Nikon Capture 3 manual

Install Guide E n[...]

T able of Contents Introduction: About This Manual ................................................................................................... 1 Overview ......................................................................................................................................... 2 Windows ........................................[...]

1 About This Manual Introduction About This Manual Thank you for your purchase of Nikon Captur e 3. This install guide explains how to install and uninstall Nikon Capture 3 on your Windows or Macintosh computer , and how to connect your camera to your computer . It also explains how to insert a camera memory card in a car d r eader or PC card slot,[...]

2 Introduction Overview This guide is divided into two main parts, one for Windows and the other for Macintosh computers. Windows This section explains how to install and uninstall Nikon Capture 3 on your Windows computer , and how to connect your camera to your computer . It also explains how to insert the memory card in a car d reader or PC car d[...]

3 This section explains how to install and uninstall Nikon Cap- ture 3, how to connect your camera and insert the camera memory card in a car d reader or PC car d slot, how to start Nikon T ransfer , and how to r egister the camera with the sys- tem. Windows[...]

4 Windows Installing Nikon Captur e 3 Under Windows Before installing Nikon Captur e 3, make sur e that your computer meets the following system requir ements. Windows XP Home Edition/Professional, Windows 2000 Pr ofessional Installing Nikon Capture 3 under a multi-user operating system r equires Administrator privileges. When installing Nikon Capt[...]

5 Installing Nikon Capture 3 Under Windows When installing Nikon Capture 3, you can choose between Easy Install and Custom Install options. Earlier V ersions of Nikon Captur e and Nikon View Before you can install Nikon Captur e 3, you must uninstall any earlier versions of Nikon Capture or Nikon View . The following software will be installed in t[...]

6 Windows When the Nikon Capture 3 CD is inserted into a CD-ROM drive, the W elcome window will open automatically . The W elcome window contains three tabs: the Softwar e tab, the Custom Install tab, and the Customer Support tab. Clicking the Quit button will interrupt installation and close the Welcome window . If the Welcome Window Is Not Displa[...]

7 Installing Nikon Capture 3 Under Windows Easy Install The standard installation pr ocedure involves two steps: choosing the Easy Install option and installing the software. Step 1: Choose the Easy Install option In the Software tab, click Easy Install to begin installation of the driver for D1-series cameras, the Coolpix camera drivers (Windows 9[...]

8 Windows 2.2 — Install Quick T ime 5.0.2 Installation of QuickTime 5.0.2 opens with the dialog shown below . Leave the registration information blank and click Next . Follow the on-scr een instructions to complete installation and proceed to the next step. Windows 98 SE If you are using Windows 98 SE, the Coolpix Camera Drivers (all mod- els exc[...]

9 Installing Nikon Capture 3 Under Windows 2.3.2 — Personalize your copy of Nikon Capture 3 Enter your name and company (if applicable) to activate the Next button. Clicking Next will display a confirmation dialog; if the information you entered is corr ect, click Y es to proceed to the next step. Earlier V ersions of Nikon Captur e and Nikon Vie[...]

10 Windows 2.3.3 — Choose a location The folder to which Nikon Captur e 3 will be installed is shown in the Destination Folder area (the default location is …Program FilesNikonNCaptur e30). T o install to this folder , click Next . T o select a new folder , click the Browse… button and navigate to the desir ed location. 2.3.4 — Start ins[...]

11 Installing Nikon Capture 3 Under Windows 2.3.6 — Associate Nikon Capture 3 with image adjustment file extensions The dialog for image adjustment file extensions will be displayed. T o associate Nikon Capture 3 with the extensions for color balance settings (*.nca), tone curves (*.ncv), and other image adjustment settings files, click Y es (r e[...]

12 Windows The default output color -space pr ofile can be changed at any time after installation in the Color Management tab of the Nikon Captur e 3 Editor or Nikon Capture 3 Camera Contr ol Prefer ences dialog. 2.3.7 — Choose default color management settings T o use the color -space pr ofile embedded in images opened in Nikon Captur e 3, choos[...]

13 Installing Nikon Capture 3 Under Windows 2.3.8 — Complete installation of Nikon Capture 3 The following dialog is displayed when installation of Nikon Capture 3 is complete. Click Finish to proceed to the next step.[...]

14 Windows 2.4 — Install Nikon V iew 5 Installation of Nikon View 5 begins with the license agreement shown in Step 2.4.1. 2.4.1 — Accept the license agreement After making sure that you have r ead and understood the contents of the agreement, click Y es to continue installation. 2.4.2 — Choose a location The folder to which Nikon View 5 will[...]

15 Installing Nikon Capture 3 Under Windows 2.4.3 — Create a shortcut on the desktop When the Nikon View application files have been installed, the dialog shown below will ap- pear . Click Ye s to create a shortcut, allowing you to start Nikon View 5 dir ectly from an icon on the desktop. If you do not want to create a shortcut, click No . Earlie[...]

16 Windows Custom Install The standar d installation procedure involves two steps: choosing the Custom Install option and installing the software. Step 1: Choose the Custom Install option Click the Custom Install tab and check the software you want to install. Coolpix Camera Drivers (all models except 990 and 880) This check box is only displayed u[...]

17 Installing Nikon Capture 3 Under Windows Step 2: Complete installation T o begin installation of the selected software, click the Install button in the Custom Install tab. If more than one option is selected, the softwar e will be installed in the order listed. Before installation Before installing Nikon Capture 3 and the device drivers, make su[...]

18 Windows 2.1 — Install drivers If you selected PTP driver , Driver for COOLPIX 990/880 , or Driver for D1-series cameras , installation will begin with the selected drivers. The explanation that follows takes the driver for D1-series camera as an example. 2.1.1 — Begin driver installation If you selected Driver for D1-series cameras , the fol[...]

19 Installing Nikon Capture 3 Under Windows If the Updater is displayed, complete the update by following the on-screen instructions. Do not restart your computer when the update is complete; instead, continue with installation. If the Updater dialog is not displayed, complete installation normally . A Note on the PTP Driver Under W indows XP Home [...]

20 Windows Earlier V ersions of Nikon Captur e and Nikon View Before you can install Nikon Captur e 3, you must uninstall any earlier versions of Nikon Capture or Nikon View . 2.2 — Install Quick T ime 5.0.2 If you opted to install QuickTime 5.0.2, installation will open with the dialog shown below . Leave the registration information blank and c[...]

21 Installing Nikon Capture 3 Under Windows 2.3.2 — Personalize your copy of Nikon Capture 3 Enter your name and company (if applicable) to activate the Next button. Clicking Next will display a confirmation dialog; if the information you entered is corr ect, click Y es to proceed to the next step. 2.3.3 — Choose a location The folder to which [...]

22 Windows 2.3.6 — Associate Nikon Capture 3 with image adjustment file extensions The following dialog will be displayed. T o associate Nikon Capture 3 with the extensions for color balance settings (*.nca), tone curves (*.ncv), and other image adjustment settings files, click Y es (recommended). Choosing an Application for Opening Image Files I[...]

23 Installing Nikon Capture 3 Under Windows 2.3.7 — Choose default color management settings T o use the color -space profile embedded in images opened in Nikon Captur e 3, choose (A) Use the color space of the file to be opened as working color space . T o choose a default RGB color -space pr ofile for the working color space in Nikon Captur e 3[...]

24 Windows 2.3.8 — Complete installation of Nikon Capture 3 The following dialog is displayed when installation of Nikon Captur e 3 is complete. Click Finish to proceed to the next step.[...]

25 Installing Nikon Capture 3 Under Windows 2.4 — Install Nikon View 5 Installation of Nikon View 5 begins with the license agreement shown in Step 2.4.1. 2.4.1 — Accept the license agreement After making sure that you have r ead and understood the contents of the agreement, click Y es to continue installation. 2.4.2 — Choose a location The f[...]

26 Windows 2.5 — Complete installation The dialog shown below will appear when installation is complete. Click Y es to proceed. 2.4.4 — Complete installation of Nikon View 5 The following dialog is displayed when installation of Nikon View 5 is complete. Click Finish to proceed to the next step. Earlier V ersions of Nikon Captur e and Nikon Vie[...]

27 Connecting to a Computer COOLPIX Series (USB Interface) D100 (USB Interface) Connecting to a Computer If you are using a computer running Windows, make sure that you install Nikon Captur e 3 before connecting your camera to the computer for the first time. After installing Nikon Cap- ture 3, turn the camera on and connect it to the computer , or[...]

28 Windows C o m p a c t F l a s h C a r d T M E C - 6 4 C F C o m p a c t F l a s h C a r d T M E C - A D 1 A D A P T E R Using a PC Card Slot When inserted in a PC-card adapter (available separately), the camera memory car d functions as a T ype II PCMCIA A T A car d, allowing images to be read fr om the card. Inserting a Memory Card Remove the m[...]

29 Connecting to a Computer If Nikon T ransfer Does Not Start If Nikon T ransfer does not start, refer to Device Registration to confirm that the camera is r egistered as a device with your computer . Auto Start Nikon T ransfer will start automatically when: • A supported camera is connected while on and with a memory card in place • A supporte[...]

30 Windows Starting Nikon T ransfer under Windows XP The procedur e for starting Nikon T ransfer under Windows XP Home Edition/Professional dif- fers from that for other operating systems. Under Windows XP , the Removable Disk dialog is displayed when you connect the camera to the computer or insert the memory card into a card r eader or PC card sl[...]

31 Connecting to a Computer D1-Series and COOLPIX990/880 Cameras The Autoplay window will not appear when one of the above cameras is connected; instead, the Nikon T ransfer window will appear automatically . “Always do the selected action” If Always do the selected action is checked when Copy pictures to a folder on my computer (using Nikon Vi[...]

32 Windows Uninstall Uninstalling Nikon Capture 3 and Nikon View 5 This section describes how to uninstall the Windows versions of Nikon Capture 3 and Nikon View 5. Uninstalling Nikon Captur e 3 1 From the Start menu, select All Pr ograms > Nikon Cap- ture 3 > Nikon Capture 3 Uninstall (Windows XP) or Programs > Nikon Captur e 3 > Nikon[...]

33 Uninstall Windows XP Home Edition/Professional, Windows 2000 Pr ofessional Uninstalling Nikon Capture 3 and Nikon View 5 under a multi-user operating system r equires Administra- tor privileges. When uninstalling Nikon Capture 3 or Nikon View 5, log in as: Windows XP Home Edition/Professional Computer administrator Windows 2000 Professional Admi[...]

34 Windows Device Registration If you connect a supported digital camera to a Windows computer after installing Nikon Cap- ture 3 and r estarting the computer , W indows will automatically identify the camera as a new device and register the camera with the system. This section explains how to confirm that the camera is correctly r egister ed. Read[...]

35 Device Registration: D100/COOLPIX-Series Camer as D100/COOLPIX-Series Cameras Windows XP Home Edition/Professional The following explanation uses D100 as an example. After installing Nikon Capture 3 and r estarting the computer , connect your camera to the computer using a USB cable and turn the camera on . The camera will be registered automati[...]

36 Windows Device registration is now complete. Click OK to close the System Properties dialog. Step 3 Confirm that Nikon Digital Camera USB Device , Generic V olume , and USB Mass Stor - age Device are listed r espectively under Disk drives , Storage volumes , and Universal Se- rial Bus controllers . Double-click each of these listings to open the[...]

37 Device Registration: D100/COOLPIX-Series Camer as Windows 2000 Professional The following explanation uses D100 as an example. After installing Nikon Capture 3 and r estart- ing the computer , connect your camera to the computer using a USB cable and turn the cam- era on . The camera will be registered auto- matically . Follow the instructions b[...]

38 Windows Device registration is now complete. Click OK to close the System Properties dialog. Step 3 Conf irm that Nikon Digital Camera USB De- vice , Generic volume , and USB Mass Storage Device are listed respectively under Disk drives , Storage volumes , and Universal Serial Bus controllers . Double-click each of these listings to open the ass[...]

39 Device Registration: D100/COOLPIX-Series Camer as Windows Millennium Edition (Me) The following explanation uses D100 as an example. After installing Nikon Capture 3 and r estart- ing the computer , connect your camera to the computer using a USB cable and turn the cam- era on . The camera will be registered auto- matically . Follow the instruct[...]

40 Windows Device registration is now complete. Click OK to close the System Properties dialog. Step 3 Confirm that NIKON D100 , USB Disk, and USB Mass Storage Device ar e listed r espectively under Disk drives , Storage device , and Universal Serial Bus controllers . Double-click each of these listings to display the associated Properties window .[...]

41 Device Registration: D100/COOLPIX-Series Camer as Windows 98 Second Edition (SE) The following explanation uses D100 as an example. After installing Nikon Capture 3 and r estart- ing the computer , connect your camera to the computer using a USB cable and turn the cam- era on. The camera will be register ed auto- matically . Follow the instructi[...]

42 Windows Device registration is now complete. Click OK to close the System Properties dialog. Step 3 Confirm that NIKON D100 , Nikon Digital Camera Contr oller , and Nikon Digital Camera Mass Storage Driver are listed respectively under Disk drives , Hard disk controllers , and Universal Serial Bus controllers . Double-click each of these listing[...]

43 Device Registration: D100/COOLPIX-Series Camer as Reinstalling the Device Driver — Windows 98 Second Edition (SE) If NIKON D100 is listed under Other devices , you will need to reinstall the device driver . Step 1 Double-click the NIKON D100 listing under Other devices . Step 2 The NIKON D100 Properties dialog will be dis- played. Open the Gen[...]

44 Windows Step 5 The dialog shown at right will be displayed. Click Next . No Driver Found If a message is displayed stating that Windows was unable to find a suitable driver , this may indicate that the Nikon Capture 3 CD was not correctly inserted in the CD-ROM drive or that the appropriate check box was not selected. Click Back to return to the[...]

45 Device Registration: D100/COOLPIX-Series Camer as Step 8 The wizard will now start installation of the Nikon Digital Camera Controller with the dia- log shown at right. Click Next . Step 7 Click the General tab in the Nikon Digital Cam- era Mass Storage Driver dialog and confirm that This device is working properly ap- pears under Device status [...]

46 Windows Step 11 A dialog will be displayed stating that Win- dows has found the drivers for “Nikon Digi- tal Camera Contr oller”; click Next . No Driver Found If a message is displayed stating that Windows was unable to find a suitable driver , this may indicate that the Nikon Capture 3 CD was not correctly inserted in the CD-ROM drive or th[...]

47 Device Registration: D100/COOLPIX-Series Camer as Step 13 Click the General tab in the Nikon Digital Cam- era Controller Properties dialog and confir m that This device is working properly ap- pears under Device status . Click Close . Step 14 Click OK to close the System Properties dia- log.[...]

48 Windows COOLPIX990/COOLPIX 880 Windows XP Home Edition/Professional The following explanation uses COOLPIX990 as an example. After installing Nikon Captur e 3 and restarting the computer , connect your camera to the computer using a USB cable and turn the camera on. The camera will be registered automati- cally . Logging On Y ou will need to log[...]

49 Device Registration: COOLPIX990/COOLPIX880 Step 3 After confirming that NikonCOOLPIX990 is listed under Im- aging devices , double-click the listing to open the Properties window . Step 4 Click the General tab in the Nikon COOLPIX990 Properties dialog and confirm that This device is working properly appears under Device status . Click OK . Step [...]

50 Windows Reinstalling the Device Driver — Windows XP Home Edition/Professional If Nikon Digital Camera E990 ( E880 ) is listed under Other devices , you will need to reinstall the device driver . Step 1 Double-click the listing for the Nikon Digital Camera E990 that appears under Other de- vices . Step 2 The Nikon Digital Camera E990 Properties[...]

51 Device Registration: COOLPIX990/COOLPIX880 Step 4 The dialog shown at right will be displayed. Select Search r emovable media and click Next . Step 5 The dialog shown at right will be displayed. Step 6 A dialog will be displayed indicating that driver update was successful. Click Finish to close the dialog.[...]

52 Windows Step 7 Click the General tab in the Nikon COOLPIX990 Properties dialog and confirm that This device is working properly ap- pears under Device status . Click OK . Click OK to close the System Pr operties dialog.[...]

53 Device Registration: COOLPIX990/COOLPIX880 Windows 2000 Professional The following explanation uses COOLPIX990 as an example. After installing Nikon Capture 3 and r estart- ing the computer , connect your camera to the computer using a USB cable and turn the cam- era on. The camera will be register ed auto- matically . Follow the instructions be[...]

54 Windows Step 4 Click the General tab of the Nikon COOLPIX990 Properties dialog and confirm that This device is working properly ap- pears under Device status . Click OK . Device registration is now complete. Click OK to close the System Properties dialog. If no Imaging devices listing appears or if Nikon Digital Camera E990 is listed under Other[...]

55 Device Registration: COOLPIX990/COOLPIX880 Reinstalling the Device Driver — Windows 2000 Professional If Nikon Digital Camera E990 ( E880 ) is listed under Other devices , you will need to reinstall the device driver . Step 1 Double-click the listing for the Nikon Digital Camera E990 that appears under Other de- vices . Step 2 The Nikon Digita[...]

56 Windows Step 5 The dialog shown at right will be displayed. Insert the Nikon Capture 3 CD into the CD- ROM drive. T o prevent the W elcome dialog from opening automatically , hold down the shift key while inserting the CD. Select the CD-ROM drives option and click Next . The Welcome Dialog If the Welcome dialog appears when the CD is inserted, c[...]

57 Device Registration: COOLPIX990/COOLPIX880 Step 7 A dialog will be displayed indicating that driver update was successful. Click Finish to close the dialog. Step 8 Click the General tab of the Nikon COOLPIX990 Properties dialog and confirm that This device is working properly ap- pears under Device status . Click Close . Click OK to close the Sy[...]

58 Windows Windows Millennium Edition (Me) The following explanation uses COOLPIX990 as an example. After installing Nikon Capture 3 and r estart- ing the computer , connect your camera to the computer using a USB cable and turn the cam- era on. The camera will be register ed auto- matically . If a message is displayed prompting you to insert a dis[...]

59 Device Registration: COOLPIX990/COOLPIX880 If no Imaging devices listing appears or if Nikon Digital Camera E990 is listed under Other Devices , reinstall the device driver as instructed in “Reinstalling the Device Driver” ( 60). If Imaging devices is not listed in the Device Manager and Nikon Digital Camera E990 is not listed Other devices [...]

60 Windows Reinstalling the Device Driver — Windows Millennium Edition (Me) If Nikon Digital Camera E990 ( E880 ) is listed under Other devices , you will need to r einstall the device driver . Step 1 Double-click the listing for the Nikon Digital Camera E990 that appears under Other de- vices . Step 2 The Nikon Digital Camera E990 Properties dia[...]

61 Device Registration: COOLPIX990/COOLPIX880 Step 4 A dialog will be displayed indicating that driver update was successful. Click Finish to close the dialog. Step 5 Click the General tab in the Nikon COOLPIX990 Properties dialog and confir m that This device is working properly appears under Device status . Click Close . Step 6 Click OK to close [...]

62 Windows Windows 98 Second Edition (SE) The following explanation uses COOLPIX990 as an example. After installing Nikon Capture 3 and r estart- ing the computer , connect your camera to the computer using a USB cable and turn the cam- era on. The camera will be register ed auto- matically . If a message is displayed prompting you to insert a disk[...]

63 Device Registration: COOLPIX990/COOLPIX880 If no Imaging Device listing appears or if Nikon Digital Camera E990 is listed under Other Devices , reinstall the device driver as instructed in “Reinstalling the Device Driver” ( 64). If Imaging Device is not listed in the Device Manager and Nikon Digital Camera E990 is not listed Other devices , [...]

64 Windows Step 3 The W indows Update Device Driver W izard will be displayed; click Next . Reinstalling the Device Driver — Windows 98 Second Edition (SE) If Nikon Digital Camera E990 ( E880 ) is listed under Other devices , you will need to reinstall the device driver . Step 1 Double-click the listing for the Nikon Digital Camera E990 that appe[...]

65 Device Registration: COOLPIX990/COOLPIX880 Step 4 The dialog shown at right will be displayed. Select Search for a better driver than the one your device is using now and click Next . Step 5 The dialog shown at right will be displayed. Ins ert the Nikon Captur e 3 CD into the CD-ROM drive. T o prevent the W elcome dialog from opening automatical[...]

66 Windows Step 8 Click the General tab in the Nikon COOLPIX990 Properties dialog and confirm that This device is working properly ap- pears under Device status. Click Close . If the computer displays a dialog stating that usbscan.sys was not found, click Br owse… . Double-click the win98 folder and click OK . Confirm that the win98 folder on the[...]

67 Device Registration: COOLPIX990/COOLPIX880 Step 9 Click OK to close the System Properties dia- log.[...]

68 Windows D1-Series Cameras Windows XP Home Edition/Professional Before Y ou Begin Confirm that your OHCI-compliant IEEE 1394 interface board or car d has been corr ectly regis- tered with the system. Select Control Panel fr om the Star t menu. In the Contr ol Panel window , click the Perfor - mance and Maintenance icon to open the Performance and[...]

69 Device Registration: D1-Series Camer as If no “Nikon 1394 Protocol Device” listing appears or if “NIKON D1X” (or “D1” or “D1H”) is listed under Other Devices , rein- stall the device driver as instructed in “Rein- stalling the Device Driver” ( 70). If “Nikon 1394 Protocol Device” is not listed in the Device Manager and ?[...]

70 Windows Step 3 The “Hardwar e Update Wizard” dialog will appear . Holding down the shift key to pr e- vent the Welcome dialog fr om opening au- tomatically , insert the Nikon Captur e 3 CD into the CD-ROM drive. (If the shift key is not held down, the Welcome dialog will appear when the CD-ROM is inserted.) Select Install the software automa[...]

71 Device Registration: D1-Series Camer as Step 4 When the driver installation has been com- pleted, the dialog shown at right will be dis- played; click Finish to close the wizard. Step 6 Close the Device Manager , then click OK to close the System Properties window . Step 5 Confirm that “This device is working pr operly” appears under “Devi[...]

72 Windows Windows 2000 Professional Before Y ou Begin Confirm that your OHCI-compliant IEEE 1394 interface board or car d has been corr ectly regis- tered with the system. Click the My Computer icon on the desktop with the right mouse button and select Prop- erties from the menu that appears to display the System Properties dialog. Open the Hard- [...]

73 Device Registration: D1-Series Camer as If no “Nikon 1394 Protocol Device” listing appears or if “NIKON D1X” (or “D1” or “D1H”) is listed under Other Devices , rein- stall the device driver as instructed in “Rein- stalling the Device Driver” ( 74). If “Nikon 1394 Protocol Device” is not listed in the Device Manager and ?[...]

74 Windows Step 4 The Nikon Digital Camera D1 Series Proper - ties dialog will be displayed. Click the Gen- eral tab and confirm that “This device is work- ing properly” appears under “Device status”. Click Close . Close the Device Manager , then click OK to close the System Pr operties window . Device registration is now complete. Reinstal[...]

75 Device Registration: D1-Series Camer as Step 2 The Device Manager will be displayed. Double-click the listing for the Nikon D1 X (or D1 or D1 H ) that appears under “Other De- vices” or “Miscellaneous Devices.” Step 3 Open the General tab and click Reinstall Driver… . Step 4 The Windows update device driver wizard will be displayed; cl[...]

76 Windows Step 7 The dialog shown at right will be displayed; click Next . No Driver Found If the message, “Windows was unable to find a suitable driver for this device,” is displayed, this may indicate that the Nikon Capture 3 CD was not correctly inserted in the CD-ROM drive or that the correct sear ch location was not specified. Click Back [...]

77 Device Registration: D1-Series Camer as Step 10 Close the Device Manager , then click OK to close the System Properties window . Step 9 Confirm that “This device is working pr operly” appears under “Device status” in the General T ab of the Nikon Digital Camera D1 Series Prop- erties dialog. Click Close . Step 8 The dialog shown at right[...]

78 Windows Step 3 The Nikon Digital Camera D1 Properties dia- log will be displayed. Open the Driver tab and click Update Driver… . Updating Driver for the D1 — Windows 2000 Professional If you are alr eady using the D1 with Nikon View DX or Nikon Captur e, you will need to update the camera driver . Step 1 Click the My Computer icon on the des[...]

79 Device Registration: D1-Series Camer as Step 5 The dialog shown at right will be displayed. Select the search option and click Next . Step 6 The dialog shown at right will be displayed. Hold- ing down the shift key to prevent the Welcome dialog from opening automatically , insert the Nikon Capture 3 CD into the CD-ROM drive. Select CD-ROM drives[...]

80 Windows Step 9 The dialog shown at right will be displayed; click Finish . Step 7 The dialog shown at right will be displayed. Select “Install one of the other drivers” and click Next . Step 8 Select Nikon Digital Camera D1 Series from the dialog at right and click Next .[...]

81 Device Registration: D1-Series Camer as Step 11 Close the Device Manager , then click OK to close the System Properties window . Step 10 Confirm that “This device is working pr operly” appears under “Device status” in the General T ab of the Nikon Digital Camera D1 Series Prop- erties dialog. Click Close .[...]

82 Windows T roubleshooting • If “1394 Bus host Controller” is not displayed in the Device Manager , if the IEEE 1394 board or car d is listed under “Other Devices” or “Miscellaneous Devices,” or if the listing for the IEEE 1394 board or car d is preceded by a r ed or yellow warning icon… …the computer does not recognize the IEEE [...]

83 Device Registration: D1-Series Camer as Windows Millennium Edition (Me) Before Y ou Begin Confirm that the OHCI-compliant IEEE 1394 interface board has been corr ectly register ed with the system. Click the My Computer icon on the desktop with the right mouse button and select Prop- erties from the menu that appears. The Sys- tem Properties dial[...]

84 Windows Click OK to close the System Pr operties window . Device r egistration is now complete. Step 2 The Device Manager sheet will be displayed. Af- ter confirming that “Nikon 1394 Protocol De- vice” is listed in the Device Manager , click the “+” sign to its left. If no “Nikon 1394 Protocol Device” listing ap- pears or if “NIKON[...]

85 Device Registration: D1-Series Camer as Step 4 The Windows update device driver wizard will be displayed. Holding down the shift key to prevent the W elcome dialog from opening automatically , insert the Nikon Capture 3 CD into the CD-ROM drive. Confirm that “Auto- matic search for a better driver (Recom- mended)” is selected and click Next [...]

86 Windows Step 7 Click OK to close the System Properties win- dow . Step 5 The dialog shown at right will be displayed; click Finish . Step 6 Confirm that “This device is working pr operly” appears under “Device status” in the General T ab of the Nikon Digital Camera D1 Series Pr op- erties dialog. Click Close .[...]

87 Device Registration: D1-Series Camer as Step 4 The Windows update device driver wizard will be displayed. Holding down the shift key to prevent the W elcome dialog from opening automatically , insert the Nikon Capture 3 CD into the CD-ROM drive, select Automatic Search for a Better Driver (Recom- mended) , and click Next . The wizard will automa[...]

88 Windows Step 7 Confirm that “This device is working properly” appears under “Device status” in the General T ab of the Nikon Digital Camera D1 Series Properties dialog. Click Close . Step 6 The dialog shown at right will be displayed; click Finish . Step 5 The dialog shown below will be displayed. Select the driver located at “(Drive l[...]

89 Device Registration: D1-Series Camer as Step 8 Click OK to close the System Properties win- dow . T roubleshooting • If “1394 Bus Controller” is not displayed in the Device Manager , if the IEEE 1394 board or card is listed under “Other Devices” or “Miscellaneous Devices,” or if the listing for the IEEE 1394 board or car d is prece[...]

90 Windows Windows 98 Second Edition (SE) Before Y ou Begin Confirm that your OHCI-compliant IEEE 1394 interface board or car d has been corr ectly regis- tered with the system. Click the My Computer icon on the desktop with the right mouse button and select Prop- erties fr om the menu that appears. The Sys- tem Properties dialog will be displayed;[...]

91 Device Registration: D1-Series Camer as Step 2 The Device Manager sheet will be displayed. Af- ter confirming that “Nikon 1394 Protocol De- vice” is listed in the Device Manager , click the “+” sign to its left. If no “Nikon 1394 Protocol Device” listing ap- pears or if “NIKON D1X” (or “D1” or “D1H”) is listed under Other[...]

92 Windows Step 4 The Windows update device driver wizard will be displayed; click Next . Reinstalling the Device Driver — Windows 98 Second Edition (SE) If “Nikon 1394 Protocol Device” is listed Other Devices, r einstall the device driver as described below . Step 1 Click the My Computer icon on the desktop with the right mouse button and se[...]

93 Device Registration: D1-Series Camer as Step 5 The dialog shown at right will be displayed. Select “Search for a better driver than the one your device is using now . (Recommended)” and click Next . Step 6 The dialog shown at right will be displayed. Holding down the shift key to prevent the W el- come dialog from opening automatically , in-[...]

94 Windows Step 9 Confirm that “This device is working properly” appears under “Device status” in the General T ab of the Nikon Digital Camera D1 Series Properties dialog. Click Close . Step 10 Click OK to close the System Properties win- dow . Step 8 The dialog shown at right will be displayed; click Finish .[...]

95 Device Registration: D1-Series Camer as Step 4 The Windows update device driver wizard will be displayed; click Next . Updating Driver for the D1 — Windows 98 Second Edition (SE) If you are alr eady using the D1 with Nikon View DX or Nikon Capture, you will need to update the camera driver . Step 1 Click the My Computer icon on the desktop wit[...]

96 Windows Step 7 A dialog will be displayed stating that Win- dows has found the drivers for “Nikon Digital Camera D1 Series.” Click Next . No Driver Found If the message, “Windows was unable to find a suitable driver for this device,” is displayed, this may indicate that the Nikon Capture 3 CD was not correctly inserted in the CD-ROM driv[...]

97 Device Registration: D1-Series Camer as Step 9 Confirm that “This device is working properly” appears under “Device status” in the General T ab of the Nikon Digital Camera D1 Series Properties dialog. Click Close . Step 10 Click OK to close the System Properties win- dow . Step 8 The dialog shown at right will be displayed; click Finish [...]

98 Windows T roubleshooting • If “1394 Bus Controller” is not displayed in the Device Manager , if the IEEE 1394 board or card is listed under “Other Devices” or “Miscellaneous Devices,” or if the listing for the IEEE 1394 board or car d is preceded by a r ed or yellow warning icon… …the computer does not recognize the IEEE 1394 b[...]

99 This section explains how to install and uninstall Nikon Cap- ture 3, how to connect your camera and insert the camera memory card in a car d reader or PC car d slot, and how to start Nikon T ransfer . Macintosh[...]

100 Macintosh Installing Nikon Captur e 3 on a Macintosh Before installing Nikon Captur e 3, make sur e that your computer meets the following system requir ements. Mac OS X The administrator password is r equir ed when installing Nikon Capture 3 under Mac OS X. * With CarbonLib version 1.5 or later . † Camera Control with D1-series cameras not s[...]

101 Installing Nikon Capture 3 on a Macintosh Software Check the desired items and click Install . The selected software will be installed in the or der listed. 1 Nikon Capture 3 2 Nikon View 5 3 QuickTime 5.0.2 (QuickT ime 5.0.2 is not included in the list of software for Mac OS X) When the Nikon Capture 3 CD is inserted into a CD-ROM drive on a c[...]

102 Macintosh Step 2: Install software Click Install to begin installation of the software selected in the Softwar e tab. If more than one item is selected, the software will be installed in the or der listed. 2.1 — Install Nikon Capture 3 If you opted to install Nikon Capture 3, it will be installed first. 2.1.1 — Start the installer Installat[...]

103 Installing Nikon Capture 3 on a Macintosh The ReadMe file will be displayed. T ake a few moments to view this file, which may contain important information that could not be included in the manual. After viewing the ReadMe file, click Continue… . 2.1.2 — Accept the license agreement The license agreement will be displayed. After making sur [...]

104 Macintosh 2.1.5 — Start the installer Click Install in the Nikon Capture Installer dia- log to begin installation of Nikon Captur e 3. A progr ess meter will be displayed during in- stallation. 2.1.3 — Choose Easy Install Choose Easy Install from the pull-down menu in the top left corner of the Nikon Capture Installer dialog. 2.1.4 — Conf[...]

105 Installing Nikon Capture 3 on a Macintosh When (B) Always use the default RGB color space set below as the working color space for Nikon Capture 3 is selected, the ColorSync settings button will be active. Click this button to choose the default working color space in the ColorSync dialog. 2.1.6 — Personalize your copy of Nikon Capture 3 Ente[...]

106 Macintosh Add to Dock (Mac OS X) The dialog shown at right will be displayed when Nikon Capture 3 Editor and Nikon Capture 3 Camera Contr ol are installed. Click OK to add these compo- nents to the Dock. Clicking Color space details displays a description of the differ ent color -space profiles. Use this explanation to help you choose a color -[...]

107 Installing Nikon Capture 3 on a Macintosh 2.2 — Install Nikon V iew 5 If you opted to install Nikon View 5 in Step 1, the Nikon View 5 installer will start. 2.2.1 — Accept the license agreement Installation of Nikon View 5 begins with the license agreement. After making sur e that you have read and understood the contents of the agr eement,[...]

108 Macintosh 2.2.4 — Start the installer Click Install in the Nikon View 5 Installer dia- log to begin installation of Nikon Vie 5. A progr ess meter will be displayed during instal- lation. 2.2.2 — Choose Easy Install Choose Easy Install from the pull-down menu in the top left corner of the Nikon View 5 In- staller dialog. 2.2.3 — Confirm t[...]

109 Installing Nikon Capture 3 on a Macintosh 2.2.6 — Restart the computer (Mac OS X only) The dialog shown below when installation is complete. Click Restart to restart your com- puter . 2.2.5 — Complete installation of Nikon View 5 The following dialog is displayed when installation of Nikon View 5 is complete. Click Quit to proceed with inst[...]

110 Macintosh Adjusting QuickTime Settings QuickTime settings can be changed at any time after installation using the QuickTime Settings control panel. 2.3.4 — Skip registration The Registration dialog will be displayed. Leave the entry fields blank and click Con- tinue . 2.3.5 — Adjust QuickTime settings The first of three QuickTime setup dial[...]

111 Installing Nikon Capture 3 on a Macintosh 2.4 — Restart the computer When installation of all components is complete, the dialog shown below will be displayed. Click Restart to end installation and restart your computer .[...]

112 Macintosh COOLPIX Series (USB Interface) D100 (USB Interface) Connecting to a Computer Befor e connecting your camera to a Macintosh computer for the first time, make sure that you install Nikon Capture 3. After installing Nikon Captur e 3, turn the camera on and connect it to the computer , or insert the memory card into a car d r eader or a P[...]

113 Connecting to a Computer C o m p a c t F l a s h C a r d T M EC-64C F C o m p a c t F l a s h C a r d T M EC-AD1 A D A P T E R Using a PC Card Slot When inserted in a PC-card adapter (available separately), the camera memory car d functions as a T ype II PCMCIA A T A card, allowing images to be r ead fr om the card. Inserting a Memory Card Remo[...]

114 Macintosh Auto Start Nikon T ransfer will start automatically when: • A supported camera is connected while on and with a memory card in place • A supported camera with a memory card in place is connected and then turned on • A memory card fr om a supported camera (COOLPIX 600 excluded) is inserted in a card r eader or PC card slot Starti[...]

115 Connecting to a Computer 2 Select None for “Automatic T ask” and “Hot Plug Action” Select None for “Automatic T ask” and “Hot Plug Action” and close the Image Capture dialog (if you install Apple iPhoto softwar e after installing Nikon View 5, repeat steps 1 and 2 to prevent both iPhoto and Nikon View 5 fr om starting when you c[...]

116 Macintosh Uninstall Uninstalling Nikon Capture 3 and Nikon View 5 This section describes how to uninstall the Macintosh versions of Nikon Capture 3 and Nikon View 5. Uninstalling Nikon Captur e 3 1 Insert the Nikon Capture 3 CD into a CD-ROM drive and start the Nikon Captur e 3 in- staller as described on pages 145–147 of “Installing Nikon [...]

117 Uninstall Uninstalling Nikon View 5 1 Insert the Nikon Capture 3 CD into a CD-ROM drive and start the Nikon View 5 installer as described on pages 145 and 152–154 of “Installing Nikon Capture 3 on a Macintosh.” 2 Select Uninstall from the menu at the top left corner of the Nikon View Installer dialog. 3 Click the Uninstall button at the b[...]