NEC E905 manual

User ’ s Manual E705 E805 E905[...]

Index Declaration of conf ormity .............................................................................................................................. English-1 Impor tant Inf or mation ................................................................................................................................... English-2 W ARNING ....[...]

English-1 English Declaration of conformity FCC Information 1. Use the attached specified cables with this displa y so as not to interfere with radio and tele vision reception. (1) Please use the supplied power cord or equiv alent to ensure FCC compliance. (2) Please use a good quality shielded video signal cable . Use of oth er cab les and adapte[...]

English-2 Important Information T O PREVENT FIRE OR SHOCK HAZARDS, DO NO T EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO , DO NO T USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPT A CLE OR O THER OUTLETS UNLESS THE PRONGS CAN BE FULL Y INSERTED . REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH V OL T AGE COMPONENTS INSIDE. REFER SER V[...]

English-3 English FOR OPTIMUM PERFORMANCE, PLEASE NO TE THE FOLLO WING WHEN SETTING UP AND USING THE MUL TI-FUNCTION MONIT OR: • DO NOT OPEN THE MONITOR . There are no user ser viceab le par ts inside and opening or removing cov ers may e xpose you to dangerous shock hazards or other risks. Refer all ser vicing to qualified service personnel. ?[...]

English-4 Contents Y our new monitor bo x* should contain the following: • LCD monitor • P ower cord* 1 • Video Signal Cable • Wireless Remote Control and AAA Batteries • Setup Manual • Clamp x 1 • Screw with w asher (M4 x 10) x 1 • CD-ROM P ower Cord* 1 Setup Manual Clamp x 1 CD-ROM Screw with w asher (M4 x 10) x 1 Setup Manual Vid[...]

English-5 English This device cannot be used or installed without the T abletop Stand or other mounting accessory for support. For proper installation it is strongly recommended to use a trained, NEC authorized service person. Failure to follow NEC standard mounting procedures could result in damage to the equipment or injury to the user or install[...]

English-6 Attaching Mounting Accessories The monitor is designed f or use with the VESA mounting system. 1. Attach eyebolts (not included) for mounting This model is equipped with attachable e yebolts to aid in mounting. • Screw the e yebolts into e yebolt holes as sho wn in the picture. • Be sure ey ebolts are secure. • In order to mov e the[...]

English-7 English 5. V entilation Requirements When mounting in an enclosed space or recessed area, leav e adequate room between the monitor and the enclosure to allow heat to disperse , as shown below . Allow adequate v entilation or provide air conditioning around the monitor , so that heat can proper ly dissipate aw a y from the unit and mountin[...]

English-8 Parts Name and Functions Control Panel A POWER button ( ) Switches the power on/off . See also page 16. B MUTE button (MUTE) Switches the audio mute ON/OFF . C INPUT button (INPUT) Acts as SET/POINT ZOOM button within OSD men u. (T oggle switches between [D VI], [DPORT], [HDMI], [V GA] or [Y/Pb/Pr], [HDMI2]). These are av ailable input on[...]

English-9 English T erminal Panel A AC IN connector Connects with the supplied power cord. B Main Power Switch On/Off s witch to tur n main pow er ON/OFF . C EXTERNAL SPEAKER TERMINAL T o output the audio signal from A UDIO 1, DPORT and HDMI. Red terminal is plus (+). Black terminal is minus (-). NOTE: This speaker terminal is for 15 W + 15 W (8 oh[...]

English-10 Wireless Remote Control A POWER button Switches the power on/standb y . B INPUT button Selects input signal. D VI: D VI HDMI: HDMI, HDMI2 Displa yP or t: DPORT V GA: V GA Y/Pb/Pr : Y/Pb/Pr OPTION: Depends on your connection C PICTURE MODE button Selects picture mode, [HIGHBRIGHT], [ST AND ARD], [sRGB], [CINEMA], [CUST OM1], [CUST OM2]. S[...]

English-1 1 English Operating Range for the Remote Control P oint the top of the remote control toward the LCD monitor’ s remote sensor during button operation. Use the remote control within a distance of about 7 m (23 ft.) from remote control sensor or at a horizontal and vertical angle of within 30° within a distance of about 3.5 m (10 ft.). P[...]

English-12 1. Determine the installation location CAUTION: Installing your LCD monitor must be done b y a qualified technician. Contact your dealer f or more inf or mation. CAUTION: MO VING OR INST ALLING THE LCD MONIT OR MUST BE DONE BY FOUR OR MORE PEOPLE. F ailure to follow this caution ma y result in injur y if the LCD monitor f alls. CAUTION:[...]

English-13 English 5. Switch on the power of all the attached external equipment When connected with a computer , switch on the pow er of the computer first. 6. Operate the attached external equipment Displa y the signal from the desired input source. 7. Adjust the sound Make v olume adjustments when required. 8. Adjust the screen (See pages 20 an[...]

English-14 Connections NOTE: Do not connect/disconnect cables when turning on the monitor or other external equipment as this ma y result in a loss of the monitor image. NOTE: Use an audio cable without a b uilt-in resistor . Using an audio cable with a b uilt-in resistor turns down the sound. Before making connections: * First turn off the power o[...]

English-15 English Connecting a Personal Computer Connecting your computer to y our LCD monitor will enable y ou to displa y your computer’ s screen image. Some video cards ma y not display an image correctly . Y our LCD monitor displa ys proper image by adjusting the f actor y preset timing signal automatically . <T ypical factory preset sign[...]

English-16 Basic Operation Power ON and OFF Modes The LCD monitor power indicator will turn green while pow ered on and will tur n red or amber while pow ered off. NOTE: The Main P ower Switch must be in the ON position in order to po wer up the monitor using the remote control or the P ower Button. Main P ower Switch ON OFF P ower Button Using the[...]

English-17 English Picture Aspect D VI, V GA, DPORT FULL 1:1 ZOOM NORMAL HDMI, Y/Pb/Pr , HDMI2 FULL WIDE D YNAMIC 1:1 ZOOM NORMAL Aspect ratio of image Unchanged view* 3 Recommended selection for picture aspect* 3 4:3 NORMAL D YNAMIC Squeeze FULL Letterbox WIDE * 3 Grey areas indicate unused portions of the screen. NORMAL: Displa ys the aspect rati[...]

English-18 Information OSD The Inf or mation OSD provides inf or mation such as: Input Source, Picture Siz e, etc. Press the DISPLA Y button on the remote to bring up the Information OSD . A Input Name B Audio input mode C Picture aspect D Input Signal Information 5 Sub picture information Picture Mode D VI, VGA, DPOR T ST ANDARD sRGB CUSTOM1 CUSTO[...]

English-19 English OSD (On-Screen-Display) Controls NOTE: Some functions ma y not be av ailable depending on the model or optional equipment. PICTURE MODE Got o A dju stm ent S ele c t Ret urn Cl os e 70 50 50 50 50 50 T H A N K YO U FO R S A VI N G T H E E N V I R ON M E N T . C A R B O N F O OT P R I N T 86 . 0 % Input source Main Menu Icons Main[...]

English-20 Setting Default PICTURE BACKLIGHT Adjusts the ov erall image and backg round brightness. Press + or - to adjust. NO TE: When MODE1 or MODE2 is selected in ROOM LIGHT SENSING, this function cannot be changed. 70 CONTRAST Adjusts the image brightness in relationship to the input signal. Press + or - to adjust. NO TE: When sRGB is selected [...]

English-21 English PHASE VGA, Y/Pb/Pr inputs only Adjusts the visual “noise” on the image. - H RESOLUTION VGA inputs only Adjusts the horizontal size of the image. - V RESOLUTION VGA inputs only Adjusts the vertical size of the image. - INPUT RESOLUTION VGA inputs only If there is a problem with signal detection, this function f orces the monit[...]

English-22 BASS T o accentuate or reduce the low frequency sound. Press + button to increase BASS sound. Press - button to decrease BASS sound. 0 SURROUND Ar tificial surround sound. NO TE: Audio out is disab led when this function is set to ON. OFF PIP A UDIO Selects source of PIP audio . MAIN A UDIO LINE OUT Selecting “V ARIABLE” enab les co[...]

English-23 English BLEND Sets the transparency of the T ext Ticker (0: transparent, 100: opaque). DETECT Enables auto-detection of the T ext Tick er . F ADE IN Enables f ade-in of the text tick er . RESET Resets PIP options back to f actor y settings except SUB INPUT and ASPECT . - OSD LANGU AGE Select the language used by the OSD . ENGLISH (Depend[...]

English-24 A UTO ID (not adjustable) - A UTO ID RESET (not adjustable) - IR LOCK SETTINGS Prev ents the monitor from being controlled by the wireless remote control. When ACTIV A TE is selected, all the settings are activated. NO TE: IR LOCK SETTINGS is a function intended only to the wireless remote control buttons . This function does not lock ou[...]

English-25 English DISPLA Y PROTECTION POWER SA VE Sets ho w long the monitor waits to go into pow er sav e mode after the signal is lost. NO TE: When connecting D VI, the video card might not stop sending the digital data ev en though the image might hav e disappeared. If this occurs the monitor will not switch into pow er management mode. A UTO S[...]

English-26 SUBNET MASK: Set your subnet mask number of the netw ork connected to the monitor when “MANU AL ” is selected for [IP SETTING]. 255.255.255.0 DEF A UL T GA TEW A Y : Set your def ault gatewa y of the network connected to the monitor when “MANU AL ” is selected for [IP SETTING]. NO TE: Set as [0.0.0.0] to delete the setting. 0.0.0[...]

English-27 English TERMINAL SETTING D VI MODE Selects the kind of D VI-D equipment which is connected to the D VI input. Select “D VI-HD” when D VD play er or computer equipment, which requires HDCP authentication, is connected. Select “D VI-PC” when a computer equipment, which not requires HDCP authentication, is connected. D VI-HD D-SUB M[...]

English-28 120Hz (not adjustable) - T OUCH P ANEL (not adjustable) - RESET Resets the f ollowing settings within the AD V ANCED OPTION menu back to f actor y setting: INPUT DETECT (except the priority of input signals), INPUT CHANGE (except f or INPUT1 and INPUT2), TERMINAL SETTING, DEINTERLACE, COLOR SYSTEM, O VER SCAN, A UDIO in OPTION SETTING. -[...]

English-29 English NOTE 1: CREA TING A SCHEDULE The schedule function allows the displa y to be set to power on and off at diff erent times. Up to sev en different schedules can be prog rammed. T o program the schedule: 1. Enter the SCHEDULE menu. Highlight SCHEDULE SETTINGS using the up and down buttons . Press the SET/POINT ZOOM or the + button t[...]

English-30 REMOTE CONTROL ID FUNCTION REMOTE CONTROL ID The remote control can be used to control up to 100 individual monitors using what is called the REMO TE CONTROL ID mode. The REMOTE CONTR OL ID mode works in conjunction with the Monitor ID , allowing control of up to 100 individual monitors. For e xample: if there are many monitors being use[...]

English-31 English This LCD monitor can be controlled by connecting a personal computer with a RS-232C terminal. Functions that can be controlled by a personal computer are: • P ower ON or OFF . • Switching between input signals. • Sound Mute ON or OFF . Connection LCD Monitor + PC RS-232C Cable PC RS-232C LCD Monitor NOTE: If your PC is equi[...]

English-32 2) Control command diagr am F or other commands, please see “Exter nal_Control.pdf ” file on the CD-R OM. Function (Monitor ID = 1) Code Data P ower ON 01 30 41 30 41 30 43 02 43 32 30 33 44 36 30 30 30 31 03 73 0d P ower OFF 01 30 41 30 41 30 43 02 43 32 30 33 44 36 30 30 30 34 03 76 0d Input Source Select Displa yP or t 01 30 41 3[...]

English-33 English Connecting to a Network Using a LAN cable allo ws you to specify the Network Settings and the Aler t Mail Settings by using an HTTP server function. T o use a LAN connection, you are required to assign an IP address. Example of LAN connection: Server Hub NO TE: Use a categor y 5 or higher LAN cable . LAN cable (not supplied) Netw[...]

English-34 Preparation Before Use Connect the monitor to a commercially av ailable LAN cable bef ore engaging in browser operations . Operation with a browser that uses a pro xy ser ver ma y not be possible depending on the type of proxy server and the setting method. Although the type of proxy server will be a f actor , it is possible that items t[...]

English-35 English Network Setting Click “NETWORK” on the left side of HOME. IP SETTING Set f or IP ADDRESS SETTING. A UTO: Automatically assign an IP address . MANU AL: Set your IP address of the network connected to the monitor . NO TE: Consult your netw or k administrator f or the IP address when [A UTO] is selected f or [IP SETTING]. IP ADD[...]

English-36 Mail Setting Click “MAIL ” on the left side of HOME. This option notifies your computer of an error message via e-mail when using wired LAN. An error message notification will be sent when an error occurs in the monitor . ALER T MAIL Checking [ENABLE] will turn on the Aler t Mail feature. Checking [DISABLE] will turn off the Aler t[...]

English-37 English Alert error message list Error number * ErrorCode Alert mail Message Explanation Measure 70h ~ 7Fh The monitor’ s power supply is not functioning normally . Standby po wer Abnormal Please contact y our supplier. 80h ~ Fh The cooling fan has stopped. Cooling fan Abnormal Please contact your supplier . 90h ~ 9Fh The monitor’ s [...]

English-38 SNMP Setting Click “SNMP” on the left side of HOME. This function allows f or getting status and controlling of a monitor via the networ k. V ersion: SNMP v1 A uthenticated plaintext b y community name, not return a confir mation message of T rap . SNMP v2c A uthenticated plaintext b y community name, return a confir mation message[...]

English-39 English AMX Setting Click “AMX” on the left side of HOME. AMX BEA CON T ur n on or off f or detection from AMX Device Disco very when connecting to the network suppor ted by AMX’ s NetLinx control system. TIP: When using a device that supports AMX Device Discovery , all AMX NetLinx control system will recognize the device and downl[...]

English-40 Name Setting Click “NAME” on the left side of HOME. MONIT OR NAME Set a monitor name. The name must be 16 characters or less. The default is model name. HOST NAME T ype in the hostname of the network connected to the monitor . Up to 15 alphanumeric characters can be used. DOMAIN NAME T ype in the domain name of the network connected [...]

English-41 English Memo Setting Click “MEMO” on the left side of HOME. Set a title and meesage. TITLE A title must be 24 characters or less . MESSA GE A message must be 240 characters or less. MEMO P ASSWORD The def ault is “0000”. MEMO P ASSWORD ENABLE MEMO P ASSWORD is required when setting MEMO .[...]

English-42 Using “SET/POINT ZOOM” b utton on a remote control allows to enlarge a par tial of image. Press CH+/- button to z oom up or down. The image can be e xpanded from 1 to 10 times. 1 Press [SET/POINT ZOOM] button on a remote control. An icon will be a magnifier . 2 Move magnifier icon b y [ ] [ ] [+] [-] button. 3 Press [CH+] to zoom u[...]

English-43 English Reduced Footprint: Provides the ideal solution f or environments with superior image quality . Color Control Systems: Allow y ou to adjust the colors on your screen and customize the color accur acy of your monitor to a variety of standards. OmniColor: Combines Six-axis color control and the sRGB standard. Six-axis color control [...]

English-44 No picture • The signal cable should be completely connected to the displa y card/computer . • The displa y card should be completely seated in its slot. • Check the main P ower Switch, it should be in the ON position. • P ower Switch and computer power s witch should be in the ON position. • Check to mak e sure that a suppor t[...]

English-45 English Specifications - E705 Product Specifications LCD Module Resolution: Color: 70”/1765.6 mm diagonal 1920 x 1080 Over 16 million colors (depending on video card used) F requency Horizontal: V er tical: 15.625/15.734 kHz, 31.5 kHz - 91.1 kHz (Analog Input) 31.5 kHz - 91.1 kHz (Digital Input) 50.0 - 85.0 Hz Pixel Cloc k 25.2 MHz -[...]

English-46 Specifications - E805 Product Specifications LCD Module Resolution: Color: 80”/2032.2 mm diagonal 1920 x 1080 Over 1073 million colors (depending on video card used) F requency Horizontal: V er tical: 15.625/15.734 kHz, 31.5 kHz - 91.1 kHz (Analog Input) 31.5 kHz - 91.1 kHz (Digital Input) 50.0 - 85.0 Hz Pixel Cloc k 25.2 MHz - 162.0[...]

English-47 English Specifications - E905 Product Specifications LCD Module Resolution: Color: 90”/2286.6 mm diagonal 1920 x 1080 Over 1073 million colors (depending on video card used) F requency Horizontal: V er tical: 15.625/15.734/26.973 kHz, 31.5 kHz - 91.1 kHz (Analog Input) 15.625/15.734/26.973 kHz, 31.5 kHz - 91.1 kHz (Digital Input) 24.[...]

English-48 1) Analog multi input (MiniDsub15p): VGA, Y/Pb/Pr Pin No Name 1 Red, Y/Pb/Pr_Pr 2 Green, Y/Pb/Pr_Y 3 Blue, Y/Pb/Pr_Pb 4 GND 5 DDC-GND 6 Red-GND 7 Green-GND 8 Blue-GND 9 +5V (DDC) 10 GND 11 NC 12 DDC-SD A 13 H-SYNC 14 V -SYNC 15 DDC-SCL 5 10 15 1 6 11 Mini D-SUB 15P (Monitor side) 2) RS-232C input 1 6 5 9 D-SUB 9P (Monitor side) Pin No Na[...]

English-49 English NEC DISPLA Y SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’ s top prior ities in trying to minimize the burden placed on the en vironment. W e are engaged in dev eloping environmentally-friendly products, and alw ays strive to help define and comply with the latest indepen[...]

English-50 For EU: The crossed-out wheeled bin implies that used batter ies should not be put to the general household waste! There is a separate collection system f or used batteries, to allow proper treatment and recycling in accordance with legislation. According the EU directive 2006/66/EC, the battery can’t be disposed improperly . The batte[...]