Palsonic TFTV-151 manual

Palsonic Corporation Pty Ltd 1 Joynton Avenue WATERLOO NSW 201 7 AUSTRALIA Tel 61 2 93137111 Fax 61 293137555 www.palsonic.com.au Customer Service - 1300 657 888 TFTV-151 OWNER'S MANUAL 15.1" TFT LCD Monitor TV[...]

Contents Safety Instructions ................................................................... General safety precautions ..................................................... Parts Description Front Panel .......................................................................... Rear Panel ........................................................[...]

Before connecting the AC power cord to the DC adapter outlet, make sure the voltage designation of the DC adapter corresponds to the local electrical supply. Never insert anything metallic into the cabinet openings of the Liquid Crystal Display (LCD) monitor: doing so may create the danger of electric shock. To avoid electric shock, never touch the[...]

General safety precautions This Monitor has been engineered and manufactured to assure your safety. You can prevent serious electrical shock and other hazards by keeping in mind the following: Do not place anything heavy, wet or magnetic on the monitor or the power cord. Never cover the ventilation openings with any material and never touch them wi[...]

DC power Supply/Adapter Parts Description Front Panel 1. SPEAKER 2. POWER switches the set off (stand-by mode) and on. 3. MENU display the main on-screen menu. Exit from sub-menu. 4. SELECT select input signal or select submenu of the on-screen menus. 5. Volume UP, Volume DOWN adjust the volume. Also adjust the value of a menu option. 6. CH UP, CH [...]

Parts Description Rear Panel 1. AUDIO OUTPUT connects to the audio input port of an additional device. 2. VIDEO OUTPUT 3. AUDIO INPUT audio signals from VCR or similar device. 4. VIDEO INPUT video signals from VCR or similar device. 5. S-VIDEO IN S-Video signal from an S-VHS VCR or laser disc player. 6. HEAD PHONE JACK 7. SCART (PAL System) SCART a[...]

7 Remote Control Unit[...]

3 1 Inserting the Batteries in the Remote Controller You must insert or replace the batteries in the remote controller when you: Purchase the set. Find that the remote controller is no longer operating correctly. Remove the cover of the remote controller by pressing the symbol and pulling the cover space in the direction of the arrow. 2 Insert 2 ba[...]

Menu Tree 9 Main Menu (TV/VIDEO mode) (PC mode) (TV/VIDEO mode) (TV/VIDEO mode, NTSC System) (PAL System) (NTSC System) (Not available) (TV mode, NTSC System) AIR/CATV TRACKING INFORMATION TUNING FUNCTION FUNCTION TRACKING INFORMATION TUNING LANGUAGE SPORT AUTO TUNING MANUAL TUNING FINE TUNING CH SKIP (Not available) (Not available) (PAL System) (T[...]

Connecting a PC Turn off your computer and monitor. Connect a PC D-Sub cable between your PC and PC-VIDEO-IN of the monitor. And then fasten the screws of both sides of the cable. Connect a PC Audio Cable between the Sound Output jack of the sound card on a PC and the PC-AUDIO-IN of the monitor. Connect a DC Power unit cable to the Power jack on th[...]

Viewing a PC screen Initial set PC mode When the picture is unstable Power on your monitor by pressing the POWER button on the main set or on the remote controller. Use the PC button on the remote controller to switch to the PC mode. Then the PC screen is automatically set. When a CD-Title runs, the music is output from speakers. (You can use an ex[...]

Adjusting the Picture Settings Viewing a PC screen Your monitor has several settings which allow you to control picture quality: CONTRAST, BRIGHTNESS, COLOUR TEMPERATURE Press the MENU button. Result : The PICTURE menu is displayed. Use the CH or CH buttons to select one of the following options: CONTRAST BRIGHTNESS COLOUR TEMPERATURE Press the SEL[...]

Viewing a PC screen Adjusting the Sound Settings The sound settings can be adjusted to suit your personal preference: TREBLE, BASS, BALANCE, S.MODE Press the MENU button. Result: The PICTURE menu is displayed. Use the VOL or VOL buttons to move the SOUND menu. Use the CH or CH buttons to select one of the following options: TREBLE BASS BALANCE S.MO[...]

Viewing a PC screen Adjusting the Geometry Settings The geometry settings can be adjusted to centre your viewing screen. Press the MENU button. Result : The PICTURE menu is displayed. Use the VOL , VOL buttons to move the GEOMETRY menu. Use the CH or CH buttons to select one of the following options: H-POSITION V-POSITION AUTO POSITION Press the SE[...]

Viewing a PC screen PC Stable Adjustment When the screen is unstable in PC settings, or to make your PC stable by adjusting the Clock and Phase, set the PC in the following sequence: Press the MENU button. Result : The PICTURE menu is displayed. Use the VOL , VOL buttons to move the FUNCTION menu. Use the CH button move to TRACKING and then press t[...]

Connecting to watch TV or VCR Connecting the Aerial or Cable Television Network To view television channels correctly, a signal must be received by the set from one of following sources: An outdoor aerial An indoor aerial (not recommendable) A cable television network 1. In the first three cases, connect the aerial or network input cable to the 75 [...]

Viewing a TV/VCR screen Adjusting the Picture Settings 1 Your TV have several settings which allow you to control picture quality: CONTRAST, BRIGHTNESS, SHARPNESS, COLOUR, TINT Press the MENU button. Result: The PICTURE menu is displayed. Use the CH or CH buttons to select one of the following options: CONTRAST BRIGHTNESS SHARPNESS COLOUR TINT (NTS[...]

Adjusting the Picture Settings 2 By pressing the P.STD button on the remote control, you can sequentially select any one of the four possible preferred analogue picture presets. Whenever this button is pressed, the mode will be changed as follows. CUSTOM STANDARD STRONG MOVIE SOFT CUSTOM Select this mode to view the adjusted picture you want. STAND[...]

Type of broadcast Viewing a TV/VCR screen Adjusting the Sound Settings 1 The sound settings can be adjusted to suit your personal preference: TREBLE, BASS, BALANCE, S.MODE / MTS Press the MENU button. Result: The PICTURE menu is displayed. Use the VOL , VOL buttons to move the SOUND menu. Use the CH or CH buttons to select one of the following opti[...]

Adjusting the Sound Settings 2 By pressing the S.STD button on the remote control, You may get more best sound and change the sound of a suit with a video source. Whenever this button is pressed, the mode will be changed as follows. CUSTOM STANDARD MUSIC MOVIE SPEECH CUSTOM Select this mode to listen the adjusted sound you want. STANDARD Select thi[...]

Channel Memory (PAL System) Storing the Channels Automatically You can scan the frequency ranges available on your television in your country and store all the channels found automatically. The channels are stored in the order in which they appear in the frequency bands. It is possible that the automatically allocated numbers may not correspond to [...]

PAL SECAM AUTO BG DK I L Channel Memory (PAL System) Storing the Channel Manually When storing channels manually, you can choose: whether or not store each of the channels found. The number by which you wish to identify each stored channel. Press the MENU button. Result: The picture menu is displayed. Use the VOL or VOL buttons to move the FUNCTION[...]

Channel Memory (PAL System) To assign a program number to the channel, press the VOL or VOL button until you find the correct number. Press the CH button to move the SEARCH . Press the VOL or VOL button to start the search. When the screen is fine tuned, press the CH button to move the STORE . Press the VOL or VOL button, the channel will automatic[...]

Channel Memory (PAL System) Fine Tuning Channel Reception If the reception is clear, you do not fine-tune the channel, as this is done automatically during the search and store operation. If however the signal is weak or distorted, you may have to fine-tune the channel manually. Press the MENU button. Result: The PICTURE menu is displayed. Use the [...]

Channel Memory (PAL System) Skipping Unwanted Channels You can exclude the channels of your choice from the channel scan operation. When you scan through the stored channels, those you have chosen to skip are not displayed. Press the MENU button. Use the VOL or VOL buttons to move the FUNCTION menu. Press the CH or CH button to select the TUNING op[...]

Other Functions SLEEP You don’t have to remember to switch the set turn off before you go to sleep. The sleep timer automatically switches the set to stand-by after the preset time elapses. For selecting you desired number of minutes, press the SLEEP button several times or Continuously. OFF will appear on the screen, followed by 10, 20, 30, 60, [...]

APPENDIX B: Troubleshooting If you have a problem setting up or using your LCD monitor, you may be able to solve it yourself. Before contacting customer service, try the suggested actions that are appropriate to your problem. What you see... Screen is blank and power indicator is off "CHECK CABLE OR SIGNAL" message “INVALID MODE" m[...]

APPENDIX B: Troubleshooting Ensure that the audio cable is firmly connected to both the audio-in jack on your monitor and the audio-out jack on your sound card. Problem Connecting a PC, TV or VCR, page 13, 19. No sound Check AIR/CATV is correctly selected on screen display menu. (NTSC Model) Sound level is too low Selecting Broadcast Source, page 2[...]

TV Signal VHF Low EU (Except France), Australia PAL/SECAM, NTSC E2Ch(48.25MHz)~ S10Ch(168.25MHz) 1Ch(91.25MHz)~ C22Ch(165.25MHz) 13Ch(471.25MHz)~ 62Ch(765.25MHz) E21Ch(471.25MHz)~ E69Ch(885.25MHz) Tuning Range Regulation EMI 3W (PMPO) x 2EA Other APPENDIX C: Specification Input / Output Video input PC Analog RGB A/V, S-Video, SCART A/V, S-Video Aud[...]

APPENDIX D: Display Modes If the signal from the system equals to the standard signal mode, the screen is adjusted automatically. If the signal from the system doesn’t equal to the standard signal mode, adjust the mode with referring to the Video card user guide because the screen might not display or only the power LED might be on. For the displ[...]

KQFIT201Z7 PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL:(02)9313 7111 FAX:(02)9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888[...]