4 5 6 7 8 9 10 11 Item # 8126 FRUs FRU# CRU 1 Chassis assembly (all models) 74P2256 N 2 Bezel and shield kit (all models) 74P2257 * 3 CD-ROM Drive 48X - Black w/o jack & vol (models 41C 11 C D3A D3Q D3T D4V E1A E1Q E1T E2A E2Q E2T 12V 13A 13Q 13T 21A 21Q 21T 31A 31Q 31T) 40Y8801 ** 3 CD-ROM Drive 48X - Black w/o jack &a[...]
-
Página 162
Item # 8126 FRUs FRU# CRU 4 Diskette drive, 3.5 1.44 MB (models D1C D2C A1C A2C D3A D3Q D3T D4V E1A E1Q E1T E2A E2Q E2T 12V 13A 13Q 13T 21A 21Q 21T 31A 31Q 31T) 40Y9107 ** 4 Diskette drive, 3.5 1.44 MB (models D1C D2C A1C A2C D3A D3Q D3T D4V E1A E1Q E1T E2A E2Q E2T 12V 13A 13Q 13T 21A 21Q 21T 31A 31Q 31T) 40Y8899 ** 4 Diskette drive, 3.5 1.44 MB (m[...]
-
Página 163
Item # 8126 FRUs FRU# CRU 10 Heat sink and fan, Northwood >=3.0 GHZ and all Prescott, Dual Heat Pipe -- optional to 13R9195 (models A1C A2C D3A D3Q D3T D4V 12V 21A 21Q 21T 31A 31Q 31T) 13N2951 * 11 230W Power Supply (models D3A D3T E1A E1T E2A E2T 13A 13T 21A 21T 31A 31T) 74P4300 N 11 230W Power Supply - AcBel China version (models D1C D2C 41C 1[...]
-
Página 164
The FRUs listed in the following table are not illustrated. 8126 FRUs FRU# CRU Cable, Diskette drive (all models) 59P8568 ** Cable, audio (all models) 75H9219 ** Cable, IDE (A T A66 1 drop) (all models) 37L4525 ** Cable, IDE (A T A66 2 drop) (all models) 37L5098 ** Dual USB 1.1 cable (top channel) (all models) 89P8137 ** SPDIF Card assembly (all mo[...]
-
Página 165
8126 Keyboards (Standard PS/2 Black) FRU# CRU US English (models D1C D2C 41C 11 C A1C A2C D3A D3Q E1A E1Q E2A E2Q 13A 13Q 21A 21Q 31A 31Q) 89P8300 * Chinese/US (models D4V 12V) 89P8306 * Thailand (models D3T E1T E2T 13T 21T 31T) 89P8334 * 8126 Power Cords FRU# CRU Power Cord (models D3A D3T D4V E1A E1T E2A E2T 12V 13A 13T 21A 21T 31A 31T) 6952301 *[...]
-
Página 166
Item # 8147 FRUs FRU# CRU 2 ″ L ″ Cover assembly (all models) 59P8546 ** 3 Front Bezel assembly (all models) 59P8544 ** 4 Bezel trim/label kit (all models) 49P1900 ** 5 CD-ROM Drive 48X (Black) - w/o volume ctrl and headphone jack (models 11 U 13U 21U 31U D1U 34U 24U 15U 15F 36U 36F) 40Y8801 * 5 CD-ROM Drive 48X (B[...]
-
Página 167
Item # 8147 FRUs FRU# CRU 10 Intel P4 2.8 GHz Prescott (models CCU 11 U 14U 15U 15F) 19R0423 * * 10 Intel P4 2.8 GHz Prescott (models 12U CDU) 19R0292 * * 10 Intel P4 3.0 GHz Prescott (models 22U 23U CEU 21U 24U 25U 35U 35F 36U 36F) 19R0294 * * 10 Intel P4 3.2 GHz Prescott (models 31U 32U 33U CFU 34U) 19R0296 * * 10 In[...]
-
Página 168
8147 FRUs FRU# CRU System board EMC shield kit (all models) 89P4761 ** Retention kit (all models) 89P6740 ** Heatsink grease, Heat pipe (all models) 13R9195 ** Misc. hardwar e kit (all models) 09N5764 ** RJ1 1 connector adapter (Spain, Ireland) (All ″ G ″ models) 60H6043 * RJ1 1 connector adapter (Austria) (All ″ G ″ models) 60H6045 * RJ1 1[...]
-
Página 169
Machine T ype 8148 Item # 8148 FRUs FRU# CRU 1 Side cover assembly (all models) 59P8547 ** 2 ″ L ″ Cover assembly (all models) 59P8546 ** 3 Front Bezel assembly (all models) 59P8544 ** 4 Bezel trim/label kit (all models) 49P1900 ** 5 CD-ROM Drive 48X (Black) - w/o volume ctrl and headphone jack (models A1U D1U E1U [...]
-
Página 170
Item # 8148 FRUs FRU# CRU 5 CD-ROM Drive 48X (Black) - w/o volume ctrl and headphone jack (models A1U D1U E1U 21U 31U A2U A3G B1G D2G E2G 41U 42U 13U 14G 15G 24G 34G 71G 72G 73G 74G 75G 76G 77G 78G 79G 7AG 7BG 7CG 7DG 15U A4U A4G B2U D3U 7EG 7HG 7JG 7KG E3G 35U 51G 7RG 7UG 25U A5U A5F 18U 18F 29U 29F A6G 7YG 7ZG) 40Y8807 * 5 CD-ROM Driv[...]
-
Página 171
Item # 8148 FRUs FRU# CRU 8 System board, 10/100 E-net, no AGP (models A1U D1U E1U A2U A3G B1G D2G E2G 41U 42U 13U 14G 15G 24G 34G 71G 72G 73G 74G 75G 76G 77G 78G 79G 7AG 7BG 7CG 7DG CAU CBU CCU CDU CEU CFU 15U A4U A4G B2U D3U 7EG 7GG 7HG 7JG 7KG E3G 7MG 7NG 7PG 7QG 7RG 7UG CKU CLU 16U A5U A5F 18U 18F A6G 7VG 7WG 7YG 7ZG) 19R0837 ** 8 S[...]
-
Página 172
Item # 8148 FRUs FRU# CRU 11 Heat sink and fan, Northwood >=3.0 GHZ and all Prescott, Dual Heat Pipe -- optional to 13R9195 (models 12U 22U 31U 32U 15G 7BG CFU 23U 24G 7CG CHU 33U 34G 7DG CJU CGU 15U B1G 73G 74G D2G 76G E2G 77G 78G CCU 75G A4U A4G CKU 7EG 7GG 7JG B2U CLU D3U CMU 7KG 35U 51G 7UG 7MG 7NG 7PG 21U 16U 25U 26U 16U A5U A5F 18U 1[...]
-
Página 173
8148 FRUs FRU# CRU Heatsink grease, Heat pipe (all models) 13R9195 ** Misc. hardwar e kit (all models) 09N5764 ** RJ1 1 connector adapter (Spain, Ireland) (All ″ G ″ models) 60H6043 * RJ1 1 connector adapter (Austria) (All ″ G ″ models) 60H6045 * RJ1 1 connector adapter (Belgium) (All ″ G ″ models) 60H6046 * RJ1 1 connector adapter (Den[...]
-
Página 174
8148 W indows XP Pro Recovery CDs FRU # CRU FR (models A3G B1G D2G E2G 14G 15G 24G 34G 72G 74G 76G 78G 79G 7AG 7BG 7CG 7DG A4G 7JG E3G 51G 7RG 7UG A5F 18F 28F 29F A6G 7VG 7YG 7ZG) 39J6415 * GR (models A3G B1G D2G E2G 14G 15G 24G 34G 72G 74G 76G 78G 79G 7AG 7BG 7CG 7DG A4G 7JG E3G 51G 7RG 7UG A6G 7VG 7YG 7ZG) 39J6416 * IT (models A3G B1G D2G E2G 14G[...]
-
Página 175
Keyboard (Preferred Pro Fullsize, PS/2, Stealth Black) FRU# CRU US English (models A1U D1U E1U 12U 21U 22U 31U 32U A2U A3G B1G D2G E2G 41U 42U 13U 14G 15G 23U 24G 33U 34G 71G 72G 73G 74G 75G 76G 77G 78G 79G 7AG 7BG 7CG 7DG 15U A4U A4G B2U D3U 7EG 7GG 7HG 7JG 7KG E3G 35U 51G 7MG 7NG 7PG 7QG 7RG 7UG 16U 25U 26U A5U 18U 28U 29U A6G 7VG 7WG 7YG 7ZG) 89[...]
-
Página 176
Keyboard (Preferred Pro Fullsize, PS/2, Stealth Black) FRU# CRU Norwegian (models A3G B1G D2G E2G 14G 15G 24G 34G 71G 72G 73G 74G 75G 76G 77G 78G 79G 7AG 7BG 7CG 7DG A4G 7EG 7GG 7HG 7JG 7KG E3G 51G 7MG 7NG 7PG 7QG 7RG 7UG A6G 7VG 7WG 7YG 7ZG) 89P8323 * Polish (models A3G B1G D2G E2G 14G 15G 24G 34G 71G 72G 73G 74G 75G 76G 77G 78G 79G 7AG 7BG 7CG 7D[...]
-
Página 177
8148 Power Cords FRU# CRU Power Cord (models A1U D1U E1U 12U 21U 22U 31U 32U A2U A3G B1G D2G E2G 41U 42U 13U 14G 15G 23U 24G 33U 34G 71G 72G 73G 74G 75G 76G 77G 78G 79G 7AG 7BG 7CG 7DG CAU CBU CCU CDU CEU CFU CGU CHU CJU 15U A4U A4G B2U D3U 7EG 7GG 7HG 7JG CKU CLU CMU 7KG E3G 35U 51G 7MG 7NG 7PG 7QG 7RG 7UG 16U 25U 26U A5U A5F 18U 18F 28U 28F 29U 2[...]
-
Página 178
Machine T ype 8149 1 2 3 4 5 6 7 8 9 10 11 12 13 Item # 8149 FRUs FRU# CRU 1 To p cover assembly (all models) 88P5962 ** 2 230W Power Supply - AcBel PFC (models 11 U 21U 31U 41U 14U CAU CBU CCU CDU CEU CFU 33U CGU 24U) 74P4300 N 2 230W Power Supply - AcBel PFC China (models A1S A1Y D1S D1Y D2S D2Y E1S E1Y E2S E2P E2Y 41S 41P 41Y 42S 42P 42Y 11 S 11[...]
-
Página 179
Item # 8149 FRUs FRU# CRU 4 CD-ROM Drive 48X - Black w/o jack & vol (models 11 U 21U 31U A1S A1Y D1S D1Y D2S D2Y E1S E1Y E2S E2P E2Y 41U 41S 41P 41Y 11 S 11 P 11 Y 12S 12Y 13S 13P 13Y 14U 14S 14P 14Y 15S 15P 15Y 22S 22Y 23S 23P 23Y 32S 32P 32Y A2S A2Y B1S B1P B1Y 33U 24U E3S E3Y E4S E4Y E5S E5Y 25S 25Y 34S 34Y) 40Y8807 ** 4 CD-ROM Drive 48X - B[...]
-
Página 180
Item # 8149 FRUs FRU# CRU 11 System board, (10/100 Enet) w/ video buffer -- optional to 19R0703 (models 21U 31U 12S 12Y 13S 13P 13Y 22S 22Y 23S 23P 23Y 32S 32P 32Y CDU CEU CFU CTO-U 33U CGU 24U) 41D0948 ** 11 System board, 10/100 E-net, no AGP (models 11 U A1S A1Y D1S D1Y D2S D2Y E1S E1Y E2S E2P E2Y 41U 41S 41P 41Y 42S 42P 42Y 11 S 11 P 11 Y 14U 14[...]
-
Página 181
Chapter 11 . FRU lists 175[...]
-
Página 182
The FRUs listed in the following table are not illustrated. 8149 FRUs FRU# CRU Retention kit (all models) 89P6740 * Fan Bracket Assembly >= 3.0Ghz (models 21U 31U 23S 23P 23Y CEU 22S 22Y 32S 32P 32Y CFU 33U CGU 24U 25S 25Y 34S 34Y) 89P6700 * System board EMC shield kit (all models) 89P4761 * Hard disk drive mounting bracket assembly (all models)[...]
-
Página 183
8149 W indows XP Pro Recovery CDs FRU# CRU BR (models E2P 41P 42P 11 P 13P 14P 15P 23P 32P B1P) 39J6419 * 8149 Keyboards (Standard PS/2 Black) FRU# CRU US English (models 11 U 21U 31U 41U 14U 33U 24U) 89P8300 * BR (models E2P 41P 42P 11 P 13P 14P 15P 23P 32P B1P) 89P8304 * SP/LA (models A1S A1Y D1S D1Y D2S D2Y E1S E1Y E2S E2Y 41S 41Y 42S 42Y 11 S 1[...]
-
Página 184
Machine T ype 8174 1 2 3 4 5 6 7 8 9 10 11 Item # 8174 FRUs FRU# CRU 1 Chassis assembly (all models) 74P2256 ** 2 Bezel and shield kit (all models) 74P2257 * 3 CD-ROM Drive 48X - Black w/o jack & vol (models 22A 22T 22B 22H 22V 22Q 23K) 40Y8801 ** 3 CD-ROM Drive 48X - Black w/o jack & vol (models 22A 22T 22B 22H 22V 22QK 23K) 40Y8805 ** 3 C[...]
-
Página 185
Item # 8174 FRUs FRU# CRU 6 Speaker Asm. Soldered T erminals 00N5151 * 7 256 MB SDRAM (models 22A 22T 22B 22H 22V 22Q) 73P2683 * 8 System board, 10/100 E-net, (models 23K) 19R0703 ** 8 System board, (10/100 Enet) w/ video buf fer -- optional to 19R0703 (models 23K) 39J7965 ** 8 System board, (10/100 Enet) w/ video buf fer -- optional to 19R0703 (mo[...]
-
Página 186
The FRUs listed in the following table are not illustrated. 8174 FRUs FRU# CRU Cable, Diskette drive (all models) 59P8568 * Cable, audio (all models) 75H9219 * Cable, IDE (A T A66 1 drop) (all models) 37L4525 * Cable, IDE (A T A66 2 drop) (all models) 37L5098 * Planar shield (all models) 26K1216 * Dual USB 1.1 cable (top channel) (all models) 22P24[...]
-
Página 187
8174 Keyboards (Standard PS/2 Black) FRU# CRU Korean (models 23K) 89P821 * Thailand (models 22T) 89P8334 * 8174 Power Cords FRU# CRU Power Cord (models 22A 22T 22V) 6952301 * Power Cord (EMEA, ANZ, ASEAN Eng, Kor ea) (models 23K) 13F9978 * Power Cord (EMEA, ANZ, ASEAN Eng, HK Eng) (models 22H) 14F0032 * Power Cord (China, HK) (models 22B 22H) 02K05[...]
-
Página 188
Item # 8175 FRUs FRU# CRU 3 CD-ROM Drive 48X - Black w/o jack & vol (models 13B 13H 14B 14H 15K 19C 1AC 1BA 1BT 22C 23C 24A 24T 24B 24H 27K 31B 31H 16V A3J D1V D4Q 41A 41T 43A 43Q 43T 44V 12J 13A 13Q 13T 14Q 14T 16A 16T 1BQ 1BB 1BH 1EA 1ET 1EB 1EH 1HC 1KC 31A 31T D2A D2T D2B D2H 14A D5A D5T 45A 45T 47A 47Q 47T 1LA 1LQ 1L T 1MA 1MQ 1MT 1P A 1PQ [...]
-
Página 189
Item # 8175 FRUs FRU# CRU 5 Hard disk drive, 40 GB EIDE (models 13B 13H 14B 14H 15K 16V 17K 18A 19C 1AC 1BA 1BT 21A 22C 23C 24A 24T 24B 24H 27K 31B 31H A3J D1V D4Q 41A 41T 42Q 43A 43Q 43T 44V 12J 13A 13Q 13T 14Q 14T 16A 16T 1BQ 1BB 1BH 1EA 1ET 1EB 1EH 1FQ 1GQ 1HC 1KC 31A 31T D2A D2T D2B D2H 14A D5A D5T 45A 45T 46Q 47A 47Q 47T 1LA 1LQ 1L T 1MA 1MQ 1[...]
-
Página 190
Item # 8175 FRUs FRU# CRU 8 System board, (10/100 Enet) w/ video buf fer , no AGP -- optional to 19R0837 (models 13B 13H 14B 14H 18A 19C 1AC 1BA 1BT 21A 22C 23C 24A 24T 24B 24H 31B 31H A3J D2A D2T D2B D2H D4Q 41A 41T 42Q 43A 43Q 43T 12J 13A 13Q 13T 14Q 14T 1BQ 1BB 1BH 1EA 1ET 1EB 1EH 1FQ 1GQ 1HC 1KC 31A 31T 14A D3M E1M D5A D5T 45A 45T 46Q 47A 47Q 4[...]
-
Página 191
Item # 8175 FRUs FRU# CRU 10 Heat sink and fan, Northwood >=3.0 GHZ and all Prescott (models 18A 19C 1AC 1BA 1BT 1CM 21A 22C 23C 24A 24T 24B 24H 25V 27K 29M 31B 31H 32K 14Q 14T 16A 16T 1GQ 1HC 1KC 1BQ 1BB 1BH 1DV 31A 31T 14A 1MA 1MQ 1MT 1SQ 1NA 1P A 1PQ 1PT A5Q A6Q A7Q A8V B1A B2A B2T B3A B3Q B3T B3B B3H D6A D7A D7T D8A D8Q D8T D9V DAM E2V E3M D[...]
-
Página 192
The FRUs listed in the following table are not illustrated. 8175 FRUs FRU# CRU Cable, Diskette drive (all models) 59P8568 * Cable, audio (all models) 75H9219 * Cable, IDE (A T A66 1 drop) (all models) 37L4525 * Cable, IDE (A T A66 2 drop) (all models) 37L5098 * Planar shield (all models) 26K1216 * Dual USB 1.1 cable (top channel) (all models) 22P24[...]
-
Página 193
8175 FRUs FRU# CRU RJ1 1 connector adapter (Sweden) (All ″ G ″ models) 60H6054 * RJ1 1 connector adapter (Switzerland) (All ″ G ″ models) 60H6055 * 8175 W indows XP Home Recovery CDs FRU# CRU US (models 1CM 29M D3M 41A 41T 1EA 1ET 1EH E1M B1A D6A DAM E3M 51A 51Q 51T) 39J6250 * SC (models 1AC 23C 1KC 51C) 30R4777 * TW (models 25V) 30R4784 * [...]
-
Página 194
8175 Power Cords FRU# CRU Power Cord (China, HK) (models 13B 13H 14B 14H 19C 1AC 22C 23C 24B 24H 31B 31H D2B D2H 1BB 1BH 1EB 1EH 1HC 1KC B3B B3H DBB DBH 51C 52C 53B 53H) 02K0545 * Power Cord (India) (models D4Q 42Q 43Q 13Q 14Q 1BQ 1FQ 1GQ 46Q 47Q 1LQ 1MQ 1PQ 1RQ 1SQ A5Q A6Q A7Q B3Q D8Q E4Q 51Q) 49P2078 * Machine T ype 8176 1 2 3 4 5 6 7 8 9 10 11 I[...]
-
Página 195
Item # 8176 FRUs FRU# CRU 3 CD-R W Drive (48X/32X/48X) (models 22B) 40Y8901 ** 3 DVD-ROM/CD-R W Combo Drive (48x32x48x16x) (models 21C 13C 32C 51C 52C) 40Y8781 ** 3 4DVD-ROM/CD-R W Combo Drive (48x32x48x16x) (models 21C 13C 32C 51C 52C) 40Y8903 ** 4 Diskette drive, 3.5 1.44 MB (all models) 40Y9107 * 4 Diskette drive, 3.5 1.44 MB (all models) [...]
-
Página 196
The FRUs listed in the following table are not illustrated. 8176 FRUs FRU# CRU Cable, Diskette drive (all models) 59P8568 * Cable, audio (all models) 75H9219 * Cable, IDE (A T A66 1 drop) (all models) 37L4525 * Cable, IDE (A T A66 2 drop) (all models) 37L5098 * Dual USB 1.1 cable (top channel) (all models) 22P2400 * Audio cable assembly ( ATA ) (al[...]
-
Página 197
8176 W indows XP Home Recovery CDs FRU# CRU HK (models 22B) 27K6746 * 8176 W indows XP Pro Recovery CDs FRU# CRU US/UK/AP/TH (models D3H) 39J6414 * HK (models D3B) 30R4827 * 8176 Keyboards (Preferred Pro PS/2 Fullsize) FRU# CRU US English (models D3H) 89P8300 * Chinese/US (models D3B) 89P8807 * 8176 Keyboards (Productivity USB) FRU# CRU US English [...]
-
Página 198
Machine T ype 8177 1 2 3 4 5 6 7 8 9 10 11 12 13 Item # 8177 FRUs FRU# CRU 1 To p cover assembly (all models) 88P5962 ** 2 230W Power Supply - AcBel PFC (models 21M 21A E3U D1U A3G B1G D3G E2G 11 G 13G 14G 15G 16G 17G 23G 24G 25G 31G 32G 72G 73G 74G 75G 76G 77G 78G 79G 7AG 7BG 7CG 7DG 7EG B1U D3U E4U E4G 33G 51G 52G 7FG 7HG 7JG 7KG E7G 7LG 7MG 7NG)[...]
-
Página 199
Item # 8177 FRUs FRU# CRU 4 CD-ROM Drive 48X - Black w/o jack & vol (models 21M 21A 21C 21B 21H 21V E3U D1U A3G B1G D3G E2G 11 G 13G 16G 17G 21Q 23G 25G 32G 72G 74G 75G 76G 77G 78G 79G 7AG 7DG A2G A3U 21T B1U B1S B1P D3U E3S E4U E4G 33G 51G 7FG 7HG 7JG E7G) 40Y8813 * 4 CD-ROM Drive 48X - Black w/o jack & vol (models 21M 21A 21C 21B 21H 21V [...]
-
Página 200
Item # 8177 FRUs FRU# CRU 11 System board, (10/100 Enet) w/ video buffer -- optional to 19R0703 (models 11 S 21M 21A 21C 21B 21H 21V 22S 13G 15G 16G 21Q 22P 22Y 24G 25G 31G 32G 73G 7AG 7BG 7CG 7EG CTO-U CT O-G 21T 52G 7KG) 39J7965 ** 11 System board, (10/100 Enet) w/ video buffer -- optional to 19R0703 (models 11 S 21M 21A 21C 21B 21H 21V 22S 13G 1[...]
-
Página 201
Item # 8177 FRUs FRU# CRU 13 Heat sink and fan, Northwood >=3.0 GHZ and all Prescott (models 21M 21A 21C 21B 21H 21V 22S 13G 14G 17G 73G 77G 7AG 15G 16G 7BG 21Q 22P 22Y 23G 24G 25G 7CG 7DG 31G 32G 7EG 21T B1U B1S B1P D3U E3S B1G 76G D2S D2P D2Y D3G 75G E3U E1S E1P E1Y E4U E4G 7FG 31G 32G 7EG 33G 7HG 51G 52G 7JG 7KG E5U E5G 7GG E6S E6Y 26S 26Y 34[...]
-
Página 202
The FRUs listed in the following table are not illustrated. 8177 FRUs FRU# CRU Retention kit (all models) 89P6740 * Fan bracket assembly (models 21M 21A 21C 21B 21H 21V 22S 21Q 22P 22Y 23G 24G 25G 7CG 7DG 31G 32G 7EG 21T 33G 7HG 51G 52G 7JG 7KG 26S 26Y 34S 34Y E7G 7NG) 89P6700 * System board EMC shield kit (all models) 89P4761 * Hard disk drive mou[...]
-
Página 203
8177 W indows XP Home Recovery CDs FRU# CRU DK (models A2G) 39J6257 * NL (models A2G) 39J6260 * AE (models A2G) 39J6264 * SV (models A2G) 39J6256 * HE (models A2G) 39J6261 * FI (models A2G) 39J6258 * NO (models A2G) 39J6259 * PL (models A2G) 39J6262 * PO (models A2G) 39J6268 * RU (models A2G) 39J6265 * HU (models A2G) 39J6267 * CZ (models A2G) 39J6[...]
-
Página 204
8177 W indows XP Pro Recovery CDs FRU# CRU HE (models A3G B1G D3G E2G 11 G 13G 14G 15G 16G 17G 23G 24G 25G 31G 32G 72G 73G 74G 75G 76G 77G 78G 79G 7AG 7BG 7CG 7DG 7EG E4G 33G 51G 52G 7FG 7GG 7HG 7JG 7KG E7G 7LG 7MG 7NG) 39J6425 * FI (models A3G B1G D3G E2G 11 G 13G 14G 15G 16G 17G 23G 24G 25G 31G 32G 72G 73G 74G 75G 76G 77G 78G 79G 7AG 7BG 7CG 7DG [...]
-
Página 205
8177 Keyboard (Preferred Pro Fullsize, PS/2, Stealth Black) FRU# CRU US English (models 21M 21A 21C 21H E3U D1U A3G B1G D3G E2G 11 G 13G 14G 15G 16G 17G 21Q 23G 24G 25G 31G 32G 72G 73G 74G 75G 76G 77G 78G 79G 7AG 7BG 7CG 7DG 7EG A2G A3U B1U D3U E4U E4G 33G 51G 52G 7FG 7HG 7JG 7KG E7G 7LG 7MG 7NG) 89P8300 * Arabic (models A3G B1G D3G E2G 11 G 13G 14[...]
-
Página 206
8177 Keyboard (Preferred Pro Fullsize, PS/2, Stealth Black) FRU# CRU Norwegian (models A3G B1G D3G E2G 11 G 13G 14G 15G 16G 17G 23G 24G 25G 31G 32G 72G 73G 74G 75G 76G 77G 78G 79G 7AG 7BG 7CG 7DG 7EG A2G E4G 33G 51G 52G 7FG 7GG 7HG 7JG 7KG E7G 7LG 7MG 7NG) 89P8323 * Polish (models A3G B1G D3G E2G 11 G 13G 14G 15G 16G 17G 23G 24G 25G 31G 32G 72G 73G[...]
-
Página 207
8177 Keyboards (Productivity USB) FRU# CRU US English (models E4U E4G 33G 51G 52G 7FG 7GG 7HG 7JG 7KG) 89P8800 * Arabic (models E4G 33G 51G 52G 7FG 7GG 7HG 7JG 7KG) 89P8801 * Arabic/French (models E4G 33G 51G 52G 7FG 7GG 7HG 7JG 7KG) 89P8802 * Belgian/French (models E4G 33G 51G 52G 7FG 7GG 7HG 7JG 7KG) 89P8803 * Belgian/UK (models E4G 33G 51G 52G 7[...]
-
Página 208
8177 Power Cords FRU# CRU Power Cord (EMEA, ANZ, ASEAN Eng, HK Eng) (models 21H A3G B1G D3G E2G 11 G 13G 14G 15G 16G 17G 23G 24G 25G 31G 32G 72G 73G 74G 75G 76G 77G 78G 79G 7AG 7BG 7CG 7DG 7EG A2G E4G 33G 51G 52G 7FG 7HG 7JG 7KG E7G 7LG 7MG 7NG) 14F0032 * Power Cord (EMEA) (models A3G B1G D3G E2G 11 G 13G 14G 15G 16G 17G 23G 24G 25G 31G 32G 72G 73G[...]
-
Página 209
Machine T ype 8178 1 2 3 4 5 6 7 8 9 10 11 12 13 Item # 8178 FRUs FRU# CRU 1 To p cover assembly (all models) 88P5962 ** 2 230W Power Supply - AcBel PFC (models D1M 12M 12A 13M 21M 22M 14G 15G 16G 23G 24G 31G 32G 71G 72G 73G 74G 75G 76G CT0-U CTO-G D2M E1M 33M 34M 51G 51A 51T 52G 77G 78G) 74P4300 N 2 230W Power Supply - AcBel China version (models [...]
-
Página 210
Item # 8178 FRUs FRU# CRU 4 CD-ROM Drive 48X - Black w/o jack & vol (models D1M 12M 12A 12C 12B 12H 12V 21M 12Q 14G 15G 24G 32G D2M E1M 51G 51A 51Q 51T) 40Y8929 ** 4 DVD-ROM 16X/48X (Black) (models 16G 23G 31G 71G 72G 73G 74G 75G 76G 52G 77G 78G) 40Y881 1 ** 4 CD-R W Drive (48X/32X/48X) (models 13M 22M 33M) 40Y8901 ** 4 Rambo IV (models 34M) 26[...]
-
Página 211
Item # 8178 FRUs FRU# CRU 12 Intel Prescott P4 2.8 GHz (models 15G 16G 71G 72G) 19R0292 ** 12 Intel Prescott P4 3.0 GHz (models 21M 22M 23G 24G 73G 74G) 19R0294 ** 12 Intel Prescott P4 3.2 GHz (models 31G 32G 75G 76G 33M 34M) 19R0296 ** 12 Intel Prescott P4 3.4 GHz (models 51G 51A 51Q 51T 52G 77G 78G) 29R6991 ** 13 Heat sink and fan, Northwood <[...]
-
Página 212
The FRUs listed in the following table are not illustrated. 8178 FRUs FRU# CRU Retention kit (all models) 89P6740 * Fan bracket assembly (models 21M 22M 23G 24G 73G 74G 31G 32G 75G 76G 33M 34M 51G 51A 51Q 51T 52G 77G 78G) 89P6700 * System board EMC shield kit (all models) 89P4761 * Hard disk drive mounting bracket assembly (all models) 88P5916 * He[...]
-
Página 213
8178 W indows XP Pro Recovery CDs FRU# CRU FR (models 14G 15G 16G 23G 24G 31G 32G 71G 72G 73G 74G 75G 76G 51G 52G 77G 78G) 39J6415 * GR (models 14G 15G 16G 23G 24G 31G 32G 71G 72G 73G 74G 75G 76G 51G 52G 77G 78G) 39J6416 * IT (models 14G 15G 16G 23G 24G 31G 32G 71G 72G 73G 74G 75G 76G 51G 52G 77G 78G) 39J6418 * SP (models 14G 15G 16G 23G 24G 31G 32[...]
-
Página 214
8178 Keyboards (Standard PS/2 Black) FRU# CRU Bulgarian (models 14G 15G 16G 23G 24G 31G 32G 71G 72G 73G 74G 75G 76G 51G 52G 77G 78G) 89P8305 * Chinese/US (models 12B 12V) 89P8306 * Czech (models 14G 15G 16G 23G 24G 31G 32G 71G 72G 73G 74G 75G 76G 51G 52G 77G 78G) 89P8307 * Danish (models 14G 15G 16G 23G 24G 31G 32G 71G 72G 73G 74G 75G 76G 51G 52G 7[...]
-
Página 215
8178 Keyboards (Standard PS/2 Black) FRU# CRU Swiss F/G (models 14G 15G 16G 23G 24G 31G 32G 71G 72G 73G 74G 75G 76G 51G 52G 77G 78G) 89P8333 * T urkish 440 (models 14G 15G 16G 23G 24G 31G 32G 71G 72G 73G 74G 75G 76G 51G 52G 77G 78G) 89P8335 * T urkish 179 (models 14G 15G 16G 23G 24G 31G 32G 71G 72G 73G 74G 75G 76G 51G 52G 77G 78G) 89P8336 * UK Engl[...]
-
Página 216
Machine T ype 8179 Item # 8179 FRUs FRU# CRU 1 Side cover assembly (all models) 59P8547 * 2 ″ L ″ Cover assembly (all models) 59P8546 ** 3 Front Bezel assembly (all models) 59P8544 * 4 Bezel trim/label kit (all models) 49P1900 * 5 CD-ROM Drive 48X - Black w/o jack & vol (models 12C 13C) 40Y8801 * 5 CD-ROM[...]
-
Página 217
Item # 8179 FRUs FRU# CRU 6 Diskette drive, 3.5 1.44MB (all models) 40Y8899 * 6 Diskette drive, 3.5 1.44MB (all models) 40Y9105 * 7 Hard disk drive, 40GB EIDE (models 12C 13C) 40Y8757 * 8 System board, 10/100 E-net (models 13C) 19R0703 ** 8 System board, (10/100 Enet) w/ video buf fer -- optional to 19R0703 (models 13C[...]
-
Página 218
8179 FRUs FRU# CRU Mouse, optical wheel (models 12C 13C) 89P5089 * Cable clip (all models) 59P8584 * System board EMC shield kit (all models) 89P4761 ** Retention kit (all models) 89P6740 N Heatsink grease, Heat pipe (all models) 13R9195 ** Misc. hardwar e kit (all models) 09N5764 ** RJ1 1 connector adapter (Spain, Ireland) (All ″ G ″ models) 6[...]
-
Página 219
Chapter 12. Additional Service Information This chapter provides additional information that the service r epresentative might find helpful. Security features Security features in this section include the following: v Passwords v V ital Product Data v Management Information Format (MIF) v Alert on LAN ™ Hardware controlled Passwords Hardwar e con[...]
-
Página 220
1. Click Start from the desktop, then Programs . 2. Select SystemV iew Agent 3. Select the Serial Number Information icon 4. Click the plus sign to expand. 5. Select the component you want to view or edit. 6. Double click on the component you want to change. 7. Enter new data in the V alue field, then click Apply . BIOS levels An incorrect level of[...]
-
Página 221
5. On the Flash BIOS Update page, scroll down to locate the .txt file for the flash from the operating system version. Click the .txt file. 6. Print these instructions. This is very important because these instructions are not on the screen after the download begins. 7. From the browser , click Back to return to the list of files. Carefully follow [...]
-
Página 222
Power management Power management reduces the power consumption of certain components of the computer such as the system power supply , processor , hard disk drives, and some monitors. Automatic configuration and power interface (ACPI) BIOS Being an ACPI BIOS system, the operating system is allowed to control the power management features of the co[...]
-
Página 223
Recovering software using the Rescue and Recovery program The Rescue and Recovery program pr ovides an environment that runs independently of the W indows operating system and is hidden from the W indows operating system. Because the Rescue and Recovery workspace is hidden, it is immune from most vir us attacks and provides a safe place to perform [...]
-
Página 224
218 Hardwar e Maintenance Manual[...]
-
Página 225
Appendix. Notices Lenovo may not offer the pr oducts, services, or features discussed in this document in all countries. Consult your local Lenovo repr esentative for information on the products and services curr ently available in your area. Any refer ence to a Lenovo product, program, or service is not intended to state or imply that only that Le[...]
-
Página 226
vary significantly . Some measurements may have been made on development-level systems and there is no guarantee that these measur ements will be the same on generally available systems. Furthermore, some measur ements may have been estimated through extrapolation. Actual r esults may vary . Users of this document should verify the applicable data [...]
-
Página 227
[...]
-
Página 228
Part Number: 19R1295 Printed in USA (1P) P/N: 19R1295[...]