Ir a la página of
manuales de instrucciones parecidos
-
Stereo System
Onkyo TA-RW255
16 páginas 0.39 mb -
Stereo System
Onkyo HT S5100
96 páginas 4.44 mb -
Stereo System
Onkyo TX-8255
36 páginas 1.99 mb -
Stereo System
Onkyo T-405X
32 páginas 0.82 mb -
Stereo System
Onkyo TX-DS595
52 páginas 2.51 mb -
Stereo System
Onkyo HT-S7300
76 páginas 2.23 mb -
Stereo System
Onkyo TA-RW344
20 páginas 0.29 mb -
Stereo System
Onkyo TX-SR705
228 páginas 11.63 mb
Buen manual de instrucciones
Las leyes obligan al vendedor a entregarle al comprador, junto con el producto, el manual de instrucciones Onkyo HT-S6200. La falta del manual o facilitar información incorrecta al consumidor constituyen una base de reclamación por no estar de acuerdo el producto con el contrato. Según la ley, está permitido adjuntar un manual de otra forma que no sea en papel, lo cual últimamente es bastante común y los fabricantes nos facilitan un manual gráfico, su versión electrónica Onkyo HT-S6200 o vídeos de instrucciones para usuarios. La condición es que tenga una forma legible y entendible.
¿Qué es un manual de instrucciones?
El nombre proviene de la palabra latina “instructio”, es decir, ordenar. Por lo tanto, en un manual Onkyo HT-S6200 se puede encontrar la descripción de las etapas de actuación. El propósito de un manual es enseñar, facilitar el encendido o el uso de un dispositivo o la realización de acciones concretas. Un manual de instrucciones también es una fuente de información acerca de un objeto o un servicio, es una pista.
Desafortunadamente pocos usuarios destinan su tiempo a leer manuales Onkyo HT-S6200, sin embargo, un buen manual nos permite, no solo conocer una cantidad de funcionalidades adicionales del dispositivo comprado, sino también evitar la mayoría de fallos.
Entonces, ¿qué debe contener el manual de instrucciones perfecto?
Sobre todo, un manual de instrucciones Onkyo HT-S6200 debe contener:
- información acerca de las especificaciones técnicas del dispositivo Onkyo HT-S6200
- nombre de fabricante y año de fabricación del dispositivo Onkyo HT-S6200
- condiciones de uso, configuración y mantenimiento del dispositivo Onkyo HT-S6200
- marcas de seguridad y certificados que confirmen su concordancia con determinadas normativas
¿Por qué no leemos los manuales de instrucciones?
Normalmente es por la falta de tiempo y seguridad acerca de las funcionalidades determinadas de los dispositivos comprados. Desafortunadamente la conexión y el encendido de Onkyo HT-S6200 no es suficiente. El manual de instrucciones siempre contiene una serie de indicaciones acerca de determinadas funcionalidades, normas de seguridad, consejos de mantenimiento (incluso qué productos usar), fallos eventuales de Onkyo HT-S6200 y maneras de solucionar los problemas que puedan ocurrir durante su uso. Al final, en un manual se pueden encontrar los detalles de servicio técnico Onkyo en caso de que las soluciones propuestas no hayan funcionado. Actualmente gozan de éxito manuales de instrucciones en forma de animaciones interesantes o vídeo manuales que llegan al usuario mucho mejor que en forma de un folleto. Este tipo de manual ayuda a que el usuario vea el vídeo entero sin saltarse las especificaciones y las descripciones técnicas complicadas de Onkyo HT-S6200, como se suele hacer teniendo una versión en papel.
¿Por qué vale la pena leer los manuales de instrucciones?
Sobre todo es en ellos donde encontraremos las respuestas acerca de la construcción, las posibilidades del dispositivo Onkyo HT-S6200, el uso de determinados accesorios y una serie de informaciones que permiten aprovechar completamente sus funciones y comodidades.
Tras una compra exitosa de un equipo o un dispositivo, vale la pena dedicar un momento para familiarizarse con cada parte del manual Onkyo HT-S6200. Actualmente se preparan y traducen con dedicación, para que no solo sean comprensibles para los usuarios, sino que también cumplan su función básica de información y ayuda.
Índice de manuales de instrucciones
-
Página 1
E n 7.1ch Home Theater System HT-S6200 A V Receiv er (HT -R670) Speaker P ackage (HTP-670) Front Speak ers (SKF-670) Center Speaker (SKC-670) Surround Speak ers (SKR-670) Surround Back Speak ers (SKB-670) Po were d Subw oofer (SKW -770) Dock f or iP od (UP-A1) Instruction Manual Thank you for purchasing an Onkyo 7.1ch Home Theater System. Please re[...]
-
Página 2
2 Impor tant Safety Instructions 1. Read these ins tructions. 2. Ke ep these instru ctions. 3. Heed all warnings. 4. Follo w all instructi ons. 5. Do not use this apparatus near w ater . 6. Clean only with dry cloth. 7. Do not block an y ventil ation openings. Install in accordance with the manuf acturer’ s instructions. 8. Do not install near an[...]
-
Página 3
3 Precautions 1. Recording Copyright —Unless it’ s for personal use only , recording cop yrighted material i s ille gal without the permission of the copyright holder . 2. A C Fuse —The A C fuse inside the unit is not user- serviceable. If you cannot turn on the unit, contact your Onkyo dealer . 3. Care —Occasionally you should dust the uni[...]
-
Página 4
4 Speaker Precautions Placement • The subwoofer cabinet is made out o f wood and is therefore sensiti v e to extreme te mperatures and humidity , do not put it in lo cations subject to direct sunlight or in humid places, such as near an air condi- tioner , humidif ier , bathroom, or kitchen. • Do not put w ater or other liquids close to the spe[...]
-
Página 5
5 P ac kage Contents —Continued *I n catalogs a nd on packagi ng, the let ter at the end of the pr oduct name indicate s the color. Specifications and operatio n are the same regardless of colo r . Speaker P ac ka ge HTP-670 Speaker cable for fr ont speakers and center speaker Front speaker s 11 ft (3.5 m) Center speaker 10 ft (3.0 m) Speaker cab[...]
-
Página 6
6 Contents * T o reset the A V r eceiv er to its fa ctory defau lts, turn it on and, while hol ding down the [VCR/DVR] button, press the [ON/ ST ANDBY] b utton (s ee page 93). Intr oduction Important Safety Instructions ..................................... 2 Precautions............... ................................................. 3 Speaker Pre[...]
-
Página 7
7 Features Amplifier • 130 W atts/Channel @ 6 ohms • 160 W atts/Channel @ 6 ohms (JEIT A) • WRA T -Wide Range Amplif ier T echnology • High-Current Lo w-Impedance Dri v e • Optimum Gai n V olume Circuitry • H.C.P .S. (High Current Power Supply) Massi ve High Power T ransformer Pr ocessing • Dolby T rueHD *1 and DTS *2 -HD Master Audio[...]
-
Página 8
8 Features —Continued • Easily links all iPhone, iP od T ouch (1G, 2G), iPod Classic, iPod (4G, 5G), iP od nano (1G, 2G, 3G, 4G), iPod mini with Onkyo A/V Systems *1 Manufac tured under lic ense from Do lby Lab oratories. “D olby” , “Pro Logic” an d the double -D symbol are tr ademarks of D olby Laborato ries. *2. Manufac tured under li[...]
-
Página 9
9 Multir oom Capability Y ou can use two speake r systems with this A V receiver —a surround-sound speak er system (up to 7.1 channels) in your main listening room, a stereo speaker system in a seco nd room, or Zone 2, as we call it. An d, you can select a differ ent audio source for each room. Main Room: In your main listening room, you can enjo[...]
-
Página 10
10 Fr ont & Rear P anels The actual front panel has v arious logos printe d on it. They are not sho wn here for clarity . The page numbers in parentheses show where you can f ind the main explanation for each item. a ON/ST ANDBY button (40) Sets the A V receiv er to On or Standby . b ST ANDBY indicator (40) Lights up when the A V receiver is on[...]
-
Página 11
11 Fr ont & Rear P anels —Contin ued For detaile d information, se e the pages in parentheses. i GAME button (61) Selects the listening mode s intended for use with video games. j DIMMER button (51) Adjusts the display brightness. k MEMOR Y button (56) Used when storing or deleting radio presets. l TUNING MODE button (54) Selects the Auto or [...]
-
Página 12
12 Front & Rear P anels —Continued a DIGIT AL IN CO AXIAL 1 and 2 These coaxial digital audio inputs are for connecting components with a coaxial digital audio output, such as a CD player or D VD/BD player . They’ re assignable, which means you can assign each one to an input select or to suit your setup. See “Digital Input Setup” on pa[...]
-
Página 13
13 Fr ont & Rear P anels —Contin ued j u REMO TE CONTROL This u (Remote Interactiv e) jack can be connected to the u jack on another u -capable Onkyo component for remo te and system control. To u s e u , you must make an analo g audio connection (RCA) between th e A V receiv er and the other component, e ven if they are connected digitally .[...]
-
Página 14
14 Speaker P a c kage For detailed information, se e th e pages in parentheses. ■ Front ■ Rear a ST ANDBY/ON indicator W ith the Auto Standby function, the SKW -770 automatically turns on when an input signal is detected in Standby mode . Wh en there’ s no input signal for a while, th e SKW -770 automatically enters Standby mode. b PO WER s w[...]
-
Página 15
15 Speaker P ac kage —Continued ■ Rear a Ke yhole slots These keyhole slots can be used to wa ll-mount the speaker . See page 21 for mounting instructions. b Speaker terminals These push terminals are for connecting the speaker to the HT -R670 with the supplied speaker cables. The supplied speaker cables are color-coded for easy identification.[...]
-
Página 16
16 Remote Contr oller Notes: • If the remote controller doesn’ t work reliably , try replacing the batteries. • Don’ t mix new and old batteries or dif ferent types of batteries. • If you intend not to use th e remote controller for a long time, remove the batteries to prevent damage from leakage or corrosion. • Expired batteries should[...]
-
Página 17
17 Remote Controller —Contin ued For detaile d information, se e the pages in parentheses. a ON/ST ANDBY button (40) Sets the A V rece iv er to On or Standb y . b REMO TE MODE/INPUT SELECT OR buttons (49, 58, 86–92) Selects the remote contro ller modes and the input sources. c Arrow [ q ]/[ w ]/[ e ]/[ r ] and ENTER buttons Used to select and a[...]
-
Página 18
18 About Home Theater Thanks to the A V receiv er’ s superb capabilities, you can enjoy surround soun d wi th a real sense of movement in your ow n home—just like being in a movie th eater or concert hall. Y o u can enjoy D VDs featuring Dolb y Digital or DTS. W ith analog or digital TV , you can enjoy Dolb y Pro Logic IIx, DTS Neo:6, or Onkyo?[...]
-
Página 19
19 Connecting the A V receiver Speaker Config uration For 7.1-channel surround-s ound playback, you need se ven speakers and a po wered subwoofer . The following table shows which channels you should use based on the number of speakers you ha ve. *1 If you’re using only one su rround bac k speaker, connect it to the power amplifie r’ s left te [...]
-
Página 20
20 Connecting the A V receiver —Contin ued Connecting the Speaker Cab les T erminal posts Push terminals The following illustration sh ows wh ich speaker should be connected to each pair of terminals for up to 7.1-channel playback. If you’ re using only one surround back speak er , conne ct it to the po wer amp lif ier’ s left terminals. Note[...]
-
Página 21
21 Connecting the A V receiver —Continued The speakers can easily be w all mounted by using the keyhole slots. T o mount the front or surround speakers vertically , use the keyhole slot sho wn to hang each speak er on a screw that’ s securely scre wed into the w all. Front speakers (SKF-670) Surround speak ers/Surround back sp eakers (SKR-670/S[...]
-
Página 22
22 Connecting the A V receiver —Contin ued The FR ONT L/R and SURR B A CK L/R terminal posts can be used with front speakers and surround back speakers respecti v ely , or bi-amped to pro vide separate tweeter and woofer feeds for front speak ers, providing improv ed bass and treble performance. • When bi-amping is used, the A V recei ver is ab[...]
-
Página 23
23 Connecting the A V receiver —Continued This section explains ho w to connect the supplied indoor FM antenna and AM loop ante nna, and how to connect commercially a v ailable outd oor FM and AM antennas. The A V receiv er won’ t pick up any radio signals without any an tenna connected, so you must connect the antenna to use the tuner . Connec[...]
-
Página 24
24 Connecting the A V receiver —Contin ued Connecting an Outdoo r FM Antenna If you cannot achie ve good reception with the supplied indoor FM antenna, try a commercially a vailable outdoor FM antenna instead. Notes: • Outdoor FM antennas work best outside, b ut usable results can sometimes be obta i ned when installed in an attic or loft. • [...]
-
Página 25
25 Connecting the A V receiver —Continued • Before making an y A V conne ctions, read the manuals supplied with your other A V components. • Don’ t connect the power cord until you’ ve completed and double-checked all A V connections. Optical Digi tal Jac ks The A V receiv er’ s optical digi tal jacks hav e shutter- type cov ers that op[...]
-
Página 26
26 Connecting the A V receiver —Contin ued By connecting both the audio a nd video outputs of your D VD player and ot her A V components to the A V receiver, you can switch the audio and video signals simultaneously simply by changing the input source on the A V recei ver. The A V receiv er supports se veral connecti on formats for compatibility [...]
-
Página 27
27 Connecting the A V receiver —Continued About HDMI Designed to meet the in crease d demands of digital TV , HDMI (High Definiti on Multimedia Interfa ce) is a new digi tal interface standard for connecting TVs, projectors, D VD players, set-top box es, and othe r video components. Until no w , se veral separate video and audio cables ha ve been[...]
-
Página 28
28 Connecting the A V receiver —Contin ued Making HDMI Connections ■ Video Signals Digital video signals receiv ed by th e HDMI IN jacks are normally output by the HDMI OUT for display on your TV . ■ A udio Signals Digital audio signals receiv ed by the HDMI IN jacks are output by the speakers and headphones connected to the A V receiv er. No[...]
-
Página 29
29 Connecting the A V receiver —Continued • W ith connection , you can listen to and re cord audio from your TV or listen in Zone 2. • T o enjoy Dolby Digital and DTS, use c onnection or . (T o record or listen in Zone 2 as well, use and , or and .) If your TV has no audio outputs, connect an audio output from your VCR or cable or satellite r[...]
-
Página 30
30 Connecting the A V receiver —Contin ued • W ith connection , you can listen to and record audio from a D VD or listen in Zone 2. • T o enjoy Dolby Digital and DTS, use co nnection or . (T o record or listen in Zone 2 as well, use and , or and .) • If your D VD player has main left and ri ght outputs and multichannel left and right output[...]
-
Página 31
31 Connecting the A V receiver —Continued W ith this hookup, you can use your VCR’ s tuner to li sten to your fa v orite TV programs via the A V receiv er, useful if your TV has no audio outputs. • W ith connection , you can listen to the VCR or D VR ev en in Zone 2. • T o enjoy Dolby Digital and DTS, use connection or . (T o listen in Zone[...]
-
Página 32
32 Connecting the A V receiver —Contin ued Notes: • The A V receiv er must be turned on for recording. Recording is not possible while it’ s on Standby . • If you w ant to record directly from your TV or another vid eo source without going thro ugh the A V recei ver, connect the audio and video outputs from your TV or other video component [...]
-
Página 33
33 Connecting the A V receiver —Continued W ith this hookup, you can use your satellite or cable recei ver to listen to your fa v orite TV programs via the A V receiv er, which is useful if your TV has no audio outputs. • W ith connection , you can listen to and record audio from the video source or listen in Zone 2. • T o enjoy Dolby Digital[...]
-
Página 34
34 Connecting the A V receiver —Contin ued Note: When it is connected at th e same time as A UX INPUT A U DI O L/R terminal, the input of POR T ABLE is give n priority to and outputted. Connecting a Camcor der , Game Console, or Other Device Connection A V receiver Signal flow Camcorder or console A UX INPUT VIDEO ⇐ Composite video output A UX [...]
-
Página 35
35 Connecting the A V receiver —Continued ■ CD Player or T urntab le (M M) with Built-in Phono Preamp • W ith connection , you can listen to and record audio from the CD player or listen in Zone 2. • T o connect the CD player digitally , us e connection or . (T o record or listen in Zone 2 as well, use and , or and .) ■ T urntable (MM) wi[...]
-
Página 36
36 Connecting the A V receiver —Contin ued • W ith connection , you ca n play and record or listen in Zone 2. • T o connect the recorder dig itally for playback, use conne ctions and , or and . Connecting a Cassette, CDR, MiniDisc, or D A T Recor der Connection A V receiver Signal flow Cass ette, CDR, MD, or D A T recorder TV/T APE IN L/R TV/[...]
-
Página 37
37 Connecting the A V receiver —Continued ■ If Y our iPod or iPhone Suppor ts Vide o: Connect your RI Dock’ s audio output jacks to the A V receiver’ s CBL/SA T IN or VCR/D VR IN L/R jacks, and connect its vide o output jack to th e A V receiv er’ s CBL/SA T IN or VCR/D VR IN V jacks. ■ If Y our iP od or iPhone Don’t Suppo rt Video: C[...]
-
Página 38
38 Connecting the A V receiver —Contin ued Notes: • Do not connect components other than the Uni versal Port Option Dock with the UNIVERSAL POR T jack. • While your iPod or iPhone is seated in the Dock, its battery will be charged wh en the A V recei ver is set to On or Standby . • When UP-A1 series Dock that seated iPod or iPhone is connec[...]
-
Página 39
39 Connecting the A V receiver —Continued Wi t h u (Remote Interacti ve), you can use the follo wing special functions: ■ Auto P o wer On/Standby When you start playback on a component connected via u , if the A V re ceiv er is on Standby , it will automatical ly turn on and select that component as the input source. Similarly , when the A V re[...]
-
Página 40
40 T urning On the A V receiver ON/ST ANDBY RECEIVER ON/ST ANDBY ST ANDBY indicator T urning On and Standby On the A V receiver, press the [ON/ST ANDBY] button. On the remote controller , press th e [RECEIVER] button, follo wed by the [ON/ST ANDBY] button. The A V receiv er comes on, the display li ghts up, and the ST ANDB Y indicator goes off. T o[...]
-
Página 41
41 Fir st Time Setup This section explains the settings that you need to make before using the A V receiv er for the very f irst time. If you connect a video component to an HDMI IN, you must assign that input to an input selector . For example, if you connect your D VD play er to HDMI IN1, you must assign HDMI IN1 to the D VD/BD input selector . N[...]
-
Página 42
42 First Time Setup —Contin ued If you connect a video component to a COMPONENT VIDEO IN, you must assign that input to an input selector . F or example, if you connect your D VD player to COMPONENT VIDEO IN 2, you must assign COMPONENT VIDEO IN 2 to the D VD/BD input selector . Notes: • If you connect an input co mponent (such as UP-A1 series [...]
-
Página 43
43 First Time Setup —Continued If you connect a component to a digital audio input, you must assign that input to an input selector . For example, if you connect your CD player to OPTICAL IN 1, you must assign OPTICAL IN 1 to the CD input select or . These are the default assignments. Notes: • When an HDMI IN is assigne d to an input selector i[...]
-
Página 44
44 First Time Setup —Contin ued If the impedance of any speaker is 4 ohms or more b ut less than 6, set the Speaker Impedance to 4 ohms. North American models do not support speakers with an impedance of less than 6 ohms. T o use bi-amping, you must change the Speak er T ype setting. For hookup inform ation, see page 22. Notes: • When bi-amping[...]
-
Página 45
45 First Time Setup —Continued If you connect an u -ca pable Onkyo RI Dock to the TV/T APE IN, CBL/SA T IN or VCR/D VR IN jacks, for u to work properly , you mu st change this setting. This setting can only be changed on the A V receiver. Note: DOCK can be selected for the TV/T APE , CBL/SA T or VCR/D VR input selector , b u t not at the same tim[...]
-
Página 46
46 First Time Setup —Contin ued W ith the supplied calibrated microphone, Audyssey 2EQ automatic ally determines the num ber of speakers connected, their size for purposes of bass management, optimum cros sove r frequencies to the subwoofer (if present), and distances from the primary listening position. Audyssey 2EQ then remov es the distortion [...]
-
Página 47
47 First Time Setup —Continued Using Audysse y 2EQ™ Notes: • Before starting Audyssey 2EQ™ Room Correction and Speaker Setup, arrange the room and connect the speakers as you would fo r enjoying movies. Changes to the room after auto setup requires you run the auto setup again, as room EQ characteristics may hav e changed. • When starting[...]
-
Página 48
48 First Time Setup —Contin ued Notes: • When the room co rrection and speaker setup is complete, the Equalizer Settings (page 70) will be se t to “Audyssey” and the “Dynamic EQ” (page 72) will be set to “On”. • Y ou can cancel the Room Correction and Speaker Setup at any point in this procedure simply b y disconnecting the setup [...]
-
Página 49
49 Basic Operations Basic A V receiver Operation 1 Use the A V r eceiver’ s inpu t selector buttons to select an input source. T o select an input so urce with the remote contr oller , press its [RECEIVER] bu tton, and then use its INPUT SELECT OR buttons. 2 Start playback on the source component. T o watch a BD, D VD, or other video source , on [...]
-
Página 50
50 Basic Oper ations —Continued This section explains functions that can be used with an y input source. Y ou can adjust the bass and treble for the front speakers, except when the Direc t, Pure Audio listening mode is selected. ■ Bass Y ou can boost or cut lo w-frequency sounds output b y the front speakers from –10 dB to +10 dB in 2 dB step[...]
-
Página 51
51 Basic Operations —Continued Y ou can adjust the brightness of the display . Y ou can temporarily mute the output of the A V recei ver. T o unmute the A V receiv er, press the remot e controller’ s [MUTING] b utton again, or adjust the volume. The outp ut is unmuted and the MUTING indicator goes off. Muting is cancelled when the A V receiv er[...]
-
Página 52
52 Basic Oper ations —Continued The Music Optimizer func tion enhances the sound quality of compressed music files. Use it with music files that use “lossy” compression, such as MP3. Note: The Music Optimizer function only works with PCM digital audio input signals with a sa mpling rate below 48 kHz and analog audio input signals. The Music O[...]
-
Página 53
53 Listening to the Radio For AM/FM tuning to work properly , you must specify the AM/FM frequency step used in your area. Note that when this setting is cha nged, all radi o presets are deleted. Note: This procedure can also be performed on the A V receiv er by using its [SETUP] b u tton, arro w buttons, and [ENTER] button. AM/FM Frequency Step Se[...]
-
Página 54
54 Listening to the Radio —Continued W ith the b uilt-in tuner , you can enjoy AM and FM radio stations and store your f av orite stations as presets for easy selection. Listening to the Radio T uning into AM/FM Radio Stations ■ Auto T uning Mode When tuned into a station, the TUNED indicator appears. When tuned into a stereo FM station, the FM[...]
-
Página 55
55 Listening to the Radio —Continued ■ T uning into Stations b y Frequency Y ou can tune into AM and FM stations directly by entering the appropriate frequenc y . Displaying AM /FM Radio Inf ormation 1 Press the [TUNER] button repeatedly to select “AM” or “FM”, f ollowed by the [D .TUN] button. (Actual display depends on country .) 2 Wi[...]
-
Página 56
56 Listening to the Radio —Continued Y ou can store a combination of up to 40 of your f av orite AM and FM radio stations. Deleting Pres ets Selecting Presets Presetting AM/FM Stations 1 T une into the AM or FM station y ou want to store as a preset. 2 Press the [MEMOR Y] button. The preset number flashes. 3 While the preset number is flashing (a[...]
-
Página 57
57 UP-A1 series Doc k f or iP od/iPhone W ith the UP-A1 series Dock, you can easily play the music, photo, or movie stored on your Apple iPod or iPhone through the A V receiv er and enjoy great sound. Y ou can use the A V receiv er’ s remote controller to operate your iPod or iPhone. ■ Made for: • All iPho ne models • iPod touch (2nd genera[...]
-
Página 58
58 UP-A1 series Dock for iP od/iPhone —Continued Operating Notes: • Before selecting a differen t input source, stop iPod or iPhone playback to pre v ent the A V re ceiv er from selecting the iPod or iPhone input source by mistake. • If any accessories are connected to your iPod or iPhone, the A V rec eiv er may not be able to select the inpu[...]
-
Página 59
59 UP-A1 series Doc k fo r iP od/iPhone —Continued a Arrow [ q ]/[ w ] and ENTER b uttons Used to navig ate me nus and sele ct item s. b Previous [ 7 ] button Restarts the current song. Pr ess it twice to select the pre vious song. c Rewind [ 5 ] b utton Press and hold to rewind. d P ause [ 3 ] button Pauses playback. e REPEA T button Used with t[...]
-
Página 60
60 Recor ding This section explains ho w to record the input source and how to r ecord audio and vi deo from separate sources. Notes: • The surround sound and DSP listening modes cannot be recorded. • Copy-protected D VDs cannot be recorded. • Sources connected to a digital input cannot be recorded. Only analog inputs can be recorded. • DTS[...]
-
Página 61
61 Using the Listening Modes For a description of each lis tening mode, see “ About the Listening Modes” on page 66. Selecting on th e A V receiver ■ [PURE A UDIO] b utton (Asian mod els) This button selects the Pu re Audio listening mode. When this mode i s selected, th e A V recei ver’ s display is turned off and only the HDMI outputs out[...]
-
Página 62
62 Using the Listening Modes —Continued Mono/Multiplex Sour ces ✔ : A vailable Listening Modes Notes: *1 Pure Audio l istening mod e is not available for No rth America n models. *2 Which Front h igh speak ers or Surrou nd back speak ers output s the sound is sw itched b y the “SpLayo ut” setting on page 74. • A vailable sampling rate for[...]
-
Página 63
63 Using the Listening Modes —Continued Stereo Sour ce ✔ : A vail able Li stening Modes Notes: *1 Pure Audio listening mo de is not available for North Americ an models. *2 Which Front high spea kers or Surrou nd back sp eakers output s the sou nd is swit ched by the “SpLa yout” sett ing on page 74. *3 If there are no surr ound back speaker[...]
-
Página 64
64 Using the Listening Modes —Continued 5.1 channe l Sour ces ✔ : A vailable Listening Modes Notes: *1 Pure Audio l istening mod e is not available for No rth America n models. *2 Which Front h igh speak ers or Surrou nd back speak ers output s the sound is sw itched b y the “SpLayo ut” setting on page 74. *3 A V receiver can input th e DSD[...]
-
Página 65
65 Using the Listening Modes —Continued 7.1 chan nel Sour ces ✔ : A vail able Li stening Modes DTS-ES Discret e/Matrix Sour ces Notes: *1 Pure Audio listening mo de is not available for North Americ an models. *2 Which Front high spea kers or Surrou nd back sp eakers output s the sou nd is swit ched by the “SpLa yout” sett ing on page 74. *[...]
-
Página 66
66 Using the Listening Modes —Continued The A V receiv er’ s listening modes can transform your listening room into a movie th eater or concert hall, with high fidelity and stunning surround sound. Pure A udio In this mode, the display a nd video circuitry are tu rned off, minimizing possi ble noise sources fo r the ul timate in high-fidelity r[...]
-
Página 67
67 Using the Listening Modes —Continued DTS-ES Matrix This mode is for use with DTS-ES Matrix soundtracks, which use a matrix-encoded back-channel for 6.1/7.1- channel playback. Use it with D VDs that bear the DTS- ES logo, especial ly those with a DTS-ES Matrix soundtrack. DTS Neo:6 This mode expands an y 2-ch annel source for up to 7.1- channel[...]
-
Página 68
68 Adv anced Setup Note: This procedure can also be perform ed on the A V recei ver by using its [SETUP] b utton, arro w buttons, and [ENTER] button. This section explains ho w to check the speaker settings and ho w to set them manually , which is useful if you change a speaker after performing the Audysse y 2E Q™ Room Correction and Speak er Set[...]
-
Página 69
69 Adv anced Setup —Continued LPFofLFE 80 Hz, 90 Hz, 100 Hz (default), 120 Hz (Low-P ass Filter for the LFE Channel) This setting i s not set autom atically b y the Au dys sey 2EQ™ Room Correction an d Speaker Setup function (see page 46). W ith this setting, you can specify the cutoff frequency of the LFE channel’ s lo w-pass filter (LPF), w[...]
-
Página 70
70 Adv anced Setup —Continued 2-4. Level Cal (Speaker Le vels Calibration) These settings are se t automatically b y the Audysse y 2EQ™ Room Correction a nd Speaker Setup function (see page 46). Y ou can set the volume le v el of each speak er so that all sp eak ers can be heard equally at the listeni ng position. A pink noise test tone is outp[...]
-
Página 71
71 Adv anced Setup —Continued W ith the Audio Adjust functions and settings, you can adjust the sound and listening modes as you like. A udio Adjust 3. Audio Adjust 3-1. Mux/Mono (Multiplex/Mono) Input (Mux) M ain : The main channel is output ( default). Sub: The sub channel is output. M/S: Both the main and sub channels are output. This setting [...]
-
Página 72
72 Adv anced Setup —Continued 3-3. DTS Neo:6 Music Cen ter Im age 0 to 5 (default: 2) The DTS Neo:6 Music listening mode creates 6-channe l surround sound from 2-channel stereo sources. W ith this setting, you can specify by how much the front left and right channel output is attenua ted in order to create the center channel . Setting a value [0][...]
-
Página 73
73 Adv anced Setup —Continued Y ou can change various audio settings b y pressing the [A UDIO] b utton. Note: When the “AudioTV Out” setting is set to “On” (page 78), the [A UDIO] b utton is disabled. Using the A udio Settings RECEIVER A UDIO qwer 1 Press the [RECEIVER] button f ollow ed by the [A UDIO] button. 2 Use the Up and Down [ q ][...]
-
Página 74
74 Adv anced Setup —Continued CinemaFIL TER W ith the CinemaFIL TER, you can soften ov erly bright movie soundtracks, which are typically mixed for reproduction in a movie theater . CinemaFIL TER can be used with the follo wing listening modes: Dolb y Digital, Dolby Digita l EX, Dolby Digital Plus, T rueHD, Dolby Pro Logic IIx Movie, Do lby Pro L[...]
-
Página 75
75 Adv anced Setup —Continued Y ou can assign a default list ening mode to each input source that will b e sele cted automatically when you select each input source. For e xample, you can set the default listening mode to be used with Dolby Digita l input signals. Y ou can sele ct other list ening modes during playback, bu t the mode specif ied h[...]
-
Página 76
76 Adv anced Setup —Continued This section explai ns items on the “S ource Setup” menu. Items can be set individuall y for each input selector . IntelliV olum e W ith IntelliV olume, you can set the input level for each input selector indi vidually . This is useful if one of your source components is louder or quieter than the others. Use the[...]
-
Página 77
77 Adv anced Setup —Continued This section explains t he items on the “ Miscellaneous” menu. Note: This procedure can also be performed on the A V recei ver by using its [SETUP] b utton, arro w buttons, and [ENTER] button. V olume Setup ■ MaxV olume W ith this settin g, you can limit the maximum v olume. The Maximum V olume range is “Off?[...]
-
Página 78
78 Adv anced Setup —Continued This section explains item s on the “Hardware Setup” menu. Note: This procedure can also be performed on the A V recei ver by using its [SETUP] b u tton, arro w buttons, and [ENTER] button. Remote ID ■ Remote ID When sev eral Onkyo components are used in the same room, their remote ID co des may ov erlap. T o d[...]
-
Página 79
79 Adv anced Setup —Continued ■ LipSync The A V recei ver can be set to automatically co rrect any delay between the video and th e audio, based on the data from the connected monitor . Notes: • This function works only if your HDMI-compatible TV supports HDMI Lip Sync. • Y ou can check the amount of delay being applied by the HDMI Lip Sync[...]
-
Página 80
80 Zone 2 In addition to your main listen ing room, you can also enjoy playback in the other room, or as we call Zone 2. And, you can select a different source for each room. Connecting Y our Zone 2 Speaker s Directl y to the A V receiver This setup allows 5.1-cha nnel playback in your main room and 2-channel stereo playback in Zone 2, with a diffe[...]
-
Página 81
81 Zone 2 —Continued If you’ v e connected your Zone 2 speakers to the A V receiv er, as e xplained in “Connecting Y our Zone 2 Speakers Directly to the A V receiv er” on page 80, you must set the “PwrdZ2” (Po wered Zone 2) setting to “Act” (Acti v ated). Notes: • When “Act” is selected and Zone 2 turned on, the Zone 2 speaker[...]
-
Página 82
82 Zone 2 —Continued This section explains ho w to turn Zone 2 on and of f, how to select an input source for Zone 2, and how to adjust the vo lume for Zone 2. Contro lling Zone 2 fr om the A V receiver Notes: • Only analog input sources are output by Zone 2. Digital input sources are not output. If no sound is heard when an input source is sel[...]
-
Página 83
83 Zone 2 —Continued Adjusting the V olume of Zones Muting Zones Note: Zones can also be unmuted by adjusting the v olume. On the remote contr oller , press the [ZONE 2] button, and then use the V OL [ q ]/[ w ] bu tton. A V receiver On the A V receiver, press the [ZONE 2] button (the ZONE 2 indicator and Zone 2 sele ctor on the display flashes) [...]
-
Página 84
84 Contr olling Other Components Y ou can control your D VD player , CD player, and other components with the A V rece i ver’ s remote controller . T o control another component , you must f irst enter that component’ s r emote control code to a REMO TE MODE button. This section explains ho w to enter remote control codes and how to control you[...]
-
Página 85
85 Contr olling Other Components —Continued Onkyo components that are connected via u are controlled by pointing the remote controller at the A V receiv er, not the component. This allo ws you to control components that are out of vie w , in a rack, for example. If you want to control an Onk yo component by pointing the remote controller directly[...]
-
Página 86
86 Controlling Other Components —Contin ued By pressing the [TV] button that’ s been programmed with the remote control code for your TV (TV/D VD combination or TV/VCR combination), you can control your TV with the follow ing buttons. For details on entering a remote control code for a different componen t, see page 84. The [TV] button is prepr[...]
-
Página 87
87 Contr olling Other Components —Continued By pressing the REMO TE MODE button that’ s been programmed with the remote control code for your D VD player (Blu-ray , HD D VD, or TV/D VD combination), you can control your player with the follo wing b uttons. The [D VD/BD] b utton is preprogrammed with the remote control code for controlling an On[...]
-
Página 88
88 Controlling Other Components —Contin ued u CLR button Cancels functions and cl ears entered numbers. Notes: • If you enter the remote control code for a HD D VD or Blu-ray player that has A, B, C, and D or colored buttons, the [SEARCH], [REPEA T], [RANDOM], and [PLA Y MODE] buttons will w ork as colored or A, B, C, D buttons. In this ca se, [...]
-
Página 89
89 Contr olling Other Components —Continued By pressing the REMO TE MODE bu tton that’ s been programmed with the remote control code for your satellite re cei ver , cable recei ver , or D VD re corder (DBS/PVR combination or ca ble/PVR combination), you can control your player with the follo wing b uttons. For details on entering a re mote con[...]
-
Página 90
90 Controlling Other Components —Contin ued By pressing the REMO TE MODE b utton that’ s been programmed with the remote contr ol code for your CD player , you can control your player with the follo wing buttons. The [CD] b utton is preprogrammed with the remote control code for controlling an Onkyo CD player . For details on entering a remote [...]
-
Página 91
91 Contr olling Other Components —Continued By pressing the REMO TE MODE button that’ s been programmed with the remote control code for your Dock, you can control your iPod in the Dock with the following b uttons. For some RI docks, th e “ON/ST ANDBY” button may not work with a remote control cod e 82990 (without u ). In this case, make an[...]
-
Página 92
92 Controlling Other Components —Contin ued By pressing the REMO TE MODE button that’ s been programmed with the remote contr ol code for your cassette recorder , you can cont rol your cassette recorder with the following b uttons. The [TV/T APE] button is preprogrammed with the remote control code for c ontrolling an Onkyo cassette recorder wh[...]
-
Página 93
93 T roub leshooting If you hav e any trouble using the A V receiv er, look for a solution in this section. If you can’ t resolve the issue yourself, contact your Onkyo dealer . Can’t turn on the A V receiver • Make sure that the po wer cord is plugged into the w all outlet properly . • Unplug the power cord from the wall out let, wait 5 se[...]
-
Página 94
94 T roub leshooting —Continued The front high speaker s or surround bac k speakers produce no sound • Depending on the current liste ning mode, no sound may be produced by the front high speakers or surround back speakers. T ry another listening mode (page 61). • Not much sound may be produced by the fron t high speakers or surround back spe[...]
-
Página 95
95 T roub leshooting —Continued • If the message “Resolution Error” appears on the A V recei ver’ s display , this indicates that your TV does not support the current video resolution and you need to select another resolution on your D VD player . Reception is noisy , ster eo FM reception suffers from hi ss, or the FM STEREO indi cator do[...]
-
Página 96
96 T roub leshooting —Continued Can’t record • On your recorder , make sure the co rrect input is selected. • T o prevent signal loops and damage to the A V receiv er, input signals are not fed through to outputs with the sa me name (e.g., TV/T APE IN t o TV/T APE OUT or VCR/D VR IN to VCR/D VR OUT). • When the Pure Audio liste nin g mode[...]
-
Página 97
97 Specifications Amplifier Sect ion Video Section T uner Section General ■ Video Inputs ■ Video Outputs ■ A udio Inputs ■ A udio Outputs ■ Control T ermi nal Specifications and features ar e subject to change without notice. HT -R670 Rated Output Power North American: 130 watts minimum cont inuous power per channel , 6 ohms, at 1 kHz wit[...]
-
Página 98
98 Specifications —Continued ■ P owered Subwoo fer (SKW -770) ■ Front Speaker (SKF-670) ■ Center Speaker (SKC-670) ■ Surround /Surround Bac k Speaker (SKR-670/SKB-670) Specifications and features ar e subject to change without notice. HTP-670 T ype: Bass-reflex Input sens itivity/Impedance : 140 mV/20 k Ω Maximum output power: 290 W (Dy[...]
-
Página 99
99 Memo[...]
-
Página 100
100 SN 29344937 (C) Copyright 2009 ONKY O CORPORA TION Japan. All rights reserved. http://www.onkyo.com/ HOMEPAGE Sales & Product Planning Div . : 2-1, Nisshin-cho , Ne yaga wa-shi, OSAKA 572-8540, J AP AN T el: 072-831-8023 F ax: 072-831-8163 ONKY O U.S.A. CORPORA TION 18 P ark Wa y , Upper Saddle River , N.J . 07458, U.S .A. T el: 201-785-260[...]