Panasonic KX-TG2564S manual

Preparation Basic Operation Advanced Operation Useful Information PLEASE READ BEFORE USE AND SAVE. Panasonic World Wide Web address: http://www.panasonic.com for customers in the USA or Puerto Rico Charge the battery for about 15 hours before initial use. Caller ID Compatible 2.4GHz Cordless Phone Operating Instructions Model No. KX-TG2564S Pulse-o[...]

Before Initial Use 2 Please read IMPORTANT SAFETY INSTRUCTIONS on page 71 before use. Read and understand all instructions. Thank you for purchasing your new Panasonic cordless telephone. Attach your purchase receipt here. For your future reference Serial No. Date of purchase (found on the bottom of the unit) Name and address of dealer Caller ID an[...]

For assistance, please call: 1-800-211-PANA(7262) For Best Performance 3 Battery Charge A rechargeable Ni-Cd battery powers the cordless handset. Charge the battery for about 15 hours before initial use (p. 11). Raise the antennas. Base Unit Location/Noise Calls are transmitted between the base unit and the cordless handset using wireless radio wav[...]

Preparation Location of Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Connections . . . . . . . . . . . . . . . . . . . . [...]

Voice Mail Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Storing a Voice Mail Access Number (CordlessHandset) . . . . . . . . . 52 Setting the Voice Mail (VM) Tone Detection (CordlessHandset) . . . 54 Listening to Voice Mail Messages (CordlessHandset) (BaseUnit) . . . . 55 Special Features . . . . . . . . . . [...]

Location of Controls 6 Base unit 1 2 3 4 5 6 7 8 0 9 K X - T G 2 5 6 4 DIRECT Buttons (p . 48) Antenna (p . 3, 10) Antenna (p . 3, 10) (VM) (V oice mail) Button and Indicator (p . 52, 54, 55) (REDIAL) Button (p . 26) (TONE) Button (p . 56) (FLASH/CALLWAIT) Button (p . 57, 58) (HOLD) Button (p . 27)[...]

“ 7 For assistance, please call: 1-800-211-PANA(7262) Preparation 1 2 3 4 5 6 7 8 0 9 K X - T G 2 5 6 4 (FUNCTION/EDIT) Button (p . 18, 33) (CLEAR) Button (p . 37, 46) Displa y (p . 9, 65) (EXIT) Button (p . 18, 30, 43) Navigator K ey ( (‹) , (›) , (fi) , (fl) ) (p . 18, 27, 30, 42) (PAUSE) Button (p . 57) (RINGER) Button (p . 20) (LOCATOR/[...]

“ Location of Controls 8 Cordless handset T ALK 4 FL FL A SH SH REDIAL REDIAL CAL L W A L WA I T PAUSE PAUSE V O IC E M A IL VOICE MAIL T O N E TONE 7 8 9 0 M UTE MUTE FUNCTION FUNCTION INT ERCOM ERCOM HOLD 1 2 3 5 6 C H CH EDIT EDIT O F F OFF LOUD LOUD S E SE A R C RC H (CLEAR/INTERCOM/HOLD) Button (p. 24, 25, 37, 41, 46, 49) (FLASH/CALLWAIT/VO[...]

Cordless handset 1 The display shows the dialed number, call status, programming options and directory items etc. If you subscribe to a Caller ID service, caller information will be displayed (p. 29). The number of new calls will also be displayed. 2 The voice mail icon displays when the voice mail message(s) is/are recorded (p. 52). 3 The director[...]

10 Settings ≥ USE ONLY WITH Panasonic AC ADAPTOR PQLV10 (Order No. PQLV10Z). ≥ The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) ≥ Use only a Panasonic Handset for the KX-TG2564S. ≥ To connect a standard telephone on the same line, see page 64. ≥ If your unit is connected to a PBX w[...]

Charger unit ≥ USE ONLY WITH Panasonic AC ADAPTOR KX-TCA1 (Order No. KX-TCA1-G). ≥ The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) Battery Charge Place the cordless handset on the charger and charge for about 15 hours before initial use. ≥ Make sure the cordless handset faces forward [...]

Recharge battery 12 “ Settings Operation Approx. battery life While in use (TALK) Up to about 4.5 hours Up to about 3.5 hours Up to about 11 days While not in use (Standby) near the base unit* away from the base unit Recharge Recharge the battery when: —“ Recharge battery ” is displayed, —“ ” fl ashes on the display, or — the cordl[...]

Date:2002.04.15 0-9=Date 21 43 4 =Next Date and Time (BaseUnit) Make sure the base unit and cordless handset are not being used. 1 Press (FUNCTION/EDIT) . 2 Press (fl) ( Yes key) at “ Date and time ” . 3 Enter the current date (year, month, and day) using 4-digit numbers. (Ex. To set Apr. 15, 2002, enter “ 2002 ” and “ 0415 ” .) 4 Pre[...]

14 “ Settings For Caller ID service users (p. 29) ≥ The Caller ID information will reset the clock after the fi rst ring if the adjusted time and/or date is incorrect. ≥ If the time has not previously been set, the Caller ID information will not adjust the clock. ≥ The Caller ID information will automatically adjust the clock for daylight [...]

15 For assistance, please call: 1-800-211-PANA(7262) Preparation Dialing Mode (CordlessHandset) You can program the dialing mode using the cordless handset near the base unit . If you have touch tone service, set to “ Tone ” . If rotary or pulse service is used, set to “ Pulse ” . Your phone comes from the factory set to “ Tone ” . Mak[...]

16 “ Settings Line Mode (CordlessHandset) You can program the line mode using the cordless handset near the base unit . If the line is connected to a low voltage system such as a PBX, set to “ B ” . Otherwise the Call Waiting Caller ID Feature may not be used (p. 57). Your phone comes from the factory set to “ A ” . Make sure the base un[...]

17 For assistance, please call: 1-800-211-PANA(7262) Preparation Programmable Functions “ You can program the following function items using the cordless handset near the base unit . The display shows the programming instructions. See the corresponding pages for function details. Make sure the base unit and cordless handset are not being used. Du[...]

18 “ Programmable Functions You can program the following function items using the base unit . The display shows the programming instructions. See the corresponding pages for function details. Make sure the base unit and cordless handset are not being used. During programming *To select a desired function item, scroll through the items by pressin[...]

19 For assistance, please call: 1-800-211-PANA(7262) Preparation Auto Talk Feature (CordlessHandset) The Auto Talk feature allows you to answer a call by lifting the cordless handset off the charger without pressing . If you want to use this feature, turn the feature ON by programming. Your phone comes from the factory set to OFF. Make sure the ba[...]

20 “ Programmable Functions Ringer Volume You can program the cordless handset and base unit ringer volumes to HIGH, LOW or OFF. If set to OFF, the cordless handset and base unit will not ring. Your phone comes from the factory set to HIGH. Make sure the base unit and cordless handset are not being used. (CordlessHandset) 1 Press (MUTE/FUNCTION)[...]

21 For assistance, please call: 1-800-211-PANA(7262) Preparation LCD Contrast You can program the cordless handset and base unit LCD contrast (5 levels). To make the displays clearer, set to high level. Your phone comes from the factory set to level 3. Make sure the base unit and cordless handset are not being used. (CordlessHandset) 1 Press (MUTE[...]

22 “ Programmable Functions (BaseUnit) 1 Press (FUNCTION/EDIT) . 2 Scroll to “ LCD contrast ” by pressing (›) or (‹) . 3 Press (fl) ( Yes key). ≥ The current setting is displayed. 4 Select the desired contrast by pressing (›) or (‹) . ≥ Each time you press (›) or (‹) , the LCD contrast will change. 5 Press (fl) ( Save key).[...]

(CordlessHandset) To have a hands-free conversation, connect an optional headset to the handset (p. 62). 1 Press . 2 Dial a phone number. ≥ The dialed number is displayed. ≥ After a few seconds, the display will show the length of the call and the battery strength. 3 To hang up, press (OFF) or place the cordless handset on the charger. ≥ “[...]

24 To dial after confirming the entered number 1 Dial a phone number. ≥ If you misdial, press (CLEAR/INTERCOM/HOLD) and dial again. 2 Press . ≥ After a few seconds, the display will show the length of the call and the battery strength. 3 To hang up, press (OFF) or place the cordless handset on the charger. If noise interferes with the conversa[...]

To put a call on hold Press (CLEAR/INTERCOM/HOLD) . ≥ “ Line on HOLD. ” is displayed on the base unit. ≥ The DIGITAL SP-PHONE indicator fl ashes. ≥ If you put a call on hold for more than 6 minutes, an alarm tone will sound. The call will be disconnected after a total of 10 minutes. ≥ To transfer the call to the base unit, see page 50.[...]

(BaseUnit) You can make a call by simply lifting the handset and dialing the phone number. To hang up, place the handset on the cradle. Using the speakerphone 1 Press (DIGITAL–SP-PHONE) . ≥ The indicator lights. 2 Dial a telephone number. ≥ The dialed number is displayed. ≥ After a few seconds, the display will show the length of the call.[...]

To adjust the handset volume (3 levels) or speaker volume (8 levels) while talking To increase, press (‹) . To decrease, press (›) . ≥ The display shows the volume level for a few seconds. To put a call on hold Press (HOLD) . ≥ “ Line on HOLD. ” is displayed on the cordless handset. ≥ The DIGITAL SP-PHONE indicator fl ashes. ≥ If u[...]

28 Answering Calls When a call is received, the unit rings and “ Incoming call ” is displayed. If you subscribe to a Caller ID service, the calling party information will be displayed after the fi rst ring (p. 29). In order to view the Caller ID information, please wait until the second ring to answer a call. (CordlessHandset) Press . ≥ You[...]

Basic Operation 29 Caller ID Service This unit is compatible with a Caller ID service offered by your telephone company. If you subscribe to a Caller ID service, the calling party ’ s information will be shown on the cordless handset and the base unit after the fi rst ring. The unit can record information of up to 50 different callers, including[...]

Using the Caller List 30 Viewing the Caller List You can view the caller list with the cordless handset or the base unit. Caller List information includes the caller ’ s name and phone number, the time and date the call was received, and the number of times that caller called (p. 31). Make sure the base unit and cordless handset are not being use[...]

“ 31 Basic Operation • In some cases, you may have to edit the number before dialing (p. 32, 33). (Ex. You may have to delete “ 1 ” and the area code.) • If a phone number is not displayed in the caller information, you cannot call back that caller. What “ √ ” means When the display shows “ √ ” , you have already viewed this c[...]

32 “ Using the Caller List Editing the Caller ’ s Phone Number You can edit a phone number into one of 3 patterns to call back or store it into the directory. Make sure the base unit and cordless handset are not being used. (CordlessHandset) 1 Press (›) or (‹) to enter the Caller List. 2 Scroll to the desired caller by pressing (›) or (?[...]

Basic Operation 33 “ (BaseUnit) 1 Press (›) or (‹) to enter the Caller List. 2 Scroll to the desired caller by pressing (›) or (‹) , and press (FUNCTION/EDIT) . 3 Press (FUNCTION/EDIT) to select a pattern. ≥ Each time you press (FUNCTION/EDIT) , the number is rearranged into one of 3 patterns. a (7 digit pattern) b – (10 digit patter[...]

34 “ Using the Caller List The Caller ID Number Auto Edit Feature (CordlessHandset) There are 3 patterns of phone number ( a , b , and c , p. 32, 33). This feature allows your phone to automatically edit an in-coming Caller ID number into one pattern you preferred, and display the Caller ID number with that pattern on the base unit and cordless [...]

“ 35 Basic Operation 4 Scroll to “ Caller ID edit ” by pressing (›) or (‹) . 5 Press (fl) ( Yes key). 6 Select “ On ” or “ Off ” by pressing (›) or (‹) . 7 Press (fl) ( Save key). ≥ A beep sounds. ≥ To exit the programming mode, press (OFF) . ≥ When the feature is set to OFF, the unit will still be able to display Call[...]

36 “ Using the Caller List Storing Caller List Information in the Directory (CordlessHandset) You can store phone numbers that are in the Caller List into the directory. Storing must be carried out with the cordless handset. Make sure the base unit and cordless handset are not being used. 1 Press (›) or (‹) to enter the Caller List. 2 Scroll[...]

Basic Operation 37 (CordlessHandset) 1 Press (›) or (‹) to enter the Caller List. 2 Scroll to the caller you want to erase from the Caller List by pressing (›) or (‹) . 3 Press (CLEAR/INTERCOM/HOLD) . ≥ A beep sounds and the information is erased. ≥ To erase other items, repeat from step 2. ≥ To exit the Caller List, press (OFF) . (B[...]

38 (CordlessHandset) 1 Press (›) or (‹) to enter the Caller List. 2 Press (CLEAR/INTERCOM/HOLD) . 3 Scroll to “ All clear ” by pressing (›) or (‹) . 4 Press (fl) ( Yes key) or (CLEAR/INTERCOM/HOLD) . ≥ A beep sounds and all entries are erased. ≥ The cordless handset will exit the Caller List. (BaseUnit) 1 Press (›) or (‹) to [...]

Advanced Operation 39 For assistance, please call: 1-800-211-PANA(7262) Directory “ You can store up to 50 names and phone numbers in the directory using the cordless handset. All directory items are sorted by the first word in alphabetical order. Using the directory, you can make a call by selecting a name on the display of the cordless handset[...]

3 Enter a name, up to 15 characters, with the dialing buttons, (fi) or (fl) . ≥ See the steps for entering names and symbols (p. 41). ≥ If a name is not required, press (›) ( Next key) and go to step 5. 4 Press (›) ( Next key). 5 Enter a phone number, up to 22 digits. ≥ Each time you press (CLEAR/INTERCOM/HOLD) , a digit is erased. To e[...]

Advanced Operation “ 41 For assistance, please call: 1-800-211-PANA(7262) (1) (2) (3) (4) (5) (6) (7) (8) (9) (0) (fi) (fl) 123456789 1 0 1 1 Number of times key is pressed Entering Names and Symbols (CordlessHandset) The cordless handset dialing buttons ( (0) to (9) ) can be used to enter letters and symbols. The letters are printed on the di[...]

42 “ Directory For example, to enter “Tom Jones”: 1 Press (8) four times. 2 Press (6) three times, then press (fl) . 3 Press (6) once, then press (fl) twice. 4 Press (5) four times, press (6) three times, then press (fl) . 5 Press (6) twice, press (3) twice, then press (7) four times. Finding Stored Items (CordlessHandset) (BaseUnit) You[...]

“ 43 For assistance, please call: 1-800-211-PANA(7262) Advanced Operation 3 Scroll to the desired item by pressing (›) or (‹) . ≥ All directory items are stored in the order shown on the right. To search for a name by initial 1 Press the dialing button for the fi rst letter of the desired name until any name with the same initial is displa[...]

44 Dialing (CordlessHandset) (BaseUnit) “” is displayed only on the cordless handset display. Make sure the base unit and cordless handset are not being used. 1 Press (fi) or (fl) to enter the directory list. 2 Press (›) or (‹) . ≥ The fi rst item is displayed. 3 Scroll to the desired item that you want to dial by pressing (›) or ([...]

“ 45 For assistance, please call: 1-800-211-PANA(7262) Advanced Operation Editing (CordlessHandset) Make sure the base unit and cordless handset are not being used. 1 Press (fi) or (fl) to enter the directory list. 2 Press (›) or (‹) . ≥ The fi rst item is displayed. 3 Scroll to the directory item you want to change by pressing (›) or[...]

“ Directory 46 7 Press (›) ( Next key). ≥ If you want to change the storing name or number, press (‹) ( Edit key) repeatedly to reach the desired display and change it. 8 When fi nished, press (fl) ( Save key). ≥ A beep sounds. ≥ To continue editing other items, repeat from step 3. ≥ To exit the directory list, press (OFF) . ≥ You[...]

Advanced Operation 47 For assistance, please call: 1-800-211-PANA(7262) One -Touch Dialer “ Storing Phone Numbers in Memory (BaseUnit) You can store up to 3 phone numbers in the DIRECT buttons. Make sure the base unit and cordless handset are not being used. 1 Press (FUNCTION/EDIT) . 2 Scroll to “ Save DIRECT# ” by pressing (›) or (‹) . [...]

“ One -Touch Dialer 48 5 Press (fl) ( Yes key). 6 Enter a phone number, up to 22 digits. ≥ Each time you press (CLEAR) , a digit is erased. To erase all of the digits, press and hold (CLEAR) . ≥ To move the cursor, press (fi) or (fl) . 7 Press (›) ( Next key). 8 Press (fl) ( Save key). ≥ A beep sounds. ≥ To store other numbers, repe[...]

Advanced Operation 49 For assistance, please call: 1-800-211-PANA(7262) Intercom “ (CordlessHandset) (BaseUnit) A 2-way intercom is possible between the cordless handset and the base unit. Paging the base unit from the cordless handset 1 Cordless handset: Press (CLEAR/INTERCOM/HOLD) . Talk to the paged party after the beeps. ≥ “ Intercom ?[...]

50 “ Intercom During an intercom call: ≥ If the cordless handset user has difficulty hearing the base unit user, decrease the base unit speaker volume by pressing (›) . ≥ If an incoming call is received, the intercom call stops and the unit starts to ring. To answer, press , (DIGITALSP-PHONE) or place the handset and lift it again. The int[...]

Advanced Operation 51 For assistance, please call: 1-800-211-PANA(7262) Conference (CordlessHandset) 1 Cordless handset: During a call, press (CLEAR/INTERCOM/HOLD) . ≥ The call is put on hold and “ Line on HOLD. To transfer press INTERCOM. ” is displayed. 2 Press (CLEAR/INTERCOM/HOLD) again. Talk to the paged party after the beeps. ≥ If th[...]

52 Voice Mail Service Voice mail service is an electronic on-line answering system offered by your telephone company. After subscribing, the voice mail system can answer calls automatically for you when your line is busy or if calls are not answered, and caller can leave their messages at the voice mail box virtually located at the telephone compan[...]

53 For assistance, please call: 1-800-211-PANA(7262) Advanced Operation “ 3 Press (fl) ( Yes key). 4 Scroll to “ Save VM access# ” by pressing (›) or (‹) . 5 Press (fl) ( Yes key). 6 Enter your access number, up to 32 digits. ≥ You may enter pauses* (see below). ≥ Each time you press (CLEAR/INTERCOM/HOLD) , a digit is erased. To era[...]

54 “ Voice Mail Service Setting the Voice Mail (VM) Tone Detection (CordlessHandset) Your telephone company sends special signals (Voice mail tones) to activate the VM indicator. Press or (DIGITALSP-PHONE) to listen to the dial tone. If you hear a series of dial tones followed by a continuous dial tone, this is indication that a new message was[...]

55 For assistance, please call: 1-800-211-PANA(7262) Advanced Operation Listening to Voice Mail Messages After the voice mail box having received messages, the unit will indicate it in two ways: (a) “ Voice mail ” and “” will display, and (b) the VM (Voice mail) indicator on the base unit will fl ash. To listen to your voice mail message(s[...]

56 Special Features Temporary Tone Dialing (For Rotary or Pulse Service Users) (CordlessHandset) (BaseUnit) Press (TONE) before entering access numbers which require tone dialing. ≥ The dialing mode changes to tone. You can enter numbers to access an answering service, electronic banking service, etc. When you hang up, the mode will return to p[...]

Advanced Operation 57 For assistance, please call: 1-800-211-PANA(7262) For Call Waiting Service Users (CordlessHandset) (BaseUnit) Press (FLASH/CALLWAIT/VOICEMAIL) or (FLASH/CALLWAIT) if you hear a call-waiting tone while talking. ≥ The fi rst call is put on hold and you can answer the second call. ≥ To return to the fi rst caller, pres[...]

58 “ Special Features FLASH Button (CordlessHandset) (BaseUnit) Pressing (FLASH/CALLWAIT/VOICEMAIL) or (FLASH/CALLWAIT) allows you to use special features of your host PBX such as transferring an extension call or accessing special telephone services (optional) such as call waiting. ≥ Pressing (FLASH/CALLWAIT/VOICEMAIL) or (FLASH/CALLWA[...]

59 For assistance, please call: 1-800-211-PANA(7262) Advanced Operation Security Code Setting (CordlessHandset&BaseUnit) If “ No link to base. Walk closer to base & try again ” is displayed even if you use the cordless handset near the base unit, the cordless handset may lose communication with the base unit. It is necessary to set [...]

Base unit The base unit can be mounted on a wall phone plate. 1 Pull down the handset hook until it locks, so the tab holds the handset. 2 Press the tabs in the direction of the arrows ( 1 ), then remove the wall mounting adaptor ( 2 ). 3 Connect the AC adaptor. Tuck the telephone line cord inside the wall mounting adaptor, then push it in the dire[...]

4 Connect the telephone line cord. Mount the base unit, then slide down. ≥ Raise the antennas. Charger unit The charger can be wall mounted. Connect the AC adaptor. Install screws using the wall template (p. 60). Mount the charger ( 1 ). Slide it down ( 2 ), then slide down to the right ( 3 ) until it is secured. 61 For assistance, please call: 1[...]

62 Optional Headset Plugging an optional headset into the cordless handset allows a hands- free phone conversation. Please use only the Panasonic KX-TCA88 headset. To order, call the accessories telephone number on page 2. Connecting the optional headset to the cordless handset Open the headset jack cover, and connect the optional headset to the he[...]

63 For assistance, please call: 1-800-211-PANA(7262) Useful Information Battery Replacement If “ Recharge battery ” is displayed and/or “” fl ashes after a few telephone calls even if the battery was fully charged, replace the battery with a new Panasonic PQP510SVC (P-P510) battery. To order, call the accessories telephone number on page 2[...]

If the unit detects a problem, one of the following messages will be displayed on the cordless handset or the base unit. Cordless handset display The battery needs to be charged. Place the cordless handset on the charger to charge the battery (p. 12). The cordless handset has lost communication with the base unit. Move closer to the base unit and t[...]

65 For assistance, please call: 1-800-211-PANA(7262) Useful Information While the base unit was being used, (›) or (‹) was pressed to search the Caller List/directory list, (fl) was pressed to select an option or (CLEAR/INTERCOM/HOLD) was pressed. While storing items in the directory, the cordless handset has lost communication with the base u[...]

Troubleshooting 66 Problem “ No link to base. Walk closer to base & try again ” is displayed on the cordless handset display and an alarm tone sounds. Static, sound cuts in/out, fades. Interference from other electrical units. The cordless handset does not ring. The cordless handset display is blank. You cannot store a name and phone number[...]

67 For assistance, please call: 1-800-211-PANA(7262) Useful Information “ Problem The cordless handset does not display the caller ’ s name and/or phone number. The cordless handset display exits the Caller List or directory. When a second call is received during a conversation, the cordless handset does not display the new caller ’ s name an[...]

“ Troubleshooting 68 Problem You cannot have a conversation using the cordless handset. You cannot have a conversation using the optional headset. Cause and Remedy ≥ When the optional headset is connected (p. 62), you must use the headset to talk with the caller. To have a normal cordless phone conversation, disconnect the headset. ≥ Make sur[...]

“ 69 For assistance, please call: 1-800-211-PANA(7262) Useful Information Problem You cannot page a cordless handset. You cannot redial by pressing (REDIAL) . Cause and Remedy ≥ The cordless handset is too far from the base unit. ≥ The cordless handset is engaged in an outside call or viewing the Caller List/directory list. Try again. Wait un[...]

“ Troubleshooting 70 Problem Previously programmed information is erased. “ Recharge battery ” is displayed on the cordless handset, “” fl ashes or the unit beeps intermittently. You charged the battery fully, but “ Recharge battery ” is still displayed and/or “” continues to fl ash. If you cannot solve your problem Cause and Re[...]

Important Safety Instructions “ 71 For assistance, please call: 1-800-211-PANA(7262) Useful Information When using this unit, basic safety precautions should always be followed to reduce the risk of fi re, electric shock, or personal injury. 1 1. Read and understand all instructions. 1 2. Follow all warnings and instructions marked on this unit.[...]

72 CAUTION: To reduce the risk of fi re or injury to persons, read and follow these instructions. 1. Use only the battery(ies) speci fi ed. 2. Do not dispose of the battery(ies) in a fi re. They may explode. Check with local waste management codes for special disposal instructions. 3. Do not open or mutilate the battery(ies). Released electrolyt[...]

FCC and Other Information “ 73 For assistance, please call: 1-800-211-PANA(7262) Useful Information This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identi fi er in the format US:ACJ-----. If requested, this[...]

74 “ FCC and Other Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensu[...]

75 For assistance, please call: 1-800-211-PANA(7262) Useful Information ≥ Environment — do not place the unit in a room where the temperature is less than 5 o C (41 o F) or greater than 40 o C (104 o F). Allow 10 cm (4 q ) clearance around the unit for proper ventilation. Avoid excessive smoke, dust, mechanical vibration, shock, or direct sunli[...]

Specifications 76 ∫ Base unit Power Supply: AC Adaptor (120 V AC, 60 Hz) Power Consumption: Standby: Approx. 3.0 W Maximum: Approx. 7.0 W Frequency: 2.401 GHz – 2.471 GHz Dimensions (H k k W k k D): Approx. 90 mm k 192 mm k 210 mm (3 17 ⁄ 32 qk 7 9 ⁄ 16 qk 8 1 ⁄ 4 q ) Mass (Weight): Approx. 720 g (1.59 lb.) ∫ Charger Power Supply: AC A[...]

Panasonic Telephone Products Limited Warranty Limited Warranty Coverage If your product does not work properly because of a defect in materials or workmanship, Panasonic Consumer Electronics Company or Panasonic Sales Company (collectively referred to as “ the warrantor ” ) will, for the length of the period indicated on the chart below, which [...]

THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED WARRANTY COVERAGE”. THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. (As examples, this excludes damages for lost time, lost calls or messages, cost of having someone remove or[...]

79 For assistance, please call: 1-800-211-PANA(7262) Useful Information Index A Accessories ................................... 2 Answering calls Base Unit .................................. 28 Cordless Handset ..................... 28 Auto talk ................................ 19, 28 B Backlit LCD ........................... 25, 27 Base location .[...]

For product service ≥ Call 1-800-211-PANA(7262) for the location of an authorized servicenter. ≥ Panasonic ’ s e-mail address for customer inquiries: consumerproducts@panasonic.com for customers in the USA or Puerto Rico ONLY When you ship the product ≥ Carefully pack your unit, preferably in the original carton. ≥ Attach a letter, detail[...]