Ir a la página of
manuales de instrucciones parecidos
-
Receiver
Marantz Melody Media MCR603
48 páginas -
Receiver
Marantz Model 2238-B
21 páginas 11.61 mb -
Receiver
Marantz SR7005SG
124 páginas -
Receiver
Marantz SR6006
130 páginas -
Receiver
Marantz Model 18
34 páginas 6.75 mb -
Receiver
Marantz SR5010
293 páginas -
Receiver
Marantz M-CR510 Melody Stream
109 páginas 3.75 mb -
Receiver
Marantz Model 2240
19 páginas 1.3 mb
Buen manual de instrucciones
Las leyes obligan al vendedor a entregarle al comprador, junto con el producto, el manual de instrucciones Marantz SR6006SG. La falta del manual o facilitar información incorrecta al consumidor constituyen una base de reclamación por no estar de acuerdo el producto con el contrato. Según la ley, está permitido adjuntar un manual de otra forma que no sea en papel, lo cual últimamente es bastante común y los fabricantes nos facilitan un manual gráfico, su versión electrónica Marantz SR6006SG o vídeos de instrucciones para usuarios. La condición es que tenga una forma legible y entendible.
¿Qué es un manual de instrucciones?
El nombre proviene de la palabra latina “instructio”, es decir, ordenar. Por lo tanto, en un manual Marantz SR6006SG se puede encontrar la descripción de las etapas de actuación. El propósito de un manual es enseñar, facilitar el encendido o el uso de un dispositivo o la realización de acciones concretas. Un manual de instrucciones también es una fuente de información acerca de un objeto o un servicio, es una pista.
Desafortunadamente pocos usuarios destinan su tiempo a leer manuales Marantz SR6006SG, sin embargo, un buen manual nos permite, no solo conocer una cantidad de funcionalidades adicionales del dispositivo comprado, sino también evitar la mayoría de fallos.
Entonces, ¿qué debe contener el manual de instrucciones perfecto?
Sobre todo, un manual de instrucciones Marantz SR6006SG debe contener:
- información acerca de las especificaciones técnicas del dispositivo Marantz SR6006SG
- nombre de fabricante y año de fabricación del dispositivo Marantz SR6006SG
- condiciones de uso, configuración y mantenimiento del dispositivo Marantz SR6006SG
- marcas de seguridad y certificados que confirmen su concordancia con determinadas normativas
¿Por qué no leemos los manuales de instrucciones?
Normalmente es por la falta de tiempo y seguridad acerca de las funcionalidades determinadas de los dispositivos comprados. Desafortunadamente la conexión y el encendido de Marantz SR6006SG no es suficiente. El manual de instrucciones siempre contiene una serie de indicaciones acerca de determinadas funcionalidades, normas de seguridad, consejos de mantenimiento (incluso qué productos usar), fallos eventuales de Marantz SR6006SG y maneras de solucionar los problemas que puedan ocurrir durante su uso. Al final, en un manual se pueden encontrar los detalles de servicio técnico Marantz en caso de que las soluciones propuestas no hayan funcionado. Actualmente gozan de éxito manuales de instrucciones en forma de animaciones interesantes o vídeo manuales que llegan al usuario mucho mejor que en forma de un folleto. Este tipo de manual ayuda a que el usuario vea el vídeo entero sin saltarse las especificaciones y las descripciones técnicas complicadas de Marantz SR6006SG, como se suele hacer teniendo una versión en papel.
¿Por qué vale la pena leer los manuales de instrucciones?
Sobre todo es en ellos donde encontraremos las respuestas acerca de la construcción, las posibilidades del dispositivo Marantz SR6006SG, el uso de determinados accesorios y una serie de informaciones que permiten aprovechar completamente sus funciones y comodidades.
Tras una compra exitosa de un equipo o un dispositivo, vale la pena dedicar un momento para familiarizarse con cada parte del manual Marantz SR6006SG. Actualmente se preparan y traducen con dedicación, para que no solo sean comprensibles para los usuarios, sino que también cumplan su función básica de información y ayuda.
Índice de manuales de instrucciones
-
Página 1
Owner’ s Man ual A V Sur r ound Receiv er SR60 06 Basic version Adv anced v ersion Infor mation[...]
-
Página 2
I n SAFETY PRECAUTIONS CA UTION RISK OF ELECTRIC SHOCK DO NO T OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence [...]
-
Página 3
II n NO TES ON USE WARNINGS • Avoid high temperatures. Allow for sufficient heat dispersion when installed in a rack. • Handle the power cord carefully. Hold the plug when unplugging the cord. • Keep the unit free from moisture, water, and dust. • Unplug the power cord when not using the unit for long periods of time. • Do[...]
-
Página 4
1 Thank you for purchasing this marantz product. To ensure proper operation, please read this owner’s manual carefully before using the product. After reading them, be sure to keep them for future reference. Getting started Basic version ·······················································[...]
-
Página 5
2 Features Fully discrete, identical quality and power for all 7 channels (110 W x 7ch, 8 Ω) The unit is equipped with a power amplifier that reproduces highfidelity sound in surround mode with equal quality and power for all channels, true to the original sound. The power amplifier circuit adopts a discrete-circuit configuration that achieves[...]
-
Página 6
3 Cautions on handling • Before turning the power on Check once again that all connections are correct and that there are no problems with the connection cables. • Power is supplied to some of the circuitry even when the unit is set to the standby mode. When going on vacation or leaving home for long periods of time, be sure to unplug the[...]
-
Página 7
Basic version 4 F Connections v page5 F Settings v page20 F Playback (Basic operation) v page27 F Selecting a listening mode (SURROUND MODE) v page50 Connection v page8 , 10 Connection v page8 , 11 Playback – Playback v page29 Connection v page8 , 11 Connection v page16 Playback v page29 Playback v page29 Connecti[...]
-
Página 8
5 Important information • Make connections as follows before using this unit. Select an appropriate connection type according to the devices to be connected. • You may need to make some settings on this unit depending on the connection method. Refer to each description for more information. • Select the cables (sold separately) accor[...]
-
Página 9
6 Important information G Flow of video signals for ZONE2 H Video connector Monitor (TV) Video connector Video connector Video connector Video device This unit Output Input (IN) Output (MONITOR OUT) Input • Set when not using the video conversion function. “Video Convert” ( v page90 ) • Set when changing the resolution of the video[...]
-
Página 10
7 Connecting an HDMI-compatible device You can connect up to nine HDMI-compatible devices (7-inputs/2-outputs) to the unit. HDMI function This unit supports the following HDMI functions: • 3D • Deep Color ( v page138 ) • Auto Lip Sync ( v page104 , 138 ) • “x.v.Color”, sYCC601 color, Adobe RGB color, Adobe YCC601 color[...]
-
Página 11
8 Connecting an HDMI-compatible device OUT HDMI G Front panel H Digital camcorder 1 • When this unit is connected to other devices with HDMI cables, connect this unit and TV also with an HDMI cable. • When connecting a device that supports Deep Color, please use a “High Speed HDMI cable” or “High Speed HDMI cable with Ethernet”. ?[...]
-
Página 12
9 Connecting an HDMI-compatible device Connecting to a device equipped with a DVI-D connector When an HDMI/DVI conversion cable (sold separately) is used, the HDMI video signals are converted to DVI signals, allowing connection to a device equipped with a DVI-D connector. NOTE • No sound is output when connected to a device equipped with a DVI[...]
-
Página 13
10 Cables used for connections Video cable (sold separately) Video cable Component video cable Y P B P R Y P B P R Audio cable (sold separately) Optical cable IN VIDEO AUDIO OPTICAL OUT VIDEO COMPONENT VIDEO Y P B P R IN TV Set this to change the digital input connector or component video input connector to which the input source is assigned. “In[...]
-
Página 14
11 Connecting a Blu-ray Disc player • You can enjoy video and audio from a Blu-ray Disc. • Select the connector to use and connect the device. • For instructions on HDMI connections, see “Connecting an HDMI-compatible device” ( v page7 ). Cables used for connections Video cable (sold separately) Video cable Component video cab[...]
-
Página 15
12 Connecting a set-top box (Satellite tuner/cable TV) • You can watch satellite or cable TV. • Select the connector to use and connect the device. • For instructions on HDMI connections, see “Connecting an HDMI-compatible device” ( v page7 ). Cables used for connections Video cable (sold separately) Video cable Audio cable (s[...]
-
Página 16
13 Connecting a video cassette recorder • You can record video onto a video cassette tape. • Select the connector to use and connect the device. • When recording analog audio, use the analog connection. • For instructions on HDMI connections, see “Connecting an HDMI-compatible device” ( v page7 ). Cables used for connecti[...]
-
Página 17
14 Supported iPod models • iPod / iPod classic • iPod nano • iPod touch • iPhone Connecting an iPod or USB memory device to the USB port You can enjoy music stored on an iPod or USB memory device. Cables used for connections To connect an iPod to this unit, use the USB cable supplied with the iPod. USB memory device iPod or mara[...]
-
Página 18
15 Connecting an antenna • Connect the FM antenna or AM loop antenna supplied with the unit to enjoy listening to radio broadcasts. • After connecting the antenna and receiving a broadcast signal ( v page 34 “Listening to FM/AM broadcasts”), fix the antenna with tape in a position where the noise level becomes minimal. w e q FM ou[...]
-
Página 19
16 Connecting a CD player • You can enjoy CD sound. • Select the connector to use and connect the device. Cables used for connections Audio cable (sold separately) Audio cable R L R L Optical cable L L R R AUDIO AUDIO R L OUT AUDIO OPTICAL OUT CD player Set this to change the digital input connector to which the input source is assigned. [...]
-
Página 20
17 Connecting a wireless receiver (RX101) By connecting a wireless receiver RX101 (sold separately) to this unit, you can receive and playback audio signals from other devices using the Bluetooth Communication Function. • Use a Bluetooth device that is A2DP compatible ( v page138 “A2DP”). • You can also use wireless receiver RX101 [...]
-
Página 21
18 Connecting a external power amplifier • You can use this unit as a pre-amp by connecting a commercially available power amp to the PRE OUT connector. Adding a power amp to each of the channels provides an even greater sound presence. • Select the terminal to use and connect the device. Cables used for connections Audio cable (sold sep[...]
-
Página 22
19 Connecting to a home network (LAN) • This unit lets you play via your home network (LAN) music files stored on a computer and music content such as that from Internet radio. You can also operate this unit from a computer using the Web control function. • You can update by downloading the latest firmware from the marantz website. For [...]
-
Página 23
20 The acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made automatically. This is called “Audyssey ® Auto Setup”. To perform measurement, place the setup microphone in multiple locations all around the listening area. For best results, we recommend you measure in six or more posi[...]
-
Página 24
21 2 Set up the subwoofer If using a subwoofer capable of the following adjustments, set up the subwoofer as shown below. n When using a subwoofer with a direct mode Set the direct mode to “On” and disable the volume adjustment and crossover frequency setting. n When using a subwoofer without a direct mode Make the following settings: • Vo[...]
-
Página 25
22 STEP 1 Preparation STEP 2 Detection & Measurement (Main) Set up speakers (Audyssey ® Auto Setup) 4 Connect the setup microphone to the SETUP MIC jack of this unit. AUDYSSEY AUTO SETUP 1 2 3 4 5 6 Amp Assign RETURN Auto Setup Start Channel Select STEP1 Preparation Connect the speakers and place them according to the recommendations in the ma[...]
-
Página 26
23 STEP 4 Calculation Set up speakers (Audyssey ® Auto Setup) 10 Repeat step 9, measuring positions 3 to 8. When measurement of position 8 is completed, a “Measurements finished.” message is displayed. AUDYSSEY AUTO SETUP 1 2 3 4 5 6 RETURN Next Calculation Retry STEP3 Measurement (Finish) Proceed to next (Calculation) Enter Cancel Measuremen[...]
-
Página 27
24 Set up speakers (Audyssey ® Auto Setup) 14 Select “Store” and then press ENTER . Save the measurement results. AUDYSSEY AUTO SETUP 1 2 3 4 5 6 STEP6 Store Now storing...Please wait. 20% AUDYSSEY AUTO SETUP 1 2 3 4 5 6 RETURN Store STEP6 Store Apply and store measurement result Enter Cancel Press “Store” to store calculation results. •[...]
-
Página 28
25 Error messages NOTE • An error message is displayed if Audyssey ® Auto Setup could not be completed due to speaker placement, the measurement environment, etc. If this happens, check the relevant items, be sure to take the necessary measures, then perform Audyssey ® Auto Setup over again. • If the result still differs from the actual[...]
-
Página 29
26 Parameter Check This function enables you to check the measurement results and equalizer characteristics after Audyssey ® Auto Setup. 1 Use ui to select “Parameter Check” and then press ENTER . SPEAKER SETUP Auto Setup Amp Assign Speaker Config. Bass Setting Distance Channel Level Audyssey Auto Setup Parameter Check Check auto setup measure[...]
-
Página 30
27 Playback (Basic operation) n Playing a Blu-ray Disc player/DVD player ( v page29 ) n Playing a CD player ( v page29 ) n Playing an iPod ( v page30 ) n Playing a USB memory device ( v page32 ) n Tuning in radio stations ( v page34 ) n Playing a network audio ( v page38 ) Selecting a listening mode (SURROUND MODE) ( v page50 )[...]
-
Página 31
28 n Using the “SOURCE SELECT” menu BD Recent Player Video Network Tuner SOURCE SELECT Source The currently selected input source is highlighted. q w e q Input Source The name of the highlighted input source is displayed. w Recently used sources The recently used input sources (up to five) are displayed. e Icons for the input sources in the di[...]
-
Página 32
29 Playing a Blu-ray Disc player/DVD player The following describes the procedure for playing Blu-ray Disc player/ DVD player. 1 Prepare for playback. q Turn on the power of the TV, subwoofer and player. w Change the TV input to the input of this unit. e Load the disc in the player. 2 Press ON to turn on power to the unit. 3 Press BD or DVD twice t[...]
-
Página 33
30 Playing an iPod You can play back both video, photo and audio. 1 Connect the iPod to the USB port ( v page 14 “Connecting an iPod or USB memory device to the USB port”). 2 Press ON to turn on power to the unit. 3 Press NET/USB twice to switch the input source to “NET/USB”. Favorites Internet Radio Flickr Last.fm Napster Media Server iPod[...]
-
Página 34
31 n iPod operation Operation buttons Function AMP MENU Amp menu SEARCH/INFO (Press and release) Page search z 1 / Character sort z 2 SEARCH/INFO (Press and hold) Remote / Direct mode switching uio p Cursor operation / Auto search (cue, ui ) / Manual search (Press and hold, ui ) ENTER (Press and release) Enter / Pause ENTER (Press and hold) Stop RE[...]
-
Página 35
32 Playing a USB memory device Playing back music or still picture (JPEG) files recorded on a USB memory device. Important information n USB memory devices A USB memory device can be connected to the USB port of this unit to play music and still picture (JPEG) files stored on the USB memory device. Also, files stored on an iPod can be played whe[...]
-
Página 36
33 Playing files stored on USB memory devices 1 Connect the USB memory device to the USB port ( v page 14 “Connecting an iPod or USB memory device to the USB port”). 2 Press NET/USB to switch the input source to “NET/USB”. Favorites Internet Radio Flickr Media Server USB [1/7] CH+ / - Preset Last.fm Napster 3 Use ui to select “USB”, th[...]
-
Página 37
34 Tuning in radio stations Listening to FM/AM broadcasts 1 Press TUNER to switch the input source to “TUNER”. 2 Press BAND to select “FM” or “AM”. FM When listening to an FM broadcast. AM When listening to an AM broadcast. CH A MEMORY Memory SEARCH Search Now Playing Band Tuning AUTO Mode Preset PRESET TUNING FM 87.50MHz BAND T.MODE TU[...]
-
Página 38
35 Tuning in radio stations n Listening to preset stations 1 Press SHIFT/TOP MENU to select the memory block (A to G). CH A FM 97.90MHz ST.Name HD1 Song Title Artist Name Program Type AUTO STEREO MEMORY Memory SEARCH Search Band Tuning Mode Preset PRESET TUNING BAND T.MODE TUNER A8 FM 90.10MHz A7 FM 90.10MHz A6 FM 90.10MHz A5 FM 90.10MHz A4 FM 108.[...]
-
Página 39
36 Tuning in radio stations PTY (Program Type) PTY identifies the type of RDS program. The program types and their displays are as follows: NEWS News WEATHER Weather AFFAIRS Current Affairs FINANCE Finance INFO Information CHILDREN Children’s program SPORT Sports EDUCATE Education SOCIAL Social Affairs DRAMA Drama RELIGION Religion CULTURE Cultu[...]
-
Página 40
37 RT (Radio Text) RT allows RDS stations to send text messages that appear on the display. “RT” appears on the display when radio text data is received. 1 Press TUNER twice to switch the input source to “TUNER”. 2 Press SEARCH/INFO to select “RT”. TUNER CH A MEMORY Memory SEARCH Search Now Playing Band Tuning Preset TUNING PRESET FM 97[...]
-
Página 41
38 Playing a network audio Follow this procedure to play Internet radio stations or music or still picture (JPEG) files stored on a computer . Important information n About the internet radio function • Internet radio refers to radio broadcasts distributed over the Internet. Internet radio stations from around the world can be received. •?[...]
-
Página 42
39 Playing a network audio G Compatible formats H Internet radio Media server z 1 WMA (Windows Media Audio) P P MP3 (MPEG-1 Audio Layer-3) P P WAV P MPEG-4 AAC P z 2 FLAC (Free Lossless Audio Codec) P JPEG P A server or server software compatible with distribution in the corresponding formats is required to play music files via a network. z 1 Medi[...]
-
Página 43
40 Playing a network audio Listening to internet radio 1 Prepare for playback. q Check the network environment, then turn on this unit’s power ( v page19 “Connecting to a home network (LAN)”). w If settings are required, make the “Network Connecting” ( v page107 ). 2 Press NET/USB twice to switch the input source to “NET/USB”. 3[...]
-
Página 44
41 Playing a network audio n Searching stations by keyword (Alphabetic strings) 1 Press ui to select “Search by Keyword”, then press ENTER or p . Station a n 0 _ b o 1 / c P 2 : d q 3 ˜ e r 4 ? f s 5 [ g t 6 h u 7 ] i v 8 ˆ j w 9 ` k x . { l y @ | m z - } Search by Keyword a/A SPACE INSERT DELETE OK RETURN Input Select Cancel SEARCH CursorM[...]
-
Página 45
42 Playing a network audio Listening to an Internet radio station registered to a preset channel button Press one of the registered P1 – P3 . n Registering internet radio stations as your favorites Favorites are listed at the top of the menu screen, so when a station is registered as a favorite it can be tuned in easily. 1 Press MEMORY while the [...]
-
Página 46
43 Playing a network audio n Clearing internet radio stations from your favorites 1 Press 3 to display the “SOURCE SELECT” menu, then select ( v page 28 ). 2 Press NET/USB to switch the remote control operating mode to “NET/USB”. 3 Press ui to select the Internet radio station you want to clear, then press MEMORY . 4 Press o to select “Re[...]
-
Página 47
44 Playing a network audio • Connections to the required system and specific settings must be made in order to play music files ( v page19 ). • Before starting, you must launch the computer’s server software and set the files as server contents. For details, see the operating instructions of your server software. • Depending [...]
-
Página 48
45 Playing a network audio Viewing photographs on the Flickr site You can view photographs shared by particular users, or all of the photographs shared on Flickr. n Viewing photographs shared by particular users 1 Prepare for playback. q Check the network environment, then turn on this unit’s power ( v page19 “Connecting to a home network (L[...]
-
Página 49
46 Playing a network audio n Flickr operation Operation buttons Function V Last played internet radio station P1 – P3 Preset channel (1 – 3) selection AMP MENU Amp menu SHIFT/TOP MENU Preset channel block selection SEARCH/INFO Page Search z uio p Cursor operation / Auto search (cue, ui ) ENTER (Press and release) Enter ENTER (Press and hold) St[...]
-
Página 50
47 Playing a network audio 9 Menu items on playback screen. Love this track Loving tracks improves your Last.fm recommendations, and you can optionally share them on popular social networks. Ban this track If you ban a track, we won’t play it again. You can undo this on the Last.fm website. Scrobbling Scrobbling sends the tracks you played to you[...]
-
Página 51
48 Playing a network audio Listening to Napster 1 Prepare for playback. q Check the network environment, then turn on this unit’s power ( v page19 “Connecting to a home network (LAN)”). w If settings are required, make the “Network Connecting” ( v page107 ). 2 Press 3 to display the “SOURCE SELECT” menu, then select ( v page 28 [...]
-
Página 52
49 Playing a network audio n Napster operation Operation buttons Function V Last played internet radio station P1 – P3 Preset channel (1 – 3) selection AMP MENU Amp menu SHIFT/TOP MENU Preset channel block selection SEARCH/INFO Search menu / Page search z uio p Cursor operation / Auto search (cue, ui ) ENTER (Press and release) Enter ENTER (Pre[...]
-
Página 53
50 Selecting a listening mode (SURROUND MODE) This unit can play input audio signals in multi-channel surround mode or in stereo mode. Select a listening mode suitable for the playback contents (movie, music, etc.) or according to your liking. Selecting a listening mode 1 Play the selected device ( v page 29 – 32 ). 2 Press AMP to set the remote [...]
-
Página 54
51 Selecting a listening mode Operation button Input signal Listening mode 2-channel z 1 AUTO z 2 STEREO DOLBY PL g x Movie z 3 DOLBY PL g Movie z 3 / DOLBY PL g Movie A-DSX DOLBY PL g x Music z 3 DOLBY PL g Music z 3 / DOLBY PL g Music A-DSX DOLBY PL g x Game z 3 DOLBY PL g Game z 3 DTS NEO:6 Cinema z 3 DTS NEO:6 Music z 3 DOLBY PL g z Height z 3 [...]
-
Página 55
52 Selecting a listening mode n Description of listening mode types Dolby listening mode Listening mode type Description DOLBY PL g x z 1 This mode can be selected when a Dolby Pro Logic g x decoder is used to play back 2-channel source in 6.1/7.1-channel surround sound including the surround back channel. By adding the surround back channel, a str[...]
-
Página 56
53 Selecting a listening mode marantz original listening mode Listening mode type Description MULTI CH STEREO This mode is for enjoying stereo sound from all speakers. The same sound as that from the front speakers (L/R) is played back at the same level from the surround speakers (L/R) and surround back speakers (L/R). VIRTUAL This mode is for enjo[...]
-
Página 57
Advanced version 54 F Speaker installation/connection (Advanced) v page55 F Connections (Advanced connection) v page66 F Playback (Advanced operation) v page68 F Playback in ZONE2/ZONE3 (Separate room) v page79 F How to make detailed settings v page82 F Other settings v page117 F Operating the connected devices by remote control u[...]
-
Página 58
55 This section provides the installation, connection, and setup methods of speaker systems other than the 7.1-channel system with surround back speakers. For the speaker installation, connection, and setup methods of the 7.1-channel system with surround back speakers, see C page 4 “SETUP WIZARD” . Use Audyssey ® Auto Setup function of this un[...]
-
Página 59
56 Install When 7.1ch (Front wide speaker) installed FL FR SL SR FWL FWR SW C z 1 z 2 z 3 Listening position z 1 22˚ – 30˚ z 2 55˚ – 60˚ z 3 90˚ – 110˚ G Speaker abbreviations H FL Front speaker (L) SL Surround speaker (L) FR Front speaker (R) SR Surround speaker (R) C Center speaker SB Surround back speaker SW Subwoofer FWL Front wide [...]
-
Página 60
57 Connect • For the method of connecting 7.1-channel system with surround back speakers, see C page 6 “Connecting the speakers” . • For the method of connecting the TV, see C page 3 “Connect this unit to the television using an HDMI cable (sold separately)” . 7.1-channel (Front height speaker) connection The illustration on the r[...]
-
Página 61
58 Connect 7.1-channel (Front wide speaker) connection The illustration on the right shows a connection example for performing 7.1-channel playback using the front wide speakers. To perform 7.1-channel playback using the front wide speakers, set “Amp Assign” to “F.Wide” in steps 3 and 4 for “Set up “Amp Assign”” ( v page64 ). NOT[...]
-
Página 62
59 Connect 6.1-channel (Surround back speaker) connection If using only one surround back speaker (with a 6.1-channel connection), connect to the “L” side of the SURR. BACK/AMP ASSIGN terminal. For speaker settings in this case, see “When 6.1ch (Surround back speaker) installed” ( v page56 ). To perform 6.1-channel playback using the sur[...]
-
Página 63
60 FL FR C SL SR SW 5.1-channel connection To perform 5.1-channel playback, set “Amp Assign” to “NORMAL” in steps 3 and 4 for “Set up “Amp Assign”” ( v page64 ). Also use the “Speaker Config.” setting ( v page101 ) to set “Surr.Back” to “None”. NOTE • For speaker cable connections, see C page 6 “Connecting [...]
-
Página 64
61 Connect Front A/B connection You can connect a second set of speakers to this unit and use them for playback. In this case, perform the settings using the SPEAKER A/B ( v page 28 “Set the front speakers to be used”). For surround playback of a multichannel source, if you connect the center speaker, surround speakers and subwoofers, 5.1-ch[...]
-
Página 65
62 Connect 2.1-channel connection FL FR SW NOTE • For speaker cable connections, see C page 6 “Connecting the speakers” . • For speaker impedance , see page57 . n For connecting two subwoofers Two subwoofers can be connected to this unit. The same signal is output from each subwoofer terminal. Basic version Adv anced v ersion Infor[...]
-
Página 66
63 Connect Bi-Amp connection You can use the front speakers via the bi-amp connection. A bi-amp connection is to connect separate amplifiers to the tweeter terminals and woofer terminals of speakers compatible with the bi-amp function. This prevents the back electromotive force (returned force without output) of the woofer sent to the tweeter, whi[...]
-
Página 67
64 1 Set up the remote control unit n Set up the operation mode Press AMP to set the remote control unit to AMP- operation mode. Press AMP 2 Connect the setup microphone. AUDYSSEY AUTO SETUP 1 2 3 4 5 6 Amp Assign RETURN Auto Setup Start Channel Select STEP1 Preparation Connect the speakers and place them according to the recommendations in the man[...]
-
Página 68
65 Set up speakers 6 Set up “Channel Select” Use ui to select “Channel Select”, and then press ENTER . AUDYSSEY AUTO SETUP 1 2 3 4 5 6 Amp Assign RETURN Auto Setup Start Channel Select STEP1 Preparation Connect the speakers and place them according to the recommendations in the manual, Set the following items If necessary. Enable skip of me[...]
-
Página 69
66 Connections (Advanced connection) Connecting the remote control connectors EXTERNAL INTERNAL EXTERNAL INTERNAL EXTERNAL INTERNAL REMOTE CONTROL OUT IN REMOTE CONTROL OUT IN REMOTE CONTROL OUT IN RC OUT w q IR receiver CD recorder DVD player CD player q You can control other marantz products through this unit with the remote control unit by conne[...]
-
Página 70
67 Connecting the RS-232C connector When you connect an external control device, you can control this unit with the external control device. External serial controller Perform the operation below beforehand. q Turn on the power of this unit. w Turn off the power of this unit from the external controller. e Check that the unit is in the standby mode[...]
-
Página 71
68 n HDMI control function ( v page68 ) n Sleep timer function ( v page69 ) n Adjusting the volume of the speakers ( v page70 ) n AirPlay ( v page71 ) n Party mode function ( v page72 ) n Zone Management function ( v page73 ) n Operating a media controller to play music and still pictures ( v page74 ) n Web control function ( v[...]
-
Página 72
69 Convenient functions NOTE • When “HDMI Control” – “Control” is set to “ON”, it consumes more standby power. • The HDMI control function controls operations of a TV that is compatible with the HDMI control function. Make sure that the TV and HDMI are connected when you perform HDMI control. • Some functions may not op[...]
-
Página 73
70 Convenient functions Adjusting the volume of the speakers You can adjust the channel level either according to the playback sources or to suit your taste, as described below. n Adjusting the volume of the different speakers 1 Press AMP to set the remote control unit to AMP-operation mode. 2 Press CH LVL . Front L Front R -8.0dB -12.0dB Subwoofer[...]
-
Página 74
71 Convenient functions AirPlay Enjoy music from your iTunes library with marantz quality sound anywhere in your home. Use the Apple Remote app z for iPhone, iPod touch and iPad to control iTunes from any room in your home. z Available as a free download from the App Store. n Setting procedure 1 Install iTunes 10, or later, on a Mac or Windows PC t[...]
-
Página 75
72 Party mode function The same network audio (Internet radio, Media server or iPod DIRECT) can be played on multiple marantz products equipped with the Party Mode function and connected in a network. The party mode consists of one organizer and up to four attendees. When one unit starts the party mode as the organizer, up to four devices on which [...]
-
Página 76
73 Zone Management function The status of devices connected to the same network can be displayed. Additionally, network menu browsers and volume controls can be performed via the network for the connected devices. This is useful when playing back network services of a device located in a separate room. Only devices compatible with the Zone Manageme[...]
-
Página 77
74 Operating a media controller to play music and still pictures • Perform this procedure using a media controller conforming to the DLNA (Digital Living Network Alliance) standard. • This function allows you to play content located on a computer (media server) or connected on a network by operating a media controller on the same network.[...]
-
Página 78
75 Web control function You can operate this unit using a browser. 1 Switch the “Network Standby” setting to “ON” ( v page 109 ). 2 Check the IP address of this unit with “Network Info.” ( v page 110 ). NETWORK INFO. DHCP IP Address MAC Address ON 000678000000 Friendly Name marantz:[SR6006] 192.168.100.19 RETURN Return Checking the IP a[...]
-
Página 79
76 Convenient functions G Example 2 H Setup menu screen SETUP MENU SOURCE SELECT Source Input Assign Video Video Select BD SOURCE Auto Video Mode Video Convert i/p Scaler Resolution (analog) Resolution (HDMI) Progressive Mode Aspect Auto Game ON OFF Movie Analog Analog & HDMI OFF Auto 480p/576p 1080i 720p 1080p 1080p:24Hz Auto 480p/576p 1080i 7[...]
-
Página 80
77 Convenient functions n Remembering set details (Ba ck up ) M-DAX ST A TUS Set the unit in the state you want remembering, and press and hold M-DAX and STATUS for at least 3 seconds. “MEMORY SAVING” is shown in the display, and the setting details are remembered. NOTE • The volume is not remembered. • If remembered details are overw[...]
-
Página 81
78 Convenient functions Various memory functions n Personal memory plus function This function sets the settings (input mode, surround mode, HDMI output mode, MultEQ ® XT, Dynamic EQ ® , audio delay etc.) last selected for the individual input sources. The surround parameters, tone settings and the volumes of the different speakers are stored for[...]
-
Página 82
79 Playback in ZONE2/ZONE3 (Separate room) • You can operate this unit so as to enjoy audio in a room (ZONE2, ZONE3) other than the MAIN ZONE (room where the unit is located). • You can simultaneously play back the same source in both the MAIN ZONE, ZONE2 and ZONE3. You can also play back separate sources in the MAIN ZONE, ZONE2 and ZONE3[...]
-
Página 83
80 Playback 1 Press Z2 or Z3 to set the remote control unit to ZONE2 or ZONE3 operation mode. 2 Press ON Z to turn on the ZONE2 or ZONE3 power. • “ZONE2” or “ZONE3” appears on the display. • When STANDBY X is pressed, ZONE2 or ZONE3 turns off. • Power in ZONE2 can be turned on or off by pressing ZONE2 ON/OFF or ZONE3 ON/OFF o[...]
-
Página 84
81 Sleep timer function This is useful when you want to sleep while listening in ZONE2 or ZONE3. 1 Press Z2 or Z3 to set the remote control unit to ZONE2 or ZONE3 operation mode. 2 Press SLEEP and display the time you want to set. • The time switches as shown below each time SLEEP is pressed. OFF 1 0 min 20 30 40 50 60 80 70 90 10 0 11 0 12 0 [...]
-
Página 85
82 Menu map For menu operation, connect a TV to this unit and display the menu on the TV screen. For menu operations, see the following page. How to make detailed settings Setting items Detailed items Description Page SOURCE SELECT Displayed items of the “SOURCE SELECT” menu differs, depending on the selected input source. Input Assign Changes [...]
-
Página 86
83 Examples of menu screen displays Typical examples are described below. G Example 1 H Menu selection screen (Top menu) SPEAKER SETUP Auto Setup Amp Assign Speaker Config. Bass Setting Distance Channel Level Make detailed speaker settings q List of GUI menu setup icons w Currently selected setup icon e Currently selected setup item r List of curre[...]
-
Página 87
84 Examples of menu Below we describe typical examples of displays on the TV screen. Menu display Description Top menu display AUDIO/VIDEO ADJUST Audio Adjust Picture Adjust Adjust various audio and video parameters w q Press AMP MENU to display the menu screen. w Displays the selected line. • Use ui to move to the item you want to set. Displa[...]
-
Página 88
85 Inputting characters You can change the names as desired using the “Rename” ( v page 91 ), “Preset Name” ( v page 93 ), “Napster Account” ( v page 110 ), “Last.fm Account” ( v page 110 ), “Zone Rename” ( v page113 ) and character input for the network functions. For inputting characters, there are two methods, [...]
-
Página 89
86 Inputting characters Cursor mode screen n Display of a cursor mode screen B D DVD VCR SAT GAME AUX1 AUX2 RENAME [1/2] RETURN Cancel Enter Input SEARCH Keyboard Default BD DVD VCR SAT GAME AUX1 AUX2 q w q Character input section (Maximum 8 characters) w Guide for operation buttons Using the cursor buttons 1 Display the screen for inputting charac[...]
-
Página 90
87 SOURCE SELECT Perform settings related to input source playback. • You do not have to change the settings to use the unit. Make settings when needed. Menu operation 1 Press AMP MENU . The menu is displayed on the TV screen. 2 Use ui to select the menu to be set or operated. 3 Press ENTER or p to enter the setting. • To return to the pr[...]
-
Página 91
88 SOURCE SELECT Setting items Setting details HDMI Set this to change the HDMI input connectors assigned to the input sources. BD DVD VCR SAT GAME AUX1 AUX2 TV HDMI 1 / HDMI 2 / HDMI 3 / HDMI 4 / HDMI 5 / HDMI 6 / HDMI 7 None : Do not assign an HDMI input connector to the selected input source. • At time of purchase, the settings of the diffe[...]
-
Página 92
89 Setting items Setting details DIGITAL Set this to change the digital input connectors assigned to the input sources. BD DVD VCR SAT GAME AUX1 AUX2 TV CD COAX (coaxial) 1, 2 / OPT (optical) 1, 2 None : Do not assign a digital input connector to the selected input source. • At time of purchase, the settings of the different input sources are [...]
-
Página 93
90 SOURCE SELECT Setting items Setting details Resolution Set the output resolution. You can set “Resolution” separately for HDMI output of the analog video input and HDMI input. BD DVD VCR SAT GAME z AUX1 AUX2 z TV z NET/USB Auto : The number of pixels the TV connected to the HDMI output connector supports is detected automatically and the app[...]
-
Página 94
91 Input Mode (Audio) Default settings are underlined. The input modes available for selection may vary depending on the input source. Setting items Setting details Input Mode Set the audio input modes for the different input sources. It is normally recommended to set the audio input mode to “Auto”. Auto : Automatically detect input signal and [...]
-
Página 95
92 Still Picture Default settings are underlined. Make settings for playing back still picture images. Setting items Setting details Slide Show Make slide show settings. NET/USB ON : Display still picture images in a slide show. OFF : The slide show is not played back. Interval Set the time for displaying a single image when playing back images in [...]
-
Página 96
93 SOURCE SELECT Preset Name Assign name to a preset memory. Setting items Setting details A1 – G8 Change the display name of the selected channel. TUNER • Up to eight characters can be input. • For character input, see page85 . Default The changed preset name is returned to the default setting. Yes : Reset to the defaults. No : Do n[...]
-
Página 97
94 AUDIO/VIDEO ADJUST Sound field effects for surround sound and video quality can be adjusted. Menu operation 1 Press AMP MENU . The menu is displayed on the TV screen. 2 Use ui to select the menu to be set or operated. 3 Press ENTER or p to enter the setting. • To return to the previous item, press RETURN . • Exiting the Menu, press AM[...]
-
Página 98
95 Audio Adjust n Surround Parameters Default settings are underlined. The items (parameters) that can be adjusted depend on the signal being input and the currently set surround mode. For details on the adjustable parameters, see “Surround modes and surround parameters” ( v page132 ). NOTE • Some setting items cannot be set while playb[...]
-
Página 99
96 AUDIO/VIDEO ADJUST n Tone Adjust the tonal quality of the sound. Setting items Setting details Tone Control Set the tone control function to ON and OFF. ON : Allow tone adjustment (bass, treble). OFF : Playback without tone adjustment. “Tone Control” can be set when “Dynamic EQ ® ” ( v page 97 ) is set to “OFF”. NOTE • “To[...]
-
Página 100
97 AUDIO/VIDEO ADJUST Setting items Setting details Dynamic EQ ® Solve the problem of deteriorating sound quality as volume is decreased by taking into account human perception and room acoustics. Works with MultEQ ® XT. ON : Use Dynamic EQ ® . OFF : Do not use Dynamic EQ ® . Reference Level Offset Audyssey Dynamic EQ ® is referenced to the st[...]
-
Página 101
98 AUDIO/VIDEO ADJUST n A-DSX Soundstage Default settings are underlined. Adjust Audyssey DSX™ setting and sound stage parameters. Setting items Setting details Audyssey DSX™ Provides more immersive surround sound by adding the new channels. ON–Height– : Turn on A-DSX processing for height expansion. ON–Wide– : Turn on A-DSX processing [...]
-
Página 102
99 AUDIO/VIDEO ADJUST M-DAX Default settings are underlined. Compressed audio formats such as MP3, WMA (Windows Media Audio) and MPEG-4 AAC reduce the amount of data by eliminating signal components that are hard for the human ear to hear. The M-DAX function generates the signals eliminated upon compression, restoring the sound to conditions near t[...]
-
Página 103
10 0 SYSTEM SETUP Set when changing Audyssey ® Auto Setup settings, or when changing the audio, video, display or other settings. • If you change the speaker settings after performing Audyssey ® Auto Setup, it will not be possible to set Audyssey MultEQ ® XT, Audyssey Dynamic EQ ® and Audyssey Dynamic Volume ® ( v page96 ). • Can [...]
-
Página 104
101 Speaker Setup Default settings are underlined. Perform when setting the speakers manually or when changing settings made in Audyssey ® Auto Setup. • If you change the speaker settings after performing Audyssey ® Auto Setup, it will not be possible to select Audyssey MultEQ ® XT, Audyssey Dynamic EQ ® and Audyssey Dynamic Volume ® ( v [...]
-
Página 105
10 2 SYSTEM SETUP Setting items Setting details Speaker Config. (Continued) Surr.Back : Set the presence, size and number of surround back speakers. • Large : Use a large speaker that can adequately play back low frequencies. • Small : Use a small speaker that has inadequate playback capacity for low frequencies. • None : Select whe[...]
-
Página 106
10 3 SYSTEM SETUP Setting items Setting details Distance Set distance from listening position to speakers. Measure beforehand the distance from the listening position to each speaker. Unit : Set the unit of distance. • Meters / Feet Step : Set the minimum variable width of the distance. • 0.1m / 0.01m • 1ft / 0.1ft Default : The “D[...]
-
Página 107
10 4 SYSTEM SETUP Setting items Setting details Crossover Freq. Set the maximum frequency of the bass signal output from each channel to the subwoofer. Set the Crossover Frequency to suit the bass reproduction capability of the speaker being used. 40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / 250Hz : Set the crossover frequenc[...]
-
Página 108
10 5 SYSTEM SETUP Setting items Setting details HDMI Control You can link operations with devices connected to HDMI and compatible with HDMI Control. Control : Set the HDMI control function. • ON : Use HDMI control function. • OFF : Do not use HDMI control function. • When a device that is not compatible with the HDMI control functio[...]
-
Página 109
10 6 SYSTEM SETUP Audio Setup Default settings are underlined. Make settings for audio playback. Setting items Setting details 7.1ch IN SW Level Set playback level of subwoofer signal input from the 7.1CH IN connector. +10dB : This is the recommended level. +15dB / +5dB / 0dB : Select the level according to the player being used. EQ Customize Set t[...]
-
Página 110
10 7 Network Setup Default settings are underlined. Make network settings. Setting items Setting details Network Connecting Make settings for wired LAN. Only set “Network Connecting” when connecting to a network without a DHCP function. Detail Exit NETWORK CONNECTING DHCP IP Address OFF 192.168.0.1 Enter Set IP address and proxy manually q Exit[...]
-
Página 111
10 8 SYSTEM SETUP Setting items Setting details Network Connecting (Continued) Proxy settings : Make this setting when connecting to the Internet via a proxy server. Detail Exit NETWORK CONNECTING DHCP IP Address OFF 192.168.0.1 Enter Set IP address and proxy manually q Exit Proxy NETWORK CONNECTING DHCP IP Address Subnet Mask Default Gateway Prima[...]
-
Página 112
10 9 SYSTEM SETUP Setting items Setting details Other Network function on/off setting during standby, and PC language setting. Network Standby : Set the network function on/off during standby. • ON : Network is on during standby. Main unit operable with a network compatible controller. • OFF : Suspend network function during standby. Set [...]
-
Página 113
11 0 SYSTEM SETUP Setting items Setting details Other (Continued) Update Notification : Displays a notification message on this unit’s menu screen when the latest firmware is released with “Firmware Update”. The notification message is displayed for about 20 seconds when the power is turned on. Connect to broadband Internet ( v page 19[...]
-
Página 114
111 SYSTEM SETUP Zone Setup Default settings are underlined. Set the audio to play back with multi-zone (ZONE2, ZONE3). Setting items Setting details Bass Adjust low frequency range (bass). –10dB – +10dB (0dB) Treble Adjust high frequency range (treble). –10dB – +10dB (0dB) HPF Make settings for cutting the low range to reduce distortion in[...]
-
Página 115
11 2 SYSTEM SETUP Option Setup Default settings are underlined. Make various other settings. Setting items Setting details Volume Control Set the MAIN ZONE (room where the unit is located) volume setting. Volume Display : Set how volume is displayed. • Relative : Display ---dB (Min), in the range –80.5 dB to 18 dB. • Absolute : Display [...]
-
Página 116
11 3 SYSTEM SETUP Setting items Setting details GUI (Continued) Master Volume : Display the master volume during adjustment. • Bottom : Display at the bottom. • Top : Display at the top. • OFF : Turn display off. When the master volume display is hard to see when superimposed on movie subtitles, set to “Top”. NET/USB : Set the NE[...]
-
Página 117
11 4 SYSTEM SETUP Setting items Setting details Setup Lock Protect settings from inadvertent change. ON : Turn protection on. OFF : Turn protection off. When canceling the setting, set “Setup Lock” to “OFF”. NOTE When “Setup Lock” is set to “ON”, the settings listed below can no longer be changed. Also, “Setup Lock!” is displaye[...]
-
Página 118
11 5 SYSTEM SETUP Language Default settings are underlined. Set the language for display on the menu screen. Setting details English / Deutsch / Français “Language” can also be set by the following procedure. However, the menu screen is not displayed. 1. Press and hold the main unit’s ZONE SELECT and STATUS for at least 3 seconds. “Video F[...]
-
Página 119
11 6 INFORMATION Show information about receiver settings, input signals, etc. Items Setting details Status Show information about current settings. n MAIN ZONE This item shows information about settings for MAIN ZONE. The information displayed differs according to the input source. Select Source / Name / Surround Mode / Input Mode / Decode Mode / [...]
-
Página 120
11 7 Other settings Remote control settings • When you connect a remote control receiver unit (purchased separately) to the REMOTE CONTROL IN connector of this unit, use the following procedure to disable the remote sensor function of this unit. • The remote sensor function of remote control signals is enabled by default. ON/ST ANDBY PURE[...]
-
Página 121
11 8 Operating the connected devices by remote control unit Registering the supplied preset codes in the remote control unit enables you to operate devices made by other manufacturers. Operating AV devices 1 Press the input source select button ( v page 27 ). The operation mode of the remote control unit is switched as shown in the table. NOTE Pres[...]
-
Página 122
11 9 Registering preset codes When preset codes are registered in the included remote control unit, it can then be used to operate any devices you have, such as DVD players or TVs made by different manufacturers. NOTE • No preset codes other than BD , DVD , SAT and TV can be registered. • In the factory settings, remote control codes for [...]
-
Página 123
12 0 Check the registered preset code 1 Press and hold down the input source select buttons for the appliance to control, and press SET until the SEND indicator blinks. 2 Press SEARCH/INFO . The LEARN indicator blinks twice. 3 To view the code for rst digit, press 1 . Count the number of times the LEARN indicator blinks (e.g. 3 blinks = 3) and w[...]
-
Página 124
12 1 Operating devices The supplied remote control unit can control a device other than this unit. 1 Press the input source select button to which the preset code for the device you want to operate has been registered ( v page 118 ). 2 Operate the device. • For details, refer to the device’s operating instructions. n Blu-ray Disc player / HD[...]
-
Página 125
12 2 n TV operation Operation buttons Function SOURCE Z / X TV power on/standby (Default : marantz) CLR Clear the inputting TV Z / X TV power on/standby (Default : marantz) TV INPUT Switch TV input (Default : marantz) CHANNEL +, – Switch channels (up/down) n Set top box for satellite (SAT) operation Operation buttons Function SOURCE Z / X Power o[...]
-
Página 126
12 3 Operating learn function • This remote control unit is capable of learning and storing codes used by other remote controls that you already own. • If the AV device is not a marantz device, or if the device does not operate even when the preset code is registered, use the learning function. Remote codes for different devices can be re[...]
-
Página 127
12 4 Registering preset codes Delete saved remote control codes Codes can be erased in three ways: by buttons, sources, and by all memory contents. n Delete remote control codes for each button 1 Press and hold down SET and SURROUND until the LEARN indicator blinks. The LEARN indicator blinks. 2 Press input source select buttons ( BD , DVD , SAT , [...]
-
Página 128
Information 12 5 F Part names and functions v page126 F Other information v page131 F Troubleshooting v page141 F Specifications v page145 F Index v page146 F List of preset codes v page148 Information Here, we list various information related to this unit. Please refer to this information as needed. Basic version Adv anced v ers[...]
-
Página 129
12 6 Front panel For buttons not explained here, see the page indicated in parentheses ( ). r t y u i o Q1 Q2 Q8 Q0 Q3 Q4 w q e Q5 Q6 Q7 Q9 W0 W1 W2 q Power indicator (STANDBY) ············································ ( C 5 ) G Power indicator status in standby mode H • Normal standby : Red •?[...]
-
Página 130
12 7 Display The input source name, surround mode, setting values and other information are displayed here. n Standard display q w q Master volume indicator w Input source indicator The currently selected input source name is displayed. If the input source name has been changed using “SOURCE SELECT” – “Rename” ( v page91 ) in the menu,[...]
-
Página 131
12 8 Rear panel See the page indicated in parentheses ( ). Q0 q w e r t y u i Q1 o Q4 Q5 Q6 Q7 Q3 Q2 q RS-232C connector ·································································· ( 67 ) w FM/AM antenna terminals ·······························?[...]
-
Página 132
12 9 Remote control unit For buttons not explained here, see the page indicated in parentheses ( ). r e w q y u o Q1 Q3 Q5 Q6 Q7 Q9 Q8 W3 W4 W6 W5 W0 W1 W2 W7 W8 Q4 Q2 Q0 t i R5 R6 R4 R3 R2 R1 E9 E8 E7 E4 E5 E2 E1 E0 W9 E3 E6 R0 q LEARN indicator ······························· ( 119 , 123 ) w SET button ······?[...]
-
Página 133
13 0 Remote control unit Inserting the batteries q Remove the rear lid in the direction of the arrow and remove it. w Load the two batteries properly as indicated by the marks in the battery compartment. R03/AAA e Put the rear cover back on. NOTE • Insert the specified batteries in the remote control unit. • Replace the batteries with ne[...]
-
Página 134
13 1 Other information n Trademark information ( v page131 ) n Surround ( v page132 ) n Relationship between video signals and monitor output ( v page136 ) n Explanation of terms ( v page138 ) Trademark information This product uses the following technologies: Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic[...]
-
Página 135
13 2 Surround This unit is equipped with a digital signal processing circuit that lets you play program sources in the surround mode to achieve the same sense of presence as in a movie theater. Surround modes and surround parameters This table shows the speakers that can be used in each surround mode and the surround parameters adjustable in each s[...]
-
Página 136
13 3 Surround Surround mode ( v page50 ) Surround Parameters ( v page95 ) Tone z 8 ( v page96 ) Audyssey Settings z 9 ( v page96 ) Audyssey DSX™ z 9 ( v page98 ) M-DAX z 12 ( v page99 ) Height Gain z 7 ( v page95 ) PRO LOGIC g / g x Music mode only NEO:6 Music mode only Panorama ( v page95 ) Dimension ( v page95 ) Cente[...]
-
Página 137
13 4 Surround n Types of input signals, and corresponding surround modes This table shows the input signal that can be played in each surround mode. Check the audio signal of the input source then select the surround mode. Symbols in the table S This indicates the selectable surround mode. Surround mode ( v page50 ) NOTE Input signal types and f[...]
-
Página 138
13 5 Surround Surround mode ( v page50 ) NOTE Input signal types and formats ANALOG PCM DTS-HD DTS DOLBY DOLBY DIGITAL PCM (multi ch) PCM (2ch) DTS-HD Master Audio DTS-HD High Resolution Audio DTS EXPRESS DTS ES DSCRT (With Flag) DTS ES MTRX (With Flag) DTS (5.1ch) DTS 96/24 DOLBY TrueHD DOLBY DIGITAL Plus DOLBY DIGITAL EX (With Flag) DOLBY DIGI[...]
-
Página 139
13 6 Relationship between video signals and monitor output MAIN ZONE MONITOR OUT Video Convert Input connector Output connector Menu displayed HDMI COMPONENT VIDEO HDMI COMPONENT VIDEO HDMI COMPONENT VIDEO ON/OFF A A A A A A Only the menu is displayed ON A A S S <VIDEO> S <VIDEO> S <VIDEO> S (VIDEO) S (VIDEO) S (VIDEO) ON A S (108[...]
-
Página 140
13 7 Video signal resolution conversion table When “Video Convert” ( v page 90 ) is set to “ON”, “i/p Scaler” ( v page 90 ) is set to “Analog”, “Analog & HDMI” or “HDMI” are set, the resolution of the input video signal can be converted to a different resolution for output ( v page5 “Converting input video sig[...]
-
Página 141
13 8 Explanation of terms A A2DP A2DP is one profile of Bluetooth definded for in-car devices or AV devices that use wireless communication instead of a cable. Adobe RGB color, Adobe YCC601 color Like “x.v.Color”, each of these color spaces defines a palette of available colors that is larger than the traditional RGB color model. AirPlay Air[...]
-
Página 142
13 9 Dolby Digital Plus Dolby Digital Plus is an improved Dolby Digital signal format that is compatible with up to 7.1 channels of discrete digital sound and also improves sound quality thanks to extra data bit rate performance. It is upwardly compatible with conventional Dolby Digital, so it offers greater flexibility in response to the source s[...]
-
Página 143
14 0 Explanation of terms H HDCP When transmitting digital signals between devices, this copyright protection technology encrypts the signals to prevent content from being copied without authorization. HDMI This is an abbreviation of High-Definition Multimedia Interface, which is an AV digital interface that can be connected to a TV or amplifier.[...]
-
Página 144
14 1 Troubleshooting If a problem should arise, first check the following: 1. Are the connections correct? 2. Is the set being operated as described in the owner’s manual? 3. Are the other devices operating properly? If this unit does not operate properly, check the items listed in the table below. Should the problem persist, there may be a malf[...]
-
Página 145
14 2 G Audio H Symptom Cause/Solution Page Audio is not output. • Check the connections for all devices. • Check the speaker connections and configurations. • Check whether the audio device power is turned on. • Adjust the master volume. • Cancel the mute mode. • Select a suitable input source. • Select a suitabl[...]
-
Página 146
14 3 G Internet radio / Media server / iPod / USB memory device / Flickr / Last.fm / Napster H Symptom Cause/Solution Page When a USB memory device is connected, “USB” is not displayed on the menu. • The set cannot recognize a USB memory device. Check the connection. • A USB memory device not conforming to mass storage class or MTP st[...]
-
Página 147
14 4 G AirPlay H Symptom Cause/Solution Page The AirPlay icon is not displayed in iTunes or on the iPhone/iPod touch/ iPad. • This unit and the computer or iPhone/iPod touch/iPad are not connected to the same network (LAN). Connect the computer or iPhone/iPod touch/iPad to the same network as this unit. • iTunes or the iPhone/iPod touch/i[...]
-
Página 148
14 5 Specifications n Audio section • Power amplifier Rated output: Front: 110 W + 110 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.) Center: 110 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.) Surround: 110 W + 110 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.) Surround back: 110 W + 110 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.) Maximum eff[...]
-
Página 149
14 6 v Numerics 2.1-channel ························································· 62 3D ········································································· 7 5.1-channel ····················[...]
-
Página 150
14 7 v M Maintenance Mode ·········································· 115 MAIN ZONE ····················································· 140 Manual EQ ····················································[...]
-
Página 151
14 8 List of preset codes Device select : BD Blu-ray Disc Player D Denon 5034, 5035, 5036 H Hitachi 5031, 5032, 5033 I Integra 5013 J JWC 5014, 5015, 5017, 5018, 5019, 5020 L LG 5010, 5011 M marantz 5000, 5026, 5027 Mitsubishi 5024, 5025 O Onkyo 5013 P Panasonic 5001, 5002, 5003 Philips 5004 Pioneer 5005 R RCA 5012 S Samsung 5005 Sharp 5028, 5029, [...]
-
Página 152
14 9 Dimensions Unit : mm 348.5 389.0 13.0 148.0 161.0 440.0 18 22.5 Weight : 11.4 kg Basic version Adv anced version Infor mation Infor mation[...]
-
Página 153
D&M Holdings Inc. 3520 1 0046 032M V00[...]