Panasonic TH-85PF12E manual

Model No. Operating Instructions High De fi nition Plasma Display TH-85PF12E Please read these instructions before operating your set and retain them for future reference. English The illustration shown is an image.[...]

2 Dear Panasonic Customer W elcome to the Panasonic family of customers. W e hope that you will have many years of enjoyment fr om your new Plasma Display . T o obtain maximum benefit fr om your set, please r ead these Instructions befor e making any adjustments, and r etain them for futur e r efer ence. Retain your pur chase r eceipt also, and not[...]

3 Important Safety Notice W ARNING 1) T o prevent damage which may result in fi re or shock hazard, do not expose this appliance to dripping or splashing. Do not place containers with water ( fl ower vase, cups, cosmetics, etc.) above the set. (including on shelves above, etc.) No naked fl ame sources, such as lighted candles, should be placed o[...]

4 Safety Precautions W ARNING Setup This Plasma Display is for use only with the following optional accessories. Use with any other type of optional accessories may cause instability which could result in the possibility of injury . (All of the following accessories are manufactured by Panasonic Corporation.) Always be sure to ask a quali fi ed te[...]

5 Safety Precautions When using the Plasma Display The Plasma Display is designed to operate on 220 - 240 V AC, 50/60 Hz. Do not cover the ventilation holes. • Doing so may cause the Plasma Display to overheat, which can cause fi re or damage to the Plasma Display . Do not stick any foreign objects into the Plasma Display . • Do not insert any[...]

6 Safety Precautions CAUTION When using the Plasma Display Do not bring your hands, face or objects close to the ventilation holes of the Plasma Display . • Heated air comes out from the ventilation holes at the top of Plasma Display will be hot. Do not bring your hands or face, or objects which cannot withstand heat, close to this port, otherwis[...]

+ + - - 7 Accessories Supply Accessories Clamper × 1 Eyebolt cap × 1 Blind sheet × 1 Allen wrench Eyebolt × 1 (M12) Ferrite core × 2 Noise cut fi lter Batteries for the Remote Control T ransmitter (R6(UM3) Size × 2) Power supply cord Fixing band × 2 Remote Control T ransmitter EUR7636090R Operating Instruction book Check that you have the a[...]

SERIAL PC IN AUDIO SLOT1 SLOT3 P R /C R /R P B /C B /B Y/G COMPONENT/RGB IN LAN SLOT2 AUDIO AUDIO DVI-D IN 1 2 AUDIO OUT R L AUDIO OUT R L 8 Connections Stereophonic sound code line-in audio equipment AUDIO OUT T erminals connection AC cord connection (see page 12) Pass the attached cable fi xing band through the clip as shown in the fi gure. T o[...]

AUDIO PC IN 9 Connections 1 6 7 8 3 9 4 5 10 15 14 13 12 1 1 2 Notes: • With regard to the typical PC input signals that are described in the applicable input signals list (see page 63), adjustment values such as for the standard picture positions and sizes have already been stored in this unit. Y ou can add up to eight PC input signal types that[...]

SERIAL 6 7 8 9 1 3 4 5 2 10 SERIAL T erminals connection Notes: • Use the RS-232C straight cable to connect the computer to the Plasma Display . • The computer shown is for example purposes only . • Additional equipment and cables shown are not supplied with this set. The SERIAL terminal conforms to the RS-232C interface speci fi cation, so [...]

SLOT2 AUDIO DVI-D IN SLOT3 P R /C R /R P B /C B /B Y/G COMPONENT/RGB IN LAN AUDIO AUDIO OUT Y, P B ,P R , OUT P R P B Y L R COMPONEN T VIDEO OUT 11 Connections DVI-D connection Mini-plug (M3) DVI-D video cable (Within 5 m) PC with DVI-D video out Pin No. Signal Name Pin No. Signal Name 1 T .M.D.S. data 2- 13 2 T .M.D.S. data 2+ 14 +5 V DC 3 T .M.D.[...]

Right side surface Main Power On / Off Switch 12 Power On / Off Connecting the AC cord plug to the Plasma Display . Fix the AC cord plug securely to the Plasma Display with the clamper . (see page 8) Press the button on the remote control to turn the Plasma Display off. Power Indicator: Red (standby) Press the button on the remote control to turn t[...]

Italiano Español ENGLISH (US) English (UK) Deutsch Français OSD Language Set Select PRESENT TIME Setup PRESENT TIME MON 99:99 Set PRESENT TIME 99:99 DA Y MON PRESENT TIME Setup PRESENT TIME MON 99:99 Set PRESENT TIME 10:00 DA Y TUE Landscape Portrait Display orientation PC 16:9 NANODRIFT 13 From the second time on, the below screen is displayed f[...]

INPUT MENU VOL ENTER / + / - / 14 Selecting the input signal Notes: • Selecting is also possible by pressing the INPUT button on the unit. • Input terminal will not be selected if the terminal board is not installed into the SLOT . • Select to match the signals from the source connected to the component/RGB input terminals. (see page 48) • [...]

15 Basic Controls Main Unit INPUT MENU VO L ENTER/ + / - / Right side surface Remote control sensor Main Power On / Off Switch Power Indicator The Power Indicator will light. • Power-OFF .... Indicator not illuminated (The unit will still consume some power as long as the power cord is still inserted into the wall outlet.) • Standby ........ Re[...]

16 Basic Controls Standby (ON / OFF) button The Plasma Display must fi rst be plugged into the wall outlet and turned on at the power switch (see page 12). Press ON to turn the Plasma Display On, from Standby mode. Press OFF to turn the Plasma Display Off to Standby mode. SET UP button (see page 21) SOUND button (see page 32) DIRECT INPUT buttons [...]

Zoom1 Zoom2 Just Panasonic Auto Zoom3 16:9 4:3 14:9 [from the unit] VOL ENTER/ + / - / Right side surface 17 ASPECT Controls The Plasma Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture. For HD signal input [1 125 (1080) / 60i • 50i • 60p • 50p • 24p • 25p • 30p • 24sF[...]

18 MUL TI PIP Y ou can display two pictures, such as a video image and computer image, in a two-screen display . (Use the remote control for this operation. It cannot be performed with the buttons on the main unit.) MUL TI PIP Setup Set the functions and mode for two-screen display in “MUL TI PIP Setup” in the Setup menu. (see page 45) Selectin[...]

19 MUL TI PIP T ransparent Function and Insertion Function: T wo functions are available for blend PIP: the transparent function and the insertion function. Set these functions with “T ransparency” or “Insert” in “MUL TI PIP Setup”. (see page 45) T ransparent Function: Data such as text are displayed transparently on the background imag[...]

s 1 s 2 s 3 s 4 1 Exit 2 Exit 2 20 Digital Zoom 1 3 2 4 This displays an enlargement of the designated part of the displayed image. Display the operation guide. Press to access Digital Zoom. The operation guide will be displayed. Select the area of the image to be enlarged. Press on the enlargement location to select. Select the magni ?[...]

21 On-Screen Menu Displays Remote Control Unit 1 Display the menu screen. Press to select. (Example: Picture menu) MENU Press several times. Each time the MENU button is pressed, the menu screen will switch. Normal Viewing Picture Sound Pos. /Size Setup 2 Select the item. 25 0 0 0 5 Picture Normal Normalise Normal Brightness Sharpness Picture Mode [...]

2/2 Setup MUL TI DISPLA Y Setup Set up TIMER PRESENT TIME Setup Network Setup Display orientation Landscape MUL TI PIP Setup Portrait Setup 2/2 Sound Out Left Channel Right Channel Channel 1 Channel 1 Off Level Meter Off SDI Sound Output 1/2 Signal Screensaver Extended life settings PC Off Standby save Of f Power management Off Auto power off Off O[...]

0 Normal Normalise Auto Setup Pos. /Size V -Pos 0 H-Pos V -Size Dot Clock H-Size Clock Phase 1:1 Pixel Mode Off 0 0 0 0 0 0 0 Normal Normalise Pos. /Size V -Pos H-Pos 0 V -Size H-Size 1:1 Pixel Mode Off Auto Setup 23 Adjusting Pos. /Size 1 Press to display the Pos. /Size menu. Press to select the menu to adjust. Press to adjust the menu. Press to e[...]

24 Adjusting POS. /SIZE H-Pos Adjust the horizontal position. V -Pos Adjust the vertical position. H-Size Adjust the horizontal size. V -Size Adjust the vertical size. Dot Clock (During “Component”, “RGB” and “PC” input signal) Periodic striped pattern interference (noise) may occur when a striped pattern is displayed. If this happens, [...]

25 1:1 Pixel Mode Adjusts the display size when 1 125i, 1 125p or 1250i signal is input. Notes: • Select On when you would like to replay 1920 × 1080 input signal. • Applicable input signal; 1 125 (1080) / 50i · 60i · 24sF · 24p · 25p · 30p · 50p · 60p, 1250 (1080) / 50i • Select Off when fl ickering is shown around the image. • H-[...]

25 0 0 0 5 Picture Normal Normalise Normal Brightness Sharpness Picture Mode Colour Contrast Hue Colour Management Advanced settings White balance Normal Off Black extension AGC Gamma Input level Advanced settings Normal Normalise W/B Low B W/B High R W/B Low R W/B Low G W/B High G W/B High B 0 0 2.2 0 0 0 0 0 0 Off 26 1 2 Press to display the Pict[...]

27 Picture Adjustments Notes: • “Colour” and “Hue” settings cannot be adjusted for “RGB/PC” input signal. • Y ou can change the level of each function (Contrast, Brightness, Colour , Hue, Sharpness) for each Picture Mode. • The setting details for normal, dynamic and cinema respectively are memorized separately for each input term[...]

28 Picture Pro fi les Up to 8 combinations of picture adjustment values (in the Picture menu and Advanced settings) can be stored in the display memory as pro fi les and applied as needed, for a convenient way to enjoy your preferred picture settings. Custom picture 18 0 0 0 3 Picture Normal Normalise Dynamic Brightness Sharpness Picture Mode Col[...]

29 Picture Pro fi les Saving pro fi les Follow these steps to save picture adjustment values as pro fi les. Note: When the settings are locked in “Extended life settings”, pro fi les cannot be saved. 1 Specify the picture quality in the Picture menu and Advanced settings. (see page 26, 27) 2 In the Picture menu, select “Memory save”. Me[...]

30 1 In the Picture menu, select “Memory load”. Memory save Memory load Memory edit 1 select 2 access Loading pro fi les Load pro fi les and apply the picture adjustment values to the display as follows. Notes: • Loaded pro fi les are stored in memory according to the selected input terminal (SLOT1, 2, 3 or PC IN). (see page 14) • When t[...]

31 Picture Pro fi les Y ou can lock saved pro fi les to restrict operations when the pro fi les are loaded. Y ou can also set passwords. Notes: • When the lock is set in “Extended life settings”, pro fi le cannot be locked. • If pro fi le is locked, the menu operations of “Extended life settings” are restricted. (see page 38) <L[...]

32 Picture Pro fi les Note: Make a note of the new password to remember it. 1 Follow steps 1–4 in the previous procedure, <Locking and unlocking pro fi les>. 2 Select “Change password”. Memory lock Off Change password MEMORY3 Off MEMORY4 Lock1 MEMORY1 Off MEMORY2 isf Mode Off 1 select 2 access <Changing passwords> 3 Enter a new [...]

Sound Normal Normalise 0 0 0 Off T reble 0 Mid Balance Bass Surround Main Audio Out (PIP) 1/2 33 Sound Adjustment 1 Press to display the Sound menu. Press to select the menu to adjust. Select the desired level by listening to the sound. 2 Select to adjust each item. While the “Sound” menu is displayed, if either the N button on the remote contr[...]

PRESENT TIME Setup Set PRESENT TIME 99:99 DA Y MON PRESENT TIME MON 99:99 2/2 Setup MUL TI DISPLA Y Setup MUL TI PIP Setup Portrait Setup Set up TIMER PRESENT TIME Setup Network Setup Display orientation Landscape 0:00 0:00 Set up TIMER POWER OFF Function POWER ON Function Off Off PRESENT TIME 99:99 POWER OFF T ime POWER ON T ime 34 PRESENT TIME Se[...]

Screensaver Start Function Scrolling bar only Mode Off PRESENT TIME 99:99 1/2 Signal Screensaver Extended life settings PC Off Standby save Off Power management Off Auto power off Off OSD Language English ( UK ) Component/RGB-in select RGB Input label Power save Setup 35 Screensaver (For preventing image retention) Do not display a still picture, e[...]

Screensaver Start Function Mode Finish T ime Start T ime Scrolling bar only T ime Designation 6:15 12:30 PRESENT TIME 15:00 Screensaver Start Function Mode Operating T ime Periodic T ime Scrolling bar only Interval 12:00 3:00 PRESENT TIME 15:00 Screensaver Start Function Mode Screensaver duration Scrolling bar only Standby after SCR Saver 6:15 PRES[...]

1/2 Signal Screensaver Extended life settings PC Off Standby save Off Power management Off Auto power off Off OSD Language English ( UK ) Component/RGB-in select RGB Input label Power save Setup Express settings Custom settings Reset Extended life settings 30 Picture Mode Contrast Extended life settings Dynamic Side panel NANODRIFT Saver Lock setti[...]

38 Note: This function does not work in the following cases. When “MUL TI DISPLA Y Setup” is set to “On” When “PORTRAIT Setup” is set to “On” When in digital zoom mode Peak limit On: Suppresses image contrast (peak brightness). Note: When a still picture is viewed for an extended time, the screen may become slightly darker . (see pa[...]

39 Reduces screen image retention Custom settings Set the individual “Image Retention Reduction” menu. 1 Select “Custom settings”. Express settings Custom settings Reset Extended life settings 1 select 2 access 2 T o set each menu to the recommended setting: Select “Recommended settings”. Picture Mode Contrast Extended life settings Dyn[...]

1/2 Signal Screensaver Extended life settings PC Off Standby save Off Power management Off Auto power off Off OSD Language English ( UK ) Component/RGB-in select RGB Input label Power save Setup 40 Reduces power consumption Press to select “Power save” “Standby save” “Power management” “Auto power off”. Press to select “On” or ?[...]

1/2 Signal Screensaver Extended life settings PC Off Standby save Off Power management Off Auto power off Off OSD Language English ( UK ) Component/RGB-in select RGB Input label Power save Setup 1/2 Signal PC Off Standby save Off Power management Off Auto power off Off OSD Language English ( UK ) Component/RGB-in select RGB Input label Power save S[...]

2/2 Setup MUL TI DISPLA Y Setup MUL TI PIP Setup Portrait Setup Set up TIMER Network Setup PRESENT TIME Setup Display orientation Landscape 42 Display orientation Sets the fan control and the display style of on-screen menu for vertical installation. Press to display the Setup menu. Press to select Display orientation. Press to select “Landscape?[...]

2/2 Setup MUL TI DISPLA Y Setup MUL TI PIP Setup Portrait Setup Set up TIMER Network Setup PRESENT TIME Setup Display orientation Landscape MUL TI DISPLA Y Setup Off Horizontal Scale × 2 V ertical Scale × 2 Seam hides video Of f Location A1 AI-synchronization Off MUL TI DISPLA Y Setup 43 Press to display the Setup menu. Press to select the MUL TI[...]

44 Setup for MUL TI DISPLA Y Item Details AI-Synchronization Select “Off” or “On”. The brightness depends on each display’s setting. Equalize the brightness of all the displays. Off On Note: If you set AI-synchronization to On, the following menus will be unavailable and these settings will be fi xed to the initial values. Picture menu: [...]

45 PIP — Off 0% Off 1 MUL TI PIP Setup MUL TI PIP Display Mode T ransparency T ransparency level Insert Insert level 2/2 Setup MUL TI DISPLA Y Setup MUL TI PIP Setup Portrait Setup Set up TIMER MUL TI PIP Setup Set the two-screen display function that is activated when is pressed. Press to select the MUL TI PIP Setup. Press to display the “MUL [...]

46 2/2 Setup MUL TI DISPLA Y Setup MUL TI PIP Setup Portrait Setup Set up TIMER Network Setup PRESENT TIME Setup Display orientation Landscape Off Portrait Setup Seam hides video Off 1 Off AI-synchronization Viewing Area Location 16 : 9 Portrait Setup Off Portrait Setup Seam hides video Off 1 Off AI-synchronization Viewing Area Location 16 : 9 Port[...]

47 Off Portrait Setup Seam hides video Off 1 Off AI-synchronization Viewing Area Location 16 : 9 Portrait Setup Off Portrait Setup Seam hides video Off 1 Off AI-synchronization Viewing Area Location 16 : 9 Portrait Setup Set up for Portrait Press to exit from adjust mode. 7 Press to select AI-synchronization. Press to select “Off” , “On”. A[...]

1/2 Signal Screensaver Extended life settings PC Off Standby save Off Power management Off Auto power off Off OSD Language English ( UK ) Component/RGB-in select RGB Input label Power save Setup 1/2 Signal Screensaver Extended life settings PC Off Standby save Off Power management Off Auto power off Off OSD Language English ( UK ) YUV/RGB-in select[...]

3D Y/C Filter (NTSC) On 1/2 Signal Screensaver Extended life settings PC Off Standby save Off Power management Off Auto power off Off OSD Language English ( UK ) Component/RGB-in select RGB Input label Power save Setup 3D Y/C Filter (NTSC) Colour system Signal On Auto Cinema reality Panasonic Auto (4:3) Off 4:3 [ AV ] Noise reduction Of f Cinema re[...]

3D Y/C Filter (NTSC) Colour system Signal On Auto Cinema reality Panasonic Auto (4 : 3) Off 4 : 3 [ A V ] Noise reduction Off Cinema reality Off y XGA Mode Auto 50 Setup for Input Signals Colour system / Panasonic Auto Select Signal from the “Setup” menu during A V(S Video) input signal. (“Signal [A V]” menu is displayed.) Press to select t[...]

Advanced NR [ AV ] Mosquito NR P-NR Block NR Off Off Off Advanced NR [ Digital ] Mosquito NR P-NR Block NR Off Off Off Advanced NR [ Component ] Mosquito NR P-NR Block NR Off Off Off Advanced NR [ RGB ] Mosquito NR P-NR Block NR Off Off Off () Noise reduction Off Noise reduction Advanced 51 Press to select “Noise reduction”. Press to select “[...]

Sync Auto Sync on G Sync VBS H-Freq. V -Freq. kHz Hz 63.98 60.02 Signal Format 1280×1024/60 Sync Signal [ RGB ] Cinema reality XGA Mode Auto Off Auto H-Freq. Dot Clock Freq. kHz MHz 63.98 108.0 V- F r e q . H z 60.02 Signal Format 1280×1024/60 52 Select Signal from the “Setup” menu during RGB input signal. Setting RGB sync signal: Con fi rm [...]

MUL TI DISPLA Y Setup Set up TIMER PRESENT TIME Setup Network Setup Display orientation Landscape MUL TI PIP Setup Portrait Setup 2/2 Setup --:--:--:--:--:-- DHCP Network Setup Save 0 192.168. 0. 8 255.255.255. 0 192.168. 0. 1 1024 Auto RS-232C Off Subnet mask LAN Speed Gateway IP address Port Control I/F Select Network ID MAC address 53 Network Se[...]

Options Enable Off-timer function Normal Initial Power Mode 0 ID select Off Remote ID Off Serial ID Off Display size Off Studio W/B Off Studio Gain 2/3 3/3 Options O f f Off Off Clock Display Rotate Off All Aspect Manual Auto Setup Slot1 Serial Slot Select Slot power Off Power On Screen Delay Options Weekly Command Timer 1/3 Initial INPUT Onscreen [...]

55 Options Adjustments Item Adjustments INPUT lock Off PC INPUT1 INPUT2 INPUT3 Locks the input switch operation. Notes: • Only the adjusted signal is displayed (see page 14). • Signal can be displayed when the T erminal board is installed. • Input switch can be used when this is set to “Off”. • In two screen display mode, if anything ot[...]

56 Options Adjustments Item Adjustments Studio W/B Off: Nullify all the settings adjusted. On: Sets the colour temperature for TV studio. Note: V alid only when the “Warm” is set as “White balance” in Picture menu. Studio Gain Sharpens the contrast for a better view when a part of the image is too light to see. Off: Disables “Studio Gain?[...]

Weekly Command Timer Program1 Monday On Function Program3 Tuesday --- Wednesday Program3 Thursday --- Friday Program6 Saturday Program4 Sunday Program Edit y Program3 Thursday --- Friday Program6 Saturday Program4 Sunday Program Edit Weekly Command Timer 8:00 10:30 01 02 1/8 --:-- 03 --:-- 04 --:-- --:-- 05 12:00 06 9:12 PON IMS:SL1 --- --- --- ---[...]

1/2 Signal PC Off Standby save Off Power management Off Auto power off Off OSD Language English ( UK ) Component/RGB-in select RGB Input label Power save Setup Screensaver Extended life settings Shipping YES NO Weekly Command Timer 02 10:30 Command No Time IMS:SL1 Command 1 Program Weekly Command Timer Command 02 Command No IMS:SL1 10:30 Time 1 Pro[...]

SLOT3 P R /C R /R P B /C B /B Y/G COMPONENT/RGB IN LAN AUDIO 59 Using Network Function This unit has a network function to control the network connected display with your computer . Note: T o use the network function, set each “Network Setup” setting and make sure to set the “Control I/F Select” to “LAN”. (see page 53) When “LAN” is[...]

60 Using Network Function PJLink™ Protocol The network function of the unit conforms with PJLink™ class 1 and you can operate the following actions from your computer using PJLink™ protocol. • Display setup • Display status query Supported commands Commands to control the unit with PJLink™ protocol are shown in the table below . PJLink?[...]

61 T roubleshooting Before you call for service, determine the symptoms and make a few simple checks as shown below . Symptoms Checks Picture Sound Interference Noisy Sound Electrical Appliances Cars / Motorcycles Fluorescent light Normal Picture No Sound V olume (Check whether the mute function has been activated on the remote control.) No Picture[...]

62 List of Aspect Modes Aspect mode Picture Enlarged screen Description All Aspect: On Factory setting All Aspect: Off 16:9 16:9 The display of the pictures fi lls the screen. In the case of SD signals, pictures with a 4:3 aspect ratio are enlarged horizontally , and displayed. This mode is suited to displaying anamorphic pictures with a 16:9 aspe[...]

63 Applicable Input Signals *Mark: Applicable input signal Signal name Horizontal frequency (kHz) V ertical frequency (Hz) COMPONENT / RGB IN / PC IN (Dot clock (MHz)) DVI-D IN (Dot clock (MHz)) 1 525 (480) / 60i 15.73 59.94 * (13.5) 2 525 (480) / 60p 31.47 59.94 * (27.0) ∗ 5 * (27.0) 3 625 (575) / 50i 15.63 50.00 * (13.5) 4 625 (575) / 50p 31.25[...]

64 Command list of W eekly Command T imer No. Command Control details 1 AAC:MENCLR ∗ 1 Audio Menu (Clear) 2 AAC:MENDYN ∗ 1 Audio Menu (Dynamic) 3 AAC:MENSTD ∗ 1 Audio Menu (Standard) 4 AAC:SURMON Surround (ON) 5 AAC:SUROFF Surround (OFF) 6 AMT :0 Audio Mute (OFF) 7 AMT :1 Audio Mute (ON) 8 ASO:M Audio out when PIP mode (Main Picture) 9 ASO:S [...]

65 Speci fi cations TH-85PF12E Power Source 220 - 240 V AC, 50/60 Hz Power Consumption Power on 1,100 W Stand-by condition Save off 1.2 W , Save on 0.7 W Power off condition 0.4 W Plasma Display panel Drive method : AC type 85-inch, 16:9 aspect ratio Screen size 1,889 mm (W) × 1,062 mm (H) × 2,167 mm (diagonal) (No.of pixels) 2,073,600 (1,920 (W[...]

Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries[...]