NEC U321Hi-MP manual

Projector U321H User ’ s Manual Model No. NP-U321H[...]

Ver. 1 2/15 • DLP, BrilliantColor, and DLP Link are trademarks of Texas Instruments. • IBM is a trademark or registered trademark of International Business Machines Corporation. • Macintosh, Mac OS X, iMac, and PowerBook are trademarks of Apple Inc., registered in the U.S. and other countries. • Microsoft, Windows, Windows 7, Windows Vista,[...]

i English ... Impor tant Inf or ma tion Safety Cautions Precautions Please read this manual carefully before using your NEC projector and keep the manual handy for future reference. CAUTION To turn off main power, be sure to remove the plug from power outlet. The power outlet socket should be installed as near to the equipment as possible, and shou[...]

ii English ... Impor tant Inf or ma tion RF Interference (for USA only) W ARNING The Federal Communications Commission does not allow any modications or changes to the unit EXCEPT those specied by NEC Display Solutions of America, Inc. in this manual. Failure to comply with this government regulation could void your right to operate this equi[...]

iii English ... Impor tant Inf or ma tion Fire and Shock Precautions • Ensure that there is sufcient ventilation and that vents are unobstructed to prevent the build-up of heat inside your projector. Allow at least 4 inches (10cm) of space between your projector and a wall. • Do not try to touch the exhaust vent as it can become heated while[...]

iv English ... Impor tant Inf or ma tion Remote Control Precautions • Handle the remote control carefully. • If the remote control gets wet, wipe it dry immediately. • Avoid excessive heat and humidity. • Do not short, heat, or take apart batteries. • Do not throw batteries into re. • If you will not be using the remote control for a[...]

v English ... Impor tant Inf or ma tion About High Altitude mode • Set [FAN MODE] to [HIGH ALTITUDE] when using the projector at altitudes approximately 2500 feet/760 meters or higher. • Using the projector at altitudes approximately 2500 feet/760 meters or higher without setting to [HIGH ALTITUDE] can cause the projector to overheat and the pr[...]

1 ... English Table of Contents Table of Contents ..................................1 Usage Notice ..........................................2 Precautions ............................................. 2 Introduction ...........................................4 Product Features .................................... 4 Package Overview ................[...]

2 English ... Usage Notice Precautions Follow all warnings, precautions and maintenance as recommended in this user’s guide to maximize the life of your unit. ■ Warning- This projector will detect the life of the lamp itself. Please be sure to change the lamp when it shows warning messages. ■ Warning- Reset the “CLEAR LAMP HOURS” function[...]

3 ... English Usage Notice Do: ■ Turn off the product before cleaning. ■ Use a soft cloth moistened with mild detergent to clean the display housing. ■ Disconnect the power plug from AC outlet if the product is not being used for a long period of time. ■ If the lens is soiled, use a commercially available cleaning cloth for lens. Do not: ?[...]

4 English ... Introduction Product Features ■ High resolution Full HD (1920 x 1080) support. ■ 0.5 W in standby condition with energy saving technology Selecting [NORMAL] for [STANDBY MODE] from the menu can put the projector in power-saving mode that consumes only 0.5 W (typical value). ■ Two HDMI input ports provide digital signal The two H[...]

5 ... English Introduction Power Cord x1 Remote Control (P/N:7N901052) Projector Package Overview This projector comes with all the items shown below. Check to make sure your unit is completed. Contact your dealer immediately if anything is missing.  Due to the difference in applications for each country, some regions may have different acces[...]

6 English ... Introduction 1. Control Panel 2. Focus Lever 3. Intake vent 4. Remote Control Sensor 5. Exhaust vent Projector Product Overview 6. Speaker 7. AC IN terminal 8. Input / Output Connections 9. Cover Glass 10. Tilt foot 6 7 8 4 2 5 3 1 10 9[...]

7 ... English Introduction Connection Ports 1. SERVICE Port (for service purpose only) 2. MONITOR OUT Connector (Separate sync signal only) 3. PC CONTROL Connector 4. COMPUTER IN Connector 5. VIDEO IN Connector 6. HDMI 2 IN Connector 7. HDMI 1/MHL IN Connector 8. AUDIO IN R Connector 9 . AUDIO IN L Connector 10. AUDIO IN Jack (3.5mm mini jack) 11. [...]

8 English ... Introduction Control Panel 3 6 8 7 2 1 4 5 1 POWER LED Indicate the projector’s status. 2 ENTER Conrm your section of items in sub menu operation. 3 STATUS LED Indicate the projector’s temperature status. 4 LAMP LED Indicate the projector’s lamp status. 5 MENU Press “MENU” to launch the On- screen display (OSD), back to t[...]

9 ... English Introduction Attaching the Cable Cover Procedure for Attaching the Cable Cover: 1. Mount the cable cover to the projector.   2. Tighten two screws on both sides of the cable cover.  Cable Cover 1 2 CAUTION: • Be sure to tighten the screws after attaching the cable cover. Failure to do so may cause the cable cover to come of[...]

10 English ... Introduction Remote Control 1 POWER ON Power on the projector. Refer to the “Power On/Off the Projector” section on pages 22- 23. 2 POWER OFF Power off the projector.Refer to the “Power On/Off the Projector” section on pages 22- 23. 3 4 5 18 10 11 13 19 24 26 28 30 27 12 1 16 2 8 23 21 9 25 14 29 31 17 15 6 7 20 22[...]

11 ... English Introduction 3 COMPUTER 1 Press “1” to choose Computer IN connector. 4 COMPUTER 2 No function. 5 HDMI 1 Press “4” to choose HDMI 1/ MHL IN connector. 6 VIDEO Press “VIDEO” to choose VIDEO IN connector. 7 USB A No function. 8 ID SET No function. 9 AV-MUTE Momentarily turn off/on the audio and video. 10 MENU Press “MENU?[...]

12 English ... Introduction 18 HDMI 2 Press “5” to choose HDMI 2 IN connector. 19 DISPLAY PORT No function. 20 USB B No function. 21 Number Button No function. 22 LAN No function. 23 CLEAR Clear the password while you input the password. 24 FREEZE Freeze To pause the screen image. Press again to resume the screen image. 25 EXIT Exit the setting[...]

13 ... English Introduction Battery Installation Remote Control Precautions • Handle the remote control carefully. • If the remote control gets wet, wipe it dry immediately. • Avoid excessive heat and humidity. • Do not place the battery upside down. • Replace only with the same or equivalent type recommended by the manufacturer. • Disp[...]

14 English ... Introduction Controlling the Projector over a LAN [Using on Windows] Using the utility software “PC Control Utility Pro 4” that you can download from our web site (http://www.nec-display.com/dl/en/index.html), the projector can be controlled from a computer over a LAN. Control Functions Power On/Off, signal selection, picture fre[...]

15 ... English Introduction Step 1: Install PC Control Utility Pro 4 on the computer • Supported OS - PC Control Utility Pro 4 will run on the following operating systems. Windows 8 *1, Windows 8 Pro *1, Windows 8 Enterprise *1, Wind ows 7 Home Basi c, W indow s 7 H ome P remi um, W indo ws 7 Professional, Windows 7 Enterprise, Windows 7 Ultimate[...]

16 English ... Introduction Read “END USER LICENSE AGREEMENT” carefully. 4 If you agree, click “I accept the terms in the license agreement” and then click “Next”. Follow the instructions on the installer screens to complete the installation. TIP:Uninstalling PC Control Utility Pro 4 • To uninstall PC Control Utility Pro 4, do the sam[...]

17 ... English Introduction 5 Click “Open” in the dialog box. If prompted, enter an administrator name and password. The installer will start. 6 Click “Next”. “END USER LICENSE AGREEMENT” screen will be displayed. 7 Read “END USER LICENSE AGREEMENT” and click “Next”. The conrmation window will be displayed. 8 Click “I accep[...]

18 English ... Introduction Viewing 3D Images The projector provides 3D images to a user wearing commercially available LCD shutter eyeglasses. CAUTION Health precautions Before viewing, be sure to read health care precautions that may be found in the user’s manual included with your LCD shutter eyeglasses or your 3D compatible content such as DV[...]

19 ... English Installation Connecting the Projector  Make sure that the power plug is fully inserted into both the projector AC IN terminal and the wall outlet.  The MONITOR OUT connector supports Separate sync signal only. T o the wall outlet 1............................................................................................[...]

20 English ... Installation  Due to the difference in applications for each country, some regions may have different accessories.  When Deep Color is set to ON on your HDMI equipment, video or audio noise may be generated depending on the equipment or cable being used. Should this happen, set Deep Color to OFF (8 bit). Connect to Video [...]

21 ... English Installation Powering On/Off the Projector  Turn on the projector rst and then the signal sources.  If you turn on the projector immediately after the lamp is turned off or when the temperature is high, the fans run without displaying an image for a while and then the projector will display the image.  (*)When “Normal?[...]

22 English ... Installation Powering Off the Projector 1. Press the “ POWER OFF ” button on the remote control or the button on the control panel to turn off the projector lamp, you will see a message as below on the on-screen display. POWER OFF YES NO ARE YOU SURE? 2. Press the “POWER OFF” button again to conrm. 3. Disconnect the power [...]

23 ... English Installation Warning Indicator  When the “STATUS” LED i ndicator ashes red, it indicates the projector has overheated. The projector will auto matically shut itself down. WARNING! TEMPERATURE TOO HIGH 1. MAKE SURE AIR IN AND OUTLETS ARE NOT BLOCKED. 2. MAKE SURE THE ENVIRONMENT TEMPERATURE IS UNDER 40 DEGREE C  When the [...]

24 English ... Installation Adjusting the Projected Image Adjusting the Height of Projector Image The projector is equipped with the tilt foot for adjusting the image height. 1. Locate the tilt foot you wish to modify on the underside of the projector. 2. Rotate the tilt foot clockwise to raise the projector or counter clockwise to lower it. Repeat[...]

25 ... English Installation Adjusting the Projector’s Focus To focus the image, slide the focus lever until the image is clear. Focus lever[...]

26 English ... Installation Adjusting Projection Image Size (Diagonal) Projection Image Size from 85” to 100” (2.16 to 2.54 meters). Screen Size H1 H2 L1 L2 Diagonal Width Height wide wide inch mm inch mm inch mm inch mm inch mm inch mm inch mm 85.0 2159 74 1882 42 1058 6 154 48 1212 9 222 19 474 90.0 2286 78 1992 44 1121 7 165 51 1286 10 250 2[...]

27 ... English User Controls SCREEN IMAGE SETTING OPTIONS GENERAL ADVANCED PICTURE MODE WALL COLOR BRIGHTNESS CONTRAST SHARPNESS SATURATION HUE PRESENTATION OFF COMPUTER SELECT EXIT MOVE MOVE The Projector has a multilingual On Screen Display that allows you to make image adjustments and change a variety of settings. How to operate 1. To open the O[...]

28 English ... User Controls Menu Tree Main Menu Sub Menu Settings IMAGE GENERAL PICTURE MODE PRESENTATION/HIGH-BRIGHT/VIDEO/ MOVIE/SRGB/BLACKBOARD/DICOM SIM./ USER1/USER2 WALL COLOR OFF/RED/GREEN/BLUE/CYAN/ MAGENTA/YELLOW BRIGHTNESS 0~100 CONTRAST 0~100 SHARPNESS 0~32 SATURATION Depend on source format HUE Depend on source format ADVANCED GAMMA FI[...]

29 ... English User Controls Main Menu Sub Menu Settings SETTING GENERAL ORIENTATION DESKTOP FRONT/DESKTOP REAR/CEIL- ING FONT/CEILING REAR REMOTE SENSOR FRONT/TOP / FRONT / TOP HDMI SETTINGS VIDEO LEVEL (AUTO/NORMAL/ ENHANCED)/ AUDIO SELECT (HDMI1/ HDMI2 / COMPUTER) MUTE ON/OFF VOLUME 0~31 SIGNAL PHASE Depend on source format CLOCK Depend on sourc[...]

30 English ... User Controls Main Menu Sub Menu Settings OPTIONS INFORMA- TION MODEL NO. SERIAL NUMBER SOURCE RESOLUTION SOFTWARE VERSION ADVANCED STANDBY MODE NORMAL/NETWORK STANDBY DIRECT POWER ON ON/OFF AUTO POWER OFF (MIN) 0~180 OFF TIMER (MIN) 0~995 CONTROL PANEL LOCK ON/OFF[...]

31 ... English User Controls PICTURE MODE There are many factory presets optimized for various types of images. Use the or button to select the item. PICTURE MODE PRESENTATION HIGH-BRIGHT MOVIE VIDEO sRGB BLACKBOARD DICOM SIM. USER1 USER2  PRESENTATION: For computer or notebook.  HIGH-BRIGHT: Maximum brightness from PC input.  VIDEO: This [...]

32 English ... User Controls WALL COLOR Use this function to choose a proper color according to the wall. It will compensate the color deviation due to the wall color to show the correct image tone. BRIGHTNESS Adjust the brightness of the image.  Press the button to darken image.  Press the button to lighten the image. CONTRAST The contrast c[...]

33 ... English User Controls  The Color Temp is not available when “HIGH- BRIGHT” or “sRGB” is selected for “PICTURE MODE”. SCREEN IMAGE SETTING OPTIONS GENERAL ADVANCED GAMMA COLOR TEMP. DYNAMIC CONTRAST COLOR COLOR SPACE FILM LOW COMPUTER SELECT EXIT MOVE MOVE OFF AUTO BrilliantColor™ GAMMA This allows you to choose a gamma ta[...]

34 English ... User Controls COLOR Press ENTER into the next menu as below and then use the or button to select item.  RED GAIN/GREEN GAIN/BLUE GAIN/CYAN GAIN/ MAGENTA GAIN/YELLOW GAIN/RED BIAS/GREEN BIAS/BLUE BIAS: Use the or button to select RED, GREEN, BLUE, CYAN, MAGENTA AND YELLOW COLORS.  RESET: Choose “YES” to return the factory de[...]

35 ... English User Controls SCREEN IMAGE SETTING OPTIONS GENERAL 3D SETTINGS V KEYSTONE AUTO COMPUTER SELECT EXIT MOVE MOVE OVERSCAN ASPECT RATIO ASPECT RATIO Use this function to choose your desired aspect ratio.  4:3: This format is for 4×3 input sources.  16:9: This format is for 16×9 input sources, like HDTV and DVD enhanced for Wide s[...]

36 English ... User Controls TIP: 3D supported signal • For PC Signal : 1024x768@60/120Hz 1280x720@60Hz 1280x800@60/120Hz 1920x1080@60Hz • For Video Signal : 480i@60Hz • For HDMI Signal : 720p (Frame Packing) 1280 x 720@50/60/59.94 1080p (Frame Packing) 1920 x 1080@23.98/24 720p (Top and Bottom) 1280 x 720@50/60/59.94* (*Select manually) 1080[...]

37 ... English User Controls SCREEN IMAGE SETTING OPTIONS GENERAL SIGNAL LANGUAGE ORIENTATION REMOTE SENSOR HDMI SETTINGS MUTE VOLUME ENGLISH DESKTOP REAR COMPUTER SELECT EXIT MOVE MOVE ADVANCED TOP OFF LANGUAGE Choose the multilingual OSD menu. Press the or button into the sub menu and then use the or button to select your preferred language. Pres[...]

38 English ... User Controls REMOTE SENSOR Choose the remote sensor location. HDMI SETTINGS Use this feature to set HDMI1/MHL or HDMI2  VIDEO LEVEL: Select “AUTO ” to automatically detect video level. If automatic detection may not work well, select “NORMAL ” to disable the “ENHANCED ” feature of your HDMI equipment or select “ENHA[...]

39 ... English User Controls SCREEN IMAGE SETTING OPTIONS GENERAL SIGNAL PHASE CLOCK H. POSITION V. POSITION COMPUTER SELECT EXIT MOVE MOVE ADVANCED PHASE Synchronize the signal timing of the display with the graphic card. If the image appears to be unstable or ickers, use this function to correct it. CLOCK Change the display data frequency to m[...]

40 English ... User Controls SCREEN IMAGE SETTING OPTIONS GENERAL SIGNAL LOGO NETWORK CLOSED CAPTION SECURITY TEST PATTERN OFF COMPUTER SELECT EXIT MOVE MOVE ADVANCED OFF OFF OFF LOGO Use th i s f u nc t ion to di splay the st a r t up sc re en ( NEC logo ) .  ON: Displays the NEC logo.  OFF: Not display the NEC logo. NETWORK Refer to pages 4[...]

41 ... English User Controls SECURITY SECURITY TIMER CHANGE PASSWORD SELECT EXIT MOVE SECURITY OFF ADJUST SECURITY TIMER Use th i s f u nc t ion to se t how long (MO NTH/ D A Y / HOUR ) t he proj ec tor ca n b e us ed. O nce t h i s t i me ha s el apsed you wi l l be re queste d to ente r your pas sword agai n. MONTH EXIT MOVE ADJUST SECURITY TIMER[...]

42 English ... User Controls  Con r m n ew pas sword CONFIRM NEW SECURITY CODE CHANGE PASSWORD EXIT ENTER 5 . Enter t he n ew pas sword agai n a nd pr es s ENTER to con r m.  If t he i n cor re ct pa ss word is enter ed 3 t i me s, the pr oje ctor w i l l au tomat ica l ly shut d own. W h en t he pro je ctor i s t u r ned on agai n , t [...]

43 ... English User Controls NETWORK NETWORK STATUS DISCONNECT DHCP IP ADDRESS SUBNET MASK GATEWAY APPLY OFF NETWORK STATUS Display the network connection status. (default: DISCONNECT) DHCP Use this function to select your desired startup screen. If you change the setting from one to another, when you exit the OSD menu, the new setting will take ef[...]

44 English ... User Controls 1. Turn on DHCP to allow the DHCP server to automatically assign an IP, or manually enter the required network information. NETWORK NETWORK STATUS DISCONNECT DHCP IP ADDRESS SUBNET MASK GATEWAY APPLY OFF 2. Then choose apply and press ENTER button to complete the conguration process. 3. Open your web browser and type[...]

45 ... English User Controls Step 2: Select apply and press th e ENTER b utton on t he r emote c ont rol or th e cont rol pa nel to subm it function or press t he MEN U but ton on t he re mote cont rol or th e cont rol pa nel to exit. Step 3: To open Network Connections, click Start , click Control Panel , click Network and Internet Connections , a[...]

46 English ... User Controls SCREEN IMAGE SETTING OPTIONS GENERAL LAMP/FILTER SETTINGS INPUT SEARCH INPUT FAN MODE INFORMATION HIDE BACKGROUND COLOR RESET COMPUTER SELECT EXIT MOVE MOVE BLUE OFF OFF AUTO INPUT SEARCH  ON: The projector will search for other signals if the current input signal is lost.  OFF: The projector will only search curr[...]

47 ... English User Controls SCREEN IMAGE SETTING OPTIONS GENERAL LAMP/FILTER SETTINGS LAMP LIFE REMAINING LAMP HOURS USED FILTER HOURS USED ECO MODE LAMP LIFE REMINDER FILTER USAGE HOURS COMPUTER SELECT EXIT MOVE MOVE OFF OFF CLEAR LAMP HOURS CLEAR FILTER HOURS LAMP LIFE REMAINING Showing the Lamp life. LAMP HOURS USED Display the projection time.[...]

48 English ... User Controls INFORMATION To display the projector information for model no., serial number, source, resolution, and software version on the screen. COMPUTER SCREEN IMAGE SETTING OPTIONS INFORMATION ADVANCED MODEL NO. SERIAL NUMBER SOURCE RESOLUTION SOFTWARE VERSION SELECT EXIT MOVE MOVE HDMI1/ MHL COMPUTER OPTIONS | INFORMATION[...]

49 ... English User Controls SCREEN IMAGE SETTING OPTIONS INFORMATION ADVANCED STANDBY MODE DIRECT POWER ON AUTO POWER OFF (MIN) OFF TIMER (MIN) CONTROL PANEL LOCK NETWORK STANDBY COMPUTER SELECT EXIT MOVE MOVE OFF OFF STANDBY MODE  NETWORK STANDBY: Choose “NETWORK STANDBY” to save power dissipation further < 0.5W.  NORMAL: Choose “N[...]

50 English ... Appendices Problem: No image appears on screen  Ensure all the cables and power connections are correctly and securely connected as described in the “Installation” section.  Ensure the pins of connectors are not crooked or broken.  Check if the projection lamp has been securely installed. Please refer to the “Replacing[...]

51 ... English Appendices 4. Verify the resolution setting is less than or equal to 1280 x 1024 resolution. 5. Select the “Change” under the “Monitor” tab . 6. Click on “Show all devices”. Next, select “Standard monitor types” under the SP box; choose the resolution mode you need under the “Models” box.  If you are using a No[...]

52 English ... Appendices Problem: Image has vertical ickering bar  Use “CLOCK” to make an adjustment.  Check and recongure the display mode of your graphic card to make it compatible with the product. Problem: Image is out of focus  Adjust the Focus Lever on the projector lens.  Make sure the projection screen is between the [...]

53 ... English Appendices Problem: LED lighting message Power Indicator Indicator Condition Projector Condition Note Off The main power is off. Without connecting power cable. Blinking light GREEN 0.5sec ON / 0.5sec OFF The projector is getting ready to turn on. Wait for a moment. GREEN 2.5sec ON / 0.5sec OFF Off Timer is enabled. -- ORANGE 0.5sec [...]

54 English ... Appendices Problem: Message Reminders  Over temperature - the projector has exceeded its recommended operating temperature and must be allowed to cool down before it may be used. WARNING! TEMPERATURE TOO HIGH 1. MAKE SURE AIR IN AND OUTLETS ARE NOT BLOCKED. 2. MAKE SURE THE ENVIRONMENT TEMPERATURE IS UNDER 40 DEGREE C  Replacin[...]

55 ... English Appendices Installing and Cleaning the Air Filter We recommend you clean the air lter every 500 hours of operation, or more often if you are using the projector in a dusty environment. When the warning message appears on the screen, do the following to clean the air lter: WARNING! FILTER PLEASE CLEAN THE FILTER. Filter Replacin[...]

56 English ... Appendices Replacing the lamp optional lamp NP34LP The projector will detect the lamp life at 3000 hours in Eco Mode Off (4000 hours in Eco Mode On). When the “POWER” LED indicator ashes red and the message below displays on- screen, the projector has detected that the lamp is approaching its end of life. (Refer to page 23 ) I[...]

57 ... English Appendices Warning: To reduce the risk of personal injury, do not drop the lamp module or touch the lamp bulb. The bulb may shatter and cause injury if it is dropped. Lamp Replacing Procedure: 1. Switch off the power to the projector by pressing the POWER OFF button on the remote control or the button on the control panel. 2. Allow t[...]

58 English ... Appendices Cleaning procedure for the cover glass If the cover glass of projection lens is dusty or blemished, please clean it as following procedure: 1. Turn off the projector and cool projector down for a while. 2. Unplug the power cord from outlet. 3. Blow the dust by blower for cameras which you could buy from camera shops.Wipe t[...]

59 ... English Appendices Specications Optical NP-U321H Projection System Single DLP ® chip (0.65”, aspect ratio 16:9) Resolution *1 1920 × 1080 pixels (1080P) Lens Manual focus F2.4 Lamp 260W AC (220W in ECO mode) Light Output *2 *3 3200 lumens Approx. 85% in ECO mode Contrast Ratio *3 10000:1 with DYNAMIC CONTRAST ON Image Size (Diagonal) [...]

60 English ... Appendices Electrical NP-U321H Power Requirement 100 - 240V AC, 50/60 Hz Input Current 3.5-1.5A Power Consumption (Typical value) ECO Mode OFF 323W (*1)/ 312W (*2) ECO Mode 272W (*1)/ 264W (*2) Network Stand-by 2.0W (*1)/ 2.2W (*2) Normal Stand-by 0.18W (*1)/ 0.30W (*2) *1: 100V - 130VAC *2: 200V - 240VAC *4 HDMI ® (Deep Color, Lip [...]

61 ... English Appendices Regulations UL/C-UL Approved (UL 60950-1, CSA 60950-1) Meets DOC Canada Class B requirements Meets FCC Class B requirements Meets AS/NZS CISPR.22 Class B Meets EMC Directive (EN55022, EN55024, EN61000-3-2, EN61000-3-3) Meets Low Voltage Directive (EN60950-1, TÜV Approved) *6 Operational temperatures 0 to 2500 feet/760 m i[...]

62 English ... Appendices Compatibility Modes Modes Resolution (dots) V.Frequency [Hz] H.Frequency [KHz] VGA 640x480 60 31.5 VGA 640x480 72 37.9 VGA 640x480 75 37.5 VGA 640x480 85 43.3 SVGA 800x600 56 35.1 SVGA 800x600 60 37.9 SVGA 800x600 72 48.1 SVGA 800x600 75 46.9 SVGA 800x600 85 53.7 XGA 1024x768 60 48.4 XGA 1024x768 70 56.5 XGA 1024x768 75 60[...]

63 ... English Appendices (2) VGA Analog - Extended Wide timing Modes Resolution (dots) V.Frequency [Hz] H.Frequency [KHz] HD 1280x720 60 44.8 WXGA 1280x768 60 47.8 WXGA 1280x800 60 49.6 WXGA+ 1440x900 60 55.9 Full HD 1920x1080(1080P) 60 67.5 (3) VGA Analog -Component Signal Modes Resolution (dots) V.Frequency [Hz] H.Frequency [KHz] 480i 720x480 59[...]

64 English ... Appendices Modes Resolution (dots) V.Frequency [Hz] H.Frequency [KHz] VGA 640x480 60 31.5 SVGA 800x600 60 37.9 XGA 1024x768 60 48.4 QuadVGA 1280x960 60 60.0 SXGA 1280x1024 60 64.0 SXGA+ 1400x1050 60 65.3 (1) HDMI - PC Signal  HDMI Digital (2) HDMI - Extended Wide timing Modes Resolution (dots) V.Frequency [Hz] H.Frequency [KHz] HD[...]

65 ... English Appendices (3) HDMI - Video Signal Modes Resolution (dots) V.Frequency [Hz] H.Frequency [KHz] 480i 720x480(1440x480) 59.94(29.97) 15.7 576i 720x576(1440x576) 50(25) 15.6 480p 640x480 59.94 31.5 480p 720x480 59.94 31.5 576p 720x576 50 31.3 720p 1280x720 60 45.0 720p 1280x720 50 37.5 1080i 1920x1080 60(30) 33.8 1080i 1920x1080 50(25) 2[...]

66 English ... Appendices TIP: • An image with higher or lower resolution than the projector’s native resolution ( 1920 × 1080 ) will be displayed with scaling technology. • Sync on Green and Composite sync signals are not supported. • Signals other than those specied in the table above may not be displayed correctly. If this should hap[...]

67 ... English Appendices Please note that damage resulting from incorrect installation will invalidate the warranty. Ceiling Mount Installation If you wish to use a third party ceiling mount kit, please ensure the screws used to attach a mount to the projector meet the following specications:  Screw type: M4*4  Maximum screw length: 11mm [...]

68 English ... Appendices Warning: If you wish to have the projector installed on the wall: - Do not attempt to install the projector yourself. - The projector must be installed by qualified technicians in order to ensure proper operation and reduce the risk of bodily injury. - In addition, the wall must be strong enough to support the projector an[...]

69 ... English Appendices Cabinet Dimensions 108 53 98 105 93 85 27 97 382 382 292 44 44 307 414 267 254 Unit: mm Lens center[...]

70 English ... Appendices Pin Assignments of D-Sub COMPUTER Input Connector Mini D-Sub 15 Pin Connector 1 2 3 4 5 11 12 13 14 15 6 7 8 9 10 Signal Level Video signal : 0.7Vp-p (Analog) Sync signal : TTL level Pin No. RGB Signal (Analog) YCbCr Signal 1 Red Cr 2 Green Y 3 Blue Cb 4 Ground 5 Ground 6 Red Ground Cr Ground 7 Green Gro Y Ground 8 Blue Gr[...]

71 ... English Appendices PC Control Codes and Cable Connection PC Control Codes Function Code Data POWER ON 02H 00H 00H 00H 00H 02H POWER OFF 02H 01H 00H 00H 00H 03H INPUT SELECT COMPUTER 02H 03H 00H 00H 02H 01H 01H 09H INPUT SELECT HDMI 1 02H 03H 00H 00H 02H 01H A1H A9H INPUT SELECT HDMI 2 02H 03H 00H 00H 02H 01H A2H AAH INPUT SELECT VIDEO 02H 03[...]

Power   Nopower(POWERindicatordoesnotlightgreen).    Powercable'splugisfullyinsertedintothewalloutlet.    Lampcoverisinstalledcorrectly.    LampHoursUsed(lampoperationhours)wasclearedafter lampreplacement.    No?[...]

In the space below please describe your problem in detail. Information on application and environment where your projector is used Projector Modelnumber: SerialNo.: Dateofpurchase: Lampoperatingtime(hours): EcoMode: Off Eco Informationoninputsignal: Horizontalsynchfrequency [ ]kHz Verti[...]

REGISTER YOUR PROJECTOR! (for residents in the United States, Canada, and Mexico) Please take time to register your new projector. This will activate your lim- ited parts and labor warranty and InstaCare service program. Visit our web site at www.necdisplay.com , click on support center/register product and submit your completed form online. Upon r[...]

© NEC Display Solutions, Ltd. 2015 7N952121[...]