Palsonic TFTV385 manual

PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 38CM CORDLESS REMOTE LCD TV/MONITOR MODEL: TFTV385 OWNER'S MANUAL N111[...]

Congratulation on your purchase of this LCD TV We recommend that you read this manual thoroughly before use to fully enjoy the many functions and excellent features of this unit. Keep this manual in an easily accessible location for future reference. Note: Screen displays and illustrations in this manual may differ from the actual model. Contents I[...]

Important Safety Cautions 1 When any unusual situation occurs, turn off the power supply at once and remove the plug from the wall outlet. Contact a qualified service department in your local area. Water and moisture - Do not use this product near water - for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or nea[...]

2 When relocating the product placed on a trolley, it must be moved with the utmost care. Sudden stops, excessive force and uneven floor surfaces can cause the product to fall from the trolley. The power cords must be routed properly to prevent people from stepping on them or objects from resting on them. Check the cords at the plugs and product. P[...]

Important Safety Cautions 3 Important Information Regarding use of Video images displays The extended use of a fixed image program material can cause permanent "Shadow Image" on the LCD panel. The background image is viewable on normal programs in the form of stationary fixed images. This type of irreversible LCD panel deterioration can b[...]

Identification of controls 4 1. SOURCE To access the SOURCE select menu 2. MENU Press this button to access the MENU main page. 3. CH +/- Change the TV channel. In OSD Menu, press these buttons to choose the OSD items. 4. VOL +/- Increase or decrease the sound volume level. In OSD Menu, press these buttons to adjust the value or setting of each ite[...]

Identification of controls (continued) 5 1. DC POWER input Connect to the DC output of the Power Adapter 2. VGA input / PC- Audio in. Connect to the VGA/audio output 3.5mm jacks on your PC. 3. HDTV input (Y, Pb, Pr, Audio L, R) Connect to the Y/Pb/Pr (or Y/Cb/Cr) and audio output jacks of a Set-Top Box or DVD player. 4. Headphone 3.5mm jack 5. AV o[...]

Remote Control 6 S.MODE Bass+ Bass - Treb- Treb+ OSD POSITION POWER CH CH VOL VOL + - P .M AUTO.ADJ DSP 0 8 7 4 5 1 2 3 6 9 - / -- MENU C.SYS ZOOM CLK SLP EXIT Power on/standby Mute Volume up/down selector; In the menu operation, adjust the selected item Channel up/down selector. In menu operations, used to select item. Access the menu Exit the men[...]

Preparing the Remote Control 7 Effective range of the remote control Please install the batteries before using the remote control. If the remote control fails to operate the LCD TV functions, replace the batteries in the remote control. 1 Open the battery cover. 2. Insert two size-AAA batteries Replace the cover and slide in reverse until the lock [...]

Installation 8 Install the unit in a room where direct light will not fall upon the screen. Total darkness or a reflection on the picture screen may cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing. Optimum reception of colour requires a good signal and will generally mean that an outdoor aerial must be used. The e[...]

Installation (continued) 9 Power connection Connect to the DC input socket of the back of the product. Be sure to fully insert plug into the connection and confirm it is secure. 1. Connecting the female plug to the AC socket on AC adapter. 2. Connecting the AC adapter to the DC power input of the set. 3. Connecting the male plug to the wall outlet [...]

Installation (continued) 10 Elevation adjustment You can adjust the angle of the LCD TV as follows The elevation can be adjusted from -5 0 to +10 0 average.[...]

Installation (continued) 11 Connecting the Video/Audio equipment 1. Carefully check the terminals for position and type before making any connections. 2. Loose connectors will result in image or colour problems. Make sure that all connectors are securely inserted into their terminals. 3. When connecting an external device, turn off the power to the[...]

Installation (continued) 12 The PC input signal connection Connect the VGA (D-sub) input interface on the TV to the output of PC equipment through Min D-sub 15 pin cable as illustrated. For the audio connection, use an audio cord that matches the audio output terminal on the computer. If you select PC signal, please set the input signal source of L[...]

Installation (continued) 13 AV OUT connection How to connect: Connect the video/audio output terminals on the TV set to the signal input terminals of the VCR equipment or the video/audio input terminals on other TV set through a video/audio cable. Connect the audio output terminals on the TV set to the Audio amplifier through audio cable. How to re[...]

Installation (continued) 14 YPbPr input connection Please connect the YPbPr input terminals on the TV set for better picture quality. And connect the audio outputs with the corresponding audio input terminals on the TV set. If you select YPbPr signal, please set the input signal source of the LCD TV to YPbPr mode. Notes: The Y, Pb, Pr outputs on yo[...]

Basic Operations 15 POWER CH CH VOL VOL + - P .M AUTO.ADJ DSP 0 8 7 4 5 1 2 3 6 9 - / -- MENU C.SYS ZOOM CLK SLP EXIT 1 2 1 2 Connect the power correctly, then the red indicator lights up and the unit is in STANDBY mode. Press the POWER ( ) button on the remote control or on the unit to turn on the TV set. The indicator will turn to yellow. With th[...]

16 Main On-Screen-Display (OSD) introduction TV/AV/S-VIDEO MODE Picture Setting Menu brightness contrast color sharpness tint 50 50 16 32 0 OSD Setting Menu language OSD position OSD background opaque translucent OSD timeout English 30 seconds Signal Information Menu video type: PAL / 50Hz mode: 3 Channel Setting Menu channel number skip manual sea[...]

17 POWER CH CH VOL VOL + - P .M AUTO.ADJ DSP 0 8 7 4 5 1 2 3 6 9 - / -- MENU C.SYS ZOOM CLK SLP EXIT Operations Channel Setting Press CH button repeatedly to highlight manual search item and press VOL+ to enter. If Auto Search can not preset the desired channels, or you want to preset the desired channels one by one with the preferred channel numbe[...]

18 POWER CH CH VOL VOL + - P .M AUTO.ADJ DSP 0 8 7 4 5 1 2 3 6 9 - / -- MENU C.SYS ZOOM CLK SLP EXIT Operations Channel Setting After presetting the channels, you can skip unnecessary channels so that only the channels you want to watch are selected when you press the CH to change channels. Select the channel number which you want to skip using the[...]

19 POWER CH CH VOL VOL + - P .M AUTO.ADJ DSP 0 8 7 4 5 1 2 3 6 9 - / -- MENU C.SYS ZOOM CLK SLP EXIT Operations Channel Setting You can edit the channel programs in your favourite order. Access the Channel Setting menu. Press CH to select channel edit . Press VOL+/- to enter into the sub-menu. Press CH to select current channel , press VOL+/- to se[...]

20 POWER CH CH VOL VOL + - P .M AUTO.ADJ DSP 0 8 7 4 5 1 2 3 6 9 - / -- MENU C.SYS ZOOM CLK SLP EXIT Operations Selecting channel * You can press DSP button to know current channel number information. Using previous channel button Using Channel up/down buttons To select one-digit channel numbers: Input the channel using the 0-9 number button , then[...]

21 POWER CH CH VOL VOL + - P .M AUTO.ADJ DSP 0 8 7 4 5 1 2 3 6 9 - / -- MENU C.SYS ZOOM CLK SLP EXIT Operations Picture adjustment Access Picture Setting menu by pressing MENU button. Press CH to select the item that you want to adjust. Press VOL+/- to adjust selected item. Note: Tint is only for NTSC system. You can select picture mode by P.M butt[...]

S.MODE Bass+ Bass - Treb- Treb+ OSD POSITION POWER CH CH VOL VOL + - P .M AUTO.ADJ DSP 0 8 7 4 5 1 2 3 6 9 - / -- MENU C.SYS ZOOM CLK SLP EXIT 22 Operations Audio Setting You can directly press Bass+/- Treb+/- button on the remote control to adjust bass and treble. The SRS symbol are trademark of SRS Labs, Inc. SRS technology is incorporated under [...]

23 POWER CH CH VOL VOL + - P .M AUTO.ADJ DSP 0 8 7 4 5 1 2 3 6 9 - / -- MENU C.SYS ZOOM CLK SLP EXIT Operations System Setting Access the System Setting menu. Press CH to select the item that you want to adjust. Press VOL+/- to adjust selected item. Note: Only when the Blue Screen is On, the set will turn off automatically after 15 minutes if there[...]

S.MODE Bass+ Bass - Treb- Treb+ OSD POSITION POWER CH CH VOL VOL + - P .M AUTO.ADJ DSP 0 8 7 4 5 1 2 3 6 9 - / -- MENU C.SYS ZOOM CLK SLP EXIT 24 Operations OSD Setting Access the OSD Setting menu. Press CH to select the language item. 3 Press VOL+/- to select an OSD language. If select English, then the OSD is displayed in English. Access the OSD [...]

25 POWER CH CH VOL VOL + - P .M AUTO.ADJ DSP 0 8 7 4 5 1 2 3 6 9 - / -- MENU C.SYS ZOOM CLK SLP EXIT Operations Timer Setting Press SLP button to display sleep time menu bar. Press CH or VOL+/- repeatedly to set sleep time between: 0, 10, 20, 30, 60, 90, 120, 180, 240 minutes. If you select 0 minute, the sleep timer function is turned off. Press th[...]

Operations in RGB/YPbPr mode 26 POWER CH CH VOL VOL + - P .M AUTO.ADJ DSP 0 8 7 4 5 1 2 3 6 9 - / -- MENU C.SYS ZOOM CLK SLP EXIT Press the SOURCE button on the unit or button on the remote control. The screen displays the menu shown as right. Press CH to highlight the RGB or YPbPr item. Press VOL+/- or wait about 4 seconds and the signal source is[...]

27 POWER CH CH VOL VOL + - P .M AUTO.ADJ DSP 0 8 7 4 5 1 2 3 6 9 - / -- MENU C.SYS ZOOM CLK SLP EXIT Operations in RGB/YPbPr mode (continued) Picture Settings 5 Access the Picture Setting menu. Press CH to select brightness or contrast item. Press VOL+/- to adjust the selected item. Access the Picture Setting menu. brightness contrast Press CH to s[...]

Troubleshooting 28 Before calling for service personnel, please check the following chart for a possible cause to the trouble you are experiencing. Note: If your problem is not solved, restart your TV by turning it off and then on again once. Never attempt to repair a defective TV yourself. Symptoms No power Check item Ghost or double images Check [...]

Specification Power Supply for AC adaptor: Power Consumption: Resolution: Pixel Pitch: Brightness: Contrast: Viewing angle: Dimensions (mm): Weight (kg): Screen: TV system & channel coverage. SYSTEM PAL-B/G Colour system: Sound output: Accessories ~ 100-240V 50/60Hz 48W 1280 x 768 0.297mm x 0.297mm 500 nit 500:1 120 0 /100 0 470(W) x 180(D) x 3[...]

PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 604-L15H33-01 Ver1.0[...]