Orion 14LD manual

Before operating the unit, please read this manual thoroughly. Operating Instructions 14" LCD TV with DVD Player 14LD TELETEXT Region / Region discs onl y[...]

W ARNING To prevent fire or shock hazard, do not expose this equipment to rain or moisture. MAINS SUPPL Y This unit is designed to operate from AC 240V 50Hz household mains supply. CAUTION: THIS UNIT IS A CLASS 1 LASER PRODUCT . HO WEVER THIS UNIT USES A VISIBLE LASER BEAM WHICH COULD CA USE HAZARDOUS RADIA TION EXPOSURE IF DIRECTED . BE SURE T O O[...]

1 FEA TURES CONTENTS PREPARATION PRECAUTIONS ......................................................... 2 LOCATION OF CONTROLS ...................................... 3 REMOTE CONTROL ................................................. 5 POWER SOURCE ..................................................... 7 ANTENNA CONNECTIONS ...........................[...]

2 Keep the unit away from flower vases, sink etc. Liquids spilled into the unit can cause serious damages. Switch OFF the Power Supply to the unit and consult a qualified service engineer before attempting to use the unit again. When you leave your home for a long period of time, unplug the AC mains lead. Do not place the unit on or near appliances[...]

3 LOCA TION OF CONTR OLS Headphones socket AUDIO (L/R)/VIDEO IN (A V IN 3) sockets PLA Y 1 button ST OP 3 button EJECT 5 button SKIP 7/6 buttons Left Side Right Side DISC slot Standby indicator Remote sensor Front POWER button VOLUME UP/DOWN buttons CHANNEL UP/DOWN buttons Top Handle[...]

4 LOCA TION OF CONTR OLS (CONTINUED) Rear Cable holder Approx. 15˚ Approx. 5˚ 0˚ Variable TV-screen angle You can adjust the angle of the TV-screen for 5˚ forward or for 15˚ backward from vertical angle. AUDIO (L/R)/VIDEO IN (A V IN 2) sockets DC input socket COAXIAL DIGIT AL AUDIO OUT socket RF IN socket SCAR T input sock et[...]

5 Po w er on/off 11,15,25,27 DISPLA Y Display TV or D VD operation status 16,25 TV/D VD Select to operate TV or D VD 10,11,15,25,26,27 (EJECT) Ejects the disc 27 0-9 Direct channel selection of TV 15 Input setting 30,33 Enter a security code 40,41,42 V OL +/– V olume Up/Down 15 MUTE Mute 16 0/A V Scar t Input or A V input 10,16 SLEEP Sleep timer [...]

6 REMOTE CONTROL Open the battery compart- ment cover in the direction of the arrow. Install two “AAA” batteries (supplied), paying attention to the polarity diagram in the battery compartment. Replace the compartment cover. INSERTING BATTERY OPERATION While pressing on both sides of the clip, remove it from the unit while pulling with an upwar[...]

7 AC adaptor (supplied) AC 240V, 50Hz TO USE A C PO WER 1. Connect the A C mains lead to the A C adaptor . 2. Connect the A C adaptor plug into this unit’ s DC input socket. 3. Connect the A C mains lead into an A C soc ket. 4. The Standby indicator will light. AC mains lead (supplied) NOTES: • Please make sure to insert the plug of each cord s[...]

8 Connect an indoor or outdoor antenna to the antenna socket at the rear panel as shown below. For all antenna circuit problems, please consult your local dealer. ANTENNA CONNECTIONS The type of antenna required depends on the position of your home, its distance from the transmitter and local interference. If you do not have an antenna and you are [...]

9 Using an A V Amplifier with built-in digital surr ound If you are using an Amplifier with a b uilt-in digital surround sound decoder (such as Dolby Digital / DTS / MPEG / etc.), y ou can connect it as sho wn below . Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. DTS an[...]

10 or AV1 Input Selection If you connect the unit to a VCR, camcorder or games console, you can select this input by pressing the 0/AV button. 3. To connect the unit to a camcorder Connect the camcorder to the unit as shown. Press the 0/AV button to select AV3 to use the TV as a monitor. Left SIDE of unit (A V IN 3) 2. To connect the unit to a TV G[...]

11 PICTURE NICAM AUTO OFF AUDIO LANGUAGE AV COLOUR AUTO LANGUAGE ON/OFF TIMER MENU PRESS: ▲ / ▼ / ENTER / MENU CH TUNING LANGUAGE SETTING This unit has 5 different languages for MENU set up which can be selected through the ON Screen Display: English, German, French, Italian or Spanish. 2 To select the LANGUAGE mode, press or , then press ENTER[...]

12 PICTURE NICAM AUTO OFF AUDIO LANGUAGE AV COLOUR AUTO LANGUAGE ON/OFF TIMER MENU PRESS: ▲ / ▼ / ENTER / MENU CH TUNING AUTOMATIC TUNING PRESETTING THE CHANNELS - Automatic tuning The stations will be preset in the order that they appear when the automatic tuning is activated. - Manual tuning In this mode the TV searches until a picture appear[...]

13 PICTURE NICAM AUTO OFF AUDIO LANGUAGE AV COLOUR AUTO LANGUAGE ON/OFF TIMER MENU PRESS: ▲ / ▼ / ENTER / MENU CH TUNING PRESETTING THE CHANNELS 2 Press or to select the MANUAL mode, then press ENTER . Press or until the picture appears on screen. If this is not your desired channel, press or until your desired channel appears. If you need to m[...]

14 PICTURE NICAM AUTO OFF AUDIO LANGUAGE AV COLOUR AUTO LANGUAGE ON/OFF TIMER MENU PRESS: ▲ / ▼ / ENTER / MENU CH TUNING PRESETTING THE CHANNELS TO CHANGE THE CHANNELS EXAMPLE: Changing of channel position from CH2 and CH5. 1 Press MENU . Press or to select the CH TUNING mode, then press ENTER . Press or to select the CH ALLOCATION mode, then p[...]

15 TV OPERA TIONS 1 Press Power on the top of the unit or remote control to turn on the unit. The standby indicator will go off. Press TV/DVD to select TV mode. Once you have correctly connected and set up the channels on your set, you can view the channels as follows. 2 Direct Channel Selection buttons (0-9) Press the Direct Channel Selection butt[...]

16 CONVENIENT FUNCTIONS The following functions are available from the remote control handset only. TV/AV Selection For receiving the desired signal: Press AV to select the TV or AV mode. TV position - to view a normal TV programme. AV position - to receive through the direct Video in- put. AV1 (from 21 pin SCART socket on the rear), AV2 (from Audi[...]

17 The on timer feature allows you to automatically turn on your TV after a preset amount of time (up to 12 hours and 59 minutes) on the selected channel. The off timer also allows you to turn off y our TV after a preset amount of time . Y ou can set the off timer in conjunction with the on timer . 1 Press MENU . Press ▲ or ▼ to select ON/ OFF [...]

18 PICTURE ADJUSTMENTS 1 Press MENU . PICTURE NICAM AUTO OFF AUDIO LANGUAGE AV COLOUR AUTO LANGUAGE ON/OFF TIMER MENU PRESS: ▲ / ▼ / ENTER / MENU CH TUNING The picture settings have been adjusted at the factory under optimum signal reception conditions. However, you can adjust for BRIGHTNESS, CONTRAST, COLOUR and SHARP- NESS to your preference.[...]

19 BASS 0 PRESS: B / A / C / D /MENU BALANCE 0 PRESS: B / A / C / D /MENU TREBLE 0 PRESS: B / A / C / D /MENU PICTURE NICAM AUTO OFF AUDIO LANGUAGE AV COLOUR AUTO LANGUAGE ON/OFF TIMER MENU PRESS: ▲ / ▼ / ENTER / MENU CH TUNING 1 Press MENU . Press or to select A UDIO . Then press ENTER . 2 If BASS ha s no t appeared, press or repeatedly until [...]

20 PICTURE NICAM AUTO OFF AUDIO LANGUAGE AV COLOUR AUTO LANGUAGE ON/OFF TIMER MENU PRESS: ▲ / ▼ / ENTER / MENU CH TUNING AV COLOUR ADJUSTING/NICAM STEREO SOUND 1 Press MENU . Press ▲ or ▼ to select the AV COLOUR mode. AV COLOR ADJUSTING When connecting external equipment to the unit, the picture may become black and white. This can be corre[...]

21 RECEPTION OF INTERFERENCE The most common types of television interference are as follows. IGNITION Black spots and horizontal streaks may appear, the picture may flutter or drift. This is usually caused by interference from car ignition system, neon lamps, electric drills or other electrical appliances. GHOSTING Ghosting is caused by the TV sig[...]

22 TELETEXT Most broadcasting stations off er a T eletext service in addition to their standard TV program. T eletext off ers news , weather f orecast, winning Lotto numbers , TV listings and other interesting ne ws. The te xt is received page b y page, as soon as y ou select the broadcasting station. A single page can be display ed on the screen. [...]

23 To call a teletext page Leaf through the pages with the PA GE ( M M M M M / ? ? ? ? ? ) - b utton (f orward or backward). Note: Y ou will not necessarily find a page for e very page number y ou enter . E.g. y ou hav e entered page no . 116 but it does not off er this page. Av ailab le page numbers can be f ound on the Inde x page (most stations [...]

24 DISC D VD discs must be Region 4 or Region ALL type to play on this unit. The loaded Disc (D VD , A udio-CD and MP3/JPEG-CD) will be recognized automatically . The suitable disc f ormats are: D VD-Video, CD , CD-R/R W and D VD-R/RW (Video f ormat only). Some CD-R/RW discs ma y be incompatib le. Do not play DVD-ROM, DVD-Audio, VCD, CD-G or Photo [...]

25 34:56 71:33 T rack 1 1/99 PREP ARA TION/ST A TUS DISPLA Y OF DISC NOTE: If the unit does not operate properly: Static electricity can adversely aff ect the operation of this pla yer . Sometimes this can be remedied by unplugging the unit for a short time, then reconnecting it. DVD Audio CD To mak e status display disappear , press DISPLA Y again[...]

26 You can change the default settings to customize performance to your preference. SETTING SETUP LANGUAGE 1 Press TV/DVD to select the DVD mode. “No Disc” will appear on the screen. (If a DVD disc has already loaded, the play- back will start automati- cally .) 2 Press SETUP in the stop mode. The SETUP MENU of D VD will appear on the screen. T[...]

27 No Disc Reading PLA YB A CK PR OCEDURE 6 On the TV -screen, “No Disc” changes to “Reading” and then pla yback commences. • A menu screen will appear on the TV screen, if the disc has a menu f eature. 1 Press TV/DVD to select DVD mode. 2 3 Press / or / to make a selection. 4 Press ENTER . • Title is selected and pla y commences . 5 Pr[...]

28 SPECIAL PLA YB A CK Press F.FWD during normal playback. Each press of the F.FWD button will increase the speed of the search (x 2), (x 4), (x 8), (x 15). (CD: (x 2), (x 4), (x 8), (x 20)) • To resume normal playback, press PLAY . Fast Forward Playback Press REW during normal playback. Each press of the REW button will increase the speed of the[...]

29 MP3/JPEG PLA YB A CK 4 3 6 1 2 5 This player can play back the MP3/JPEG-data which has been recorded on CD-R or CD-RW. To produce the MP3/JPEG-data, you need a Win- dows-PC with CD-R/RW drive and a MP3/JPEG- encoding Software (not supplied). The Apple-HFS-System cannot be played. MP3/JPEG CD information Limitations on MP3/JPEG CD playback • MP[...]

30 4 3 1 2 6 5 About file menu NOTES: • The picture menu is displa y ed when the FUJICOLOR CD or the K odak Picture CD are pla yed. T o display the file menu press TITLE . • MP3 file on the KODAK Picture CD is not recognized on this unit. JPEG CD playback Place a disc on which JPEG files have been recorded in the disc slot. On the TV -screen, ?[...]

31 SETTING THE JPEG INTER V AL 1 2 You can continuously play back all JPEG files automatically. Press SETUP in the stop mode. Press or to select “Picture”, then press ENTER . Press or to select “JPEG Interval”. 3 4 Press or to select your desired time. Off: Plays back one file at a time. 5 Seconds: Plays back images in the form of a slide s[...]

32 SETTING THE SELECT FILES 4 When playing back a CD containing a mix- ture of MP3 and JPEG files, only MP3 or JPEG files can be displayed on the file menu. Press SETUP in the stop mode. Press / to select “Picture”, then press ENTER . Press or to select “Select Files”. Press ENTER or / to select your desired file type. All: Displays all fil[...]

33 NOTES: •Y ou can select the P ause, Slow or Search playback in the zoom mode. • Some discs may not respond to zoom feature. ZOOMING/LOCA TING DESIRED SCENE This unit will allow you to zoom in on the frame image. You can then make selections by switching the position of the frame. In the zoom mode press ZOOM repeatedly to return to a 1:1 view[...]

34 NOTES: Some discs may not work with the repeat operation. In A-B repeat mode, subtitles near point A or B ma y not appear . During the A-B Repeat Playbac k the ANGLE feature will not operate. Y ou ma y not be able to set A-B Re- peat, depending on the scenes of the DVD. REPEA T PLA YB A CK Press PLAY to start Repeat playback. To resume normal pl[...]

35 Marker 2 Marker 1 Marker 3 /Enter/Cancel/Marker Marker 2 Marker 1 Marker 3 /Enter/Cancel/Marker 27 00 54 Marker 2 Marker 1 Marker 3 /Enter/Cancel/Marker 27 16 08 54 25 31 00 01 02 Marker 2 Marker 1 Marker 3 /Enter/Cancel/Marker 27 16 08 54 25 31 00 01 02 MARKING DESIRED SCENES The unit stores the points that you want to watch again. You can resu[...]

36 1/8 Eng Dolby Digital 2/8 F ra Dolb y Digital 1/32 Eng Off Subtitles T urning the Subtitles On and Off When playing back a disc recorded with subtitles, you can turn the subtitles on or off. Press SUBTITLE during play- back until “Off ” appears. Changing the subtitle language Y ou can select the language when playing bac k a disc recorded wi[...]

37 1/9 CHANGING ANGLES/TITLE SELECTION/D VD MENU When playing back a disc recorded with multi-angle facil- ity, you can change the view angle. 1 Press ANGLE during play- back. The current angle will ap- pear . 2 Press ANGLE repeatedly until the desired angle is selected. Changing Angles Two or more titles are recorded on some discs. If the title me[...]

38 1 Press SETUP in the stop mode. Press or to select “Picture”. 2 Press or ENTER , then press or to select “Tv Screen”. 3 Press or ENTER . Press or to select your de- sired screen type, then press ENTER . Y ou hav e the f ollowing screen siz es to choose from: 4:3 Letterbox When playing back a wide screen-DVD disc, it displays the wide pic[...]

39 DYNAMIC RANGE CONTROL 1 Press SETUP in the stop mode or No Disc. Press or to select “Sound”. 2 Press or ENTER to se- lect “DRC”. 3 Press or ENTER , then press or to select de- sired setting, then press ENTER . On : Dynamic range is on. Off : Dynamic range is off . 4 Press SETUP or RETURN to remov e the Menu screen. DRC (Dynamic Range Con[...]

40 PARENT AL CONTR OL SETTING Some discs are specified not suitable for children. Such discs can be limited not to play back with the unit. NOTES: • If each setup (P .26,31,32,38~41,43~45) has been completed, the unit can alwa ys be worked under the same con- ditions (especially with D VD discs). Each setup will be retained in the memory when you[...]

41 TO CHANGE THE P ARENT AL LEVEL NOTE: Do not forget the pass w ord. If you forget the password, you can reset the code as follow: Press and hold the Stop button on the front panel, then press and hold the number 7 button on the remote control at the same time. The On-Screen displa y will show “P ASSWORD CLEAR”. Y ou can now set a new password[...]

42 TEMPORAR Y DISABLING OF RA TING LEVEL BY D VD DISC If you wish to cancel the set r ating lev el tempor arily , select “Parental Control Level” with or , then press ENTER . If the 4-digits pass word at step 3 on page 40 has been set, the pass word entering screen will appear as shown in step 4 belo w . Alternatively , if the pass word has not[...]

43 Menu Subtitle Audio English Automatic English English Francais Espanol Deutsch Italiano Other /Enter/Setup/Return Language Picture Parental Sound Other SETTING MENU LANGUAGE Press or ENTER . Press or to select your desired language, then press ENTER . 1 2 3 Press SETUP or RETURN to remov e the Menu screen. Other: Other languages can be selected [...]

44 Menu Subtitle Audio English Automatic English Francais English Espanol Deutsch Italiano Automatic Other Off /Enter/Setup/Return Language Picture Parental Sound Other Menu Subtitle Audio English Automatic English /Enter/Setup/Return Language Picture Parental Sound Other If you want to select another language, enter the language code (See the Lang[...]

45 Menu Subtitle Audio English Automatic English /Enter/Setup/Return Language Picture Parental Sound Other SETTING A UDIO SOUNDTRA CK LANGU A GE Press or ENTER . Press or to select your desired Audio Language, then press EN- TER . 1 Press SETUP in the stop mode. Press or to select “Language” 2 3 Press SETUP or RETURN to remov e the Menu screen.[...]

46 LANGUAGE CODE LIST Enter the appropriate code number for the initial settings "AUDIO", "SUBTITLE" and/or "MENU LANGUAGE" (see pages 43~45). Abkhazian 1112 Fiji 1620 Lingala 2224 Singhalese 2919 Afar 1111 Finnish 1619 Lithuanian 2230 Slovak 2921 Afrikaans 1116 French 1628 Macedonian 2321 Slovenian 2922 Albanian 2927 [...]

47 BEFORE REQUESTING SER VICE If your unit does not work properly check the following before calling a service engineer. 7 11 CAUSE SYMPTOMS SOLUTION PAGE POWER No power. The Mains lead is not connected. POWER button is OFF. 11 7 8 No picture, no sound. TV BROADCAST RECEPTION Sound OK, poor picture. Picture OK, poor sound. Poor reception. Poor colo[...]

48 GENERAL Power supply: Power consumption: W eight: Dimensions: Operating temperature: Operating humidity: TELEVISION T ype: Display method: Number of Pixels: Viewing angle: T uner type: Receiving channels: Antenna input: Speaker: A udio output power: D VD/CD pla yer Signal system: Applicable disc: Input: Digital audio out: Pickup: A CCESSORIES: A[...]

49[...]

04/10 K ORION ELECTRIC CO ., L TD . (J AP AN)[...]

1 Quick Set-up Sheet for 14LD Antenna and Power Connections Connect as follows. How to install the batteries 1 Open the cover in direction of the arrow and take it off. 2 Install the batter ies as shown below , pay attention to polarities. 3 Replace cov er . Use batter y type UM-4 (AAA-Size) . Antenna socket AC adaptor (supplied)[...]

2 On-screen language selection Press MENU . If you press MENU for the first time, the language setting menu will appear. 2 Press or to select the desired language. Then press ENTER . 3 Press MENU to return to the normal TV screen. 4 Press TV/DVD to select TV mode. 1 Unit turning on Gerät einschalten Unit turning on Press (P ower) on the top of the[...]

3 PICTURE NICAM AUTO OFF AUDIO LANGUAGE AV COLOUR AUTO LANGUAGE ON/OFF TIMER MENU PRESS: ▲ / ▼ / ENTER / MENU CH TUNING Press MENU . Press or to select CH TUNING. Then press ENTER . Channel preset 2 Press or to select AUTO . 3 Then press ENTER . The auto search starts and all channels are stored automatically, in the order that they are found. [...]

4 Depending on the D VD , the start-up sequence will var y . Some D VDs indicate a menu screen. Press / or / to select the menu. Then press ENTER to confir m the selection. Setting Setup language for DVD J5N70307A K Press SETUP until normal TV screen appears. 4 Playback 1 2 3 4 Press TV/DVD to select DVD mode. Place the disc in the disc slot with t[...]