Panasonic AG 527DVDE manual

LSQT0620A TV / DVD / VCR Combination Operating Instructions Model N o . A G-527D VDE • Initial Setup and Connection Procedures are on pages 11 to 17. Initial Setup TV Operation Basic Operation Timer Operation For Your Information Advanced Operation As an ENERGY STAR Partner, Matsushita Electric Corporation of America has determined that this prod[...]

Impor tant Saf eguards and Precautions 2 INST ALLA TION 1 PO WER SOURCE CA UTION Operate only from power source indicated on unit or in this manual. If uncertain, have your Electric Utility Service Company or Video Products Dealer verify your home power source. 2 PO WER CORD PLUG For saf ety , this unit has a polar ized type plug (one wide blade), [...]

3 CA UTION: UNIT IS A CLASS I LASER PR ODUCT . HO WEVER THIS UNIT USES A VISIBLE LASER BEAM WHICH COULD CA USE HAZARDOUS RADIA TION EXPOSURE IF DIRECTED . BE SURE T O OPERA TE THE UNIT CORRECTL Y AS INSTR UCTED . WHEN THIS UNIT IS PLUGGED TO THE W ALL OUTLET , DO NOT PLA CE Y OUR EYES CLOSE T O THE OPENING OF THE DISC TRA Y AND O THER OPENINGS TO L[...]

4 Before Using Congratulations on your purchase of one of the most sophisticated and reliable products on the market today. Used properly, it will bring you and your family years of enjoyment. Please fill in the information below. The serial number is on the tag located on the back of your unit. Date of Purchase Dealer Purchased From Dealer Address[...]

5 T ab le of Contents Initial Setup Important Safeguards and Precautions / Safety Precautions ........ 2 - 3 Before Using ........................................................................................ 4 Information (Unit, Cassette, Disc) .................................................. 6 - 7 Location of Controls ........................[...]

6 Information (Unit, Cassette, Disc) V I DE O HEADS M AY NEED C LEA N I N G P L EASE I NSERT HEAD C LEA N I N G CASSETTE OR REFER T O M A NU AL END : P L AY Playing older or damaged tapes may eventually cause video heads to become clogged. Head Clog Sensor Display Picture T ube: 27 inch measured diagonal 100 ° deflection Picture T ube VCR Video Re[...]

7 Initial Setup Definition of T erms Angle Some DVD discs feature scenes simultaneously shot from different angles . The ANGLE button can be used to view the scene from diff erent angles. (ANGLE Indicator lights up on the unit when a scene recorded at different angles is detected.) Chapter Number Titles are subdivided into numbered sections. Y ou c[...]

8 Location of Contr ols Remote Control Buttons SKIP STILL/PA U S E MENU Displays DVD menu. screen. In Stop mode, goes to the counter 3 minutes of tape. “0:00:00”. In Play mode, skips ov er 1 to DV D Sets to D VD mode. LIGHT See next page. DSS/CABLE Sets the remote to control some basic DDS or Cable bo x functions. FM Receives FM radio signal. V[...]

9 Universal Light T ower ® Illuminated Remote Contr ol LIGHT button: When LIGHT is pressed, (D VD , , DSS/CABLE, CH UP/DOWN, V OL UP/DOWN) buttons will light for 5 seconds for easy button location. If no button is pressed in 5 seconds, the light goes out to conserve the batteries. EJECT/OPEN/CLOSE button: When this button is pressed in TV -VCR mod[...]

10 Location of Contr ols (continued) PHONES Connect an earphone or headphones. AUDIO/VIDEO IN Connector Connect from other component. POWER (See page 8.) STOP (See page 8.) PLAY (See page 8.) OPEN/CLOSE (See page 8.) REWIND/SEARCH (See page 8.) SKIP (See page 8.) SKIP (See page 8.) Built-In SpeakerX2 CHANNEL UP/DOWN (See page 8.) TRACKING UP/DOWN ([...]

11 Rear View of the unit Initial Setup Connections For ANT ./Cab le Connect the cable fro m Antenna/Cable to the VHF/UHF terminal on the unit. For DSS/Cable Bo x Connect the OUT jac k on your cable bo x to the VHF/UHF terminal on the unit with a RF cabl e. WARNING Overtightening “Nut type” RF coaxial cables may damage jacks. Finger tighten only[...]

12 Connections (continued) Amplifier Unit Speaker Speaker AUDIO OUT R L R L AUDIO IN Notes on audio output from the optical digital audio output connector Enjoying digital audio output from the digital audio output connector *1 The type of audio output from the connector can be selected by the Settings for DVD Operation. (See page 59.) *2 Sound hav[...]

13 Initial Setup ■ Unit ➛ ➛ ➛ ➛ ➛ Dolb y Digital Decoder ➛ ➛ ➛ ➛ ➛ Amplifier ➛ ➛ ➛ ➛ ➛ Speaker or Unit ➛ ➛ ➛ ➛ ➛ dts (digital theater systems) Decoder ➛ ➛ ➛ ➛ ➛ Amplifier ➛ ➛ ➛ ➛ ➛ Speaker When D VDs recorded in Dolby Digital or dts are pla yed, Dolb y Digital bitstream or dts bitstream [...]

14 Plug the unit power cord into an AC wall outlet. Initial Setup (Ready to Pla y) 1 3 Press on the remote for TV-VCR mode. 2 • If you use a cable box, turn it on and set it to the Public Broadcasting Service (PBS) channel in your time zone. If you use a DSS receiver, it must be turned off. ACTION TV-VCR SELECT SET POWER Initial Setup (Ready to P[...]

15 Initial Setup * Important: I f a remote control button does not work when pressed, press the button on the remote and try the button again. Manual Clock Set If AUTO CLOCK SET was incomplete, manually set the clock as follows. Press ACTION on the Remote to display SET CLOCK Menu screen. 1 SET : SET SE L E C T : END : ACT I O N SET C L OC K DST : [...]

16 Reset Language, Channels, Clock, 3) Press to select “MANUAL,” then press SET . (For Auto Clock Set, select “AUTO CLOCK SET,” and press SET .) 3) Press to select “ANTENNA,” then press SET to set your antenna system (“TV” or “CABLE”). 4) Press to select “AUTO SET,” then press SET . • After Channel Auto Set is finished, Cl[...]

17 Initial Setup 4) Press and press SET to select and set the month, date, year, time, and DST (Daylight Saving Time) . To Make Corrections, repeatedly press to move to error, then correct. 5) Press ACTION twice to start the clock and exit this mode. 3) Press to select “TIME ZONE ADJUST” and press or to subtract or add hour(s) as necessary. 4) [...]

18 Operation using unit buttons Recor d On a T ape Pla yback a T ape 1 Insert a tape. Press PLAY* to play a tape. 2 • The unit power comes on automatically. To prevent tape jam, remove loose or peeling labels from tapes. ■ Forward/Reverse scene search ➛ ➛ ➛ ➛ ➛ Press FF/SLOW+ or REW/SLOW- . ➛ ➛ ➛ ➛ ➛ Press again or PLAY to r[...]

19 Basic Operation Copy Y our T apes (Dubbing) • Unauthorized exchanging and/or copying of copyrighted recordings may be copyright infringement. • Please note that some tapes cannot be dubbed on this unit. Also, it is not possible to dub DVD/Video CD/CD to VHS tape using this unit. Playback (Source) 1 Recording (Editing) unit Insert pre- record[...]

20 4 Press or number key(s) (see below) to select title and press SET to play. Basic DVD Operation Ready Checklist All connections are made. (See pages 11-13.) Your unit is plugged in. If unit is connected to an audio amplifier, turn the stereo system’s power on. 1 Press POWER * on the remote or unit. Insert a disc. • If a disc is already inser[...]

21 Basic Operation • Please read the disc jacket for operation information. • If a single sided disc is placed in upside down, “PLEASE CHECK THE DISC, AND FOR STAINS OR SCRATCHES ON DISC” is displayed. • Remove disc and press unit POWER off when not in use. • Disc continues to rotate with menu displayed even after play is done. Press ST[...]

22 TV Operation 1 Press POWER* on the remote or unit. ■ Using the 100 key When selecting CABLE channels 100 to 125 with the number keys, first press the 100 key, and then enter the remaining two digits. ■ Rapid Tune Press R-TUNE to display the last channel you were watching. ■ Audio Mute Press MUTE to instantly mute the sound. Press again to [...]

23 TV Operation Receivable Broadcast Types The following are possible audio broadcast types and on-screen displays. The signal being received is indicated with an “ ” mark while the selected audio mode is indicated with an arrow. To change the audio mode for these broadcasts, see the “Select Audio Mode for TV Viewing” section (below.) Press[...]

24 Closed Caption Mode Feature 1 Closed Caption System Closed Caption is ... This multi-use system not only allows the hearing impaired to enjoy selected programs, but also makes useful information from TV stations available to everyone. Press ACTION* to display MAIN MENU. 5 Press ACTION three times to return to the normal screen. 2 1) Press to sel[...]

25 TV Operation 1 Caption On Mute Feature Closed Caption narration, if available, is displayed when MUTE button is pressed for silence. Press ACTION to display MAIN MENU. • When a disc supporting closed caption is used, the subtitle and the closed caption may overlap. In this case, turn the subtitle or caption on mute mode off. (See page 48.) 2 1[...]

26 1 ON-TIMER with Alarm TV Timer Features Ready Checklist The clock is set to correct time. This unit can be set to automatically power on in one of 4 modes (TV, VCR Playback, FM radio, or DVD/Video CD/CD.) You can also combine the On-Timer with a one minute alarm that gradually increases in volume. If no button on the remote or unit (including a [...]

27 TV Operation On-Screen Display (OSD) Blue Screen Display When a function button is pressed (PLAY, FF, etc.) or you change channels, the unit mode or channel number will be displayed. (Some station names may also appear if Channel Caption is set. Se e page 38 .) 0 8 A BC Channel & Function Display PLAY Whenever a blank section of a tape comes[...]

28 FM Radio 2 Press a number key * (1~9) to select the FM preset number. 1 To Make Corrections, select station with a number key, then do step 3 again. To exit FM mode, press or DVD on the remote. 1) Press CH to select the desired radio station. (Each press changes frequency by 200 KHz.) 2) Press ADD/DLT to set the radio station. Hold down CH or fo[...]

29 TV Operation 3 4 ■ ■ ■ ■ ■ For cable TV users ➛ “INT” ■ ■ ■ ■ ■ For antenna users ➛ “EXT” 2 1 To exit FM mode, press or DVD on the remote. Press a number key (1~9) to select a preset FM number (see FM Radio Setup on page 28). Using FM Radio F M 1 87. 5 M Hz 1 2 : 0 0 P M Press ACTION twice to end setup. Press FM o[...]

30 Press PROG to end the program. To Enter More Programs, press to select and SET to set a blank program number, and then repeat step 3. Press PROG twice to exit this mode. • If you’re using a cable box, make sure that it is tuned to the desired channel and the power is left on for timer recording. • PROG TIMER Indicator lights up on the unit[...]

31 Timer Operation Repeat steps 1 and 2 on page 30. 1 Press PROG twice to exit this mode. 2 3 To Replace program... To Clear program... 4 Press to select the desired program. 1) Press SET to display. 2) Press to select and press SET or to set new program contents. 3) Press PROG . Cancel a Timer Recording: (Recording is in progress) Hold down STOP f[...]

32 Universal Remote Control is... The Remote Control may be set up to control some basic DSS or Cable box functions. The Universal Remote Control Setup 1 Cable Box Universal Remote Control Feature Press , FM, DVD or DSS CABLE on the remote control to select the desired mode. (See below for buttons available in each mode.) Once the remote control ha[...]

33 Advanced Operation • In DSS or CABLE mode, it may be necessary to press ENTER after pressing number keys for channel selection. • In DSS or CABLE mode, POWER, CH Up/Down, Number Keys, ACTION, PROG, DISPLAY/ENTER, SEARCH/SKIP-, R-TUNE, SELECT, SET, CM SKIP/ZERO/SKIP+, COUNTER RESET/ZOOM, ANGLE, AUDIO, TITLE, SUB TITLE, MENU, or ADD/DLT are no[...]

34 Search System is ... Each time a recording is made, an invisible index mark is placed on the tape. When timer recordings are made, program index and information are also included. These index marks can be used to access or scan recordings. T ape Operation 1 Press SEARCH * in Playback or Stop mode to display INDEX SEARCH screen, and then press nu[...]

35 Advanced Operation Program End Search Locates end point of recording for continuity. Press SEARCH twice in Playback or Stop mode to display PROGRAM END SEARCH screen . 1 SEARCH START : FF EX I T : SEARCH PROGRAM END SEARCH Press FF to start search. Example of Program End Search operation. Fig.1 Fig.2 Fig.3 If search exceeds a few seconds in BLAN[...]

36 T ape Operation (continued) Repeat Play Set to see a recording over and over. Zero Search To quickly return to a specific tape counter location. 1 2 Press STOP. 4 5 3 Continue playback, rewind, or fast forward. Press COUNTER RESET at the desired position to reset to “0:00:00.” Press DISPLAY * during playback to display the Counter. Press CM/[...]

37 Advanced Operation Press CM/ZERO repeatedly to select skip time in Playback mode. Commercial Skip By pressing the CM/ZERO button in Playback mode you can skip over 1 to 3 minutes of recorded tape in just a few seconds. • No indication appears. ■ ■ ■ ■ ■ Auto Shut Off No broadcast signal in TV mode (Only when Weak Signal Display is se[...]

38 ANT ENN A : C ABLE A U T O S E T C H A NNE L CAP T I ON W EAK S I GNAL D I SPLAY : OFF SELE C T : SET : SET END : ACT I O N SET UP CH A NNE L 1 2 Press ACTION * to display MAIN MENU. Channel Caption 1) Press to select “CH.” 2) Press SET to display SET UP CHANNEL screen. 3 1) Press to select CHANNEL CAPTION. 2) Press SET to display screen. 5 [...]

39 Advanced Operation Remote Warning Feature 1 Press ACTION twice to return to normal screen. When Universal Remote Control (page 32) is used, and this feature is set to “ON,” a warning appears whenever an invalid key is pressed in DSS or Cable mode. 2 4 3 Press ACTION to display MAIN MENU. 1) Press to select “TV.” 2) Press SET to display S[...]

40 V -Chip Control Feature Press ACTION * to display MAIN MENU. Enter Secret Code A 4-digit code must be entered to view a blocked program or change rating settings. 1 • Some rental movies do not include V-Chip data. • DO NOT forget your secret code. • Once ratings are set, restricted tapes or programs cannot be accessed unless the secret cod[...]

41 Advanced Operation 1 1) Press to select US MOVIES. 2) Press SET to set “ON” or “OFF.” If LOCK menu is not displayed, perform “Enter Secret Code” steps on page 40. ■ “ON” ➛ ➛ ➛ ➛ ➛ V-Chip Control is activated. ■ “OFF” ➛ ➛ ➛ ➛ ➛ V-Chip Control is deactivated. US MOVIES Ratings Process of V-Chip Control F[...]

42 1 1) Press * to select US TV PROGRAMS. 2) Press SET to set “ON” or “OFF.” US TV PROGRAMS Ratings Process of V-Chip Control Feature Blocking Enter Code Setup ■ “ON” ➛ ➛ ➛ ➛ ➛ V-Chip Control is activated. ■ “OFF” ➛ ➛ ➛ ➛ ➛ V-Chip Control is deactivated. V -Chip Contr ol Feature (continued) If LOCK menu is no[...]

43 Advanced Operation Process of V-Chip Control Feature Enter Code Setup Blocking * Important: If a remote control button does not work when pressed, press the button on the remote and try the button again. Blocking Message • If a program or movie exceeds the ratings you have set, a message will appear on a black background and sound is muted. &l[...]

44 With the proper audio mode setting, your unit can: • record and playback MTS stereo broadcast (main language) in stereo Hi-Fi. Stereo sound is recorded on the left and right audio tracks and on the video portion of a tape. • record and playback a monaural broadcast (main language) or SAP (Secondary Audio Program, usually in a second language[...]

45 Advanced Operation DVD Volume Adjust 1 Audio recorded on a DVD or Video CD often incorporates a dynamic range of sound. This means that, when compared to a music CD, etc., the average volume is generally lower and the peaks may be higher. This unit can be set so that the volume is increased automatically. Press ACTION * to display MAIN MENU. * I[...]

46 Video / A udio Menu 1 Press ACTION * to display MAIN MENU. Audio Menu Video Menu a Do steps 1 - 3 left. This feature allows easy setting of picture and sound suitable for each program source. 1) Press to select “AUDIO MENU.” 2) Press SET to select desired mode. (See below.) SELE C T : SET : SET END : ACT I O N SET UP V I DEO / A UD I O V I D[...]

47 Advanced Operation 1 Press ACTION to display MAIN MENU. Audio Adjustment Video Adjustment 6 Press ACTION four times to end setup. 1) Press to select “TV.” 2) Press SET to display SET UP TV screen. 2 M A I N M EN U DVD LOCK CH C L OC K TV LANGUAGE END : ACT I O N SE L E C T : SET : SET 5 3 1 1) Press to select “SET UP VIDEO/AUDIO.” 2) Pre[...]

48 AUD I O : 1 ENG Dolby Digital 3/2.1ch SELECT SELECT : : SE SE T: T: SET SET Hello AUD I O : 3 ESP Dolby Digital 3/2.1ch SELECT SELECT : : SE SE T: T: SET SET Hola T e amo • When closed captioning is used along with subtitles, they may ov erlap . If so, turn one function off . (See pages 24 and 25.) • If after several presses of the button th[...]

49 Advanced Operation When appears on the screen while a button is being pressed, it means that the corresponding operation is prohibited by the unit or the disc. • ANGLE Indicator lights up on the unit when a scene recorded at different angles is detected. • The angle number can be set beforehand so that the angle is switched whenever ANGLE In[...]

50 Some DVDs have more than one title, e.g. movies. If the disc offers a title menu, you can select the desired title number. (Operation may vary according to the disc.) 1 Press TITLE * in Play mode to display title screen. Title menu (DVD only) • Pressing TITLE again resumes play from the scene when TITLE was first pressed. DVDs may offer a spec[...]

51 Advanced Operation • Up to 15 tracks can be programmed. •“ ” or “ ” (depending on disc) indicates additional PROGRAM PLAY screen. Press for next or previous screen. • To clear the last program one by one, Press to move to “CLEAR LAST” and press SET . ( Pressing CLEAR also clears last program.) • To clear all programs, Press t[...]

52 Tracks are played in a random order. Random Play (Video CD/CD) Press ACTION * in Stop mode to display MAIN MENU. 1 Disc Operation ( continued ) 1) Press to select “DVD.” 2) Press SET to display screen. 2 M A I N M EN U DVD LOCK CH C L OC K TV LANGUAGE END : ACT I O N SE L E C T : SET : SET 5 3 1 1) Press to select “PLAY MODE.” 2) Press S[...]

53 Advanced Operation 1 Press DISPLAY in Play or Stop mode to display “On-Screen Display.” When DISPLAY is pressed, On-Screen Displays show disc information (title/chapter/track number, elapsed playing time) and unit information (repeat play, Play mode). • Each press of DISPLAY changes the on-screen display as follows. (Please refer to page 5[...]

54 DVD Operation using On-Screen Displays (continued) Detailed Descriptions of Each On-Screen Display 1. TITLE No. • Change the No. by pressing * or the NUMBER keys , and press SET . 2. Chapter No. • Change the No. by pressing or the NUMBER keys , and press SET . 3. Disc currently being played 4. Elapsed playing time The screen may be changed b[...]

55 Advanced Operation TITLE chapter chapter chapter CHAPTER REPEAT TITLE REPEAT NORMAL PLAY CURRENT PLAYBACK POSITION track track track TRACK REPEAT DISK REPEAT NORMAL PLAY CURRENT PLAYBACK POSITION • CHAPTER/TITLE REPEAT PLAY (DVD) • TRACK/DISC REPEAT PLAY (Video CD/CD) For your reference a. Repeat Play Detailed Descriptions of Each On-Screen [...]

56 PLAY PLAY MODE : NORMAL 00 : 00 : 00 MP3 MENU ROOT . . VA END _ W ALTZ TECHNO DD _ CUB I C POPS N O CTURNE J AZZ N O RN MP3 Pla yback Operation 1 Press POWER* on the remote or unit. Press OPEN/CLOSE, and then place a MP3 disc into the disc tray. Press OPEN/CLOSE to close. 2 MP3 Playback You can use this unit to play MP3 format audio recorded for[...]

57 1 1) Press to select “DVD LOCK.” 2) Press SET to set “ON” or “OFF.” DVD Lock Ratings (DVD only) ■ “ON” ➛ ➛ ➛ ➛ ➛ DVD Lock is activated. ■ “OFF” ➛ ➛ ➛ ➛ ➛ DVD Lock is deactivated. LEVEL 1 : LOCK ALL: Playback of all DVDs, CDs and Video CDs is prohibited. (Use to prohibit play of mature theme DVDs not en[...]

58 DISC LANGUAGES (DVD only) To select and set the language of the audio soundtrack, subtitles, or title/DVD menus for all discs to be played. “A UDIO” selections T o select the audio soundtrac k language. (factory preset: English) English/Spanish/French/Japanese Original: Original disc language OTHER ✱✱✱✱ : Other language selection* 1 [...]

59 • Make settings according to amplifier connected to optical audio output as shown in above table. • When a dts decoder is not connected, to enjoy dts DVD, please select audio output other than dts on the dts DVD menu screen. Otherwise, there will be no sound from the unit speakers. *1 Audio output from unit is converted to 48 kHz/16 bit in a[...]

60 STILL MODE 1 1) Press * to select “STILL MODE.” 2) Press SET repeatedly for mode. (See below) 2 Do steps 1 and 2 on page 58. AU T O : “FIELD” (Field still) or “FRAME” (F rame still) is automatically selected during the still mode. (Factory preset) FIELD: “FIELD” (Field still) is always selected. This setting will reduce jitter wh[...]

61 For Your Information Language Code List Enter the appropriate code number for the initial settings “AUDIO”, “SUBTITLE” and/ or “MENUS” (see page 58). Code Language 6565 Afar 6566 Abkhazian 6570 Afrikaans 6577 Ameharic 6582 Arabic 6583 Assamese 6588 Aymara 6590 Azerbaijani 6665 Bashkir 6669 Byelorussian 6671 Bulgarian 6672 Bihari 6678[...]

62 Bef ore Requesting Ser vice Remote Control Unit cannot be controlled... ACTION, PLAY, SELECT, SET POWER, etc. buttons cannot be selected... Correction • Aim Remote directly at the remote sensor on the unit. (P. 10) • Avoid any object blocking signal path. • Inspect the remote batteries. (P. 4) • Make sure VCR LOCK is set to off. (P. 39) [...]

63 For Your Information DVD/Video CD/CD Pla y fails to star t e ven when PLA Y is pressed... Play starts but then stops immediately ... Picture is distorted during rapid advance or rapid reverse... No Forward/Reverse search play ... Play does not start even when title is selected... Audio soundtrack and/or subtitle language is not the one selected [...]

64 W arning and Instruction Displa ys OSD PLEASE SET CLOCK BEFORE PROGRAMMING CHECK CASSETTE RECORD TAB TO CANCEL TIMER REC HOLD DOWN STOP KEY FOR APPROX 3 SEC NO CASSETTE PLEASE INSERT A CASSETTE PLEASE PREPARE FOR TIMER REC Caution If you attempt to set or review a Timer Recording or set the On-Timer and the Clock is not set... If you press REC, [...]

65 For Your Information OSD VIDEO HEADS MAY NEED CLEANING PLEASE INSERT HEAD CLEANING CASSETTE OR REFER TO MANUAL END: PLAY VCR LOCK ACTIVATED PLEASE CHECK THE DISC, AND FOR STAINS OR SCRATCHES ON DISC IT IS PROHIBITED TO COPY DVD/ VIDEO CD/CD TO VHS Caution If head cleaning becomes necessary while playing back a tape... If you press a function but[...]

66 Index A Accessories ............................................... 4 AC Power Plug ......................................... 11 ACTION button .................................... 8, 16 ADD / DLT / CLEAR button ................. 8, 17 Audio Adjustment ..................................... 47 Audio Auto Gain Control (AGC) ............... 46 AUDIO[...]

67 For Your Information A ANGLE button ...................................... 8, 49 ANGLE Indicator .................................. 9, 49 Auto-Power Off function .......................... 21 AUDIO button ....................................... 8, 48 AUDIO OUTPUT ..................................... 59 Audio soundtrack language (DVD) ......... [...]

Panasonic Br oadcast & T elevision Systems Compan y Division of Matsushita Electric Corporation of America Executive Office: One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7000 Eastern Zone: One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7621 Central Region: 1707 N Randall Road E1-C-1, Elgin, IL 60123 (847) 468-5200 Western Zone: 33[...]