Mitsubishi Electronics CP900DW manual

DIGITAL COLOR PRINTER MODEL CP900DW OPERATION MANUAL THIS OPERATION MANUAL IS IMPORTANT TO YOU. PLEASE READ IT BEFORE USING YOUR DIGITAL COLOR PRINTER. FEED&CUT RESET COPY This digital color printer complies with the requirements of the EC Directive 89/336/EEC, 73/23/EEC, 93/42/EEC and 93/68/EEC. The electro-magnetic susceptibility has been cho[...]

INFORMA TION This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. MEDICAL EQUIPMENT WITH RESPECT TO ELECTRIC SHOCK, FIRE AND MECHANICAL HAZARDS ONL Y IN ACCORDANCE WITH UL 2601-1 AND CAN/CSA C22.2 NO. 60601.1. 57RF According to Clause 5 in UL 2601-1 sec 6.[...]

CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE P AR TS INSIDE REFER SER VICING T O QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dan[...]

1 CONNECTIONS PRECAUTIONS FEA TURES PREP ARA TION TROUBLE- SHOOTING OTHERS CONTENTS Contents ................................................................................................ 1 Safety precautions ................................................................................ 2-4 Special features .....................................[...]

2 SAFETY PRECAUTIONS In the interest of safety , please observe the following precautions: POWER REQUIREMENT This product is designed for operation on 120V AC or 220-240V AC 50/60Hz. Never connect to any outlet or power supply having a different voltage or frequency . W ARNING: THIS APP ARA TUS MUST BE GROUNDED. A VERTISSEMENT : CET APP AREIL DOIT [...]

3 CONNECTIONS PRECAUTIONS FEA TURES PREP ARA TION TROUBLE- SHOOTING OTHERS INST ALLA TION LOCA TIONS MAINT AIN GOOD VENTILA TION V entilation slots and holes are provided on the rear , sides and bottom of this unit. Place the unit on a hard and level surfac e and locate at least 4 inches (10 cm) from walls to insure proper ventilation. When install[...]

4 OTHER CAUTIONS Dust or other foreign matter adhering to the print paper or the sheet cartridge, or deformation resulting from exposure to extremely low or high temperatures could cause loss of color , uneven color or lines, or wrinkles in the print images. NOTE: MEMORIZED IMAGES ARE STORED IN VOLA TILE MEMOR Y AND MA Y BE LOST IN THE EVENT OF POW[...]

5 CONNECTIONS PRECAUTIONS FEA TURES PREP ARA TION TROUBLE- SHOOTING OTHERS SPECIAL FEA TURES 2 PRINT SIZES ARE A V AILABLE DEPENDING ON INK SHEET 2 printing sizes, L size (max.1 10 x 162 mm) and S size (max.1 10 x 105 mm), are selectable. HIGH SPEED PRINTING Printing speed is approx. 12 seconds (in S size print). LARGE CAP ACITY PRINT MEDIA S size [...]

6 UNP ACKING T ake the unit out of the box by the following procedures. Make sure to check the contents. Open the top of the box. UNP ACKING C O L O U R V ID E O C O P Y P R O C E S S O R Unwrap the packing. T ake the unit out of the box carefully . Make sure to keep the unit horizontal. Remove the cushion with contents. Be careful not to drop the [...]

7 CONNECTIONS FEA TURES PREP ARA TION OTHERS TROUBLE- SHOOTING PRECAUTIONS FEA TURES & FUNCTIONS FRONT P ANEL FEED&CUT RESET COPY POWER BUTTON(INDICA TOR) Press to turn on power . Press again to turn off power . When the power is turned on, the indicator illuminates. ALARM INDICA TOR When this unit is overheated, this lamp flashes. When oth[...]

8 REAR P ANEL REMOTE TERMINAL T erminal connection for service remote only . This terminal is to be used by qualified service personnel only . MODE SWITCHES Used to set the various functions of this unit. See page 10. USB CABLE CLAMPER Use this clamper so that the USB port is not disconnected. AC LINE REMOTE USB OFF ON 8 7 6 5 4 3 2 1 6 1 2 4 5 3 U[...]

9 CONNECTIONS PRECAUTIONS FEA TURES PREP ARA TION TROUBLE- SHOOTING OTHERS CONNECTIONS CONNECTION WITH USB INTERF ACE CONNECTING WITH PC Connect this unit with a personal computer as following example. AC LINE REMOTE USB OFF ON 8 7 6 5 4 3 2 1 To USB port Personal computer Printer To USB port[...]

10 SETTING MODE SWITCHES CONNECTIONS SETTING MODE SWITCHES Set the mode switches on the rear panel according to the equipment connected. All the switches are set to OFF as shown right when shipped from the factory . T urn off the power when changing the mode switch settings. With the switch No.1 and No. 2, the printing speed can be set. Switch No. [...]

11 CONNECTIONS PRECAUTIONS FEA TURES PREP ARA TION TROUBLE- SHOOTING OTHERS BEFORE OPERA TION Before printing, 1. Unlock the printing mechanism. (See below) 2. Install the print paper and ink cassette. (pages 1 1-15) 1 2 P APER SHEET SET Make sure to use the following types of paper sheet and ink sheet set. P APER SHEET SET Product name Ink sheet s[...]

12 BEFORE OPERA TION Set the other side of roller without gear . Remove the seal, and insert the edge of the print paper right below the roller cover with arrow marks towards the front panel. Make sure to insert the paper straight. Feed the print paper through the paper outlet. Pull both sides of the print paper to eliminate slack. 1 Paper Paper Pa[...]

13 CONNECTIONS PRECAUTIONS FEA TURES PREP ARA TION TROUBLE- SHOOTING OTHERS INST ALLA TION OF INK SHEET INST ALLING THE INK SHEET Load the ink sheet roll to the ink cassette before inserting the ink cassette into the printer . Insert the ink sheet rollers gear into the holes of the ink cassette. Put the white roller (rolled with ink sheet) to the i[...]

14 NOTE • Do not feed the print paper more than 2 times. Doing so will not allow the number of prints indicated on page 1 1 to be printed. The installation of print paper and ink cassette is completed. NOTE An IC is built in the ink sheet. This is the IC chip, not a battery . This IC can be thrown away as normal waste. 1 1 BEFORE OPERA TION 2 2 I[...]

15 CONNECTIONS PRECAUTIONS FEA TURES PREP ARA TION TROUBLE- SHOOTING OTHERS USAGE AND ST ORAGE OF P APER SHEET SET BEFORE PRINTING • Fingerprints or dust on the paper ’ s surface may degrade print quality and cause paper jams. Immediately after the paper is replaced, 2 images may be printed with a blank part due to fingerprints. Refer to Pages [...]

16 INST ALLING PRINTER DRIVER A printer driver is required to print the data from a personal computer connected with this unit. The printer driver for Windows ® is supplied with this unit. Product name CPD900W CPD900N0 Operating conditions Applies for Microsoft ® Windows ® 98 and Windows ® Me Applies for Microsoft ® Windows ® 2000 and Windows[...]

17 CONNECTIONS PRECAUTIONS FEA TURES PREP ARA TION TROUBLE- SHOOTING OTHERS TROUBLESHOOTING If for some reason printing is not possible or error occurs during printing, the indicators on the front panel will be lit. In this case, follow the procedure described below . ALARM Causes Countermeasures • Set a new roll of paper . Refer to pages 1 1-13.[...]

18 TROUBLESHOOTING BEFORE CALLING FOR SERVICE Use the following troubleshooting chart to try to resolve any apparent defect in operation. If you are unable to resolve the problem, unplug the power cord and contact your dealer . Symptom Check and Remedy No power Is the power cord plug disconnected from the outlet? (when POWER lamp does not illuminat[...]

19 CONNECTIONS PRECAUTIONS FEA TURES PREP ARA TION TROUBLE- SHOOTING OTHERS Press OPEN button to pull out the printing mechanism. When it is not working, reset the power . Then try to press OPEN button again. Remove the ink cassette with ink sheet. Remove the print paper as shown right. Cut the defective part of the print paper with scissors. Cut b[...]

20 CLEANING Cleaning part A small amount of alcohol How to hold tissue paper Cleaner pen (Option) Ink sheet sensor Front panel Rubber roller Cleaning as indicated below will help maintain stable printer operation and extend the printer ’ s life. Preparations Alcohol (isopropyl alcohol) T issue paper (Fold in half about 4 times, and use the folded[...]

21 CONNECTIONS PRECAUTIONS FEA TURES PREP ARA TION TROUBLE- SHOOTING OTHERS SPEC & OPTIONS SPECIFICA TIONS Class Digital color printer Model CP900DW Printing method Thermal Dye Sublimation 3 colour faces progressive printing (yellow , magenta and cyan) and surface lamination Print quality Dot resolution Max. 1280 x 960 pixels (S size) 325 PPI M[...]

Made from recycled paper PRINTED IN JAP AN 871C593A4 Manufactured by Mitsubishi Electric Corporation 1 Zusho Baba, Nagaokakyo-city , Kyoto Japan Mitsubishi Electric Europe B.V . UK Branch T ravellers Lane, Hatfield, Herts. AL10 8XB, England, U.K. Phone (0) 1707 276100 F AX (0) 1707 278755 German Branch Gothaer Strasse 8, 40880 Ratingen ; Postfach 1[...]