Nissan Armada (2010) manual

2010 N I S S AN AL TI MA HYB R I D 2010 A L T IM A H Y BRID OWN E R'S MAN UAL HL3 2-D Printing : September 2009 (05) Publication No.: OM0E-HL3 2U0 Printed in U.S.A. F or your saf et y , r ead car efully and k eep in this vehicle. HL3 2-D[...]

W elcome to the growing family of new NISSAN owners. This vehicle is delivered to you with confidence. It was produced using the latest techniques and strict quality control. This manual was prepared to help you under- stand the operation and maintenance of your vehicle so that you may enjoy many miles (kilome- ters) of driving pleasure. Please rea[...]

This manual includes information for all options available on this model. Therefore, you may find some information that does not apply to your vehicle. All information, specifications and illustrations in this manual are those in effect at the time of printing. NISSAN reserves the right to change specifications or design without notice and with- ou[...]

BLUETOOTH 威 is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed to Visteon and Clarion. XM Radio 威 requires subscription, sold separately after first 90 days. Not available in Alaska, Hawaii or Guam. For more information, visit www.xmradio.com. © 2009 NISSAN NORTH AMERICA , INC. All rights reserved. No part of this Owner’s Manua[...]

NISSAN CARE S... Both NISSAN and your NISSAN dealer are dedicated to serving all your automotive needs. Y our satisfaction with your vehicle and your NISSAN dealer are our primary concerns. Y our NISSAN dealer is always available to assist you with all your automobile sales and service needs. However, if there is something that your NISSAN dealer c[...]

T able of Contents HEV Overview Illustrated table of contents Safety—Seats, seat belts and supplemental restraint system Instruments and controls Pre-driving checks and adjustments Monitor, climate, audio, phone and voice recognition systems Starting and driving In case of emergency Appearance and care Maintenance and do-it-yourself T echnical an[...]

[...]

HEV Overview Hybrid System ................................. HEV-2 High voltage battery ............................ HEV-2 High voltage cautions ........................... HEV-2 Road accident cautions ......................... HEV-3 Emergency shut off system ................... HEV-3 Energy Monitors ................................ HEV-3 P ower me[...]

The Hybrid System combines the power of a gasoline engine and an electric motor to minimize fuel consumption and emissions. Depending on driving conditions, the vehicle runs on a combination of the gasoline engine and the electric motor, whichever is best for those condi- tions. Because the gasoline engine charges the high voltage battery as needed[...]

WARNING ● Pull your vehicle off the road, put the transmission in the P (Park) position, apply the parking brake and turn the Hybrid System off. ● Check to see if there are exposed high voltage parts and cables. Never touch the parts and cables. See “High voltage components” , later in this section for the locations of the high voltage part[...]

P OWER METER The power meter indicates the total amount of power in the hybrid system. For additional information, see “Meters and gauges” in the “Instruments and controls” section of this manual. HIGH VOLTAGE BATTERY STATUS METER The gauge indicates the amount of power in the high voltage battery . For additional information, see “Meters[...]

Press the INFO button on the control panel, then touch the “Energy Flow” key on the screen. This is an example of the Energy Flow display . The Energy Flow display varies, depending on the condition of the vehicle. The graphic does not reflect the actual motion of the vehicle. The Energy Flow will display: ● When the vehicle is powered only b[...]

Press the INFO button on the control panel, and then touch the “Fuel Economy History” key on the screen. The Fuel Economy History can be displayed on the navigation system monitor. The screen must be set to the Energy Flow mode or the Fuel Economy History mode. This displays the vehi- cle’s average fuel consumption and regenerative electric p[...]

Place the ignition switch in the ON position. Depress the brake pedal and push the ignition switch when the transmission is in the P (Park) position to start the Hybrid System. The READ Y light illuminates indicating that the vehicle is ready to be driven. If the ambient tem- perature is low , the READ Y may flash and may take time until the READ Y[...]

HIGH VOLTAGE COMPONENTS WARNING ● The Hybrid System uses high voltage up to 650 V . The system can be hot while and after starting. Be careful of both the high voltage and the high temperature. Obey the caution labels attached to the vehicle. ● Never touch, disassemble, remove or replace the high voltage parts, cables and their connectors. High[...]

1. Air conditioner compressor location 2. Electric power steering location 3. 42V DC/DC converter 4. High voltage battery and 12V DC/DC converter 5. Service disconnect 6. High voltage harnesses 7. T raction motor location 8. Inverter unit The Hybrid System uses high voltage up to 650 V . High voltage components are indicated in the illustration. Hi[...]

acceleration also consumes high voltage battery power, resulting in poor acceleration. Battery power can be restored by driving at a constant speed. When you put the shift selector in the B (Brake) position and take your foot off the accelerator pedal, engine braking will be applied. However, during high speed driving you may feel that en- gine bra[...]

CAUTION Do not load large amounts of water in open containers (aquariums or buckets) into the vehicle. If the water spills onto the high voltage battery, it may cause a short circuit and damage the battery. CAUTION Do not allow any liquid to get on or in the air vent. It may cause a short circuit and damage the high voltage battery. LHV0007 LHV0008[...]

MEMO HEV-12 HEV Overview[...]

0 Illustrated table of contents Air bags, seat belts and child restraints ..............0 - 2 Exterior front ......................................0 - 3 Exterior rear .......................................0 - 4 Passenger compartment ...........................0 - 5 Instrument panel ...................................0 - 6 Engine compartment check [...]

1. T op tether strap anchor (P . 1-21) 2. Rear seat belts (P . 1-9) 3. Roof-mounted curtain side-impact supplemental air bag (P . 1-34) 4. Front seat-mounted side-impact supplemental air bag (P . 1-34) 5. Head Restraints (P . 1-6) 6. Front seat belts (P . 1-9) 7. Supplemental front-impact air bags (P . 1-34) 8. Seats (P . 1-2) 9. Occupant classific[...]

1. P ower windows (P . 2-40) 2. Windshield (P . 8-17) 3. Windshield wiper and washer switch (P . 2-28) 4. Engine hood (P . 3-18) 5. Tie down (P . 6-13) 6. Headlight and turn signal switch (P . 2-29) 7. Replacing bulbs (P . 8-24) 8. Tire pressure (P . 8-29) 9. Flat tire (P . 6-2) 10. Tire chains (P . 8-37) 11. Mirrors (P . 3-24) 12. Door locks, NISS[...]

1. Antenna (P . 4-85) 2. Rear window and outside mirror (if so equipped) defroster switch (P . 2-29) 3. Interior trunk lid release, secondary trunk lid release (P . 3-20, P . 3-19) 4. T runk lid (P . 3-18) 5. V ehicle loading (P .9-12) 6. Exterior trunk lid release (P .3-13) 7. Replacing bulbs (P . 8-24) 8. Fuel-filler cap, fuel recommendation (P .[...]

1. Secondary trunk lid release (P . 3-19) 2. Moonroof (if so equipped) (P . 2-43) 3. Sun visors (P . 3-23) 4. Interior lights, illuminated entry (P . 2-45) 5. HomeLink 姞 universal transceiver (if so equipped) (P . 2-47) 6. Automatic anti-glare rearview mirror (if so equipped) (P . 3-24) 7. Glove box (P . 2-38) 8. Front cup holders (P . 2-37) 9. F[...]

1. V ents (P . 4-18) 2. Headlight/turn signal switch (P . 2-29) 3. Steering wheel switch for audio control (if so equipped)/Bluetooth 姞 Hands-free Phone System (if so equipped) (P . 4-82, 4-86) 4. Meters and gauges (P . 2-3) 5. Driver supplemental air bag/horn (P . 1-34, 2-33) 6. Cruise control main/set switch (P . 5-15) 7. Windshield wiper/washe[...]

1. Brake fluid reservoir (P . 8-14) 2. Engine oil filler cap (P . 8-10) 3. Air cleaner (P . 8-17) 4. Fuse/fusible link box/jump-start location (P . 8-19) 5. Fuse box (P . 8-19) 6. Inverter coolant reservoir (P . 8-9) 7. Engine oil dipstick (P . 8-10) 8. Radiator cap (P . 8-8) 9. Drive belt location (P .8-15) 10. Engine coolant reservoir (P . 8-8) 1[...]

W arning light Name Page or Anti-lock Braking System (ABS) warn- ing light 2-10 or Brake warning light (red) 2-10 12-volt battery charge warning light 2-11 Electric power steering warning light 2-11 Electronically con- trolled brake warn- ing light (yellow) 2-12 Engine oil pressure warning light 2-12 W arning light Name Page High temperature warnin[...]

Indicator light Name Page Security indicator light 2-17 Slip indicator light 2-17 T urn signal/hazard indicator lights 2-17 Illustrated table of contents 0-9[...]

MEMO 0-10 Illustrated table of contents[...]

1 Safety—Seats, seat belts and supplemental restraint system Seats ............................................1 - 2 Front manual seat adjustment ....................1 - 2 Front power seat adjustment (if so equipped for driver’s seat) ..................1 - 4 Center armrest .................................1 - 5 Head restraints .................[...]

WARNING ● Do not ride in a moving vehicle when the seatback is reclined. This can be dangerous. The shoulder belt will not be against your body. In an accident, you could be thrown into it and receive neck or other serious injuries. Y ou could also slide under the lap belt and receive serious internal injuries. ● For the most effective protecti[...]

Forward and backward Pull the center of the bar up and hold it while you slide the seat forward or backward to the desired position. Release the bar to lock the seat in position. Reclining T o recline the seatback, pull the lever up and lean back. T o bring the seatback forward, pull the lever up and lean your body forward. Release the lever to loc[...]

FRONT POWER SEAT ADJUSTMENT (if so equipped for driver’s seat) Operating tips ● The power seat motor has an auto-reset overload protection circuit. If the motor stops during operation, wait 30 seconds, then reactivate the switch. ● Do not operate the power seat switch for a long period of time when the Hybrid System is not in the READ Y mode.[...]

Seat lifter (driver’s seat) Push the front or rear end of the switch up or down to adjust the angle and height of the seat cushion. Lumbar support (driver’s seat) The lumbar support feature provides lower back support to the driver. Move the switch forward or backward to adjust the seatback lumbar area. CENTER ARMREST Pull the armrest down unti[...]

HEAD RESTRAINTS WARNING Head restraints supplement the other ve- hicle safety systems. They may provide additional protection against injury in cer- tain rear end collisions. Adjust the head restraints properly, as specified in this section. Check the adjustment after someone else uses the seat. Do not attach anything to the head restraint stalks o[...]

Adjustment Adjust the head restraint so the center is level with the center of the seat occupant’s ears. T o raise the head restraint, pull it up. T o lower, push and hold the lock knob and push the head restraint down. WRS0134 LRS0888 LRS0889 Safety—Seats, seat belts and supplemental restraint system 1-7[...]

Removal Use the following procedure to remove the ad- justable head restraints. 1. Pull the head restraint up to the highest position. 2. Push and hold the lock knob and release knob. 3. Remove the head restraint from the seat. 4. Store the head restraint properly so it is not loose in the vehicle. 5. Reinstall and properly adjust the head re- stra[...]

Adjust the Active Head Restraints properly as described in this section. PRECAUTIONS ON SEAT BELT USAGE If you are wearing your seat belt properly ad- justed and you are sitting upright and well back in your seat with both feet on the floor, your chances of being injured or killed in an accident and/or the severity of injury may be greatly reduced.[...]

WARNING ● Every person who drives or rides in this vehicle should use a seat belt at all times. Children should be properly re- strained in the rear seat and, if appro- priate, in a child restraint. WARNING ● The seat belt should be properly ad- justed to a snug fit. Failure to do so may reduce the effectiveness of the entire restraint system a[...]

WARNING ● Always route the shoulder belt over your shoulder and across your chest. Never put the belt behind your back, under your arm or across your neck. The belt should be away from your face and neck, but not falling off your shoulder. ● Position the lap belt as low and snug as possible AROUND THE HIPS, NO T THE WAIST . A lap belt worn too [...]

PREGNANT WOMEN NISSAN recommends that pregnant women use seat belts. The seat belt should be worn snug and always position the lap belt as low as possible around the hips, not the waist. Place the shoulder belt over your shoulder and across your chest. Never run the lap/shoulder belt over your ab- dominal area. Contact your doctor for specific reco[...]

䊊 2 Slowly pull the seat belt out of the retractor and insert the tongue into the buckle until you hear and feel the latch engage. ● The retractor is designed to lock during a sudden stop or on impact. A slow pulling motion permits the seat belt to move, and allows you some freedom of movement in the seat. ● If the seat belt cannot be pulled [...]

Unfastening the seat belts 䊊 1 T o unfasten the seat belt, press the button on the buckle. The seat belt automatically re- tracts. Checking seat belt operation Seat belt retractors are designed to lock seat belt movement by two separate methods: ● When the seat belt is pulled quickly from the retractor. ● When the vehicle slows down rapidly .[...]

WARNING ● After adjustment, release the adjust- ment button and try to move the shoul- der belt anchor up and down to make sure it is securely fixed in position. ● The shoulder belt anchor height should be adjusted to the position best for you. Failure to do so may reduce the effec- tiveness of the entire restraint system and increase the chanc[...]

Children need adults to help protect them. They need to be properly restrained. In addition to the general information in this manual, child safety information is available from many other sources, including doctors, teachers, government traffic safety offices, and community organizations. Every child is different, so be sure to learn the best way [...]

LARGER CHILDREN Children who are too large for child restraints should be seated and restrained by the seat belts which are provided. The seat belt may not fit properly if the child is less than 4 ft 9 in (142.5 cm) tall and weighs between 40 lbs (18 kg) and 80 lbs (36 kg) . A booster seat should be used to obtain proper seat belt fit. NISSAN recom[...]

WARNING ● Failure to follow the warnings and in- structions for proper use and installa- tion of child restraints could result in serious injury or death of a child or other passengers in a sudden stop or collision: – The child restraint must be used and installed properly. Always follow all of the child restraint manufacturer’s instructions [...]

This vehicle is equipped with a universal child restraint anchor system, referred to as the LA TCH (Lower Anchors and T ethers for CHildren) sys- tem. Some child restraints include rigid or webbing-mounted attachments that can be con- nected to these anchors. For details, see “LA TCH (Lower Anchors and T ethers for CHildren) sys- tem” later in [...]

LA T CH lower anchor WARNING Failure to follow the warnings and instruc- tions for proper use and installation of child restraints could result in serious in- jury or death of a child or other passen- gers in a sudden stop or collision: – Attach LA TCH system compatible child restraints only at the locations shown in the illustration. – Do not [...]

The child restraint top tether strap must be used when installing the child restraint with the LA TCH lower anchor attachments or seat belts. See “T op tether anchor” for installation instructions. When installing a child restraint, carefully read and follow the instructions in this manual and those supplied with the child restraint. T op tethe[...]

2. Secure the child restraint anchor attach- ments to the LA TCH lower anchors. Check to make sure the LA TCH attachment is prop- erly attached to the lower anchors. 3. For child restraints that are equipped with webbing-mounted attachments, remove any additional slack from the anchor attach- ments. Press downward and rearward firmly in the center [...]

4. After attaching the child restraint, test it be- fore you place the child in it. Push it from side to side while holding the child restraint near the LA TCH attachment path. The child re- straint should not move more than 1 inch (25 mm) , from side to side. T ry to tug it forward and check to see if the LA TCH attachment holds the restraint in p[...]

WARNING The three-point seat belt with Automatic Locking Retractor (ALR) must be used when installing a child restraint. Failure to use the ALR mode will result in the child restraint not being properly secured. The restraint could tip over or be loose and cause injury to a child in a sudden stop or collision. Also, it can change the opera- tion of[...]

3. Pull the shoulder belt until the belt is fully extended. At this time, the seat belt retractor is in the Automatic Locking Retractor (ALR) mode (child restraint mode) . It reverts to the Emergency Locking Retractor (ELR) mode when the seat belt is fully retracted. 4. Allow the seat belt to retract. Pull up on the shoulder belt to remove any slac[...]

6. After attaching the child restraint, test it be- fore you place the child in it. Push it from side to side while holding the child restraint near the seat belt path. The child restraint should not move more than 1 inch (25 mm) , from side to side. T ry to tug it forward and check to see if the belt holds the restraint in place. If the restraint [...]

3. The back of the child restraint should be secured against the vehicle seatback. If the seating position does not have an adjustable headrest and it is interfering with the proper child restraint fit, try another seat- ing position or a different child restraint. 4. For child restraints that are equipped with webbing-mounted attachments, remove a[...]

6. Tighten the tether strap according to the manufacturer’s instructions to remove any slack. 7. Check to make sure the child restraint is properly secured prior to each use. If the child restraint is loose, repeat steps 1 through 6. FORWARD-FACING CHILD RESTRAINT INSTALLATION USING THE SEAT BELTS WARNING The three-point seat belt with Automatic [...]

3. Route the seat belt tongue through the child restraint and insert it into the buckle until you hear and feel the latch engage. Be sure to follow the child restraint manufacturer’s in- structions for belt routing. If the child restraint is equipped with a top tether strap, route the top tether strap and secure the tether strap to the tether anc[...]

6. Remove any additional slack from the seat belt; press downward and rearward firmly in the center of the child restraint with your knee to compress the vehicle seat cushion and seatback while pulling up on the seat belt. 7. After attaching the child restraint, test it be- fore you place the child in it. Push it from side to side while holding the[...]

10. If the child restraint is installed in the front passenger seat, place the ignition switch in the ON position. The front passenger air bag status light should illuminate. If this light is not illuminated see ⬙ Front passenger air bag and status light ⬙ in this section. Move the child restraint to another seating position. Have the system ch[...]

Booster seats of various sizes are offered by several manufacturers. When selecting any booster seat, keep the following points in mind: ● Choose only a booster seat with a label certifying that it complies with Federal Motor V ehicle Safety Standard 213 or Canadian Motor V ehicle Safety Standard 213. ● Check the booster seat in your vehicle to[...]

Booster seat installation CAUTION Do not use the lap/shoulder belt in the Automatic Locking Retractor mode when using a booster seat with the seat belts. Refer to all W arnings and Cautions in the “Child Safety” , “Child Restraint” and “Booster Seats” sections before installing a child restraint. Follow these steps to install a booster [...]

If the seating position does not have an adjustable head restraint and it is interfering with the proper booster seat fit, try another seating position or a different booster seat. 4. P osition the lap portion of the seat belt low and snug on the child’s hips. Be sure to follow the booster seat manufacturer’s in- structions for adjusting the se[...]

Roof-mounted curtain side-impact supple- mental air bag system: This system can help cushion the impact force to the head of occu- pants in front and rear outboard seating positions in certain side-impact collisions. The curtain side-impact air bags are designed to inflate on the side where the vehicle is impacted. These supplemental restraint syst[...]

● The driver and front passenger seat belt buckles are equipped with sensors that detect if the seat belts are fastened. The Advanced Air Bag System monitors the severity of a collision and seat belt us- age then inflates the air bags. Failure to properly wear seat belts can increase the risk or severity of injury in an accident. ● The front pa[...]

WARNING ● Never let children ride unrestrained or extend their hands or face out of the window. Do not attempt to hold them in your lap or arms. Some examples of dangerous riding positions are shown in the illustrations. ARS1041 ARS1042 ARS1043 Safety—Seats, seat belts and supplemental restraint system 1-37[...]

WARNING ● Children may be severely injured or killed when the front air bags, side air bags or curtain air bags inflate if they are not properly restrained. Pre-teens and children should be properly re- strained in the rear seat, if possible. ● Even with the NISSAN Advanced Air Bag System, never install a rear-facing child restraint in the fron[...]

WARNING Front seat-mounted side-impact supple- mental air bags and roof-mounted curtain side-impact supplemental air bags: ● The side air bags and curtain air bags ordinarily will not inflate in the event of a frontal impact, rear impact, rollover or lower severity side collision. Always wear your seat belts to help reduce the risk or severity of[...]

SSS0159 SSS0162 1-40 Safety—Seats, seat belts and supplemental restraint system[...]

1. Roof-mounted curtain side-impact supplemental air bag inflators 2. Roof-mounted curtain side-impact supplemental air bags 3. Front seat-mounted side-impact supplemental air bag modules 4. Air bag Control Unit (ACU) 5. Supplemental front-impact air bag modules 6. Crash zone sensor 7. Seat belt buckle switches on driver’s and passenger’s side [...]

NISSAN Advanced Air Bag System (front seats) This vehicle is equipped with the NISSAN Ad- vanced Air Bag System for the driver and front passenger seats. This system is designed to meet certification requirements under U.S. regu- lations. It is also permitted in Canada. However, all of the information, cautions and warn- ings in this manual still a[...]

Front passenger air bag and status light WARNING The front passenger air bag is designed to automatically turn OFF under some con- ditions. Read this section carefully to learn how it operates. Proper use of the seat, seat belt and child restraints is nec- essary for most effective protection. Fail- ure to follow all instructions in this manual con[...]

NISSAN recommends that pre-teens and chil- dren be properly restrained in a rear seat. NISSAN also recommends that appropriate child restraints and booster seats be properly installed in a rear seat. If this is not possible, the occupant classification sensor is designed to operate as described above to turn the front passenger air bag OFF for spec[...]

● Do not place objects with sharp edges on the seat. Also, do not place heavy objects on the seat that will leave per- manent impressions in the seat. Such objects can damage the seat or occu- pant classification sensor (pattern sen- sor) . This can affect the operation of the air bag system and result in serious personal injury. ● Do not use w[...]

Front seat-mounted side-impact supplemental air bag and roof- mounted curtain side-impact supplemental air bag systems The side air bags are located in the outside of the seatback of the front seats. The curtain air bags are located in the side roof rails. These systems are designed to meet voluntary guidelines to help reduce the risk of injury to [...]

● Right after inflation, several side air bag and curtain air bag system components will be hot. Do not touch them; you may severely burn yourself. ● No unauthorized changes should be made to any components or wiring of the side air bag and curtain air bag systems. This is to prevent damage to or accidental inflation of the side air bag and cur[...]

The pretensioner system activates in conjunction with the front air bag system. W orking with the seat belt retractor, it helps tighten the seat belt when the vehicle becomes involved in certain types of collisions, helping to restrain front seat occupants. The pretensioner is encased within the seat belt retractor. These seat belts are used the sa[...]

SUPPLEMENTAL AIR BAG WARNING LIGHT The supplemental air bag warning light, displaying in the instrument panel, moni- tors the circuits of the supplemental front-impact air bag, front seat-mounted side-impact supple- mental air bag, roof-mounted curtain side-impact supplemental air bag and seat belt pretensioner systems. The monitored circuits inclu[...]

● The front air bag, side air bag, curtain air bag systems and the pretensioner system should be inspected by a NISSAN dealer if there is any damage to the front end or side portion of the vehicle. ● If you need to dispose of a supplemen- tal air bag or pretensioners or scrap the vehicle, contact a NISSAN dealer. Incor- rect disposal procedures[...]

MEMO Safety—Seats, seat belts and supplemental restraint system 1-51[...]

2 Instruments and controls Instrument panel ...................................2 - 2 Meters and gauges ................................2 - 3 Speedometer and odometer .....................2 - 4 P ower meter ...................................2 - 4 High voltage battery status meter .................2 - 5 Fuel gauge ...................................[...]

Console light (if so equipped) ................... 2-45 Personal Lights ................................... 2-46 Map lights ....................................... 2-46 T runk light ....................................... 2-46 HomeLink 姞 universal transceiver (if so equipped) ..... 2-47 Programming HomeLink 姞 ....................... 2-47 Progra[...]

1. V ents (P . 4-18) 2. Headlight/turn signal switch (P . 2-29) 3. Steering wheel switch for audio control (if so equipped)/Bluetooth 姞 Hands-free Phone System (if so equipped) (P . 4-82, 4-86) 4. Meters and gauges (P . 2-3) 5. Driver supplemental air bag/horn (P . 1-34, 2-33) 6. Cruise control main/set switch (P . 5-15) 7. Windshield wiper/washe[...]

1. P ower meter 2. Speedometer 3. Fuel gauge 4. High voltage battery status meter 5. Odometer/twin trip odometer/trip com- puter 6. V ehicle Information Display 1. Speedometer 2. Odometer 3. Change button WIC1602 WIC1260 METERS AND GAUGES Instruments and controls 2-3[...]

SPEEDOMETER AND ODOMETER Speedometer The speedometer indicates vehicle speed. Odometer/T win trip odometer The odometer/twin trip odometer is displayed when the ignition switch is placed in the ON position. The odometer records the total distance the ve- hicle has been driven. The twin trip odometer records the distance of individual trips. Changin[...]

HIGH VOLTAGE BATTERY STATUS METER The gauge indicates the amount of power that is left in the high voltage battery . The ideal battery charge is within the normal range 䊊 1 when the gauge needle points within the zone shown in the illustration. FUEL GAUGE The gauge indicates the approximate fuel level in the tank. The gauge may move slightly duri[...]

This unit measures terrestrial magnetism and in- dicates the direction of the vehicle’s heading. With the ignition switch placed in the ON posi- tion, press the button as described in the chart below to activate various features of the automatic anti-glare rearview mirror. Push and hold the button for about: Feature: (Push button again for about [...]

Zone variation change procedure The difference between magnetic north and geo- graphical north is known as variance. In some areas, this difference can sometimes be great enough to cause false compass readings. Follow these instructions to set the variance for your particular location if this happens: 1. Press and hold the button for about 5 second[...]

1. With the display turned on, press and hold the switch for about 9 seconds. The display will read “C.” 2. Calibrate the compass by driving the vehicle in three complete circles at a maximum speed of 5 MPH (8 km/h) . 3. After completing the circles the display should return to normal. ● If the compass deviates from the correct indication soo[...]

or Anti-lock Braking System (ABS) warning light Hybrid System warning light High beam indicator light (blue) or Brake warning light (red) Low tire pressure warning light Low temperature indicator light (blue) 12–volt battery charge warning light Master warning light Malfunction Indicator Light (MIL) Electric power steering warning light Seat belt[...]

The following light comes on briefly and then goes off: If any light fails to come on, it may indicate a burned-out bulb or an open circuit in the electrical system. Have the system repaired promptly. W ARNING LIGHTS For additional information on warnings and indi- cators, see “V ehicle information display” later in this section. or Anti-lock B[...]

WARNING ● Y our brake system may not be working properly if the warning light is on. Driv- ing could be dangerous. If you judge it to be safe, drive carefully to the nearest service station for repairs. Otherwise, have your vehicle towed because driv- ing it could be dangerous. ● Pressing the brake pedal with the igni- tion switch placed in the[...]

When the ignition switch is placed in the ON position, the power steering warning light illumi- nates. After the Hybrid System is in the READ Y mode, the power steering warning light turns off. This indicates the power steering system is op- erational. If the power steering warning light illuminates while the Hybrid System is in the READ Y mode, it[...]

CAUTION If the high temperature warning light illu- minates while the engine is running, it may indicate the engine temperature is extremely high. Stop the vehicle safely as soon as possible. If the vehicle is over- heated, continuing vehicle operation may seriously damage the engine. See “If your vehicle overheats” in the “In case of emer- g[...]

TPMS malfunction: If the TPMS is not functioning properly , the low tire pressure warning light will flash for approxi- mately 1 minute when the ignition switch is placed in the ON position. The light will remain on after the 1 minute. Have the system checked by a NISSAN dealer. For additional information, see “Tire Pressure Monitoring System (TP[...]

The seat belt warning light may also illuminate if the front passenger’s seat belt is not fastened when the front passenger’s seat is occupied. For 7 seconds after the ignition switch is placed in the ON position, the system does not activate the warning light for the front passenger. Refer to “Seat belts” in the “Safety—Seats, seat bel[...]

For front passenger air bag status light operation, see “Front passenger air bag and status light” in the “Safety — Seats, seat belts and supplemental restraint system” section of this manual. High beam indicator light (blue) This blue light comes on when the headlight high beams are on and goes out when the low beams are selected. The hi[...]

The Malfunction Indicator Light may stop blinking and come on steady . Have the vehicle inspected by a NISSAN dealer. Y ou do not need to have your vehicle towed to the dealer. CAUTION Continued vehicle operation without hav- ing the emission control system checked and repaired as necessary could lead to poor driveability, reduced fuel economy, and[...]

NISSAN Intelligent K ey™ door buzzer The Intelligent K ey door buzzer sounds if the Intelligent K ey is left inside the vehicle when locking the doors. When the buzzer sounds, be sure to check both the vehicle and the Intelligent K ey . See “NISSAN Intelligent K ey™” in the “Pre- driving checks and adjustments” section. The vehicle info[...]

Fuel Economy mode The fuel economy mode can be selected to dis- play the instant fuel economy since the last reset. Average speed mode The average speed mode can be selected to display the average miles per gallon and miles per hour since the last reset. Time/Miles (km) mode The time/miles (km) mode can be selected to show the time and distance dri[...]

Range mode The range mode can be selected to give you an estimation of the distance that can be driven before refueling. The range is constantly calcu- lated based on the amount of fuel in the fuel tank and the actual fuel consumption. Exterior T emperature mode The exterior temperature mode can be selected to provide you with the temperature outsi[...]

Alert mode The alert mode allows you to set alerts notifying you of time to rest or icy conditions. The time to rest alert lets you know when you have been traveling for a long time and may need a break. The icy alert notifies you that icy driving condi- tions may exist. Reset mode The reset mode can be selected in any screen that allows for prefer[...]

Display mode The LANGUAGE/UNIT screen will appear when selecting the “Language/Unit” key and pressing . Language: English or French Unit: US — mile, °F , MPG Metric — km, °C, L/100 km Y ou can select the language and unit using the button and pressing . The settings are automatically saved when you exit the menu by pressing the BACK butto[...]

V ehicle information display warnings and indicators 1. Door and trunk open warning 2. Push warning 3. Low fuel warning 4. Low windshield-washer fluid warning 5. No key warning 6. Parking brake indicator 7. Shift P warning 8. Cruise main switch indicator 9. Cruise set switch indicator 10. Hybrid system operation indicator 11. EV mode indicator WIC1[...]

12. NISSAN Intelligent K ey™ insertion indicator 13. NISSAN Intelligent K ey™ removal indicator 14. NISSAN Intelligent K ey™ battery discharge indicator Door and trunk open warning This warning illuminates when a door or the trunk has been opened when the engine is running. Push warning After the Shift P warning illuminates, the Push warning [...]

Cruise main switch indicator This indicator illuminates when the cruise control main switch is pushed. The indicator turns off when the main switch is pushed again. When the cruise main switch indicator illuminates, the cruise control system is operational. Cruise set switch indicator light The light comes on while the vehicle speed is controlled b[...]

exterior vehicle components in all situations. Al- ways secure your vehicle even if parking for a brief period. Never leave your Intelligent K ey in the vehicle, and always lock the vehicle when unattended. Be aware of your surroundings, and park in secure, well-lit areas whenever possible. Many devices offering additional protection, such as compo[...]

(1) This device may not cause harmful in- terference, and (2) this device must accept any interference received, including inter- ference that may cause undesired opera- tion of the device. CHANGES OR MODIFICA TIONS NOT EX - PRESSL Y APPROVED B Y THE P ARTY RE- SPONSIBLE FOR COMPLIANCE COULD VOID THE USER’S AUTHORITY T O OPER- A TE THE EQUIPMENT.[...]

SWITCH OPERATION The windshield wiper and washer switch oper- ates when the ignition switch is placed in the ON position. Push the lever down to operate the wiper at the following speed: 䊊 1 Intermittent — intermittent operation can be adjusted by turning the switch toward 䊊 A (Slower) or 䊊 B (Faster) . Also, for vehicles equipped with spee[...]

T o defrost the rear window glass and outside mirrors (if so equipped) , start the Hybrid System and push the rear window defroster switch on. The rear window defroster indicator light on the switch comes on. Push the switch again to turn the defroster off. The rear window defroster automatically turns off after approximately 15 minutes. CAUTION Wh[...]

CAUTION Use the headlights with the Hybrid System running to avoid discharging the vehicle battery. Autolight system (if so equipped) The autolight system allows the headlights to be set so they turn on and off automatically . The autolight system can: ● T urn on the headlights, front parking, tail, license plate and instrument panel lights au- t[...]

Be sure you do not put anything on top of the autolight sensor located on the top side of the instrument panel. The autolight sen- sor controls the autolight ; if it is covered, the autolight sensor reacts as if it is dark out and the headlights will illuminate. If this occurs while parked with the Hybrid System off and the ignition switch placed i[...]

WARNING When the daytime running light system is active, tail lights on your vehicle are not on. It is necessary at dusk to turn on your headlights. Failure to do so could cause an accident injuring yourself and others. INSTRUMENT BRIGHTNESS CONTROL The instrument cluster illuminates when the igni- tion switch is placed in the ON position. The inst[...]

Push the switch on to warn other drivers when you must stop or park under emergency condi- tions. All turn signal lights flash. WARNING ● If stopping for an emergency, be sure to move the vehicle well off the road. ● Do not use the hazard warning flashers while moving on the highway unless unusual circumstances force you to drive so slowly that[...]

The front seats are warmed by built-in heaters. The switches are located on the center console. 1. Start the Hybrid System. 2. Push the L O or HI position of the switch, as desired. The indicator light in the switch will illuminate. The heater is controlled by a thermostat, automatically turning the heater on and off. The indicator light will remai[...]

CAUTION ● The outlet and plug may be hot during or immediately after use. ● Only certain power outlets are designed for use with a cigarette lighter unit. Do not use any other power outlet for an accessory lighter. See your NISSAN dealer for additional information. ● Do not use with accessories that ex - ceed a 12 volt, 120W (10A) power draw.[...]

SEATBACK POCKETS The seatback pockets are located on the back of the driver’s and passenger’s seats. The pockets can be used to store maps. SUNGLASSES HOLDER T o open the sunglasses holder, push and release. Only store one pair of sunglasses in the holder. WARNING Keep the sunglasses holder closed while driving to prevent an accident. CAUTION ?[...]

CUP HOLDERS T o open the front cup holders, push the cup holder lid. T o close, lower the cup holder lid and push down until it clicks in place. The plastic insert may be removed to accommo- date a larger cup size or for cleaning. The rear cup holders are located in the fold-down armrest in the rear seat back. CAUTION ● Avoid abrupt starting and [...]

GLOVE BOX Open the glove box by pulling the handle. When locking 䊊 1 or unlocking 䊊 2 the glove box, use the master key . WARNING Keep glove box lid closed while driving to help prevent injury in an accident or a sudden stop. CONSOLE BOX Upper half Pull up on the driver’s side latch to open the upper half of the console box. The mat (if so eq[...]

COVERED STORAGE BOX Push the center of the lid to open. GROCERY HOOKS The grocery hooks are located in the trunk and can be used to hang a standard size plastic grocery bag. CAUTION Do not apply a total load of more than 20 lbs (9 kg) to a single grocery hook. CARGO NET (if so equipped) WARNING Properly secure all cargo with ropes or straps to help[...]

T o install the cargo net, attach the net to the retainers. T o remove the cargo net, detach the net from the cargo net retainers. P OWER WINDOWS WARNING ● Make sure that all passengers have their hands, etc . inside the vehicle while it is in motion and before closing the windows. Use the window lock switch to prevent unexpected use of the power[...]

Driver’s side power window switch The driver’s side control panel is equipped with switches to open or close all of the windows. T o open a window , push the switch to the first detent and continue to hold down until the de- sired window position is reached. T o close a window , pull the switch to the first detent and continue to hold down unti[...]

Automatic operation T o fully open a window equipped with automatic operation, press the window switch down (only driver’s side shown) to the second detent and release it; it need not be held. The window auto- matically opens all the way . T o stop the window, lift the switch up while the window is opening. T o fully close a window equipped with [...]

AUTOMATIC MOONROOF The moonroof will only operate when the ignition switch is placed in the ON position. The auto- matic moonroof is operational for about 45 sec- onds, even if the ignition switch is placed in the ACC or OFF position. If the driver’s door or the front passenger’s door is opened during this period of about 45 seconds, power to t[...]

the 䊊 2 position again. After a delay of four seconds, the moonroof will make a small movement and backup. 3. Release the switch. 4. Within 5 seconds of releasing the switch, push and continuously hold the switch toward 䊊 2 . The moonroof will move from the tilt position to the open position and back to the close position. NO TE: If the switch [...]

The interior light has a three-position switch and operates regardless of ignition switch position. ● When the switch is in the ON position 䊊 1 , the interior light illuminates, regardless of door position. The light will go off after 30 minutes unless the ignition switch is placed in the ACC or ON position. ● When the switch is in the center[...]

T o turn the rear personal lights on, press the switch. T o turn them off, press the switch again. NO TE: Do not use for extended periods of time with the Hybrid System stopped. This could result in a discharged battery. T o turn the map lights on, press the light lens. T o turn them off, press the lens again. NO TE: Do not use for extended periods[...]

The HomeLink 姞 Universal T ransceiver provides a convenient way to consolidate the functions of up to three individual hand-held transmitters into one built-in device. HomeLink 姞 Universal T ransceiver: ● Will operate most Radio Frequency (RF) devices such as garage doors, gates, home and office lighting, entry door locks and se- curity syste[...]

3. Using both hands, simultaneously press and hold both the HomeLink 姞 button you want to program and the hand-held transmitter but- ton. DO NO T release the buttons until step 4 has been completed. 4. Hold down both buttons until the indicator light on the HomeLink 姞 flashes, changing from a “slow blink” to a “rapidly flashing blink” .[...]

NO TE: When programming a garage door opener, etc ., it is advised to unplug the device dur- ing the “cycling” process to prevent pos- sible damage to the garage door opener components. OPERATING THE HOMELINK 姞 UNIVERSAL TRANSCEIVER The HomeLink 姞 Universal T ransceiver (once pro- grammed) may now be used to activate the ga- rage door, etc.[...]

NO TE: Following step 2, there are 30 seconds in which to initiate step 3. 3. Firmly press and release the programmed HomeLink 姞 button a second time to com- plete the training process. (Some garage door openers may require you to do this procedure a third time to complete the train- ing.) The garage door opener should now recognize the HomeLink [...]

3 Pre-driving checks and adjustments K e y s .............................................3 - 2 NISSAN Intelligent K ey™ ........................3 - 2 NISSAN V ehicle Immobilizer System keys .........3 - 3 Doors ............................................3 - 4 Locking with key ................................3 - 4 Locking with inside lock knob .[...]

1. T wo Intelligent Keys 2. Mechanical keys (inside Intelligent K eys) 3. K ey number plate NISSAN INTELLIGENT K EY™ Y our vehicle can only be driven with the Intelligent K ey which are registered to your vehicle’s Intelli- gent K ey components and NISSAN V ehicle Im- mobilizer System components. Never leave these keys in the vehicle. As many a[...]

Mechanical key The Intelligent K ey contains the mechanical key . T o remove the mechanical key , release the lock knob on the back of the Intelligent K ey . T o install the mechanical key , firmly insert it into the Intelligent K ey until the lock knob returns to the lock position. Use the mechanical key to lock or unlock the doors, trunk lid and [...]

Any key that is not given to your dealer at the time of registration will no longer be able to start your vehicle. Do not allow the immobilizer system key , which contains an electrical transponder, to come into contact with salt water. This could affect system function. When the doors are locked using one of the following methods, the doors can no[...]

Opening and closing windows (if so equipped) The driver’s door key operation allows you to open and close windows equipped with auto- matic operation at the same time. ● T o open the windows, turn the driver’s door key toward the rear of the vehicle for longer than 1 second after the door is unlocked. ● T o close the windows, turn the drive[...]

Lockout protection When the power door lock switch (driver’s or front passenger’s side) is moved to the lock position with the Intelligent K ey in the port and any door open, all doors will lock and unlock automatically . With the Intelligent K ey left in the vehicle (not in the Intelligent K ey port) and any door open, all doors will unlock au[...]

WARNING ● Radio waves could adversely affect electric medical equipment. Those who use a pacemaker should contact the electric medical equipment manufac- turer for the possible influences before use. ● The Intelligent Key transmits radio waves when the buttons are pressed. The FA A advises the radio waves may affect aircraft navigation and comm[...]

CAUTION Listed below are conditions or occur- rences which will damage the Intelligent Key: ● Do not allow the Intelligent Key, which contains electrical components, to come into contact with water or salt water. This could affect the system function. ● Do not drop the Intelligent Key. ● Do not strike the Intelligent Key sharply against anoth[...]

OPERATING RANGE The Intelligent K ey functions can only be used when the Intelligent K ey is within the specified operating range from the request switch 䊊 1 . When the Intelligent K ey battery is discharged or strong radio waves are present near the operat- ing location, the Intelligent K ey operating range becomes narrower, and the Intelligent [...]

● T o prevent the Intelligent Key from being left inside the vehicle, make sure you carry the Intelligent K ey with you and then lock the doors. ● Do not pull the door handle before pushing the door handle request switch. The door will be unlocked but will not open. Release the door handle once and pull it again to open the door. NISSAN INTELLI[...]

NO TE: ● Doors lock with the door handle request switch while the ignition switch is not in the L OCK position. ● Doors do not lock by pushing the door handle request switch while any door is open. However, doors lock with the me- chanical key even if any door is open. ● Doors do not lock with the door handle request switch with the Intellige[...]

Unlocking doors 1. Carry the Intelligent K ey . 2. Push the door handle request switch 䊊 1 . 3. The hazard warning lights flash once and the outside buzzer sounds once. 4. Push the door handle request switch 䊊 1 again within 5 seconds to unlock all doors. If a door handle is pulled while unlocking the doors, that door may not be unlocked. Retur[...]

Opening the trunk lid 1. Push the trunk opener request switch 䊊 A for more than 1 second while carrying the Intel- ligent K ey with you. 2. The trunk will unlatch. A chime will sound 4 times. 3. Raise the trunk lid to open the trunk. Lockout protection T o prevent the Intelligent Key from being acci- dentally locked in the trunk, lockout protecti[...]

CAUTION After locking the doors using the Intelli- gent Key, be sure that the doors have been securely locked by operating the door handles. Unlocking doors 1. Press the button on the Intelligent Ke y. 2. The hazard warning lights flash once. 3. Press the button again within 5 sec- onds to unlock all doors. All doors will be locked automatically un[...]

Releasing the trunk lid Press the button for longer than 0.5 sec- onds to open the trunk lid. The trunk release button will not operate when the ignition switch is in the ON position or when the trunk cancel switch is in the OFF position. See “Cancel switch” in this section. Using the panic alarm If you are near your vehicle and feel threatened[...]

Silencing the horn beep feature If desired, the horn beep feature can be deacti- vated using the Intelligent K ey . T o deactivate: Press and hold the and buttons for at least 2 seconds. The hazard warning lights will flash 3 times to confirm that the horn beep feature has been deactivated. T o activate: Press and hold the and buttons for at least [...]

T ROUBLESHOOTING GUIDE V erify the location of all Intelligent Keys that are programmed for the vehicle. If another Intelligent K ey is in range or inside the vehicle, the vehicle system may respond differently than expected. Symptom Possible Cause Remedy When pushing the ignition switch to stop the Hybrid System The SHIFT P warning appears on the [...]

䊊 1 Pull the hood lock release handle located below the driver’s side instrument panel; the hood springs up slightly . 䊊 2 Lift the lever at the front of the hood with your fingertips and raise the hood. 䊊 3 Remove the support rod from the clamp. 䊊 4 Insert the support rod into the hole on the passenger’s side of the hood. 䊊 5 When cl[...]

● Closely supervise children when they are around cars to prevent them from playing and becoming locked in the trunk where they could be seriously in- jured. Keep the car locked, with the rear seatback and trunk lid securely latched when not in use, and prevent children’s access to car keys. T o open the trunk lid, push the opener switch down. [...]

NO TE: In order to remove your key from trunk compartment access panel, you must close and lock the panel. CAUTION Do not leave the access panel open. Do not store or place any items in the area behind the seats. This area contains the high voltage battery and other high volt- age components. Storage of items in this area could possibly short out t[...]

OPENER OPERATION The fuel-filler door release is located on the floor to the left of the driver’s seat. T o open the fuel- filler door, pull up the release. There may be a delay of up to 15 seconds before the fuel filler door will open. T o lock, close the fuel-filler door securely . FUEL-FILLER CAP The fuel-filler cap is a ratcheting type. T urn[...]

● Do not fill a portable fuel container in the vehicle or trailer. Static electricity can cause an explosion of flammable liquid, vapor or gas in any vehicle or trailer. T o reduce the risk of serious injury or death when filling portable fuel containers: – Always place the container on the ground when filling. – Do not use electronic devices[...]

T ELESCOPIC OPERATION Pull the lever 䊊 1 all the way toward you and adjust the steering wheel forward or backward in direction 䊊 3 , to the desired position. Lock the wheel by releasing the lever and ensure that the lever has returned to its original position. WARNING Do not adjust the steering wheel any closer to you than is necessary for prop[...]

V ANITY MIRRORS T o access the vanity mirror, pull the sun visor down and flip open the mirror cover. Some vanity mirrors are illuminated and turn on when the mirror cover is open. REARVIEW MIRROR (if so equipped) The night position 䊊 1 reduces glare from the headlights of vehicles behind you at night. Use the day position 䊊 2 when driving in d[...]

T ype A and T ype B The indicator light 䊊 2 will illuminate when the automatic anti-glare feature is operating. T o turn off the automatic anti-glare feature, press: ● the O button for inside mirrors without compass. ● the button for inside mirrors with compass. The indicator light will turn off. T o turn on the automatic anti-glare feature a[...]

Electric control type The outside mirror remote control only operates when the ignition switch is placed in the ACC or ON position. Rotate the control lever to select the right or left mirror. Adjust the mirror to the desired position by moving the control lever. Heated mirrors (if so equipped) Some outside mirrors can be heated to defrost, defog, [...]

MEMO Pre-driving checks and adjustments 3-27[...]

4 Monitor, climate, audio, phone and voice recognition systems Control panel buttons — color screen with Navigation System (if so equipped) ..................4 - 2 How to use the touch screen ....................4 - 3 How to select menus on the screen ..............4 - 5 How to use the INFO button .....................4 - 5 How to use the SETTING[...]

Antenna ...................................... 4-85 Car phone or CB radio ............................ 4-85 Bluetooth 姞 Hands-Free Phone System without Navigation System (if so equipped) ................. 4-86 Regulatory Information . ........................ 4-88 Using the system .............................. 4-88 Control buttons ..............[...]

WARNING ● Do not disassemble or modify this sys- tem. If you do, it may result in accidents, fire, or electrical shock. ● Do not use this system if you notice any abnormality, such as a frozen screen or lack of sound. Continued use of the system may result in accident, fire or electric shock. ● In case you notice any foreign object in the sys[...]

*For Navigation system control buttons, refer to the separate Navigation System Owner’s Manual. When you use this system, make sure the engine is running. If you use the system with the engine not running (ignition ON or ACC) for a long time, it will discharge the battery, and the engine will not start. Reference symbols: “Example” — Words [...]

Adjusting the item: T ouch the “+” key 䊊 1 or the “ ⫺ ” key 䊊 2 to adjust the settings of an item. T ouch the up arrow 䊊 3 to scroll up the page one item at a time, or touch the double up arrow 䊊 4 to scroll up an entire page. T ouch the down arrow 䊊 5 to scroll down the page one item at a time, or touch the double down arrow ?[...]

HOW TO SELECT MENUS ON THE SCREEN V ehicle functions are viewed on the center dis- play screen in menus. Whenever a menu selec- tion is made or menu item is highlighted, different areas on the screen provide you with important information. See the following for details. 1. Header: Shows the path used to get to the current screen (for example, press[...]

Where am I? Refer to the separate Navigation System Own- er’s Manual for information regarding this item. T raffic Info Refer to the separate Navigation System Own- er’s Manual for information regarding this item. W eather Info Refer to the separate Navigation System Own- er’s Manual for information regarding this item. Map Update Refer to th[...]

Display settings Select the “Display” key . On the screen above, select the “Display Adjustment” key. The Display Adjustment screen will appear. Brightness/contrast : Select the “Brightness” key or the “Contrast” key to adjust the brightness or contrast of the display background. T ouch the “+” or “-” key to adjust the brigh[...]

T o turn the screen on: ● Press the SETTING button and select the “Display” key and then select the “Display ON” key , or ● Press the button and the message “resuming display” will appear and the “Dis- play ON” key will be automatically turned on (no amber indicator) . Background color: Select the “Background Color” key; the[...]

Clock Format (24h) : When this item is enabled (indicator light illumi- nated) , the clock format will change from the default 12-hour display to a 24-hour display . Offset (hour) : Adjust the time by increasing or decreasing the hours. Offset (minute) : Adjust the time by increasing or decreasing the minutes. Daylight Savings Time: When this item [...]

Others settings Select the “Others” key . Comfort settings, lan- guage and units and V oice Recognition settings will be displayed. Comfort settings Select the “Others” key , then select the “Com- fort” key. The Comfort settings screen will be displayed. Y ou can set the following operating conditions by selecting the key for the desire[...]

Light Off Delay: Select to change the duration of the automatic headlight off timer. After select- ing the item, touch the “+” or “-” key to change the setting. The available delays are 0, 30, 45, 60, 90, 120, 150 and 180 seconds. Speed Sensing Wiper Interval: Select to turn on or turn off the wiper interval adjusted automati- cally accordi[...]

Select Units: Select the “US” (mi, °F , MPG) key or the “Metric” (km, °C, L/100 km) key to change the units shown on the display . V oice Recognition: For V oice Recognition settings, refer to “NISSAN V oice Recognition system” in this section. Navigation settings Refer to the separate Navigation System Own- er’s Manual for informat[...]

Press and hold the button for more than two seconds to turn the display off. Press the button again to turn the display on. When the shift selector is shifted into the R (Reverse) position, the monitor display shows the view directly to the rear of the vehicle. WARNING ● The system is designed as an aid to the driver in detecting large stationary[...]

They are indicated as reference distances to objects. The lines and colors in the display indi- cate distances from the back bumper line 䊊 A in the illustration. 䊊 1 1.5 ft (0.5 m) red 䊊 2 3 ft (1 m) yellow 䊊 3 7 ft (2 m) green 䊊 4 10 ft (3 m) green The vehicle clearance lines are wider than the actual clearance. DIFFERENCE BETWEEN PREDIC[...]

the hill is the place 䊊 B . Note that any object on the hill is viewed in the monitor farther than it appears. Backing up on a steep downhill When backing up the vehicle down a hill, the distance guide lines and the vehicle width guide lines are shown farther than the actual distance. For example, the display shows 3 ft (1.0 m) to the place 䊊 A[...]

Backing up behind a projecting object The position 䊊 C is shown farther than the position 䊊 B in the display . However, the position 䊊 C is actually at the same distance as the position 䊊 A . The vehicle may hit the object when backing up to the position 䊊 A if the object projects over the actual backing up course. WHA1506 T ype A LHA1272[...]

ADJUSTING THE SCREEN The procedure for adjusting the quality of the screen differs depending on the type of screen present on the vehicle. For vehicles without a touch screen (T ype A): ● T o adjust the Brightness and Contrast, press the ENTER button on the audio sys- tem repeatedly until the desired setting is displayed. Use the TUNE/SCROLL knob[...]

● Objects on the monitor may not be clear in a dark place or at night. ● If dirt, rain or snow attaches to the camera, the RearView Monitor may not display ob- jects. Clean the camera. ● Do not use alcohol, benzine or thinner to clean the camera. This will cause discolora- tion. T o clean the camera, wipe with a cloth dampened with a diluted [...]

1. Driver temperature control dial 2. Air flow control buttons 3. Passenger temperature control dial 4. DUAL button 5. Rear defrost button 6. Front windshield defrost button 7. Fan speed dial/system OFF button 8. Air recirculation button 9. A/C ON/OFF button 10. AUT O button WARNING ● The air conditioner cooling function op- erates only when the [...]

● Do not leave children or adults who would normally require the assistance of others alone in your vehicle. Pets should also not be left alone. They could accidentally injure themselves or others through inadvertent operation of the vehicle. Also, on hot, sunny days, temperatures in a closed vehicle could quickly become high enough to cause seve[...]

Push the AUT O button to return to automatic control of the fan speed. Air recirculation Push the air recirculation button to recir- culate interior air inside the vehicle. The indicator light on the switch will come on. The air recirculation button will not be activated when the air conditioner is in DEF or mode. Air flow control Push the air flow[...]

The air conditioner system in your NISSAN ve- hicle is charged with a refrigerant designed with the environment in mind. This refrigerant does not harm the earth’s ozone layer. Special charging equipment and lubricant is re- quired when servicing your NISSAN air condi- tioner. Using improper refrigerants or lubricants will cause severe damage to [...]

Static and flutter: During signal interference from buildings, large hills or due to antenna position (usually in conjunction with increased distance from the station transmitter) , static or flutter can be heard. This can be reduced by adjusting the treble control to reduce treble response. Multipath reception: Because of the reflective characteri[...]

Compact disc (CD) player (models without Navigation System) CAUTION ● Do not force a compact disc into the CD insert slot. This could damage the CD and/or CD player. ● Only one CD can be loaded into the CD player at a time. ● Only use high quality 4.7 in (12 cm) round disc s that have the “COMPACT disc DIGIT AL AUDIO” logo on the disc or [...]

● During cold weather or rainy days, the player may malfunction due to the hu- midity. If this occurs, remove the CD/DVD and dehumidify or ventilate the player completely. ● The player may skip while driving on rough roads. ● The CD/DVD player sometimes cannot function when the passenger compart- ment temperature is extremely high. Decrease t[...]

Copyright and trademark ● The technology protected by the U.S. patent and other intellectual property rights owned by Macrovision Corporation and other right holders is adopted for this system. ● This copyright protected technology cannot be used without a permit from Macrovision Corporation. It is limited to personal use, etc ., as long as the[...]

● Do not connect the USB device if the con- nector or cable is wet. Allow the cable and/or connectors to dry completely before connecting the USB device. ● Large video podcast files cause slow re- sponses in the iP od 姞 . The vehicle center display may momentarily black out, but it will soon recover. ● If the iP od 姞 automatically selects[...]

Compact Disc with MP3 or WMA (models without Navigation System) T erms: ● MP3 — MP3 is short for Moving Pictures Experts Group Audio Layer 3. MP3 is the most well-known compressed digital audio file format. This format allows for near “CD quality” sound, but at a fraction of the size of normal audio files. MP3 conversion of an audio track f[...]

Playback order: Music playback order of a CD with MP3 or WMA files is as illustrated. ● The names of folders not containing MP3 or WMA files are not shown in the display . ● If there is a file in the top level of the disc, “Root Folder” is displayed. ● The playback order is the order in which the files were written by the writing software[...]

Specification chart : Supported media CD, CD-R, CD-RW Supported file systems ISO9660 LEVEL1, ISO9660 LEVEL2, Apple ISO, Romeo, Joliet * ISO9660 Level 3 (packet writing) is not supported. Supported versions*1 MP3 V ersion MPEG1, MPEG2, MPEG2.5 Sampling frequency 8 kHz - 48 kHz Bit rate 8 kbps - 320 kbps, VBR WMA V ersion WMA7, WMA8, WMA9 Sampling fr[...]

T roubleshooting guide: Symptom Cause and Countermeasure Cannot play Check if the disc was inserted correctly. Check if the disc is scratched or dirty. Check if there is condensation inside the player. If there is, wait until the condensation is gone (about 1 hour) before using the player. If there is a temperature increase error, the CD player wil[...]

CD, DVD or USB with Compressed Audio Files (models with Navigation System) The file types supported by this system are MP3, WMA , AAC/M4A and A TRAC3. Explanation of terms: ● MP3 — MP3 is short for Moving Pictures Experts Group Audio Layer 3. MP3 is the most well known compressed digital audio file format. This format allows for near “CD qual[...]

Playback order: Music playback order of a CD, DVD or USB device with compressed audio files is as illus- trated. ● The folder names of folders not containing compressed audio files are not shown in the display . ● If there is a file in the top level of the disc/USB, “Root Folder” is displayed. ● The playback order is the order in which th[...]

Specification chart : Supported media CD, CD-R, CD-RW , DVD-ROM, DVD±R, DVD±RW , DVD±R DL, USB 2.0 Supported file systems CD, CD-R, CD-RW , DVD-ROM, DVD±R, DVD±RW , DVD±R DL, ISO9660 LEVEL1, ISO9660 LEVEL2, Romeo, Joliet * ISO9660 Level 3 (packet writing) is not supported. * Files saved using the Live File System component (on a Windows Vista[...]

T roubleshooting guide: Symptom Cause and Countermeasure Cannot play Check if the CD/DVD/USB device was inserted correctly. Check if the CD/DVD is scratched or dirty. Check if there is condensation inside the player. If there is, wait until the condensation is gone (about 1 hour) before using the player. If there is a temperature increase error, th[...]

Compressed Video Files (models with Navigation System) Explanation of terms: ● DivX – DivX refers to the DivX 姞 codec owned by Div , Inc. used for a lossy compres- sion of video based on MPEG-4. ● A VI – AVI stands for Audio Video Interleave. It is standard file format originated by Mi- crosoft Corporation. A .divx encoded file can be sav[...]

Requirements for Supporting Video Playback: Media CD, CD-R, CD-RW , DVD, DVD±R, DVD±RW , DVD±RW DL, USB 2.0 Memory File Systems CD, CD-R, CD-RW , DVD, DVD±R, DVD±RW , DVD±RW DL ISO9660 LEVEL1, ISO9660 LEVEL2, Romeo, Joliet, UDF Bridge (UDF1.02+ISO9660) , UDF1.5, UDF2.0 * ISO9660 Level 3 (packet writing) is not supported. * Files saved using t[...]

1. SEEK/TRACK button 2. CD insert slot 3. TUNE/FF·REW button 4. CD eject button 5. AUDIO button (BASS, TREBLE, F ADE and BALANCE) 6. CL OCK button 7. AUX IN jack 8. SCAN button 9. RDM/RPT button 10. PWR/VOL control knob 11. AUX button 12. RADIO button 13. CD button 14. DISP button 15. PRESET A·B·C button 16. Station select (1 - 6) buttons 17. pa[...]

AUDIO button (Bass, T reble, Fade and Bal- ance) Press the AUDIO button to change the mode as follows: Bass → T reble → Fade → Balance → Beep ON/OFF → Audio → Bass T o adjust Bass, T reble, Fade and Balance press the AUDIO button until the desired mode ap- pears in the display . Press the TUNE/FF·REW or to adjust Bass and T reble to th[...]

When the RADIO button is pressed while the ignition switch is in the ACC or ON position, the radio will come on at the station last played. If a compact disc is playing when the RADIO button is pressed, the compact disc will auto- matically be turned off and the last radio station played will come on. The FM stereo indicator, ST , illuminates durin[...]

SEEK/TRACK button: When is pressed while the compact disc is playing, the next track following the present one starts to play from the beginning. Press several times to skip several tracks. Each time the button is pressed, the CD ad- vances 1 additional track. The track number ap- pears in the display window . (When the last track on the compact di[...]

1. SCAN button 2. Station select (1 - 6) buttons 3. CD insert slot 4. Display screen 5. iP od MENU button 6. CD eject button 7. SEEK/CA TEGORY button 8. SETTING/ENTER button, SCROLL/ TUNE knob 9. AUX IN jack 10. AUX button 11. CD button 12. AM-FM button 13. RPT button 14. VOL/ON-OFF control knob 15. RDM button *No satellite radio reception is avail[...]

T o turn the system off, press the VOL/ON·OFF control knob. T urn the VOL/ON·OFF control knob to adjust the volume. This vehicle may be equipped with Speed Sen- sitive V olume (SSV) for audio. When this feature is active, the audio volume changes as the driving speed changes. Setting control knob (Audio, Display and Clock) : Press the SETTING but[...]

Display settings: T o adjust the brightness or contrast of the display screen, press the SETTING button until the cho- sen setting is displayed. Use the SCROLL/TUNE knob to adjust the display to the desired level. On-screen Clock: The clock is shown in the upper right corner of the screen. T o turn this feature off or to re-enable the clock display[...]

iPod 姞 MENU button This button can only be used for iP od 姞 opera- tions. See “iP od 姞 player operation without Navi- gation System” later in this section for details about the function of this button. FM/AM/SA T radio operation AM·FM button: Press the AM·FM button to change the band as follows: AM → FM1 → FM2 → AM If another audi[...]

If the battery cable is disconnected or if the fuse opens, the radio memory will be canceled. In that case, reset the desired stations. Compact disc (CD) player operation Place the ignition switch in the ACC or ON position and carefully insert the compact disc into the slot with the label side up. The compact disc is automatically pulled into the s[...]

SCROLL/TUNE knob (MP3/WMA CD only) : If an MP3/WMA CD with multiple folders is play- ing, turn the SCROLL/TUNE knob to change folders. T urn the knob to the left to skip back a folder. T urn the knob to the right to skip ahead a folder. RPT button: When the RPT button is pressed while a com- pact disc is playing, the play pattern can be changed as [...]

1. OPEN/TIL T button (Screen tilts down to expose CD/DVD insert slot) 2. Display screen 3. SETTING button 4. AUDIO button/control knob 5. Station select (1 - 6) buttons 6. Seeking button 7. VOL/ON·OFF control knob 8. DISC·AUX button 9. XM button* 10. FM·AM button 11. button *No satellite radio reception is available when the XM button is pressed[...]

This vehicle has Speed Sensitive V olume (SSV) for audio. The audio volume changes as the driv- ing speed changes. AUDIO control knob (Bass, T reble, Balance and Fade) : Press the AUDIO control knob to change the mode as follows: Bass → T reble → Balance → Fade T o adjust Bass, T reble, Balance and Fade, press the AUDIO control knob until the[...]

Display album cover art : When an audio source encoded with album cover art is played, the album cover art can be displayed on the screen. T o toggle this feature on or off, touch the “Display Album Cover Art” key . When the feature is activated, the amber indica- tor next to the word ON will illuminate. CD, DVD or USB with compressed audio fil[...]

The FM stereo indicator STEREO will illuminate during FM stereo reception. When the stereo broadcast signal is weak, the radio will automati- cally change from stereo to monaural reception. XM band select : Press the XM button to change the band as follows: XM1* → XM2* → XM3* → XM1 (satellite, if so equipped) When the XM button is pressed whi[...]

Menu (XM , if so equipped) Select the “Menu” key to see a list of options: ● Preset List – Displays the list of presets. Press and hold the key on the touchscreen to save a preset. ● Customize Channel List – deselect chan- nels to skip while using the TUNE/FOLDER knob. ● Favorite Artist & Songs – T ags the current artist or song[...]

If the system has been turned off while the com- pact disc was playing, pressing the VOL/ON·OFF control knob will start the compact disc. DISC·AUX button: When the DISC·AUX button is pressed with the system off and the compact disc loaded, the system will turn on and the compact disc will start to play . When the DISC·AUX button is pressed with[...]

● Play Mode This option allows you to alter the play pattern of the CD. T ouch the key of the mode you wish to apply . The modes change the play pattern as follows: 1 T rack Repeat - the current track is repeated. 1 Disc Random- tracks from the entire disc are played randomly . 1 Folder Repeat (compressed audio files CD only) - the current folder[...]

● T rack List The tracks on the disc are displayed. Select the key of a track name to begin playing that track. ● Title T ext Priority ● Record to Music Box, Automatic Recording, Recording Quality For more information about these options, see “Music Box™ Hard Drive Audio System” in this section. CD EJECT button: T o eject a CD, press th[...]

AUX (auxiliary) input jacks The auxiliary input jacks are located inside the center console 䊊 1 . NTSC compatible devices such as video games, camcorders and portable video players can be connected to the auxiliary input jacks. Audio devices, such as some MP3 players, can also be connected to the system through the auxiliary input jacks. The auxi[...]

DIGITAL V ERSATILE DISC (DVD) PLAYER OPERATION (models with Navigation System) Precautions Start the engine when using the DVD entertain- ment system. Movies will not be shown on the front display while the vehicle is in any drive position to reduce driver distraction. Audio is available when a movie is played. T o view movies on the front display [...]

Playing a DVD Inserting/Ejecting the DVD The CD/DVD insert slot is located behind the display screen. T o insert the DVD, press the OPEN/TIL T button on the audio unit. The display screen will automatically move down to expose the CD/DVD insert slot. Insert the DVD into the slot with the label side facing up. The DVD will be guided automatically in[...]

PLA Y: Select the key to start playing the DVD or resume playing the DVD after it has been paused. ST OP: Select the key to stop playing the DVD. NEXT/PREVIOUS CHAPTER: Select the key to skip the chapter(s) of the disc forward. Select the key to skip the chapter(s) of the disc backward. The chapters will advance forward or backward the number of ti[...]

● Angle Mark (DVD-VIDEO) When this item is turned on, an angle mark will be shown on the bottom of the screen if the scene can be seen from a different angle. ● Menu Skip (DVD-VIDEO) DVD menus are automatically configured and the contents will be played directly when the “Menu Skip” key is turned on. Note that some discs may not be played d[...]

Audio file operation AUX button: Place the ignition switch in the ON or ACC position and press the AUX button to switch to the USB input mode. If another audio source is plugged in through the AUX IN jack on the radio, the AUX button toggles between the two sources. Play information Information about the audio files being played can be displayed on[...]

RDM button: When the RDM button is pressed while an audio file on the USB device is playing, the play pattern can be changed as follows: ALL RDM → 1 FOLDER RDM → OFF ALL RDM: all tracks on the USB device will be played randomly . 1 FOLDER RDM: all tracks in the current folder will be played randomly . OFF: No random play pattern is applied. The[...]

played. Use the touchscreen to select the pre- ferred type of file. When there is only type of file in the USB memory , that audio or movie operation screen is displayed and starts to play . When you play a file with limited playing time, the confirmation screen will be displayed before starting to play the file. Confirm the playing time and select[...]

Menu: There are some options available during play- back. Select one of the following that are dis- played on the screen, if necessary . Refer to the following information for each item. ● Movie Playback Switch to the movie playback mode. This item is displayed only when the USB memory contains movie files. The shift lever must be in Park (P) wit[...]

Operation keys: T o operate the USB memory , select the desired key displayed on the display screen. ● Pause: Select the key to pause the movie file. T o resume playing the movie file, use the key . ● Play: Select the key to start playing the movie file or resume the movie file if it has been paused. ● Stop: Select the key to stop playing the[...]

● 10 Key Search Select the “10 K ey Search” key to open the number entry screen. Input the number you want to search for and the specified file or folder will be played. ● Display Adjust the image quality of the screen. ● DRC DRC (Dynamic Range Compression) auto- matically adjusts the soundtrack volume level to maintain a more even sound [...]

Audio main operation AUX button: Place the ignition switch in the ACC or ON position and press the AUX button repeatedly until the iP od 姞 mode is displayed on the screen. If another audio source is playing and the iP od 姞 is connected, press the AUX button repeatedly to switch to the iP od 姞 mode. If the vehicle audio system is turned off wh[...]

iP od 姞 * PLAYER OPERATION WITH NAVIGATION SYSTEM (if so equipped) Connecting iP od 姞 T o connect an iP od 姞 to the vehicle so that the iP od 姞 can be controlled with the audio system controls and display screen, use the USB jack located in the center console. Open the protec- tive cover 䊊 1 on the USB jack in the center console. Then con[...]

DISC·AUX button: When the DISC·AUX button is pressed with the system off and the iP od 姞 connected, the system will turn on. If another audio source is playing and the iP od 姞 is connected, press the DISC·AUX button repeatedly until the center display changes to the iP od 姞 mode. Interface: The interface for iP od 姞 operation shown on th[...]

Play mode: While the iP od 姞 is playing, touch the “Menu” key to display the iP od 姞 menu. T ouch the “Play Mode” key to display the Play Mode screen and adjust the settings for Shuffle, Repeat and Audio- books. For further information about each item, see the iP od 姞 Owner’s Manual. Seeking button: When the or side of the seeking b[...]

MUSIC BOX™ HARD DRIVE AUDIO SYSTEM (if so equipped) The Music Box Hard Drive audio system can store songs from CDs being played. The system has a 9.3 gigabyte (GB) storage capacity and can record up to 200 hours (approximately 2,900 songs) . The following CDs can be recorded in the Music Box Hard Drive audio system: ● CDs without MP3/WMA files.[...]

If the title information of the track being recorded is stored either in the hard drive or in the CD, the title is automatically displayed on the screen. For title acquisition from the hard drive, music recog- nition technology and related data are provided by Gracenote 姞 . T o view the details of the track, touch the “T ext” key on the scree[...]

● Give voice commands. For information, see “NISSAN V oice Recog- nition system” in this section. Stopping playback: The system stops playing when: ● Another mode (radio, CD, USB, Bluetooth 姞 Audio or AUX) is selected. ● The audio system is turned off. ● The ignition switch is placed in the OFF position. Seeking button: Press the side[...]

● My Playlists Displays the playlists stored in the system. T ouch the “Edit” key next to a playlist to perform the following operations for that playlist: – Add Current Song - adds the song cur- rently playing to the playlist. – Add Songs by Album - adds songs to the playlist by album. – Add Songs by Artist - adds songs to the playlist[...]

● Play Mode Alters the play mode of the playlist. T ouch the key of the mode you wish to apply . The modes change the play pattern as follows: – Normal - no play pattern is applied. – 1 Album Repeat - the songs in the current album are repeated. – 1 T rack Repeat - the current track is re- peated. – 1 Album Random - the songs in the cur- [...]

Music Box settings T o set up the Music Box Hard Drive audio system to your preferred settings, touch the “Menu” key during playback, then touch the “Music Box Set- tings” key . ● Music Box Used/Free Space: Displays the number of tracks and albums stored on the hard drive. The percentage of hard drive space taken up and the amount of rema[...]

● CDDB V ersion: Shows the version of CDDB (Compact Disc Data Base) . Gracenote 姞 NO TE: ● The information contained in the Gracenote 姞 Database is not fully guaran- teed. ● The service of the Gracenote 姞 Database on the Internet may be stopped without prior notice for maintenance. End-User License Agreement USE OF THIS PRODUCT IMPLIES [...]

USE OF THE GRACENO TE SOFTWARE OR ANY GRACENO TE SERVER. IN NO CASE WILL GRACENO TE BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENT AL DAM- AGES OR FOR ANY L OST PROFITS OR LOST REVENUES. Copyright : Music recognition technology and related data are provided by Gracenote 姞 . Gracenote is the industry standard in music recognition technol- ogy and rel[...]

4. A screen will appear asking if you are con- necting the device to use with the hands- free phone system. Select the “No” key. 5. Enter a PIN of your choice. It will be needed by your Bluetooth 姞 audio device to com- plete the connection process. See the Bluetooth 姞 audio device’s owner’s manual for more information. Audio main operat[...]

Bluetooth 姞 audio settings T o adjust the Bluetooth 姞 audio settings, follow the procedure below: 1. Press the SETTING button on the instru- ment panel. 2. Select the “Bluetooth” key. 3. Select the “Connected Devices” key. 4. Select the “ Audio Player” key. 5. A list of the connected Bluetooth 姞 audio players is displayed. Select [...]

6. The Device Name and Device Address are displayed on the screen. Select the “Select” key to make this device the active Bluetooth 姞 audio player. Select the “Edit” key to edit the details of the player, such as Device Name. Select the “Delete” key to delete the device. CD CARE AND CLEANING ● Handle a CD by its edges. Do not bend t[...]

1. Source select and P ower on switch 2. T uning switch 3. V olume control switch 1. Source select and P ower on switch 2. T uning switch 3. V olume control switch 1. Source select and P ower on switch 2. Menu control switch/ENTER button 3. V olume control switch STEERING WHEEL SWITCH FOR AUDIO CONTROL (if so equipped) POWER on switch With the igni[...]

SOURCE select switch Push the source select switch to change the mode in the following sequence: T ype A Switch: PRESET BANK A → PRESET BANK B → PRE- SET BANK C → CD* → AUX* → PRESET BANK A. * These modes are only available when compat- ible media storage is inserted into the device. While in one of the preset radio station banks (A , B o[...]

XM (if so equipped) : ● Tilt up/down for less than 1.5 seconds to increase or decrease the preset station. ● Tilt up/down for more than 1.5 seconds to go to the next or previous category . ● Press the ENTER button to show the XM Menu. iPod 姞 : ● Tilt up/down for less than 1.5 seconds to increase or decrease the track number. ● Press the[...]

ANTENNA The antenna cannot be shortened, but can be removed. When you need to remove the antenna, turn the antenna rod counterclockwise 䊊 B . T o install the antenna rod, turn the antenna rod clockwise 䊊 A and hand tighten. CAUTION Always properly tighten the antenna rod during installation or the antenna rod may break during vehicle operation.[...]

CAUTION ● Keep the antenna as far away as pos- sible from the electronic control modules. ● Keep the antenna wire more than 8 in (20 cm) away from the electronic con- trol system harnesses. Do not route the antenna wire next to any harness. ● Adjust the antenna standing-wave ratio as recommended by the manufacturer. ● Connect the ground wir[...]

Y our NISSAN is equipped with the Bluetooth 姞 Hands-Free Phone System. If you have an ap- proved Bluetooth 姞 enabled cellular phone, you can set up the wireless connection between your cellular phone and the in-vehicle phone module. With Bluetooth 姞 wireless technology , you can make or receive a hands-free telephone call with your cellular p[...]

– Y our cellular phone is locked to prevent it from being dialed. ● When the radio wave condition is not ideal or ambient sound is too loud, it may be difficult to hear the other person’s voice dur- ing a call. ● Do not place the cellular phone in an area surrounded by metal or far away from the in-vehicle phone module to prevent tone quali[...]

Operating tips T o get the best performance out of the NISSAN V oice Recognition system, observe the following: ● K eep the interior of the vehicle as quiet as possible. Close the windows to eliminate surrounding noises (traffic noises, vibration sounds, etc.) , which may prevent the system from recognizing voice commands correctly . ● W ait un[...]

– NO T “One eight hundred six six two sixty two hundred,” and – NO T “One eight oh oh six six two sixty two hundred” ● Numbers can be spoken in small groups. The system will prompt you to continue en- tering digits, if desired. Example: 1-800-662-6200 – “One eight zero zero” The system repeats the numbers and prompts you to ente[...]

Y ou can also use the button to interrupt the system feedback and give a command at once. See “List of voice commands” and “During a call” in this section for more information. PHONE/END While the voice recognition sys- tem is active, press and hold the button for 5 seconds to quit the voice recognition system at any time. TUNING SWIT CH Wh[...]

3. Say: “ Add phone” 䊊 B . The system acknowl- edges the command and asks you to initiate connecting from the phone handset 䊊 C . The connecting procedure of the cellular phone varies according to each cellular phone model. See the cellular phone Own- er’s Manual for details. Y ou can also visit www .nissanusa.com/bluetooth for instruc- t[...]

LIST OF VOICE COMMANDS Main Menu “Call” “Phonebook” “Recent Calls” “Connect Phone” When you press and release the button on the steering wheel, you can choose from the commands on the Main Menu. The following pages describe these commands and the com- mands in each sub-menu. Remember to wait for the tone before speaking. After the m[...]

If a call back number does not exist, the system announces, “There is no number to call back” and ends the VR session. During a call During a call there are several command options available. Press the button on the steering wheel to mute the receiving voice and enter com- mands. ● “Help” — The system announces the avail- able commands.[...]

“T ransfer entry” 䊊 A Use the T ransfer Entry command to store a new name in the system. When prompted by the system, say the name you would like to give the new entry . For example, say: “Mary .” If the name is too long or too short, the system tells you, then prompts you for a name again. Also, if the name sounds too much like a name al[...]

difficulty recognizing. For more information see “Record Name” in this section. NO TE: Each phone has its own separate phone- book. Y ou cannot access Phone A’s phone- book if you are currently connected with Phone B . “List names” 䊊 A Use the List Names command to hear all the names and locations in the phone book. The system recites t[...]

Use the Recent Calls command to access out- going, incoming or missed calls. “Outgoing” 䊊 A Use the Outgoing command to list the outgoing calls made from the vehicle. “Incoming” 䊊 B Use the Incoming command to list the incoming calls made to the vehicle. “Missed” 䊊 C Use the Missed command to list the calls made to the vehicle tha[...]

5. Press the button. For information on selecting a different lan- guage, see “Choosing a language” in this section. 6. V oice memory A or memory B is selected automatically . If both memory locations are already in use, the system will prompt you to overwrite one. Follow the instructions pro- vided by the system. 7. When preparation is complet[...]

● go back ● call five six two eight zero ● dial six six four three seven MANUAL CONTROL While using the voice recognition system, it is possible to select menu options by using the steering wheel controls instead of speaking voice commands. The manual control mode does not allow dialing a phone number by digits. The user may select an entry f[...]

T ROUBLESHOOTING GUIDE The system should respond correctly to all voice commands without difficulty . If problems are en- countered, try the following solutions. Where the solutions are listed by number, try each solution in turn, starting with number 1, until the problem is resolved. Symptom Solution System fails to interpret the command correctly[...]

WARNING ● Use a phone after stopping your vehicle in a safe location. If you have to use a phone while driving, exercise extreme caution at all times so full attention may be given to vehicle operation. ● If you are unable to devote full attention to vehicle operation while talking on the phone, pull off the road to a safe location and stop you[...]

phone module when the ignition switch is placed in the ON position with the connected cellular phone turned on and carried in the vehicle. Y ou can register up to 5 different Bluetooth 姞 cellular phones to the in-vehicle phone module. However, you can talk on only one cellular phone at a time. NISSAN V oice Recognition system supports the phone c[...]

REGULATORY INFORMATION FCC Regulatory information – CAUTION: T o maintain compliance with FCC’s RF exposure guidelines, use only the supplied antenna. Unauthorized antenna, modification, or attachments could damage the transmitter and may violate FCC regula- tions. – Operation is subject to the following two con- ditions: 1. This device may n[...]

2. Select the “Connect Bluetooth” key . 3. A popup box will appear on the screen, prompting you to confirm that the connec- tion is for the phone system. Select the “Y es” key . 4. When a PIN code appears on the screen, operate the Bluetooth 姞 cellular phone to enter the PIN code. The connecting procedure of the cellular phone varies acco[...]

V EHICLE PHONEBOOK This vehicle has two phonebooks available for your use. Depending on your phone, the system may automatically download your entire cell phone’s phonebook into the “Handset Phone- book” . For the details on downloading your phonebook, see “Handset phonebook” in this section. If your phonebook does not automati- cally dow[...]

● Copy from Call History The system will show a list of your incoming, outgoing or missed calls that were down- loaded from your cell phone (depending on your phone’s compatibility) . Y ou may select one of these entries to save in the vehicle phonebook. ● Copy from the Handset The system will show your cell phone’s phonebook that was downl[...]

● V oicetag Confirm and store the voicetag. V oicetags allow easy dialing using the NISSAN V oice Recognition system. For more information, see “NISSAN V oice Recognition System” in this section. T o delete an entry , select the “Delete” key at step 3. HANDSET PHONEBOOK Many phones will support an automatic down- load of the cellular phon[...]

MAKING A CALL T o make a call, follow the procedure below: 1. Press the button on the steering wheel. The “Phone” screen will appear on the display . 2. Select one of the following options to make a call: ● V ehicle Phonebook: Select the name from an entry stored in the vehicle phonebook. ● Handset Phonebook: Select the name from an entry s[...]

Answer: Accept an incoming call to talk. Hold Call: Put an incoming call on hold. Reject Call: Reject an incoming call. T o finish the call, follow one of the procedures listed below: a. Select the “Reject Call” key on the display. b. Press and hold the phone button on the steering wheel switches. DURING A CALL There are some options available [...]

ENDING A CALL T o finish the call, perform one of the following procedures: ● Select the “Hang up” key on the “Call in Progress” display . ● Push the switch on the steering wheel. PHONE SETTINGS T o set up the Bluetooth 姞 Hands-Free Phone System to your preferred settings, press the SET - TING button on the instrument panel and select[...]

V olume & Ringtone: Adjust the volume level of the ringtone, incoming call sound and outgoing call sound. When the “ Automatic Hold” option is turned on, an incom- ing call will be placed on hold automatically after several rings. When the “V ehicle Ringtone” op- tion is turned on, a specific ringtone that is differ- ent from the cellul[...]

CALL VOLUME Adjusting the incoming or outgoing call volume may improve clarity if reception between callers is unclear. ● Incoming call — adjusting this setting allows you to hear a difference in volume. ● Outgoing call — adjusting this setting allows the person you are talking with to hear a difference in volume. T o access the settings, p[...]

T o improve the recognition success rate when Alternate Command Mode is active, try using the Speaker Adaptation Function available in that mode. See “Speaker Adaptation Function” in this section. Otherwise, it is recommended that Alter- nate Command Mode be turned off and Standard Mode be used for the best recognition perfor- mance. While usin[...]

Available items: ● Getting Started Describes the basics of how to operate the V oice Recognition system. ● Let’s Practice Initiates a practice session that demon- strates how to improve voice recognition by the system. ● Using the Address Book T utorial for using the Address Book ● Finding a Street Address T utorial for entering a destina[...]

Let’s Practice The system is equipped with a tutorial that allows you to practice saying commands and receive feedback on the volume, speed and timing of your speech. T o initiate a practice session, access the User Guide and select the “Let’s Practice” key. Follow the on-screen prompts until the session is com- plete. After the session is [...]

V oice recognition settings The available settings of the NISSAN V oice Rec- ognition system are described. 1. Select “V oice Recognition”. 2. Y ou can confirm the page by scrolling the screen. USING THE SYSTEM Initialization When the ignition switch is placed in the ON position, NISSAN V oice Recognition is initialized, which takes a few secon[...]

2. A list of commands appears on the screen, and the system announces, “W ould you like to access Phone, Navigation, Information, Audio or Help?” 3. After the tone sounds and the icon on the screen changes from to , speak a command. 4. Continue to follow the voice menu prompts and speak after the tone sounds until your desired operation is comp[...]

Standard Mode command list Category Command: COMMAND ACTION Phone Displays Phone function commands. Navigation Displays Navigation function commands. Information Displays V ehicle Information. Audio Displays Audio commands. Help Displays User Guide. Phone Command: COMMAND ACTION Dial Number Makes a call to a spoken phone number up to 10 digits. Cha[...]

Navigation Command: COMMAND ACTION Home Sets a route to your home that is stored in the Address Book. Address Searches for a location by the street address specified, and sets a route (for continental US and Canada only) . Places Sets a route to a facility near the current vehicle location. Address Book Searches for a location stored in the Address[...]

V oice command examples Some basic voice command examples are de- scribed here. For navigation system commands, see the sepa- rate Navigation System Owner’s Manual. Example 1 — Placing a call to the phone number 800-662-6200: 1. Press the switch located on the steer- ing wheel. 2. The system announces, “W ould you like to access Phone, Naviga[...]

4. Say “Dial Number”. 5. Say “800” . 6. The system announces, “Please say the next three digits or dial, or say change number.” 7. Say “662” . LHA1334 LHA1335 LHA1336 Monitor, climate, audio, phone and voice recognition systems 4-121[...]

8. The system announces, “Please say the last four digits or say change number.” 9. Say “6200” . 10. The system announces, “Dial or Change Number?” 11. Say “Dial” . 12. The system makes a call to 800-662- 6200. NO TE: ● Y ou can also speak “800-662-6200” (10 continuous digits) or “662-6200” (7 con- tinuous digits) , if the[...]

Example 2 — Placing an international call to the phone number 011-81-111-222-3333: 1. Press the switch located on the steer- ing wheel. 2. The system announces, “W ould you like to access Phone, Navigation, Information, Au- dio or Help?” 3. Say “Phone” . 4. Say “International Call” . LHA0768 LHA1333 LHA1334 Monitor, climate, audio, ph[...]

5. Say “011811112223333” . 6. Say “Dial” . 7. The system makes a call to 011-81-111- 222-3333. NO TE: Any digit input format is available in the International Number input process, as well as the special characters such as star (*) , pound (#) , and plus (+) . NISSAN V OICE RECOGNITION ALTERNATE COMMAND MODE The Alternate Command Mode enabl[...]

Activating Alternate Command Mode 1. Press the SETTING button on the instru- ment panel. 2. Select the “Others” key on the display. 3. Select the “V oice Recognition” key . 4. Select the “ Alternate Command Mode” key. 5. The confirmation message is displayed on the screen. Select the “OK” key to activate the Alternate Command Mode. [...]

Only manual controls such as the touchscreen can navigate the command list menu. As an alternative to the voice command “Help” , you may access the command list using the fol- lowing steps: 1. Press the INFO button on the instrument panel. 2. Select the “Others” key. 3. Select the “V oice Recognition” key . NO TE: Y ou can skip steps 1 [...]

Alternate Command Mode command list Phone Command: COMMAND ACTION Dial Number Makes a call to a spoken phone number up to 10 digits. V ehicle Phonebook Makes a call to a contact in the vehicle phonebook. Handset Phonebook Makes a call to a contact in the handset phonebook. International Call Makes an international call by allowing more than 10 digi[...]

COMMAND ACTION Birdview Map Changes the Map display to Birdview. Planview Map Changes the Map display to a 2-dimensional view. North Up Changes the Map display to keep north pointing up on the screen. Heading Up Changes the Map display to keep the direction of the vehicle pointing up on the screen. Zoom In <1 to 13> Changes the map scale to a[...]

Audio Command: COMMAND ACTION AM T urns to the AM band, selecting the station last played. FM T urns to the FM band, selecting the station last played. XM T urns to the SA T band, selecting the station last played. Music Box Turns to the Music Box hard-disk drive audio system. CD Starts to play a CD. USB T urns to the USB audio input. Bluetooth Aud[...]

Displaying user guide Y ou can confirm how to use voice commands by accessing a simplified User Guide, which con- tains basic instructions and tutorials for several voice commands. 1. Press the INFO button on the instrument panel. 2. Select the “Others” key. 3. Select the “V oice Recognition” key . 4. Select the “User Guide” key. 5. Sel[...]

Before starting T o get the best performance from NISSAN V oice Recognition, observe the following: ● K eep the interior of the vehicle as quiet as possible. Close the windows to eliminate the surrounding noises (traffic noises, vibration sounds, etc.) , which may prevent the system from recognizing the voice commands cor- rectly . ● When the c[...]

Operating tips ● Say a command after the tone. V oice com- mands cannot be accepted when the icon is . ● If the command is not recognized, the sys- tem repeats the announcement. Repeat the command in a clear voice. ● Press the switch on the steering wheel to return to the previous screen. ● If you want to cancel the command, press and hold [...]

Speaker Adaptation: Starts a system training procedure to learn the specific sounds of your voice. See “Speaker ad- aptation function” in this section. Alternate Command Mode: For advanced operation, an Alternate Command Mode is provided. This setting enables control of the Audio and Climate Control systems in addi- tion to additional commands [...]

5. Select a category to be learned by the sys- tem from the following list: ● Phone ● Navigation ● Information ● Audio ● Help The voice commands in the category are displayed. 6. Select a voice command to train. The V oice Recognition system starts. 7. The system requests that you repeat a com- mand after a tone. This command is also disp[...]

T ROUBLESHOOTING GUIDE The system should respond correctly to all voice commands without difficulty . If problems are en- countered, follow the solutions given in this guide for the appropriate error. Where the solutions are listed by number, try each solution in turn, starting with number one, until the problem is resolved. Symptom/error message S[...]

MEMO 4-136 Monitor, climate, audio, phone and voice recognition systems[...]

5 Starting and driving Precautions when starting and driving ................5 - 2 Exhaust gas (carbon monoxide) ..................5 - 2 Three-way catalyst ..............................5 - 3 Tire Pressure Monitoring System (TPMS) ..........5 - 3 Avoiding collision and rollover ....................5 - 5 Off-road recovery ...........................[...]

WARNING ● Do not leave children or adults who would normally require the assistance of others alone in your vehicle. Pets should also not be left alone. They could accidentally injure themselves or others through inadvertent operation of the vehicle. Also, on hot, sunny days, temperatures in a closed vehicle could quickly become high enough to ca[...]

c . Y ou notice a change in the sound of the exhaust system. d. Y ou have had an accident involving damage to the exhaust system, un- derbody, or rear of the vehicle. THREE-WAY CATALYST The three-way catalyst is an emission control device installed in the exhaust system. Exhaust gases in the three-way catalyst are burned at high temperatures to hel[...]

mately one minute and then remain continuously illuminated. This sequence will continue upon subsequent vehicle start-ups as long as the mal- function exists. When the malfunction indicator is illuminated, the system may not be able to detect or signal low tire pressure as intended. TPMS malfunctions may occur for a variety of reasons, including th[...]

● When a spare tire is mounted or a wheel is replaced, tire pressure will not be indicated, the TPMS will not function and the low tire pressure warning light will flash for approximately 1 minute. The light will remain on after 1 minute. Contact your NISSAN dealer as soon as possible for tire replacement and/or system resetting. ● Replacing ti[...]

OFF-ROAD RECOVERY While driving, the right side or left side wheels may unintentionally leave the road surface. If this occurs, maintain control of the vehicle by follow- ing the procedure below . Please note that this procedure is only a general guide. The vehicle must be driven as appropriate based on the con- ditions of the vehicle, road and tra[...]

DRINKING ALCOHOL/DRUGS AND DRIVING WARNING Never drive under the influence of alcohol or drugs. Alcohol in the bloodstream re- duces coordination, delays reaction time and impairs judgement. Driving after drinking alcohol increases the likelihood of being involved in an accident injuring yourself and others. Additionally, if you are injured in an a[...]

The ignition lock is designed so that the ignition switch position cannot be switched to off until the shift selector is moved to the P (Park) position. When the ignition switch cannot be switched off, proceed as follows: 1. Move the shift selector into the P (Park) position. 2. Push the ignition switch. The ignition switch position will change to [...]

If the battery of the Intelligent K ey is almost dis- charged, the guide light 䊊 A of the Intelligent K ey port blinks and the indicator appears on the ve- hicle information display . See “V ehicle informa- tion display” in the “Instruments and controls” section. In this case, inserting the Intelligent K ey into the port 䊊 B allows you [...]

2. Place the ignition switch in the OFF or L OCK position, and wait approximately 10 seconds. 3. Repeat steps 1 and 2. 4. Restart the engine while holding the device (which may have caused the interference) separate from the registered key . If the no start condition re-occurs, NISSAN rec- ommends placing the registered key on a sepa- rate key ring[...]

● When the Hybrid System is started or stopped, you may hear a sound coming from the high voltage battery located un- der the rear seats. This does not indicate a problem. ● When the Hybrid System is started or stopped, or while the vehicle is idling, you may hear a sound coming from the trans- mission. This does not indicate a prob- lem. ● W[...]

The shift selector cannot be moved out of P (Park) and into any of the other gear posi- tions if the ignition switch is pushed to the LOCK or ACC position. T o move the shift selector: Push the button while depressing the brake pedal Push the button to shift Shift without pushing button Shifting After starting the vehicle, fully depress the brake p[...]

R (Reverse) : CAUTION T o prevent transmission damage, use the P (Park) or R (Reverse) position only when the vehicle is completely stopped. Use the R (Reverse) position to back up. Make sure the vehicle is completely stopped before selecting the R (Reverse) position. The brake pedal must be depressed to move the shift selector from P (Park) , N (N[...]

T o move the shift selector, complete the following procedure: 1. Push the ignition switch to the L OCK posi- tion. 2. Apply the parking brake. 3. For cap removal it must be used or if it is available a plastic trim tool can be used 4. Using a protective cloth on the tip o fa3m m screwdriver, remove the shift lock release cover. ● If available, a[...]

T o engage: Firmly depress the parking brake. T o release: 1. Firmly apply the foot brake. 2. Move the shift selector to the P (Park) posi- tion. 3. Firmly depress the parking brake pedal and it will release. 4. Before driving, be sure the brake warning light goes out. 1. CANCEL switch 2. ACCEL/RES switch 3. COAST/SET switch 4. ON/OFF switch PRECAU[...]

T o set cruising speed, accelerate the vehicle to the desired speed, push the COAST/SET switch and release it. The SET indicator light in the instrument panel comes on. T ake your foot off the accelerator pedal. Y our vehicle maintains the set speed. ● T o pass another vehicle, depress the ac- celerator pedal. When you release the pedal, the vehi[...]

CAUTION During the first 1,200 miles (2,000 km) , follow these recommendations to obtain maximum engine performance and en- sure the future reliability and economy of your new vehicle. Failure to follow these recommendations may result in short- ened engine life and reduced engine performance. ● Do not accelerate at full throttle in any gear. ●[...]

WARNING ● Do not stop or park the vehicle over flammable materials such as dry grass, waste paper or rags. They may ignite and cause a fire. ● Safe parking procedures require that both the parking brake be set and the transmission placed into P (Park) . Fail- ure to do so could cause the vehicle to move unexpectedly or roll away and re- sult in[...]

WARNING ● If the Hybrid System is not in the READ Y mode or is turned off while driving, the power assist for the steering will not work. Steering will be harder to operate. ● When the power steering warning light illuminates with the Hybrid System in the READ Y mode, there will be no power assist for the steering. Y ou will still have control [...]

Hydraulic system The brake system has separate hydraulic circuits. If one circuit malfunctions, you will still have brak - ing at other wheels. However, the brake pedal will have to be de- pressed harder and your stopping distance will increase. The brake system warning light will also come on. Brake actuator The brake actuator uses a pump to provi[...]

ANTI-LOCK BRAKING SYSTEM (ABS) WARNING ● The Anti-lock Braking System (ABS) is a sophisticated device, but it cannot pre- vent accidents resulting from careless or dangerous driving techniques. It can help maintain vehicle control during braking on slippery surfaces. Remem- ber that stopping distances on slippery surfaces will be longer than on n[...]

Normal operation The ABS operates at speeds abov e4-6M P H( 7 - 10 km/h) . The speed varies according to road conditions. When the ABS senses that 1 or more wheels are close to locking up, the actuator rapidly applies and releases hydraulic pressure. This action is similar to pumping the brakes very quickly . Y ou may hear a noise from under the ho[...]

The V ehicle Dynamic Control (VDC) system uses various sensors to monitor driver inputs and ve- hicle motion. Under certain driving situations, the system will control braking and engine output to help keep the vehicle on its steered path. ● When the V ehicle Dynamic Control (VDC) system is operating, the SLIP indicator in the instrument panel bl[...]

FREEING A FROZEN DOOR LOCK T o prevent a door lock from freezing, apply de- icer through the key hole. If the lock becomes frozen, heat the key before inserting it into the key hole or use the remote keyless entry function on the intelligent key . ANTI-FREEZE In the winter when it is anticipated that the tem- perature will drop below 32°F (0°C) ,[...]

● Watch for slippery spots (glare ice) . These may appear on an otherwise clear road in shaded areas. If a patch of ice is seen ahead, brake before reach- ing it. T ry not to brake while on the ice, and avoid any sudden steering maneuvers. ● Do not use the cruise control on slip- pery roads. ● Snow can trap dangerous exhaust gases under your [...]

MEMO 5-26 Starting and driving[...]

6 In case of emergency Flat tire ...........................................6 - 2 Tire Pressure Monitoring System (TPMS) ..........6 - 2 Changing a flat tire .............................6 - 2 Hybrid system stops operating while driving ..........6 - 6 V ehicle does not start ..............................6 - 7 Confirm battery is discharged . .....[...]

TIRE PRESSURE MONITORING SYSTEM (TPMS) This vehicle is equipped with the Tire Pressure Monitoring System (TPMS) . It monitors tire pres- sure of all tires except the spare. When the low tire pressure warning light is lit, one or more of your tires is significantly under-inflated. If the vehicle is being driven with low tire pressure, the TPMS will [...]

WARNING ● Make sure the parking brake is securely applied and the transmission is shifted into P (Park) . ● Never change tires when the vehicle is on a slope, ice or slippery areas. This is hazardous. ● Never change tires if oncoming traffic is close to your vehicle. Wait for profes- sional road assistance. Blocking wheels Place suitable bloc[...]

T urn the clamp to remove the spare tire. Jacking up vehicle and removing the damaged tire WARNING ● Never get under the vehicle while it is supported only by the jack. If it is nec- essary to work under the vehicle, sup- port it with safety stands. ● Use only the jack provided with your vehicle to lift the vehicle. Do not use the jack provided[...]

Always refer to the proper illustrations for the correct placement and jack -up points for your specific vehicle model and jack type. Carefully read the caution label attached to the jack body and the following instruc- tions. 1. Loosen each wheel nut one or two turns by turning counterclockwise with the wheel nut wrench. Do not remove the wheel nu[...]

4. Lower the vehicle slowly until the tire touches the ground. Then, with the wheel nut wrench, tighten the wheel nuts securely in the sequence illustrated ( 䊊 A , 䊊 B , 䊊 C , 䊊 D , 䊊 E ) . Lower the vehicle completely. WARNING ● Incorrect wheel nuts or improperly tightened wheel nuts can cause the wheel to become loose or come off. Thi[...]

Before attempting to jump start the vehicle, make sure the fuel tank is not empty and the correct starting procedure is followed. See “Starting the Hybrid System” in the “Starting and driving” sec- tion. Do not drive the vehicle on battery power only if the fuel tank is empty . The high voltage battery will become discharged and the Hybrid [...]

● Keep battery out of the reach of children. ● The booster battery must be rated at 12 volts. Use of an improperly rated battery can damage your vehicle. ● Whenever working on or near a battery, always wear suitable eye protectors (for example, goggles or industrial safety spectacles) and remove rings, metal bands, or any other jewelry. Do no[...]

3. If the booster battery is in another vehicle 䊊 F , position the two vehicles, 䊊 E and 䊊 F ,t o bring their batteries near each other. Do not allow the two vehicles to touch. 4. Apply the parking brake. Move the shift se- lector to P (Park) . Switch off all unnecessary electrical systems (lights, heater, air condi- tioner, etc.) . 5. Remove[...]

WARNING Do not push start this vehicle. The three- way catalyst may be damaged. CAUTION Hybrid models cannot be push-started or tow-started. Attempting to do so may cause electrical or transmission damage. If your vehicle is overheating (indicated by the high temperature warning light) , or if you feel a lack of engine power, detect abnormal noise,[...]

6. After the engine and inverter cools down, check the coolant level in the engine and inverter coolant reservoir tank with the en- gine running. Add coolant to the engine and inverter coolant reservoir tank if necessary . Have your vehicle repaired at a NISSAN dealer. When towing your vehicle, all State (Provincial in Canada) and local regulations[...]

T OWING RECOMMENDED BY NISSAN NISSAN recommends that your vehicle be towed with the driving (front) wheels off the ground or place the vehicle on a flat bed truck as illustrated. WARNING If your vehicle needs to be towed, do it with the front wheels raised. If the front wheels are on the ground when towing, the traction motor may generate electric-[...]

● When towing hybrid vehicles with the rear wheels on the ground (if you do not use towing dollies) : Always release the parking brake. V EHICLE RECOVERY (freeing a stuck vehicle) Pulling a stuck vehicle WARNING T o avoid vehicle damage, serious per- sonal injury or death when recovering a stuck vehicle: ● Contact a professional towing service [...]

Rocking a stuck vehicle WARNING ● Stand clear of a stuck vehicle. ● Do not spin your tires at high speed. This could cause them to explode and result in serious injury. Parts of your vehicle could also overheat and be damaged. If your vehicle is stuck in sand, snow , mud, etc., use the following procedure: 1. Make sure the area in front and beh[...]

7 Appearance and care Cleaning exterior ..................................7 - 2 W ashing ......................................7 - 2 W axing ........................................7 - 2 Removing spots ................................7 - 3 Underbody ....................................7 - 3 Glass .........................................7 - 3 Alumi[...]

In order to maintain the appearance of your ve- hicle, it is important to take proper care of it. T o protect the paint surfaces, please wash your vehicle as soon as you can: ● after a rainfall to prevent possible damage from acid rain. ● after driving on coastal roads. ● when contaminants such as soot, bird drop- pings, tree sap, metal parti[...]

REMOVING SPOTS Remove tar and oil spots, industrial dust, insects, and tree sap as quickly as possible from the surface of the paint to avoid lasting damage or staining. Special cleaning products are available at a NISSAN dealer or any automotive accessory store. UNDERBODY In areas where road salt is used in winter, it is necessary to clean the und[...]

● Do not apply wheel cleaners to the wheels when they are hot. The wheel temperature should be the same as am- bient temperature. ● Rinse the wheel to completely remove the cleaner within 15 minutes after the cleaner is applied. CHROME PARTS Clean all chrome parts regularly with a non- abrasive chrome polish to maintain the finish. TIRE DRESSIN[...]

CAUTION ● Never use benzine, thinner or any simi- lar material. ● Small dirt particles can be abrasive and damaging to leather surfaces and should be removed promptly. Do not use saddle soap, car waxes, polishes, oils, cleaning fluids, solvents, deter- gents or ammonia-based cleaners as they may damage the leather’s natural finish. ● Do not[...]

Floor mat positioning aid This vehicle includes a front floor mat bracket to act as a floor mat positioning aid. NISSAN floor mats have been specially designed for your ve- hicle model. The driver’s and passenger’s side floor mats have a grommet hole incorporated in them. P osition the mat by placing the floor mat bracket hook through the floor[...]

T emperature High temperatures accelerate the rate of corro- sion to those parts which are not well ventilated. Air pollution Industrial pollution, the presence of salt in the air in coastal areas, or heavy road salt use acceler- ates the corrosion process. Road salt also accel- erates the disintegration of paint surfaces. T O PROTECT YOUR VEHICLE [...]

8 Maintenance and do-it-yourself Maintenance requirements ..........................8 - 2 General maintenance ..............................8 - 2 Explanation of general maintenance items .........8 - 2 Maintenance precautions . . .........................8 - 5 Engine compartment check locations ................8 - 7 Engine cooling system ..........[...]

T ypes of tires .................................. 8-36 Tire chains .................................... 8-37 Changing wheels and tires ..................... 8-38[...]

Y our NISSAN has been designed to have mini- mum maintenance requirements with long ser- vice intervals to save you both time and money . However, some day-to-day and regular mainte- nance is essential to maintain your NISSAN’s good mechanical condition, as well as its emis- sions and engine performance. It is the owner’s responsibility to make[...]

When driving in areas using road salt or other corrosive materials, check lubrication frequently . Lights* Clean the headlights on a regular basis. Make sure that the headlights, stop lights, tail lights, turn signal lights, and other lights are all operating properly and installed securely . Also check headlight aim. Road wheel nuts (lug nuts)* Wh[...]

Seat belts Check that all parts of the seat belt system (for example, buckles, anchors, adjusters and retractors) operate properly and smoothly , and are installed securely . Check the belt web- bing for cuts, fraying, wear or damage. Steering wheel Check for changes in the steer- ing system, such as excessive freeplay , hard steering or strange no[...]

When performing any inspection or maintenance work on your vehicle, always take care to prevent serious accidental injury to yourself or damage to the vehicle. The following are general precau- tions which should be closely observed. WARNING ● This vehicle has high voltage DC and AC systems as well as a 12-volt system. DC and AC high voltage is v[...]

● Never get under the vehicle while it is supported only by a jack. If it is neces- sary to work under the vehicle, support it with safety stands. ● Keep smoking materials, flame and sparks away from the fuel tank and battery. ● On gasoline engine models, the fuel filter or fuel lines should be serviced by a NISSAN dealer because the fuel lin[...]

1. Brake fluid reservoir 2. Engine oil filler cap 3. Air cleaner 4. Fuse/Fusible link box/Jump-start location 5. Fuse box 6. Inverter coolant reservoir 7. Engine oil dipstick 8. Radiator cap 9. Drive belt location 10. Engine coolant reservoir 11. Windshield–washer fluid reservoir LDI0577 ENGINE COMPARTMENT CHECK LOCATIONS Maintenance and do-it-yo[...]

The engine cooling system is filled at the factory with Genuine NISSAN Engine Coolant to provide year-round anti-freeze and coolant protection. The anti-freeze solution contains rust and corro- sion inhibitors. Additional engine cooling system additives are not necessary . WARNING ● Never remove the radiator or coolant reservoir cap when the engi[...]

CHANGING ENGINE COOLANT A NISSAN dealer can change the engine coolant. The service procedure can be found in the NISSAN Service Manual. Improper servicing can result in reduced heater performance and engine overheat- ing. WARNING ● T o avoid the danger of being scalded, never change the coolant when the en- gine is hot. ● Never remove the radia[...]

CHECKING INVERTER COOLANT LEVEL Check the coolant level in the reservoir when the engine and inverter are cold. If the cool- ant level is below the MIN level 䊊 B , add coolant to the MAX level 䊊 A . If the inverter cooling system frequently requires coolant, have it checked by a NISSAN dealer. CHANGING INVERTER COOLANT A NISSAN dealer can chang[...]

5. Remove the dipstick again and check the oil level. It should be between the H (High) and L (Low) marks 䊊 B . This is the normal oper- ating oil level range. If the oil level is below the L (Low) mark 䊊 A , remove the oil filler cap and pour recommended oil through the opening. Do not overfill 䊊 C . 6. Recheck oil level with the dipstick. I[...]

5. Remove the drain plug 䊊 B with a wrench by turning it counterclockwise and completely drain the oil. If the oil filter is to be changed, remove and replace it at this time. See “Changing engine oil filter” later in this section. ● Waste oil must be disposed of prop- erly. ● Check your local regulations. WARNING ● Prolonged and repeat[...]

CAUTION Be careful not to burn yourself. The engine oil may be hot. 5. Wipe the engine oil filter sealing surface with a clean rag. CAUTION Be sure to remove any old gasket material remaining on the sealing surface of the engine. Failure to do so could lead to engine damage. 6. Coat the gasket on the new filter with clean engine oil. 7. Screw on th[...]

BRAKE FLUID Check the brake fluid level in the reservoir. If the fluid level is below the MIN line or the brake warning light comes on, add Genuine NISSAN Super Heavy Duty Brake Fluid or equivalent DO T 3 fluid up to the MAX line. If fluid must be added frequently , the system should be checked by a NISSAN dealer. WINDSHIELD–WASHER FLUID RESERVOI[...]

The 12-volt battery is located on the right hand side of the trunk behind an access panel. ● K eep the battery surface clean and dry . Clean the battery with a solution of baking soda and water. ● Make certain the terminal connections are clean and securely tightened. ● If the vehicle is not to be used for 30 days or longer, disconnect the ne[...]

2. Have the belt checked regularly for condi- tion and tension in accordance with the maintenance schedule found in the “NISSAN Service and Maintenance Guide” . REPLACING SPARK PLUGS Iridium-tipped spark plugs It is not necessary to replace iridium-tipped 䊊 A spark plugs as frequently as conventional type spark plugs because they last much lo[...]

The air cleaner filter should not be cleaned and reused. Replace it according to the maintenance log shown in the “NISSAN Service and Mainte- nance Guide.” When replacing the filter, wipe the inside of the air cleaner filter housing and the cover with a damp cloth. T o remove the air cleaner filter, push the tabs and pull the unit upward. WARNI[...]

REPLACING Replace the wiper blades if they are worn. 1. Lift the wiper arm away from the windshield. 䊊 2 Push the release tab, then move the wiper blade down the wiper arm to remove. 䊊 3 Remove the wiper blade. 4. Insert the new wiper blade onto the wiper arm until it clicks into place. 5. Rotate wiper blade so the dimple is in the groove. 6. R[...]

If the brakes do not operate properly , have the brakes checked by a NISSAN dealer. SELF-ADJUSTING BRAKES Y our vehicle is equipped with self-adjusting brakes. The front and rear disc-type brakes self-adjust every time the brake pedal is applied. WARNING See a NISSAN dealer for a brake system check if the brake pedal height does not return to norma[...]

If a type A fuse is used to replace a type B fuse, the type A fuse will not be level with the fuse pocket as shown in the illustration. This will not affect the performance of the fuse. Make sure the fuse is installed in the fuse box securely . T ype B fuses cannot be installed in the under- hood fuse boxes. Only use type A fuses in the underhood f[...]

6. If the fuse is open 䊊 A , replace it with a new fuse 䊊 B . 7. If a new fuse also opens, have the electrical system checked and repaired by a NISSAN dealer. Fusible links If the electrical equipment does not operate and fuses are in good condition, check the fusible links. If any of these fusible links are melted, replace with only genuine NI[...]

PASSENGER COMPARTMENT CAUTION Never use a fuse of a higher or lower amperage rating than specified on the fuse box cover. This could damage the electrical system or cause a fire. If any electrical equipment does not operate, check for an open fuse. 1. Be sure the ignition switch and the headlight switch are OFF . 2. Pull the fuse box cover to remov[...]

CAUTION Be careful not to allow children to swallow the battery or removed parts. NISSAN INTELLIGENT K EY™ Replace the battery in the Intelligent K ey as fol- lows: 1. Remove the mechanical key from the Intelli- gent K ey . 2. Insert a small screwdriver 䊊 A into the slit 䊊 B of the corner and twist it to separate the upper part from the lower[...]

4. Close the lid securely as illustrated 䊊 C 䊊 D . 5. Operate the buttons to check the operation. See a NISSAN dealer if you need assistance for replacement. FCC Notice: Changes or modifications not expressly ap- proved by the party responsible for compli- ance could void the user’s authority to op- erate the equipment. This device complies w[...]

● Use the same number and wattage as shown in the chart. Fog may temporarily form inside the lens of the exterior lights in the rain or in a car wash. A temperature difference between the inside and the outside of the lens causes the fog. This is not a malfunction. If large drops of water collect inside the lens, contact a NISSAN dealer. FRONT PA[...]

1. Rear map light 2. Front map light 3. Step light 4. Headlamp assembly 5. High-mount stoplight (if so equipped) 6. T runk light 7. Spoiler mounted stoplight (if so equipped) 8. Rear combination light 9. License plate light WDI0722 8-26 Maintenance and do-it-yourself[...]

Replacement procedures All other lights are either type A , B, C or D. When replacing a bulb, first remove the lens, lamp and/or cover. Indicates bulb removal Indicates bulb installation Use a cloth 䊊 1 to protect the light housing. WDI0263 V anity mirror light WDI0340 Maintenance and do-it-yourself 8-27[...]

Use a cloth 䊊 1 to protect the light housing. Use a cloth to protect the light housing. Use a cloth 䊊 1 to protect the light housing. Step light LDI0341 Front map light WDI0723 Personal light WDI0585 8-28 Maintenance and do-it-yourself[...]

If you have a flat tire, see “Flat tire” in the “In case of emergency” section of this manual. TIRE PRESSURE Tire Pressure Monitoring System (TPMS) This vehicle is equipped with the Tire Pressure Monitoring System (TPMS) . It monitors tire pressure of all tires except the spare. When the low tire pressure warning light is lit, one or more o[...]

Tire inflation pressure Check the tire pressures (including the spare) often and always prior to long dis- tance trips. The recommended tire pres- sure specifications are shown on the F .M.V .S.S./C.M.V .S.S. certification label or the Tire and Loading Information label under the “Cold Tire Pressure” heading. The Tire and Loading Information la[...]

Tire and loading information label 䊊 1 Seating capacity: The maximum num- ber of occupants that can be seated in the vehicle. 䊊 2 V ehicle load limit: See “V ehicle load- ing information” in the “T echnical and consumer information” section. 䊊 3 Original tire size: The size of the tires originally installed on the vehicle at the facto[...]

Checking tire pressure 1. Remove the valve stem cap from the tire. 2. Press the pressure gauge squarely onto the valve stem. Do not press too hard or force the valve stem side- ways, or air will escape. If the hissing sound of air escaping from the tire is heard while checking the pressure, reposition the gauge to eliminate this leakage. 3. Remove [...]

Size Cold Tire Inflation Pres- sure Front and Rear Original Tire P215/60/R16 240 kPa, 35 PSI Spare Tire T135/90R16 420 kPa, 60 PSI TIRE LABELING Federal law requires tire manufacturers to place standardized information on the sidewall of all tires. This information iden- tifies and describes the fundamental characteristics of the tire and also pro-[...]

䊊 1 Tire size (example: P215/65R15 95H) 1. P: The “P” indicates the tire is de- signed for passenger vehicles (not all tires have this information) . 2. Three-digit number (215): This num- ber gives the width in millimeters of the tire from sidewall edge to side- wall edge. 3. T wo-digit number (65): This number, known as the aspect ratio, gi[...]

䊊 2 TIN (Tire Identification Number) for a new tire (example: DO T XX XX XXX XXXX) 1. DO T : Abbreviation for the “Depart- ment Of T ransportation”. The symbol can be placed above, below or to the left or right of the Tire Identification Number. 2. T wo-digit code: Manufacturer’s identification mark. 3. T wo-digit code: Tire size. 4. Three-[...]

䊊 7 The word “radial” The word “radial” is shown if the tire has radial structure. 䊊 8 Manufacturer or brand name Manufacturer or brand name is shown. Other Tire-related T erminology In addition to the many terms that are defined throughout this section, Intended Outboard Sidewall is (1) the sidewall that contains a whitewall, bears whi[...]

studded tires. Skid and traction capabilities of studded snow tires on wet or dry surfaces may be poorer than that of non-studded snow tires. TIRE CHAINS CAUTION Only certain SAE class “S” tire chains can be used on this vehicle. Using the wrong Class “S” chains on this vehicle will cause damage to the vehicle. If you plan to use tire chain[...]

CHANGING WHEELS AND TIRES Tire rotation NISSAN recommends rotating the tires every 7,500 miles (12,000 km) . See “Flat tire” in the “In case of emer- gency” section of this manual for tire re- placing procedures. As soon as possible, tighten the wheel nuts to the specified torque with a torque wrench. Wheel nut tightening torque: 83 ft-lb ([...]

● The original tires have built-in tread wear indicators. When the wear indicators are visible, the tire(s) should be replaced. ● Tires degrade with age and use. Have tires, including the spare, over 6 years old checked by a qualified technician because some tire damage may not be ob- vious. Replace the tires as neces- sary to prevent tire fail[...]

● Do not install a damaged or deformed wheel or tire even if it has been re- paired. Such wheels or tires could have structural damage and could fail with- out warning. ● The use of retread tires is not recommended. ● For additional information regarding tires, refer to “Important Tire Safety In- formation” (US) or “Tire Safety Informa-[...]

● When driving on roads covered with snow or ice, the TEMPORAR Y USE ONL Y spare tire should be used on the rear wheels and the original tire used on the front wheels (drive wheels) . Use tire chains only on the front (original) tires. ● Tire tread of the TEMPORAR Y USE ONL Y spare tire will wear at a faster rate than the standard tire. Replace[...]

MEMO 8-42 Maintenance and do-it-yourself[...]

9 T echnical and consumer information Capacities and recommended fuel/lubricants .........9 - 2 Fuel recommendation . . .........................9 - 3 Engine oil and oil filter recommendations ..........9 - 5 Air conditioner system refrigerant and oil recommendations ..............................9 - 6 Specifications ...............................[...]

The following are approximate capacities. The actual refill capacities may be slightly different. When refilling, follow the procedure described in the “Maintenance and do-it-yourself” section to determine the proper refill capacity. Capacity (Approximate) Recommended Fluids and Lubricants US measure Imp measure Liter Fuel 20 gal 16-5/8 gal 75.[...]

FUEL RECOMMENDATION Use unleaded regular gasoline with an octane rating of at least 87 AKI (Anti-Knock Index) num- ber (Research octane number 91) . CAUTION ● Using a fuel other than that specified could adversely affect the emission control system, and may also affect the warranty coverage. ● Under no circumstances should a leaded gasoline be [...]

E–85 fuel E-85 fuel is a mixture of approximately 85% fuel ethanol and 15% unleaded gasoline. E-85 can only be used in a Flexible Fuel V ehicle (FFV) . Do not use E-85 in your vehicle. U.S. government regulations require fuel ethanol dispensing pumps to be identified by a small, square, orange and black label with the common abbreviation or the a[...]

ENGINE OIL AND OIL FILTER RECOMMENDATIONS Selecting the correct oil It is essential to choose the correct grade, quality and viscosity engine oil to ensure satisfactory engine life and performance. See “Capacities and recommended fuel/lubricants” earlier in this section. NISSAN recommends the use of an energy conserving oil in order to improve [...]

Y our engine was filled with a high-quality engine oil when it was built. Y ou do not have to change the oil before the first recommended change interval. Oil and filter change intervals depend upon how you use your vehicle. Operation under the following conditions may require more frequent oil and filter changes: ● repeated short distance drivin[...]

ENGINE Model QR25DE T ype Gasoline, 4-cycle, DOHC Cylinder arrangement 4-cylinder in-line Bore x Stroke in (mm) 3.5 x 3.9 (89.0 x 100.0) Displacement cu in (cm 3 ) 151.82 (2,488) Firing order 1–3–4–2 Idle speed eCVT (in “N” position) No adjustment is necessary. Ignition timing (degree B.T .D.C. at idle speed) CO % at idle Spark plug DILKA[...]

WHEELS AND TIRES Wheel type Size Offset in (mm) Aluminum 16 x 7JJ 1.77 (45) T type (Spare) 16 x 4T 1.57 (40) Tire size P215/60R16 Spare tire T135/90R16 DIMENSIONS AND WEIGHTS Overall length in (mm) 190.7 (4,844) Overall width in (mm) 70.7(1,795.7) Overall height in (mm) 58.3 (1,481) Front track in (mm) 61.4 (1,560) Rear track in (mm) 61.2 (1,555) W[...]

When planning to drive your NISSAN ve- hicle in another country, you should first find out if the fuel available is suitable for your vehi- cle’s engine. Using fuel with an octane rating that is too low may cause engine damage. All gasoline vehicles must be operated with unleaded gasoline. There- fore, avoid taking your vehicle to areas where app[...]

ENGINE SERIAL NUMBER The number is stamped on the engine as shown. F .M.V .S.S./C.M.V .S.S. CERTIFICATION LABEL The Federal/Canadian Motor V ehicle Safety Standard (F .M.V .S.S./C.M.V .S.S.) certification la- bel is affixed as shown. This label contains valu- able vehicle information, such as: Gross V ehicle W eight Ratings (GVWR) , Gross Axle Weig[...]

TIRE AND LOADING INFORMATION LABEL The cold tire pressure is shown on the Tire and Loading Information label. The label is located as shown. AIR CONDITIONER SPECIFICATION LABEL The air conditioner specification label is affixed to the underside of the hood as shown. WTI0174 WTI0178 WTI0179 INSTALLING FRONT LICENSE PLATE T echnical and consumer info[...]

Use the following steps to mount the front license plate: 䊊 1 Make a shallow hole in each plastic finisher at the location mark (small dimple) using a 0.39 in (10 mm) drill. T o avoid damaging the threads behind the finisher, apply only light pressure to the drill. 䊊 2 Mount the license plate bracket using two 10 mm slotted Phillip head screws.[...]

● V ehicle Capacity Weight, Load limit, T otal load capacity - maximum total weight limit specified of the load (passengers and cargo) for the ve- hicle. This is the maximum combined weight of occupants and cargo that can be loaded into the vehicle. If the vehicle is used to tow a trailer, the trailer tongue weight must be in- cluded as part of t[...]

Steps for determining correct load limit 1. Locate the statement “The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs” on your vehicle’s placard. 2. Determine the combined weight of the driver and passengers that will be riding in your vehicle. 3. Subtract the combined weight of the driver and passengers from XXX [...]

5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4. 6. If your vehicle will be towing a trailer, load from your trailer will be trans- ferred to your vehicle. Consult this manual to determine how this re- duces the av[...]

WARNING Overloading or improper loading of a trailer and its cargo can adversely affect vehicle handling, braking and perfor- mance and may lead to accidents. CAUTION ● Do not tow a trailer or haul a heavy load for the first 500 miles (800 km) . Y our engine, axle or other parts could be damaged. ● For the first 500 miles (800 km) that you tow [...]

T emperature conditions can also affect towing. For example, towing a heavy trailer in high outside temperatures on graded roads can affect engine performance and cause overheating. The engine protection mode, which helps reduce the chance of engine damage, could activate and automati- cally decrease engine power. V ehicle speed may decrease under [...]

T owing capacities are calculated assuming a base vehicle with driver and any options required to achieve the rating. Additional passengers, cargo and/or optional equipment, such as the trailer hitch, will add weight to the vehicle and reduce your vehicle’s maximum towing capacity and trailer tongue load. The vehicle and trailer need to be weighe[...]

Always verify that available capacities are within the required ratings. T OWING LOAD/SPECIFICATION T OWING LOAD / SPECIFICA TION UNIT : lb (kg) MAXIMUM T OWING L OAD 1,000 (454) MAXIMUM T ONGUE L OAD 100 (45) T OWING SAFETY T railer hitch Choose a proper hitch for your vehicle and trailer. Make sure the trailer hitch is securely attached to the ve[...]

CAUTION ● Do not use axle-mounted hitches. ● The hitch should not be attached to or affect the operation of the impact- absorbing bumper. ● Do not modify the vehicle exhaust sys- tem, brake system, etc . to install a trailer hitch. ● T o reduce the possibility of additional damage if your vehicle is struck from the rear, where practical, re[...]

WARNING Never connect a trailer brake system di- rectly to the vehicle brake system. Pre-towing tips ● Be certain your vehicle maintains a level position when a loaded and/or unloaded trailer is hitched. Do not drive the vehicle if it has an abnormal nose-up or nose-down condition; check for improper tongue load, overload, worn suspension or othe[...]

T o drive away: 1. Start the vehicle. 2. Apply and hold the brake pedal. 3. Shift the transmission into gear. 4. Release the parking brake. 5. Drive slowly until the vehicle and trailer are clear from the blocks. 6. Apply and hold the brake pedal. 7. Have someone retrieve and store the blocks. ● While going downhill, the weight of the trailer pus[...]

● Some states or provinces have specific regulations and speed limits for vehicles that are towing trailers. Obey the local speed limits. ● Check your hitch, trailer wiring harness con- nections, and trailer wheel lug nuts after 50 miles (80 km) of travel and at every break. ● When launching a boat, don’t allow the wa- ter level to go over [...]

WARNING The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction characteristic s. T emperature A , B and C The temperature grades are A (the highest) , B, and C, representing the tire’s resistance to the generation of heat, and its abi[...]

If you believe that your vehicle has a de- fect which could cause a crash or could cause injury or death, you should immedi- ately inform the National Highway T raffic Safety Administration (NHTSA) in addi- tion to notifying NISSAN. If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a [...]

the type of personally identifying data routinely acquired during a crash investigation. T o read data recorded by an EDR, special equip- ment is required and access to the vehicle or the EDR is needed. In addition to the vehicle manu- facturer and NISSAN dealer, other parties, such as law enforcement, that have the special equip- ment, can read th[...]

Insist on the use of genuine NISSAN collision parts! If you want your vehicle to be restored using parts made to NISSAN’s original exacting specifica- tions – if you want to help it to last and hold its resale value, the solution is simple. T ell your insurance agent and your repair shop to only use Genuine NISSAN Collision Parts. NISSAN does n[...]

MEMO 9-28 T echnical and consumer information[...]

10 Index 12-volt battery ................ .8-15 A Air bag (See supplemental restraint system) .... .1-34 Air bag system Front (See supplemental front impact air bag system) .............. .1-42 Air bag warning light .......... .1-49, 2-15 Air cleaner housing filter ........... .8-17 Air conditioner Air conditioner service .......... .4-22 Air condi[...]

Precautions on child restraints ........ .1-17, 1-23, 1-28, 1-31 T op tether strap anchor point locations . .1-21 Child safety rear door lock ........... .3-6 Chimes, audible reminders .......... .2-17 Cleaning exterior and interior .......... .7-2 Clock .................. .4-39, 4-44 (models with navigation system) ...... .4-8 (models without navi[...]

Engine oil .................. .8-10 Inverter coolant ............... .8-9 F .M.V .S.S. certification label .......... .9-10 Front air bag system (See supplemental restraint system) ..... .1-42 Front seats .................... .1-2 Fuel Capacities and recommended fuel/lubricants ................ .9-2 Fuel economy ............... .5-17 Fuel gauge ...[...]

L Labels Air conditioner specification label .... .9-11 C.M.V .S.S. certification label ....... .9-10 Emission control information label .... .9-10 Engine serial number ........... .9-10 F .M.V .S.S. certification label ........ .9-10 Tire and Loading Information label .... .9-11 V ehicle identification number (VIN) plate . .9-9 W arning labels (fo[...]

P Parking Parking brake operation .......... .5-14 Parking/parking on hills .......... .5-18 Personal lights ................. .2-46 Phone, Bluetooth 姞 hands-free system ................. .4-86, 4-101 Power Power door locks .............. .3-5 Power outlet ................ .2-34 Power rear windows ............ .2-41 Power steering system ........[...]

Sunroof ..................... .2-43 Sunroof (see Moonroof) ............ .2-43 Supplemental air bag warning light . . .1-49, 2-15 Supplemental front impact air bag system . . .1-42 Supplemental restraint system Information and warning labels ...... .1-48 Precautions on supplemental restraint system ................... .1-34 Supplemental restraint sy[...]

Passenger air bag and status light .... .1-43 Seat belt warning light ........... .2-14 V ehicle security system .......... .2-25 W arning labels (for SRS) ......... .1-48 W arning/indicator lights and audible reminders .................. .2-9 W arning lights .................. .2-9 W asher switch Windshield wiper and washer switch . . .2-28 W eigh[...]

RECOMMENDED FUEL: Use unleaded regular gasoline with an octane rating of at least 87 AKI (Anti-Knock Index) num- ber (Research octane number 91) . CAUTION ● Using a fuel other than that specified could adversely affect the emission control system, and may also affect the warranty coverage. ● Under no circumstances should a leaded gasoline be us[...]

2010 N I S S AN AL TI MA HYB R I D 2010 A L T IM A H Y BRID OWN E R'S MAN UAL HL3 2-D Printing : September 2009 (05) Publication No.: OM0E-HL3 2U0 Printed in U.S.A. F or your saf et y , r ead car efully and k eep in this vehicle. HL3 2-D[...]