LG Electronics STB1000 manual

© Copyright 201 1, LG Electronics U.S.A., Inc. P/N: 206-4147 (Rev A) STB1000 HD Commercial Interface Set-top Box for use in Lodging Environments Installation & Setup Guide W arranty[...]

2 206-4147 W ARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE P AR TS INSIDE. REFER T O QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s en[...]

3 206-4147 IMPORT ANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer ’ s instructions. 8. Do not install near a[...]

4 206-4147 IMPORT ANT SAFETY INSTRUCTIONS (Continued from previous page) 20. Grounding Ensure that you connect the earth ground wire to prevent possible electric shock (i.e., an STB with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet). If grounding methods are not possible, have a quali fi ed electrician insta[...]

5 206-4147 Safety W arnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Important Safety Instructions . . . . . . . . . . . . . . . . . . . 3 – 4 T able of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Setup Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 STB1000 Rear an[...]

6 206-4147 Setup Checklist Installation and Setup __ Unpack the STB1000 and all accessories. Accessories provided: • 6 ft AC power cord • 5 ft RS-232C-F to RS-232C-F null-modem cable with 3.5 mm stereo plug • 5 ft RS-232C-M to RS-232C-F straight-through cable • 5 ft HDMI to DVI-M cable • 1 ft DVI-F to HDMI adapter cable • 5 ft Audio cab[...]

7 206-4147 DIGIT AL VIDEO OUT AC IN AC OUT MAX 8A 960W USB SERVICE ONL Y A V IN 2 VIDEO L/MONO -AUDIO- R AUDIO OUT INT PILLOW PILLOW SPEAKER ANT DISPLA Y IR IN IR RECEIVER IN AC 120V~ 60Hz COMPONENT IN VIDEO AUDIO R L UPDATE RESET AUDIO (RGB/DVI) P B Y P R ..... .... .......... 2 1(DVI) DIGITAL VIDEO IN OPTICAL DIGITAL AUDIO OUT REMOTE CONTROL OUT [...]

8 206-4147 COMPONENT IN VIDEO AUDIO R L UPDA TE RESET AUDIO (RGB/DVI) P B Y P R ..... .... .......... 2 1(DVI) DIGIT AL VIDEO IN OPTICAL DIGIT AL AUDIO OUT REMOTE CONTROL OUT SPEAKER OUT 8 RJP INTERF ACE RGB IN VIDEO R -A UDIO- L/MONO A V IN 1 RGB(PC) ..... ..... ..... T V-LINK CFG MPI/GAME CONTROL DISPLA Y CONTROL LAN .......... COMPONENT IN VIDEO[...]

9 206-4147 POWER STATUS STB1000 DIGITAL VIDEO OUT AC IN AC OUT MAX 8A 960W USB SERVICE ONLY AV IN 2 VIDEO L/MONO -AUDIO- R AUDIO OUT INT PILLOW PILLOW SPEAKER ANT DISPLAY IR IN IR RECEIVER IN AC 120V~ 60Hz STB1000 V ent Holes V entilation The STB1000 generates heat during operation and needs to be provided with adequate ventilation to assure contin[...]

10 206-4147 STB1000 Cabling Connections Refer to the cabling diagram below , and complete the procedure on page 1 1 to connect the STB1000 to a compatible LG display panel. . . . . . . . . . . . . . . . . . . . . . . . . DIGIT AL VIDEO OUT AC IN AC OUT MAX 8A 960W USB SERVICE ONL Y A V IN 2 VIDEO L/MONO -AUDIO- R AUDIO OUT INT PILLOW PILLOW SPEAKER[...]

11 206-4147 STB1000 Cabling Connections (Cont.) 1. Use one of the supplied RS-232 cables—either the serial DB9-Female to DB9-Female null-modem cable or the DB9-Female to DB9-Male straight-through cable, depending on display panel requirements—to connect the DISPLA Y CONTROL connector on the STB1000 jack panel to the RS-232 IN connector on the L[...]

12 206-4147 STB1000 Installer Remote The LG Installer Remote is supplied with and dedicated to operate the STB1000. See next page for typical key functions. Some DVD and VCR controls may be available for selected LG DVD/VCR products. + AAA AAA + Installing Batteries in Installer Remote • Open the battery compartment cover on the back side of the [...]

13 206-4147 Installer Remote Control T ypical Key Functions 1 2 3 4 5 6 7 8 9 0 ABC DEF GHI JKL MNO PQRS TUV WXYZ PIP CH- PIP CH+ PIP SW AP PIP INPUT PIP SAP FLASHBK REMOVE ALPHA/NUM P A G E MUTE TIMER MENU RETURN VOL CH POWER GUIDE INPUT CC ENTER TV DVD VCR STB &@ .:/, RA TIO PORT AL INFO i NUMBER Buttons (0 – 9) & DASH Use to enter a pr[...]

14 206-4147 Important: Pro:Centric operation requires that Installer Menu item 1 19 DA T A CHANNEL be set appropriately and that the STB1000 be in PPV or FTG Mode. The interactive Pro:Centric STB enables guests—from the comfort of their rooms—to view and select from a complete listing of hotel/institution services and amenities. The Pro:Centric[...]

15 206-4147 STB1000 Setup Menus CHANNEL PICTURE AUDIO INPUT OPTION L OCK TIME USB PICTURE Enter Move TIME Enter Move AUDIO Enter Move CHANNEL Enter Move INPUT Enter Move LOCK Enter Move OPTION Enter Move On-screen setup menus control the basic features of the STB1000/display . Press MENU on the Installer Remote to access the STB1000 setup menus. Se[...]

16 206-4147 Channel Setup Options Auto T uning (Channel Search) Auto T uning (Channel Search) Auto T uning automatically finds and stores all digital and analog channels available through antenna or cable inputs. 1. Press MENU on the Installer Remote, and use the arrow navigation keys to select/highlight the CHANNEL menu option. Then, press ENTER .[...]

17 206-4147 Channel Setup Options (Cont.) Manual T uning (Add/Delete Channels) / View Digital Signal Strength Manual T uning (Add/Delete Channels) Use this option to manually add active channels or remove unwanted channels. See also “Edit Channels” on the following page. 1. Press MENU on the Installer Remote, and use the arrow navigation keys t[...]

18 206-4147 Channel Setup Options (Cont.) Edit Channels / Channel Labels CHANNEL Enter Move Close Channel ANALOG 1 1-0 Logo PBS ► ► PBS Edit Channels Use this option to add or delete channels from the channel lineup. 1. Press MENU on the Installer Remote, and use the arrow navigation keys to select/highlight the CHANNEL menu option. Then, press[...]

19 206-4147 Picture Setup Options Aspect Ratio (Picture Size) Control PICTURE Enter Move RG ► Aspect Ratio : 16:9 Picture Mode : Standard • Backlight 90 • Contrast 90 • Brightness 50 • Sharpness 50 • Color 50 • T int 0 16:9 Just Scan Set By Program 4:3 Zoom Notes: • The RGB-PC input source can only use the 4:3 or 16:9 aspect ratio. [...]

20 206-4147 Picture Setup Options (Cont.) Picture Mode PICTURE Enter Move RG ► Aspect Ratio : 16:9 Picture Mode : Standard • Backlight 90 • Contrast 90 • Brightness 50 • Sharpness 50 • Color 50 • T int 0 Intelligent Sensor Vivid Standard Natural Cinema Sport Game Picture Mode This feature enables you to select a precon fi gured Pictu[...]

21 206-4147 Picture Setup Options (Cont.) Advanced Control Advanced Control 1. Press MENU on the Installer Remote, and use the arrow navigation keys to select/highlight the PICTURE menu option. Then, press ENTER . 2. Use the Up/Down arrows to select Advanced Control under Picture Mode, and then press ENTER . 3. In the Advanced Control pop-up window[...]

22 206-4147 Picture Reset This option restores the Picture Mode to factory default settings. 1. Press MENU on the Installer Remote, and use the arrow navigation keys to select/highlight the PICTURE menu option. Then, press ENTER . 2. Use the Up/Down arrows to select Picture Reset under Picture Mode, and then press ENTER . 3. At the prompt for con ?[...]

23 206-4147 Screen Auto Con fi guration This option automatically adjusts the picture position and mini- mizes image instability . 1. In the Screen Menu, use the Up/Down arrows to select Auto Con fi g , and then press ENTER . 2. Use the Left/Right arrows to select Ye s , and then press ENTER to initiate the auto adjustment. 3. After adjustment, i[...]

24 206-4147 Option Settings Menu Language / Audio Language Menu Language Use this option to select the language of on-screen menus. 1. Press MENU on the Installer Remote, and use the arrow navigation keys to select/highlight the OPTION menu option. Then, press ENTER . 2. Use the Up/Down arrows to select Menu Language , and then press ENTER . 3. In [...]

25 206-4147 OPTION Enter Move Menu Language : English Audio Language : English Caption : Off Set ID : 1 Demo Mode : Off Data Broadcasting Option Settings (Cont.) Captions Captions Use this option to select the appropriate mode for displaying captions. Caption text, if provided by the broadcaster , is avail- able for both digital and analog channels[...]

26 206-4147 Option Settings (Cont.) Set ID / Demo Mode Set ID 1. Press MENU on the Installer Remote, and use the arrow navigation keys to select/highlight the OPTION menu option. Then, press ENTER . 2. Use the Up/Down arrows to select Set ID , and then press ENTER . 3. In the Set ID pop-up window , use the Left/Right arrows to select the appropriat[...]

27 206-4147 Audio Setup Options Auto V olume / Clear V oice II / Balance Auto V olume Each broadcasting station has its own signal conditions, which may result in different volume levels for dif ferent programs/ channels. This option enables the STB1000 to make automatic adjustments to maintain a consistent volume level between channels. It also en[...]

28 206-4147 Audio Setup Options (Cont.) Sound Mode Sound Mode This feature enables you to select a preset Sound Mode option and/or customize sound settings manually . 1. Press MENU on the Installer Remote, and use the arrow navigation keys to select/highlight the AUDIO menu option. Then, press ENTER . 2. T o select a preset Sound Mode option: • U[...]

29 206-4147 Audio Setup Options (Cont.) Audio Reset / TV Speaker / Secondary Audio Program (SAP) Setup Audio Reset This option restores the Sound Mode to factory default settings. 1. Press MENU on the Installer Remote, and use the arrow navigation keys to select/highlight the AUDIO menu option. Then, press ENTER . 2. Use the Up/Down arrows to selec[...]

30 206-4147 T ime Setup Options Set the STB Clock / STB On and Off Time Settings Set the STB Clock The STB1000 clock is set automatically from a digital channel signal. The signal includes clock information provided by the broadcasting station. Y ou can also set the clock manually if the auto clock function does not set the current time correctly .[...]

31 206-4147 Sleep Timer 1. Press MENU on the Installer Remote, and use the arrow navigation keys to select/highlight the TIME menu option. Then, press ENTER 2. Use the Up/Down arrows to select Sleep Timer , and then press ENTER . 3. In the Sleep T imer pop-up window , use the Up/Down arrows to select the desired number of minutes before the STB/dis[...]

32 206-4147 Lock Setup Options Lock System Overview / Enable or Disable the Lock System Lock System Overview Parental Control can be used to block individual channels, programs with speci fi c ratings or in speci fi c categories, and external viewing sources. It is also possible to block all program viewing for a time period. The Parental Control[...]

33 206-4147 Lock Setup Options (Cont.) Set Password / Channel Blocking LOCK Enter Move Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block Set Password Use the following procedure to set a new password for the Lock System. 1. Press MENU on the Installer Remote, and use the a[...]

34 206-4147 Lock Setup Options (Cont.) Movie Rating / TV Rating-Children Movie Rating (MP AA) (for USA) This option blocks movies according to movie ratings limits. Y ou can set the ratings limit by blocking out all movies with ratings above a speci fi ed level. Note that the movie ratings limit only applies to movies shown on TV , not TV programs[...]

35 206-4147 TV Rating-General (for USA) This option blocks TV programs based on US ratings. 1. Press MENU on the Installer Remote, and use the arrow navigation keys to select/highlight the LOCK menu option. Then, press ENTER . 2. If prompted for it, enter the Lock System password. 3. Use the Up/Down arrows to select TV Rating-General , and then pre[...]

36 206-4147 LOCK Enter Move Lock System : Off Set Password Block Channel TV Rating-English TV Rating-French Downloadable Rating Input Block E C C8+ G PG 14+ 18+ Blocking Off Blocking off : Permits all programs • E: Exempt • C: Children • C8+: Children eight years and older • G: General audience • PG: Parental Guidance suggested • 14+: V[...]

37 206-4147 Downloadable Rating This option is available only for digital channels and operates only when the STB has received Region 5 rating data. 1. Press MENU on the Installer Remote, and use the arrow navigation keys to select/highlight the LOCK menu option. Then, press ENTER . 2. If prompted for it, enter the Lock System password. 3. Use the [...]

38 206-4147 Select the Input Source 1. Press MENU on the Installer Remote, and use the arrow navigation keys to select/highlight the INPUT menu option. Then, press ENTER . 2. Use the Up/Down arrows to select the appropriate input source (see descriptions below). Then, press ENTER . 3. Press MENU to return to TV viewing, or press RETURN to return to[...]

39 206-4147 Overview This document describes how to set up the STB1000 for Commercial Mode either while in the Embedded b -LAN™ (EBL) module’s Pass-through Mode or its Free-T o-Guest (FTG) Mode. Note: The b -LAN module is internal to the STB1000 and allows the institution head end equipment to communicate with the STB for configuration and cont[...]

40 206-4147 Commercial Mode Setup for Master STB1000 T ypical STB1000 Installer Menu Adjust the settings for these Installer Menu items. 1. Set Installer Menu items. This step provides speci fi c instruction only on the Installer Menu items that should be set on a Master TV . Refer to pages 43 to 48 for detailed information on all Installer Menu i[...]

41 206-4147 After verifying the STB Setup, set Installer Menu item 028 CH. OVERIDE to 000.* Commercial Mode Setup for Master STB1000 (Cont.) DIGIT AL WXYZ MONO STEREO SAP 19-3 Custom T ext Label “WXYZ” created in 2-5-4 + MENU (Add Channel Label) Mode. (Continued from previous page) 3. Run Auto T uning (Channel Search). a) Search for all availab[...]

42 206-4147 Installer Menu T ypical STB1000 Installer Menu Use the Installer Menu to set up or change operational settings. Refer to the table starting on the next page for brief descriptions of Installer Menu items. More detailed descriptions follow the table listing. Accessing the Installer Menu 1. Make sure the STB1000/display panel is ON. 2. Us[...]

43 206-4147 Installer Menu (Cont.) Installer Menu Items 000 through 071 Menu Item Function V alue Range Default V alue Brief Description of Function and Comments 000 INST ALLER SEQ 0 ~ 3 0 Leave default set to 0. 001 POWER MANAGE 0 ~ 7 0 Sets number of hours of no activity before automatic shutoff. 002 AC ON 0 / 1 0 Set to 1 to enable Auto T urn ON[...]

44 206-4147 Installer Menu (Cont.) Installer Menu Items 073 through 1 19 Menu Item Function V alue Range Default V alue Brief Description of Function and Comments 073 CH NOT A VBLE 0 / 1 0 If set to 1 and Channel Override is 0, “NOT A V AILABLE” message is displayed when directly accessing a channel not in the favorite Channel List. 075 REVERT [...]

45 206-4147 Installer Menu (Cont.) Detailed Descriptions of Installer Menu Items 000 - INST ALLER SEQUENCE Speci fi es entry sequence to the Installer Menu. 0 = 9876 1 = 4321 2 = 1478 3 = 3698 001 - POWER MANAGE (Power Management) Determines hours of no activity before automatic shutoff. The Power Management function is for saving energy . If set [...]

46 206-4147 Installer Menu (Cont.) 016 - EN TIMER (Enable On/Off Timers) * If set to 1, the T imer function is available to the end user and enabled continuously . Set to 0 to disable On/Off Timers. Note: Clock must be set in order to use timers. 017 - ALARM * Gives the installer the option of making the Alarm function avail- able to the end user .[...]

47 206-4147 Installer Menu (Cont.) 070 - FOR. CH-TIME (Channel-Time Display Foreground Color) Set according to Color Chart: 0 = Black 3 = Cyan 6 = Y ellow 1 = Blue 4 = Red 7 = White 2 = Green 5 = Violet Note: Applies only to “Channel Not Available” message if item 073 is set to 1 (enabled).If foreground color and background color are the same, [...]

48 206-4147 Installer Menu (Cont.) • 6 = Scaler Model RJPs: DVI Mode Enables RJP feature for use with reduced cable bundle models. In this mode, when an HDMI/DVI source is connected to the RJP , only digital video is expected via the HDMI cable. Analog audio is provided via separate cable, from the source, connect- ed to an RJP AUDIO IN. If no an[...]

49 206-4147 Adding Channel Label Icons / Custom Channel Labels (2-5-4 + MENU Mode) Changing a Channel’ s Icon on the Master STB1000 1. Use Channel Up/Down to select the desired channel. 2. Use the Left/Right arrow keys to select the thin letter “ I ” on the Channel ID display . 3. Use the Up/Down arrow keys to select the icon with which you w[...]

50 206-4147 Use one of the following options to Learn and T each the Master STB1000 Setup: • Using a USB memory device • Using a TLL-1 100A clone programmer • Using a L T2002 clone programmer Each option is described in further detail on the pages that follow . As you perform cloning proce- dures, be sure to complete each task as indicated. I[...]

51 206-4147 Cloning Procedures Learning / T eaching a Master STB1000 Setup using a USB Memory Device Learn Setup from Master STB1000 1. Ensure the Master STB1000 is set up completely and the EBL is in Pass-through Mode. 2. Plug the USB memory device into the USB port on the Master STB1000 rear panel. 3. Press MENU on the Installer Remote to display[...]

52 206-4147 Cloning Procedures (Cont.) Learning / T eaching a Master STB1000 Setup using a TLL-1 100A Clone Programmer W arning: Do not connect a clone programmer to the STB1000 MPI/GAME CONTROL port while the STB is in LodgeNet PPV Mode, as this will damage the clone programmer . CLONE SELECTION MENU Selected Bank: CBankX Saved (1) LEARN FROM TV ([...]

53 206-4147 Learn Setup from Master STB1000 1. Ensure the Master STB1000 is set up completely and the EBL is in Pass-through Mode. 2. If an analog channel is not available, direct tune the Master STB1000 to an Aux source, or select an Aux source, such as A V -1, from the Input Menu. Then, plug one end of the MPI cable into the MPI port on the STB j[...]

54 206-4147 Cloning Procedures (Cont.) Learning / T eaching a Master STB1000 Setup using a TLL-1 100A Clone Programmer (Cont.) T each Master STB1000 Setup to T arget STB1000 1. Ensure the T arget STB1000 EBL is in Pass-through Mode, and then use the Installer Remote to enter the T arget STB Installer Menu: Press MENU repeatedly until the on-screen [...]

55 206-4147 Cloning Procedures (Cont.) Learning / T eaching a Master STB1000 Setup using an L T2002 Clone Programmer Cloning is accomplished using the STB/clone programmer MPI ports for communication (see diagram). L T2002 Cloning Notes • Read the IMPORT ANT CLONING INFORMA TION on page 50 before beginning any cloning procedures. • A slow fl a[...]

56 206-4147 Cloning Procedures (Cont.) Learning / T eaching a Master STB1000 Setup using an L T2002 Clone Programmer (Cont.) Learn Setup from Master STB1000 1. Ensure the Master STB is set up completely and the EBL is in Pass- through Mode. 2. If an analog channel is not available, direct tune the Master STB1000 to an Aux source, or select an Aux s[...]

57 206-4147 Cloning Procedures (Cont.) Learning / T eaching a Master STB1000 Setup using an L T2002 Clone Programmer (Cont.) T each Master STB1000 Setup to T arget STB1000 1. Ensure the T arget STB1000 EBL is in Pass-through Mode, and then use the Installer Remote to enter the T arget STB Installer Menu: Press MENU repeatedly until the on-screen se[...]

58 206-4147 FTG Mode of Operation FTG Con fi guration Overview The following steps outline local FTG configuration of individual STB1000s. Since these models are equipped with the EBL module, they can also be broadcast configured in FTG Mode by a Free-T o-Guest Management Appliance (FMA) head end device. Refer to the Free-To-Guest (FTG) Configurat[...]

59 206-4147 CHANNEL PICTURE AUDIO TIME INPUT USB OPTION LOCK STB Setup Menus Shows that the EBL is in Pass-through Mode . Function Menu Shows that the EBL is in FTG Mode . While this menu is present on-screen, Installer Menu settings can ONL Y be accessed/changed using the FTG Configuration Application. FTG Mode of Operation (Cont.) Determining the[...]

60 206-4147 FTG Mode of Operation (Cont.) FTG Channel Map Con fi guration Utility / FTG Channel Map Editor Overview DELETE Click to remove highlighted channel from FTG Channel Map. ADD After defining a new Logical Channel, click to add channel to the FTG Channel Map. The FTG Channel Map Editor shows a single Logical Channel’s Data and the FTG Ch[...]

61 206-4147 FTG Mode of Operation (Cont.) FTG Installer Menu Con fi guration Utility Overview LEARN Click to transfer Installer Menu settings from the PTC to the EBL and FTG Configuration Application. * INST ALLER DEF AUL TS Click to reset FTG Installer Menu items shown in the FTG Configuration Application to defaults. READ Click to transfer the I[...]

62 206-4147 Remote Jack Pack Setup RJP Available? If you will use a Remote Jack Pack (RJP) in your system, set Installer Menu item 093 RJP A V AILABLE appropriately (for example, on a legacy model RJP: HDMI Mode, set RJP A V AILABLE to 001). See Installer Menu detailed descriptions for further information. STB Connections Make these connections ONL[...]

63 206-4147 External Equipment Setup Digital Audio Optical Connections / Component Connections Digital Audio Optical Connections 1. Connect an optical cable between the OPTICAL DIGIT AL AUDIO OUT con- nector on the STB1000 jack panel and the digital audio input connector on the external Digital Audio Ampli fi er System. 2. Select the Optical Digit[...]

64 206-4147 .......... COMPONENT IN VIDEO AUDIO R L UPDA TE RESET AUDIO (RGB/DVI) P B Y P R ..... .... .......... 2 1(DVI) DIGIT AL VIDEO IN OPTICAL DIGIT AL AUDIO OUT REMOTE CONTROL OUT SPEAKER OUT 8 RJP INTERF ACE RGB IN VIDEO R -AUDIO- L/MONO AV IN 1 RGB(PC) ..... ..... ..... TV-LINK CFG MPI/GAME CONTROL DISPLA Y CONTROL LAN .......... . . . . .[...]

65 206-4147 External Equipment Setup (Cont.) Composite Connections L R VIDEO COMPONENT IN VIDEO AUDIO R L UPDA TE RESET AUDIO (RGB/DVI) P B Y P R ..... .... .......... 2 1(DVI) DIGIT AL VIDEO IN OPTICAL DIGIT AL AUDIO OUT REMOTE CONTROL OUT SPEAKER OUT 8 RJP INTERF ACE RGB IN VIDEO R -AUDIO- L/MONO A V IN 1 RGB(PC) ..... ..... ..... TV-LINK CFG MPI[...]

66 206-4147 Reference: Upgrading STB Software using a USB Memory Device Checking the Software V ersions Note: This function is not accessible while the TV is in FTG or PPV Mode. Y ou can check the software versions of the STB by accessing the Installer Menu with the Installer Remote: Press MENU repeatedly until the on-screen setup menus lock up, an[...]

67 206-4147 Reference: Downloading a Splash Screen using a USB Memory Device Splash Screen Image File Guidelines • The splash screen image must be a 24-bit (RGB 8 x 8 x 8) BMP . • The image should be no larger than 3 MB. • The ideal resolution for the image is 1366 x 768 pixels. • The image fi le must be stored in a folder named “LG_DTV?[...]

68 206-4147 Reference: RS-232 Display Panel Requirements DB9 Male LG monitors/displays listed below require an RS-232 serial null-modem DB9 cable with female connectors at each end. 3-Wire Configuration (serial Female-Female null-modem cable) RS-232 Null Configuration DISPLA Y CONTROL RS-232 Pin Con fi guration (DB9 Male) NC 1 RXD 2 TXD 3 NC 4 GND[...]

69 206-4147 Reference: Display Panel T ype Speci fi cations The following table identifies the Installer Menu item 1 13 P ANEL TYPE setting for each of the compatible monitors/TVs listed in the “RS-232 Display Panel Requirements” Reference. P ANEL TYPE Setting Monitor/Display 0 1 2 3 4 M3203CCBA X M3204C X LD350C series X LD450C series X 55LD5[...]

70 206-4147 Reference: STB1000 Aux Input Con fi guration DIRECT ACCESS T uning STB ENABLE MPI DA T A ST ART AUX SOURCE ASSIGN- MENT Installer Menu MPI DA T A ST A TUS TYPE 0x41 SOURCES ENABLED (R/W) DA T A ST A TUS TYPE 0xD2 CURRENT A V SOURCE (R) D ATA S TAT U S TYPE 0x0D AUX SOURCE (R) OLD_ OCV = 0 OLD_ OCV = 1 Source Input Source Mode Number La[...]

71 206-4147 Reference: STB1000 Camport Auto Sense Operation The Camport Auto Sense function is enabled when: 1. Installer Menu item 034 CAMPORT EN is set to 1 AND 2. Installer Menu item 040 AUTO CAMPORT is enabled (1). Selectable : Can be accessed with INPUT key , direct access, etc. Auto Sense : STB switches to this input when connector is inserte[...]

72 206-4147 Reference: b -LAN Setup & Overview The control device at the head end, for example, an FMA-LG101 or a PCS150R, can control multiple STBs. When the STB1000 is first installed, it must be turned ON in order for the head end to be able to communicate with the b -LAN. At this point, if it is desired for the b -LAN to always be powered, [...]

73 206-4147 Reference: RJP Model List and Input Auto-sensing Hierarchy RJP Model List Legacy Models Scaler Models RJP-101M RJP-201M RJP-101ML N/A RJP-1 10F N/A RJP-1 10FW N/A RJP-1 10W N/A RJP-1 10WBR N/A RJP-1 10S N/A RJP-120G N/A RJP-120T N/A RJP-201B RJP-301B, RJP-401W RJP-202B N/A RJP Input Auto-sensing Hierarchy Priority Video Audio 1st (Highe[...]

74 206-4147 Reference: Programming the Installer Remote The Installer Remote can be programmed to operate most remote-controllable devices. Note that the Installer Remote may not control all models of other brands. 1. T est the remote to fi nd out whether it can operate other components without programming. For exam- ple, turn ON a component such [...]

75 206-4147 Reference: Remote Control Codes Brand Code(s) AIW A 034 AKAI 016, 043, 046, 124, 125, 146 AMPRO 072 ANAM 031, 033, 103 AUDIO DYNAMICS 012, 023, 039, 043 BROKSONIC 035, 037, 129 CANON 028, 031, 033 CAPEHART 108 CRAIG 003, 040, 135 CURTIS MA THES 031, 033, 041 DAEWOO 005, 007, 010, 064, 065, 108, 1 10, 1 1 1, 1 12 1 16, 1 17, 1 19 DA YTRO[...]

76 206-4147 DVD Codes Brand Code(s) APEX DIGIT AL 022 ONKYO 008, 017 P ANASONIC 003, 009 PHILIPS 013 PIONEER 004, 026 PROCEED 021 PROSCAN 005, 006 RCA 005, 006 SAMSUNG 01 1, 015 SONY 007 THOMPSON 005, 006 TOSHIBA 008, 019 Y AMAHA 009, 018 ZENITH 010, 016, 025 Reference: Remote Control Codes (Cont.)[...]

77 206-4147 Reference: IR Codes Con fi guration of Frame 1st frame Repeat frame Lead Code Repeat Code Bit Description Frame Interval: Tf The waveform is transmitted as long as a key is depressed. Bit “0” Bit “1” Remote Control Connection Connect your wired remote control to the REMOTE CONTROL OUT port on the STB1000 jack panel. Remote Cont[...]

78 206-4147 Code (Hexa) Function Note 08 POWER Remote Control Button (Power On/Of f) 0F TV Remote Control Button 0B INPUT Remote Control Button 0A SAP Remote Control Button AB RA TIO Remote Control Button AA GUIDE Remote Control Button 4C P ORT AL Remote Control Button AA INFO Remote Control Button 10-19 Number Key 0–9 Remote Control Button 4C - [...]

79 206-4147 T roubleshooting General T roubleshooting Some Quick and Easy T ips for Resolving Problems Software Problems Cannot direct enter channel number or “No Signal” appears. Channel not included in channel lineup in internal STB controller (PTC). After 2-5-5 + MENU, only channels included in STB PTC will appear . If channel is available, [...]

80 206-4147 Controller Quick Check Bad STB Ye s No No Ye s Press POWER on Installer Remote. STB responded? No Ye s End Bad STB Display panel ON? Ye s No Press VOLUME UP/ DOWN or MUTE key on LG Installer Remote. STB conected to AC Power? Plug into AC Power outlet. 1. 2. 3. No Ye s Make sure the display panel is plugged in to the STB. Check the RS-23[...]

81 206-4147 T roubleshooting (Cont.) Commercial Mode Check / FTG Operation T roubleshooting Press POWER on Installer Remote. STB responded? Bad STB Ye s No STB stopped responding or continued to respond? STB is in Commercial Mode. Stopped responding STB is not in Commercial Mode. Call T echnical Support for assistance. Continued to respond Leave th[...]

82 206-4147 T roubleshooting (Cont.) Clone Programmer T roubleshooting W arning: Do not connect a clone programmer to the STB1000 MPI/GAME CONTROL port while the STB is in LodgeNet PPV Mode, as this will damage the clone programmer . Reset Clone Programmer After Static Shock After replacing exhausted batteries (L T2002 only), or if the clone progra[...]

83 206-4147 Specifications Dimensions Height: 1.77 inches (45 mm) Width: 13.875 inches (352.42 mm) Depth: 9.72 inches (247 mm) Weight: 6.4 pounds (2.90 kgrms) Environmental Storage Conditions T emperature: -20 to 50 degrees Celsius -4 to 122 degrees Fahrenheit Humidity: 10% to 90% Environmental Operating Conditions T emperature: 0 to 40 degrees Cel[...]

84 206-4147 75 OHM RF CABLE The wire that comes from an off-air antenna or cable service provider . The end looks like a hex-shaped nut with a wire through the middle. It screws onto the Antenna/Cable threaded jack on the back of the TV . 300 TO 75 OHM ADAPTER A small device that connects a 2-wire 300 ohm antenna to a 75 ohm RF jack. It is usually [...]

85 206-4147 Document Revision History / Notes Notes Document Revision History Date Description February 201 1 Revision A: New document Product documentation is available online at: www .LGsolutions.com/products . From the Products page, select TVs, Systems & Solutions , then Interface / Control Boxes & Cards , then STB1000 . Click the Liter[...]

© Copyright 201 1, LG Electronics U.S.A., Inc. 206-4147 Revision A Broadcast Products Welcome to the LG family! We believe that you will be pleased with your new STB1000 HD Commercial Interface STB. Please read this warranty carefully , it is a “LIMITED WARRANTY” as defined under Federal Law . This warranty gives you specific legal rights, and[...]