Palsonic TFTV2030D manual

LCD TV COMBO TFTV2030D USER'S MANUAL[...]

Table Of Contents Important Safety Instructions -------------------------------------------------------- Characteristic Features -------------------------------------------------------- Disc Information --------------------------------------------------------------------------- Front View ------------------------------------------------------------[...]

Important Safety Instructions 1 The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “Dangerous Voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equila[...]

Important Safety Instructions 2 Note: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any ventilation openings. Maintain well ventilated conditions around the produc[...]

Characteristic Features 3 This product incorporates a DVD player, LCD display and TV receiver in one system. Multiple Modes DVD mode TV mode AV1 mode AV2 mode S-VIDEO mode COMPONENT mode VGA mode High Quality Property High Resolution Adopt an MPEG2 decoding format to achieve horizontal resolution more than 500 lines. Superior Sound Built-in Dolby D[...]

Disc Information 4 Discs Formats Supported By This Player DISC LOGO CONTENTS SIZE MAXIMUM TIME 133min(SS-SL) 242min(SS-DL) 266min(DS-SL) DVD Audio+Video (active picture) 12cm 484min(DS-DL) CD Audio 12cm 74min JPEG Still high resolution 12cm The operating method of some DVD discs is specified by the software maker. Please refer to the instruction ma[...]

Front Panel 5 Front View 1. 2. 3. 4. 5. 6. 7. CARD button Press to enter SD or MS card mode in the DVD mode. Previous Skip button Press once to skip to the beginning of the current chapter/track. Press twice repeatedly to skip to the previous chapter/track for some discs under DVD mode. Next Skip button Press to skip to the next chapter/track for s[...]

Front Panel 6 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. Disc Tray Slot Used to load disc. SOURCE/ENTER button Press to select the modes: DVD, TV, AV1, AV2, S-VIDEO, Component, VGA. Press to confirm selection or exit the setup menu in the setup menu. MENU button Press to enter or exit setup menu. CH / button In TV mode, press to select channels. In setu[...]

Rear Panel 7 Rear View 1. 2. 3. 4. 5. 6. VGA Input Jack Connected to the VGA output jack on a personal computer. Antenna Input Jack Connected to external antenna to receive the TV program in TV mode. Video Input Jack In AV1 mode, connecting for the external video signal input. L/R Audio Input Jack Connected to the L/R audio signal input in AV1 mode[...]

Remote Control 8 Remote Control Drawing 1. 2. 3. 4. 5. POWER button Press to enter or exit the standby mode. TV button Press to enter TV mode. DVD button Press to enter DVD mode. P.M. button Press to select picture mode. S.M. button Press to select audio mode. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 0-9 Number buttons Press to select number[...]

Remote Control 9 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. MENU button (in DVD) Press to access the disc menu in DVD mode. Under teletext mode, press to enter or exit mixed mode. SETUP button Press to enter DVD setup menu. Under Teletext mode, press to display the index page. SLOW button Press to activate slow playback under DVD mode.[...]

Remote Control 10 40. GOTO button Press to access or exit from the search menu under DVD mode. Under teletext mode, press to display real clock, press the EXIT button to exit. Preparation of Remote Control Softly push the back cover to open the battery compartment. Insert two batteries 1.5V, size AAA), please make sure the polarity matches the mark[...]

System Connections 11 Do not connect the power cord until all other connections have been made. Ensure that you observe the colour cord when connecting audio and video cables. Connecting To External AV Signal Source (AV1) Use the audio and video cable to connect the input jacks on the rear panel of the unit to the external AV signal source. After c[...]

System Connections 12 Connecting to External AV Signal Source (AV2 and S-VIDEO) Use the audio and video cable to connect the AV2 input jacks on the rear panel of the unit to the external AV signal source. Use the S-VIDEO cable to connect the S-VIDEO input jack on the rear panel of the unit to the external AV signal source. After connection, turn on[...]

System Connections 13 Connecting to External AV Signal Source (Component) Use the audio and video cables to connect the Y/Pb(Cb)/Pr(Cr) input Jacks on the rear panel of the unit to the external AV signal source. After connection, turn on the power of the unit and external AV signal source, press the SOURCE button to shift to component mode. AV SIGN[...]

System Connections 14 Connecting to PC The unit can be connected to PC (person computer) via the VGA cable. Follow the figure below to connect: 1. Connect one end of the VGA cable to the VGA input jack on the rear panel of the unit. 2. Connect the other end to the PC. 3. Connect one end of the audio cable to the PC audio input jack on the rear pane[...]

System Connections 15 This unit can be connected to the TV signal input source via the 75 antenna jack on the rear panel. After connection, turn on the power of the unit, press the SOURCE button to shift to TV mode. TV SIGNAL INPUT Power is supplied through the provided appropriative power adapter, one end is connected to the DC 12V IN jack on the [...]

System Connections 16 This unit can be connected to an earphone for listening music privately. See the below figure for details: After connecting to the earphone, the internal speakers output will turn off automatically. Connecting to Earphones[...]

System Setup and Operation 17 Preparations 1. After connection, press the POWER button to turn on the power. (If it is turned on, the power indicator is blue.) 2. Press the SOURCE button to shift mode. You can go on with the following operations: Image Setting Press the MENU button once to enter the setup menu, as shown on the right: In the setup m[...]

System Setup and Operation 18 Sharpness Setup Press the button to select Sharpness , Press the button to adjust the value, press the MENU button to return to the previous menu. Advanced Setup Press the button to select Advanced , press the ENTER button to confirm and enter the item. In the menu, press the button to select the desired item, press th[...]

System Setup and Operation 19 Listen Mode Setup Press the button to select Listen Mode , press the ENTER button to enter, press the button to select items, press the ENTER button to confirm. Press the MENU button to return to the previous menu. Sound Mode Setup Press the button to select Sound Mode , press the ENTER button to enter, press the butto[...]

System Setup and Operation 20 Auto scan will take a few minutes, when the tuning operation completes the unit will exit and memorise the programs by sequence automatically. During tuning, press the MENU button to exit the auto scan mode. Prog Organiser Press the button to select the Prog Organiser, press the ENTER button to enter the menu as shown [...]

System Setup and Operation 21 Channel Name Press the button to select the Channel Name , press the ENTER button to enter the setup, and then press the button to select the input position, press the button to select character or press the number button to input number, press the ENTER button to confirm input. Press the MENU or EXIT button to exit. S[...]

System Setup and Operation 22 Fine Tune Press the button to select the Fine Tune , press the or button to start fine tuning forward or backward. Press the MENU button to return to the previous menu. Store Press the button to select the Store , press the ENTER button to store the fine tuning effect. Back Press the button to select the Back , press t[...]

DVD Playback Operation 23 Preparation: After connections have been made, turn on the TV and select the relevant video input before playback. Disc Loading Steps: Press the power button on the front panel to turn on the power, the player will search a disc and play it automatically in DVD mode. Handing the disc with its printed side outward verticall[...]

CD Playback Operation 24 Repeat Use the REPEAT button to repeat a chapter, a title or all, and also to cancel repeat. GOTO During DVD disc playback, press the GOTO button on the remote control once, there will be a menu displayed on the screen. You can set or select items for your preference. Use the direction buttons to select items, press the ENT[...]

DVD Playback Operations 25 Stop Press this button once to stop playback and then press PLAY button to resume it. Press the button twice to stop playback completely. Fast Playback Press the fast FWD/REV SCAN button on the remote control to activate fast forward or rewind playback. Repeat During playback, press the REPEAT button repeatedly to repeat [...]

DVD Playback Operations 26 Repeat Press the REPEAT button to repeat a file, folder in sequence. Press it repeatedly to display as follows: Shuffle Random Single Repeat One Repeat All Repeat Off Menu Press the MENU button during playback to return to root folder. Press the PLAY button to resume normal playback. GOTO Press the GOTO button to select d[...]

DVD Playback Operations 27 Repeat During playback, press it repeatedly, and the repeat modes are Folder, Shuffle, Random, Single, Repeat One and Repeat All. Previous and Next During playback, press the or button to select picture. In the menu mode, press to turn to the next or previous page. GOTO During playback, press the GOTO button on the remote[...]

DVD Setup Menu 28 DVD Setup Menu This is the place where you arrange all important settings for the cooperation of the DVD with the TV set and other audio equipment. 1. 2. 3. Remove the disc from the DVD drive and press the 'SETUP' button on the remote control, the settings menu will appear. It includes General Setup, Speaker Setup, Dolby[...]

DVD Setup Menu 29 Downmix Captions You can choose captions on or off on screen during playback. Screen Saver When you enable this function a moving DVD symbol appears on the screen when the unit is stopped or showing a still picture for a moment. This feature saves screen from getting damaged by constant picture. Choose "Off" to disable t[...]

DVD Setup Menu 30 Preference Page - - Preference Page - - Audio Subtitle Disc Menu Parental Password Default English French Spanish Chinese Japanese Korean Russian Thai Eng Off Eng Preferred Audio Language Audio Please select your preferred language to playback DVD movies in general. Sure this selection is subject to the audio material on the parti[...]

Attaching the Speaker 31 Follow the below steps to attach the speaker: 1. 2. 3. Take out the unit, speaker and the fixing implements. Insert the plastic tabs of the speaker into the holes on below rear panel of the unit, and slide it leftward, see the below figure . Fix the speaker with fixing implements, see the below figure .[...]

Troubleshooting 32 SYMPTOM CHECK ITEM The player cannot play. Make sure disc is loaded in. Make sure disc is loaded correctly. Make sure disc is not dirty or warped. Make sure the player’s region code is the same as region code of DVD disc. Make sure water condensation has not occurred. If it occurs, take out disc and leave the player on for at l[...]

Specifications 33 TFT-LCD Resolution 800 x 600 TFT-LCD Screen Size 20.1 inches Power AC100 ～ 240V ， 50/60Hz DC 12V 5A Power Consumption < 60W Dimension without speakers 494mm x 428mm x 220mm （ LXWXD) Weight About 12 Kg DESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE Manufactured under license from Dolby Laboratories. “Dolb[...]

PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888[...]