Miele 09 596 090 manual

Operating and Installation Instructions Gas cooktop To prevent accidents and machine damage, read the Operating Manual before installation or use. M.-Nr. 09 596 090 e n-U S[...]

2 WARNING: If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury or death. – Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. – WHAT TO DO IF YOU SMELL GAS ß Do not try to light any appliance. ß Do not[...]

IMPORTANT SAFETY INSTRUCTIONS .................................4 Description of the appliance .........................................8 Before the first use ...............................................1 1 Using the cooktop ................................................1 2 Control knobs .....................................................1 2 [...]

WARNING - When using your gas appliance follow basic precautions, including the following: This gas cooktop conforms to all uniform safety codes and regulations. Read all instructions before installation or use to prevent injury and appliance damage. These instructions contain important information on installation, safety, use and maintenance of th[...]

Technical safety ~ Installation, repair and maintenance work should be performed by a Miele authorized service technician in accordance with local building and safety codes. Work by unqualified persons could be dangerous and may void the warranty. ~ Before installing the cooktop, check for externally visible damage. Do not operate a damaged applian[...]

Safety ~ The appliance is hot during use and remains so for some time after being switched off. Be careful not to touch the appliance if it may still be hot. ~ Do not heat empty pots or pans. This may cause damage to the cookware and the surrounding area. Danger of fire. ~ Do not leave the cooktop unattended while in use. Boil-overs cause smoking, [...]

~ Only certain types of glass, ceramic or other glazed cookware are suitable for use on a cooktop without breaking due to the sudden temperature change. ~ Do not use containers made of plastic or aluminium. They may melt at high temperatures. ~ The burner grates supplied with the appliance must always be used. Never place a pan on the burner by its[...]

Cooktop a Auxiliary burner b High-speed burner c Double-insert super burner d Normal burner e Normal burner f Grate (three pieces) Controls: g Front left h Back left i Middle j Back right k Front right Description of the appliance 8[...]

Burners Double-insert super burner a Outer burner cap b Inner burner cap c Burner head d Burner base e Ignition safety device f Ignitor Auxiliary, normal and high-speed burners a Burner cap b Burner head c Ignition safety device d Ignitor e Burner base Description of the appliance 9[...]

Standard accessories You can re-order standard accessories and optional accessories as needed. Wok ring The wok ring (supplied) is included for added stability, especially for woks with round bases. Trivet For small and large pans, see "Cookware". Description of the appliance 10[...]

Adhere the data plate sticker, which is included with the appliance documents, on the appropriate place marked in "Technical Service". Cleaning the cooktop ^ Remove any protective films. ^ Wash the removable parts of the gas burner in a mild solution of warm water and liquid dish soap. ^ Dry and reassemble the parts in the correct order ([...]

To turn the burner on, press and turn the knob toward the LEFT only. To turn the burner off, turn the knob to the RIGHT only. The outer burner of the double-insert super burner requires you to press the knob down while turning it in order to get from the high flame to the low flame zone. The appliance can be damaged if you: - turn the knob without [...]

Turning on , Do not leave the appliance unattended whilst it is being used. ^ To light the burner, press the corresponding burner control knob and turn it to the left to the largest flame symbol. Pressing a burner control knob automatically generates a spark at all burners on the cooktop. This is normal and does not indicate a faulty appliance. ^ W[...]

Regulating The inner and outer burners of the double-insert super burner are both controlled by one control knob. There is a stop at the 6 o’clock position that requires you to press the knob down while turning it in order to get from the high flame to the low flame zone. ^ To reduce the flames from a high to a low setting, turn the burner contro[...]

Pan size – Select the cookware to match the burner: large diameter = large burner small diameter = small burner. – Using oversized pans may cause the flames to spread out and damage the surrounding countertop or other countertop appliances. The proper pan size will also improve efficiency. – Pots with a smaller diameter than the grate(s) and [...]

– If possible, cook in covered pots or pans. This prevents unnecessary heat loss. – Cook with less water. – The cooking time can be significantly reduced by using a pressure cooker. – After cooking or frying, promptly set to a lower flame. – Generally, wide / shallow pans will heat quicker and cook more evenly than narrow / tall ones. Ene[...]

Ignition safety control The appliance is equipped with an Ignition safety control. This control cuts the gas supply if the flame goes out, e.g. from a boilover or a draft. Any further escape of gas is prevented. ^ To reignite the burner knob clockwise to " ß " and then turn it on as usual. The Ignition safety control works independently [...]

, Never use a steam cleaner to clean this cooktop. Pressurized steam could cause permanent damage to the surface and to components. Keep the ignitor in the burner dry. If it gets wet it will not spark. – Clean the appliance after each use. Let the appliance cool to a safe temperature before cleaning. – Dry your cooktop thoroughly after cleaning[...]

Cleaning Tips Stainless steel Clean with a sponge and a mild solution of liquid dish soap and warm water. If necessary, use the rough side of the sponge and the Miele Ceramic and stainless steel cleaner. Make sure to only use the product in the direction of the grain. To keep the surfaces from quickly becoming soiled again, we recommend treatment w[...]

Auxiliary, normal and high-speed burners ^ Place the burner head b on to the burner base e so that the ignition safety device c and the ignitor d extend through their respective holes in the burner head. The burner head must click into place correctly. ^ Place burner cap a flat over burner head b . When correctly positioned it will not slide about.[...]

, Repairs should only be carried out by an authorized technician in accordance with local and national safety regulations. Unauthorized repairs could cause injury or appliance damage. Problem Cause and solution The burner doesn't ignite when lit for the first time, or when it has not been used for an unusually long time. There might be air in [...]

Problem Cause and solution Gas flame goes out after ignition. The flames don't reach the ignition safety device, it doesn't get hot enough. – The burner is assembled incorrectly. ^ Position the burner parts correctly. – The ignition safety device is soiled. ^ Remove the soiling. The shape of the gas flame varies The burner parts are n[...]

In the event of a fault which you cannot easily fix yourself, please contact the Miele Technical Service Department at the address on the back of this booklet. When contacting Technical Service please quote the serial number and model of the cooktop. This information is visible on the silver data plate supplied with the cooktop. Adhere the data pla[...]

24[...]

Installation Instructions IMPORTANT: SAVE FOR THE LOCAL ELECTRICAL INSPECTOR'S USE Information is subject to change. Please refer to our website to obtain the most current product specification, technical & warranty information. To prevent accidents and appliance damage read these instructions before installation or use. Technical Service [...]

Installation The minimum distances given in these Installation instructions are to combustible surfaces, and must be observed to ensure safe operation. Failure to do so increases the risk of fire. The cabinetry and venting hood should be installed first to prevent damage to the cooktop. ~ Gas appliances should only be installed in a well ventilated[...]

Safety distances above the appliance The minimum safety distance given by the hood manufacturer must be maintained between the cooktop and the hood above it. See the installation instructions of the hood for these safety measurements. If the hood manufacturers instructions are not available or if flammable objects are installed over the cooktop (e.[...]

Safety distances When installing a gas cooktop, there may be cupboard or room walls of any size on the rear side and on one side (right or left) (see illustrations). The following minimum safety distances must be maintained: a 2" (50 mm) minimum distance at the rear of the countertop cutout to the rear edge of the countertop. b 5 7/8" (15[...]

a Appliance front b Installation height c Gas connection d Power supply box with connection cable ,L=4f t (1.2 m) e Stepped cut-out for granite or marble worktops Please take careful note of the detailed diagrams for the cut-out dimensions in granite and marble countertops. Installation dimensions 29[...]

Flush mounted gas cooktops are only suitable for installation in granite, marble, tiled or solid wood countertops. If installing into a countertop made from any other material, please check first with the countertop manufacturer that it is suitable for installing a flush mounted cooktop. This appliance requires a 36 7/16" (900 mm) wide base un[...]

Granite and marble countertops a Countertop b Cooktop c Gap As the ceramic glass and the countertop cut-out have a certain dimensional tolerances, the size of gap c can vary. ^ Make the countertop cut-out as shown in "Installation dimensions". Remember to maintain the minimum safety distances (see "IMPORTANT INSTALLATION SAFETY INSTR[...]

Solid wood and tiled worktops a Countertop b Cooktop c Gap d Wooden frame 1/4" (7 mm) (to be provided on site) As the ceramic glass and the countertop cut-out have a certain dimensional tolerance, the size of gap c can vary. ^ Make the countertop cut-out as shown in "Building-in dimensions". Remember to maintain the minimum safety di[...]

Secure the appliance as shown, using the fixing brackets supplied. 3/4" (20 mm) countertop 1 1/4" (30 mm) countertop 1 1/2" (40 mm) countertop After installation Check that all the burners are operating correctly. The flame must not go out on the lowest setting, or when the control is turned quickly from a high to a low setting. On t[...]

This appliance must be grounded according to local or national codes. All electrical work should be performed by a qualified electrician in accordance with local codes and with the: - National Electrical Code ANSI / NFPA No. 70 for the USA or - Canadian Electrical Code Part I for Canada (CSA Standard C 22.1). , WARNING Disconnect the appliance from[...]

Wiring diagram , Caution: Label all wires prior to disconnection when servicing controls. Wiring errors can cause improper and dangerous operation. Verify proper operation after servicing. Electrical connection 35[...]

Installation and service must be performed by a qualified installer, service agency or gas supplier. In Massachusetts installation must be performed by a licensed plumber/gas fitter. This appliance must be installed with its own shut off valve and the included gas pressure regulator. Both the valve and the regulator must be easily accessible to the[...]

Gas pressure regulator A pressure regulator that is convertible from natural to LP gas (Propane) or vice versa is included with the appliance. The included regulator corresponds with the gas type of the appliance. Verify before installing. The adjusted pressure is: natural gas - 4" w.c. LP gas - 10" w.c. a Appliance b ½" NPT c Regul[...]

The applinace should have been ordered for connection to either natural gas or LP gas (propane). If the appliance is not configured for the proper type of gas connection please contact your Miele Dealer. If the appliance is to be connected to a type of gas other than it was originally configured for, both the regulator and burners must be converted[...]

Rated load at high setting Burner Type of gas KM 2355 BTU/hr kW Auxiliary burner Natural gas (NG) Liquid gas (LP) 3,900 3,000 1.14 0.88 Normal burner Natural gas (NG) Liquid gas (LP) 5,900 6,000 1.73 1.76 High-speed burner Natural gas (NG) Liquid gas (LP) 9,800 9,500 2.87 2.78 Double-insert super burner Natural gas (NG) Liquid gas (LP) 13,000 15,00[...]

Disposal of packing materials The cardboard box and packing materials are biodegradable and recyclable. Please recycle. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children. Danger of suffocation! Disposal of an old appliance Old appliances contain materials that can be recycled. Please contact [...]

41[...]

42[...]

43[...]

M.-Nr. 09 596 090 / 00 e n-U S KM 2355[...]