Onkyo 29344934 manual

E n 7.1ch Home Theater System HT-S5200 A V Receiv er (HT -R570) Speaker P ackage (HTP-570) Front Speak ers (SKF-570 L/R) Center Speaker (SKC-570) Surround Speak ers (SKR-570 L/R) Surround Back Speak ers (SKB-570 L/R) Subw oofer (SKW -570) Dock f or iP od (UP-A1L) Instruction Manual Thank you for purchasing an Onkyo 7.1ch Home Theater System. Please[...]

2 Impor tant Safety Instructions 1. Read these ins tructions. 2. Ke ep these instru ctions. 3. Heed all warnings. 4. Follo w all instructi ons. 5. Do not use this apparatus near w ater . 6. Clean only with dry cloth. 7. Do not block an y ventil ation openings. Install in accordance with the manuf acturer’ s instructions. 8. Do not install near an[...]

3 Precautions 1. Recording Copyright —Unless it’ s for personal use only , recording copy righted material i s illeg al without the permission of the copyright holder . 2. A C Fuse —The A C fuse inside the unit is not user- serviceable. If you cannot turn on the unit, contact your Onkyo dealer . 3. Care —Occasionally you should dust the uni[...]

4 Speaker Precautions Placement • The subwoofer cabinet is made out o f wood and is therefore sensiti ve to extrem e temperatures and humidity , do not put it in lo cations subject to direct sunlight or in humid places, such as near an air condi- tioner , humidifier , bathroom, or kitchen. • Do not put w ater or other liquids close to the speak[...]

5 P acka ge Contents —Continued *I n catalogs a nd on packagi ng, the let ter at the end of the pr oduct name indicate s the color. Specifications and operatio n are the same regardless of colo r . Speaker P acka g e HTP-570 Speaker cable for fr o nt speakers and center speaker Front speaker s 11 ft (3.5 m) Center speaker 10 ft (3.0 m) Speaker ca[...]

6 Using T wo Sets of Speaker s Y ou can use tw o sets of speakers with the A V receiv er: s peak er set A and speak er set B . Speaker set A should be used in your main listeni ng room for up to 7.1-channel playback. * While speaker set B is on, speaker set A is reduce d to 5.1-cha nnel playb ack. Speaker set B can be used in another room and offer[...]

7 Features Amplifier • 75 W atts/Channel @ 8 ohms (FTC) • 130 W atts/Channel @ 6 ohms (IEC) • WRA T -Wide Range Amplif ier T echnology • High-Current Lo w-Impedance Driv e • Optimum Gai n V olume Circuitry • H.C.P .S. (High Current Power Supply) Massi ve High Power T ransformer Pr ocessing • Dolby Digital EX and Pro Logic IIx *1 • D[...]

8 Features —Continued *3 Music Optimizer ™ is a tradema rk of Onkyo Corpora tion. *4 HDMI, the HDMI logo and High Def inition Multimedia Inter- face are tradema rks or registere d trademark s of HDMI Licens - ing, LLC. *5 SIRIUS, XM an d all rel ated marks a nd logos a re tradema rks of Sirius XM R adio Inc. and it s subsidiari es. All other m [...]

9 Contents * T o reset the A V receiv er to its fac tory def aults, turn i t on and, while holdi ng do wn the [VCR/D VR] button, pr ess the [ON/ ST ANDBY] button (see page 84). Introd uction Important Safety Instructions .................................... 2 Precautions ............................................................... 3 Speaker Prec[...]

10 Fr ont & Rear P a nels The actual front panel has v arious logos printe d on it. They are not sho wn here for clarity . The page numbers in parentheses show where you can f i nd the main explanation for each item. a ON/ST ANDBY button (38) Sets the A V receiv er to On or Standby . b ST ANDBY indicator (38) Lights up when the A V receiver is [...]

11 Fr ont & Rear P anels —Continued For detaile d information, se e the pages in parentheses. p RETURN button Selects the prev iously displayed setup menu. q MASTER V OLUME control (44) Sets the volum e of the A V receiv er to Min, 1 through 79, or Max. r PHONES jack (46) This 1/4-inch phone jack is for connecting a standard pair of ster eo h[...]

12 Front & Rear P a nels —Continued a DIGIT AL IN CO AXIAL 1 and 2 These coaxial digital audio inputs are for connecting components with a coaxial digital audio output, such as a CD player or D VD/BD player . They’ re assignable, which means you can assign each one to an input select or to suit your setup. See “Digital Input Setup” on p[...]

13 Fr ont & Rear P anels —Continued n CBL/SA T IN A cable or satellite receiv er can be connected here. There is composite video input jack s fo r connecting the video signal, and there are analog audio input jacks for connecting the audio signal. o VCR/D VR IN/OUT A video component, such as a VCR or D VR, can be connected here for recordi ng[...]

14 Speaker P ac kage For detailed information, se e th e pages in parentheses. ■ Front ■ Rear a ST ANDBY/ON indicator W ith the Auto Standby function, the SKW -570 automatically turns on when an input signal is detected in Standby mode . Wh en there’ s no input signal for a while, th e SKW -570 automatically enters Standby mode. b OUTPUT LEVE[...]

15 Speaker P ackage —Continued ■ Rear a Ke yhole slots These keyhole slots can be used to wa ll-mount the speaker . See page 21 for mounting instructions. b Speaker terminals These push terminals are for connecting the speaker to the HT -R570 with the supplied speaker cables. The supplied speaker cables are color-coded for easy identification. [...]

16 Remote Contr oller For detailed information, se e th e pages in parentheses. a ON/ST ANDBY button (38) Sets the A V receiv er to On or Standby . b REMO TE MODE/INPU T SELECT OR buttons (44, 61, 80–83) Selects the remote contro ller modes and the input sources. c SP A/B button (18, 44) This button is used to tu rn speaker sets A and B on or off[...]

17 Remote Controller —Continued Notes: • If the remote controller doesn’t wo rk reliably , try replacing the batteries. • Don’ t mix new and old batteries or different types of batteries. • If you intend not to use the re mote controller for a long time, remo ve the batte ries to pre vent dama ge from leakage or corrosion. • Expired b[...]

18 Connecting the A V receiver Thanks to the A V receiv er’ s superb capabilities, you can enjoy surround sound wi th a real sense of movement in your ow n home—just like being in a movie th eater or concert hall. Y o u can enjoy D VDs featuring Dolby Digital or DTS. W ith analog or digital TV , you can enjoy Dolby Pro Log ic IIx, DTS Neo:6, or[...]

19 Connecting the A V receiver —Continued Speaker Config uration For 7.1-channel surround-s ound playback, you need se ven speakers and a po wered subwoofer . The following table shows which channels you should use based on the number of speakers you ha ve. * If you’re using only one su rround bac k speaker, connect it to the SURR BA CK L termi[...]

20 Connecting the A V receiver —Continued Note: While speaker set B is on, speaker set A is reduced to 5.1-channel playback. Connecting Speaker Set A 1 Strip 1/2"-5/8" (12-15 mm) of insulation from t he ends of the speaker cables. (Supplied speaker cables are already stripped.) 2 Unscrew the terminal. Fully inse rt the bare wire, making[...]

21 Connecting the A V receiver —Continued The speakers can easily be w all mounted by using the keyhole slots. T o mount the front or surround speakers vertically , use the keyhole slot sho wn to hang each speaker on a screw that’ s securely scre wed into the wall. Front speakers (SKF-570) Surround speak ers/Surround back speakers (SKR-570/SKB-[...]

22 Connecting the A V receiver —Continued This section explains ho w to connect the supplied indoor FM antenna and AM loop an tenna, and ho w to connect commercially av ailable ou tdoor FM and AM antennas. The A V receiv er won’t pick up any radio signals without any antenna connected, so you must co nnect the antenna to use the tuner . Connect[...]

23 Connecting the A V receiver —Continued Connecting an Outdoor FM Antenna If you cannot achie ve good re ception with the supplied indoor FM antenna, try a commercially a vailable outdoor FM antenna instead. Notes: • Outdoor FM antennas w ork best outside, bu t usable results can someti mes be obtained when i nstalled in an attic or l oft. •[...]

24 Connecting the A V receiver —Continued • Before making any A V connectio ns, read the manuals supplied with your other A V components. • Don’t connect the po wer cord until you’ ve completed and double-checked a ll A V connections. Optical Digit al Jac ks The A V receiv er’ s optical digi tal jacks hav e shutter-ty pe cove rs that op[...]

25 Connecting the A V receiver —Continued By connecting both the audio and video outputs of your D VD pl ayer and other A V compon ents to the A V receiv er, you can switch the audio and vide o signals simultaneously simply b y changing the input source on the A V receiver. The A V receiv er supports sev eral connection formats for compat ibility[...]

26 Connecting the A V receiver —Continued About HDMI Designed to meet the increased demands of digital TV , HDMI (High Definition Mu ltimedia Interface) is a new digital interface standard for connect ing TVs, projectors, D VD/BD players, set-top boxes, and other video components. Until now , sev eral separate video and audio ca bles have been re[...]

27 Connecting the A V receiver —Continued If you ha ve an HDMI-compatible player , you can connect it to the A V recei ver with an HDMI cable. ■ Audio Signals • Audio and video signals receiv ed vi a inputs other than the HDMI IN ja cks are not output by the HDMI OUT. • Audio and video signals receiv ed via the HDM I IN jack s are output on[...]

28 Connecting the A V receiver —Continued • W ith connection , you can listen to and record audio from your TV . • T o enjoy Dolb y Digital and DTS, use connection or . If your TV has no audio outputs, conne ct an audio output from your VCR or cable or satellite recei ver to the A V receiver and use its tuner to listen to TV programs through [...]

29 Connecting the A V receiver —Continued • W ith connection , you can listen to and record audio from a D VD. • T o enjoy Dolb y Digital and DTS, use connection or . (T o record as well, use and , or and .) • If your D VD/BD player has main left and right outputs and multichannel left and right outputs, be sure to use the main left and rig[...]

30 Connecting the A V receiver —Continued W ith this hookup, you can use the tuner in your VCR or D VR to listen to your fa vorite TV p rograms via the A V recei ver, which is usef ul if your TV ha s no audio outputs. • T o enjoy Dolb y Digital and DTS, use connection or . Connecting a VCR or D VR for Pla yback Connection A V receiver Signal fl[...]

31 Connecting the A V receiver —Continued Notes: • The A V recei ver must be turned on for recording. Recording is not possible while it’ s on Standby . • If you want to record directly from your TV or another vi deo source without going thr ough the A V receiver, connect the audio and video outputs from your TV or other video co mponent di[...]

32 Connecting the A V receiver —Continued W ith this hookup, you can use your sa tellite or cable recei v er to listen to your fav orite TV programs via the A V recei ver, which is usef ul if your TV ha s no audio outputs. • W ith connection , you can listen to a nd record audio from the video source. • T o enjoy Dolby Digital and DTS, use co[...]

33 Connecting the A V receiver —Continued Note: When it is connected at the same tim e as A UX INPUT A UDIO L/R terminal, the input of POR T ABLE is giv en priority to and outputted. Connecting a Camcor der , Game Console, or Other Device Connection A V receiver Signal flow Camcorder or console A UX INPUT VIDEO ⇐ Composite video output AU X I N[...]

34 Connecting the A V receiver —Continued ■ CD Player or T urntable (MM) with Built-in Phono Preamp • W ith connection , you can listen to a nd record audio from the CD player . • T o connect the CD pl ayer digitally , use connection or . ■ T urntable (M M) with no Phono Prea mp Built-in A phono preamp is necessary to connect a turntable [...]

35 Connecting the A V receiver —Continued • W ith connection , you can play and record. • T o connect the recorder digitally for pla yback, use connections and , or and . Connecting a Cassette, CDR, MiniDisc, or D A T Recor der Connection A V receiver Signal flow Cassette, CDR, MD, or D A T recorder TV/T APE IN L/R TV/T APE OUT L/R ⇐ ⇒ An[...]

36 Connecting the A V receiver —Continued ■ If Y our iP od Suppor ts Vide o: Connect your RI Dock’ s audio output jacks to the A V receiv er’ s CBL/SA T IN or VCR/D VR IN L/R jacks, and connect its video output jack to the A V receiv er’s CBL/SA T IN or VCR/D VR IN V jack. ■ If Y our iP od Doesn’t Support Video: Connect your RI Dock?[...]

37 Connecting the A V receiver —Continued Wi t h u (Remote Interacti ve), you can use the following special functions: ■ Auto P ower On/Standby When you start playback on a component connected via u , if the A V re ceiv er is on Standby , it will automatical ly turn on and select that component as the input source. Similarly , when the A V rece[...]

38 T urning On the A V receiver ON/ST ANDBY ON/ST ANDBY RECEIVER ST ANDBY indicator T urning On and Standby On the A V receiver, press the [ON/ST ANDBY] button. On the remote controller , press th e [RECEIVER] button, follo wed by the [ON/ST ANDBY] button. The A V receiv er comes on, the display li ghts up, and the ST ANDB Y indicator goes off. T o[...]

39 Fir st Time Setup This section explains the settings that you need to make before using the A V receiv er for the very f irst time. W ith the supplied calibrated microphone, Audyssey 2EQ au tomatically determ ines the number of speakers con nected, their size for purposes of bass management, optimum crosso v er frequencies to the subwoofer (if p[...]

40 First Time Setup —Continued Using A udyssey 2EQ™ Notes: • Before star ting Audyssey 2EQ Room Correctio n and Speaker Setup, arrange th e room and con nect the speakers as you would for enjo ying movies. Changes to the room after auto setup requires you run the auto setup again, as room EQ characteristics may hav e changed. • When startin[...]

41 First Time Setup —Continued Note: When the room c orrecti on and speak er setup is complete, “6. Equaliz er” (page 72) will be set to “ Audyssey . ” Err or Mess ages While the room correction and speaker setup is in progress, one of the foll owing error messages may appear: ❏ Ambient noise is too high This message appears if the re?[...]

42 First Time Setup —Continued If you connect to a COMPONENT VIDEO IN, you must assign it to an input select or . For example, if you connect your D VD/BD player to COMPONENT VIDEO IN 2, you should assign it to the D V D/BD input selector . Note: This procedure can also be performed on the A V recei ver by using its [SETUP] b u tton, arrow button[...]

43 First Time Setup —Continued Notes: • Make sure you also set your dig ital sources to send out a digital signals. Pl ease refer to the digital sources’ manual. • This procedure can also be performed on the A V recei ver by using its [SET UP] button, arro w buttons, and [ENTER] b utton. If you connect an u -capable Onkyo MiniDisc recorder [...]

44 Basic Operations Basic A V receiver Operation 1 Use the A V receiv er’ s input select or buttons to select an input sour ce. T o select an input sour ce with the remote controller . Press the [RECEIVER] button, and then press its INPUT SELECT OR buttons. 2 T o turn the speakers on or off, use the A V receiver’ s SPEAKERS [A] and [B] buttons,[...]

45 Basic Operations —Continued This section explains functions that can be used with an y input source. Y ou can adjust the brightness of the display . Y ou can tempor arily mute the output of the A V receiv er. T o unmute the A V receiv er, press the r emote controller’ s [MUTING] button ag ain, or adjust the volume. The output is unmuted and [...]

46 Basic Oper ations —Continued 7 For pri vate listeni ng, you can connect a pair of stereo headphones (1/4-inch phone plug) to the A V receiv er’ s PHONES jack. Notes: • Always turn d own the v olume before connecting your headphones. • While the headphones plug is inserted in the PHONES jack, the speakers are turned off. • Speak er sets[...]

47 Basic Operations —Continued The Music Optimizer function enhances the sound quality of compressed music f iles. Use it with music f iles that use “lossy” compression, su ch as MP3. Note: The Music Optimizer function only works with PCM digital audio input signals with a sampling rate belo w 48 kHz and analog audio input signals. The Music [...]

48 Listening to the Radio For AM/FM tuning to work properly , you must specify the AM/FM frequenc y step used in your area. Note that when this setting is cha nged, all radi o presets are deleted. Note: This procedure can also be perform ed on the A V recei ver by using its [SETUP] b utton, arro w buttons, and [ENTER] button. AM/FM Frequency Step S[...]

49 Listening to the Radio —Continued W ith the built-in tuner , you can enjoy AM and FM radio stations and st ore your f av orite stations as presets for easy selection. T uning into AM/FM Radio Stations ■ A uto T uning Mo de When tuned into a station, the TUNED indicator appears. When tun ed into a stereo FM sta tion, the FM STEREO indicator a[...]

50 Listening to the Radio —Continued ■ T uning i nto Sta tions by Frequ ency Y ou can tune into AM and FM stations direc tly by entering the appropriate frequency . Displa ying AM/FM Radio Informat ion 1 Press the [TUNER] bu tton repeatedly to select “AM” or “FM”, follo wed by the [D .TUN] button. (Actual display depends on country .) 2[...]

51 Listening to the Radio —Continued Y ou can store a combination of up to 40 of your fa vorite AM and FM radio stations. Deleting Presets Selecting Presets Presetting AM/FM Stations 1 T une into the AM or F M station you want to store as a preset. 2 Press the [MEMOR Y] button. The preset number flashes. 3 While the preset number is flashing (abo[...]

52 Listening to SIRIUS Satellite Radio T o listen to Satellite Radi o, you’ll need to connect a SIRIUS Satellite Radio tuner (sold separately) to your Sirius-Ready receiv er . SI RIUS Satellite Radio is av ailable to residents of the US (except Alaska and Hawaii) and Canada. Satellite Radio deliv ers a variety of commercial- free music from categ[...]

53 Listening to SIRIUS Satellite Radio —Continued Before you can use SIRIUS Sa tellite Radio, you must first sign up for an account. Y ou’ll need a major credi t card and your SIRIUS Satellite Radio ID, which you can get from the A V recei ver, as e xplained below , or from the SiriusConnect Home tuner package. Setting the Satellite Radio Mode [...]

54 Listening to SIRIUS Satellite Radio —Continued Note: After you’ ve acti vated your subscription with SIRI US Satellite Radio, your SIRIUS Satellite Ra dio ID number will no longer be displayed when you select channel 0. There are three way s to select SIRIUS Satellite Radio channels: • Channel Searc h mode: select any channel. • Category[...]

55 Listening to SIRIUS Satellite Radio —Continued Category Sear ch Mode Direct T uning Y ou can select a SI RIUS Sate llite Radio cha nnel directly by ente ring its number with the remote co ntroller . 1 A V receiver Remote controller Press the [TUNER] button, and then press the [ENTER] b utton repeatedly to select Category Searc h mode. This pro[...]

56 Listening to SIRIUS Satellite Radio —Continued Notes: • If you select an una vailable channel, “INV ALID CHANNEL” appears on the display . • If you select a channel that you are not subscribed to, “CALL SIRIUS” appe ars on the displa y . • Channels that are locked must be unlocked before you can listen to them. See “Parental Lo[...]

57 Listening to SIRIUS Satellite Radio —Continued ■ Deleting Presets Press the [DISPLA Y] button repeatedl y to cycle through the a vailable information. Note: If the category , artist, or s ong title is not a vailable, “- - -” will be displayed instead. ■ SIRIUS Satellite Radio Messages The following messages may appear while using SIRIU[...]

58 Listening to SIRIUS Satellite Radio —Continued Y ou can lock out channels that you do no t want to receiv e. * The default numbe r is “0000. ” If you want to change t he default setting, se e “Changing the PIN Numbe r” on page 59. T o unlock a pre viously locked channel, select the locked channel (see step 1–4), press the Left and Ri[...]

59 Listening to SIRIUS Satellite Radio —Continued Changing the PIN Number 1 Press the [RECEIVER] button, follo wed by the [SETUP ] button. 2 Use the Up and Down [ q ]/[ w ] buttons to select “10. P are ntal Lock”, and then press [ENTER]. Note: If the “SA TRadio” is set to “None” (see page 53), the “P arentalLock” item is not av ai[...]

60 UP-A1L Doc k for iP od W ith the supplied UP-A1L Dock , you can easily play the music, photo, or mo vie stored on your Apple iPod through the A V receiv er and enjoy great sound. Y ou can use the A V receiv er’ s remote controller to operate your iPod. ■ Made for: • 2nd Generation iPod touch • 1st Generation iPod touch • iP od photo ?[...]

61 UP-A1L Dock f or iP od —Continued Operating Notes: • Before selecting a dif fer ent input source, stop iPod playback to prev ent the A V rec eiv er from selecting the iPod input source by mistake. • If an y accessories are conne cted to your iPod, the A V recei ver may not be able to select the input source properly . • While your iPod i[...]

62 UP-A1L Dock f or iPod —Continued f MUTING butt on (45) Mutes or unmutes the A V receiv er. g ALBUM +/– b utton Selects the next or pre vious album. h VO L [ q ]/[ w ] button (44) Adjusts the volume of the A V receiv er. i PLA YLIST [ e ]/[ r ] b uttons Selects the previo us or next playlist on the iPod. j RETURN button Exits the menu or retu[...]

63 Recor ding This section explains ho w to record the input source and how to record aud io and video from separate sources. Notes: • The surround sound and D SP listening modes cannot be recorded. • Copy-protected D VDs cannot be recorded. • Sources connected to a digital input cannot be recorded. Only analog inputs can be recorded. • DTS[...]

64 Using the Listening Modes For a description of each li stening mode, see “ A bout the Listening Modes” on page 68. Selecting on the A V receiver ■ LISTENING MODE b uttons [MO VIE/TV] button This button selects the listening modes intended for use with movies and TV . [MUSIC] button This button selects the listening modes intended for use w[...]

65 Using the Listening Modes —Continued Mono/Multiple x Sour ces ✔ : A vail able Li stening Modes Notes: • A vailable sampling rate for PCM input signal is 32/44.1/48/88.2/96kHz. • The listening modes cannot be se lected with some source form ats. Listening Modes A vailab le for Each Sour ce Format The Speaker layout illu stration s hows wh[...]

66 Using the Listening Modes —Continued Stereo Source ✔ : A vailable Listening Modes Notes: *1 If there a re no surro und back spea kers, or speaker set B is on , Dolby Pro Logi c II is us ed. • A vailable sampling rate for PCM input signal is 32/44.1/48/88.2/96kHz. • The listening m odes cannot be selected wi th some source f ormats. Liste[...]

67 Using the Listening Modes —Continued 5.1 chan nel Sour ces ✔ : A vail able Li stening Modes DTS-ES Discret e/Matrix Sour ces Notes: • A vailable sampling rate for PCM input signal is 32/44.1/48/88.2/96kHz. • The listening modes cannot be se lected with some source form ats. Listening Mode Button Speaker lay out Direct ✔✔✔ ✔ Stere[...]

68 Using the Listening Modes —Continued The A V receiv er’s listening modes can transform your listening room into a movie th eater or concert hall, with high fidelity and stunning surround sound. Direct In this mode, audio from the input source is output directly with minima l pr ocessing, providing hig h- fidelity reproduction . All of the so[...]

69 Using the Listening Modes —Continued Onky o Original DSP Modes Orc hestra Suitable for classical or oper atic music, this mode emphasizes the surround channels in order to widen the stereo image, and simulates the nat ural re verbera tion of a large hall. Unplug ged Suitable for acoustic instrument s, vocals, an d jazz, this mode emphasizes th[...]

70 Adv a nced Setup Note: This procedure can also be perform ed on the A V recei ver by using its [SETUP] b utton, arro w buttons, and [ENTER] button. This section explains ho w to check the speaker settings and ho w to set them manually , which is useful if you change a speaker after performing the Audysse y 2E Q™ Room Correction and Speak er Se[...]

71 Adv anced Setup —Continued SurrBack *3*4 Small: Select if the surround back speakers are small (default). Large: Select if the surround back speakers are lar ge. None: Select if no surround back speakers are connected. SurrBack Ch *5 2ch: Select if two (left and right) surro und back speakers are connected. 1ch: Select if only one surround ba [...]

72 Adv anced Setup —Continued Unit fe et: Distances can be set in feet. Range: 1 to 30 feet in 1-foot steps. meters: Distances can be set in meter s. Range: 0.3 to 9 meters in 0.3-meter steps. Front, Center, SurrRight, SurrBack Righ t, SurrBack Left, SurrLeft, Subwoofer Specify the distance from the each speak er to your listening position. 5. Le[...]

73 Adv anced Setup —Continued W ith the Audio Adjust functions and settings, you can adjust the sound and listening modes as you like. A udio Adjust Settings 7. Audio Adjust Multiplex/M ono Settings Input (Mux) Main : The main channel is output ( default). Sub: The sub channel is output. M/S: Both the main and sub channels are output. This settin[...]

74 Adv anced Setup —Continued Dolby EX Input Signal Setting Dolby EX Au t o : When the source is Dolby EX, you can select the Dolby EX listening mode. Manual: When the source is Dolby EX, you can select any o f the listening modes compatible with this format (e.g., Dolb y EX, Dolby Pro Logic IIx, etc.) (default). This setting determines how Dolb [...]

75 Adv anced Setup —Continued This section e xplains items on the Hardware menu. Hard ware Setup 8. Hardware Remote ID When se veral Onkyo components are used in the same room , their remote ID codes ma y ov erlap. T o differentiate the A V receiv er from the other components, you can chan ge its remote ID from 1, the default, to 2 or 3. Remote I[...]

76 Adv anced Setup —Continued Y ou can change var ious audio settings by pressin g the [A UDIO] button. Using the A udio Settings RECEIVER AU D I O qwer 1 Press the [RECEIVER] button f ollowed by the [A UDIO] button. 2 Use the Up and Down [ q ]/[ w ] b u ttons to select an ite m. 3 Use the Left and Right [ e ]/[ r ] buttons to change the setting.[...]

77 Adv anced Setup —Continued Au dyssey Dynamic V olume™ Dyn V ol See “Dyn V ol” of “ Audio Adjust Settings” on page 74. Music Optimi zer The Music Optimizer function en hances the sound quality of compressed music f iles. Use it with music files that use “lossy” compression, such as MP3. Note: The Music Optimizer function only work[...]

78 Contr olling Other Components Y ou can control your D VD player, CD player , and other components with the A V rece i ver’ s remote controller . T o control another component , you must fi rst enter that component’ s remote control code to a REMO TE MODE button. This section explains ho w to enter remote control codes and how to control your[...]

79 Contr olling Other Components —Continued Remote Contr ol Codes for Onkyo Components Conn ected via u Onkyo components that are connected via u are controlled by pointing the remote controller at the A V receiv er, not the component. This allows you to control components that are out of vie w , in a rack, for example. If you want to control an [...]

80 Controlling Other Components —Continued By pressing the REMO TE MODE button that’ s been programmed with the remote control code for your D VD player (HD D VD, Blu-ray , or TV/DVD combination), you can control your player w ith the follo wing buttons. The [D VD/BD] button is preprogrammed with the remote control code for controlling an Onkyo[...]

81 Contr olling Other Components —Continued By pressing the REMO TE MODE button that’ s been programmed with the remote control code for your CD player , CD recorder, or MD player , you can control your player with the follo wing buttons. The [CD] button is preprogrammed with the remote control code for controlli ng an Onkyo CD player . For det[...]

82 Controlling Other Components —Continued By pressing the REMO TE MODE button that’ s been programmed with the remote contr ol code for your cassette recorder , you can cont rol your cassette recorder with the following b uttons. The [TV/T APE] b utton is preprogrammed with the remote control code for c ontrolling an Onkyo cassette recorder wh[...]

83 Contr olling Other Components —Continued By pressing the REMO TE MODE button that’ s been programmed with the remote control code for your Dock, you can control your iPod in the Dock with the following b uttons. For some RI docks, the “ON/ST ANDBY” b ut ton may not work with a remote control code 82990 (without u ). In this case, make an[...]

84 T roub leshooting If you hav e any trouble using the A V receiver, look for a solution in this section. If you can’ t resolve the issue yourself, contact your Onkyo dealer . Can’t turn on the A V rec eiver • Make sure that the power cord is plugged into the w all outlet properly . • Unplug the po wer cord from the wa ll outlet, w ait 5 s[...]

85 T r oubleshooting —Continued The subwoofer produces no sound • The subwoofer outputs no sound while only speaker set B is on. T urn on speaker set A. • If the source material c ontains no audio in the LFE channel, the subw oofer produces no sound. • Check the “3. Sp Conf ig” (page 70). • On the A V recei ver , the subwoofer setting[...]

86 T r oubleshooting —Continued • Make sure that the A V receiver is not subjected to direct sunshine or in vert er-type fluorescent lights. Relocate if necessary . • If the A V rece iv e r is instal led in a rack or cabinet with colored-glass doors , the remote controller may not work reliably when the doors are closed. • Make sure you’ [...]

87 T r oubleshooting —Continued The f ollowin g settings can be made f or the composit e video inputs Y ou must use the b uttons on the unit to make these settings. 1. While holding do wn the input selector button for the input source that you want to set, press the [SETUP] bu tton. 2. Use the Left and Right [ e ]/[ r ] b uttons to change the set[...]

88 Specifications Amplifier Section Video Section Tu n e r S e c t i o n General ■ Video Inputs ■ Video Outputs ■ Audio Inputs ■ Audio Outputs ■ Contr ol T erminal Specifications and features ar e subject to change without notice. HT -R570 Rated Outpu t Power 130 watts minimum cont inuous powe r per channel, 6 ohms , at 1 kHz with a max i[...]

89 Specifications —Continued ■ Subwoofer (SKW -570) ■ Front Speaker (SKF-570) ■ Center Speaker (SKC-57 0) ■ Surround/Surround Back Speaker (SKR-570/SKB-570) Specifications and features ar e subject to change without notice. HTP-570 T ype: Bass-refle x Input sensiti vity/ Impedance: 140 mV/20 k Ω Maximum out put power: 290 W (Dy namic po[...]

90 Memo HT-S5200_En.book 90 ページ ２０ ０９年３月９ 日　月曜日　午後 ４時３１分[...]

91 Memo HT-S5200_En.book 91 ページ ２０ ０９年３月９ 日　月曜日　午後 ４時３１分[...]

92 SN 29344934 Y0902-1 (C) Copyright 2009 ONKY O CORPORA TION Japan. All rights reser ved. http://www.onkyo.com/ HOMEPAGE Sales & Product Planning Div . : 2-1, Nisshin-cho, Ne yagawa-shi, OSAKA 572-8540, J AP AN T el: 072-831-8023 F ax: 072-831-8163 ONKY O U.S.A. CORPORA TION 18 P ar k W ay , Upper Saddle Riv er, N.J . 07458, U.S .A. T el: 201-[...]