Panasonic TH-152UX1 manual

Model No. TH-152UX1 Please read these instructions before operating your set and retain them for future reference. English Contents Operating Instructions High De fi nition Plasma Display For more detailed instructions, refer to the Operating Instructions on the CD-ROM. Important Safety Instructions ● .................................. 3 FCC ST [...]

2 Dear Panasonic Customer W elcome to the Panasonic family of customers. W e hope that you will have many years of enjoyment fr om your new Plasma Display . T o obtain maximum benefit fr om your set, please r ead these Instructions befor e making any adjustments, and r etain them for futur e r efer ence. Retain your pur chase r eceipt also, and not[...]

W ARNING: T o reduce the risk of electric shock, do not remove cover or back. No user-serviceable parts inside. Refer servicing to quali fi ed service personnel. The lightning flash with arrow-head within a triangle is in tend ed to tell the user that parts inside the product are a risk of electric shock to per sons. The exclamation point within a[...]

4 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed an[...]

5 T rademark Credits • VGA is a trademark of International Business Machines Corporation. • Macintosh is a registered trademark of Apple Inc., USA. • SVGA, XGA, SXGA and UXGA are registered trademarks of the Video Electronics Standard Association. Even if no special notation has been made of company or product trademarks, these trademarks hav[...]

6 Safety Precautions W ARNING Setup This Plasma Display is for use only with the following optional accessories. Use with any other type of optional accessories may cause instability which could result in the possibility of injury . (All of the following accessories are manufactured by Panasonic Corporation.) Always be sure to ask a quali fi ed te[...]

7 Safety Precautions When using the Plasma Display The Plasma Display is designed to operate on 200 - 240 V AC, 50/60 Hz. Do not cover the ventilation holes. • Doing so may cause the Plasma Display to overheat, which can cause fi re or damage to the Plasma Display . Do not stick any foreign objects into the Plasma Display . • Do not insert any[...]

8 Safety Precautions CAUTION When using the Plasma Display Do not bring your hands, face or objects close to the ventilation holes of the Plasma Display . • Heated air comes out from the ventilation holes at the top of Plasma Display will be hot. Do not bring your hands or face, or objects which cannot withstand heat, close to this port, otherwis[...]

9 Safety Precautions W ARNING Small Parts 3D Eyewear contains small parts (battery and specialised band, etc.) and must be kept out of reach of small children to avoid accidental ingestion. Disassembly Do not disassemble or modify the 3D Eyewear . Lithium Battery Batteries must not be exposed to excessive heat such as sunshine, fi re or the like. [...]

10 Safety Precautions Viewing 3D Content Content for 3D viewing includes commercially available Blu-ray discs, 3D broadcasts, etc. When preparing your own 3D content, ensure that it is properly produced. Do not use the 3D Eyewear if you have a history of over-sensitivity to light, heart problems, or have any other existing medical conditions. Pleas[...]

11 Accessories Supply Accessories Fixing band × 3 TMME203 Nut cover × 3 (M20) Nut cover × 3 (M16) Batteries for the Remote Control T ransmitter (R6 (AA) Size × 2) Remote Control T ransmitter N2QA YB000560 Operating Instruction book Check that you have the accessories and items shown Remote Control Batteries Requires two R6 (AA) batteries. 1. Pu[...]

12 Connections V ideo equipment connection 1 2 Pass the attached cable fi xing band through the clip as shown in the fi gure. T o secure cables connected to T erminals, wrap the cable fi xing band around them then pass the pointed end through the locking block, as shown in the fi gure. While ensuring there is suf fi cient slack in cables to mi[...]

13 Power On / Off Press the button on the remote control to turn the Plasma Display off. Power Indicator: Red (standby) Press the button on the remote control to turn the Plasma Display on. Power Indicator: Green T urn the power to the Plasma Display off by pressing the switch on the unit, when the Plasma Display is on or in standby mode. Note: Dur[...]

14 Power On / Off Italiano Español ENGLISH (US) English (UK) Deutsch Français OSD Language Set Select When 3D images will be viewed by unspeci fi ed number of people or used for commercial applications, someone in authority should convey the following precautions. These precautions should be followed in the home as well. 3D Viewing/ 3D Content/ [...]

Press to select the input signal to be played back from the equipment which has been connected to the Plasma Display . HDMI input terminal in HDMI 1. HDMI input terminal in HDMI 2. Input terminal in T erminal Board.* 4k2k HD-SDI input terminal in SDI IN. 4k2k DVI-D input terminal in DVI-D IN. PC input terminal in PC IN. * “SLOT INPUT” appears w[...]

16 Normal Viewing Picture Pos. /Size Setup Basic Controls Main Unit INPUT MENU ENTER/ Right side surface Remote control sensor Main Power On / Off Switch Power Indicator The Power Indicator will light. • Power-OFF .... Indicator not illuminated (The unit will still consume some power as long as the power supply is connected to the unit.) • Stan[...]

17 Basic Controls Remote Control T ransmitter Standby (ON / OFF) button The Plasma Display must fi rst be turned on at the power switch (see page 13). Press this button to turn the Plasma Display On, from Standby mode. Press it again to turn the Plasma Display Off to Standby mode. PC button Press to select PC IN input. (see page 15) SLOT buttons P[...]

Remote Control Unit 1 Display the menu screen. Press several times. Each time the MENU button is pressed, the menu screen will switch. 2 Select the item. 25 0 0 0 5 Picture Normal Normalise Normal Brightness Sharpness Picture Mode Colour Contrast Hue Advanced settings Memory save White balance Normal Memory load Memory edit (Example: Picture menu) [...]

Speci fi cations TH-152UX1 Power Source 200 - 240 V AC, 50/60 Hz Power Consumption Power on 3700 W Stand-by condition 0.5 W Power off condition 0.3 W Plasma Display panel Drive method : AC type 152-inch, 17:9 aspect ratio Screen size 134.4” (W) × 70.9” (H) × 152.0” (diagonal) / 3,416 mm (W) × 1,801 mm (H) × 3,862 mm (diagonal) (No.of pix[...]

Panasonic Solutions Company Unit of Panasonic Corporation of North America Three Panasonic W ay 2F-5 Secaucus, NJ 07094 Panasonic Professional Flat Panel Display Limited W arranty Models or Parts Part W arranty Labor W arranty Professional Flat Panel Display LIMITS AND EXCLUSIONS There are no express warranties except as listed above. THE W ARRANT [...]

21 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 LIMITED W ARRANTY ST A TEMENT Item Video Tape P2/SD Cards Video Heads D5 Video heads Maintenance Items Colour Camera CCD Imaging Block BT-H Series LCD Monitors * DLP™ Projectors * LCD Projectors above 2,500 ANSI Lumens * LCD Projectors below 2,500 ANSI Lumens Projector Lamps[...]

22[...]

Memo 23[...]

Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries[...]