Lincoln Electric LN-10 manual
- Consulta online o descarga el manual de instrucciones
- 48 páginas
- 0.76 mb
Ir a la página of
manuales de instrucciones parecidos
-
Welder
Lincoln Electric LN-8
4 páginas 0.19 mb -
Welder
Lincoln Electric IM904
38 páginas 0.8 mb -
Welder
Lincoln Electric DC-400
42 páginas 9.55 mb -
Welder
Lincoln Electric IM555
22 páginas 0.3 mb -
Welder
Lincoln Electric IM281-B
23 páginas 0.38 mb -
Welder
Lincoln Electric IM274-A
140 páginas 4.05 mb -
Welder
Lincoln Electric Power Mig 215 XT
8 páginas 1.09 mb -
Welder
Lincoln Electric POWER WAVE SVM156-A
150 páginas 5.83 mb
Buen manual de instrucciones
Las leyes obligan al vendedor a entregarle al comprador, junto con el producto, el manual de instrucciones Lincoln Electric LN-10. La falta del manual o facilitar información incorrecta al consumidor constituyen una base de reclamación por no estar de acuerdo el producto con el contrato. Según la ley, está permitido adjuntar un manual de otra forma que no sea en papel, lo cual últimamente es bastante común y los fabricantes nos facilitan un manual gráfico, su versión electrónica Lincoln Electric LN-10 o vídeos de instrucciones para usuarios. La condición es que tenga una forma legible y entendible.
¿Qué es un manual de instrucciones?
El nombre proviene de la palabra latina “instructio”, es decir, ordenar. Por lo tanto, en un manual Lincoln Electric LN-10 se puede encontrar la descripción de las etapas de actuación. El propósito de un manual es enseñar, facilitar el encendido o el uso de un dispositivo o la realización de acciones concretas. Un manual de instrucciones también es una fuente de información acerca de un objeto o un servicio, es una pista.
Desafortunadamente pocos usuarios destinan su tiempo a leer manuales Lincoln Electric LN-10, sin embargo, un buen manual nos permite, no solo conocer una cantidad de funcionalidades adicionales del dispositivo comprado, sino también evitar la mayoría de fallos.
Entonces, ¿qué debe contener el manual de instrucciones perfecto?
Sobre todo, un manual de instrucciones Lincoln Electric LN-10 debe contener:
- información acerca de las especificaciones técnicas del dispositivo Lincoln Electric LN-10
- nombre de fabricante y año de fabricación del dispositivo Lincoln Electric LN-10
- condiciones de uso, configuración y mantenimiento del dispositivo Lincoln Electric LN-10
- marcas de seguridad y certificados que confirmen su concordancia con determinadas normativas
¿Por qué no leemos los manuales de instrucciones?
Normalmente es por la falta de tiempo y seguridad acerca de las funcionalidades determinadas de los dispositivos comprados. Desafortunadamente la conexión y el encendido de Lincoln Electric LN-10 no es suficiente. El manual de instrucciones siempre contiene una serie de indicaciones acerca de determinadas funcionalidades, normas de seguridad, consejos de mantenimiento (incluso qué productos usar), fallos eventuales de Lincoln Electric LN-10 y maneras de solucionar los problemas que puedan ocurrir durante su uso. Al final, en un manual se pueden encontrar los detalles de servicio técnico Lincoln Electric en caso de que las soluciones propuestas no hayan funcionado. Actualmente gozan de éxito manuales de instrucciones en forma de animaciones interesantes o vídeo manuales que llegan al usuario mucho mejor que en forma de un folleto. Este tipo de manual ayuda a que el usuario vea el vídeo entero sin saltarse las especificaciones y las descripciones técnicas complicadas de Lincoln Electric LN-10, como se suele hacer teniendo una versión en papel.
¿Por qué vale la pena leer los manuales de instrucciones?
Sobre todo es en ellos donde encontraremos las respuestas acerca de la construcción, las posibilidades del dispositivo Lincoln Electric LN-10, el uso de determinados accesorios y una serie de informaciones que permiten aprovechar completamente sus funciones y comodidades.
Tras una compra exitosa de un equipo o un dispositivo, vale la pena dedicar un momento para familiarizarse con cada parte del manual Lincoln Electric LN-10. Actualmente se preparan y traducen con dedicación, para que no solo sean comprensibles para los usuarios, sino que también cumplan su función básica de información y ayuda.
Índice de manuales de instrucciones
-
Página 1
LN- 10 Heads & Controls Bench Model OPERA TOR’S MANUAL IM906 August, 2007 Safety Depends on You Lincoln arc welding and cutting equipment is designed and built with safety in mind. However, your overall safety can be increased by proper installation ... and thought- ful operation on your part. DO NOT INSTALL, OPERATE OR REPAIR THIS EQUIPMENT [...]
-
Página 2
FOR ENGINE powered equipment. 1.a. Turn the engine off before troubleshooting and maintenance work unless the maintenance work requires it to be running. ____________________________________________________ 1.b. Operate engines in open, well-ventilated areas or vent the engine exhaust fumes outdoors. ________________________________________________[...]
-
Página 3
ELECTRIC SHOCK can kill. 3.a. The electrode and work (or ground) circuits are electrically “hot” when the welder is on. Do not touch these “hot” parts with your bare skin or wet clothing. Wear dry, hole-free gloves to insulate hands. 3.b. Insulate yourself from work and ground using dry insulation. Make certain the insulation is large enoug[...]
-
Página 4
iii SAFETY iii FOR ELECTRICALL Y powered equipment. 8.a. Turn off input power using the disconnect switch at the fuse box before working on the equipment. 8 . b. Install equipment in accordance with the U.S. National Electrical Code, all local codes and the manufacturerʼs recommendations. 8.c. Ground the equipment in accordance with the U.S. Natio[...]
-
Página 5
iv SAFETY iv Mar. ʻ93 PRÉCAUTIONS DE SÛRETÉ Pour votre propre protection lire et observer toutes les instructions et les précautions de sûreté specifiques qui parraissent dans ce manuel aussi bien que les précautions de sûreté générales suiv- antes: Sûreté Pour Soudage A LʼArc 1. Protegez-vous contre la secousse électrique: a. Les c[...]
-
Página 6
v v Thank You for selecting a QUALITY product by Lincoln Electric. We want you to take pride in operating this Lincoln Electric Company product ••• as much pride as we have in bringing this product to you! Read this Operators Manual completely before attempting to use this equipment. Save this manual and keep it handy for quick reference. Pay[...]
-
Página 7
vi vi T ABLE OF CONTENTS Page Installation .......................................................................................................Section A Technical Specifications ....................................................................................................... A-1 General Description .........................................[...]
-
Página 8
WIRE DRIVE OR WIRE DRIVE SECTION OF FEEDER SPEC.# TYPE LOW SPEED RATIO HIGH SPEED RATIO Speed Wire Size Speed Wire Size Solid Cored Solid Cored K1559-5 LN-10 35-500 IPM .025 - 3/32 in. .035 - .120 in. 50 - 750 IPM .025 - 1/16 in. .035 - 5/64 in. Std Drive Bench Model (0.89-12.7 M/M) (0.6 - 2.4 mm) (0.9 - 3.0 mm) (1.25 - 19.0 M/M) (0.6 - 1.6 mm) (0.[...]
-
Página 9
Electrode Routing The electrode supply may be either from reels, Readi- Reels, spools, or bulk packaged drums or reels. Observe the following precautions: a) The electrode must be routed to the wire drive unit so that the bends in the wire are at a mini- mum, and also that the force required to pull the wire from the reel into the wire drive unit i[...]
-
Página 10
6) Install each drive roll by pushing over shaft until it butts up against locating shoulder on the drive roll shaft. (Do Not exceed maximum wire size rating of the wire drive). 7) Install Outer Wire Guide by sliding over locating pins and tightening in place. 8) Engage upper drive rolls if they are in the “open” position and close Pressure Doo[...]
-
Página 11
Gun Cable Connection with Fast-Mate Connection 1. Check that the drive rolls, feeder guide tubes and gun connector guide tube are appropriate for the electrode size being used. If necessary, change them per “Wire Drive Roll Kits” in this section. 2. Connect gun to gun connector making sure all pins and gas tube line up with appropriate holes in[...]
-
Página 12
ELECTRICAL INST ALLA TION --------------------------------------------------- Input Cable: LN-10 Control to Power Source K1501-10 (Control Cable only) Consists of a 9-conductor control cable with 14-pin control cable plug, without electrode cable, and is available in a length of 10 ft. (3 m). With input power disconnected from the power source, ins[...]
-
Página 13
A-6 INST ALLA TION LN-10 A-6 OPTIONAL FEA TURES INST ALLA TION Dual Procedure Switch Options K683-1 Dual Procedure Switch (One per gun) - Requires K686-2 Adapter for LN-10. Kit includes gun switch, and mountings for Lincoln Innershield and Magnum guns, with 15 ft. (4.5 m) control cable and 3- pin plug. K686-2 Adapter permits 3-pin plug and 5-pin gu[...]
-
Página 14
B-1 OPERA TION B-1 LN-10 SAFETY PRECAUTIONS DUTY CYCLE The LN-10 models are rated at 60% duty cycle * for a maximum current of 600 amps. * Based on a 10 minute time period (6 minutes on, and 4 minutes off). LN-10 CONTROL DIP SWITCH SETUP Initial set up of the LN-10 control for the system com- ponents being used and for general operator prefer- ence[...]
-
Página 15
B-2 OPERA TION B-2 Setting the DIP Switches The DIP switches are each labeled with an “ON” arrow showing the on direction for each of the 8 indi- vidual switches in each DIP switch (S1 and S2). The functions of these switches are also labeled and set as described below: Wire Drive Head Selection The LN-10 control is set up for proper presettabl[...]
-
Página 16
Metric/English Wire Feed Speed Display Selection The LN-10 Control is set up for Wire Feed Speed dis- play in Metric units (m/min.) or English units (IPM) by setting S2 DIP Switch 1 (Labeled “M”): S2 switch 1 OFF = IPM (as shipped) S2 switch 1 ON = m/min 4-Step T rigger Mode Operation Selection The LN-10 Control is set up for 4-Step Trigger mod[...]
-
Página 17
Minimum Limits Setting Mode Selection The LN-10 control is set up for allowing a minimum weld WFS and arc voltage setting for each procedure by set- ting S2 DIP Switch 6 (Labeled “-”). S2 switch 6 ON - Minimum Limits Setting mode ON When Minimum Limits Setting mode is selected, all keys except the procedure key are disabled. Welding is not allo[...]
-
Página 18
B-5 OPERA TION B-5 Keypad and Display Description Keypad - Seven key, membrane type with "snap" tac- tile feel and embossed domes. Long life design. Spatter resistant surface. Displays - Two digital LED displays with .56" (14.2 mm) character height. Top (3-1/2 digit) displays Preset and Actual (while welding) arc voltage in volts wit[...]
-
Página 19
B-6 OPERA TION B-6 T rigger Mode Selection Trigger Mode Select key - enables operator to choose mode of operation shown by the indicator lights. Pressing key caus- es mode lights to sequence (top to bottom) starting from the current indicated selection. Top Light - Indicates gun trigger has been selected to perform the Cold Feed Forward function in[...]
-
Página 20
B-7 OPERA TION B-7 Control Select key - enables operator to choose Run-In procedure as indicated by the light turning on. When light is on, the settings of Run-In Wire Feed Speed and Voltage are dis- played. After Weld procedure is set, Run-in pro- cedure should be set to optimize arc starting. Speed encoder knob can adjust run-in speed between min[...]
-
Página 21
B-8 OPERA TION B-8 Maximum and Minimum Limits Setting Modes Limits setting modes are available for limiting the range for setting wire feed speed and voltage. The limits can be set independently for each procedure. The following steps should be followed for setting the maximum and minimum limits: 1. Turn off the power at the power source. 2. Remove[...]
-
Página 22
B-9 OPERA TION B-9 DUAL PROCEDURE REMOTE CONTROL (K1449-1) When this option is connected to the LN-10 Control Box receptacle, and the Procedure Key selects “REMOTE” the front panel knob controls and proce- dure selection is transferred to the knob encoder con- trols and Procedure Selector Switch of the remote, which function in the exact same m[...]
-
Página 23
B-10 OPERA TION B-10 T o Mount a 50-60 Lb. (22.7-27.2 kg) Coil: (Using K1504-1 Coil Reel) (For 50-60 lb Readi- Reels a K438 Readi-Reel Adapter must be used). The Spindle must be located in the UPPER mounting hole. 1) With the K1504-1 Coil Reel mounted on to the 2" (51 mm) spindle (or with reel laying flat on the floor) loosen the spinner nut a[...]
-
Página 24
B-1 1 OPERA TION B-1 1 1 ) Press end of gun against a solid object that is electrically isolated from the welder output and press the gun trigger for several seconds. 2) If the wire "birdnests", jams, or breaks at the drive roll, the drive roll pressure is too great. Back the pressure setting out 1/2 turn, run new wire through gun, and re[...]
-
Página 25
B-12 OPERA TION B-12 WIRE REEL CHANGING At the end of a coil, remove the last of the old elec- trode coil from the conductor cable by either pulling it out at the nozzle end of the gun or by using the follow- ing procedure: 1) Cut the end of the electrode off at the gun end. Do not break it off by hand because this puts a slight bend in the wire ma[...]
-
Página 26
B-13 OPERA TION B-13 EXPLANA TION OF PROMPTING AND ERROR MESSAGES Display Prompt or Error Acc Displayed on Voltage display, indicates WFS display is showing acceleration setting, “1" to “5" (See “Acceleration Selection” in this sec- tion). OFF Displayed on WFS and voltage displays; indi- cates limits for WFS or voltage are off for[...]
-
Página 27
TABLE C.1 – DRIVE ROLL AND GUIDE TUBE KITS Wire Size 4-Rolll DH Drive (4-Driven) Solid Steel Electrode 0.025” (0.6 mm) KP1505 - 030S 0.030” (0.8 mm) KP1505 - 030S 0.035” (0.9 mm) KP1505 - 035S 0.040” (1.0 mm) KP1505 - 040S 0.040” (1.0 mm) KP1505 - 045S 0.045” (1.2 mm) KP1505 - 045S 0.052” (1.4 mm) KP1505 - 052S 1/16” (1.6 mm) KP15[...]
-
Página 28
C-2 ACCESSORIES C-2 K683-3 DUAL PROCEDURE SWITCH Kit includes gun switch, and mountings for Lincoln Innershield and Magnum guns, with 15 ft. (4.5m) con- trol cable and 5-pin plug with two leads to connect to gun trigger. SPINDLE ADAPTERS: Coil Adapter: K1504-1 Permits 50 lb to 60 lb (22.7-27.2 Kg.) Coils to be mounted on 2” (51 mm) O.D. spindles.[...]
-
Página 29
C-3 ACCESSORIES C-3 Magnum 550 Guns The easiest and least expensive way to use the Magnum 550 guns with LN-10 wire feeders is to order the gun with the K613-2 connector kit, and install a K1500-3 gun connection kit to the wire feeder. Lincoln Innershield and Sub Arc Guns All of these guns can be connected to the LN-10 by using the K1500-1 Adapter K[...]
-
Página 30
C-4 ACCESSORIES C-4 K1557-1 SWIVEL MOUNT The K1557-1 Swivel mount attaches to the power source. This kit includes a feeder adapter plate that allows the feeder to rotate on top of the power source. The feeder can be easily separated from the swivel mount at any time. This option is compatible with the K1556-1 Light Duty Caster Kit. K1556-1 LIGHT DU[...]
-
Página 31
D-1 MAINTENANCE D-1 LN-10 A VOIDING WIRE FEEDING PROBLEMS Wire feeding problems can be avoided by observing the following gun handling and feeder set up proce- dures: • Do not kink or pull cable around sharp corners. • Keep the electrode cable as straight as possible when welding or loading electrode through cable. • Do not allow dolly wheels[...]
-
Página 32
E-1 TROUBLESHOOTING E-1 LN-10 If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely, contact your Local Lincoln Authorized Field Service Facility for technical troubleshooting assistance before you proceed. CAUTION This Troubleshooting Guide is provided to help you locate and repair possible m[...]
-
Página 33
Rough wire feeding or wire not feed- ing, but drive rolls are turning. Variable or “hunting” arc. 1. Gun cable kinked and/or twisted. 2. Wire jammed in gun and cable. 3. Check for current position of drive rolls relative to split wire guide groove. 4. Drive rolls may not be seated properly. 5. Gun cable dirty. 6. Worn drive roll. 7. Worn nozzle[...]
-
Página 34
1. Improper procedures or techniques. 2. Improper gas shielding. 1. Tip overheating because of prolonged or excessive high current and/or duty cycle welding. 1 . The wire drive motor may be over- loaded. “Hxx” will be displayed on the WFS display, where “xx” is the num- ber of seconds until the wire drive attempts to run again. 2 . A jumper[...]
-
Página 35
TROUBLESHOOTING LN-10 Observe all Safety Guidelines detailed throughout this manual If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely, contact your Local Lincoln Authorized Field Service Facility for technical troubleshooting assistance before you proceed. CAUTION PROBLEMS (SYMPTOMS) POSSI[...]
-
Página 36
TROUBLESHOOTING LN-10 Observe all Safety Guidelines detailed throughout this manual If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely, contact your Local Lincoln Authorized Field Service Facility for technical troubleshooting assistance before you proceed. CAUTION PROBLEMS (SYMPTOMS) POSSI[...]
-
Página 37
TROUBLESHOOTING LN-10 Observe all Safety Guidelines detailed throughout this manual If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely, contact your Local Lincoln Authorized Field Service Facility for technical troubleshooting assistance before you proceed. CAUTION PROBLEMS (SYMPTOMS) POSSI[...]
-
Página 38
TROUBLESHOOTING LN-10 Observe all Safety Guidelines detailed throughout this manual If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely, contact your Local Lincoln Authorized Field Service Facility for technical troubleshooting assistance before you proceed. CAUTION PROBLEMS (SYMPTOMS) POSSI[...]
-
Página 39
TROUBLESHOOTING LN-10 Observe all Safety Guidelines detailed throughout this manual If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely, contact your Local Lincoln Authorized Field Service Facility for technical troubleshooting assistance before you proceed. CAUTION PROBLEMS (SYMPTOMS) POSSI[...]
-
Página 40
TROUBLESHOOTING E-9 Observe all Safety Guidelines detailed throughout this manual If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely, contact your Local Lincoln Authorized Field Service Facility for technical troubleshooting assistance before you proceed. CAUTION PC BOARD TROUBLESHOOTING GU[...]
-
Página 41
F-1 DIAGRAMS F-1 LN-10 NOTE: This diagram is for reference only. It may not be accurate for all machines covered by this manual. The specific diagram for a particular code is pasted inside the machine on one of the enclosure panels. If the diagram is illegible, write to the Service Department for a replacement. Give the equipment code number.[...]
-
Página 42
F-2 DIAGRAMS F-2 LN-10 NOTE: This diagram is for reference only. It may not be accurate for all machines covered by this manual. The specific diagram for a particular code is pasted inside the machine on one of the enclosure panels. If the diagram is illegible, write to the Service Department for a replacement. Give the equipment code number. 5 1 2[...]
-
Página 43
F-3 DIAGRAMS F-3 LN-10 M 18903 7-2000 (1 5.3 0) (3 0.3 5) (2 0.4 6) (1 4.4 3) (5. 25 ) (1 0.6 6) BENCH MODEL DIMENSION PRINT DIMENSION PRINT[...]
-
Página 44
NOTES LN-10[...]
-
Página 45
NOTES LN-10[...]
-
Página 46
W ARNING AV I S O D E PRECAUCION A TTENTION W ARNUNG A TENÇÃO Spanish French German Portuguese Japanese Chinese Korean Arabic READ AND UNDERST AND THE MANUF ACTURER’S INSTRUCTION FOR THIS EQUIPMENT AND THE CONSUMABLES TO BE USED AND FOLLOW YOUR EMPLOYER’S SAFETY PRACTICES. SE RECOMIENDA LEER Y ENTENDER LAS INSTRUCCIONES DEL F ABRICANTE P ARA [...]
-
Página 47
W ARNING AV I S O D E PRECAUCION A TTENTION W ARNUNG A TENÇÃO Spanish French German Portuguese Japanese Chinese Korean Arabic LEIA E COMPREENDA AS INSTRUÇÕES DO F ABRICANTE P ARA ESTE EQUIP AMENTO E AS P ARTES DE USO, E SIGA AS PRÁTICAS DE SEGURANÇA DO EMPREGADOR. ● Keep your head out of fumes. ● Use ventilation or exhaust to remove fumes[...]
-
Página 48
• Sales and Service through Subsidiaries and Distributors Worldwide • Cleveland, Ohio 44117-1199 U.S.A. TEL: 216.481.8100 FAX: 216.486.1751 WEB SITE: www.lincolnelectric.com • World's Leader in Welding and Cutting Products •[...]