Panasonic CF-28 Series manual

OPERA TING INSTRUCTIONS Personal Computer ® Appendix LIMITED USE LICENSE AGREEMENT ........ 26 Names and Functions of Parts ...................... 28 Specifications ................................................ 30 LIMITED W ARRANTY ................................... 32 T roubleshooting List of Error Codes ......................................[...]

2 Getting Started Introduction Thank you for purchasing the Panasonic computer . Read the operating instructions thoroughly for proper operation of your new computer . Illustrations and T erminology in this Manual Copyright This manual is copyrighted by Matsushita Electric Industrial Co., Ltd. with all rights reserved. No part of this manual may be[...]

3 Getting Started Read Me First Federal Communications Commission Radio Frequency Interference Statement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential[...]

4 Getting Started Read Me First For Canada Industry Canada (IC) Notice for modem This equipment contains an Industry Canada approved modem unit. The Industry Canada label is affixed on the modem unit. EQUIPMENT A TT ACHMENT LIMIT A TIONS “NOTICE: The Industry Canada label identifies certified equipment. This certification means that the equipment[...]

5 Getting Started A void Radio Frequency Interfer ence Do not place the computer near a television or radio receiver . Precautions The CF-28 was developed based on thorough research into the real-world portable computing environments. Exhaustive pur- suit of usability and reliability under harsh conditions led to innovations such has the magnesium [...]

6 Getting Started Care should be exercised with regard to the following in or- der to avoid the possibility of overheating, fire or damage. A void Heat Do not throw the battery pack into a fire or ex- pose it to excessive heat. Do Not Disassemble Do not insert sharp objects into the battery pack, expose it to bumps or shocks, deform, disassemble, o[...]

7 Getting Started Saving Data on the Hard Disk Users ar e advised to pur chase the latest versions of virus pr otection softwar e and use them regularly . W e recommend you run the software: • When booting your computer . • After receiving data. W e recommend that you check data received on disks or from external sources, such as data downloade[...]

8 Getting Started Read Me First Place the computer on a flat stable surface. In use: T emperature: 5 °C to 35 °C {41 °F to 95 °F} Humidity: 30% to 80% RH (No condensation) Not in use: T emperature: -20 °C to 60 °C {-4 °F to 140 °F} Humidity: 30% to 90% RH (No condensation) Usage Environment Handling This computer has been designed so as to [...]

9 Getting Started 2 Read the LIMITED USE LICENSE AGREEMENT ( page 26) Before removing the seal covering the power switch, read the LIMITED USE LICENSE AGREEMENT . 3 Insert the battery pack 1 T urn your computer over, and slide the latches inward. 2 Lift open the cover holding both sides and remove the cover . 3 Insert the battery pack into the comp[...]

10 Getting Started 6 T urn your computer on Rotate the power switch clockwise and hold it for approximately one second until the power indicator turns on before releasing it. Power Switch Do not rotate the power switch repeatedly . Once the computer is powered of f, you must wait at least ten seconds before powering it on again. 4 Connect your comp[...]

11 Getting Started 8 Setup Windows Moving the cursor ( ) or clicking buttons can be performed with the touch pad. 7 Dual OS Select the Operating System W indows 2000 and Windows XP are preinstalled on the computer . After one of them is selected with the following procedure, only that operating system can be used. 1 At the screen for the agreement [...]

12 Getting Started First-time Operation This concludes the first-time use operation guidelines. 1 At the [W elcome to the W indows XP Setup Wizard], select [Next]. 2 After reading the agreement, select [I accept this agreement] or [I don't accept this agreement], then select [Next]. 3 Select settings for your region, then select [Next]. 4 Ente[...]

13 Getting Started When [Y ou do not need to make “BACKUP DISK”] is displayed (procedure 2 below), there is no need to create a BACKUP DISK. If this message is not displayed, create backup disks for reinstallation. T o create backup disks, the floppy disk drive and format- ted 2HD floppy disks are needed. 1 Make sur e a disk is not in the write[...]

14 Operation 1 Open the display Starting Up/Shutting Down Starting Up 2 T urn your computer on Rotate the power switch clockwise and hold it for approximately one second until the power indicator turns on before releasing it. Under the condition that both the AC adaptor and the port replicator are not connected, the power will not go on if the disp[...]

15 Operation The power saving function is factory set, so if there is no input from a key , the touch pad, the touchscreen (only for models with touchscreen) or an external mouse (when one is connected) for a certain interval of time, the power to the LCD and hard disk may be turned of f. The LCD will resume operation when the touch pad, the touchs[...]

16 Operation Starting Up/Shutting Down Shutting Down (power off your computer) This procedure is shutting down without using the standby or hibernation function. ( “Standby/Hibernation Functions” ) From the keyboard, Y ou may choose to press down on , then select the menu with or . Restarting your computer (without shutting down) Windows 2000 S[...]

17 Operation Function T ouch Pad (Basic Operation) Use the touch pad to move the cursor on the display and perform normal computer operations. For instructions on how to operate, refer to "Touch Pad (Advanced)". If a key combination such as Fn + F5 is used while the pad is being touched, the function of the key combination will not work. [...]

18 Operation The Reference Manual can be accessed on your computer . When a printer is connected, the Reference Manual can also be printed. This manual explains functions for you to make greater use of the computer , such as how to add peripheral devices, how the Setu p Utility works and other useful information. Run the Reference Manual 1 T urn yo[...]

19 T roubleshooting The following is a list of the messages that BIOS can display . Most of them occur during POST . Some of them display informa- tion about a hardware device, e.g., the amount of memory installed. Others may indicate a problem with a device, such as the way it has been configured. Following the list are explanations of the message[...]

T roubleshooting 20 02F5: DMA T est Failed ServerBIOS2 test error: Cannot write to extended DMA (Direct Memory Access) registers. 02F6: Softwar e NMI Failed ServerBIOS2 test error: Cannot generate software NMI (Non-Maskable Interrupt). 02F7: Fail - Safe T imer NMI Failed ServerBIOS2 test error: Fail-Safe Timer takes too long. device address Conflic[...]

21 T roubleshooting The power indicator or bat- tery indicator is not lit is displayed POST Startup Error(s) is displayed Windows startup, or an op- eration is extremely slow The date and time are incor- rect When resuming fr om th e standby or hibernation mode, does not appear even if a password has been set in the Setup Utility When the administr[...]

T roubleshooting 22 No display after powering on The power has not been turned off, but after a cer- tain period of time, there i s no display The cursor cannot be con- trolled An afterimage appears (e.g., green, r ed, and blue dots remain on the display) or ther e ar e dots not display- ing the correct colors The external display no longer display[...]

23 T roubleshooting The Reference Manual is not displayed Windows cannot be shut down or restar ted Shutting down Do not shut down Windows during music playback. If a USB device is connected, try removing it. W as an attempt made to shut down (or restart) W indows while the computer was con- nected to a network drive using a LAN? W ith the followin[...]

T roubleshooting 24 Reinstalling Software Before Reinstallation Preparing Y ou will need the followings: • Product Recovery CD-ROM • If it was necessary to create BACKUP DISKS ( page 13), you will need the BACKUP DISKS (e.g., FIRST A I D FD) and the floppy disk drive. • The optional CD drive (Confirm the latest information on optional product[...]

25 T roubleshooting 12 When the message [Press F2 to enter SETUP] is displayed, press F2 and then run the Setup Utility . If the password has been set, enter the Supervisor Pass- word. 13 Press F9 . At the confirmation message, select [Y es] and press Enter . (The Setup Utility settings will return to their default values. Even the security setting[...]

26 Appendix YOU MA Y NOT REVERSE ASSEMBLE, REVERSE COMPILE, OR MECHANICALL Y OR ELECTRONICALL Y TRACE THE PROGRAMS, OR ANY COPY THEREOF , IN WHOLE OR IN P A R T . YOU MA Y NOT USE, COPY , MODIFY , A L TER, OR TRANSFER THE PROGRAMS OR ANY COPY THEREOF , IN WHOLE OR IN P A R T , EXCEPT AS EXPRESSL Y PROVIDED IN THE LICENSE. IF YOU TRANSFER POSSESSION[...]

27 Appendix Contrat de licence d’usage limité Le(s) logiciel(s) (les “Logiciels”) fournis avec ce produit Panasonic ® (le “Produit”) sont exclusivement concédés en licence à l’utilisateur ultime (“vous”), et ils ne peuvent être utilisés que conformément aux clauses contractuelles ci- dessous. En utilisant les logiciels, vous[...]

28 Appendix Names and Functions of Parts ( “LED Indicators”) ( page 17) The illustrations shown may differ from the actual physical appearances. LED Indicators ( “LED Indicators”) LCD T ouch Pad (Only for models with touchscreen: “T ouchscreen”) For information on the key combinations avail- able ( “Key Combinations” ) . Function Ke[...]

29 Appendix USB Port ( “USB Device”) Parallel Port Serial Port External Display Port Expansion Bus Conn ector ( “Port Replicator”) Use this connector to connect headphones or ampli- fier-equipped speakers. Audio output from the inter- nal speaker is disabled when headphones or external speakers are connected. Microphone Jack Use only a mona[...]

30 Appendix CF-28PTJAZQM CF-28PRJAZQM CF-28P3JAZQM CF-28PTJAZDM CF-28PRJAZDM CF-28P3JAZDM CF-28PTJAZKM CF-28PRJAZKM CF-28P3JAZKM CF-28PMJAZQM CF-28PMJAZDM CF-28PMJAZKM Mobile Intel ® Pentium ® III Processor-M 800 MHz featuring Intel ® SpeedStep TM technology L1 Cache Memory: 32 KB L2 (Second) Cache Memory: 512 KB 256 MB (512 MB Max.) UMA (32 MB [...]

31 Appendix Model No. AC Adaptor* 8 Input Output Power Consumption* 9 Environment In u se T emperature Humidity Not in use T emperature Humidity Physical Dimensions (W x H x D) Weight (including the carrying handle) CF-28PTJAZQM CF-28PTJAZDM CF-28PTJAZKM CF-28PMJAZQM CF-28PMJAZDM CF-28PMJAZKM CF-28PRJAZQM CF-28PRJAZDM CF-28PRJAZKM CF-28P3JAZQM CF-2[...]

32 Appendix LIMITED W ARRANTY P ANASONIC PERSONAL COMPUTER AND PERIPHERALS LIMITED W ARRANTY Panasonic Computer Solutions Company (referred to as “Panasonic”) will repair this product (other than software, which is covered by a separate warranty) with new or rebuilt parts, free of charge in the U.S.A. for three (3) years from the date of origin[...]

33 Appendix P ANASONIC COMPUTER AND PERIPHERALS LIMITED W ARRANTY Coverage – Panasonic Canada Inc. (“PCI”) warrants to you, the first end user customer , this computer product (excluding software media) , when purchased from PCI or from a PCI authorized reseller , to be free from defects in materials and workmanship under normal use, su bject[...]

34 Memo[...]

35[...]

Outline of the International E NERGY S TA R ® Office Equipment Program The international E NERGY S TA R ® Office Equipment Program is an international program that promotes energy saving through the use of computers and other of fice equipment. The program backs the development and dissemination of products with functions that e f fectively reduc[...]