LG Electronics ME20CR manual

www .lg.com O WNER’S MANU AL L CD MONIT OR L CD MONIT OR MODEL ME20CR Please read this manual caref ully befor e operating your se t and re tain it f or futur e ref erenc e. ENGLISH[...]

1 Important Precautions This unit has been engineered and manufactured to ensure your personal safety, however improper use may result in potential electrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this display, observe the following basic rules for its installation, use, and servicing. On Sa[...]

2 Important Precautions On Installation Do not allow anything to rest upon or roll over the power cord, and do not place the display where the power cord is subject to damage. Do not use this display near water such as near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. Displays are provided with ventila[...]

Important Precautions 3 On Cleaning Unplug the display before cleaning the face of the display screen. Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display screen because over-spraying may cause electrical shock. When cleaning the product, unplug the power cord and scrub gently with a soft cloth to prevent scratching. [...]

4 Accessories !!! Thank you for selecting LGE products !!! Please make sure the following items are included with your monitor . If any items are missing, contact your reseller . NOTE This accessories may look different from those shown here. User must use shielded signal interface cables (DVI-D cable) with ferrite cores to maintain standard compli[...]

5 Connecting the Display Slot Stand Base Hook Stand Body WARNING The tape and locking pin may only be removed from those monitors equipped with a standing base when the base is pulled up. Otherwise, you may be injured by the protruding sections of the stand. Product Handling with Care : When you lift up or move the product, Do Not hold or touch the[...]

6 Connecting the Display IMPORTANT This illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture. Do not carry the product upside down holding only the stand base. The product may fall and get damaged or injure your foot. 5 . Attach the monitor to the Stand Base by turning the screw to the ri[...]

7 Connecting the Display Height Range : maximun 100.0 mm (3.94 inch) 100.0 mm * Please be sure to remove the Locking pin to adjust the height. WARNING You do not need to replace the Locking pin after it is removed, to adjust its height. Before setting up the monitor , ensure that the power to the monitor , the computer system, and other attached de[...]

-The pivot function allows you to rotate the screen 90 degrees clockwise. 1. Lift the monitor to its highest height to utilize the Pivot function. 2. Landscape & Portrait : You can rotate the panel 9 0 o clockwise. Please be cautious and avoid contact between the monitor head and the Stand Base when rotating the screen to access the Pivot funct[...]

9 Connecting the Display 3. Press button on the front switch panel to turn the power on. When monitor power is turned on, the 'Self Image Setting Function' is executed automatically. (Only Analog Mode) NOTE This is a simplified representation of the rear view. This rear view represents a general model; your display may differ from the vie[...]

10 Control Panel Functions Front Panel Controls MENU Button Use this button to enter or exit the On Screen Display. OSD LOCKED/UNLOCKED This function allows you to lock the current control settings, so that they cannot be inadvertently changed. Press and hold the MENU button for several seconds. The message "OSD LOCKED" should appear. You[...]

11 Control Panel Functions Use this button to turn the display on or off. Power Button EXIT Button Exit the OSD(ON Screen Display). From front view, the power indicator stays blue if the display is running properly (On Mode). If the display is in Sleep Mode (Energy Saving), this indicator color changes to amber. Power Indicator[...]

12 On Screen Display (OSD) Control Adjustment Screen Adjustment Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adjus[...]

13 NORMAL MOVIE INTERNET On Screen Display(OSD) Selection and Adjustment The following table indicates all the On Screen Display contr ol, adjustment, and setting menus. LANGUAGE POWER INDICATOR WHITE BALANCE FACTORY RESET To customize the screen status for a user's operating environment OTHERS HORIZONTAL VERTICAL CLOCK PHASE AUTO DISPLAY To a[...]

14 On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. Sub- menus NOTE OSD (On Screen Display) menu languages on the monitor may differ from the manual. Menu Name[...]

15 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description : Move to the upper menu : Decrease : Increase : Select another sub-menu BRIGHTNESS CONTRAST SHARPNESS To adjust the brightness of the screen. To adjust the contrast of the screen. To adjust the clearness of the screen. D-SUB/DVI-D input NOTE If you want to exit, sele[...]

16 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description PRESET Select the screen color. • WARM : Slightly reddish white. • MEDIUM : Set the screen color to fit the sRGB standard color specification. • COOL : Slightly bluish white. RED Set your own red color levels. GREEN Set your own green color levels. BLUE Set your[...]

17 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description CLOCK PHASE AUTO To minimize any vertical bars or stripes visible on the screen background. The horizontal screen size will also change. To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of character[...]

18 On Screen Display(OSD) Selection and Adjustment Press the , buttons to reset immediately. Main menu Sub menu Description To choose the language in which the control names are displayed. LANGUAGE WHITE BALANCE If the output of the video card is different the required specifications, the color level may deteriorate due to video signal distortion. [...]

19 On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. Sub- menus NOTE OSD (On Screen Display) menu languages on the monitor may differ from the manual. Menu Name[...]

20 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description D-SUB/DVI-D input Select this when you want to use the product in the most general using environment. Select this when you are watching a video or movie. NORMAL MOVIE EXIT : Exit , : Move / Select Select this when you are working on the document (Word etc.) INTERNET[...]

21 T roubleshooting No image appears Check the following before calling for service. No image appears Is the power cord of the display connected? Is the power indicator light on? Is the power on and the power indicator blue or green? Is the power indicator amber? Do you see an "OUT OF RANGE" message on the screen? Do you see a "CHECK[...]

22 T roubleshooting Display image is incorrect ● Display Position is incorrect. ● On the screen background, vertical bars or stripes are visible. ● Any horizontal noise appearing in any image or characters are not clearly portrayed. • Select AUTO function to adjust your display image to the ideal setting. If the results are unsatisfactory, [...]

23 T roubleshooting Display image is incorrect ● The screen color is mono or abnormal. ● The screen blinks. • Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. • Make sure the video card is properly inserted in the slot. • Set the color setting higher than 24 bits (true color) at Control Panel -[...]

24 Specifications 51.054 cm (20.1 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 51.054 cm 0.255 mm x 0.255 mm (Pixel Pitch) Display Horizontal Freq. 28 kHz to 83 kHz (Automatic) Vertical Freq. 56 Hz to 60 Hz (Automatic) Input Form Separate Sync SOG (Sync On Green) , Digital Sync Input Signal Input D-SUB Connector[...]

25 Specifications Preset Modes (Resolution) Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) 1 2 3 4 5 6 7 *8 640 x 480 640 x 480 720 x400 800 x 600 1024 x 768 1280 x 1024 1600 x 1024 1600 x 1200 31.47 37.50 31.46 37.88 48.36 63.98 62.11 75.00 59.94 75.00 70.08 60.32 60.00 60.02 60.00 60.00 Indicator On Mode Sleep Mode Off Mode[...]

26 Installing the W all mount plate This monitor satisfies the specifications of the W all mount plate or the interchange device. Wall mount plate (Separate purchase) - Be sure to use screws and a wall mount that meet VESA standards. - Using screws longer than those recommended might damage the product. - Using screws that do not meet VESA standard[...]

Make sure to read the Safety Precautions befor e using the product . Keep the OWNER’S MANU AL CD) in an acces sible place f or furture ref erence. The model and serial number of the SET is located on the back and one side of the SET . Rec ord it below should y ou ever need ser vice. MODEL SERIAL[...]