Palsonic PDP4275 manual

PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 107CM CORDLESS REMOTE PLASMA TELEVISION & MONITOR MODEL: PDP4275 OWNER'S MANUAL N111[...]

Table of Contents Important Information .................................................................................................................................................... Important Safety Precautions ....................................................................................................................................[...]

Important Information 1 WARNING: TO REDUCE THE RISK OF OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of insinuated dangerous voltage within the product's enclosure that may be of sufficient magnitude to[...]

Important Safety Precautions 2 Electrical energy can perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order to prevent po[...]

Important Safety Precautions 3 13. Carefully move ---When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Sudden stops, excessive force and uneven floor surfaces can cause the product to fall from the trolley. 15. Servicing ---Refer all servicing to qualified service personnel. Servicing is requ[...]

Important Safety Precautions 4 22. Power source ---This product is intended to be supplied by a listed power supply indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For added protection for this product during a lightning storm, or when it is left unatt[...]

Preparations 5 Using the Remote Control Use the remote control by pointing' it towards the remote sensor window of the set. Objects between the remote control and sensor window may prevent proper operation. Note: This illustration is for reference only. The remote sensor may be in different locations on different models. Cautions regarding use[...]

Preparations 6 AC-INPUT AC cord Plug into AC outlet Household power outlet Antenna Connection INSTALL the unit in a room where direct light will not fall upon the screen. Total darkness or a reflection on the picture screen may cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing. Optimum reception of colour requires a[...]

Identification of Controls 7 Main Unit 1. 2. 3. 4. 5. 6. 7. REMOTE SENSOR INDICATOR POWER SWITCH SOURCE To select the input signal source. MENU Press this button to access the MENU main page. VOL Press the VOL or VOL button to directly increase or decrease the sound volume level; In OSD MENU, press these buttons to adjust the value or setting of ea[...]

Identification of Controls 8 Main Unit 1 2 3 4 5 6 9 10 RS232 control interface For service only. The user cannot operate the unit through the RS232 terminals. HDMI input To connect with those equipments with HDMI interface, for example, Set-top box or DVD player. D-Sub interface/Audio in Connect with those equipments with D-Sub interface, for exam[...]

Identification of Controls 9 Remote Control 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. Descriptions for the button functions POWER Turn the unit on or off 0-9 Buttons Direct channel select button To select channel digit. button To quickly jump between current channel and last selected channel. S-SYS To set sound system C[...]

Connections 10 Cautions Before Connecting Carefully check the terminals for position and type before making any connections. The illustration of the external equipment may be different depending on your model. Loose connectors can result in image or colour problems. Make sure that all connectors are securely inserted into their terminals. Refer to [...]

Connections 11 Connect AV2 Input Terminals Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the unit and the video camera. To view the program from the AV2 input terminals, please select AV2 in the INPUT SELECT menu after proper connection. Video camera To video input To video output To audio inputs To audio outputs Yellow (vid[...]

Connections 12 Connect AV Output Terminals Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the unit and VCR. To record the desired program, please select a program you wish to record firstly, then turn on your VCR, insert videotape for recording and press the Record button to begin recording. Note: The AV output terminals outp[...]

Connections 13 Connect Component Input Terminals Connect the component video cable between the component input jacks on the unit and component output jacks on the video player, for example, DVD player or Set-top box. Connect the Audio cable between the audio input jacks on the unit and audio output jacks on the video player. To view the program fro[...]

Connections 14 Video equipment with HDMI interface Connect the HDMI cable between the HDMI interface on the unit and the HDMI output interface on the video equipment. To view the program from the HDMI interface, please select HDMI in the INPUT SELECT menu after proper connection. Note: The HDMI Sources are compatible with DVI displays through the u[...]

Connections 15 D-SUB cable Audio cable Connect the D-SUB Interface Connect the D-SUB cable between the D-SUB interface on the unit and the D-SUB output interface on the video equipment or PC. Connect the Audio cable between the audio input jacks on the unit and audio output jacks on the video player or PC. To view the program from the D-SUB interfa[...]

Basic Operations 16 Turning the Unit On and Off Turning On Insert the power cord into the wall outlet. Press the power switch to power on. If the unit is in STANDBY mode, please press the POWER button to turn on the unit. Turning Off With the power on, press the Power button to turn off. If you would like to cut off the power completely, press the [...]

Basic Operations 17 Changing Channels Using the Channel Buttons (CH+ or CH-) Press the CH+ or CH- to change channels. When you press the CH+ or CH- , the unit changes channels in sequence. You will see all the channels that the unit has memorised. You will not see channels that were erased. Direct Accessing Channels Press the number buttons to go d[...]

Memorising the Channels 18 Your PDP TV can memorise and store all the available channels. After the available channels are memorised, use CH+/- to scan the channels. Storing Channels in Memory Automatically Press MENU to display the menu main page. Press repeatedly to select CHANNEL item. Press ENTER or to access the submenu. Press repeatedly to se[...]

Memorising the Channels 19 Manual Fine Tuning Press MENU to display the menu main page. Press repeatedly to select CHANNEL item. Press ENTER or to access the submenu. Press repeatedly to select Fine Tune item. Press to fine tune till the best possible picture and sound are obtained. If you fine tune a program manually, the AFC will be turned off au[...]

Editing Channels 20 Editing Channel Number You may use this function to arrange the channel order as your will. Press MENU to display the menu main page. Press repeatedly to select CHANNEL item. Press ENTER or to access the submenu. Press to select Channel Edit item. If the Channel Edit is highlighted automatically, this step can be skipped . Press[...]

Setting Picture 21 Setting Picture Press MENU to display the menu main page. Press repeatedly to select PICTURE item. Press ENTER or to access the submenu. Press to select menu item that you would like to adjust. Press to adjust the value of the selected item. As an example, the right illustration is the PICTURE menu page in TV mode. Customising Co[...]

Setting Sound 22 Setting Sound Press MENU to display the menu main page. Press repeatedly to select SOUND item. Press ENTER or to access the submenu. Press to select menu item that you would like to adjust. Press to adjust the value of the selected item. Volume Balance Treble Bass Sound Mode Surround Descriptions Press to adjust the volume. Press t[...]

Setting System 23 Screen Saver Setting System Press MENU to display the menu main page. Press repeatedly to select SETTING item. Press ENTER or to access the submenu. Press to select menu item that you would like to adjust. Refer to chapter [Setting On-Screen Display]. TIME setting 3D Comb Filter Item Refer to chapter [Setting Time]. Press to turn [...]

Setting System 24 Setting Time Press MENU to display the menu main page. Press repeatedly to select SETTING item. Press ENTER or to access the submenu. Press to select TIME Setting item. Press ENTER or to access the time setting sub page. Press to select item to adjust. Note: If you have set the timer of Auto Power On, once you perform turn-on oper[...]

Setting Window 25 Setting Window Press MENU to display the menu main page. Press repeatedly to select WINDOW item. Press ENTER or to access the submenu. Press to select menu item that you would like to adjust. Press to adjust the value of the selected item. As an example, the right illustration is the WINDOW menu page in TV mode. Item Descriptions [...]

Troubleshooting 26 Before calling for repair service, check the following items for possible remedies to an encountered symptom. Symptoms No power Check item "Ghost" or double images Check that the AC power cord is plugged into the mains socket. Unplug the power cord, wait for 60 seconds. Then reinsert plug into the mains socket and turn [...]

Care and Maintenance 27 Do not use in hot or cold rooms (locations) When the unit is used in rooms (locations) with low temperature, the picture may leave trails or appear slightly delayed. T his is not a malfunction, and the unit will recover when the temperature returns to normal. Do not leave the unit in a hot or cold location. Also, do not leav[...]

Specifications 28 Power supply: Power Consumption: Screen: Weight: Dimensions AC 100-240V 50/60Hz 300W 107cm 30 kg (without Stand) 1050(W) x 718(H) x 270(D)mm TV system & channel coverage: System PAL-D/K PAL-B/G PAL-I NTSC-M SECAM-B/G SECAM-D/K VHF 1-12 2-12 2-12 2-13 2-12 1-12 UHF 13-57 21-69 21-69 14-69 21-69 21-69 CATV Z1-Z37 X-Z+2, S1-S41 A[...]

PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 604-PS42T83-02 Ver. 1.0[...]