Multiquip 8FP Series manual

OPERATION AND PARTS MANUAL Electric and Gasoline Floor Planers Model 8FP Series Revision #2 ( 05/28/09 ) T o find the latest revision of this publication, visit our website at: www .multiquip.com THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES[...]

[...]

TABLE OF CONTENTS 8FP FLOOR PLANER-SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 3 MULTIQUIP FLOOR PLANERS 8FP SERIES Table Of Contents .............................................................................................................. ................... 3-4 Parts Orderi ng Proc edures .......................................[...]

TABLE OF CONTENTS 8FP FLOOR PLANER-SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 4 Storage ........................................................................................................................ ......................... 46 Specific ations .................................................................................[...]

8FP FLOOR PLANER-SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 5 NOTE PAGE[...]

PARTS PARTS ORDERING PROCEDURES 8FP FLOOR PLANER-SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 6 www .m ultiquip .com Or dering par ts has never been easier! Choose from thr ee easy options: WE A CCEPT ALL MAJOR CREDIT CARD S ! When ordering parts, please supply: ❒ Dealer Account Number ❒ Dealer Name and Addre ss ❒ S hipping Addre[...]

NOTICE TO OPERATORS 8FP FLOOR PLANER-SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 7 IF YOU CAN NOT READ OR DO NOT FULLY UNDERSTAND THE CONTENTS OF THIS MANUAL, PLEASE CONTACT THE FACT ORY FOR PROPER ASSISTANCE BEFORE ATTEMPTING TO OPERATE THIS PRODUCT. SI TU NO PUEDES LE'ER O NO COM PRENDES EL CONTENIDO DE ESTE MANUAL FAVOR DE PON[...]

NOTICE TO OPERATORS 8FP FLOOR PLANER-SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 8 The concept of frame mounted type FLOOR PLANERs has been successfully utilized for many years as a practical solution to many types of random FLOOR PLANER requirements. The basic concept is proven and well accepted within the associated marketplaces. Us[...]

OPERATOR INSTRUCTIONAL DATA SHEET 8FP FLOOR PLANER-SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 9 The following undersigned oper a tors of the 8FP Series FLOOR PLANERS described a nd/or pert a ining to this Oper a tor M a nu a l h a ve received form a l s a fety a nd oper a tion a l inform a tion/instruction from the undersigned owner([...]

SAFETY PRECAUTIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 10 THE FOLLOWING SAFETY PRECAUTIONS PROVIDE SOME COMMON SENSE GUIDES TO PROMOTE SAFETY AND EFFICIENCY WITH THE FLOOR PLANER. NO WARRANTY, GUARANTEE OR REPRESENTATION IS MADE BY THE MANUFACTURER AS TO THE ABSOLUTE CORRECTNESS OR SUFFICIENCY OF ANY INFORMATI[...]

SAFETY PRECAUTIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 11 6) Prolonged use of the FLOOR PLANER (or other, simil a r m a chines) exposes the oper a tor to vibr a tions which m a y produce Whitefinger Dise a se (R a yn a ud's Phenomenon). This phenomenon reduces the h a nd's a bility to feel a nd regul[...]

SAFETY PRECAUTIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 12 13) Never exceed the recommended c a p a cities of the FLOOR PLANER. Refer to the Specifications section of this m a nu a l for more det a iled inform a tion. OPERATION. 1) Give complete a nd undivided a ttention to the job a t h a nd. Do not chew gum, [...]

SAFETY PRECAUTIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 13 skill/common sense m a y dict a te th a t a different type of m a chine (with ch a r a cteristics of higher purch a se cost, being mounted to a c a rrier vehicle, with gre a ter horsepower a nd less mobility), method a nd/or process be utilized to prope[...]

ASSEMBLY INSTRUCTIONS/OPERATIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 14 Assembly The 8FP Series Floor Pl a ner a re shipped from the f a ctory secured on a speci a lly designed wooden p a llet a nd protected from extern a l d a m a ge by a corrug a ted c a rton or wood cr a te. If shipped with a corrug a ted c[...]

ASSEMBLY INSTRUCTIONS/OPERATIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 15 3) Using the funnel, fill the fuel t a nk with fresh, cle a n fuel a ccording to the specific a tions outlined in the m a teri a l supplied by the engine m a nuf a cturer. Do not overfill the t a nk or spill a ny fuel. If the fuel t a nk i[...]

ASSEMBLY INSTRUCTIONS/OPERATIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 16 the use of a n a ggressive fl a il configur a tion bec a use of productivity a nd cost consider a tions. Less a ggressive fl a il configur a tions c a n then be utilized for the fin a l finishing sequence. Gener a lly spe a king, the more [...]

ASSEMBLY INSTRUCTIONS/OPERATIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 17 Suggested Applic a tions: 1) Medium duty a sph a lt a nd concrete milling. 2) Desc a ling steel decks. 3) Removing thick m a teri a l build-ups of gre a ses, p a ints, oils, veget a ble powders a nd resins from non- wood type floors. 4) Dr[...]

ASSEMBLY INSTRUCTIONS/OPERATIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 18 Suggested Applic a tions: 1) Removing synthetic co a tings, thermopl a stic a nd cold pl a stic m a rking a nd lines from concrete a nd a sph a ltic surf a ces. COST 10 PRODUCTIVITY 7 SERVICE LIFE 7. Milling fl a ils a re designed to remov[...]

ASSEMBLY INSTRUCTIONS/OPERATIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 19 FIGURE 8 Problems encountered by uneven component wear 1) In a dequ a te free pl a y exists between the fl a ils/sp a cer w a shers a nd the support pl a tes of the fl a il drum. If the fl a ils a nd sp a cer w a shers do not h a ve comple[...]

ASSEMBLY INSTRUCTIONS/OPERATIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 20 TREATMENT PROCESS AND COMPROMISE THE STRUCTURAL INTEGRITY, RESULTING IN PROPERTY DAMAGE AND/OR PERSONAL INJURY. On occ a sion, it m a y be necess a ry to remove severely worn drum rods from the fl a il drum by the use of a b a nd s a w or [...]

ASSEMBLY INSTRUCTIONS/OPERATIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 21 FIGURE 13 The most widely used drum is of the two-section design . FIGURE 14. It incorpor a tes two h a lf sectioned side pl a tes th a t a re positioned on the center sh a ft to f a cilit a te optimum fl a il sp a cing. The h a lf side pl[...]

ASSEMBLY INSTRUCTIONS/OPERATIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 22 2) Inst a ll a sp a cer w a sher next to the outside side pl a te of the wide section. Next, inst a ll a fl a il. Follow with a sp a cer w a sher a nd continue the sequence until the section is full. FIGURE 16. Normal installation procedur[...]

ASSEMBLY INSTRUCTIONS/OPERATIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 23 General Notes Regarding the Installation of Flails 1) Bec a use of v a ri a nce in m a teri a l thickness a nd m a nuf a cturing toler a nces, the specified number of sp a cer w a shers m a y not a lw a ys fit within the n a rrow a nd wide[...]

ASSEMBLY INSTRUCTIONS/OPERATIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 24 oper a tor h a ndle counterclockwise to r a ise the Floor Pl a ner to its m a ximum height position a bove the work surf a ce. 3) Using the wrench, remove the four (4) 1/2-inch di a meter x 1 inch long c a pscrews a nd fl a t w a shers sec[...]

ASSEMBLY INSTRUCTIONS/OPERATIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 25 a mech a nic a l device incorpor a ting a ch a in a nd suit a ble a tt a chment device. The loc a tion of the lifting b a il m a y not a lw a ys loc a te the ex a ct position of the center of gr a vity for the Floor Pl a ner. A lifting h a[...]

ASSEMBLY INSTRUCTIONS/OPERATIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 26 To minimize the volt a ge drop to the motor, a ll extension cords should be copper str a nded, 8 AWG or l a rger. A NEMA 6-20R twist lock type recept a cle is provided with the 8FP/E Series Floor Pl a ner a s a st a nd a rd a ccessory. The[...]

ASSEMBLY INSTRUCTIONS/OPERATIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 27 DANGER AS SOON AS THE ELECTRIC MOTOR HAS STARTED, THE OPERATOR MUST BE IN A POSITION TO ASSUME DIRECT AND FULL CONTROL OF THE FLOOR PLANER. FAILURE TO ASSUME DIRECT AND FULL CONTROL CAN RESULT IN PROPERTY DAMAGE AND/OR PERSONAL INJURY. 10)[...]

ASSEMBLY INSTRUCTIONS/OPERATIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 28 DANGER DO NOT OPERATE A GASOLINE ENGINE IN CLOSED SPACES WITHOUT PROPER VENTILATION. GASOLINE ENGINES PRODUCE CARBON MONOXIDE FUMES. BREATHING CARBON MONOXIDE FUMES CAN RESULT IN PROPERTY DAMAGE AND/OR PERSONAL INJURY. EXCESSIVE LEVELS OF [...]

ASSEMBLY INSTRUCTIONS/OPERATIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 29 a different process a nd c a n not be a chieved with the Floor Pl a ner. 4) The The Floor Pl a ner fe a tures a "down feed" type design for the fl a il drum. The fl a il drum rot a tes forw a rd a nd tow a rds the front of the m [...]

ASSEMBLY INSTRUCTIONS/OPERATIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 30 Dust a nd other p a rticle cont a min a tion c a n be controlled by the following methods: a ) The Floor Pl a ner is equipped with a 1-1/2 or 3 inch outside di a meter v a cuum tube a d a ptor. The 1-1/2 inch di a meter a d a ptor is loc a[...]

ASSEMBLY INSTRUCTIONS/OPERATIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 31 EXERCISE EXTREME CAUTION WHEN UTILIZING ANY SOLVENT TO REMOVE ACCUMULATED MATERIALS FROM THE SURFACES OF THE MACHINE AND RELATED COMPONENTS. MANY SOLVENTS ARE FLAMMABLE. DO NOT SMOKE OR INTRODUCE FLAME IN THE WORK AREA. PROVIDE ADEQUATE VE[...]

ASSEMBLY INSTRUCTIONS/OPERATIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 32 OR EXTENSION CORD BEFORE PERFORMING ANY MAINTENANCE TO THE FLOOR PLANER. RECONNECT THE SPARK PLUG BEFORE RESTARTING THE ENGINE. IF ELECTRIC MOTOR EQUIPPED, TURN THE ON/OFF SWITCH TO THE OFF POSITION BEFORE RECONNECTING THE EXTENSION CORD. [...]

ASSEMBLY INSTRUCTIONS/OPERATIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 33 FIGURE 33 INSTALLING A REPLACEMENT V-BELT OR PULLEY Application: As Specified. Tools Required: 1 e a ch, 7/16 inch wrench. 2 e a ch, 1/2 inch wrenches. 1 e a ch, 9/16 inch wrench. 1 e a ch, 16 inch minimum length str a ightedge. 1 e a ch, [...]

ASSEMBLY INSTRUCTIONS/OPERATIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 34 FIGURE 35 d) T a p the pulley/bushing a ssembly a g a inst the sh a ft shoulder with the soft h a mmer. e) Tighten the 1/4 inch di a meter c a pscrews progressively with a torque wrench to 95 inch pounds. Note: this inst a ll a tion proced[...]

ASSEMBLY INSTRUCTIONS/OPERATIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 35 FIGURE 38. 11) If the Floor Pl a ner is powered by a n engine, reconnect the engine sp a rk plug wire. If powered by a n electric motor a nd the m a chine is to be used immedi a tely, reconnect the extension cord or Floor Pl a ner to the p[...]

ASSEMBLY INSTRUCTIONS/OPERATIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 36 8) Cle a n a nd inspect the drivesh a ft a nd housing for we a r a nd d a m a ge. If a ny d a m a ge is evident, repl a ce the a pplic a ble component. 9) Cle a n the outside bore di a meter of the repl a cement be a ring. Apply a suit a b[...]

ASSEMBLY INSTRUCTIONS/OPERATIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 37 FIGURE 44 10) Mount the be a ring block/drivesh a ft a ssembly to the m a in fr a me. Tighten the 3/8 inch self-locking hex nuts with the torque wrench to 35 ft lbs (47 Nm.) 11) Follow the instructions a s outlined for INSTALLING A REPLAC [...]

ASSEMBLY INSTRUCTIONS/OPERATIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 38 FIGURE 46 7) Cle a n a nd inspect the intern a l hex a gon bushing for d a m a ge a nd excessive we a r. Repl a ce the bushing if required. 8) Position the be a ring block on the a rbor press with the be a ring f a cing down. Determine th [...]

ASSEMBLY INSTRUCTIONS/OPERATIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 39 FIGURE 49 13) Mount the be a ring block to the a ccess pl a te. Tighten the 3/8 inch self locking hex a gon nuts with the torque wrench to 35 ft lbs (47Nm.). 14) Inst a ll the a ccess pl a te to the m a in fr a me by a ligning the dowel pi[...]

ASSEMBLY INSTRUCTIONS/OPERATIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 40 ALIGNING THE CASTER WHEELS. Application: All Models. Tools Required: 1 e a ch, 16 inch minimum length str a ightedge 2 e a ch, 3/4 inch wrenches 1 e a ch, torque wrench, 85 ft lbs (115 Nm.) c a p a city with 3/4 inch socket. 1 e a ch, 6 in[...]

ASSEMBLY INSTRUCTIONS/OPERATIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 41 FIGURE 53 7) Repe a t Step 5 to determine th a t a lignment did not ch a nge while tightening the f a steners. If a lignment did ch a nge, repe a t Steps 2 thru 6 until s a tisf a ctory results h a ve been a chieved. CHECKING DRIVESHAFT RU[...]

8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 42 NOTE PAGE[...]

MAINTENANCE/SERVICE 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 43 ELECTRIC MOTOR SERVICE. Application: 8FP/E Series Floor Planer. The electric motor is c a p a ble of oper a ting for m a ny ye a rs with a re a son a bly sm a ll a mount of m a inten a nce. Before a ttempting to service the motor, disconnect the Floor [...]

TROUBLESHOOTING 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 44 Troubleshooting ELECTRIC MOTOR. Application: 8FP/E Series Floor Planer. MOTOR FAILS TO START ON/OFF switch in the OFF position. Turn the switch to the ON position. Improper volt a ge selection. Determine the a v a il a ble volt a ge v a lue from the power [...]

TROUBLESHOOTING 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 45 EXCESSIVE JUMPING ON THE WORK SURFACE Excessive cutting depth for the feed/tr a vel r a te. R a ise the fl a il drum a nd m a ke multiple, sh a llow p a sses inste a d. Reduce the feed/tr a vel r a te. See OPERATING THE FLOOR PLANER ON THE JOB SITE. Engine[...]

STORAGE 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 46 Storage Application: All Models. Proper procedure for long term stor a ge of the Floor Pl a ner will protect it a g a inst the effect s of corrosion a nd d a m a ge. If the Floor Pl a ner is not to be oper a ted for a period of 30 d a ys or more, proceed to store [...]

SPECIFICATIONS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 47 Specifications FRAME STRUCTURE................................................................................. Uniti zed, Welded Steel Pl a te DRIVE REDUCTION SYST EM ..................................................... 3VX 335 Belt/Pulley DRIVESHAFT SIZE[...]

EXPLANATION OF CODE IN REMARKS COLUMN 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 48 The f ollowing s ection e xpl a in s the different s ym b ol s a nd rem a rk s us ed in the P a rt s s ection of thi s m a n ua l. U s e the help n u m b er s fo u nd on the ba ck p a ge of the m a n ua l if there a re a ny qu e s tio[...]

ASSEMBLY INSTRUCTIONS/OPERATIONS SUGGESTED SPARE PARTS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 49 8FP FLOOR PLANER SERIES 1 TO 3 UNIT Gasoline Model Honda GX160KQXC9 Qty. P/N Description 1 ............. SP8-0600 ............... HOSE, GREASE 1 ............. CS80350 ................ SWITCH ASSY., ON/OFF 1 ..........[...]

ASSEMBLY INSTRUCTIONS/OPERATIONS MAIN FRAME ASSEMBLY 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 50 MAIN FRAME ASSY.[...]

ASSEMBLY INSTRUCTIONS/OPERATIONS MAIN FRAME ASSEMBLY 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 51 MAIN FRAME ASSY. NO. PART NO. PART NAME QTY. REMARKS 1 29020-001 FRAME, MAIN 1 2 29020-002 TUBE, VACUUM 1 3 SP8-0061 AXLE MOUNT 1 4 06503-010 SCREW, CAP ½-1-1/4 ” UNC PLATED GRADE 5 2 5 06503-012 SCREW, CAP ½-1-1/2 [...]

ASSEMBLY INSTRUCTIONS/OPERATIONS DRIVESHAFT ASSEMBLY 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 52 DRIVESHAFT ASSY.[...]

ASSEMBLY INSTRUCTIONS/OPERATIONS DRIVESHAFT ASSEMBLY 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 53 DRIVESHAFT ASSY NO. PART NO. PART NAME QTY. REMARKS 1 29020-011 RING, RETAINING EXTERNAL 2 2 29020-012 SHEAVE, DRIVESHAFT 1 3 29020-013 KEY, SPECIAL 1 4 29020-014 SHEAVE, CENTER HUB 1 5 06500-008 SCREW, CAP 5/16-18 NC X[...]

ASSEMBLY INSTRUCTIONS/OPERATIONS REAR FRAME ASSEMBLY 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 54 REAR FRAME ASSY `[...]

ASSEMBLY INSTRUCTIONS/OPERATIONS REAR FRAME ASSEMBLY 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 55 REAR FRAME ASSY NO. PART NO. PART NAME QTY. REMARKS 1 SP8-0091A REAR FRAME MOUNT ASSEMBLY ..............................1........... INCL UDES ITEMS W /# 2 SP8-0111A REAR AXLE MOUNT ASSEMBLY ............................[...]

ASSEMBLY INSTRUCTIONS/OPERATIONS OPERATOR HANDLE ASSEMBLY ( GASOLINE ) 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 56 OPERATOR HANDLE ASSY (GASOLINE)[...]

ASSEMBLY INSTRUCTIONS/OPERATIONS OPERATOR HANDLE ASSEMBLY ( GASOLINE ) 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 57 OPERATOR HANDLE ASSY (GASOLINE) NO. PART NO. PART NAME QTY. REMARKS 1 29020-028 HANDLE, OPERATOR 1 2 29020-029 SCREW, CRANK 1 3 29020-031 KNOB, HANDLE 1 4 29020-031 SCREW, CAP SPECIAL 1 5 06500-008 SCR[...]

ASSEMBLY INSTRUCTIONS/OPERATIONS GASOLINE ENGINE ASSEMBLY 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 58 GASOLINE ENGINE ASSY[...]

ASSEMBLY INSTRUCTIONS/OPERATIONS GASOLINE ENGINE ASSEMBLY 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 59 GASOLINE ENGINE ASSY. NO. PART NO. PART NAME QTY. REMARKS 1 29020-001 FRAME, MAIN 1 2 GX160KQXC9 ENGINE, HONDA 5.5HP 1 3 29020-037 DRIVE PULLEY 1 4 29020-038 BUSHING, CENTER HUB 1 5 06499-006 SCREW, CAP ¼ ” UNC [...]

ASSEMBLY INSTRUCTIONS/OPERATIONS OPERATOR HANDLE ASSEMBLY ( ELECTRIC ) 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 60 OPERATOR HANDLE ASSY[...]

ASSEMBLY INSTRUCTIONS/OPERATIONS OPERATOR HANDLE ASSEMBLY ( ELECTRIC ) 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 61 OPERATOR HANDLE ASSY (ELECTRIC) NO. PART NO. PART NAME QTY. REMARKS 1 29020-028 HANDLE OPERATOR 1 2 29020-029 SCREW, CRANK 1 3 29020-031 KNOB, HANDLE 1 4 29020-031 HEIGHT ADJUSTMENT SCREW 1 5 06500-008[...]

ASSEMBLY INSTRUCTIONS/OPERATIONS ELECTRIC MOTOR ASSEMBLY 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 62 ELECTRIC MOTOR ASSY[...]

ASSEMBLY INSTRUCTIONS/OPERATIONS ELECTRIC MOTOR ASSEMBLY 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 63 ELECTRIC MOTOR ASSY NO. PART NO. PART NAME QTY. REMARKS 1 29020-001 FRAME, MAIN 1 2 SP8E5HP-0060 MOTOR, ELECTRIC 5HP 1 3 SP8E5HP-0050 MOTOR PLATE 1 4 29018-029 RELIEF, STRAIN 1 5 29018-030 NUT, BULKLHEAD 1 6 29020-0[...]

ASSEMBLY INSTRUCTIONS/OPERATIONS ONE SECTION DRUM ASSEMBLY 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 64 ONE SECTION DRUM ASSY.[...]

ASSEMBLY INSTRUCTIONS/OPERATIONS ONE SECTION DRUM ASSEMBLY 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 65 ONE SECTION DRUM ASSY. NO. PART NO. PART NAME QTY. REMARKS 1# 29020-040 SHCSS, ¼ ” -20 X 1 8 2# 29020-041 FLAIL DRUM END CAP 2 3# 29020-042 FLAIL DRUM ROD 4 4# 07029-004 WASHER, LOCK 1/4 8 5# 08233-004 LOCKNUT [...]

ASSEMBLY INSTRUCTIONS/OPERATIONS TWO SECTION DRUM ASSEMBLY 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 66 TWO SECTION DRUM ASSY[...]

ASSEMBLY INSTRUCTIONS/OPERATIONS TWO SECTION DRUM ASSEMBLY 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 67 TWO SECTION DRUM ASSY. NO. PART NO. PART NAME QTY. REMARKS 1# 29020-040 SHCSS, ¼ ” -20 X 1 8 2# 29020-041 FLAIL DRUM END CAP 2 3# 29020-042 FLAIL DRUM ROD 4 4# 07029-004 WASHER, LOCK 1/4 8 5# 08233-004 LOCKNUT [...]

ASSEMBLY INSTRUCTIONS/OPERATIONS FLAILS , SPACERS AND WASHERS ASSEMBLY 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 68 FLAILS & SPACER WASHERS ASSY.[...]

ASSEMBLY INSTRUCTIONS/OPERATIONS FLAILS , SPACERS AND WASHERS ASSEMBLY 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 69 FLAILS, SPACERS AND WASHERS ASSY. NO. PART NO. PART NAME QTY. REMARKS 1 29019-010 STAR FLAIL 2 29021-005 SPACER WASHER 3 29019-011 BEAM FLAIL 4 29021-004 MILLING FLAIL 5 29019-012 PENTAGONAL FLAIL[...]

DECALS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 70[...]

DECALS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 71 DECALS. NO. PART NO. PART NAME QTY. REMARKS 1 29020-045 DECAL: WARNING (EYE AND EAR) 1 2 29020-046 DECAL: WARNING (FLAILS) 1 3 29020-047 DECAL: DEPTH CONTROL 1 4 512910 DECAL: MQ LOGO 1 5 29020-048 DECAL:WARNING GUARDS 1 6 29020-049 DECAL: WARNING KEEP CLEAR 1[...]

Effective : July 15, 2003 TERMS AND CONDITION OF SALE— PARTS Effective: February 22, 2006 TERMS AND CONDITION OF SALE — PARTS 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 72 PAY M E N T T E R M S Te r m s of p a yment for p a rt s a re net 3 0 d a y s . FREIGHT POLI CY All p a rt s order s will b e s hipped co llec[...]

NOTE PAGE 8FP FLOOR PLANER SERIES OPERATION AND P ARTS MANUAL REV #2 (05/28/09) PAGE 73[...]

OPERATION AND PARTS MANUAL Yo u r Loc a l De a ler i s : HERE’S HOW TO GET HELP PLEA S E HA VE THE MODEL AND S ERIAL NUMBER ON-HAND WHEN CALLING © COPYRIGHT 2009, MUL TIQUIP INC. M u lti qu ip Inc a nd the MQ logo a re regi s tered tr a dem a rk s of M u lti qu ip Inc. a nd m a y not b e us ed, reprod u ced, or a ltered witho u t written per mi [...]