Nissan Quest (2015) manual

® 2015 QU ES T OWN E R’S MAN UAL For y our safety , read car efully and keep in this v ehicle. 2015 N I S SAN QU E S T E52-D E52-D Printing : August 2014 (14) Publication No.: OM0E 0L32U2 Printed in U .S.A. T O OU M-1JA4D OM15E0 0E52U0 I n f o r m a t i o n P r o v i d e d b y :[...]

Welcome to the growing family of new NISSAN owners. This vehicle is delivered to you with confidence. It was produced using the latest techniques and strict quality control. This manual was prepared to help you under- stand the operation and maintenance of your vehicle so that you may enjoy many miles of driving pleasure. Please read through this m[...]

I n f o r m a t i o n P r o v i d e d b y :[...]

WHEN READING THE MANUAL This manual includes information for all features and equipment available on this model. Features and equipment in your vehicle may vary depending on model, trim level, options selected, order, date of production, region or availability. There- fore, you may find information about features or equipment that are not in- clude[...]

above call attention to an item in the illustration. CALIFORNIA PROPOSIT ION 65 W ARNING WARNING Engine exhaust, some of its constitu- ents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. In addition, certain fluids con- tained in vehicles and c[...]

NISSAN CARES ... Both NISSAN and your NISSAN dealer are dedicated to serving all your automotive needs. Y our satisfaction with your vehicle and your NISSAN dealer are our primary concerns. Y our NISSAN dealer is always available to assist you with all your automobile sales and service needs. We appreciate your interest in NISSAN and thank you for [...]

I n f o r m a t i o n P r o v i d e d b y :[...]

Illustrated table of contents 0 Safety — Seats, seat belts and supplemental restraint system 1 Instruments and controls Pre-driving checks and adjustments Monitor, heater, air conditioner, audio, phone and voice recognition systems Starting and driving In case of emergency Appearance and care Maintenance and do-it-yourself T echnical and consumer[...]

I n f o r m a t i o n P r o v i d e d b y :[...]

0 Illustrated table of contents Seats, seat belts and supplemental restraint system (SRS) ............................................................................. 0-2 Exterior front ............................................................................... 0-3 Exterior rear .................................................................[...]

0-2 Illustrated table of contents SSI0820 1. Non-adjustable head restraints/headrests (Page 1-10) 2. Child restraint anchor points (for top tether strap child restraint) (P .1-31) 3. Seat belt for 3rd row center seat (P .1-20) 4. Seat belts (P .1-15) 5. Roof-mounted curtain side-impact supplemental air bags (P .1-48) 6. Adjustable head restraints ([...]

JVO0058X 1. Front view camera* (P .4-31) 2. Hood (P .3-25) 3. Windshield wiper and washer — Switch operation (P .2-30) — Blade replacement (P .8-17) — Window washer fluid (P .8-13) 4. Moonroof* (P .2-53) 5. Outside mirrors (P .3-35) - Side view camera* (P .4-31) 6. Power windows (P .2-51) 7. Side turn signal light* — Switch operation (P .2-[...]

0-4 Illustrated table of contents SSI0822 1. Antenna (P .4-104) — Satellite radio antenna* (P .4-104) 2. Rear window wiper and washer — Switch operation (P .2-31) — Window washer fluid (P .8-13) 3. High-mounted stop light — Bulb replacement (P .8-27) 4. Rear window defroster (P .2-32) 5. Fuel-filler door — Operation (P .3-30) — Fuel inf[...]

JVC0701X 1. Rear personal light (P .2-56) 2. Coat hooks (P .2-50) 3. Heater/Air conditioner rear controller* (P .4-42) 4. Mobile Entertainment System (MES)* (P .4-104) 5. Door armrest — Power window switch (P .2-51) — Power door lock switch (P.3-6) — Outside mirror remote control switch (P .3-35) 6. Automatic drive positioner switch* (P .3-36[...]

0-6 Illustrated table of contents SSI0825 1. V ehicle Dynamic Control (VDC) OFF switch (P .2-41) 2. Blind Spot W arning (BSW) switch* (P .2-40) — Blind Spot W arning (BSW)* (P .5-17) 3. Sliding door switch* (driver’s side) (P .3-10) 4. Sliding door switch* (passenger’s side) (P .3-10) 5. Instrument brightness control switch (P.2-37) 6. Power [...]

SSI0824 1. Side ventilator (P .4-41) 2. Meters and gauges (P .2-5) 3. Push-button ignition switch (P .5-8) 4. Hazard warning flasher switch (P .6-2) 5. Shift lever (P .5-13) 6. Center display — Center color display* (P .4-4) — Navigation system** 7. Center multi-function control panel* (P .4-4) — Navigation system** — V ehicle information a[...]

0-8 Illustrated table of contents JVC0210X 1. Instrument brightness control switch (P.2-37) 2. T achometer (P .2-7) 3. Speedometer (P .2-6) 4. Fuel gauge (P .2-8) 5. Warning/indicator lights (P .2-11) 6. T rip computer switch (P .2-23) 7. V ehicle information display (P .2-18) — T rip computer (P .2-23) 8. Engine coolant temperature gauge (P.2-7)[...]

SDI2715 VQ35DE ENGINE 1. Power steering fluid reservoir (P .8-11) 2. Drive belt location (P .8-15) 3. Engine oil filler cap (P .8-8) 4. Brake fluid reservoir (P .8-12) 5. Air cleaner (P .8-17) 6. Fuse/fusible link holder (P .8-21) 7. Window washer fluid reservoir (P .8-13) 8. Engine coolant reservoir (P .8-7) 9. Radiator filler cap (P .8-7) 10. Eng[...]

0-10 Illustrated table of contents Warning light Name Page Anti-lock Braking System (ABS) warning light 2-12 Blind Spot W arning (BSW) system warning light (if so equipped) 2-12 Brake warning light 2-12 Charge warning light 2-13 Engine oil pressure warning light 2-13 Hydraulic pump electric power steering warning light 2-13 Intelligent Key system w[...]

1 Safety — Seats, seat belts and supplemental restraint system Seats ............................................................................................ 1-2 Front seats ............................................................................ 1-3 2nd row seats ...................................................................... 1-6 [...]

1-2 Safety — Seats, seat belts and supplemental restraint system SSS0133 WARNING . Do not ride in a moving vehicle when the seatback is reclined. This can be dangerous. The shoulder belt will not be against your body. In an accident, you could be thrown into it and receive neck or other serious injuries. Y ou could also slide under the lap belt a[...]

SSS0792 FRONT SEA TS Front manual seat adjustment Forward and backward: Pull the lever * 1 up and hold it while you slide the seat forward or backward to the desired position. Release the lever to lock the seat in position. Reclining: T o recline the seatback, pull the lever * 2 up and lean back. T o bring the seatback forward, pull the lever up an[...]

1-4 Safety — Seats, seat belts and supplemental restraint system seat position memory function (if so equipped) . CAUTION When adjusting the seat positions, be sure not to contact any moving parts to avoid possible injuries and/or da- mages. SSS1051 Forward and backward: Moving the switch * 1 forward or backward will slide the seat forward or bac[...]

SSS1052 Seat lifter (if so equipped) : 1. Pull up or push down the adjusting switch to adjust the seat height until the desired position is achieved. 2. Tilt up or down the adjusting switch to adjust the front angle of the seat until the desired position is achieved (for driver’s seat) . SSS1053 Lumbar support (if so equipped) : The lumbar suppor[...]

1-6 Safety — Seats, seat belts and supplemental restraint system SSS1158 2ND ROW SEA TS Seat adjustment WARNING . The 2nd row seats are heavy. Be careful when folding and unfolding. . T o avoid injury to yourself and others, keep hands and body clear when folding. Forward and backward: Pull the lever * 1 up and hold it while you slide the seat fo[...]

SSS1149 3RD ROW SEA TS Reclining Pull the strap on the seatback * A and lean back. Release the strap at the desired angle. The reclining feature allows adjustment of the seatback for occupants of different sizes to help obtain proper seat belt fit. (See “Precautions on seat belt usage” (P .1-15) .) The seatback may also be reclined to allow occ[...]

1-8 Safety — Seats, seat belts and supplemental restraint system SSS1162 The armrest angle can be adjusted freely. * 1 Pull the armrest between * A and * B . * 2 Pull it down to * C . * 3 Pull up the armrest slowly, it can be secured between * B and * C . FLEXIBLE SEA TING WARNING . Never allow anyone to ride in the cargo area or on the rear seat[...]

SSS1163 Folding the 2nd row seats Before folding the rear seats: Secure the seat belts on the seat belt hooks on the side wall. (See “Seat belt hooks” (P .1-23) .) T o fold down the seatbacks: Pull the lever on the 2nd row seat. T o return the seatbacks: Lift up each seatback and push it to the upright position until it is latched. CAUTION When[...]

1-10 Safety — Seats, seat belts and supplemental restraint system Manual folding: Pull the strap on the seatback * A or on the back side of the seatback * B and fold the seatback. SSS1151 Power folding (if so equipped) : Push the front side of the switch * A located on the right side or left side of the cargo area. The corresponding 3rd row seatb[...]

JVR0269X The illustration shows the seating positions equipped with head restraint/headrest. Indicates the seating position is equipped with a head restraint. Indicates the seating position is equipped with a headrest. + indicates the seating position is not equipped with a head restraint or headrest. (if applicable) . Y our vehicle is equipped wit[...]

1-12 Safety — Seats, seat belts and supplemental restraint system JVR0203X NON-ADJUST ABLE HEAD RE- STRAINT/HEADREST COMPONENTS 1. Removable head restraint/headrest 2. Single notch 3. Lock knob 4. Stalks SSS1037 REMOVE Use the following procedure to remove the head restraint/headrest. 1. Pull the head restraint/headrest up to the highest position[...]

SSS0997 ADJUST For adjustable head restraint/headrest Adjust the head restraint/headrest so the center is level with the center of your ears. If your ear position is still higher than the recommended alignment, place the head restraint/headrest at the highest position. JVR0259X For non-adjustable head restraint/head- rest Make sure the head restrai[...]

1-14 Safety — Seats, seat belts and supplemental restraint system SSS1036 Lower T o lower, push and hold the lock knob and push the head restraint/headrest down. Make sure the head restraint/headrest is posi- tioned so the lock knob is engaged in the notch before riding in that designated seating position. SSS0508 FRONT -SEA T ACTIVE HEAD RE- STR[...]

PRECAUTIONS ON SEA T BEL T USAGE If you are wearing your seat belt properly adjusted, and you are sitting upright and well back in your seat with both feet on the floor, your chances of being injured or killed in an accident and/or the severity of injury may be greatly reduced. NISSAN strongly encourages you and all of your passengers to buckle up [...]

1-16 Safety — Seats, seat belts and supplemental restraint system WARNING . Every person who drives or rides in this vehicle should use a seat belt at all times. Children should be prop- erly restrained in the rear seat and, if appropriate, in a child restraint. . The seat belt should be properly adjusted to a snug fit. Failure to do so may reduc[...]

commendations. The child restraints should be replaced if they are damaged. SSS0016 SSS0014 PREGNANT WOMEN NISSAN recommends that pregnant women use seat belts. The seat belt should be worn snug, and always position the lap belt as low as possible around the hips, not the waist, and place the shoulder belt over your shoulder and across your chest. [...]

1-18 Safety — Seats, seat belts and supplemental restraint system internal injuries. . For the most effective protection when the vehicle is in motion, the seat should be upright. Always sit well back in the seat with both feet on the floor and adjust the seat belt properly. JVR0183X WARNING Do not allow children to play with the seat belts. Most[...]

SSS0292 Fastening the seat belts 1. Adjust the seat. (See “Seats” (P .1-2) .) 2. Slowly pull the seat belt out of the retractor and insert the tongue into the buckle until you hear and feel the latch engage. . The retractor is designed to lock during a sudden stop or on impact. A slow pulling motion permits the belt to move, and allows you some[...]

1-20 Safety — Seats, seat belts and supplemental restraint system SSS0326 Unfastening the seat belts T o unfasten the seat belt, push the button on the buckle. The seat belt automatically retracts. Checking seat belt operation Seat belt retractors are designed to lock seat belt movement by two separate methods: . When the belt is pulled quickly f[...]

SSS0241 WARNING . Always fasten the connector tongue and the seat belt in the order shown. . Always make sure both the connec- tor tongue and the seat belt tongue are secured when using the seat belt or installing a child restraint. Do not use the seat belt or child restraint with only the seat belt tongue attached. This could result in serious per[...]

1-22 Safety — Seats, seat belts and supplemental restraint system SSS1165 Attaching 3rd row center seat belt: Always be sure the 3rd row center seat belt connector tongue and connector buckle are attached. Disconnect only when folding down the 3rd row seat. T o connect the buckle: 1. Pull out the connector tongue from the retractor base * 1 . 2. [...]

SSS0351A Shoulder belt height adjustment (if so equipped) The shoulder belt anchor height should be adjusted to the position best for you. (See “Precautions on seat belt usage” (P .1-15) .) T o adjust, pull the adjustment button * 1 , and then move the shoulder belt anchor to the desired position * 2 , so that the belt passes over the center of[...]

1-24 Safety — Seats, seat belts and supplemental restraint system purchasing an extender if an extender is required. WARNING . Only NISSAN seat belt extenders, made by the same company which made the original equipment seat belts, should be used with the NISSAN seat belts. . Adults and children who can use the standard seat belt should not use an[...]

tongue may also be released. Release the connector tongue * 1 by inserting a suitable tool (such as a key) into the connector buckle * A . If the seat belt cannot be unbuckled or is already unbuckled, release the child by cutting the seat belt with a suitable tool (such as a knife or scissors) to release the seat belt. Children need adults to help [...]

[...]

PRECAUTIONS ON CHILD RE- STRAINTS WARNING . Failure to follow the warnings and instructions for proper use and in- stallation of child restraints could result in serious injury or death of a child or other passengers in a sudden stop or collision: — The child restraint must be used and installed properly. Always follow all of the child restraint [...]

1-28 Safety — Seats, seat belts and supplemental restraint system For details, see “Lower Anchors and T ethers for CHildren System (LA TCH)” (P .1-28) . If you do not have a LA T CH compatible child restraint, the vehicle seat belts can be used. Several manufacturers offer child restraints for infants and small children of various sizes. When[...]

child restraint manufacturer’s instructions for installation. The LA TCH anchor points are provided to install child restraints in the following positions only: . 2nd row seats . 3rd row seat (for the right outboard seat only) LA T CH lower anchor WARNING Failure to follow the warnings and instructions for proper use and installa- tion of child r[...]

1-30 Safety — Seats, seat belts and supplemental restraint system SSS1167 2nd row seats SSS1177 3rd row seat SSS0643 LA TCH webbing-mounted attachment Installing child restraint LA T CH lower anchor attachments LA TCH compatible child restraints include two rigid or webbing-mounted attachments that can be connected to two anchors located at certa[...]

SSS1088 2nd row seat JVR0408X 3rd row seat T OP TETHER STRAP CHILD RE- STRAINT If the manufacturer of your child restraint requires the use of a top tether strap, it must be secured to an anchor point. WARNING . In the 3rd row seat, a child restraint with a top tether strap can only be used in the center and right out- board seating position. Do no[...]

1-32 Safety — Seats, seat belts and supplemental restraint system REAR-F ACING CHILD RESTRAINT IN- ST ALLA TION USING LA T CH Refer to all Warnings and Cautions in the “Child safety” and “Child restraints” sections before installing a child restraint. Do not use the lower anchors if the combined weight of the child and the child restraint[...]

SSS0639 Rear-facing — step 3 3. For child restraints that are equipped with webbing-mounted attachments, remove any additional slack from the anchor attach- ments. Press downward and rearward firmly in the center of the child restraint with your hand to compress the vehicle seat cushion and seatback while tightening the webbing of the anchor atta[...]

1-34 Safety — Seats, seat belts and supplemental restraint system SSS0100 REAR-F ACING CHILD RESTRAINT IN- ST ALLA TION USING THE SEA T BEL TS WARNING . The three-point seat belt with Auto- matic Locking Retractor (ALR) must be used when installing a child restraint. Failure to use the ALR mode will result in the child re- straint not being prope[...]

seats: 1. Child restraints for infants must be used in the rear-facing direction and therefore must not be used in the front seat. Position the child restraint on the seat. Always follow the restraint manufacturer’s instructions. SSS0654 Rear-facing — step 2 2. Route the seat belt tongue through the child restraint and insert it into the buckle[...]

1-36 Safety — Seats, seat belts and supplemental restraint system SSS0656 Rear-facing — step 4 4. Allow the seat belt to retract. Pull up on the shoulder belt to remove any slack in the belt. SSS0657 Rear-facing — step 5 5. Remove any additional slack from the seat belt; press downward and rearward firmly in the center of the child restraint [...]

seat belt is not locked, repeat steps 1 through 6. After the child restraint is removed and the seat belt fully retracted, the ALR mode (child restraint mode) is canceled. FORW ARD-FACING CHILD RE- STRAINT INST ALLA TION USING LA T CH Refer to all Warnings and Cautions in the “Child safety” and “Child restraints” sections before installing [...]

1-38 Safety — Seats, seat belts and supplemental restraint system SSS0647 Forward-facing — step 4 4. For child restraints that are equipped with webbing-mounted attachments, remove any additional slack from the anchor attach- ments. Press downward and rearward firmly in the center of the child restraint with your knee to compress the vehicle se[...]

SSS1088 2nd row seat Installing top tether strap (2nd row seats) WARNING Child restraint anchorages are de- signed to withstand only those loads imposed by correctly fitted child re- straints. Under no circumstances are they to be used to attach adult seat belts, or other items or equipment to the vehicle. Doing so could damage the child restraint [...]

1-40 Safety — Seats, seat belts and supplemental restraint system child restraints. Under no circum- stances are they to be used to attach adult seat belts, or other items or equipment to the vehicle. Doing so could damage the child restraint anchorages. The child re- straint will not be properly installed using the damaged anchorage, and a child[...]

rear seats or in the front passenger seat: 1. If you must install a child restraint in the front seat, it should be placed in a forward-facing direction only. Move the seat to the rearmost position. Child restraints for infants must be used in the rear-facing direction and, therefore, must not be used in the front seat. 2. Position the child restra[...]

1-42 Safety — Seats, seat belts and supplemental restraint system SSS0652 Forward-facing — step 5 5. Allow the seat belt to retract. Pull up on the shoulder belt to remove any slack in the belt. SSS0653 Forward-facing — step 6 6. Remove any additional slack from the seat belt; press downward and rearward firmly in the center of the child rest[...]

seat belt is not locked, repeat steps 2 through 8. SSS0676 Forward-facing — step 10 10. If the child restraint is installed in the front passenger seat, place the ignition switch in the ON position. The front passenger air bag status light should illuminate. If this light is not illuminated, see “Front passenger air bag and status light” in t[...]

1-44 Safety — Seats, seat belts and supplemental restraint system child could be seriously injured or killed in a collision. First, secure the child restraint with the seat belt. 1. If necessary, raise or remove the head restraint to position the top tether strap over the top of the seatback. If the head restraint is removed, store it in a secure[...]

tails. BOOSTER SEA TS Precautions on booster seats WARNING If a booster seat and seat belt are not used properly, the risk of a child being injured in a sudden stop or collision greatly increases: . Make sure the shoulder portion of the belt is away from the child’s face and neck and the lap portion of the belt does not cross the stomach. . Make [...]

1-46 Safety — Seats, seat belts and supplemental restraint system LRS0464 All U.S. states and Canadian provinces or territories require that infants and small children be restrained in an approved child restraint at all times while the vehicle is being operated. The instructions in this section apply to booster seat installation in the rear seats[...]

LRS0454 Front passenger position 3. The booster seat should be positioned on the vehicle seat so that it is stable. If necessary, adjust or remove the head restraint or headrest to obtain the correct booster seat fit. If the head restraint or headrest is removed, store it in a secure place. Be sure to reinstall the head restraint or headrest when t[...]

1-48 Safety — Seats, seat belts and supplemental restraint system PRECAUTIONS ON SUPPLEMEN T AL RESTRAINT SY STEM This Supplemental Restraint System (SRS) section contains important information concern- ing the following systems. . Driver and passenger supplemental front- impact air bag (NISSAN Advanced Air Bag System) . Front seat-mounted side-i[...]

SSS0131 SSS0132 WARNING . The supplemental front air bags ordinarily will not inflate in the event of a side impact, rear impact, rollover, or lower severity frontal collision. Always wear your seat belts to help reduce the risk or severity of injury in various kinds of accidents. . The front passenger air bag will not inflate if the passenger air [...]

1-50 Safety — Seats, seat belts and supplemental restraint system back against the seatback and as far-away as practical from the steer- ing wheel or instrument panel. Al- ways use the seat belts. . The driver and front passenger seat belt buckles are equipped with sensors that detect if the seat belts are fastened. The Advanced Air Bag System mo[...]

SSS0008 SSS0009 SSS0099 SSS0100 WARNING . Never let children ride unrestrained or extend their hands or face out of the window. Do not attempt to hold them in your lap or arms. Some examples of dangerous riding posi- tions are shown in the illustrations. . Children may be severely injured or killed when the front air bags, side air bags or curtain [...]

1-52 Safety — Seats, seat belts and supplemental restraint system SSS0832 SSS0833 SSS0140 SSS0162 SSS0159 WARNING Front seat-mounted side-impact sup- plemental air bags and roof-mounted curtain side-impact supplemental air bags: . The side-impact and curtain supple- mental air bags ordinarily will not inflate in the event of a front impact, rear [...]

. The seat belts, the side air bags and curtain air bags are most effective when you are sitting well back and upright in the seat. The side air bags and curtain air bags inflate with great force. Do not allow anyone to place their hand, leg or face near the side air bags on the side of the seatback of the front seat or near the side roof rails. Do[...]

1-54 Safety — Seats, seat belts and supplemental restraint system NISSAN ADVANCED AIR BAG S YS- TEM (front seats) WARNING T o ensure proper operation of the passenger’s advanced air bag system, please observe the following items. . Do not allow a passenger in the rear seat to push or pull on the seatback pocket. . Do not place heavy loads heavi[...]

some conditions, depending on the information provided by the occupant classification sensors. If the front passenger air bag is OFF , the passenger air bag status light will be illuminated (if the seat is unoccupied, the light will not be illuminated, but the air bag will be off) . (See “Front passenger air bag and status light” (P .1- 55) for[...]

1-56 Safety — Seats, seat belts and supplemental restraint system an accident. Status light : The front passenger air bag status light is located on the instrument panel. After the ignition switch is placed in the ON position, the front passenger air bag status light illumi- nates for about 7 seconds and then turns off or illuminates depending on[...]

Using the passenger air bag status light, you can monitor when the front passenger air bag is automatically turned OFF with the seat occu- pied. The light will not illuminate when the front passenger seat is unoccupied. If an adult occupant is in the seat but the passenger air bag status light is illuminated (indicating that the air bag is OFF) , i[...]

1-58 Safety — Seats, seat belts and supplemental restraint system . Do not make unauthorized changes to your vehicle’s electrical system, suspension system or front end structure. This could affect proper operation of the front air bag sys- tem. . T ampering with the air bag system may result in serious personal in- jury. Tampering includes cha[...]

SSS1092 FRONT SEA T -MOUNTED SIDE-IM- P ACT SUPPLEMEN T AL AIR BAG AND ROOF-MOUNTED CURT AIN SIDE-IM- P ACT SUPPLEMEN T AL AIR BAG S Y S- TEMS The side air bags are located in the outside of the seatback of the front seats. The curtain air bags are located in the side roof rails. All of the information, cautions and warnings in this manual apply an[...]

1-60 Safety — Seats, seat belts and supplemental restraint system . Right after inflation, several side air bags and curtain air bag system components will be hot. Do not touch them; you may severely burn yourself. . No unauthorized changes should be made to any components or wiring of side air bag and curtain air bags. This is to prevent damage [...]

becomes involved in certain types of collisions, helping to restrain front seat occupants. The pretensioner is encased with the seat belt retractor. These seat belts are used the same way as conventional seat belts. When a pretensioner activates, smoke is re- leased and a loud noise may be heard. The smoke is not harmful, and it does not indicate a[...]

1-62 Safety — Seats, seat belts and supplemental restraint system . The supplemental air bag warning light remains on approximately 7 seconds after the ignition switch is pushed to the ON position. . The supplemental air bag warning light flashes intermittently. . The supplemental air bag warning light does not come on at all. Under these conditi[...]

2 Instruments and controls Cockpit ........................................................................................ 2-3 Instrument panel ........................................................................ 2-4 Meters and gauges ................................................................... 2-5 Meter/ring illumination and needle swe[...]

Front moonroof ................................................................. 2-54 Rear moonroof .................................................................. 2-55 If the front or rear moonroof does not operate ........ 2-55 Interior lights .......................................................................... 2-56 Map lights ..........[...]

SSI0825 1. V ehicle Dynamic Control (VDC) OFF switch 2. Blind Spot W arning (BSW) switch* — Blind Spot W arning (BSW)* 3. Sliding door switch* (driver’s side) 4. Sliding door switch* (passenger’s side) 5. Instrument brightness control switch 6. Power lift gate switch* 7. Headlight, fog light and turn signal switch — Headlight — T urn sign[...]

2-4 Instruments and controls SSI0824 1. Side ventilator 2. Meters and gauges 3. Push-button ignition switch 4. Hazard warning flasher switch 5. Shift lever 6. Center display — Center color display* — Navigation system** 7. Center multi-function control panel* — Navigation system** — V ehicle information and setting buttons* — RearView Mon[...]

JVC0210X 1. Instrument brightness control switch 2. T achometer 3. Speedometer 4. Fuel gauge 5. Warning/indicator lights 6. T rip computer switch 7. V ehicle information display — T rip computer 8. Engine coolant temperature gauge 9. Odometer/twin trip odometer/Continuously V ari- able T ransmission (CVT) position indicator 10. TRIP/RESET switch [...]

2-6 Instruments and controls JVI0252X Speedometer SPEEDOMETER AND ODOMETER Speedometer The speedometer indicates vehicle speed in miles per hour (MPH) and kilometers per hour (km/h) . SIC4632 Odometer/twin trip odometer Odometer/twin trip odometer The odometer * 1 and twin trip odometer * 2 are displayed when the ignition switch is in the ON positi[...]

JVI0253X T ACHOMETER The tachometer indicates engine speed in revolutions per minute (RPM) . Do not rev the engine into the red zone * 1 . CAUTION When engine speed approaches the red zone, shift to a higher gear or reduce engine speed. Operating the engine in the red zone may cause serious engine damage. SIC4634 ENGINE COOLANT TEMPERATURE GAUGE Th[...]

2-8 Instruments and controls JVI0357X FUEL GAUGE The gauge indicates the approximate fuel level in the tank. The gauge may move slightly during braking, turning, acceleration, or going up or down hills. The gauge needle returns to “0” (empty) after the ignition switch is pushed to the OFF position. Refill the fuel tank before the gauge register[...]

on your everyday route. The compass will be calibrated once it has tracked 3 complete circles. T o turn on and off the compass manually, push the switch * A while the ignition switch is in the ON position. SIC0611B Zone map Instruments and controls 2-9 I n f o r m a t i o n P r o v i d e d b y :[...]

2-10 Instruments and controls Z ONE VARIA TION CHANGE PROCE- DURE The difference between magnetic north and geographical north is known as variance. In some areas, this difference can sometimes be great enough to cause false compass readings. Follow these instructions to set the variance for your particular location if this happens: 1. Push the swi[...]

Anti-lock Braking System (ABS) warning light Intelligent Key system warning light Exterior light indicator Low tire pressure warning light Front passenger air bag status light Blind Spot Warning (BSW) system warning light (if so equipped) Master warning light High beam indicator light Seat belt warning light and chime Malfunction Indicator Light (M[...]

2-12 Instruments and controls CHECKING BULBS With all doors closed, apply the parking brake and push the ignition switch to the ON position without starting the engine. The following lights will come on (if so equipped): , or , , , , The following lights come on briefly and then go off (if so equipped): , or , , , , , , If any light does not come o[...]

“ Anti-lock Braking System (ABS) warning light” (P .2-12) .) WARNING . Y our brake system may not be working properly if the warning light is on. Driving could be dangerous. If you judge it to be safe, drive care- fully to the nearest service station for repairs. Otherwise, have your vehicle towed because driving it could be dangerous. . Pressi[...]

2-14 Instruments and controls Intelligent Key system warning light After the ignition switch is pushed to the ON position, this light comes on for about 2 seconds and then turns off. This light warns of a malfunction with the Intelligent Key system. If the light comes on while the engine is stopped, it may be impossible to start the engine. If the [...]

the light still illuminates while driv- ing after adjusting the tire pressure, a tire may be flat. If you have a flat tire, replace it with a spare tire as soon as possible. . When a spare tire is mounted or a wheel is replaced, the TPMS will not function and the low tire pressure warning light will flash for approxi- mately 1 minute. The light wil[...]

2-16 Instruments and controls . The supplemental air bag warning light does not come on at all. Unless checked and repaired, the Supplemental Restraint Systems (air bag systems) and/or the pretensioners may not function properly. For additional information, see “Supplemental restraint system” (P .1-48) . WARNING If the supplemental air bag warn[...]

High beam indicator light This light comes on when the headlight high beam is on and goes out when the low beam is selected. Malfunction Indicator Light (MIL) If the malfunction indicator light comes on steady or blinks while the engine is running, it may indicate a potential emission control and/or Continuously Variable T ransmission (CVT) mal- fu[...]

2-18 Instruments and controls will remain on while the ignition switch is in the ON position. For additional information, see “Security systems” (P .2-27) . T urn signal/hazard indicator lights The light flashes when the turn signal switch lever or hazard switch is turned on. V ehicle Dynamic Control (VDC) off indicator light The light comes on[...]

JVI0539X Instruments and controls 2-19 I n f o r m a t i o n P r o v i d e d b y :[...]

2-20 Instruments and controls OPERA TIONAL INDICA T ORS 1. Engine start operation indicator This indicator appears when the shift lever is in the P (Park) position. This indicator means that the engine will start by pushing the ignition switch with the brake pedal depressed. Y ou can start the engine directly in any position. 2. NO KEY warning This[...]

8. Low fuel warning This warning appears when the fuel level in the tank is getting low. Refuel as soon as it is convenient, preferably before the fuel gauge reaches the empty (0) position. There is a small reserve of fuel remaining in the tank when the fuel gauge reaches the empty (0) position. 9. Low washer fluid warning This warning appears when[...]

2-22 Instruments and controls SIC4237 MAINTENANCE INDICA T ORS 1. Engine oil replacement indicator This indicator appears when the customer set time comes for changing the engine oil. Y ou can set or reset the distance for changing the engine oil. (See “T rip computer” (P .2-23) .) 2. Oil filter replaceme nt indicator This indicator appears whe[...]

SIC3580 TRIP COMPUTER Switches for the trip computer are located on the right side of the combination meter panel. T o operate the trip computer, push the side of the switches as shown above. * A switch * B switch When the ignition switch is pushed to the ON position, modes of the trip computer can be selected by pushing the switch * A . Each time [...]

2-24 Instruments and controls SIC3674 Average fuel consumption (MPG, l/100 km or km/l) and speed (MPH or km/h) Fuel consumption: The average fuel consumption mode shows the average fuel consumption since the last reset. Resetting is done by pushing the switch * B for longer than 1 second. (The average speed is also reset at the same time.) The disp[...]

SIC4702 Distance to empty (dte — miles or km) The distance to empty (dte) mode provides you with an estimation of the distance that can be driven before refueling. The dte is constantly being calculated, based on the amount of fuel in the fuel tank and the actual fuel consumption. The display is updated every 30 seconds. The dte mode includes a l[...]

2-26 Instruments and controls SIC3678 Setting Setting cannot be made while driving. A message “Setting can only be operated when stopped” is also displayed on the vehicle information display. The switch * A and switch * B are used in the setting mode to select and decide a menu. SKIP: Push the switch * A to move to the warning check mode. Push [...]

SIC3993 W arning check T o see if there are any of the following warnings and corresponding details, select this menu. . No key warning . Low fuel warning . Low washer fluid warning . Parking brake release warning . Door/lift gate open warning . Loose fuel cap warning . Check tire pressure warning SKIP: Push the switch * A to move to the warning ch[...]

2-28 Instruments and controls VEHICLE SECURITY S YSTEM The vehicle security system provides visual and audio alarm signals if someone opens the doors or lift gate when the system is armed. It is not, however, a motion detection type system that activates when a vehicle is moved or when a vibration occurs. The system helps deter vehicle theft but ca[...]

by releasing the door inside lock knob, the alarm will activate.) How to stop an activated alarm The alarm will stop by unlocking a door by pushing the unlock button on the Intelligent Key, the door handle request switch or using the mechanical key. The alarm will not stop if the ignition switch is pushed to the ACC or ON position. If the system do[...]

2-30 Instruments and controls service as soon as possible. Please bring all Intelligent Keys that you have when visiting a NISSAN dealer for service. WARNING In freezing temperatures the washer solution may freeze on the windshield and obscure your vision which may lead to an accident. Warm windshield with the defroster before you wash the windshie[...]

SIC3664 The windshield wiper and washer operates when the ignition switch is in the ON position. Push the lever down to operate the wiper at the following speed: * 1 INT — intermittent operation can be adjusted by turning the knob toward * A (Slower) or * B (Faster) . Models with center multi-function control panel: When the speed sensing wiper i[...]

2-32 Instruments and controls window washer reservoir tank to mix the washer fluid concentrate and water. If the rear window wiper operation is interrupted by snow or ice, the wiper may stop moving to protect its motor. If this occurs, turn the wiper switch to the OFF position and remove the snow or ice that is on and around the wiper arms. In appr[...]

XENON HEADLIGHTS (if so equipped) WARNING HIGH VOL TAGE . When xenon headlights are on, they produce a high voltage. T o prevent an electric shock, never attempt to modify or disassemble. Always have your xenon headlights replaced at a NISSAN dealer. . X enon headlights provide consider- ably more light than conventional headlights. If they are not[...]

2-34 Instruments and controls SIC3669 Autolight system (if so equipped) The autolight system allows the headlights to be set so they turn on and off automatically. T o set the autolight system: 1. Make sure the headlight switch is in the AUT O position * 1 . 2. Push the ignition switch to the ON position. 3. The autolight system automatically turns[...]

seconds. For automatic headlights off delay setting, see “V ehicle information and settings (models with center multi-function control panel)” (P .4-9) . SIC3670 Headlight beam select * 1 T o select the low beam, put the lever in the neutral position as shown. * 2 T o select the high beam, push the lever forward while the switch is in the posit[...]

2-36 Instruments and controls headlights turn off automatically. SIC2275 Headlight aiming control (if so equipped) Depending on the number of occupants in the vehicle and the load it is carrying, the headlight axis may be higher than desired. If the vehicle is traveling on a hilly road, the headlights may directly hit the rearview mirror of the veh[...]

running lights will remain on until the ignition switch is pushed to the OFF position. WARNING When the daytime running light system is active, tail lights on your vehicle are not on. It is necessary at dusk to turn on your headlights. Failure to do so could cause an accident injuring yourself and others. SIC3585 Instrument brightness control The i[...]

2-38 Instruments and controls Choose the appropriate method to signal a lane change based on road and traffic conditions. SIC3672 FOG LIGHT SWITCH (if so equipped) T o turn the fog lights on, turn the headlight switch to the position, then turn the switch to the position. T o turn them off, turn the switch to the OFF position. The headlights must b[...]

WARNING Do not use or allow occupants to use the seat heater if you or the occupants cannot monitor elevated seat tempera- tures or have an inability to feel pain in those body parts in contact with the seat. Use of the seat heater by such people could result in serious injury. CAUTION . The battery could run down if the seat heater is operated whi[...]

2-40 Instruments and controls The heater is controlled by a thermostat, automatically turning the heater on and off. The indicator light will remain on as long as the switch is on. When the vehicle’s interior is warmed, or before you leave the vehicle, be sure to turn off the switch. SSD1179 The Blind Spot Warning (BSW) switch will turn on and of[...]

SSD1149 The vehicle should be driven with the V ehicle Dynamic Control (VDC) system on for most driving conditions. If the vehicle is stuck in mud or snow , the VDC system reduces the engine output to reduce wheel spin. The engine speed will be reduced even if the accelerator is depressed to the floor. If maximum engine power is needed to free a st[...]

2-42 Instruments and controls T ype A T o use the power outlet, pull the cover as illustrated. CAUTION . The outlet and plug may be hot during or immediately after use. . Do not use with accessories that exceed a 12 volt, 120W (10A) power draw. Do not use double adapters or more than one electrical accessory. . This power outlet is not designed for[...]

. Do not use with accessories that exceed a 120 volt, 150W (1.25A) power draw or the power outlet may switch off automatically. If this occurs, turn the main switch on the power outlet off and wait a short period of time before turning it back on again. If an electrical appliance with a wattage of less than 150W is used, the power outlet will be us[...]

2-44 Instruments and controls SIC4726 Instrument panel Front Instrument panel: T o open the cup holder, push the instrument panel * 1 . SIC4727 Front side of the front center console SIC4654 Back side of the front center console SIC4719 2nd row seat I n f o r m a t i o n P r o v i d e d b y :[...]

SIC4419 3rd row seat SIC4720 Soft bottle holder Soft bottle holders are located on the front doors and sliding doors. CAUTION . Do not use bottle holder for any other objects that could be thrown about in the vehicle and possibly injure people during sudden braking or an accident. . Do not use bottle holder for open liquid containers. SIC3589 SUNGL[...]

2-46 Instruments and controls . Do not leave glasses in the sun- glasses holder while parking in direct sunlight. The heat may da- mage the glasses. SIC4647 GL OVE BOX WARNING Keep glove box lid closed while driving to help prevent injury in an accident or a sudden stop. T o open the glove box, pull the handle * 1 . T o close, push the lid in until[...]

SIC4730 Front CONSOLE BOX Front T o open the box, pull the knob. T o close, push the lid in until the lock latches. SIC4721 2nd row center console 2nd row center console Pull up on lever * A to open the console box lid. T o remove the 2nd row center console box: 1. Pull up on handle * B on rear of console and tilt the console up. 2. Move the consol[...]

2-48 Instruments and controls SIC4731 CARGO FLOOR BO X T o open the cargo floor box lid, pull the strap * A . T o hold lid open, secure the strap * B to the hook on the under side of cargo floor box lid. WARNING T o prevent injury in an accident or sudden stop, do not drive with the cargo floor box lids open. Always remove the strap * B from hook a[...]

SIC4733 Seatbacks Seatbacks The hooks are located on the front seatbacks. T o use the hook on the seatbacks, push the lower side of the hook and pull it out. CAUTION Do not apply a total load of more than 9 lb (4 kg) to the hook. SIC4737 ROOF RACK (if so equipped) Always distribute the luggage evenly on the roof rack. Do not load more than 99 lb (4[...]

2-50 Instruments and controls comfortably lift the items onto the roof rack from the ground, use a ladder or stool. SIC3505 COA T HOOKS The coat hooks are equipped beside the rear personal lights. CAUTION Do not place items which are more than 2 lb (1 kg) on the hook. SIC4659 CAUTION . Do not pull the sunshade in any direction other than up. This m[...]

T o store the sunshade, remove the sunshade from the hooks and lower it. The sliding door may be opened or closed with the sunshades in either the raised or lowered position. POWER WINDOWS WARNING . Make sure that all passengers have their hands, etc . inside the vehicle while it is in motion and before closing the windows. Use the win- dow lock sw[...]

2-52 Instruments and controls Locking passengers ’ windows When the lock button * C is pushed in, only the driver side window can be opened or closed. Push it in again to cancel. SIC3241 Passenger side power window switch The passenger side switch will open or close only the corresponding window. T o open or close the window, push down or pull up[...]

Auto reverse function WARNING There are some small distances imme- diately before the closed position which cannot be detected. Make sure that all passengers have their hands, etc ., in- side the vehicle before closing the window. If the control unit detects something caught in the window as it is closing, the window will be immediately lowered. Th[...]

2-54 Instruments and controls passenger’s door is opened during this period of about 45 seconds, power to the moonroof is canceled. SIC4643 FRONT MOONROOF Opening and closing sunshade The sunshade will open automatically when the front moonroof is opened. However, it must be closed manually. Sliding When the * A side of the switch is pushed, the [...]

SIC4644 REAR MOONROOF Rear moonroof operation switches are located on the front map light and rear ceiling. Sunshade The sunshade will open automatically when the rear moonroof is opened. However, it must be closed manually. Sliding T o fully open or close the moonroof, push the switch to the open * A or close * B position and release. It does not [...]

2-56 Instruments and controls 3. Release the moonroof switch, then continue to push on the * B side again. The moonroof will operate in the close direction. (The moonroof operates inch by inch.) 4. After the moonroof stops moving, release the moonroof switch and within 4 seconds, push side * B again. The moonroof will automatically open once. 5. Wi[...]

. The driver’s door is unlocked. . The last open door excluding the lift gate is closed. The interior light timer will be cancelled when: . The driver’s door is locked. . The ignition switch is pushed to the ON position. When the rear personal light switch is in the ON position * C , the rear personal lights illuminate, regardless of any condit[...]

2-58 Instruments and controls . any door is opened with the ignition switch in any position — remain on while the door is opened. When the door is closed, the lights go off. OFF position When the switch is in the OFF position * 3 , the lights will not illuminate, regardless of the condition. CAUTION Do not use for extended periods of time with th[...]

SIC2925 When the switch is in the DOOR position * A , the light illuminates while the lift gate is opened. When the lift gate is closed, the light will turn off. When the switch is in the OFF position * B , the light will turn off. The lights will turn off after a period of time when the lights remain illuminated to prevent the battery from becomin[...]

2-60 Instruments and controls PROGRAMMING HomeLin k  If you have any questions or are having difficulty programming your HomeLink  buttons, refer to the HomeLink  web site at: www.homelink.com or call 1-800-355-3515. NOTE: It is also recommended that a new battery be placed in the hand-held transmitter of the device being programmed to Hom[...]

4. At the receiver located on the garage door opener motor in the garage, locate the “learn” or “smart” button (the name and color of the button may vary by manufacturer but it is usually located near where the hanging antenna wire is attached to the unit) . If there is difficulty locating the button, reference the garage door opener’s ma[...]

2-62 Instruments and controls PROGRAMMING TROUBLESH OO T - ING If the HomeLink  does not quickly learn the hand-held transmitter information: . replace the hand-held transmitter batteries with new batteries. . position the hand-held transmitter with its battery area facing away from the HomeLink  surface. . press and hold both the HomeLink ?[...]

NOTE: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. For Canada: This device complies with Industry Canada licence-exempt RSS standard(s) . Opera- tion is subject to the following two condi- tions: (1) this device may not cause interference, and (2)[...]

2-64 Instruments and controls MEMO I n f o r m a t i o n P r o v i d e d b y :[...]

3 Pre-driving checks and adjustments Keys .............................................................................................. 3-3 Intelligent Key system ......................................................... 3-3 Mechanical key .................................................................... 3-4 V alet hand-off ....................[...]

Outside mirrors ................................................................. 3-35 V anity mirror ....................................................................... 3-36 Automatic drive positioner (if so equipped) .................... 3-36 Entry/exit function ............................................................. 3-36 Memory storage[...]

A key number plate is supplied with your keys. Record the key number and keep it in a safe place (such as your wallet) , not in the vehicle. If you lose your keys, see a NISSAN dealer for duplicates by using the key number. NISSAN does not record any key numbers so it is very important to keep track of your key number plate. A key number is only ne[...]

3-4 Pre-driving checks and adjustments nents when registering new keys, be sure to take all Intelligent Keys that you have to the NISSAN dealer. CAUTION . Be sure to carry the Intelligent Key with you when driving. The Intelli- gent Key is a precision device with a built-in transmitter. T o avoid dama- ging it, please note the following. — The In[...]

CAUTION Always carry the mechanical key in- stalled in the key. V ALET HAND-OFF When you have to leave a key with a valet, give them the Intelligent Key itself after removing the mechanical key to protect your belongings. T o prevent the glove box from being opened during valet hand-off, follow the procedures below. 1. Remove the mechanical key fro[...]

3-6 Pre-driving checks and adjustments the key is turned once. (See “How to use SETTING button” (P .4-14) .) OPENING AND CLOSING WINDOWS WITH THE MECHANIC AL KEY (if so equipped) The driver’s door key operation also allows you to open and close the window that is equipped with the automatic open/close function. (See “Power windows” (P .2-[...]

T o unlock the doors, push the power door lock switch to the unlock position * 2 . Lockout protection When the power door lock switch (driver or front passenger) is moved to the lock position with any door open, all doors will lock and unlock automatically. With the Intelligent Key left in the vehicle and any door open, all doors will unlock automa[...]

3-8 Pre-driving checks and adjustments SP A2818 Locking with inside lock knob T o lock without an Intelligent Key , push the lock knob to the lock position * 1 , and then close the door. T o unlock, pull the inside lock knob to the unlock position * 2 . SP A2387 Opening/Closing the sliding door The sliding door will be latched at the fully opened/c[...]

SP A2701 CAUTION Before closing the sliding door, make sure that no objects are placed on the door step. Otherwise, the harness * A could be damaged. SLIDING DOOR AUTO CL OSURE FUNCTION (if so equipped) The auto closure function will operate when the sliding door is not fully closed. WARNING When the auto closure function is operating, keep hands a[...]

3-10 Pre-driving checks and adjustments The power sliding door system will allow you to open or close the sliding doors automatically using the door handles, the sliding door switch, the Intelligent Key or sliding door one-touch switch. JVP0184X WARNING . There are some small distances immediately before the closed posi- tion which cannot be detect[...]

PRECAUTIONS ON POWER SLIDING DOOR OPERA TION . Do not perform the power sliding door operation frequently when the engine is stopped. This could cause a dis- charged battery. . Do not start the engine while the sliding door is in an power operation. The door may not operate properly. . Make sure that the sliding doors are closed before starting the[...]

3-12 Pre-driving checks and adjustments The power sliding door system can be operated when all of following conditions are satisfied. . The vehicle is stopped. . Battery voltage is normal. . The sliding door is unlocked. . The fuel-filler door is closed (for driver’s side only) . When the ignition switch is in the "ON" position, the sys[...]

OPERA TING SLIDING DOOR BY POWER ASSIST T o operate, pull the inside or outside door handle until you hear the buzzer, the door will automatically open or close. If the door handle is operated while the sliding door is moving, the door will reverse directions and stop at either the full open or closed position. SLIDING DOOR AUTO REVERSE FUNCTION If[...]

3-14 Pre-driving checks and adjustments computer. . When the vehicle is parked near a parking meter. In such cases, correct the operating conditions before using the Intelligent Key function or use the mechanical key. Although the life of the battery varies depending on the operating conditions, the battery’s life is approximately 2 years. If the[...]

SP A2074 INTELLIGENT KEY OPERA TING RANGE The Intelligent Key functions can only be used when the Intelligent K ey is within the specified operating range from the request switch * 1 . When the Intelligent Key battery is discharged or strong radio signals are present near the operating location, the Intelligent Key system’s operating range become[...]

3-16 Pre-driving checks and adjustments . Do not pull the door handle before pushing the door handle request switch. The door will be unlocked but will not open. Release the door handle once and pull it again to open the door. . Models with center multi-function control panel: The Intelligent Key system (opening/closing doors with the door handle r[...]

When you carry the Intelligent Key with you, you can lock or unlock all doors by pushing the door handle request switch * A or the lift gate request switch * B within the range of opera- tion. When you lock or unlock the doors or the lift gate, the hazard indicator will flash and the horn (or the outside chime) will sound as a confirma- tion. For d[...]

3-18 Pre-driving checks and adjustments Unlocking doors 1. Push the door handle request switch * A or the lift gate request switch * B once while carrying the Intelligent Key with you. 2. The hazard indicator flashes once and the outside chime sounds once. The corre- sponding door or the lift gate will unlock. 3. Push the request switch again withi[...]

L OCK button on the Intelligent Key after the door is closed. (See “Remote keyless entry system” (P .3-21) .) BA TTERY SA VER SY STEM When all the following conditions are met for a period of time, the battery saver system will cut off the power supply to prevent battery dis- charge. . The ignition switch is in the ACC position, and . All doors[...]

3-20 Pre-driving checks and adjustments TROUBLESHOO TING GUIDE Symptom Possible cause Action to take When pushing the ignition switch to stop the engine The SHIFT P warning appears on the display and the inside warning chime sounds con- tinuously. The shift lever is not in the P (Park) position. Shift the shift lever to the P (Park) position. When [...]

WARNING The Intelligent Key transmits radio waves when the buttons are pushed. The FA A advises that radio waves may affect aircraft navigation and commu- nication systems. Do not operate the Intelligent Key while on an airplane. Make sure the buttons are not operated unintentionally when the unit is stored for a flight. It is possible to lock/unlo[...]

3-22 Pre-driving checks and adjustments SP A2850 T ype C (if so equipped) * 1 L OCK button * 2 UNL OCK button * 3 Power sliding door button (passenger’s side) * * 4 Power sliding door button (driver’s side) * * 5 Power lift gate button * * 6 P ANIC button *: if so equipped HOW T O USE REMOTE KEYLESS ENTR Y S YSTEM When you lock or unlock the do[...]

The door windows can be opened or closed by turning the mechanical key in a door lock. (See “Doors” (P .3-5) .) Opening/closing power sliding door (if so equipped) T o open/close the sliding door, push the power sliding door button * 3 or * 4 on the Intelligent Key for about 1 second. The power sliding door will automatically open/close. If the[...]

3-24 Pre-driving checks and adjustments Hazard indicator and horn mode: DOOR LOCK DOOR UNLOCK Intelligent Key system (Using door handle or lift gate request switch) HAZARD - twice OUTSIDE CHIME - twice HAZARD - once OUTSIDE CHIME - once Remote keyless entry system (Using or button) HAZARD - twice HORN - once HAZARD - once HORN - none Hazard indicat[...]

SP A2858 When opening the hood: 1. Pull the hood lock release handle * 1 located below the instrument panel; the hood will then spring up slightly. 2. Locate the lever * 2 in between the hood and grille and push the lever sideways with your fingertips. 3. Raise the hood * 3 . 4. Remove the support rod * 4 and insert it into the slot * 5 . Hold the [...]

3-26 Pre-driving checks and adjustments WARNING . Always be sure the lift gate has been closed securely to prevent it from opening while driving. . Do not drive with the lift gate open. This could allow dangerous exhaust gases to be drawn into the vehicle. See “Exhaust gas (carbon monox- ide)” (P .5-2) of this manual. . Do not leave children un[...]

SP A2547 Power door main switch The power lift gate operation can be turned on or off by the power door main switch on the instrument panel. When the power door main switch is pushed to the OFF position, the power operation is not available by the power lift gate switch on the lift gate and lift gate opener switch. SP A2860 Power lift gate switch ?[...]

3-28 Pre-driving checks and adjustments Power open When the lift gate is fully closed, the lift gate will fully open automatically by: . pushing the power lift gate switch * A on the instrument panel for more than 1 second . pushing the lift gate opener switch * B . pushing the power lift gate button * C on the Intelligent Key for more than 1 secon[...]

SP A2853 Safe Mode If the gas stays of the lift gate * 1 lose pressure, the power lift gate safe mode is activated. When the safe mode is activated, the lift gate intermittently closes. Then the lift gate will be pulled to the closed and latched position by a motor. The power lift gate cannot be opened using the switches at any time in the safe mod[...]

3-30 Pre-driving checks and adjustments SP A2824 LIFT GA TE RELEASE If the lift gate cannot be opened due to a discharged battery, follow these steps. 1. Remove the cover * 1 inside of the lift gate with a suitable tool. 2. Move the lever * 2 as illustrated to open the lift gate. Have the vehicle checked by a NISSAN dealer. SP A2861 OPENING FUEL -F[...]

. Never pour fuel into the throttle body to attempt to start your vehi- cle. . Close the sliding door before open- ing the fuel-filler door. . Do not fill a portable fuel container in the vehicle or trailer. Static elec- tricity can cause an explosion of flammable liquid, vapor or gas in any vehicle or trailer. To reduce the risk of serious injury [...]

3-32 Pre-driving checks and adjustments SP A2833 L OOSE FUEL CAP warning The L OOSE FUEL CAP warning appears on the vehicle information display when the fuel-filler cap is not tightened correctly after the vehicle has been refueled. It may take a few driving trips for the message to be displayed. T o turn off the warning, perform the following step[...]

SIC3451 CAUTION . Do not store the main sun visor before storing the extension sun visor. . Do not pull the extension sun visor forcedly downward. 1. T o block out glare from the front, swing down the main sun visor * 1 . 2. T o block glare from the side, remove the main sun visor from the center mount and swing it to the side * 2 . 3. Draw out the[...]

3-34 Pre-driving checks and adjustments SP A2143 Manual anti-glare type The night position * 1 will reduce glare from the headlights of vehicles behind you at night. Use the day position * 2 when driving in daylight hours. WARNING Use the night position only when ne- cessary, because it reduces rear view clarity. SP A2422A T ype A (if so equipped) [...]

tion, see “HomeLink  Universal T ransceiver” (P .2-59) . OUTSIDE MIRRORS WARNING Objects viewed in the outside mirror on the passenger side are closer than they appear. Be careful when moving to the right. Using only this mirror could cause an accident. Use the inside mirror or glance over your shoulder to properly judge distances to other o[...]

3-36 Pre-driving checks and adjustments SP A1829 Foldable outside mirrors Fold the outside mirror by pushing it toward the rear of the vehicle. SIC4448 V ANITY MIRROR T o use the front vanity mirror, pull down the sun visor and pull up the cover. The automatic drive positioner system has two features: . Entry/exit function . Memory storage ENTR Y/E[...]

when the function is activated. Note that the indicator lights may illuminate after 5 seconds while holding the SET switch. This indicates readiness for linking the Intelligent Key to a stored memory position. K eep the SET switch pressed for more than 10 seconds to turn on or off the entry/exit function. The entry/exit function can also be activat[...]

3-38 Pre-driving checks and adjustments Confirming memory storage . Push the ignition switch to the ON position and push the SET switch. If the main memory has not been stored, the indicator light will come on for approximately 0.5 second. When the memory has stored in position, the indicator light will stay on for approximately 5 seconds. . If the[...]

4 Monitor, heater, air conditioner, audio, phone and voice recognition systems Safety note .................................................................................. 4-4 Center multi-function control panel (if so equipped) ...... 4-4 How to use multi-function controller .............................. 4-6 How to use touch screen (models with[...]

FM-AM-SA T radio with Compact Disc (CD) player (T ype A) .............................................................................. 4-72 FM-AM-SA T radio with Compact Disc (CD) player (T ype B) .............................................................................. 4-82 DVD (Digital V ersatile Disc) player operation (if so equipped) ....[...]

T roubleshooting guide .................................................. 4-170 Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-3 I n f o r m a t i o n P r o v i d e d b y :[...]

4-4 Monitor, heater, air conditioner, audio, phone and voice recognition systems WARNING . Do not disassemble or modify this system. If you do, it may result in accidents, fire, or electric shock. . Do not use this system if you notice any abnormality, such as a frozen screen or lack of sound. Continued use of the system may result in accident, fir[...]

SAA3613 Models without navigation system 1. “INFO” button (P .4-10) 2. “ST ATUS” status display button (P .4-9) 3. “DISP” display setting button (P .4-14) 4. “ ” brightness UP button (P .4-9) 5. “ ECON” button (P .4-10) 6. “SETTING” button (P .4-14) 7. Multi-function controller (P .4-6) 8. “ OFF” brightness control and d[...]

4-6 Monitor, heater, air conditioner, audio, phone and voice recognition systems HOW T O USE MUL TI-FUNCTIO N CONTROLLER Choose an item on the display by rotating or pushing the center dial * 1 upward/ downward, and push the ENTER button * 2 for operation. If you push the BACK button * 3 before the setup is completed, the setup will be canceled and[...]

SAA2474 Adjusting an item: T ouch the + * 1 or í * 2 button to adjust the settings. T ouch the * 3 or * 4 button to move to the previous or next item. T ouch the * 5 or * 6 button to move to the previous or next page. SAA2475 Inputting characters: T ouch the letter or number * 1 . There are some options available when inputting characters. . Upper[...]

4-8 Monitor, heater, air conditioner, audio, phone and voice recognition systems SAA3673 MENU OPTIONS (models with naviga- tion system) The start menu can be displayed using the menu control switch on the steering-wheel-mounted controls. 1. While the MAP or ST A TUS screen is displayed, push and hold the menu control switch until the “Menu Option[...]

HOW T O SELECT MENUS ON THE SCREEN V ehicle functions are viewed on the display screen in menus. To select each key item, highlight the preferred item using the multi- function controller and push the ENTER button. Whenever a menu selection is made or menu item is highlighted, different areas on the screen provide you with important information. Se[...]

4-10 Monitor, heater, air conditioner, audio, phone and voice recognition systems HOW T O USE ECON BUTT ON (models without navigation system) Push the “ ECON” button to show fuel economy information. (See “How to use INFO button” (P .4-10) .) HOW T O USE INFO BUTT ON The display screen shows vehicle and navigation information for your conve[...]

JVH0995X SAA2480 Models with navigation system JVH0996X JVH0181M Models without navigation system Fuel Economy information The approximate distance to empty, average fuel economy and current fuel economy will be displayed for reference. T o reset the average fuel economy (Avg Fuel Econ or Average Fuel Economy) , select the “Reset Fuel Eco” or ?[...]

4-12 Monitor, heater, air conditioner, audio, phone and voice recognition systems SAA2481 Models with navigation system JVH0183M Models without navigation system Maintenance information The maintenance intervals can be displayed for the engine oil, oil filter, tire and other reminders. T o set a maintenance interval, select a preferred item from th[...]

1. Set the interval (mileage) of the maintenance schedule. T o determine the recommended maintenance interval, refer to your “NISSAN Service and Maintenance Guide” . 2. T o display the reminder automatically when the desired distance is reached, select the “Reminder” key. 3. Reset the driving distance to the new maintenance schedule. 4. T o[...]

4-14 Monitor, heater, air conditioner, audio, phone and voice recognition systems Navigation System Owner’s Manual. Voice Recognition: For the details of this item, see “NISSAN voice recognition system (models with navigation system)” (P .4-148) . JVH0156M Models with navigation system JVH0175M Models without navigation system HOW T O USE SET[...]

SAA2485 Models with navigation system SAA2740 Models without navigation system Audio settings The display as illustrated will appear when pushing the SETTING button and selecting the “ Audio” key. Bass/T reble/Balance/Fade: T o adjust the speaker tone quality and sound balance, select the “Bass”, “T reble”, “Balance” or “Fade” k[...]

4-16 Monitor, heater, air conditioner, audio, phone and voice recognition systems SAA2554 Example V olume & Beeps settings (models with navigation system) The display as illustrated will appear when pushing the SETTING button, selecting the “V olume & Beeps” key. Audio Volume: T o increase or decrease the audio volume, select the “Aud[...]

SAA2917 Models with navigation system SAA2079 Models without navigation system REAR DISPLA Y settings (if so equipped) The “Rear Display” screen will appear when pushing the SETTING button, selecting the “Rear Display” key. Rear Display (models with navigation sys- tem)/Rear Display Open (models without navigation system) : When this item i[...]

4-18 Monitor, heater, air conditioner, audio, phone and voice recognition systems Brightness/Contrast/Background Color: T o adjust the brightness, contrast and back - ground color of the screen, select the appro- priate “Brightness”, “Contrast” or “Background Color” key and push the ENTER button. Y ou can then adjust the brightness and [...]

When any mode button is pushed with the screen off, the screen turns on for further operation. The screen will turn off automatically 5 seconds after the operation is finished. T o turn on the screen, set this item to the ON position, or push and hold the “ OFF” button. . Brightness/Contrast/Background Color T o adjust the brightness and contra[...]

4-20 Monitor, heater, air conditioner, audio, phone and voice recognition systems Slide Driver Seat Back on Exit (if so equipped) : When this item is turned on, the driver’s seat moves backward for easy exit if the ignition switch is in the OFF position and the driver’s door is opened. After getting into the vehicle and pushing the ignition swi[...]

hour or per minute. Daylight Saving Time: T urn this item to ON for daylight saving time application. Time Zone: Choose the time zone from the following Models with navigation system . Pacific . Mountain . Central . Eastern . Atlantic . Newfoundland . Hawaii . Alaska Models without navigation system . Eniwetok, K wajalein . Midway Island, Samoa . H[...]

4-22 Monitor, heater, air conditioner, audio, phone and voice recognition systems V oice Recognition settings (models with navigation system) For details about the “Voice Recognition” settings, see “NISSAN voice recognition system (models with navigation system)” (P .4-148) . SAA2491 Image Viewer (models with navigation system) The image fi[...]

SAA2492 Full Screen Display: The full screen display will appear when select- ing the “Full Screen Display” key. T o operate the Image Viewer or to change the settings, select the desired key using the multi- function controller. . (Start) Select the “ ” key to start playing the slideshow. . (Stop) Select the “ ” key to stop the slidesh[...]

4-24 Monitor, heater, air conditioner, audio, phone and voice recognition systems The system is designed as an aid to the driver in situations such as slot parking or parallel parking. When the shift lever is shifted into the R (Reverse) position, the monitor display shows the view to the rear of the vehicle. WARNING Failure to follow the warnings [...]

SAA1896 HOW T O READ THE DISPLA YED LINES Guiding lines which indicate the vehicle width and distances to objects with reference to the vehicle body line * A are displayed on the monitor. Distance guide lines: Indicate distances from the vehicle body. . Red line * 1 : approx. 1.5 ft (0.5 m) . Y ellow line * 2 : approx. 3 ft (1 m) . Green line * 3 :[...]

4-26 Monitor, heater, air conditioner, audio, phone and voice recognition systems SAA1897 HOW T O P ARK WITH PREDICTIVE COURSE LINES (models with center multi-function control panel) 1. Visually check that the parking space is safe before parking your vehicle. 2. The rear view of the vehicle is displayed on the screen * A when the shift lever is mo[...]

5. When the vehicle is parked in the space completely, move the shift lever to the P (Park) position and apply the parking brake. JVH0168X DIFFERENCE BETWEEN PREDICTIVE AND ACTUAL DIST ANCES (if so equipped) Backing up on a steep uphill When backing up the vehicle up a hill, the distance guide lines and the vehicle width guide lines are shown close[...]

4-28 Monitor, heater, air conditioner, audio, phone and voice recognition systems JVH1030X Backing up on a steep downhill When backing up the vehicle down a hill, the distance guide lines and the vehicle width guide lines are shown further than the actual distance. For example, the display shows 3 ft (1 m) to the place * A , but the actual 3 ft (1 [...]

JVH1009X Backing up behind a projecting object The position * C is shown further than the position * B in the display. However, the position * C is actually at the same distance as the position * A . The vehicle may hit the object when backing up to the position * A if the object projects over the actual backing up course. SAA2606 PREDICTIVE COURSE[...]

4-30 Monitor, heater, air conditioner, audio, phone and voice recognition systems HOW T O ADJUST THE SCREEN Models with Center Multi-function Control Panel: . T o adjust the Display ON/OFF , Brightness, Tint, Color, Contrast and Black Level of the RearView Monitor, push the SETTING but- ton with the RearView Monitor on, select the item key and adju[...]

With the ignition switch in the ON position, press the CAMERA button on the center multi- function control panel or move the shift lever to the “R” (Reverse) position to operate the Around View Monitor. The monitor displays various views of the position of the vehicle. Available views: . Bird’s-Eye View The surrounding view of the vehicle. . [...]

4-32 Monitor, heater, air conditioner, audio, phone and voice recognition systems . The cameras are installed above the front grille, the outside mirrors and above the rear license plate. Do not put anything on the cameras. . When washing the vehicle with highpressure water, be sure not to spray it around the cameras. Other- wise, water may enter t[...]

SAA1840 Front view SAA1896 Rear view Front and rear view Guiding lines, which indicate the vehicle width and distances to objects with reference to the vehicle body line * A , are displayed on the monitor. Distance guide lines: Indicate distances from the vehicle body. . Red line * 1 : approx. 1.5 ft (0.5 m) . Y ellow line * 2 : approx. 3 ft (1 m) [...]

4-34 Monitor, heater, air conditioner, audio, phone and voice recognition systems about 90 degrees or more, the predic- tive course line is displayed only on the opposite side of the turn. JVH0337X Bird’s-eye view The bird’s-eye view shows the overhead view of the vehicle which helps confirm the vehicle position and the predicted course to a pa[...]

. Use the displayed lines and the bird’s-eye view as a reference. The lines and the bird’s- eye view are greatly affected by the number of occupants, fuel level, vehicle position, road condition and road grade. SAA3571 Front-side view Guiding lines: Guiding lines that indicate the width and the front end of the vehicle are displayed on the moni[...]

4-36 Monitor, heater, air conditioner, audio, phone and voice recognition systems JVH0168X DIFFERENCE BETWEEN PREDICTIVE AND ACTUAL DIST ANCES Backing up on a steep uphill When backing up the vehicle up a hill, the distance guide lines and the vehicle width guide lines are shown closer than the actual distance. For example, the display shows 3 ft ([...]

the hill is viewed in the monitor closer than it appears. SAA2021 Backing up near a projecting object The predictive course lines * A do not touch the object in the display . However, the vehicle may hit the object if it projects over the actual backing up course. JVH1026X Backing up behind a projecting object The position * C is shown further than[...]

4-38 Monitor, heater, air conditioner, audio, phone and voice recognition systems course. HOW T O SWIT CH THE DISPLA Y With the ignition switch in the ON position, press the CAMERA button or move the shift lever to the R (Reverse) position to operate the Around View Monitor. When the rear view is displayed on the left side on the screen, the view o[...]

is not displayed on the screen when in this view. WARNING . The MOD system is not a substitute for proper vehicle operation and does not prevent contact with the objects surrounding the vehicle. When maneuvering, always use the outside mirror and inside rearview mirror and turn and look to check the surroundings to make sure it is safe to maneuver.[...]

4-40 Monitor, heater, air conditioner, audio, phone and voice recognition systems . When the ignition switch is placed in the OFF position and then back to the ON position. WARNING . Do not use the MOD system when towing a trailer. The system may not function properly. . Excessive noise (for example, audio system volume or open vehicle window) will[...]

the camera, wipe with a cloth dam- pened with a diluted mild cleaning agent and then wipe with a dry cloth. . Do not damage the camera as the monitor screen may be adversely affected. . The screen displayed on the Around View Monitor will automatically return to the previous screen when no operation takes place for 3 minutes after the CAMERA button[...]

4-42 Monitor, heater, air conditioner, audio, phone and voice recognition systems SAA3676 Side SIDE VENTILA T ORS Open/close the ventilators by moving the control dial * 1 to either direction. : This symbol indicates that the ventilators are closed. Moving the side control to this direction will close the ventilators. : This symbol indicates that t[...]

even if the engine is turned off and the ignition switch is in the ON position. NOTE: . Odors from inside and outside the vehicle can build up in the air condi- tioner unit. Odor can enter the passen- ger compartment through the vents. . When parking, set the heater and air conditioner controls to turn off air recirculation to allow fresh air into [...]

4-44 Monitor, heater, air conditioner, audio, phone and voice recognition systems SAA3596 1. T emperature control buttons 2. “ ” air recirculation button 3. “ ” outside air circulation button 4. “ FRONT” front defroster button 5. Display 6. “ REAR” rear window defroster button (See “Rear window and outside mirror defroster switch?[...]

Air recirculation: Push the air recirculation “ ” button to recirculate interior air inside the vehicle. The indicator light on the air recirculation “ ” button will illuminate. The air recirculation mode cannot be activated when the air conditioner is in the front defrosting mode. Outside air circulation: Push the outside air circulation ?[...]

4-46 Monitor, heater, air conditioner, audio, phone and voice recognition systems 3. Push the fan speed control buttons to set the desired fan speed. 4. Push the A/C button on. (The A/C indicator light will illuminate.) 5. Push the temperature control buttons to set the desired temperature between the middle and the cool position. . For quick cooli[...]

flow mode. : The air outlet is fixed at foot level. : The air outlet is fixed at both the head and foot level. : The air outlet is fixed at the head level. NOTE: Pushing the “A/C” button when the rear air conditioning system is turned on and “REAR” does not appear on the display will turn off the rear air conditioning system (except when th[...]

4-48 Monitor, heater, air conditioner, audio, phone and voice recognition systems front display) . “OFF” button: T urns off the rear air conditioning system. “ ” Fan speed control buttons: Adjust rear fan speed “MODE” button: Changes the rear air flow “TEMP” buttons: Adjust the rear temperature I n f o r m a t i o n P r o v i d e d [...]

SAA3595 1. T emperature control buttons (driver side) 2. “ ” air recirculation button 3. “ AUT O” auto-recirculation button (models with Advanced Climate Control System)/“ ” Outside air circulation button (models without Advanced Climate Control System) 4. “ FRONT” front defroster button 5. Display 6. “ REAR” rear window defrost[...]

4-50 Monitor, heater, air conditioner, audio, phone and voice recognition systems — Pushing the “DUAL ” button allows the user to independently change the front passenger’s side temperature with the passenger side temperature control but- tons (“ ” and “ ”) . (“DUAL ” will appear on the display.) T o cancel the separate temperat[...]

button (the one with the indicator light on) for more than 2 seconds to set the automatic control between the air recir- culation and outside air circulation modes. (The “ ”o r“ ” indicator light will blink twice.) The following conditions need to be met for the automatic air intake control mode to function properly. . The air flow control [...]

4-52 Monitor, heater, air conditioner, audio, phone and voice recognition systems button will illuminate. The air recirculation mode cannot be activated when the air conditioner is in the front defrosting mode. Outside air circulation: . Models with Advanced Climate Control System: Push the air recirculation “ ” button twice to draw outside air[...]

interior trim. When the air conditioner is turned on, the system generates Plasmacluster  ions automa- tically. “The high-density Plasmacluster  ions gener- ated in the air conditioner’s air stream not only suppress airborne bacteria and reduce the adherence of odors to the interior trim, but also have a proven skin moisture preserving ef[...]

4-54 Monitor, heater, air conditioner, audio, phone and voice recognition systems Manual operation: T o operate the rear air conditioning system using the front air conditioner control panel, push “REAR” button (the indicator light on the “REAR” button will illuminate and “ ” will appear on the display) . . T emperature control Push the[...]

Rear control buttons: The rear seat passengers can adjust the rear automatic air conditioning system using the control switches located on the ceiling above the rear seats (models with NISSAN mobile entertainment system) or on the upper left side of the second row seat (models without NISSAN mobile entertainment system) . The rear control buttons d[...]

4-56 Monitor, heater, air conditioner, audio, phone and voice recognition systems AUDIO OPERA TION PRECAUTION S Radio Push the ignition switch to the ACC or ON position and push the radio band select button to turn on the radio. If you listen to the radio with the engine not running, the ignition switch should be pushed to the ACC position. Radio r[...]

Static and flutter: During signal interference from buildings, large hills or due to antenna position, usually in conjunction with increased distance from the station transmitter, static or flutter can be heard. This can be reduced by lowering the treble setting to reduce the treble response. Multipath reception: Because of the reflective character[...]

4-58 Monitor, heater, air conditioner, audio, phone and voice recognition systems . During cold weather or rainy days, the player may malfunction due to the humidity . If this occurs, remove the CD and dehumidify or ventilate the player completely. . The player may skip while driving on rough roads. . The CD player sometimes cannot function when th[...]

or ventilate the player completely. . The player may skip while driving on rough roads. . The CD/DVD player sometimes cannot function when the passenger compartment temperature is extremely high. Decrease the temperature before use. . Only use high quality 4.7 in (12 cm) round discs that have the “COMPACT disc DIGI- T AL AUDIO” or “DVD Video?[...]

4-60 Monitor, heater, air conditioner, audio, phone and voice recognition systems . D TS and DTS 2.0 “ ” are registered trademarks of DTS, Inc. Parental level (parental control) : DVDs with the parental control setting can be played with this system. Please use your own judgement to set the parental control with the system. Disc selection: The [...]

. An incorrect song title may appear when the Play Mode is changed while using an iPod nano  (2nd Generation) . Audiobooks may not play in the same order as they appear on an iPod  . . Large video files cause slow responses in an iPod  . The vehicle center display may momentarily black out, but will soon recover. . If an iPod  automatic[...]

4-62 Monitor, heater, air conditioner, audio, phone and voice recognition systems SAA2494 Playback order: . The folder names of folders not containing compressed audio files are not shown in the display. . If there is a file in the top level of a disc/USB, “Root Folder” is displayed. . The playback order is the order in which the files were wri[...]

Specification chart (for FM-AM Radio with Compact Disc (CD) Player) : Supported media CD, CD-R, CD-RW Supported file systems ISO9660 LEVEL1, ISO9660 LEVEL2, Romeo, Joliet * ISO9660 Level 3 (packet writing) is not supported. * Files saved using the Live File System Component (on a Windows Vista-based computer) are not supported. Supported versions*1[...]

4-64 Monitor, heater, air conditioner, audio, phone and voice recognition systems Specification chart (for FM-AM-SA T radio with Compact Disc (CD) player (T ype A)) : Supported media CD, CD-R, CD-RW Supported file systems ISO9660 LEVEL1, ISO9660 LEVEL2, Apple ISO, Romeo, Joliet * ISO9660 Level 3 (packet writing) is not supported. Supported versions[...]

Specification chart (for FM-AM-SA T Radio with Compact Disc (CD) Player (T ype B)) : Supported media CD, CD-R, CD-RW , USB2.0 Supported file systems CD, CD-R, CD-RW: ISO9660 LEVEL1, ISO9660 LEVEL2, Romeo, Joliet * ISO9660 Level 3 (packet writing) is not supported. * Files saved using the Live File System component (on a Windows Vista-based computer[...]

4-66 Monitor, heater, air conditioner, audio, phone and voice recognition systems T roubleshooting guide: Symptom Cause and Countermeasure Cannot play Check if the disc or USB device was inserted correctly. Check if the disc is scratched or dirty. Check if there is condensation inside the player, and if there is, wait until the condensation is gone[...]

Compressed Video Files (if so equipped) Explanation of terms: . DivX  - DivX  refers to the DivX  codec owned by DivX, Inc. used for a lossy compression of video based on MPEG-4. . AVI - AVI stands for Audio Video Interleave. It is a standard file format originated by Microsoft Corporation. A “.divx” encoded file can be saved into the [...]

4-68 Monitor, heater, air conditioner, audio, phone and voice recognition systems Bluetooth  Audio player (if so equipped) Bluetooth  is a trademark owned by Bluetooth SIG, Inc. and li- censed to Visteon Corporation and Clarion Co., Ltd. . Some Bluetooth  audio devices may not be recognized by the in-vehicle audio system. . It is necessary[...]

JVH0335X 1. TRACK button 2. SEEK button 3. CD EJECT button 4. Display 5. Radio memory buttons 6. SCAN button 7. DISP (Display) button 8. RPT (Repeat)·RDM (Random) button 9. VOL (volume) control knob/Power button 10. FM button 11. AM button 12. CD button 13. AUX (Auxiliary) button 14. AUX (Auxiliary) IN jack 15. TUNE·FOLDER knob/MENU button FM-AM [...]

4-70 Monitor, heater, air conditioner, audio, phone and voice recognition systems Clock setting: T urning the clock ON/OFF: 1. Push the MENU button until “Clock: ON” or “Clock: OFF” is displayed. 2. T urn the TUNE·FOLDER knob to toggle between “Clock: ON” and “Clock: OFF” . Adjusting the clock: 1. T urn on the clock. 2. Push the ME[...]

Compact Disc (CD) player operation Place the ignition switch in the ACC or ON position, and insert the CD into the slot with the label side facing up. The CD will be guided automatically into the slot and start playing. After loading the disc, the number of tracks on the disc will appear on the display. If the radio is already operating, it will au[...]

4-72 Monitor, heater, air conditioner, audio, phone and voice recognition systems JVH0970X 1. XM band select button 2. CD EJECT button 3. FM·AM band select button 4. MEDIA button 5. Color display 6. iPod  MENU button 7. Radio CA T (category)/REW (rewind) button for SEEK/TRACK 8. Radio SCAN tuning button 9. Radio CA T (category)/FF (fast forward[...]

Audio main operation The audio system operates when the ignition switch is placed in the ON or ACC position. Head unit: The auto loudness circuit enhances the low and high frequency ranges automatically in both radio reception and CD playback. Power button / VOL (volume) control knob: Push the Power button/VOL (volume) control knob to turn on and o[...]

4-74 Monitor, heater, air conditioner, audio, phone and voice recognition systems . Language Select The language settings can be changed. Select “Language Select” using the TU- NE·SCROLL control knob and then push the ENTER/SETTING button. Use the TU- NE·SCROLL control knob knob to select the preferred language. DISP button: Display of the sc[...]

station. to Station memory operations: 12 stations can be set for the FM band (6 each for FM1 and FM2) and 6 stations can be set for the AM band. 1. Choose the radio band using the FM·AM button. 2. T une to the desired station using the SEEK·TRACK, SCAN button or the TU- NE·SCROLL control knob. 3. Push and hold the desired station preset button [...]

4-76 Monitor, heater, air conditioner, audio, phone and voice recognition systems If the CD comes out and is not removed, it will be pulled back into the slot to protect it. USB memory operation WARNING Do not connect, disconnect or operate the USB device while driving. Doing so can be a distraction. If distracted you could lose control of your veh[...]

memory is inserted, push the MEDIA button repeatedly until the center display changes to the USB memory mode. Next/Previous File and Fast Forward/Rewind: When the FF or REW button is pushed for more than 1.5 seconds while a USB memory is being played, the USB memory will play while for- warding or rewinding. When the button is released, the USB mem[...]

4-78 Monitor, heater, air conditioner, audio, phone and voice recognition systems JVH1032X Connecting iPod  : The USB connection port is located in the center console. Open the lid and connect the iPod  cable to the USB connector. The battery of the iPod  is charged while the connection to the vehicle. Depending on the version of the iPod [...]

operational. T o select an item, push ENTER. Items in the iPod  menu appear on the display in the following order. . Now Playing . Playlists . Artists . Albums . Songs . Podcasts . Genres . Composers . Audiobooks . Shuffle Songs For more information about each item, see the iPod  Owner’s Manual. Next/Previous T rack and Fast Forward/Rewind:[...]

4-80 Monitor, heater, air conditioner, audio, phone and voice recognition systems JVH0620X 2. Select the “Bluetooth” key. 3. Select the “ Add Phone” key. This same screen can be accessed to remove, replace or select a different Bluetooth  device. 4. The system acknowledges the command and asks you to initiate connecting from the Bluetoot[...]

device to the audio system. Music may not play properly when a monaural cable is used. JVH0174X 1. ON·OFF button/VOL (volume) control knob 2. Radio station preset buttons 3. AUDIO control button/Radio tuning/FOLDER selector knob 4. FM·AM band select button 5. Radio SCAN (tuning) button 6. Radio CA T (category)/REW (rewind) button for SEEK/TRACK 7[...]

4-82 Monitor, heater, air conditioner, audio, phone and voice recognition systems FM-AM-SA T RADIO WITH COMP ACT DISC (CD) PLA YER (T ype B) For all operation precautions, see “Audio opera- tion precautions” (P .4-56) . The satellite radio mode requires an active SiriusXM Satellite Radio subscription. The sa- tellite radio is not available in A[...]

TUNE (T uning) : . For AM and FM radio T urn the radio TUNE knob for manual tuning. . For SiriusXM Satellite Radio T urn the radio TUNE knob to seek channels from all of the categories when any category is not selected. or / SEEK tuning/CA TE- GOR Y (CAT): . For AM and FM radio Push the SEEK button or to tune from low to high or high to low frequen[...]

4-84 Monitor, heater, air conditioner, audio, phone and voice recognition systems . Favorite Artists & Songs Stores the current artist or song that is being played. T ouch the “ Alert” key to be reminded when the stored artist or song is playing on a station while listening to SiriusXM Satellite Radio. . Categories Selecting a category will[...]

— 1 T rack Repeat — 1 Disc Random — 1 Folder Random (CD with compressed audio files) T ext (models without navigation system) : When the “T ext” key is selected in the screen using the multi-function controller and then the ENTER button is pushed while the CD is being played, the music information below will be displayed on the screen. CD[...]

4-86 Monitor, heater, air conditioner, audio, phone and voice recognition systems CAUTION . Only operate the DVD while the vehicle engine is running. Operating the DVD for extended periods of time with the engine OFF can dis- charge the vehicle battery. . Do not allow the system to get wet. Excessive moisture such as spilled liquids may cause the s[...]

PAUSE: Select the “ ” key to pause the DVD. T o resume playing the DVD, use the “PLA Y” key. PLA Y: Select the “ ” key to start playing the DVD, for example, after pausing the DVD. STOP: Select the “ ” key to stop playing the DVD. / Next/Previous Chapter: Select the “ ”o r“ ” key to skip the chapter(s) of the disc forward/ba[...]

4-88 Monitor, heater, air conditioner, audio, phone and voice recognition systems number entry screen. Input the number to be searched and select the “OK” key . The specified Title/Chapter or Group/T rack will be played. Select No. (VIDEO-CD) : Select the “Select No.” key to open the number entry screen. Input the number to be searched and [...]

SAA3599 USB MEMORY OPERA TION (models with center multi-funct ion control panel) Audio main operation The USB connection port is located in the center console. Open the USB port cover and connect a USB memory as illustrated. Then, push the DISC·AUX button repeatedly to switch to the USB memory mode. If the system has been turned off while the USB [...]

4-90 Monitor, heater, air conditioner, audio, phone and voice recognition systems SAA2500 File selection (models with navigation system) When there are both audio and movie files in the USB memory, the mode select screen is displayed. Select the preferred content to play. When there is only one type of file, the audio or movie operation screen is d[...]

Folder selection: T o change to another folder on the USB memory, turn the FOLDER selector or choose a folder displayed on the screen using the multi- function controller. REPEA T (RPT) , RANDOM (RDM) : When the RPT/RDM button is pushed while the USB memory is played, the play pattern can be change as follows. T o change the play mode, push the RPT[...]

4-92 Monitor, heater, air conditioner, audio, phone and voice recognition systems SAA2503 Movie file operation (models with navi- gation system) Park the vehicle in a safe location for the front seat occupants to operate the USB memory while watching the images. PLA Y: When the DISC·AUX button is pushed with the system off and the USB memory inser[...]

SAA2504 Example Settings: Select the “Settings” key to adjust the following settings. . Audio File Playback Switch to the audio playback mode. This item is displayed only when the USB memory contains audio files. . Play Mode Select the “Normal” or “1 T rack Repeat” play mode. . 10 Key Search Select the “10 Key Search” key to open th[...]

4-94 Monitor, heater, air conditioner, audio, phone and voice recognition systems be operated by the vehicle audio controls. *i P o d  is a trademark of Apple Inc., registered in the U.S. and other countries. WARNING Do not connect, disconnect or operate the USB device while driving. Doing so can be a distraction. If distracted you could lose co[...]

will turn on. If another audio source is playing and the iPod  is connected, push the DISC·AUX button repeatedly until the center display changes to the iPod  mode. Interface: The interface for iPod  operation shown on the vehicle center display is similar to the iP od  interface. Use the multi-function controller and the ENTER or BACK[...]

4-96 Monitor, heater, air conditioner, audio, phone and voice recognition systems Bluetooth  functions. Regulatory information FCC Regulatory information: . CAUTION: T o maintain compliance with FCC’s RF exposure guidelines, use only the supplied antenna. Unauthorized antenna, modification, or attachments could damage the transmitter and may v[...]

SAA2506 2. Select the “Connect Bluetooth” key. SAA2507 3. A confirmation screen will be displayed. Select “No” . Note: Selecting “Y es” will only connect the hands free phone portion of a Bluetooth  device. SAA3005 4 . Choose a PIN code to use with the compatible Bluetooth  audio device using the number input screen. The PIN code [...]

4-98 Monitor, heater, air conditioner, audio, phone and voice recognition systems SAA3006 5. The standby message screen will appear. Operate the compatible Bluetooth  audio device. For the connecting procedure of the audio device, see the Bluetooth  audio instructions. When the connecting is completed, the screen will return to the Bluetooth [...]

REPEA T (RPT) , RANDOM (RDM) : T o change the play mode, push the button repeatedly and the mode changes as follows. Normal ? Shuffle All Tracks ? Shuffle Group ? Repeat 1 T rack ? Repeat All T racks ? Repeat Group ? Normal Operation keys: T o operate a Bluetooth  audio device, select a key displayed on the operation screen using the multi-funct[...]

4-100 Monitor, heater, air conditioner, audio, phone and voice recognition systems Connected Devices: Registered devices are shown on the list. Select a Bluetooth  device from the list, the following options will be available. . Select Select “Select” to connect the selected device to the vehicle. If there is a different device currently con[...]

SAA2496 Models with navigation system JVH0185M Models without navigation system AUX Menu When the “Menu” key on the display is selected while in the AUX mode, the menu screen will be displayed. Display Mode: Choose the display mode from the following items. . Normal . Wide . Cinema Volume Settings (models with navigation system) : Choose the vo[...]

4-102 Monitor, heater, air conditioner, audio, phone and voice recognition systems . A new disc may be rough on the inner and outer edges. Remove the rough edges by rubbing the inner and outer edges with the side of a pen or pencil as illustrated. USB memory . Do not touch the terminal portion of the USB memory. . Do not place heavy objects on the [...]

STEERING-WHEEL -MOUNTED CON- TROLS FOR AUDIO (if so equipped) Menu control switch (models with navi- gation system) or audio tuning switch (models without navigation system) While the display is showing a MAP (navigation systems only) , ST A TUS or Audio screen, tilt the switch upward or downward to select a station, track, CD or folder. For most a[...]

4-104 Monitor, heater, air conditioner, audio, phone and voice recognition systems V olume control switches Push the upper (+) or lower ( í ) side switch to increase or decrease the volume. SOURCE select switch Push the source select switch to change the mode to available audio source. ANTENNA Window antenna The antenna pattern is printed inside t[...]

. Use a damp, soft cloth when clean- ing the Mobile Entertainment Sys- tem components. Do not use solvents or cleaning solutions. . Do not attempt to use the system in extreme temperature conditions [below í 4 8 F ( í 20 8 C) or above 158 8 F (70 8 C)]. . T o avoid discharging the vehicle battery , do not operate the system more than 15 minutes w[...]

4-106 Monitor, heater, air conditioner, audio, phone and voice recognition systems components. Do not use solvents or cleaning solutions. . Be sure to stow the rear display when it is not used. SAA3655 Flip-down screen Use the remote controller to operate the motorized flip-down rear display screen. 1. Push the REAR DISPLA Y OPEN/CLOSE button on th[...]

SAA3608 Power ON/OFF: Push the POWER button to turn the head- phones on or off. SAA3609 Volume control: T urn the volume control knob to adjust the volume. The headphones will automatically be turned off within approximately 5 minutes if there is no infrared signal input during that period. T o prevent the battery from being discharged, keep the po[...]

4-108 Monitor, heater, air conditioner, audio, phone and voice recognition systems SAA3610 Models with navigation system SAA3704 Models without navigation system Remote controller The remote controller has the following controls: . Models with navigation system 1) REAR DISPLA Y OPEN/CL OSE button 2) DVD button 3) Joystick 4) AUX button 5) ENTER but[...]

5) ENTER button 6) DISP button 7) SPEAKER VOLUME CONTROL button ( or ) 8) TRACK/CHANNEL button ( or ) 9) DISPLA Y TIL T button ( or ) 10) BACK button 11) SOUND button 12) Keypad See “Remote controller operation” (P .4-114) for the function of each buttons. SAA0978 Remote controller SAA3611 Headphones Remote controller and headphones bat- tery r[...]

4-110 Monitor, heater, air conditioner, audio, phone and voice recognition systems . When changing batteries, do not let dust or oil get on the remote control and headphones. FCC Notice: For USA: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interferen[...]

SAA2497 Front screen (models with navigation system) SAA3091 Front screen (models without navigation system) SAA3656 Rear display PLA YING A DVD DISC·AUX button Park the vehicle in a safe location for the front seat occupants to operate the DVD drive while watching the images. Insert a DVD into the CD/DVD slot with the labeled side up. The DVD wil[...]

4-112 Monitor, heater, air conditioner, audio, phone and voice recognition systems return to the previous display. DVD operation keys T o operate the DVD drive, select the desired key displayed on the operation screen using the multi-function controller. PAUSE: Select the “ ” key to pause the DVD. T o resume playing the DVD, use the “PLA Y”[...]

SAA3087 Front screen (models without navigation system) SAA3657 Rear screen (models without navigation system) Setting keys Select the “Settings” key with the multi-function controller and push the ENTER button to adjust the following settings. The items indicated with “ * ” can also be set from the rear display. Push the “ DVD” button [...]

4-114 Monitor, heater, air conditioner, audio, phone and voice recognition systems CM Skip (DVD-VIDEO) (models with navi- gation system) : The number of seconds for CM Skip can be set to 15, 30 or 60 seconds. DRC (DVD-VIDEO) : DRC (Dynamic Range Compression) allows tuning of the dynamic range of sound recorded in the Dolby Digital format. DVD Langu[...]

Keypad: : PLA Y/PAUSE button : ST OP button : FORW ARD button : REWIND button : FORW ARD button for commercial skip (for DVD-VIDEO and DVD-VR) : REWIND button for commercial skip (for DVD-VIDEO and DVD-VR) Rear display settings T o adjust rear display setting, select the preferred key and push the ENTER button. The following settings are available:[...]

4-116 Monitor, heater, air conditioner, audio, phone and voice recognition systems When installing a car phone or a CB radio in your vehicle, be sure to observe the following cautions, otherwise the new equipment may adversely affect the electronic control modules and electronic control system harness. WARNING . A cellular phone should not be used [...]

with your cellular phone in your pocket. Once a cellular phone is connected to the in- vehicle phone module, no phone connecting procedure is required anymore. Y our phone is automatically connected with the in-vehicle phone module when the ignition switch is pushed to the ON position with the registered cellular phone turned on and carried in the [...]

4-118 Monitor, heater, air conditioner, audio, phone and voice recognition systems . If reception between callers is unclear, adjusting the incoming or outgoing call volume may improve the clarity. REGULA T ORY INFORMA TION FCC Regulatory information . CAUTION: T o maintain compliance with FCC’s RF exposure guidelines, use only the supplied anten[...]

JVH0473X CONNECTING PROCEDURE 1 . Push the button, and select the “Connect Phone” key. SAA2520 2. When a PIN code appears on the screen, operate the compatible Bluetooth  cellular phone to enter the PIN code. The connecting procedure of the cellular phone varies according to each cellular phone. See the cellular phone Owner’s Manual for th[...]

4-120 Monitor, heater, air conditioner, audio, phone and voice recognition systems JVH0474X 1. Push the button and select the “Quick Dial” key. 2. Select the “ Add New” key at the top of the screen. JVH0475X 3. Choose the method for entering the phone- book entry . For this example, select “Enter Number by Keypad” . 4. Input the name an[...]

instead of “Enter Number by K eypad” in step 3. . Copy from Call History The system will show a list of incoming, outgoing or missed calls that were down- loaded from the connected cellular phone (depending on the phone’s compatibility) . Select one of these entries to save in the Quick Dial. . Copy from the Handset The system will show the c[...]

4-122 Monitor, heater, air conditioner, audio, phone and voice recognition systems allow easy dialing using the NISSAN V oice Recognition system. (See “NISSAN voice recognition system (models with navigation system)” (P .4-148) .) T o delete an entry, select the “Delete” key at step 3. JVH0479X MAKING A CALL T o make a call, follow this pro[...]

SAA2525 RECEIVING A CALL When you hear a phone ring, the display will change to the incoming call mode. T o receive a call, perform one of the following procedures listed below. a) Select the “ Answer” key . b) Push the button on the steering wheel. There are some options available when receiving a call. Select one of the following displayed on[...]

4-124 Monitor, heater, air conditioner, audio, phone and voice recognition systems . Cancel Mute This will appear after “Mute” is selected. Mute will be canceled. . Switch Call* Select “Switch Call” to answer another incoming call. By selecting “Hang up” , you can end a call and can speak to a caller who is on hold again. * This functio[...]

Auto Downloaded When this item is activated, the phonebook of a hands-free phone is automatically downloaded at the same time that the hands-free phone is connected. Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-125 I n f o r m a t i o n P r o v i d e d b y :[...]

4-126 Monitor, heater, air conditioner, audio, phone and voice recognition systems TROUBLESHOO TING GUIDE The system should respond correctly to all voice commands without difficulty. If problems are encountered, try the following solutions. Where the solutions are listed by number, try each solution in turn, starting with number 1, until the probl[...]

* T ype B is models without navigation system/without text message function. WARNING . Use a phone after stopping your vehicle in a safe location. If you have to use a phone while driving, exercise extreme caution at all times so full attention may be given to vehicle operation. . If you find yourself unable to devote full attention to vehicle oper[...]

4-128 Monitor, heater, air conditioner, audio, phone and voice recognition systems . Y ou will not be able to use a hands-free phone under the following conditions: — Y our vehicle is outside of the telephone service area. — Y our vehicle is in an area where it is difficult to receive radio waves; such as in a tunnel, in an underground parking [...]

Bluetooth trademark: Bluetooth  is a trademark owned by Bluetooth SIG, Inc., and licensed to Visteon Corporation. USING THE SY STEM The NISSAN Voice Recognition system allows hands-free operation of the Bluetooth  Hands- Free Phone System. If the vehicle is in motion, some commands may not be available so full attention may be given to vehicl[...]

4-130 Monitor, heater, air conditioner, audio, phone and voice recognition systems — “One eight zero zero six six two six two oh oh” . Words can be used for the first 4 digits places only. Example: 1-800-662-6200 — “One eight hundred six six two six two oh oh”, — NO T “One eight hundred six six two sixty two hundred, and — NO T ?[...]

SAA1858 CONTROL BUTT ONS The control buttons for the Bluetooth  Hands- Free Phone System are located on the steering wheel. PHONE SEND Push the button to initiate a V oice Recognition (VR) session or answer an incom- ing call. Y ou can also use the button to interrupt system feedback and give a command at once. PHONE END While the voice recognit[...]

4-132 Monitor, heater, air conditioner, audio, phone and voice recognition systems 1. Push the button on the steering wheel. The system announces the available com- mands. 2. Say: “Connect Phone” * A . The system acknowledges the command and an- nounces the next set of available commands. 3. Say: “ Add phone” * B . The system acknowl- edges[...]

LIST OF VOICE COMMANDS When you push and release the button on the steering wheel, you can choose from the commands on the Main Menu. The following pages describe these commands and the commands in each sub-menu. Remember to wait for the tone before speaking. Y ou can say “Help” to hear the list of commands currently available anytime the syste[...]

4-134 Monitor, heater, air conditioner, audio, phone and voice recognition systems commands. . “Help” — The system announces the avail- able commands. . “Go back/Correction” — The system an- nounces “Go back,” ends the VR session and returns to the call. . “Cancel/Quit” — The system announces “Cancel,” ends the VR session [...]

number. “Delete Entry” * B Use the Delete Entry command to delete one entry from the phonebook. After the system acknowledges a command, say the name to delete or say “List Names” to choose an entry . “List Names” * C Use the List Names command to hear all the names in the phonebook. The system recites the phonebook entries but does not[...]

4-136 Monitor, heater, air conditioner, audio, phone and voice recognition systems “Previous Name” * D Use the Previous Name command to move the previous name of list. Recent Calls Use the Recent Calls command to access outgoing, incoming or missed calls. “Outgoing” * A Use the Outgoing command to list the outgoing calls made from the vehic[...]

T raining procedure 1. Position the vehicle in a reasonably quiet outdoor location. 2. Sit in the driver’s seat with the engine running, the parking brake on, and the transmission in Park. 3. Press and hold the button for more than 5 seconds. 4. The system announces: “Press the PHONE SEND ( ) button for the hands-free phone system to enter the [...]

4-138 Monitor, heater, air conditioner, audio, phone and voice recognition systems . go back . call 5 6 2 8 0 . dial 6 6 4 3 7 I n f o r m a t i o n P r o v i d e d b y :[...]

TROUBLESHOO TING GUIDE The system should respond correctly to all voice commands without difficulty. If problems are encountered, try the following solutions. Where the solutions are listed by number, try each solution in turn, starting with number 1, until the problem is resolved. Symptom Solution The system fails to interpret the command correctl[...]

4-140 Monitor, heater, air conditioner, audio, phone and voice recognition systems * T ype C is models without navigation system/with text message function. WARNING . Use a phone after stopping your vehicle in a safe location. If you have to use a phone while driving, exercise extreme caution at all times so full attention may be given to vehicle o[...]

. If the hands-free phone system seems to be malfunctioning, see “T roubleshooting guide” in this section. Y ou can also visit www. nissanusa.com/bluetooth for troubleshoot- ing help. . Some cellular phones or other devices may cause interference or a buzzing noise to come from the audio system speakers. Storing the device in a different locati[...]

4-142 Monitor, heater, air conditioner, audio, phone and voice recognition systems quit the voice recognition system at any time. Microphone: Microphone is located near the map lights. Manual control: While using the V oice Recognition system, it is possible to select menu options by using the steering wheel controls instead of speaking voice comma[...]

is said exactly as prompted by the system and repeat the command in a clear voice. . If you want to go back to the previous command, you can say “Go back” or “Correction” any time the system is waiting for a response. . Y ou can cancel a command when the system is waiting for a response by saying, “Cancel” or “Quit.” The system anno[...]

4-144 Monitor, heater, air conditioner, audio, phone and voice recognition systems number. Say “Record Name” to record a name for the phonebook entry. Say “Delete Recording” to delete a recorded name for the phonebook entry. . List Names Speak this command to have the system list the names in the phonebook one by one alphabetically. Say “[...]

Making a call T o make a call from a phone connected to the vehicle’s Bluetooth  Hands-Free Phone Sys- tem: 1. Push the button. 2. The system will prompt you for a command. Say “Call” . 3. Select one of the available voice commands to continue: . (A Name) Speak the name of a phonebook entry to place a call to that entry. The system will re[...]

4-146 Monitor, heater, air conditioner, audio, phone and voice recognition systems . Switch Call Speak this command to hold the second call and switch back to the original call. . End Other Call Speak this command to stay with the second call and end the original call. Push the button to accept the call. Push the button to reject the call. Ending a[...]

Reading a received text message: 1. Push the button. 2. Say “Messaging”. 3. Say “Read T ext”. The text message, sender and delivery time are shown on the screen. Use the tuning switch on the steering wheel to scroll through all text messages if more than one are available. Push the button to exit the text message screen. Push the button to [...]

4-148 Monitor, heater, air conditioner, audio, phone and voice recognition systems incoming text messages. . Edit Custom Messages Select to set a custom message that will be available with the standard options when sending a text message. T o set a custom message, send a text message to your own phone number while the phone is connected to the syst[...]

SAA3008 Activating Standard Mode When the Alternate Command Mode is active, perform the following steps to switch to the Standard Mode. 1. Push the SETTING button on the instrument panel. 2. Select the “Others” key. 3. Select the “Voice Recognition” key . SAA2530 4. Select the “Alternate Command Mode” key . 5. The indicator turns off an[...]

4-150 Monitor, heater, air conditioner, audio, phone and voice recognition systems . Let’s Practice Mode that allows practicing by following the instructions of the system voice. . Using the Address Book T utorial for entering a destination by using the Address Book. . Finding a Street Address (if so equipped) T utorial for entering a destination[...]

SAA2533 Useful tips for correct operation Y ou can display useful speaking tips to help the system recognize your voice commands cor- rectly. Select “Help on Speaking” to start display. USING THE SY STEM Initialization When the ignition switch is pushed to the ON position, NISSAN Voice Recognition is initia- lized, which may take up to one minu[...]

4-152 Monitor, heater, air conditioner, audio, phone and voice recognition systems Selecting the “ Help ” key can display the detailed information of the each command. Operating tips: . Say a command after the tone. . Commands that are available are always shown on the display and spoken through voice menu prompts. Commands other than those tha[...]

Command List Category Command: Command Action Call (Optional) Makes a call to a contact that is stored in either phonebook. Please say “Call” followed by a stored name. Phone Operates the Phone function. Navigation Operates the Navigation function. Information Displays the vehicle Information function. Audio Operates the Audio function. Help Di[...]

4-154 Monitor, heater, air conditioner, audio, phone and voice recognition systems . Navigation Command: Command Action Destination Home Sets a route to your home that is stored in the Address Book. Address Searches for a location by the street address specified, and sets a route to the location. Places Sets a route to a facility near the current v[...]

V oice command examples T o use the NISSAN Voice Recognition function, speaking one command is sometimes sufficient, but at other times it is necessary to speak two or more commands. As examples, some additional basic operations by voice commands are described here. For navigation system commands, see the separate Navigation System Owner’s Manual[...]

4-156 Monitor, heater, air conditioner, audio, phone and voice recognition systems SAA2537 4. Speak “8 0 0”. Selecting the “Manual Controls” key switches the screen to the keypad to input the phone number manually. SAA2538 5. The system announces, “Please say the next three digits or dial, or say change number.” 6. Speak “6 6 2”. SA[...]

SAA2540 9. The system announces, “Dial or Change Number?” 10. Speak “Dial” . 11. The system makes a call to 800-662-6200. Note: . Y ou can also speak “800-662-6200” (10 continuous digits) or “662-6200” (7 con- tinuous digits) , if the area code is not necessary. However, the 3-3-4 digit group- ing is recommended for improved recogni[...]

4-158 Monitor, heater, air conditioner, audio, phone and voice recognition systems JVH0481X 3. Speak “International Call”. SAA2541 4. Speak “011811112223333”. SAA2542 5. Speak “Dial”. 6. System makes a call to 011-81-111-222- 3333. Note: Any digit input format is available in the International Number input process. I n f o r m a t i o n[...]

NISSAN VOICE RECOGNITION AL - TERNA TE COMMAND MODE The following section is applicable when Alter- nate Command Mode is activated. When Alternate Command Mode is activated, an expanded list of commands can be used after pressing the T ALK switch. In this mode, available commands are not fully shown on the display or prompted. Review the expanded c[...]

4-160 Monitor, heater, air conditioner, audio, phone and voice recognition systems SAA2544 1. Push the INFO button on the instrument panel. 2. Select the “Others” key. 3. Select the “Voice Recognition” key . 4. Select the “Command List” key. SAA2545 5. Select a category from the list. JVH0483X 6. Select an item. 7. If necessary, scroll [...]

Command List Phone Commands: Command Action Dial Number Makes a call to a spoken phone number. Quick Dial Makes a call to a contact that is stored in the Quick Dial. Phonebook Makes a call to a contact that is stored in the mobile phone. Call History Incoming Calls Makes a call to the incoming call number. Outgoing Calls Makes a call to the dialed [...]

4-162 Monitor, heater, air conditioner, audio, phone and voice recognition systems Navigation Commands: Command Action Destination Home Sets a route to your home that is stored in the Address Book. Address Searches for a location by the street address specified, and sets a route to the location. Places Sets a route to a facility near the current ve[...]

Information Commands: Command Action Fuel Economy Displays fuel economy information. Maintenance Displays maintenance information. Where am I? Displays your current location. T raffic Information T urns the traffic information system ON and OFF. Weather Information Displays weather information. Weather Map Displays a weather map. Monitor, heater, a[...]

4-164 Monitor, heater, air conditioner, audio, phone and voice recognition systems Audio Commands: Command Action CD Starts to play a CD. FM T urns to the FM band, selecting the station last played. AM T urns to the AM band, selecting the station last played. XM T urns to the SiriusXM Satellite Radio band, selecting the channel last played. USB T u[...]

SAA2547 Displaying user guide Y ou can confirm how to use voice commands by accessing a simplified User Guide, which contains basic instructions and tutorials for several voice commands. 1. Push the INFO button on the instrument panel. 2. Select the “Others” key using the multi- function controller and push the ENTER button. 3. Highlight the ?[...]

4-166 Monitor, heater, air conditioner, audio, phone and voice recognition systems . Speak in a natural voice without pausing between words. SAA1859 Giving voice command 1. Push and release the T ALK switch located on the steering wheel. 2. A list of commands appears on the screen, and you will hear a prompt. 3. After the tone sounds and the icon o[...]

— “Dial one eight zero zero six six two six two zero zero.” Note 1: For the best voice recognition phone dialing results, say phone numbers as single digits. Note 2: Y ou cannot say 555-6000 as “five five five six thousands” . Note 3: When speaking a house number, speak the number “0” as “ zero” . If the letter “o ( Oh)” is in[...]

4-168 Monitor, heater, air conditioner, audio, phone and voice recognition systems SAA2551 6. Select a category to be learned by the system from the following list. . Phone Commands . Navigation Commands . Information Commands . Audio Commands . Help Commands The voice commands in the category are displayed. 7. Select a voice command and then push [...]

Minimize voice feedback (for Alternate Command Mode) T o minimize the voice feedback from the system, perform the following steps. 1. Push the SETTING button on the instrument panel. 2. Select the “Others” key. 3. Select the “Voice Recognition” key . 4. Select the “Minimize Voice Feedback” key . 5. The setting is turned on and the voice[...]

4-170 Monitor, heater, air conditioner, audio, phone and voice recognition systems TROUBLESHOO TING GUIDE The system should respond correctly to all voice commands without difficulty. If problems are encountered, follow the solutions given in this guide for the appropriate error. Where the solutions are listed by number, try each solution in turn, [...]

5 Starting and driving Precautions when starting and driving ................................ 5-2 Exhaust gas (carbon monoxide) ...................................... 5-2 Three-way catalyst .............................................................. 5-3 Tire Pressure Monitoring System (TPMS) .................... 5-3 Avoiding collision and rollov[...]

5-2 Starting and driving WARNING . Do not leave children or adults who would normally require the support of others alone in your vehicle. Pets should not be left alone either. They could accidentally injure themselves or others through inadvertent op- eration of the vehicle. Also, on hot, sunny days, temperatures in a closed vehicle could quickly [...]

system, underbody, or rear of the vehicle. THREE-W A Y CA T AL Y ST The three-way catalyst is an emission control device installed in the exhaust system. Exhaust gases in the three-way catalyst are burned at high temperatures to help reduce pollutants. WARNING . The exhaust gas and the exhaust system are very hot. Keep people, animals or flammable [...]

5-4 Starting and driving pressure telltale. Y our vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly. The TPMS malfunction indicator is combined with the low tire pressure telltale. When the system detects a malfunction, the telltale will flash for approxi- mately one minute and th[...]

the low tire pressure warning light OFF. If the light still illuminates while driving after adjusting the tire pressure, a tire may be flat. If you have a flat tire, replace it with a spare tire as soon as possible. (See “Flat tire” (P .6-3) for changing a flat tire.) . When a spare tire is mounted or a wheel is replaced, the TPMS will not func[...]

5-6 Starting and driving TPMS with Easy Fill Tire Alert When adding air to an under-inflated tire, the TPMS with Easy Fill Tire Alert provides visual and audible signals outside the vehicle to help you inflate the tires to the recommended COLD tire pressure. Vehicle set-up: 1. Park the vehicle in a safe and level place. 2. Apply the parking brake a[...]

significantly more likely to be injured or killed than a person properly wearing a seat belt. OFF-ROAD RECOVERY If the right side or left side wheels leave the road surface, maintain control of the vehicle by following the procedure below. Please note that this procedure is only a general guide. The vehicle must be driven as appropriate based on th[...]

5-8 Starting and driving 6. T urn on the hazard warning flashers and either contact a roadside emergency service to change the tire or see “Changing a flat tire” (P .6-3) . DRINKING ALCOHOL/DRUGS AND DRIVING WARNING Never drive under the influence of alcohol or drugs. Alcohol in the blood- stream reduces coordination, delays reaction time and i[...]

SSD0436 OPERA TING RANGE FOR ENGINE ST ART FUNCTION The Intelligent Key functions can only be used for starting the engine when the Intelligent Key is within the specified operating range * 1 . When the Intelligent Key battery is almost discharged or strong radio waves are present near the operating location, the Intelligent Key system’s operatin[...]

5-10 Starting and driving until the shift lever is moved to the P (Park) position. When the ignition switch cannot be pushed toward the L OCK position, proceed as follows: 1. Move the shift lever into the P (Park) position. 2. Push the ignition switch to the OFF position. (The ignition switch position indicator will not illuminate.) 3. Open the doo[...]

SSD0944 INTELLIGENT KEY BA TTERY DIS- CHARGE If the battery of the Intelligent Key is discharged, or environmental conditions interfere with the Intelligent Key operation, start the engine according to the following procedure: 1. Move the shift lever to the P (Park) position. 2. Firmly apply the foot brake. 3. T ouch the ignition switch with the In[...]

5-12 Starting and driving 1. Apply the parking brake. 2. Move the shift lever to the P (Park) or N (Neutral) position. (P is recommended.) The starter is designed not to operate unless the shift lever is in either of the above positions. 3. Push the ignition switch to the ON position. Depress the brake pedal and push the ignition switch to start th[...]

CONTINUOUSL Y V ARIABLE TRANS- MISSION (CVT) The Continuously V ariable T ransmission (CVT) in your vehicle is electronically controlled to produce maximum power and smooth operation. The recommended operating procedures for this transmission are shown on the following pages. Follow these procedures for maximum vehicle performance and driving enjoy[...]

5-14 Starting and driving SSD1175 T o move the shift lever, : Push the button * A while depressing the brake pedal. : Push the button * A . : Just move the shift lever. Shifting After starting the engine, fully depress the brake pedal, push the shift lever button and move the shift lever from the P (Park) position to any of the desired shift positi[...]

SSD1176 Overdrive (O/D) OFF switch When the O/D OFF switch is pushed with the shift lever in the D (Drive) position, the indicator light in the instrument panel illuminates. Use the overdrive off mode when you need improved engine braking. T o turn off the overdrive off mode, push the O/D OFF switch again. The indicator light will turn off. Each ti[...]

5-16 Starting and driving SSD1177 Shift lock release If the battery charge is low or discharged, the shift lever may not be moved from the P (Park) position even with the brake pedal depressed and the shift lever button pushed. T o move the shift lever, perform the following procedure: 1. Push the ignition switch to the OFF or L OCK position. 2. Ap[...]

SP A2331 T o apply: Fully depress the parking brake pedal * 1 . T o release: 1. Firmly apply the foot brake * 2 . 2. Depress the parking brake pedal * 1 and the parking brake will be released. 3. Before driving, be sure the brake warning light goes out. WARNING . The BSW system is not a replace- ment for proper driving procedure and is not designed[...]

5-18 Starting and driving SSD1030 Detection zone The radar sensors can detect vehicles on either side of your vehicle within the detection zone shown as illustrated. This detection zone starts from the outside mirror of your vehicle and extends approximately 10 ft (3 m) behind the rear bumper, and approximately 10 ft (3 m) sideways. The BSW system [...]

ness of the ambient light. A chime sounds if the radar sensors have already detected a vehicle when the driver activates the turn signal. If a vehicle comes into the detection zone after the driver activates the turn signal, then only the BSW indicator light flashes and no chime sounds. (See “BSW driving situations” (P .5-20) .) The BSW system [...]

5-20 Starting and driving driving in a narrow lane, the radar sensors may detect vehicles driving two lanes away. . The radar sensors are designed to ignore most stationary objects, however objects such as guardrails, walls, foliage and parked vehicles may occasionally be detected. This is a normal operating condition. . Severe weather or road spra[...]

SSD1032 Illustration 3- Accelerate from a stop Illustration 3: NOTE: If you accelerate from a stop with a vehicle in the detection zone, the other vehicle may not be detected. SSD1033 Illustration 4 - Overtaking another vehicle Overtaking another vehicle Illustration 4: The BSW indicator light illumi- nates if you overtake a vehicle and that vehicl[...]

5-22 Starting and driving SSD1036 Illustration 6 Illustration 6: NOTE: When overtaking several vehicles in a row, the vehicles after the first vehicle may not be detected if they are traveling close together. SSD1037 Illustration 7 - Entering from the side Entering from the side Illustration 7: The BSW indicator light illumi- nates if a vehicle ent[...]

SSD1038 Illustration 8 - Entering from the side Illustration 8: If the driver activates the turn signal while another vehicle is in the detection zone, then the BSW indicator light flashes and a chime will sound twice. NOTE: If the driver activates the turn signal before a vehicle enters the detection zone, the BSW indicator light will flash but no[...]

5-24 Starting and driving PRECAUTIONS ON CRUISE CON- TROL . If the cruise control system malfunctions, it will cancel automatically. The CRUISE in- dicator light on the meter panel will then blink to warn the driver. . If the engine coolant temperature becomes excessively high, the cruise control system will cancel automatically. . If the CRUISE in[...]

accelerator pedal. Y our vehicle will maintain the set speed. . T o pass another vehicle, depress the accelerator pedal. When you release the pedal, the vehicle will return to the previously set speed. . The vehicle may not maintain the set speed on winding or hilly roads. If this happens, drive without the cruise control. T o cancel the preset spe[...]

5-26 Starting and driving Follow these easy-to-use Fuel Efficient Driving Tips to help you achieve the most fuel economy from your vehicle. 1. Use smooth accelerator and brake pedal application. . Avoid rapid starts and stops. . Use smooth, gentle accelerator and brake application whenever possible. . Maintain constant speed while commut- ing and c[...]

. Keep your engine tuned up. . Follow the recommended scheduled main- tenance. . Keep the tires inflated to the correct pressure. Low tire pressure increases tire wear and lowers fuel economy. . Keep the wheels in correct alignment. Improper alignment increases tire wear and lowers fuel economy. . Use the recommended viscosity engine oil. (See “E[...]

5-28 Starting and driving 3. T o help prevent the vehicle from rolling into traffic when parked on an incline, it is a good practice to turn the wheels as illustrated. . HEADED DOWNHILL WITH CURB: * 1 T urn the wheels into the curb and move the vehicle forward until the curb side wheel gently touches the curb. . HEADED UPHILL WITH CURB: * 2 T urn t[...]

BRAKING PRECAUTION S The brake system has two separate hydraulic circuits. If one circuit malfunctions, you will still have braking at two wheels. V acuum assisted brakes The brake booster aids braking by using engine vacuum. If the engine stops, you can stop the vehicle by depressing the brake pedal. However, greater foot pressure on the brake ped[...]

5-30 Starting and driving Tire and Loading Information label. See “Tire and Loading Information label” (P .9-10) . — For detailed information, see “Wheels and tires” (P .8-30) . The Anti-lock Braking System (ABS) controls the brakes so the wheels do not lock during hard braking or when braking on slippery surfaces. The system detects the [...]

The Vehicle Dynamic Control (VDC) system uses various sensors to monitor driver inputs and vehicle motion. Under certain driving con- ditions, the VDC system helps to perform the following functions. . Controls brake pressure to reduce wheel slip on one slipping drive wheel so power is transferred to a non slipping drive wheel on the same axle. . C[...]

5-32 Starting and driving warning light may illuminate. . If brake related parts such as brake pads, rotors and calipers are not NISSAN recommended or are extre- mely deteriorated, the VDC system may not operate properly and the VDC warning light may illumi- nate. . If engine control related parts are not NISSAN recommended or are extremely deterio[...]

TIRE EQUIPMENT SUMMER tires have a tread designed to provide superior performance on dry pavement. How- ever, the performance of these tires will be substantially reduced in snowy and icy condi- tions. If you operate your vehicle on snowy or icy roads, NISSAN recommends the use of MUD & SNOW or ALL SEASON tires on all four wheels. Consult a NIS[...]

5-34 Starting and driving 4. Plug the extension cord into a Ground Fault Interrupt (GFI) protected, grounded 110- volt AC (V AC) outlet. 5. The engine block heater must be plugged in for at least 2 - 4 hours, depending on outside temperatures, to properly warm the engine coolant. Use an appropriate timer to turn the engine block heater on. 6. Befor[...]

6 In case of emergency Hazard warning flasher switch .............................................. 6-2 Emergency engine shut off ..................................................... 6-2 Flat tire ......................................................................................... 6-3 Tire Pressure Monitoring System (TPMS) ...................[...]

6-2 In case of emergency SIC2574 Push the switch on to warn other drivers when you must stop or park under emergency condi- tions. All turn signal lights will flash. WARNING . If stopping for an emergency, be sure to move the vehicle well off the road. . Do not use the hazard warning flashers while moving on the high- way unless unusual circumstanc[...]

TIRE PRESSURE MONITORING S Y S- TEM (TPMS) This vehicle is equipped with the Tire Pressure Monitoring System (TPMS) . It monitors tire pressure of all tires except the spare. When the low tire pressure warning light is lit and the CHECK TIRE PRESSURE warning appears on the vehicle information display , one or more of your tires is significantly und[...]

6-4 In case of emergency . Never change tires when the vehicle is on a slope, ice or slippery areas. This is hazardous. . Never change tires if oncoming traffic is close to your vehicle. Wait for professional road assistance. MCE0001A Blocking wheels Place suitable blocks * 1 at both the front and back of the wheel diagonally opposite the flat tire[...]

4. Remove tools * A and jack * B located as illustrated. JVE0031X JVE0032X Getting the spare tire The spare tire is located under the center of the vehicle. 1. Lift up the floor carpeting flap behind the front center console to access the spare tire lowering mechanism * C . 2. Loosen the spare tire lowering mechanism * C with the wheel nut wrench. [...]

6-6 In case of emergency 5. Remove the hanging plate * E from the spare tire. 6. After removing the spare tire, raise the spare tire cable completely by turning the spare tire lowering mechanism clockwise using the tool * D . 7. Before moving or jacking up the vehicle, check under the vehicle to make sure the cable is stored properly. WARNING . Nev[...]

Carefully read the caution label attached to the jack body and the following instruc- tions. SCE0585 Jack-up point 1. Place the jack directly under the jack -up point as illustrated so the top of the jack contacts the vehicle at the jack -up point. Align the jack head between the two notches in the front or the rear as shown. Also fit the groove of[...]

6-8 In case of emergency SCE0504 2. Loosen each wheel nut one or two turns by turning counterclockwise with the wheel nut wrench. Do not remove the wheel nuts until the tire is off the ground. 3. T o lift the vehicle, securely hold the jack lever and rod with both hands as shown above. Carefully raise the vehicle until the tire clears the ground. R[...]

4. Lower the vehicle slowly until the tire touches the ground. Then, with the wheel nut wrench, tighten the wheel nuts securely in the sequence as illustrated. Lower the vehicle completely. 5. Securely store the flat tire, jack and tools in the vehicle. WARNING . Incorrect wheel nuts or improperly tightened wheel nuts can cause the wheel to become [...]

6-10 In case of emergency SCE0978 WARNING . When storing the spare tire, make sure that the outer side of the spare tire * A is facing up and that the hanging plate * B is in the center of the wheel as illustrated. Failure to store the spare tire properly could result in serious vehicle damage and may lead to an accident and could result in serious[...]

. Whenever working on or near a battery, always wear suitable eye protectors (for example, goggles or industrial safety spectacles) and remove rings, metal bands, or any other jewelry. Do not lean over the battery when jump starting. . Do not attempt to jump start a frozen battery. It could explode and cause serious injury. . Y our vehicle has an a[...]

6-12 In case of emergency 5. Start the engine of the booster vehicle * B and let it run for a few minutes. 6. Keep the engine speed of the booster vehicle * B at about 2,000 rpm, and start the engine of the vehicle * A being jump started. CAUTION Do not keep the starter motor engaged for more than 10 seconds. If the engine does not start right away[...]

3. Get out of the vehicle. Look and listen for steam or coolant escaping from the radiator before opening the hood. (If steam or coolant is escaping, turn off the engine.) Do not open the hood further until no steam or coolant can be seen. 4. Open the engine hood. WARNING If steam or water is coming from the engine, stand clear to prevent getting b[...]

6-14 In case of emergency When towing your vehicle, all State (Provincial in Canada) and local regulations for towing must be followed. Incorrect towing equipment could damage your vehicle. T owing instructions are available from a NISSAN dealer. Local service operators are familiar with the applicable laws and procedures for towing. T o assure pro[...]

SCE0976 T OWING RECOMMENDED BY NISSAN NISSAN recommends that your vehicle be towed with the driving (front) wheels off the ground or place the vehicle on a flat bed truck as illustrated. CAUTION . Never tow Continuously V ariable T ransmission (CVT) models with the front wheels on the ground or four wheels on the ground (forward or backward) , as t[...]

6-16 In case of emergency SCE0970 Front SCE0971 Rear (tie down and recovery hook) VEHICLE RECOVERY (freeing a stuck vehicle) WARNING . Stand clear of a stuck vehicle. . Do not spin your tires at high speed. This could cause them to explode and result in serious injury. Parts of your vehicle could also overheat and be damaged. Pulling a stuck vehicl[...]

. Pulling devices should be routed so they do not touch any part of the suspension, steering, brake or cool- ing systems. . Pulling devices such as ropes or canvas straps are not recommended for use in vehicle towing or recov- ery. Rocking a stuck vehicle If your vehicle is stuck in sand, snow , mud, etc., use the following procedure: 1. T urn off [...]

6-18 In case of emergency MEMO I n f o r m a t i o n P r o v i d e d b y :[...]

7 Appearance and care Cleaning exterior ....................................................................... 7-2 Washing ................................................................................. 7-2 Waxing ................................................................................... 7-2 Removing spots ..............................[...]

7-2 Appearance and care In order to maintain the appearance of your vehicle, it is important to take proper care of it. T o protect the paint surface, wash your vehicle as soon as you can: . after a rainfall to prevent possible damage from acid rain . after driving on coastal roads . when contaminants such as soot, bird droppings, tree sap, metal p[...]

REMOVING SPO TS Remove tar and oil spots, industrial dust, insects, and tree sap as quickly as possible from the paint surface to avoid lasting damage or staining. Special cleaning products are available at a NISSAN dealer or any automotive accessory stores. UNDERBODY In areas where road salt is used in winter, the underbody must be cleaned regular[...]

7-4 Appearance and care TIRE DRESSING NISSAN does not recommend the use of tire dressings. Tire manufacturers apply a coating to the tires to help reduce discoloration of the rubber. If a tire dressing is applied to the tires, it may react with the coating and form a com- pound. This compound may come off the tire while driving and stain the vehicl[...]

may damage the lens cover. AIR FRESHENERS Most air fresheners use a solvent that could affect the vehicle interior. If you use an air freshener, take the following precautions: . Hanging-type air fresheners can cause permanent discoloration when they contact vehicle interior surfaces. Place the air freshener in a location that allows it to hang fre[...]

7-6 Appearance and care SAI0058 Bracket positions The illustration shows the location of the floor mat brackets. SEA T BEL TS The seat belts can be cleaned by wiping them with a sponge dampened in a mild soap solution. Allow the belts to dry completely before using them. See “Seat belts” (P .1-15) . WARNING Do not allow wet seat belts to roll u[...]

T emperatu re A temperature increase will accelerate the rate of corrosion to those parts which are not well ventilated. Air pollution Industrial pollution, the presence of salt in the air in coastal areas, or heavy road salt use will accelerate the corrosion process. Road salt will also accelerate the disintegration of paint surfaces. T O PRO TECT[...]

7-8 Appearance and care MEMO I n f o r m a t i o n P r o v i d e d b y :[...]

8 Maintenance and do-it-yourself Maintenance requirement ........................................................ 8-2 Scheduled maintenance .................................................... 8-2 General maintenance ......................................................... 8-2 Where to go for service ...............................................[...]

8-2 Maintenance and do-it-yourself Some day-to-day and regular maintenance is essential to maintain your vehicle’s good me- chanical condition, as well as its emission and engine performance. It is the owner’s responsibility to make sure that the scheduled maintenance, as well as general maintenance, is performed. As the vehicle owner, you are [...]

Lights*: Clean the headlights on a regular basis. Make sure that the headlights, stop lights, tail lights, turn signal lights, and other lights are all operating properly and installed securely . Also check headlight aim. Road wheel nuts (lug nuts)*: When checking the tires, make sure no wheel nuts are missing, and check for any loose wheel nuts. T[...]

8-4 Maintenance and do-it-yourself Windshield defroster: Check that the air comes out of the defroster outlets properly and in sufficient quantity when operating the heater or air conditioner. Windshield wiper and washer*: Check that the wipers and washer operate properly and that the wipers do not streak. Under the hood and vehicle The maintenance[...]

When performing any inspection or mainte- nance work on your vehicle, always take care to prevent serious accidental injury to yourself or damage to the vehicle. The following are general precautions which should be closely observed. WARNING . Park the vehicle on a level surface, apply the parking brake securely and block the wheels to prevent the [...]

8-6 Maintenance and do-it-yourself affect warranty coverage. If in doubt about any servicing, we recommend that it be done by a NISSAN dealer. SDI2715 VQ35DE ENGINE 1. Power steering fluid reservoir 2. Drive belt location 3. Engine oil filler cap 4. Brake fluid reservoir 5. Air cleaner 6. Fuse/fusible link holder 7. Window washer fluid reservoir 8.[...]

The engine cooling system is filled at the factory with a pre-diluted mixture of 50% Genuine NISSAN Long Life Antifreeze/Coolant (blue) and 50% water to provide year-round anti-freeze and coolant protection. The anti-freeze solution contains rust and corrosion inhibitors. Additional engine cooling system additives are not neces- sary. WARNING . Nev[...]

8-8 Maintenance and do-it-yourself SDI2691 CHECKING ENGINE COOLANT LEVEL Check the coolant level in the reservoir when the engine is cold. If the coolant level is below the MIN level * 2 , open the reservoir cap and add coolant up to the MAX level * 1 . If the reservoir is empty , check the coolant level in the radiator when the engine is cold. If [...]

opening. Do not overfill * 3 . 6. Recheck oil level with the dipstick. It is normal to add some oil between oil maintenance intervals or during the break- in period, depending on the severity of operating conditions. CAUTION Oil level should be checked regularly. Operating the engine with an insuffi- cient amount of oil can damage the engine, and s[...]

8-10 Maintenance and do-it-yourself SDI2717 Engine oil and filter 1. Place a large drain pan under the drain plug * A . 2. Remove the oil filler cap * B . 3. Remove the drain plug with a wrench and completely drain the oil. CAUTION Be careful not to burn yourself, as the engine oil is hot. . Waste oil must be disposed of properly. . Check your loca[...]

13. T urn the engine off and wait more than 10 minutes. Check the oil level with the dipstick. Add engine oil if necessary. After the operation 1. Lower the vehicle carefully to the ground. 2. Dispose of waste oil and filter properly. WARNING . Prolonged and repeated contact with used engine oil may cause skin cancer. . T ry to avoid direct skin co[...]

8-12 Maintenance and do-it-yourself CAUTION . Do not overfill. . Use of a power steering fluid other than Genuine NISSAN E-PSF will prevent the power steering system from operating properly. For additional brake fluid information, see “Capacities and recommended fluids/lubricants” (P .9-2) of this manual. WARNING . Use only new fluid from a sea[...]

SDI2724 Fill the window washer fluid reservoir periodi- cally . Add window washer fluid when the low washer fluid warning appears on the vehicle information display. T o fill the window washer fluid reservoir, lift the cap and pour the window washer fluid into the reservoir opening. Add a washer solvent to the water for better cleaning. In the wint[...]

8-14 Maintenance and do-it-yourself contact your skin, eyes, fabrics, or painted surfaces. After touching a battery or battery cap, do not touch or rub your eyes. Thoroughly wash your hands. If the acid contacts your eyes, skin or clothing, immediately flush with water for at least 15 minutes and seek medical attention. . Do not operate the vehicle[...]

JUMP ST ARTING If jump starting is necessary, see “Jump starting” (P .6-10) . If the engine does not start by jump starting, the battery may have to be replaced. Contact a NISSAN dealer. CAUTION . Do not ground accessories directly to the battery terminal. Doing so will bypass the variable voltage control system and the vehicle battery may not [...]

8-16 Maintenance and do-it-yourself 2. Have the belt condition checked regularly. WARNING Be sure the engine and ignition switch are off and that the parking brake is engaged securely. CAUTION Be sure to use the correct socket to remove the spark plugs. An incorrect socket can damage the spark plugs. SDI2020 REPLACING SPARK PLUGS If replacement is [...]

SDI2180 Pull the tabs * 1 and pull out the cover * 2 . The air cleaner filter should not be cleaned and reused. Replace it according to the maintenance log shown in the “NISSAN Service and Main- tenance Guide” . When replacing the filter, wipe the inside of the air cleaner housing and the cover with a damp cloth. WARNING . Operating the engine [...]

8-18 Maintenance and do-it-yourself REPLACING CAUTION . After wiper blade replacement, re- turn the wiper arm to its original position; otherwise it may be da- maged when the hood is opened. . Make sure the wiper blades contact the glass; otherwise the arm may be damaged from wind pressure. SDI2694 T ype A (if so equipped) Replace the wiper blades [...]

SDI1649 T ype B (if so equipped) Replace the wiper blades if they are worn. 1. Lift the wiper arm away from the windshield. When lifting the wiper arm, lift the driver’s side first, then the passenger’s side. Otherwise, the wiper blades may be scratched and may cause damage. 2. Push and hold the release tab * A , and then move the wiper blade d[...]

8-20 Maintenance and do-it-yourself Contact a NISSAN dealer if checking or replacement is required. If the brakes do not operate properly , have the brakes checked by a NISSAN dealer. SELF-ADJUSTING BRAKES Y our vehicle is equipped with self-adjusting brakes. The disc-type brakes self-adjust every time the brake pedal is applied. WARNING See a NISS[...]

SDI2181 ENGINE COMPARTMENT CAUTION Never use a fuse of a higher or lower amperage rating than that specified on the fuse box cover. This could damage the electrical system or cause a fire. If any electrical equipment does not operate, check for an open fuse. 1. Be sure the ignition switch and the headlight switch are turned off. 2. Open the engine [...]

8-22 Maintenance and do-it-yourself JVM0187X P ASSENGER COMPARTMENT CAUTION Never use a fuse of a higher or lower amperage rating than that specified on the fuse box cover. This could damage the electrical system or cause a fire. If any electrical equipment does not operate, check for an open fuse. 1. Be sure the ignition switch and the headlight s[...]

NOTE: If the extended storage fuse switch mal- functions, or if the fuse is open, it is not necessary to replace the switch. In this case, remove the extended storage fuse switch and replace it with a new fuse of the same rating. How to remove the extended storage fuse switch: 1. T o remove the extended storage fuse switch, be sure the ignition swi[...]

8-24 Maintenance and do-it-yourself 3. Replace the battery with a new one. Recommended battery: CR2025 or equivalent . Do not touch the internal circuit and electric terminals as doing so could cause a malfunction. . Hold the battery by the edges. Holding the battery across the contact points will seriously deplete the storage capacity. . Make sure[...]

SDI2716 1. Headlight (high beam) 2. Front side marker light 3. Map light 4. Side turn signal light (if so equipped) 5. Rear personal light 6. Front turn signal/parking light 7. Front fog light (if so equipped) 8. Headlight (low beam) 9. Step light 10. Cargo light 11. Rear side marker light 12. Stop/tail light 13. High-mounted stop light 14. Rear tu[...]

8-26 Maintenance and do-it-yourself HEADLIGHTS Fog may temporarily form inside the lens of the exterior lights in the rain or in a car wash. A temperature difference between the inside and the outside of the lens causes the fog. This is not a malfunction. If large drops of water collect inside the lens, contact a NISSAN dealer. Replacing If replace[...]

EXTERIOR AND INTERIOR LIGHTS Item Wattage (W) Bulb No. Headlight Low beams (X enon)* 35 D2S High beam (Halogen) 60 HB3 Low beam (Halogen) 55 H11 Front turn signal/parking light* 27/8 S25 Side turn signal light (if so equipped)* LED — Front fog light (if so equipped) 35 H8 Front side marker light 5 T10 Rear combination light* T urn signal 21 WY21W[...]

8-28 Maintenance and do-it-yourself SDI1679 SDI2200 Front side marker light 1. Remove the rubber cover. 2. Remove the bulb as illustrated. SDI2184 Front fog light (if so equipped) I n f o r m a t i o n P r o v i d e d b y :[...]

SDI2030 Front map light SDI2031 Rear personal light SDI1500B Cargo light SDI2032 V anity mirror light Maintenance and do-it-yourself 8-29 I n f o r m a t i o n P r o v i d e d b y :[...]

8-30 Maintenance and do-it-yourself If you have a flat tire, see “Flat tire” (P .6-3) . TIRE PRESSURE Tire Pressure Monitoring System (TPMS) This vehicle is equipped with the Tire Pressure Monitoring System (TPMS) . It monitors tire pressure of all tires except the spare. When the low tire pressure warning light is lit and the CHECK TIRE PRESSU[...]

“Tire Safety Information” (Cana- da) in the Warranty Information Booklet. SDI2197 Tire and Loading Information label * 1 Seating capacity: The maximum num- ber of occupants that can be seated in the vehicle. * 2 V ehicle load limit: See “Vehicle load- ing information” (P .9-12) . * 3 Original size: The size of the tires originally installed[...]

8-32 Maintenance and do-it-yourself hours, or driven less than 1 mile (1.6 km) at moderate speeds. The recom- mended cold tire inflation is set by the manufacturer to provide the best balance of tire wear, vehicle handling, driveability, tire noise, etc., up to the vehicle’s GVWR. * 5 Tire size — see “Tire labeling” (P .8- 33) . * 6 Spare t[...]

SIZE COLD TIRE IN- FLA TION PRES- SURE FRONT ORIGI- NAL TIRE P225/65R16 99T 240 kPa, 35 PSI P235/55R18 99T 240 kPa, 35 PSI REAR ORIGI- NAL TIRE P225/65R16 99T 240 kPa, 35 PSI P235/55R18 99T 240 kPa, 35 PSI SPARE TIRE T135/80D16 101M 420 kPa, 60 PSI T135/90D16 102M 420 kPa, 60 PSI SDI1575 Example TIRE LABELING Federal law requires tire manufacturers[...]

8-34 Maintenance and do-it-yourself 5. T wo-digit number (16): This number is the wheel or rim diameter in inches. 6. T wo- or three-digit number (94): This number is the tire’s load index. It is a measurement of how much weight each tire can support. Y ou may not find this information on all tires because it is not required by law. 7. H: Tire sp[...]

load rating as the factory installed tire. * 6 T erm of “tubeless” or “tube type” Indicates whether the tire requires an inner tube (“tube type”) or not (“tubeless”) . * 7 The word “radial” The word “radial” is shown, if the tire has radial structure. * 8 Manufacturer or brand name Manufacturer or brand name is shown. Other [...]

8-36 Maintenance and do-it-yourself match the potential maximum vehicle speed. Never exceed the maximum speed rating of the tire. If you install snow tires, they must be the same size, brand, construction and tread pattern on all four wheels. For additional traction on icy roads, studded tires may be used. However, some U.S. states and Canadian pro[...]

a tight fit. Loose end links of the tire chain must be secured or removed to prevent the possibility of whipping action damage to the fenders or underbody. If possible, avoid fully loading your vehicle when using tire chains. In addition, drive at a reduced speed. Otherwise, your vehicle may be damaged and/or vehicle handling and performance may be[...]

8-38 Maintenance and do-it-yourself SDI1663 Tire wear and damage 1. W ear indicator 2. W ear indicator location mark WARNING . Tires should be periodically in- spected for wear, cracking, bul- ging or objects caught in the tread. If excessive wear, cracks, bulging or deep cuts are found, the tire(s) should be replaced. . The original tires have bui[...]

accident and personal injury. . If the wheels are changed for any reason, always replace with wheels which have the same off-set dimen- sion. Wheels of a different off-set could cause premature tire wear, degrade vehicle handling character- istic s and/or interference with the brake disc s/drums. Such interfer- ence can lead to decreased braking ef[...]

8-40 Maintenance and do-it-yourself 4.2 bar) . Always keep the pressure of the full size spare tire (if so equipped) at the recommended pressure for standard tires, as in- dicated on the Tire and Loading Information label. . With the TEMPORAR Y USE ONL Y spare tire installed do not drive your vehicle at speeds faster than 50 MPH (80 km/h) . . When [...]

MEMO Maintenance and do-it-yourself 8-41 I n f o r m a t i o n P r o v i d e d b y :[...]

8-42 Maintenance and do-it-yourself MEMO I n f o r m a t i o n P r o v i d e d b y :[...]

9 T echnical and consumer information Capacities and recommended fluids/lubricants ................ 9-2 Fuel information ................................................................... 9-3 Engine oil and oil filter recommendation ....................... 9-5 Air conditioning system refrigerant and lubricant recommendations ......................[...]

9-2 T echnical and consumer information The following are approximate capacities. The actual refill capacities may be a little different. When refilling, follow the procedure instructed in the “8. Maintenance and do-it-yourself” section to determine the proper refill capacity. Capacity (Approximate) Recommended Fluids and Lubricants US measure [...]

FUEL INFORMA TION Use unleaded regular gasoline with an octane rating of at least 87 AKI (Anti-Knock Index) number (Research octane number 91) . CAUTION . Using a fuel other than that speci- fied could adversely affect the emis- sion control system, and may also affect warranty coverage. . Under no circumstances should a leaded gasoline be used, be[...]

9-4 T echnical and consumer information blends may cause fuel system damage and/or vehicle performance problems. At this time, sufficient data is not available to ensure that all methanol blends are suitable for use in NISSAN vehicles. If any driveability problems such as engine stalling and difficult hot-starting are experienced after using oxygen[...]

JVT0342X 1. API certification mark 2. API service symbol ENGINE OIL AND OIL FIL TER RE- COMMENDA TION Selecting the correct oil It is essential to choose the correct grade, quality, and viscosity engine oil to ensure satisfactory engine life and performance, see “Capacities and recommended fluids/lubricants” (P .9-2) . NISSAN recommends the use[...]

9-6 T echnical and consumer information interval. Oil and filter change intervals depend upon how you use your vehicle. Operation under the following conditions may require more frequent oil and filter changes. . repeated short distance driving at cold outside temperatures . driving in dusty conditions . extensive idling . towing a trailer . stop a[...]

ENGINE Model VQ35DE T ype Gasoline, 4-cycle Cylinder arrangement 6-cylinder, V-slanted at 60 8 Bore 6 Stroke in (mm) 3.760 6 3.205 (95.5 6 81.4) Displacement cu in (cm 3 ) 213.45 (3,498) Firing order 1-2-3-4-5-6 Idle speed rpm No adjustment is necessary. Ignition timing (B.T .D.C.) degree/rpm Spark plug Standard FXE22HR-11 Spark plug gap (Normal) i[...]

9-8 T echnical and consumer information DIMENSIONS AND WEIGHT S Overall length in (mm) 200.8 (5,100)*1 201.2 (5,110)*2 Overall width in (mm) 77.6 (1,970) Overall height with- out roof rack rail in (mm) 71.5 (1,815) Overall height with roof rack rail in (mm) 73.0 (1,855) Front tread in (mm) 68.1 (1,730)*3 67.7 (1,720)*4 Rear tread in (mm) 68.1 (1,73[...]

STI0802 VEHICLE IDENTIFICA TION NUMBER (chassis number) The vehicle identification number is located as shown. Remove the cover to access the number. STI0562 ENGINE SERIAL NUMBER The number is stamped on the engine as shown. STI0448 F .M.V.S.S./C.M.V .S.S. CERTIFICA TION LABEL The Federal/Canadian Motor Vehicle Safety Standards (F .M.V .S.S./C.M.V.[...]

9-10 T echnical and consumer information STI0815 EMISSION CONTROL INFORMA TION LABEL The emission control information label is at- tached as shown. STI0494 TIRE AND LOADING INFORMA TION LABEL The cold tire pressure is shown on the Tire and Loading Information label affixed to the pillar as illustrated. STI0803 AIR CONDITIONER SPECIFICA TION LABEL T[...]

STI0820 Use the following steps to mount the license plate. Before mounting the license plate, confirm that the following parts are enclosed in the plastic bag. . License plate bracket . Screw 6 2 (for license plate bracket) 1. Park the vehicle on flat, level ground. 2. Line up the tab * A on the license plate bracket under the top of the front bum[...]

9-12 T echnical and consumer information WARNING . It is extremely dangerous to ride in a cargo area inside the vehi- cle. In a collision, people riding in these areas are more likely to be seriously injured or killed. . Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. . Be sure everyone in you[...]

STI0445 Steps for determining correct load limit 1. Locate the statement “The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs” on your vehicle’s placard. 2. Determine the combined weight of the driver and passengers that will be riding in your vehicle. 3. Subtract the combined weight of the driver and passengers f[...]

9-14 T echnical and consumer information 6. If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the avail- able cargo and luggage load capacity of your vehicle. Before driving a loaded vehicle, confirm that you do not exceed the Gross Vehicle W eight[...]

WARNING . Properly secure all cargo with ropes or straps to help prevent it from sliding or shifting. Do not place cargo higher than the seatbacks. In a sudden stop or collision, unsecured cargo could cause personal injury. . Do not load your vehicle any heavier than the GVWR or the maximum front and rear GAWRs. If you do, parts of your vehicle can[...]

9-16 T echnical and consumer information guide includes information on trailer towing capability and the special equipment required for proper towing. MAXIMUM LOAD LIMITS Maximum trailer loads Never allow the total trailer load to exceed the value specified in the “T owing Load/Specifica- tion” chart. The total trailer load equals trailer weigh[...]

by NISSAN warranties. STI0542 T ongue load When using a weight carrying or a weight distributing hitch, keep the tongue load between 10 to 15% of the total trailer load within the maximum tongue load limits shown in the following “T owing Load/Specification” chart. If the tongue load becomes excessive, rearrange cargo to allow for proper tongue[...]

9-18 T echnical and consumer information required to achieve the rating. Additional pas- sengers, cargo and/or optional equipment, such as the trailer hitch, will add weight to the vehicle and reduce your vehicle’s maximum towing capacity and trailer tongue load. The vehicle and trailer need to be weighed to confirm the vehicle is within the GVWR[...]

Always verify that available capacities are within the required ratings. T OWING L OAD/SPECIF ICA TION T OWING L OAD/SPECIFICATION CHART Unit: lb (kg) MODEL VQ35DE WEIGHT CVT MAXIMUM TRAILER WEIGHT*1 3,500 (1,588) MAXIMUM TONGUE LOAD 350 (159) GROSS COMBINED WEIGHT RA TING 8,500 (3,856) RECOMMENDED EQUIPMENT*2 Sway Control Device (SCD) 1: All towin[...]

9-20 T echnical and consumer information T OWING SAFETY T railer hitch Choose a proper hitch for your vehicle and trailer. A genuine NISSAN trailer hitch is available from a NISSAN dealer. Make sure the trailer hitch is securely attached to the vehicle to help avoid personal injury or property damage due to sway caused by crosswinds, rough road sur[...]

is removed, seal the bolt holes to prevent exhaust fumes, water or dust from entering the passenger compartment. . Regularly check that all trailer hitch mounting bolts are securely mounted. Tire pressures . When towing a trailer, inflate the vehicle tires to the recommended cold tire pressure indicated on the Tire and Loading Information label. . [...]

9-22 T echnical and consumer information . Check your hitch, trailer tire pressure, vehicle tire pressure, trailer light operation, and trailer wheel lug nuts every time you attach a trailer to the vehicle. . Be certain your rearview mirrors conform to all federal, state or local regulations. If not, install any mirrors required for towing before d[...]

. Have your vehicle serviced more often than at intervals specified in the recommended maintenance schedule in the NISSAN Ser- vice and Maintenance Guide. . When making a turn, your trailer wheels will be closer to the inside of the turn than your vehicle wheels. To compensate for this, make a larger than normal turning radius during the turn. . Cr[...]

9-24 T echnical and consumer information FLA T T OWING T owing your vehicle with all four wheels on the ground is sometimes called flat towing. This method is sometimes used when towing a vehicle behind a recreational vehicle, such as a motor home. CAUTION . Failure to follow these guidelines can result in severe transmission damage. . Whenever fla[...]

traction performance. WARNING The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction characteristic s. TEMPERA TURE A, B AND C The temperature grades A (the highest) , B, and C, representing the tire’s resistance to the generation of [...]

9-26 T echnical and consumer information For USA If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway T raffic Safety Administration (NHTSA) in addition to notifying NISSAN. If NHTSA receives similar complaints, it may open an investigation, and if[...]

Due to legal requirements in some states/areas or provinces, your vehicle may be required to be in what is called the “ready condition” for an Inspection/Maintenance (I/M) test of the emis- sion control system. The vehicle is set to the “ready condition” when it is driven through certain driving patterns. Usually, the “ready condition” [...]

9-28 T echnical and consumer information Genuine NISSAN Service Manuals for this model year and prior can be purchased. A genuine NISSAN Service Manual is the best source of service and repair information for your vehicle. This manual is the same one used by the factory-trained technicians working at NISSAN dealerships. Genuine NISSAN Owner’s Man[...]

10 Index A A/C (Air Conditioner) operation.............................. 4-44 ABS (Anti-lock Braking System) ............................ 5-29 Advanced air bag system ......................................... 1-54 Aiming control, Headlights ........................................ 2-36 Air bag system Advanced air bag system ........................[...]

10-2 Console box ................................................................. 2-47 Continuously Variable T ransmission (CVT) fluid..................................................................... 8-11 Controls, Control panel button.................................. 4-4 Coolant Capacities and recommended fluids/lubricants ..................[...]

G Garage door opener, HomeLink  Universal T ransceiver ............................................ ...... 2-59 Gas cap......................................................................... 3-30 Gauge ................................................. ............................. 2-5 Engine coolant temperature gauge .................... 2-7 F[...]

10-4 Lights, Exterior and interior light replacement ..... 8-27 Loading information (See vehicle loading information) .................................................... 9-12 Lock Automatic door locks....................................... ...... 3-7 Door locks................................................................. 3-5 Lift gate lock ...[...]

R Radio .............................................................................. 4-56 Car phone or CB radio .................................... 4-116 FM-AM-SA T radio with Compact Disc (CD) player ............................................ ..... 4-72, 4-82 Rapid air pressure loss ................................................ 5-7 Readine[...]

10-6 Theft (NISSAN V ehicle Immobilizer System) , Engine start ............................................ ....................... 2-29 Three-way catalyst............................................ ............ 5-3 Tilt/telescopic steering ............................................... 3-32 Tire Pressure, Low tire pressure warning light..... 2-1[...]

Windshield wiper and washer switch.................... 2-30 Wiper Rear window wiper and washer switch......... 2-31 Rear window wiper blade.................................. 8-20 Windshield wiper and washer switch............. 2-30 Wiper blades......................................................... 8-17 X Xenon headlights.........................[...]

FUEL INFORMA TION: Use unleaded regular gasoline with an octane rating of at least 87 AKI (Anti-Knock Index) number (Research octane number 91) . CAUTION . Using a fuel other than that speci- fied could adversely affect the emis- sion control system, and may also affect warranty coverage. . Under no circumstances should a leaded gasoline be used, b[...]