Mitsubishi Electronics Diamond Pro 750SB, Diamond Plus 93SB manual

User’s Manual[...]

Declaration of the Manufacturer NEC-Mitsubishi Electric Visual Systems Corporation 686-1, Nishioi Oi-Machi Ashigarakami-gun Kanagawa 258-8533, Japan We hereby certify that the colour monitor Diamond Pro 750 SB / Diamond Plus 93 SB is in compliance with Council Directive 73/23/EEC: – EN 60950 Council Directive 89/336/EEC: EN 55022 – EN 61000-3-2[...]

CA UTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICE- ABLE P A R TS INSIDE. REFER SERVICING T O QUALIFIED SERVICE PERSONNEL. RISK OF ELECTRIC SHOCK • DO NOT OPEN This symbol warns user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock. Therefore, it is [...]

4 User’s Manual Content s * Remember to save your original box and packing material to transport or ship the monitor. CD-ROM Y our new Diamond Pro 750 SB / Diamond Plus 93 SB monitor box* should contain the following: • Diamond Pro 750 SB / Diamond Plus 93 SB Monitor with tilt/swivel base • Power Cord • Captive Signal Cable • User’s Man[...]

Diamond Pro 750 SB / Diamond Plus 93 SB 5 Quick S t art T o attach the Diamond Pro 750 SB / Diamond Plus 93 SB monitor to your system, follow these instructions: 1. T urn off the power to your computer . 2. If necessary , install the display card into your system. For more information, refer to the display card manual. 3. For the PC: Connect the 15[...]

Quick S t art – continued 6 User’s Manual Figure C.1 Power Outlet Power Cord Power Button Figure D.1[...]

Controls OSM (On-Screen Manager) control buttons on the front of the monitor function as follows: Brightness/Contrast Controls Brightness: Adjusts the overall image and background screen brightness. Contrast: Adjusts the image brightness in relation to the background. Degauss: Eliminates the buildup of stray magnetic fields which alter the correct [...]

Controls – continued 8 User’s Manual Color Control System Colour presets selects the desired colour setting. The bar is replaced by the colour setting choice. Each colour setting is adjusted at the factory to the stated Kelvin. If a setting is adjusted, the name of the setting will change from Kelvin to Custom except sRGB mode. Red, Green, Blue[...]

Diamond Pro 750 SB / Diamond Plus 93 SB 9 Controls – continued T ools 2 Language: OSM controls menus are available in 6 languages. OSM Position: Y ou can choose where you would like the OSM controls menu to appear on your screen. Selecting OSM Position allows you to manually adjust the OSM controls menu position from among Center , T op left, T o[...]

Recommended Use 10 User’s Manual Safety Precautions and Maintenance • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualified service personnel. • Do not spill any liquids into the cabinet or use your monitor n[...]

Diamond Pro 750 SB / Diamond Plus 93 SB 11 Recommended Use – continued • Adjust the monitor height so that the top of the screen is at or slightly below eye level. Y our eyes should look slightly downward when viewing the middle of the screen. • Position your monitor no closer than 40 cm and no further away than 60 cm from your eyes. The opti[...]

Specifications 12 User’s Manual NOTE: T echnical specifications are subject to change without notice. ............... r o t i n o M s n o i t a c i f i c e p S 0 5 7 o r P d n o m a i D B S r o t i n o M s e t o N e b u T e r u t c i P: l a n o g a i Dh c n i 7 1 / m c 3 4, h c t i p e l l i r g m m 5 2 . 0 , n o i t c e l f e d ° 0 9 , r o h p [...]

Diamond Pro 750 SB / Diamond Plus 93 SB 13 Specifications – continued NOTE: T echnical specifications are subject to change without notice. .............. r o t i n o M s n o i t a c i f i c e p S 3 9 s u l P d n o m a i D B S r o t i n o M s e t o N e b u T e r u t c i P: l a n o g a i Dh c n i 9 1 / m c 0 5e l l i r g m m 7 2 . 0 / 5 2 . 0 , n [...]

Features 14 User’s Manual SuperBright Diamond tron CRT : This patented flat aperture grille CRT delivers an exceptional viewing experi- ence with unprecedented brightness and contrast and a virtually flat image that reduces distortion and glare so that what you see on-screen is what you get on your printed output. The state-of-the-art Mitsubishi [...]

Diamond Pro 750 SB / Diamond Plus 93 SB 15 T roubleshooting No picture • Display card should be completely seated in its slot. • Power Button and computer power switch should be in the ON position. • Signal cable should be completely connected to display card/computer . • Check connector for bent or pushed-in pins. Image is scrolling or uns[...]

TCO’99 16 User’s Manual Diamond Pro 750 SB / Diamond Plus 93 SB Congratulations! Y ou have just purchased a TCO’99 approved and labeled product! Y our choice has provided you with a product developed for professional use. Y our purchase has also contributed to reducing the burden on the environment and also to the further develop- ment of env[...]

TCO’99 – continued TCO’99 demand requires that plastic components weighing more than 25 grams must not contain flame retar- dants with organically bound chlorine and bromine. Flame retardants are allowed in the printed circuit boards since no substitutes are available. Lead** Lead can be found in picture tubes, display screens, solders and ca[...]