LevelOne FCS-9900-CH manual

IP CamSecure User Manual Ver : 1. 30 -110823 Copyright (c) 201 1 Digital Data Communications Co., Ltd. All Rights Reserved. All features and functions are subject to change without notice. Please visit www .level1.com for the latest ones.[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 1 - TABLE OF CONTENTS TABLE OF CONTENTS ........................................................................................................................ 1 INSTALLATION ....................................................................................................................[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 2 - 2.2.4 Video Preview ............................................................................................................................................. 38 2.2.5 Event Type ..........................................................................................................[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 3 - 4.1.16 System E vent – Netw ork Congestion ................................................................................................ .... 65 4.1. 17 System E vent – TV -Out ........................................................................................................[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 4 - 6.2 Operate Mode ................................................................................................................................................... 94 6.2.1 Device and Ma p Tree list ........................................................................................[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 5 - 10. 4 Download Clien t Pack ................................................................................................................................ . 115 11. UTILITIES ...............................................................................................................[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 6 - Installation Minimum System Requirement Total FPS at C IF 2200~1400 1400~1050 1050~550 550~ CPU Intel Core I7 Intel Core I5 Intel Core 2 Q uad Q9400 Intel Core 2 Duo E5300 RA M 2GB 2GB 2GB 1GB Motherboard Intel 55 or 57 chip or abov e, MB vendor Asus, Gigaby te or Intel w ith Intel Ch ip[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 7 - Install IP ca mera(s) Step 1: Set up the IP camera referring to the q uick installation guide provided. Step 2: Check the network between the IP c amera and the system. Step 3: Add the IP camera to the sy stem. S ee details on later pages. Install capture card(s) Step1: Insert the card o[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 8 - INSTALLATION The Installation CD contains the soft ware you need to run the compl ete system. If you are instal ling the system on multiple PCs, insta ll the appropriat e software for each PC : - Server Application: All funct ions of IP CamSec ure systems including MainConsole , Playback[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 9 - IP CamSecure Insta llation Step 1: Insert the Installation CD. Run autorun.exe from the CD- ROM directl y to start the installation. Step 2 : The setup page s hould be loaded a utomatically. If it does not, please select your CD-ROM drive manually to open t he setup page . Click “IP Ca[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 10 - Step 4: Select Next to conti n ue . Step 5: Check t he option I acc ept the terms of the license agreement , selec t Next to continue . Step 6: Enter t he appropria te information, select Next to continu e. Step 7: Choose C omplete or Custom setup type .[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 11 - COMPLETE SETUP T YPE Install s all program features into t he default directory. Check Complete , and then sele ct Next . All progra m features wi ll be installed. [C OMPLETE SETUP requires the most di sk space.] CUSTOM SETUP T YPE Allows you to inst all the system t o a preferred direc[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 12 - Remote Desktop Tool Remote Desktop Tool allow user remot e to access M ain Console System a nd setup configurati on. Step 1 : Insert the Installation CD. Run autorun .exe from the CD -ROM di rectly ( LevelOne -Pro-1 .xx.x /RemoteDesktopV iewer ) to start the installation. Step 2: Select[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 13 - Step 6: Select Complete or Cus tom setup t ype. COMPLETE SETUP T YPE Install all p rogram features into the de fault directory. Check Complete , and then sele ct Next . All progra m features will be installed. [Req uires the most disk space.] CUSTOM SETUP T YPE Install the system t o a [...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 14 - Step 8 : Select Finish after insta lling the system complet ely.[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 15 - DVR Driver Installation Driver Instal l Tool help user to auto det ect type of capt ure card and insta ll corresponding drivers. Step 1 : Insert the Installation CD. Run InstallDri .exe from the CD-ROM di rectly to start t he installation. Step 2: In t he Driver Setup dia log box, selec[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 16 - Step 5 : Click Fin ish after instal ling the system complet ely, and then choose to reb oot now or lat er.[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 17 - PDA Client Installa tion Step 1 : Connect PD A device to t he PC. Step 2 : Insert the installation CD, click PDA Client Ins tallation from the CD- ROM direct ly (LevelOne-Pr o-1.xx.x /PDA_Client ) to automatical ly install the client a pplication in device. Note : I f you do not have Mi[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 18 - Smart Phone Client Installation Step 1 : Connect Smart Phone device t o the PC. Step 2 : Insert the installation CD, click Smart Phon e Client Installation from the CD- ROM direct ly (LevelOne-Pro- 1.xx.x /SP_Clien t)to automat ically install the cl ient application in device. Note : I [...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 19 - iPhone Client Installa tion Requirements: Comp atible with iPhone, iPod touch, and iPad . Requires iOS 3.0 or lat er Main console Step 1 : To see live view on your iPhone , you mu st enable live st reaming service in main console. 1.) Go to network s ervices 2.) Start Live Stream ing 3.[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 20 -[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 21 - iPhone Please go to iTunes st ore (AppStore on iphone ) to downl oad Level1 iCamSecure 1.) Open AppStore 2.) Search for iCam Secure 3.) Install iCam Secure 4.) Run iCamSecure an d input server inf o[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 22 - iPhone Screenshots Notes : if use free bundle I P CamSecure s oftware, it only support 1- CH remote live view , if you want t o select different c annel, it must to change t he server ’ s setting.,[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 23 - Quick Start Execute Main Console Step 1 : Go to Start > All Progr ams > Surveilla nce System > M ain Console t o execute Ma in Console. Step 2: Enter your own password int o the edit box, enter it again for double confirm a nd then cli ck on OK . Activate IP Camera Licens e(s) [...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 24 - Install IP camera( s) Step 1 : Setup the I P camera(s) by referri ng to the user man ual provided b y th e IP camera manufact urer. Step 2: Make s ure you can acc ess this camera t hrou gh I E browser. Step 3 : Add the I P camera ( s) to t he system b y following the steps below. Add IP[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 25 - Set Schedule Step 1: Exec ute Main Console. Step 2: Type in user name and password. Step 3: Select Schedule . Step 4: The defa ult schedule is “alw ays record' when a camera is newl y inserted. Step 5 : Choose a camer a and then select Configure or just double click on the schedu[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 26 - Step 4 Start Recording & Smar t Guard Step 1 : Execute Ma in Console. Step 2 : Type in user name and password a nd log in t he system. Step 3 : Click on Star t . Step 4: Click on Start Recoding Sch edule and Star t Smart Guard S ystem to enable t he two functions. Playback Step 1: E[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 27 - 1. Main Console This is the main operati ng system - t o activate schedule rec ording, setup sma rt guard and configure system set ting.[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 28 - 1.1 User Int erface Overview Exit: Shut down th e Surveillance System or log out current user. Minimize: Minimize the M ain Console wi ndow. Screen Division: Allocate th e sub-screen displa y by clicking on the desired la yout icon. To switc h to single camera display, double cli ck on [...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 29 - Note: To customize Informa tion about window’s setting, go to Config - Setting - General - Stat us Dis play. Select A dvanc ed Setting for further i nformation like Temperat ure, Fan speed, System Re source and Network Util ization. Start: Click on the Start icon and select from the d[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 30 - Select from the drop do wn menu to modify the g eneral sett ings , user acc ount setti ngs, save/ load configuration sett ings, open License Manager , edit counting a pplication and POS applicat ion, access log viewer and b ackup files, or setup netw ork services. See Config on page 70 [...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 31 - 1. 3 On Scr een Menu Right clic k on the camera screen and get the On Screen M enu, from which you can quickl y adjust the setting of camera . 1. 3.1 Enabl e Move/Area Z oom With camera s that support PT function, click the Enable Move funct ion to adjust the current camera’s view by [...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 32 - 1. 3. 10 Fix Aspect Rati o For some special camera resolution, user can en able Fix Aspect Ratio to view original ratio video, or di sable this opti on to stretch 3:4 to fit w in dow. 1. 3. 11 Instant Playbac k *This feature is not available under Lit e License. To open the I nstant Pla[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 33 - 1. 5 Instant Pla yback * not availab le under Lite License Instant Playback function allow s you to play the last few minutes of any live video ch annel . Simpl y right click on Live Channel and select I nstant Playback to access the recorded video. 1. 5 .1 Instant Playback window over [...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 34 - To take snapshots of a video cli p: Pause the video in image whi ch you want to export and cl ick the snapshot button . The snapshot is displayed and can be save d or copied t o clipboard. To export recorded vide o: Select export period , cl ick the exp ort button , and setup t he optio[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 35 - 2. Playback Watch the recorded vi deo, view and/or search for unusual event s and recorded s ystem information. *There is only 1 channel displayed in Playback in IP CamSecure Lite while there are up to 16 channels displayed in IP CamSecure Pro/Pro Plus simultaneously.[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 36 - 2.1 User Interface overview: Minimize: Min imize the Playback console . Exit: Shut down the Playback console . Scroll bar: Indi cates the status of the p laying video ; drag it to where you w ant to review . Information Windo w : Display time and dat e, video stat us, cue in/ out time p[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 37 - On Screen Menu: Toggle Fullscreen : Select to view cameras under f ull screen. Press “E sc” or right click to go back t o original view . Enable ImmerV ision PTZ : Adjust PTZ i n PTZ mode. (De pend on device ) ImmerV ision Lens Setting : Select the mode of lens , original, PTZ mode [...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 38 - 2. 2 Open Record / Date T ime Search Dialog Click on th e Open Record / Date Tim e Search Dialog button to access th e Date- Time Panel and withdraw t he video record that you want to review. 2. 2.1 Date Tim e Panel 2. 2.2 Record Display Window The record displa y window shows t he info[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 39 - 2. 2.6 Time Table  Utilize th e icon to select all channel s; also utilize the icon to deselect all channels. Finally , utilize the scale b ar to modify th e scale of the time t able.  Selecting “Show Records” makes Time Table show the period of recordi ng data as below:  S[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 40 - Step 5: Click t he camera name t o increase or decrea se cameras you wan t to playback . Step 6: Click OK when setti ng is complet e. 2. 3 Search Mode Click on the Search Mode icon to obtain the I ntelligent Search Tool panel. * This feature is not availabl e under Lite License .  In[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 41 - 2. 3.3 Unusual Event-Miss ing Object  Missing Object : Detecti on of selected objects re moved from the defi ned area on the screen.  Define detect ion zone: Left click and dra g to draw a detection zone. The search tool will det ect selected objects removed in this zone .  Sen[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 42 - Step 3: Click on the Save Video b utton , choose the folder w here you wa nt to save the file a t, enter the file name and c lick SAVE . Step 4: Set t he Export Format (ASF recommend) a nd set the Use Profile .  ASF – more effici ent than AVI format. [Recommend ed format]  AVI ([...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 43 - 2. 7 Print Click on the Print button to print the current image of the video you choose . Print Content: Print the image from the current selected chan nel or all the channels shown on the screen. Selec t to print original view or selected region on camera. Page Setting: Set to print th[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 44 - 2. 9 Log Vi ewer Click on the Log Viewer butt on to ac tivate the Log View er dialog. *IP CamSecure Lite only has System Log option in Log Viewer. 2. 9.1 Unusual Event View the unusual event history that had been detected by th e Smart Guard System. Step1 St ep2 Step 3 Step1: Choose t h[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 45 - 2. 9.2 Export and Backup Log View the E xport and Backup Log h istory that h ad been operated by local or remote user. Step1: Choose t he type of event you wan t to check or select All from t he drop-down men u for all types of events. 3. 4. 5. 6. 7. 8. 9. Step 2: View the events that h[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 46 - Step1: Choose t he type of event you wan t to check or select “ A ll” from the drop - down menu for a ll types of events. Step 2: View the events that happened on a particular date or during a given time period by selecting search period. For a particular da te: check the Date box a[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 47 - 2. 9.5 Counting Application (Diag ram) Display the Count ing Applicati on data in diagram format. * not availa ble under Lite License Step1: Select t he channel you want to check or select All from th e drop-dow n menu for all channels. Step 2: From the drop -dow n menu, set up how yo u[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 48 - 2. 9.7 Export and Backup Log View the E xport and Backup Log h istory that h ad been operated by local or remote user. Step1: Choose t he type of event you wan t to check or select All from t he drop-down men u for all types of events. Step 2: View the events that happened on a particul[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 49 - 2.1 0 Setting Click on th e General Setting b utton and go to Setti ng for system configurat ions. Record Display s etting:  Calendar View : Choose to di splay records under calendar view .  List Control: Ch oose to displ ay records under che cklist . Play setting:  Play when o[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 50 - 2.1 1 Remote Serv er 2.11.1 Add Remote Playback Sit e Press the Remot e Server Icon or g o to settin g – server to config rem ote playback sit e managemen t to add and setup remote playback sit es. Step 1: Enter t he IP address or DNS , Port, Username, and Passw ord. Step 2: Click Add[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 51 - 3. Schedule Click on the Sch edule icon on the Ma in Console and set up t he time duration for video recording on the sch edule configuration p anel.[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 52 - 3. 1 Day / w eek Mode Load Camera / Channel Day /Week Mod e Day Mode: S ched ule the cameras to turn t he recorder on and off at the same time every day accor ding to your setting. Week Mode: Allows you to schedule each camera for a different day o f the week, additionally, you may assi[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 53 - FCS-8005, 8006 series (Analog cam era) Mode Format Time Record FPS Quality Resolution Regular MPEG-4 0:00-24:00 Always 30 Normal CIF Office MPEG-4 8:00-20:00 Always 30 Normal CIF Shop MPEG-4 10:00 -22:00 Always 30 Normal CIF Highly Secure MPEG-4 0:00-24:00 Always 30 Highest Max Disk Sav[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 54 - 3. 1. 2 Insert a New Schedul e Manually Step 1: Left- click and draw the bar you want a dd to the time table. The scheduled t ime wil l show as a grey bar. Step 2: C lick the Insert icon an d add a new schedule in the Regular Mode, i.e. to record video duri ng the time period you set w [...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 55 - Holiday: You ma y assign holida ys where the syste m will work acc ording to the setting for Sunday. Note: The default Holiday sett ing will apply Sunday ’ s setti ngs. For the Middl e East region where Friday is a holiday, please adjust setting b y right click ing on and select “ A[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 56 - 3. 3 Encodin g Option 3. 3.1 Pre-r ecord/ Post-record Time The pre-record / post-record funct ion saves the recording dat a accordingly. For insta nce, to set up a 5 second pre-reco rd time means t he system will st art saving the recordi ng data 5 seconds before t he event happens. Not[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 57 - For IP camera s The Encode Video function will reduce frames or re-encode original streami ng f ro m IP cameras. To save Hard Disk usage, adjust framer ate with original video format or re -encode to smaller file size by adjust ing frame rate, resolution and Q uality/ Bit rate . Keep Or[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 58 - 4. Guard *Guard is only in IP CamSecure Pro. Click on the Guard button on t he Main Console to st art the “ Event and A cti on Configuration ” panel. You w ill need to specify an event to be detect ed as well as set the app ropriate action for the syst em when the event occurs. Note[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 59 - 4.1 Event There are 4 sources of e vents: Camera (video image), POS , Digital Input (devic e connected to you r PC) and System (condition of your hard ware). You can assign multiple event s by following th e instructions below. * Note: Some event types will n ot be avail able under Lite[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 60 - Event Report t han cancel t he event(s).  Cancel event aft er timeout xx seconds : Enabl e checkbox and set the timeout seconds to can cel the event aft er a specific time w hether the even t disappears or not . 4.1.3 Camera Event - Signal Los t Detect the l oss of video signal from [...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 61 - 4.1.6 Camera Event - Foreign Ob ject Alarm w il l be set off when an object appears in the defi ned area on t he screen. Alarm Event Option:  Sensitivit y: Click and move the sl ider control to t he right to increase sensitiv ity so that mi nimal movemen t will trigger the alarm. Mov[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 62 - Alarm Event Option:  Sensitivit y: Click and move the sl ider control to t he right to increase sensiti v ity so that minimal movemen t will trigger t he alarm. Move the bar t o the left to reduce the sensit ivity of movement . Set ti ng up the appropriat e sensitivity value wil l re[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 63 -  Ignore Light ing: Check the box to avoid alarm bei ng set off by light c hanging. Region Definition:  Define detect ion zone: To detect Lose Focus, you h ave to define a de tection zone. Left -click and drag the mouse to draw a detection zone . You may define more th an one zone [...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 64 - Step 3: Configure t he setting of the E vent Type. Plea se refer to the PO S section of the U ser manual. 4.1.11 Digital Input E vent - Digita l Input Event Step 1 Step 2 Step 1: Click an d highlight Digital Input on the event type list, and t hen click the I nsert Event icon. Step 2: S[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 65 - 4.1.13 System Event - Disk Space E xhausted This functi on alarms you when disk spa ce i s exhausted. 4.1.14 System Event - System Health Unusual This functi on alarms you when CPU is under hi gh temp erature or fan speeds are running l ow. Current Stat us: Displays current CPU t empera[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 66 - 4.2 Action 4.2.1 Action - Assign a action typ e Step 1 Step 2 To insert a new action: Step 1: Choose an e vent and cl ick the insert action icon . Step 2: There are 10 types of actions , se lect th e actions you want and then click OK. 1. On Screen Display 2. Play Sound 3. Send E-mail 4[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 67 - 4.2.4 Action Type - Send E-mail The system will send an E -mail immediat ely to given ac counts indicating the ty pe of event, the time, and attachin g a picture taken while t he event is detected. Step 1: Se lect the “ Send E-mail ” act ion and then click OK. Step 2: The resp ondin[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 68 - 4.2.7 Action Type – DI/DO To trigger Di gital input/output devices connec t ed to the system, such as alarm li ghts and sirens. Step 1: Se lect the “DI/DO” ac tion and th en click OK. Step 2: The resp onding window w ill prompt user to Select Digital Input Modul e. Click the “DI[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 69 - 4.2.10 Action Type – Send snaps hot to FTP The system will upload a snapshot i mmediately t o FTP site. * Note: This functi on is not avail able under Lite Lic ense. Step 1: Se lect the “ Send snapshot to FTP ” action and then c lick OK. Note: 1. For Digital Inp ut Events, this w [...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 70 - 5. Config uration Click on the Config ic on, select from t he drop-do wn menu and open the Configu ration panel . Modify the s etting and access License Man ager, Count ing applic ation, POS applicati on, Log viewer, Bac kup, Network Service s. Select Save/Load Configurat ion to save/lo[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 71 - 5.1 Setting – Gen eral 5.1.1 Startup Check the Ma in Console box t o execute Main Console s ystem when w indows startup. Check the follow ing 3 main functi ons and 5 network services to auto activa te functions wh en Main Console system is executi ng, including Schedule R ecording Sys[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 72 - Note: 1. The system wi ll detect the storage space of default locat ion firstly, if the default st orage space is exhausted, the vi deo will be stored t o the next direct ory. 2. If all th e status of locations exceeds the storage r ule, the system wil l start recycling in an hour progr[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 73 - 5.1.4 Miscellaneous Automatically Pop up Event Re port : Event r eport dialog to automat ically popup wh en events are detected. Make sure to stop S mart Guard System b efore you modi fy the setting, otherw ise the modi fication will not tak e effect. Minimize t o system tray : Enab le [...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 74 - 5.1.6 Auto Reboot Check the opti on of “Enabl e Auto Reboot” so th at you can reboot t he system on the ti me you select. Step 1: Check t he option of “En able Au to Rebo ot .” Step 2: Select the time you wan t to reboot. Note : E nable “Mai n Console”, “Auto Login” , ?[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 75 - 5.2 Setting - Ca mera 5.2.1 Add Camera Four function but tons will be included in the Setting/Camera pa nel if you have o ur Hybrid Surveillance Syst em license for IP ca mera. Search: Click on t he Search i con for the Search I P Camera panel . The system w ill start sca nning automati[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 76 - 5.2.2 IP Camera / Vide o Server Setting panel Network: Fill in required info of the Net work field (including Name , IP Address, Htt p Port, User Name, P assword and Protocol) referring to the instruction provided by the camera manufacturer. Check “Use DNS” to use domain name i nste[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 77 - the remot e live view function. Ea ch profile has different Format, Frame, Resoluti on, Quality and B it rate (Kbps) settin gs. Note: The types of stream p rofiles an d options wil l differ among stream s ources.  IP camera s on NVR IP+ License : 5 profiles includin g Original (n ot [...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 78 - Advanced Setting 5.3 Setting - I/O Device I/O Device Setting:  Module Sett ing: Name the mod ule device and ID that h as been connect ed to the digita l input/output device(s) to your system .  Device: This col umn displays the devic e(s) already instal led to the system.  ID: [...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 79 - Install PTZ camera s and follow th e instruction s of the camera manufacturer. A PTZ camera is usually connected t o the PC with RS-485 /RS-422. Check the box on t he camera list t o activate the PTZ control f unction of a PTZ camera . Basic Setting: Sel ect the camera model , com port [...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 80 - 5.5 Setting – Hotline *Hotline is only in IP CamSecure Pro. Configure the sett ings of various cont acts or devices , including E -mail, FTP, GSM modem an d Telephone cal ls which will b e triggered upon event det ection. E-mail: Input the following informati on: Server, Por t, and Se[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 81 - 5.6 S etting - Address Bo ok Manage t he address book from whi ch you may send out a phone cal l or an E -mail when a n unusual event is detected. *Address Book is only in IP CamSecure Pro /Pro Plus. 5.7 S etting – Monitor Display Playback Option: E xecute Playbac k on the seconda ry [...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 82 - 5.8 S etting – Joystick * Note: This functi on is not avail able under Lite l icense. Function: You can choose th e function from the drop -down menu for the butt on of the joystick . Note: Followi ng is a complet e list of all log types: 1. N/A 2. Goto Preset Point 3. Goto Camera 4. [...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 83 - 5. 9 User Ac count Setting Only default a dmin account could mana ge the user acco unts here. From the l ist on this tab , highlight each account and modify the privilege set ting. There are 3 default privilege profiles of a ccount groups:  Admin: Have pri vileges of all system funct[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 84 -  Function: Check t he settings , operation relat ed and system c onfiguration, a nd the privilege of rem ote access.*  Device: Check t he device privileges of camera , digit al output and POS in M ainConsole and client applicati ons. 5.10 License Manager The license of the so ftwa[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 85 - 5.12 Counting Applicati on * Note: This functi on is not avail able under Lite l icense. Camera List Operation Start Simulation Options Runtime *Counting Application is only in IP CamSecure Pro/Pro Plus. Camera List: Selec t which camera would enable counti ng application. Operation: De[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 86 - 5. 14 Networ k Service There are 5 types of net work services: Live streaming server , Remote playba ck server, 3GPP service , Remote Desktop, and Cent ral Management Servi ce. From th e Main Console, go to Config - Netw ork Service t o obtain the Netw ork Service panel. *IP CamSecure L[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 87 - Options: Adjust t he setting only when t he server is stopp ed.  Port: Assign a port for the client s to connect to your system via Remote Live V iewer. Default port is 5150.  Maximum Connect ions: Number of c onnections th at are allowed t o connect to the system . Default is 16 [...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 88 - Performance 5. 14.2 Re mote Playback Server When starting the remote playback function, the system allows remote us ers to log in t o the specific co mputer and withdraw data files that are st ored on it. As system a dministrator, user could be ab le to monitor the accounts logging in t[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 89 - Client list:  User Count: Show the number of users that are c onnecting to system.  Kill Client : Highlight an IP address and click on t he “Kill Client ” button to block the client from your client list.  Kill All Clients: Click on this butt on and then block all the clien[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 90 - 5. 14.4 Remote Desktop When starting the Remote Desktop, the system allow s remote users to use Remote Deskt op Tool to logi n and configure syst em. See Appendix B t o install and use this tool. Options:  Port: Assign a port for Desktop tool to login an d configure system.  Disco[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 91 - 5.15 About Main C onsole Go to About Ma in Console for det ailed system an d license informati on. 5.16 Video Source (For system wit h MPEG4 capture device only , n ot supported under Lit e license ) Step 1: Go to Video Source to adjust the Video Standard t o NTSC or PAL. Step 2: Adjust[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 92 - 6. E- Map With E-M ap, users can easily track the actual location of an occurring even t, at the moment it happens. The arrow and ligh tning icons on E- Map represent cameras and I /O devices . T he se icons wi ll turn red once they are t riggered by alarms . To launch the E -Map applic[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 93 - Edit mode/ Operat e mode Switch button Function button 6.1 Edit Mode All E-map modifica tions must be configured i n Edit M ode. 6.1.1 Add/Edit/Delete Ma p Add E-Map: Step 1 : Click on t he switch button t o switch to Edit mode. Make sure all de vices are connec ted and setup properly. [...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 94 - Operate mode/ Edit m ode Switch button 6.1.2 Add/Rotate/ Delete Device Indicator Add Indicator: Step 1: Make s ure you are in Edit mode and all devices are connected and in serted . Step 2: Click on t he “ Map ” icon to go to t he desired map l ayer. Step 3 : Please make sure the ma[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 95 - Triangular indicator 6.2.2 E-Map pictur e This window will show the map layer and i ndicators. Device Indicator: Select device i ndicators from t he Device and M ap Tree list for related infor mation and to preview video . Map indicator: Selecting a map indicator wi ll bring you to th a[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 96 - 7. Log Viewer *IP CamSecure Lite only has System Log option in Log Vi ewer . View the history and export reports of unusual eve nts det ected by the Smart Guard S ystem. To launch Log View er, simply cli ck on Config and select L og Viewer from the menu.[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 97 - Step1 Step2 Step3 7.1 Unusual Event Step1 : Choose t he type of events yo u wish to view or select All from the drop- down menu to view all. The type s of Unusual Events incl ude General Mot ion, Foreign Object, Mi ssing Object, Focus Lost, Cam era Occlusion, Signal Lost, Disk Space Exh[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 98 - 7.2 System Log Step1: Choose t he type of event you wan t to check or select All from t he drop-down men u for all types of events. Select Log Type form the drop -down menu. There a re in total 31 t ypes of log types, including: * Note: Detecti on of some system logs is not available un[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 99 - 7.3 Counting Appli cation * Note: This functi on is not avail able under Lite l icense. Displa y the history of Counti ng Applicati on during a given time period. Step1: Select t he channel you want to check or select All from th e drop-dow n menu for all channels. Step 2 : Select searc[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 100 - 7.4 Counting Appli cation (Diagram) * Note: This functi on is not avail able under Lite l icense. Di splay the Counting App lication dat a in diagram format. Step1: Select t he channel you want to check or select All from th e drop-dow n menu for all channels. Step 2: From the drop -do[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 101 - 7.6 Export After each log search, export needed info t o .xls or .txt files. Step1: Press the b utton Export to . Step2: Type the fi le name and choose th e file format (.xls or .txt). Step 1 .xls .txt[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 102 - 8. Backup The backup function sav es record ed video and o ther log informat ion. Backup fil es may be reloaded on any PC with the Playback System installed. Follow the instructions below for more information on obta in ing backup files.[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 103 - 8.1 Backup Rec orded files Step 1: Add (Remote) Backup Site: Press t he “Remote Se r ver ” button to go to remote backup sit e management to add and setup th e backup site.  Enter the IP address or D NS, Port, Username , and Password.  Click Add to add t he server.  Click [...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 104 - Step 9: Click t he Backup icon t o obtain Backup panel. Step 10: Summar y : Check the summary secti on to see the size of t he file(s). Step 11: Media : Choose t he path you want to save the file or burn t he file into a CD (direct CD b urning for Windows XP only ), DVD or on Hard D is[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 105 - 9. Remote Live Vi ewer With the Remote Live V iewer console , remote users may wat ch up to 128 cha nnels real -ti me video from remote live st reaming servers. *There is only 1 channel displayed in Live Viewer in IP CamSecure Lite while there are up to 16 channels displayed in IP CamS[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 106 - Server List General Setting 9.1 Setting Click General Sett ing to obtain setting dialog. 9.1.1 General Setting Audio preview:  Enable audio on act ive channel: Select t o enable audio streami ng on active ch annel. Miscellaneous:  Synchronize video fra mes: Select to avoid ima ge[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 107 - 9.1.3 Group Setting Allocate different cameras int o each appointed group. * Note: Camera s under Lite l icense cannot b e included in a group wit h other servers. Step 1: Log in t o all the servers tha t contain the camera (s) you would like to put into the group(s). Step 2 : Click In[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 108 - Stream profile : List di ffers according t o different t ypes of video input s and licenses. Auto: The system w ill adjust t he stream type automa tically to fit di fferent screen division s . Recoded: The sy stem wil l follow the stream p rofile set in Ma in Console >Schedule > [...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 109 - 9.1.7 Monitor Display Setting Activate auto scan t o rotate the chan nels/ cameras on screen. *The dual monitor is only in IP CamSecur e Pro/Pro Plus. Note :  For instance, you may sel ect to show only 4 sub- screens on the l ive viewer while having 16 channel s connected t o the sy[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 110 - Status display:  Show recording sta tus: Select it to show the crystal b all with recording st atus on monitor display.  Show camera even t: Select it to show the smart guard detect ed event appoint ed in Main Console on each channel . Note: To execut e this function, need setup [...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 111 - Log In/Log Out Ser ver Connect/Disconne ct Camera 9.2.1 login/logout server Option1: Select a server on the list and c lick on LOG IN/ LOG OUT to access/ log out the server. Option2: On t he server list, right cli ck to obtai n menu options. 9.2.2 Connect/Disconne ct camera Option1: On[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 112 - 9.3.2 Zoom Click on the + and – signs t o zoom in and zoom out the view. 9.3.3 Focus You can select to have the camera focused near or far. To foc us near means object s that a re closer will be clearer tha n the objects that are further a way. On contrast, to focus far m eans object[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 113 - Start Monitor To browse recorded video By simply clickin g on the t imeline you can vi ew the video . Use t he navigation t ools below for advanced control. - Play / Pause / Stop - Speed up/Speed do wn - Fast Forward/reverse f rame by frame - Play Previous / Next m inute video To keep [...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 114 - 9.5.3 I/O Control Select t o obtain the I/O control p anel . Use the panel to view DI status and cont rol DO devices remotel y. Note: Adjust th e setting of I/O device i n Main console – Config – Setting - I /O Device first, the I/O control panel will display t he device status bas[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 115 - 10. Web View *There is only 1 chann el displayed in Live Vi ewer via web bro wser in IP Ca mSecure Lite while there are up to 4 channels dis played in IP CamSecur e Pro simultane ously. Note: Make sure the Li ve Stream Serve r is enabled. Check 5.14 N etwork Service for mor e detail. 1[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 116 - 11 . Utilities A. Veri fication Tool B. License Managemen t Tool C. Resource Management Tool D. DB Tool[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 117 - A. Verification To ol The Verificat ion Tool verifies wheth er the data created by t he system has been t ampered wit h. It is the process by whi ch a digit al watermark (a digit al signature) is added to ea ch recorded video frame to ensure it s authenticit y. There are 3 types of dat[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 118 - Watermark Verification report 1.3 Verify Image/Vide o Step 1: Select single or multi ple files for verificat ion. Step 2: Click “ verify ”to start verific ation. Step 3: The verific ation result w ill show on t he watermark column . If a file wa s tampered with, it will show . If a[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 119 - B. License Managem ent Tool The license of the so ftware should be registered b efore you st art using the I ntelligent Surveill ance System. Execute th e License Management Tool to ac tivate the l icense from dongle or seri al number in cluded w ith the softw are package, or de -activ[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 120 - Transfer 1.2 Activate/Transfer Lic ense 1.2.1 Activate Licens e Activation Onlin e Step 1: Open Licen se Manager To ol. Step 2: Select On line as Activate t ype. Step 3: Input the SN ( Seria l number)or Imp ort SN file, and then cl ick on Activate button. Step 4 : Restart Main Console [...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 121 - Step 4: Save Request file, and t hen take it to another PC that is connected to the Internet . Step 5: Exec ute OffLineTool.exe in the oth er PC . In put the SN (Serial number) or Import SN file, and then click on A ctiva te button. Step 6: Save Licens e file, and th en take it to orig[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 122 - Transfer Offline Step 1: Open Licen se Manager To ol. Step 2: Select Transfer Tab, and then check Offli ne as Transfer type . Step 3: Select SN, and then cli ck Transfer butt on to transfer SN. Step 4 : Save Request fi le. Restart Main Console if t ransfer is successful .. Step 5 : Cop[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 123 - C. Resource Manage ment Tool The Resource Managem ent Tool detec t s whether the system is operat ional . Note: For further a pplication of th e Resource Mana gement Tool, please ref er t o page 58 I n “Guard” chapt er. 1.1 Execute Resource Management t ool Step 1: Open Re source R[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 124 - 1.3 Advanced Resour ce Report Click the Advanced button to search a nd export system l ogs in “Search” ta b and obtain the history diagram of an specified period i n “Diagra m” tab. 1.3.1 Search Step 1: Choose th e system event t ype, and then select the st andard percentage to[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 125 - 1.3.2 Display Step 1: Choose th e system event t ype. Step 2 : Select t he Date/Time t o draft history diagra m. Step 3 : Setup the st art time and d uration for charting . User can ch oose “One D ay”, “One Hour” or “ One Minute” as t he duration. Step 4: Click “ Display [...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 126 - D. DB Tool The DB Tool repai rs database files an d Export configurat ions. War ning : improper use of this DB Tool may ca use loss of rec orded video. Step 1: Exec ute DB Tool from progra m files. Step 2: Enter t he password of administ rator to log in. 1.1 Repair Database This page h[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 127 - Step 3 : For add dat abase location, please cl ick on button a nd use URL to choose l ocation. For remove dat abase location, please ch oose location form li st and click on button to remove locat ion. Step 4 : Click on M odify button t o modify location. After modifi cation, the Modif[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 128 - Step 2 : Select t he repair Met hod as Modify Location. Step 3 : Check t he video location w indows. The system wi ll list all video locations in t able, but if there a re any omit, please use to insert . Note: After insertin g location, the system w ill show files count below table. S[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 129 - 1.2 Export Configurations This tool is us ed w hen user want s to export all system configuration s to backup, tak e to another PC for technical t rouble shooting. Step 1: Press “Export ”. Step 2 : Select t he location you want to Export and type the n ame of the configurations. St[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 130 - Appendix A - 3GPP Service How to setup 3GP P streaming connect ion (using BenQ -Siemens m obile phones) System Configuration DVR / NVR server v 2.6 CPU: Intel core2 Duo 1.86 GHz Memory: 512 DDR R A M Ethernet: Realtek RTL8168/8111 PCI- E Hard Disk: 160GB Graphic card: ASUS Extreme A X5[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 131 - 1.2 Configuration fro m 3G Mobile Phon e 1.2.1 BenQ-Sie mens E81 Step 1: Go to Menu , then Internet Step 2 : Select Bookma rks Step 3 : Add New Bookmark Step 4: Configure t he Adress settin g as the followi ng example. Ex: rtsp://61.216.97 .69:554/ media 00 .3gp 61.216.97.69 :554 is th[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 132 - 1.2.2 BenQ P50 Step 1: Connect GPRS Step 2: Downl oad and instal l the [PLATFORM4] softwa re. Step 3: Exec ute the Main Console. Step 4: Press the [ Config]  [Netw ork Service]  [Start] Step 5: Open [PL ATFORM4] , press the button fram ed by red into Option Step 6: [Open U RL ] e[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 133 - Appendix B – PDA / Smart Phone Client PDA / SP (Smart Phone ) Client a re only applied for devices w ith Window s Mobile 5.0 platform or above . See the secti ons below to find how to install and execute PD A / SP Client. Note: 1. The different betw een Smart Phone and PDA Client is [...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 134 - 1.2.2 Execute and Log in Step 1 : Make sure yo ur PDA/Smart Phone device i s connected to net work, and then go to Start - Programs - PDA/Smart Phone Client t o execute appl ication. Step 2 : Insert A ddress , Port, Name and Passw ord of the server an d click on t o login. 1.3 PDA/Smar[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 135 - Displays all “ snapshots” of chann els connected t o server as camera list. Click on i ndicated snap shot to get the chann el information, and then click on to display live vi deo. Note: The Screen Divi sion and Refresh opt ion could help to quick find th e channel. Live Video Disp[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 136 - 1. 3.2 I/O Control Select “I/O Cont rol” button to monitor sta tus of DI/DO devices , and control DO devi ces. I/O Device list: Select and monit or the device connected w ith Server. DI/DO status: Monitor t he DI/DO status synchronized w ith Server, an d then click Output button to[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 137 - Appendix C – i Phone Browser Live Streaming servic e c an ha ndle requests f ro m i Phone ’ s Safari brow ser. This section w ill guide you ho w t o use this feature wi th i Phone devices. 1.1 Configuration fro m Main Cons ole server Step 1: Go to “ Config ” and sel ect “ Net[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 138 - Appendix D - R emote Desktop To ol How to inst all Remote Desktop Tool Step 1: Insert the Installation CD. Step 2: Go to Rem ote Desktop V iewer directl y and Run Setup.exe file. How to Start Remot e Desktop Tool Step 1 : Start - All Programs - Remot e Desktop Viewer - Remote Deskt op [...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 139 - Appendix E – iPhone App “ iCamSecure ” Description LevelOne “ iCamSecure ” is a totall y free app for iPad, iPhone and iPod touch that enables you to monitor remotel y live video camera t hrough LevelOne IP CamSecure Survei llance Lit e/Pro Mega Systems. Easily view mult iple[...]

Intelligent Surveillance Solution LevelOne IP CamSecure - 140 - Appendix F – Device Pack Device Pack is relea sed to support new cameras. Always get th e latest version of Device Pack t o ensure your IP CamSecure s ystem support c urrent implementing camera s. You can find t he Device Pack version oh the red area: Notice 1.) the Device Pac k only[...]