Ir a la página of
manuales de instrucciones parecidos
-
DVD Recorder
Panasonic DMR-E80H
64 páginas 2.18 mb -
DVD Recorder
Panasonic DMR-ES30
3 páginas 0.09 mb -
DVD Recorder
Panasonic DMR-EH57
80 páginas 5.99 mb -
DVD Recorder
Panasonic DMR-ES16
48 páginas 2.81 mb -
DVD Recorder
Panasonic DMR-EX77
88 páginas 6.99 mb -
DVD recorder
Panasonic DMR-ES35
60 páginas 4.45 mb -
DVD Recorder
Panasonic DMR-ES10
48 páginas 3.71 mb -
DVD Recorder
Panasonic VW-BN2PP
24 páginas 1.31 mb
Buen manual de instrucciones
Las leyes obligan al vendedor a entregarle al comprador, junto con el producto, el manual de instrucciones Panasonic WJ-HD309. La falta del manual o facilitar información incorrecta al consumidor constituyen una base de reclamación por no estar de acuerdo el producto con el contrato. Según la ley, está permitido adjuntar un manual de otra forma que no sea en papel, lo cual últimamente es bastante común y los fabricantes nos facilitan un manual gráfico, su versión electrónica Panasonic WJ-HD309 o vídeos de instrucciones para usuarios. La condición es que tenga una forma legible y entendible.
¿Qué es un manual de instrucciones?
El nombre proviene de la palabra latina “instructio”, es decir, ordenar. Por lo tanto, en un manual Panasonic WJ-HD309 se puede encontrar la descripción de las etapas de actuación. El propósito de un manual es enseñar, facilitar el encendido o el uso de un dispositivo o la realización de acciones concretas. Un manual de instrucciones también es una fuente de información acerca de un objeto o un servicio, es una pista.
Desafortunadamente pocos usuarios destinan su tiempo a leer manuales Panasonic WJ-HD309, sin embargo, un buen manual nos permite, no solo conocer una cantidad de funcionalidades adicionales del dispositivo comprado, sino también evitar la mayoría de fallos.
Entonces, ¿qué debe contener el manual de instrucciones perfecto?
Sobre todo, un manual de instrucciones Panasonic WJ-HD309 debe contener:
- información acerca de las especificaciones técnicas del dispositivo Panasonic WJ-HD309
- nombre de fabricante y año de fabricación del dispositivo Panasonic WJ-HD309
- condiciones de uso, configuración y mantenimiento del dispositivo Panasonic WJ-HD309
- marcas de seguridad y certificados que confirmen su concordancia con determinadas normativas
¿Por qué no leemos los manuales de instrucciones?
Normalmente es por la falta de tiempo y seguridad acerca de las funcionalidades determinadas de los dispositivos comprados. Desafortunadamente la conexión y el encendido de Panasonic WJ-HD309 no es suficiente. El manual de instrucciones siempre contiene una serie de indicaciones acerca de determinadas funcionalidades, normas de seguridad, consejos de mantenimiento (incluso qué productos usar), fallos eventuales de Panasonic WJ-HD309 y maneras de solucionar los problemas que puedan ocurrir durante su uso. Al final, en un manual se pueden encontrar los detalles de servicio técnico Panasonic en caso de que las soluciones propuestas no hayan funcionado. Actualmente gozan de éxito manuales de instrucciones en forma de animaciones interesantes o vídeo manuales que llegan al usuario mucho mejor que en forma de un folleto. Este tipo de manual ayuda a que el usuario vea el vídeo entero sin saltarse las especificaciones y las descripciones técnicas complicadas de Panasonic WJ-HD309, como se suele hacer teniendo una versión en papel.
¿Por qué vale la pena leer los manuales de instrucciones?
Sobre todo es en ellos donde encontraremos las respuestas acerca de la construcción, las posibilidades del dispositivo Panasonic WJ-HD309, el uso de determinados accesorios y una serie de informaciones que permiten aprovechar completamente sus funciones y comodidades.
Tras una compra exitosa de un equipo o un dispositivo, vale la pena dedicar un momento para familiarizarse con cada parte del manual Panasonic WJ-HD309. Actualmente se preparan y traducen con dedicación, para que no solo sean comprensibles para los usuarios, sino que también cumplan su función básica de información y ayuda.
Índice de manuales de instrucciones
-
Página 1
Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. WJ-HD309 Model Nos. WJ-HD316 Digital Disk Recorders Operating Instructions − + TIMER ERROR ALARM RESET HDD 1 HDD 2 PULL ALARM ALARM SUSPEND OPERATE Digital Disk Recorder WJ-HD 316 M ONITO R1 MONITOR2 SHIFT DI[...]
-
Página 2
2 The serial number of this product may be found on the top and bottom of the unit. You should note the serial number of this unit in the space provided and retain this book as a permanent record of your purchase to aid identification in the event of theft. Model No. Serial No. WARNING: • To prevent fire or electric shock hazard, do not expose th[...]
-
Página 3
3 CONTENTS PREFACE .................................................................... 4 FEATURES .................................................................. 4 PRECAUTIONS ........................................................... 5 TRADEMARKS AND REGISTERED TRADEMARKS ............................................................ 6 ABOUT TH[...]
-
Página 4
4 PREF ACE The Digital Disk Recorders WJ-HD316/309 are designed for use within a surveillance system and are a combination of a hard disk recorder and a video multiplexer (16-input for the WJ-HD316, 9-input for the WJ-HD309). The digital hard disk recorder is a recording device using a hard disk drive to record camera pictures instead of using vide[...]
-
Página 5
5 PRECAUTIONS • Refer all work related to the installation of these products to qualified service personnel or system installers. • Do not operate the appliances beyond their speci- fied temperature, humidity, or power source ratings. Use the appliance at temperatures within +5 °C - +45 °C (41 °F - 113 °F) and humidity below 85 %. The input[...]
-
Página 6
6 TRADEMARKS AND REGISTERED TRADEMARKS • Adobe, Adobe logos, and Acrobat are registered trade- marks of Adobe Systems Incorporated in the U.S. and/ or other countries. • Microsoft, Windows and Windows XP are registered trademarks of Microsoft Corporation in the U.S. and/or other countries. • Other names of companies and products contained in [...]
-
Página 7
7 MAJOR OPERA TING CONTROLS AND THEIR FUNCTIONS ■ Front V iew S-VIDEO COPY 2 VIDEO OUT AUDIO OUT S-VIDEO COPY 2 VIDEO OUT AUDIO OUT [WJ-HD309] [WJ-HD316] ALARM TIMER HDD 2 ERROR HDD 1 ALARM SUSPEND ALARM RESET OPERA TE MONITOR1 MONITOR2 1 5 9 13 2 6 10/0 14 3 7 11 15 4 8 12 16 SEQ SHIFT OSD P AN/ TIL T STOP PLA Y PA USE REC - REC STOP ZOOM/ FOCUS[...]
-
Página 8
8 When the shift button is lit, these buttons work as the toggled function buttons. (The buttons available as the toggled function buttons will light green when the shift button is lit.) !1 Pan, Tilt, Latest Recorded Image Playback Button (PAN/TILT, GO TO LAST) Pans/tilts the selected camera, or plays back the latest recorded image. (Refer to pages[...]
-
Página 9
9 q Audio Input Connectors (AUDIO IN 1 - 4) These connectors, for RCA pin jacks, accept an unbal- anced –10 dBV, 10 k Ω line input audio signal supplied from an external device such as a microphone amplifi- er. w Audio Output Connector (AUDIO OUT) This connector, for an RCA standard jack, supplies an unbalanced –10 dBV, 600 Ω line output au[...]
-
Página 10
10 Please check the documentation supplied with your monitor to see if your VGA monitor supports a refresh rate of 50 Hz. If your VGA monitor does not support 50 Hz (or if you are not sure), then turn off your VGA monitor before turning on WJ-HD316/WJ-HD309 when using your television as a dis- play. o Alarm Connector (ALARM) Connect an external dev[...]
-
Página 11
11 3. Event Display When an event has occurred, an event display will be displayed. The position of an event display will be symmetrical to the position where the time is displayed. When the time is displayed at the lower left of the screen, an event dis- play will be displayed at the upper right corner of the screen. The default position of an eve[...]
-
Página 12
12 Note: When the camera title and the task bar are lay- ered in this mode, only the task bar will be dis- played. Mode 2 Displays the status on the main bar, the left bar and the right bar. Mode 3 Displays the status only on the main bar, and does not display information on the left bar and the right bar. Note: Mode 2 and Mode 3 are graphic operat[...]
-
Página 13
Time Displays time and date of the displayed image When displaying live image: Current time and date When playing recorded image: Time and date when recorded *: During summer time, an asterisk (*) will be dis- played on the left side of the displayed time. 13 Delete Search Indicates that searching is currently being performed : Currently searching [...]
-
Página 14
14 t Error Display Area Indicated Item Status Indication Error Warning Indicates an error occurrence or warning ALT-*: Alteration is detected W-ERROR: Failed to write data on the HDD SMART: Warning of the HDD malfunction H-METER: Set time for hour-meter (active time of the HDD) warning has passed THERMAL: The temperature inside the unit is too high[...]
-
Página 15
15 Indicates the available disk space of each partition. Top: 100 % of the disk space is being used (no available disk space) Second from the top: 80 % of the disk space is being used Centre: 60 % of the disk space is being used Second from the bottom: 40 % of the disk space is being used Bottom: 20 % of the disk space is being used Note: When &quo[...]
-
Página 16
16 z Insert the power plug to an outlet (AC 220 V - 240 V, 50 Hz) Note: Make sure the power source is AC 220 V - 240 V, 50 Hz. x Turn on the power switch on the rear panel. The OPERATE indicator will light and the system check (checking the system and hard disk) will start. The startup splash image below will be displayed on moni- tor 2 and the VGA[...]
-
Página 17
17 CLOCK ADJUSTMENT It is recommended to check the clock periodically and put the clock right if it shows the wrong time. Adjust the clock when displaying a live image. z Press the SETUP/ESC button for 2 seconds or more. The SETUP MENU will be displayed on monitor 2 and the VGA monitor. x Move the cursor to "System" using the arrows butto[...]
-
Página 18
18 SHUTDOWN To shutdown the unit, do the following. When recording is being performed, press the REC button for 2 or more seconds. Recording will stop and the indica- tor on the REC button will go off. When playback is being performed, press the STOP button. Playback will stop and the indicator on the PLAY/PAUSE button will go off. Turn off the pow[...]
-
Página 19
19 When recording with higher priority than manual recording is performed, manual recording will not be performed until this recording finishes. Refer to the following about the recording mode. x Stop recording. Press the REC button down for around 2 seconds. The indicator on the button will go off and recording will stop. Notes: • The camera sel[...]
-
Página 20
20 ● Recording Time The possible recording durations on the following table are just the average values. (Refer to the important notice below the table.) Recording rate for a single camera channel (Recording without audio) Unit: Hour Recording Rate [ips] SFA SFB FQA FQB NQA NQB EXA EXB 0.1 19 000 12 700 25 400 19 000 38 100 25 400 50 800 38 100 0[...]
-
Página 21
21 Record manually using an external switch at an emergency event occurrence. For example, install an external switch at the reception counter, and start recording with it when a suspicious indi- vidual appears. Refer to a system administrator about the required settings for emergency recording. z Press the external switch. The indicator on the REC[...]
-
Página 22
22 It is possible to play recorded images without stopping recording. The playback images will be displayed on monitor 2 and the VGA monitor. z Select the camera respective to the recorded images to be played. (Go to step 2 if not neces- sary) Press the desired camera selection button. The pressed camera selection button will light green or blue an[...]
-
Página 23
23 Fast forward/Fast reverse Rotating the shuttle ring will change the playback speed (1/2x, 1x, 2x, 5x, 10x, 20x) according to rotated degree. When the shuttle ring is held in the 20x position (rotated to the end) for 5 seconds, the play- back speed will be 50x. When the shuttle ring is held 5 more seconds after the playback speed became 50x, the [...]
-
Página 24
24 Marking It is possible to play from a marked point. Do the following to mark a desired point. 1. Press the SHIFT button. The SHIFT indicator will light. 2. Press the camera selection button 12 (9 for the WJ-HD309) (MARK) at a desired point to be marked during playback. Up to 100 points can be marked. When more than 100 points are marked, the old[...]
-
Página 25
25 Images from a camera will be recorded on the built-in hard disk or external recording devices (DVD-RAM drive, DVD-R drive or CD-R drive) connected to this unit. Available disk areas are as follows. Note: External recording devices can be used as a copy area for images recorded on the hard disk. It is impos- sible to record images on the external[...]
-
Página 26
26 c Select a disk to be played using the jog dial and move the cursor to "OK" using the arrows button. Press the SET button to determine the selection. The recording event list window will be displayed. (Refer to page 28 for further information.) To close the DISK SELECT window, move the cursor to select "CANCEL" and press the [...]
-
Página 27
27 It is possible to play recorded images from a designated time and date without stopping recording. Playback images will be displayed on monitor 2 and the VGA monitor. z Press the SEARCH button repeatedly until the time and date designation window is dis- played. The time and date designation window will be displayed on monitor 2 and the VGA moni[...]
-
Página 28
28 There are 3 ways to search for a recorded image and play it. • Search for a recording event and play it (Recording event search) • Search for a motion detected time and date from the recorded images and play it (VMD search) • Search for a marked point and play it (Marking search) Note: Playback images will be displayed on a single screen o[...]
-
Página 29
29 Search filter buttons: Selects the search filter Filter cancel button: Cancels the selected search filter and lists all recording events Time and date: <When searched by recording event> The time when recording started will be displayed. <When searched by VMD> The time when motion was detected will be displayed. <When searched by [...]
-
Página 30
30 z Press the SEARCH button repeatedly until the recording event list window is displayed. The recording event list window will be displayed on moni- tor 2 and the VGA monitor. Use the arrows button ( CD ) to switch between displaying the list window and the thumbnail window alternately. To search using a search filter, go to step 4. R 2 R 1 LOGOU[...]
-
Página 31
31 c Filter recording events. Filter recording events by time and date Move the cursor using the arrows button and rotate the jog dial to enter the time and date. Press the SET button to determine the entered time and date. The recording event in the entered time range will be listed and displayed. Filter recording events by camera channel Select c[...]
-
Página 32
32 <Thumbnail window> n To stop playback, press the STOP button. The indicator on the PLAY/PAUSE button will go off and playback will be stopped. Live images will be displayed on monitor 2 and the VGA monitor. Important: In the recording event list, the start time of recording will be displayed. When events occurred successively, the contents[...]
-
Página 33
33 x Press the SET button. The VMD search window will be displayed. Enter a camera channel number and time range on the VMD search window for the VMD search. To search using the same conditions as the previous search, press the PLAY/PAUSE button. Go to step 12 when the VMD search is performed and a list of the results is displayed after the PLAY/PA[...]
-
Página 34
34 ⁄0 Select the sensitivity using the arrows button ( DC ) from the following. OFF: Motion will not be detected LOW: Low sensitivity MID: Standard sensitivity HIGH: High sensitivity ⁄1 Rotate the jog dial to select "EXIT" on the sta- tus bar to exit from the motion detection area setup window. m Move the cross cursor using the arrows[...]
-
Página 35
35 ⁄2 Move the cursor to select a detection mode using the arrow buttons and rotate the jog dial to check the radio button next to the selected detection mode. Press the SET button to deter- mine the selection. Refer to page 36 for further information about each of the detection modes. <ANY AREA mode> Move the cursor to the parameter box us[...]
-
Página 36
36 Any motion will be detected anywhere in the A, B, C, D areas. Note: In the ANY AREA mode, it is possible to set the masking duration. When the masking duration is set, motion will be ignored for a certain period (set duration as the masking duration) in the same area. It is conve- nient to set the masking duration to make the subject period shor[...]
-
Página 37
37 ■ Search for a marked point and play from that point (Marking search) Display the recording time of the recorded images with a marked point in a list or a thumbnail and select the desired recording time to play. Refer to page 24 for further informa- tion about marking. z Press the SEARCH button repeatedly until the marking list window is displ[...]
-
Página 38
38 MONIT OR LIVE IMAGES It is possible to display live images on a single screen or a multi-screen. On a single sequential display (It is also possible that dis- played images from cameras will be switched automatical- ly) ■ Displaying Live Images on a Single Screen z Press the MONITOR1/MONITOR2 button to select the monitor. When monitor 1 is sel[...]
-
Página 39
39 ■ Displaying on a Multi-screen It is possible to display images on a multi-screen (4, 7, 9, 10, 13, 16 for the WJ-HD316, 4, 7, 9 for the WJ-HD309). z Press the MONITOR1/MONITOR2 button to select the monitor. When monitor 1 is selected, the indicator will light. When monitor 2 is selected, the indicator will not light. x Press the SHIFT button.[...]
-
Página 40
40 ■ Sequential Display Displayed images from cameras will be switched automati- cally. Camera images will be displayed sequentially according to the settings performed in advance. z Press the MONITOR1/MONITOR2 button to select the monitor. When monitor 1 is selected, the indicator will light. When monitor 2 is selected, the indicator will not li[...]
-
Página 41
41 CONTROL CAMERAS When displaying live images, the following camera controls are possible. • Panning/tilting: Moves a camera horizontally/vertically. • Zooming: Zooms in/out on images. • Focus: Adjusts the focus. • Iris: Adjusts the iris of the lens. • Preset action: Moves a camera to the preset position registered in advance. • Auto f[...]
-
Página 42
42 x Use the arrows button ( AB ) to adjust the focus. Press the arrows button ( A ) to shift the focus farther. Press the arrows button ( B ) to shift the focus nearer. Auto focus is available by pressing the SET button. c Press the camera selection button ([1] - [16] for the WJ-HD316, [1] - [9] for the WJ-HD309) respective to the controlled camer[...]
-
Página 43
43 ■ Move a camera to the preset position z Press the PRESET/AUTO button. The PRESET/AUTO indicator will light and the PRESET/ AUTO PAN window will be displayed. x Press a camera selection button ([1] - [10/0] for the WJ-HD316, [1] - [9], [0] for the WJ-HD309) to select a desired preset posi- tion. Pressing the camera selection button [10/0] ([0][...]
-
Página 44
44 Note: To move the camera to another registered preset position, press the SET button after selecting a desired preset position number in step 2. The PRESET/AUTO PAN window will not close and it is possible to select another preset number. ■ Auto Function (Auto Pan, etc) Moves a camera with an auto function set in advance. Important: When monit[...]
-
Página 45
45 ABOUT THE EVENT FUNCTION The event action will be performed when the following events occur. • Motion detection: When motion is detected by the motion detection function (see below), this is stated as an event of motion detection. • Video Loss: When a video signal supply is stopped because of a cable disconnection or malfunction of a camera,[...]
-
Página 46
46 ■ Alarm Function ● Blinks the ALARM indicator on the front panel ● Switches from the images displayed on monitor 1 and monitor 2 to the images from the location of the alarm occurrence (on a single screen) ● Displays the event information in the alarm display area on monitor 1 and the camera title display area on monitor 2 <Monitor 1&[...]
-
Página 47
47 ■ Cancel the Alarm Action When an alarm has occurred, this unit will start the alarm action according to the selected alarm action mode. To cancel the alarm action, press the ALARM RESET but- ton. When "ON" is selected for "Alarm Auto Reset" (on the "Alarm Setup" menu of "Event"), the following will be p[...]
-
Página 48
48 It is possible to copy (duplicate) manually the images recorded on the disk area selected with the DISK SELECT window (page 25 ) to the HDD copy area or the external recording device (DVD-RAM disk, DVD-R disk, CD-R disk) connected to the unit. It is recommended to make back-up copies on a regular basis for unexpected situations such as malfuncti[...]
-
Página 49
49 v Select the "OK" button using the arrows button and press the SET button. The DATA COPY window will be closed and data copy will start. The copy icon will be displayed on the task bar during copying. To close the DATA COPY window, select "CANCEL" using the arrows button and press the SET button. The setting will be canceled [...]
-
Página 50
50 Perform the settings for the built-in hard disk of the unit, the optional extension unit and the DVD-RAM disk. These are the descriptions of how to delete recorded images on the hard disk and how to format a DVD-RAM disk. Refer to a system administrator for further information about the other disks. ■ Deletion of recorded images saved on the h[...]
-
Página 51
51 b Move the cursor to "Manual Delete for Normal Recording Area" or "Manual Delete for Event Recording Area" using the arrows button, and set time and date using the jog dial. The images recorded the day before the set time and date will be subject to be deleted. n Move the cursor to "DELETE" using the arrows button a[...]
-
Página 52
52 FORMA T (INITIALIZE) A DVD-RAM DISK To copy (duplicate) recorded images onto the DVD-RAM disk, formatting (initializing) the DVD-RAM disk is required in advance. To delete images recorded on the DVD-RAM disk, format- ting (initialization) of the DVD-RAM disk is also required. Important: All data on the disk will be deleted if formatted (initial-[...]
-
Página 53
53 n Press the SET button to select "FORMAT". The confirmation dialog window will be displayed. m Move the cursor to "OK" using the arrows but- ton and press the SET button to start format- ting. To stop formatting, select "CANCEL" and press the SET but- ton. During formatting, the status window will be displayed. The [...]
-
Página 54
54 DISPLA Y/EDIT TEXT INFORMA TION It is possible to attach text information to images when recording. Entering 20 characters for a line (up to 10 lines, with a total of 200 characters) is possible. These are the descriptions of how to display/edit the attached text information for images. Note: Displaying/editing text information is possible durin[...]
-
Página 55
55 b Edit text information using the arrows button and the jog dial. • To insert a character Move the cursor to a desired point where a character is to be inserted using the arrows button, and select a character using the jog dial. • To delete a character Move the cursor to a character to be deleted using the arrows button, and press the STOP b[...]
-
Página 56
Indication 56 H-METER Press the ALARM RESET button to can- cel the warning status. The unit will be in the error half-reset/error reset condition. Contact the dealer to replace the hard disk. Warning The set time for the HOUR METER has passed. (Refer to page 94 .) It may be reaching the end of the hard disk’s lifetime. W-ERROR SMART ALT-* ERROR/W[...]
-
Página 57
POWER Warning The power outage alert signal is sup- plied from the uninterruptible power sup- ply system (UPS). Internal processing will start when the set time for "Shutdown Time" on the "Basic Setup" menu of "System" has passed after having received the power outage alert signal. (Refer to page 122.) When the interna[...]
-
Página 58
58 Item WV-CU360C Note Open/Close the SETUP MENU WJ-HD316/WJ-HD309 Press the [5] button to display the search filter window. Press the SET button to start playback. Press the [5] button to display the VMD search list. Press the SET button to start playback. Press the button [0] to delete a character in the SETUP MENU. Press the SET button to start [...]
-
Página 59
59 PLA Y P AUSE REV – + FWD Rotate the shut- tle ring Rotate the shut- tle ring REV – + FWD Rotate the shut- tle ring Rotate the shut- tle ring Rotate the shut- tle ring Rotate the shut- tle ring Rotate the shut- tle ring Rotate the shut- tle ring REV – + FWD REV – + FWD REV – + FWD REV – + FWD REV – + FWD REV – + FWD REV – + FWD [...]
-
Página 60
60 Available only during pause Skip to the next frame Available only during pause Skip to the previous frame The point to be skipped to will be different between normal playback and filtered play- back. Skip forward The point to be skipped to will be different between normal playback and filtered play- back. Skip backward Available only during play[...]
-
Página 61
61 It is possible to stop the sequential display by pressing a camera selection button. It is possible to stop the sequential display by pressing a camera selection button. Sequential display ON (For the WJ-HD316) Sequential display ON (For the WJ-HD309) SEQUENCE SEQUENCE SEQ 7 SHIFT + SEQ 4 SHIFT + Switches in the following order each time the but[...]
-
Página 62
62 OPERA TION USING A PC It is possible to perform the settings or operate the unit using a web browser installed on a PC when this unit is connected to a network. The available features and the system requirements of a PC are as follows. Refer to the Network Operating Instructions (PDF) on the provided CD-ROM. ■ Features It is possible to operat[...]
-
Página 63
63 OPERA TION OF THE UNIT IN THE CASCADE CONNECTION When connecting multiple units (up to 4 units) in the cascade connection, it is possible to monitor images from all of the WJ- HD316/309 in the cascade connection using a monitor. It is necessary in advance to perform the settings to operate the unit in the cascade connection. Refer to a system ad[...]
-
Página 64
64 1. Remove the rubber legs (6 pcs.) on the bottom of the unit. • Use a flat-blade screwdriver and remove the screws. 2. Install the rack mounting brackets on both sides of the unit. • Using the mounting screws (4 pcs.) for the rack mount- ing brackets, fix them firmly. 3. Install the unit in the rack. • Fix the unit firmly with the rack mou[...]
-
Página 65
Item 65 MANAGEMENT OF USERS/HOSTS It is necessary in advance to register users and PCs (hosts) who access this unit via a network such as a LAN. Up to 32 users and 8 hosts can be registered. The following information can be registered as user information and host information. For the set items above, the unit will work differently depending on whet[...]
-
Página 66
66 Notes: • When a user is operating this unit using a PS·Data compatible controller, this user can log in automatically as a PSD user set for "PSD User" of "System" on the SETUP MENU. • When a user logged into this unit using a PS·Data compatible controller and didn’t operate the unit for around 2 minutes, this PSD user[...]
-
Página 67
67 OPERA TING THE UNIT FOR THE FIRST TIME Important: When connecting an optional extension unit (the WJ- HDE300 series), turn on the power of the extension unit before turning on the power of this unit. z Turn on the POWER switch. x Press the SET button when the system check complete window is displayed. The HDD DISK MENU window will be displayed. [...]
-
Página 68
68 Preparation for maintenance (HDD replacement, installation, etc.) When maintaining (HDD replacement, installation, etc.) without turning the power of the unit off, carry out the follow- ing operation after setting the HDD SAFETY MODE to ON. (The default setting is ON.) This can be set on the "Disk Info" menu of "Maintenance".[...]
-
Página 69
69 When the system check has been completed, the HDD SAFETY MODE window (as shown below) will be displayed. The camera selection buttons on the front panel (1 - 16 for the WJ-HD316, 1 - 9, 0 for the WJ-HD309) will light green and orange (for 2 seconds each) alternately. Move the cursor to OFF using the arrows button and press the SET button. The un[...]
-
Página 70
70 Important When connecting the Panasonic matrix switcher or the data multiplex unit to this unit, the looped through output signal for every video input signal from them must be supplied to the video input connectors of this unit directly. Do not supply the monitor output signal or the spot output signal from the matrix switcher or the data multi[...]
-
Página 71
71 ■ Connections with an extension unit An example of connections is shown below when the unit is used together with an optional extension unit. This unit can be connected with up to seven extension units. Connect the EXT IN port on the rear panel of the extension unit and the EXT STORAGE port on the rear panel of this unit using the cable provid[...]
-
Página 72
72 ■ Connections with DVD-RAM, CD-R, and DVD-R drives This is an example of connection when the unit is used together with the designated DVD-RAM, DVD-R and CD-R drive. Connect the designated DVD-RAM, DVD-R and CD-R drive and the COPY1 port on the rear panel or the COPY2 port inside the connectors cover on the front panel of this unit using an US[...]
-
Página 73
73 ■ Connections with the VTR When it is necessary to copy the recorded images to a video tape using a VTR, connect the VTR to the S-VIDEO connector (or the VIDEO OUT connector) and the AUDIO OUT connector inside the connectors cover on the front panel of this unit as below. Note: The same video signal supplied to the MONITOR1 connector and to th[...]
-
Página 74
74 ■ Connections with PS · Data systems This is an example of connection when the unit is used together with the PS · Data devices. If a connected system controller is PS · Data compatible, it is possible to operate this unit or connected devices using the sys- tem controller. Use the RS485 cable provided with the system controller. Important:[...]
-
Página 75
75 ● When installing this unit between a controller and a system device ● When connecting this unit with a system device (No. 7: OFF) (No. 8: OFF) POWER ON OFF ALARM Data Multiplex Unit WJ-MP204 ALARM SUSPEND 1234 ESC SET RESET SUSPEND SET UP ALARM UNIT 0 9 8 7 6 5 4 3 2 1 System Controller Controller T er mination: ON Unit Address : 1 RS485 ca[...]
-
Página 76
76 ■ Cascade connection of multiple units Up to of four units can be connected. For the cascade connection, connect the CASCADE IN connector and the CASCADE OUT connector on the rear panel of each unit as below. Important: • When connecting the unit in the cascade connection, set "Cascade" of "PS · Data Setup" in "Comm[...]
-
Página 77
77 ● When the PS · Data compatible device is connected to the first unit 1 2 IN OUT CASCADE OUT 16 16 3 15 15 14 14 13 2 1 13 12 12 11 11 10 10 9 9 8 8 7 7 6 6 5 5 4 4 3 3 2 2 1 1 VIDEO AUDIO IN AUDIO OUT MONITOR OUT CASCADE IN MONITOR (V GA) ALARM/CONTOR OL SERIAL ALARM POWER COPY 1 MODE EXT STORAGE 10/100BASE-T RS485(CAMERA) D ATA AC IN SIGNAL[...]
-
Página 78
78 ● When the PS · Data compatible device is connected to the third unit 1 2 IN OUT CASCADE OUT 16 16 3 15 15 14 14 13 2 1 13 12 12 11 11 10 10 9 9 8 8 7 7 6 6 5 5 4 4 3 3 2 2 1 1 VIDEO AUDIO IN AUDIO OUT MONITOR OUT CASCADE IN MONITOR (V GA) ALARM/CONTOR OL SERIAL ALARM POWER COPY 1 MODE EXT STORAGE 10/100BASE-T RS485(CAMERA) DA TA AC IN SIGNAL[...]
-
Página 79
79 ● When the PS · Data compatible devices are connected to the first and third units 1 2 IN OUT CASCADE OUT 16 16 3 15 15 14 14 13 2 1 13 12 12 11 11 10 10 9 9 8 8 7 7 6 6 5 5 4 4 3 3 2 2 1 1 VIDEO AUDIO IN AUDIO OUT MONITOR OUT CASCADE IN MONITOR (V GA) ALARM/CONTOR OL SERIAL ALARM POWER COPY 1 MODE EXT STORAGE 10/100BASE-T RS485(CAMERA) DA TA[...]
-
Página 80
80 ■ Connection with the RS485 camera This is an example of connection when the unit is used together with the RS485 devices. Up to eight cameras can be connected using a single RS485 (CAMERA) port. Important: • Terminate both devices on both ends of the connection. Refer to the respective operating instructions for the descriptions of how to t[...]
-
Página 81
81 ● Daisy connection Multiple cameras can be connected to the RS485 (CAMERA) port. Example: When cameras 1 - 4 are connected to one of the RS485 (CAMERA) port and cameras 9 - 12 are connected to the other RS485 (CAMERA) port. 1 2 IN OUT CASCADE OUT 16 16 3 15 15 14 14 13 2 1 13 12 12 11 11 10 10 9 9 8 8 7 7 6 6 5 5 4 4 3 3 2 2 1 1 VIDEO AUDIO IN[...]
-
Página 82
82 ■ Mode Switch RS485 interface is used to communicate between this unit and the PS · Data compatible system device. In this case, it is neces- sary to terminate both devices on both ends of the RS485 connection. The settings of the mode switch will be different depending on whether this unit is used as a receiver or a controller. When an RS 48[...]
-
Página 83
83 ■ How to Use the T erminals of the ALARM/CONTROL Connector These terminals are used for emergency recording, auto time adjustment (Auto Adjust Time), taking measures against power outages (Shutdown Time), and when installing a buzzer, a lamp, or similar alarm device. They are also used to synchronize with the sequential display changeover. The[...]
-
Página 84
84 ● Connection for emergency recording When the external switch is turned ON, emergency recording will be started. Resolution, recording time, recording rate and quality for emergency recording can differ according to the settings of "Emergency REC" of "Recording" on the SETUP MENU. (Refer to page 99 .) ● Connection for ext[...]
-
Página 85
85 ● Connection for the Auto Adjust Time function • When "Auto Adjust T ime" of "System" on the SETUP MENU is set to "MASTER" "Time Adjust Output" becomes available and the clock of this unit can be applied to other units. • When "Auto Adjust T ime" of "System" on the SETUP MENU is s[...]
-
Página 86
86 ● Connection with the Uninterruptible Power System (UPS) This is an example of connection with the uninterruptible power system (UPS) to be installed to protect from a power outage. When a signal is supplied to the outage detection I/O terminals from the uninterruptible power system (UPS), internal process- ing (stops recording safely) will be[...]
-
Página 87
87 ■ How to Use the T erminals of the ALARM Connector These terminals are used to connect the alarm devices, such as sensors, door switches, etc. The pin configurations of these terminals are as shown below. The connector used should be compatible with the pin configu- ration. Pin Configuration The pin array is different from other disk recorders[...]
-
Página 88
88 ● Alarm connection When a signal is supplied to the alarm input terminals of CH 1-16, recording and displaying of camera images will be per- formed according to the settings. When an alarm device such as a buzzer, a lamp, etc., is installed outside, connect them to the alarm output terminals (pin nos. 9 - 12, pin nos. 23 - 25) or to the alarm [...]
-
Página 89
89 ■ How to Use the SERIAL Connector This connector is compliant with the RS232C Standard, and is used to communicate with a connected PC. A connection example and the pin configuration of the SERIAL connector are as shown below. Important: • When using the SERIAL connector, it is necessary to perform the settings with "RS232C Setup" [...]
-
Página 90
90 SETUP To operate this unit, it is necessary to set each item of the SETUP MENU in advance. Perform the settings for each item of the SETUP MENU by displaying the SETUP MENU on monitor 2. Settings items are as below. ■ Item list of the SETUP MENU Maintenance REC Rate Display the recording rate for each recording mode and image quality for each [...]
-
Página 91
91 Switcher Monitor1 Perform the settings for the image switching on monitor 1 such as the setting of the sequential display or the screen to be displayed at login on monitor 1. Monitor 2 Perform the settings for the image switching on monitor 2 such as the setting of the sequential display or the screen to be displayed at login on monitor 2. Displ[...]
-
Página 92
92 Main menu: These menus are always displayed on the SETUP MENU. Live image: Live images from the camera channel that was selected just before the SETUP MENU was displayed. Main area: The setting items of the selected submenu will be displayed in this area. Submenu: The submenu of the selected main menu will be displayed on the left side of the SE[...]
-
Página 93
93 z Press the SETUP/ESC button for 2 seconds or more when displaying live images. [Screenshot 1] The top page of the SETUP MENU will be displayed. x Select a main menu using the arrows button and press the SET button. [Screenshot 2] The submenu of the selected main menu will be displayed. c Select the submenu using the arrows button ( CD ) and the[...]
-
Página 94
94 Perform the settings for the hard disk drives. It is possible to check the histories (log) of event occur- rence, error occurrence and access. ● [REC Rate] Check the recording rate and the image quality for each camera channel. The recording rate for each recording mode for each cam- era (as shown below) will be displayed in list form. MANU: M[...]
-
Página 95
95 ● [Disk End Mode] Set actions to be taken when the available hard disk space has run out Select an action from the following to be taken when the available space of the built-in hard disk (normal recording area, event recording area, copy area) or the external recording device (DVD-RAM, CD-R or DVD-R disk drive) connected to the copy port (COP[...]
-
Página 96
96 ● [Event Log] Check the event log The event log (time and date at an event occurrence, details) will be displayed in list form. Refer to page 45 for further information about each event. COM: Command alarm EMR: Emergency recording LOSS: Video loss TRM: Terminal alarm VMD: Motion detection Note: Up to 750 event logs can be kept. When more than [...]
-
Página 97
97 SMART X-Y X indicates the unit/unit number that has the hard disk error Y indicates the unit/unit number HDD SMART error ● [Access Log] Check the access log The time, user name and IP addresses when logging in/out to/from this unit will be displayed in list form. **IN: The user name or the IP address displayed before IN indicates the user/host[...]
-
Página 98
98 Perform the settings for the basic recording (REC Setup) and the emergency recording. ● [REC Setup] Perform the settings for the basic recording. Perform the following settings for the basic recording. 8 Recording Select ON or OFF to record or not record. ON: Recording will be performed. OFF: No recording will be performed. Important: When OFF[...]
-
Página 99
99 Important: • When a live image from the audio assigned camera channel is displayed on a single screen on monitor 2, audio will be heard. When displaying on a multi-screen, audio will not be heard. • When images from the audio assigned camera channel are displayed on a single screen, recorded audio will be heard. When displaying on a multi-sc[...]
-
Página 100
100 Perform the settings for event actions of each event type (motion detection, video loss, command alarm and terminal alarm). ● [Event Setup] Settings for the alarm output duration and the buzzer duration Perform the settings for the alarm output duration and the buzzer sound duration for each event type (motion detec- tion, video loss, command[...]
-
Página 101
101 [Screenshot 2] The "VMD Setup" window will be displayed. x Rotate the jog dial to select "SETUP AREA" on the status bar. Note: To set all areas on the monitor as the motion detection area, select "ALL AREAS" and press the SET button. [Screenshot 3] The cross cursor will be displayed on the "VMD Setup" win[...]
-
Página 102
102 x Move the cross cursor onto an area to be deleted using the arrows button and press the SET button. c To complete the settings, rotate the jog dial to select "EXIT" on the status bar. → The "VMD Setup" window will be closed. 8 Set the sensitivity Set the sensitivity for the created motion detection area. Sensitivity can b[...]
-
Página 103
103 <DURATION> Move the cursor to the parameter box of each area using the arrows button ( B ) and select a moving dura- tion for an object in each area from the following using the arrows button ( CD ). --/5 s/10 s/20 s/30 s/40 s/50 s/1 m c To complete the settings, rotate the jog dial to select "EXIT" on the status bar, and press [...]
-
Página 104
104 8 Alarm Disarm Time The following are possible for the alarm disarm. 2 s - 10 s (in 1 second intervals) ● [T erminal Setup] Perform the settings for the alarm terminal polarity . Select how to supply the signal to the alarm terminal. N.O.: Signals will be supplied when short-circuited. (Normally Open) N.C.: Signals will be supplied when open-[...]
-
Página 105
105 Perform the settings for the recording schedules of record- ing and event action by designating a day of the week and time. A day can be divided into up to 6 time zones, and record- ing programs and event action programs can be assigned to each time zone to create a recording schedule. Up to 4 normal recording programs (REC Program) and up to 4[...]
-
Página 106
106 8 Recording Rate and Image Quality for Each Camera Channel Perform the settings for recording rate, image quality and recording duration for each camera channel (only for pre- event recording and post-event recording). Perform the settings for each recording mode. Assign the recording rate for each camera channel as described in "Recording[...]
-
Página 107
107 • When a pre-recording area is created in an optional extension unit (WJ-HDE300 series), it is possible to per- form pre-event recording for up to 60 minutes accord- ing to the resolution, recording rate and disk space for pre-event recording. Refer to page 135 for descriptions of how to create the pre-recording area. Pre-event recording for [...]
-
Página 108
108 8 Terminal/command alarm Perform the settings of an event action at a terminal/com- mand alarm occurrence or the settings of the auto copy function. The contents to be set are the same as the settings for "VMD" above. ● [Time T able] Assignment of REC Program and Event Program after setting the time zone Create recording timetables [...]
-
Página 109
109 n Select OK using the arrows button and press the SET button. Notes: • The start time and end time can be set in 15 min- utes intervals. • To copy a timetable that is set for a different day of the week, select "Copy the Other Time Table" and select a day of the week by rotating the jog dial in step 3. Then, move the cursor to the[...]
-
Página 110
110 Perform the settings for image switching such as the sequential display setting or the waiting screen (while log- ging out) setting for displaying on monitors 1 and 2. ● [Monitor 1] Switcher function of monitor 1 Perform the settings for the switcher function of monitor 1. 8 Live Sequence Perform the settings for the sequential display of liv[...]
-
Página 111
111 [Screenshot 4] The cursor moves to the "PRESET" in "STEP 1". b Rotate the jog dial to select a preset position number for which image is displayed in "STEP 1" from the follow- ing. 1 - 64: Moves to the selected preset number. --: Does not move to the preset position. n Select "DWELL" in "STEP 1"[...]
-
Página 112
112 ● [Monitor 2] Switcher function of monitor 2 Perform the settings for the switcher function of monitor 2. 8 Live Sequence The settings for "Live Sequence" are the same as for "Monitor1". Refer to page 110 for further information. 8 Sequence Timing The settings for "Sequence Timing" are the same as for "Monit[...]
-
Página 113
113 Perform the display settings for monitors 1 and 2 connected to the unit. ● OSD Setup Perform the On Screen Display settings for monitor 1 and monitor 2 such as the settings of camera titles or the set- tings of the time display position. 8 Camera Title Perform the settings for the camera title. It is possible to display a camera title on the [...]
-
Página 114
114 3. Move the cursor to "OK" using the arrows button and press the SET button. The camera title will be copied. • The following characters can be entered for a cam- era title: 0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z a b c d e f g h i j k l m n o p q r s t u v w x y z À Ä Â Æ Ç É Ì Ñ Ò Ö Ù Ü [...]
-
Página 115
115 8 Camera Title Display Select ON and OFF whether or not to display the camera title. ON: Displays the camera title. OFF: Does not function. 8 Alarm Display Select ON and OFF whether or not to activate the alarm dis- play at an event occurrence. ON: Displays the alarm display at an event occurrence. OFF: Does not function. ● [Monitor2] Setting[...]
-
Página 116
116 It is necessary to adjust the communication speed and use the same communication protocol with external devices such as a controller when connecting those external devices to the DATA port or the SERIAL connector (RS232C). It is also necessary to perform the settings for the network such as the IP address and the gateway address when operating [...]
-
Página 117
117 8 Baud Rate Select the communication speed for data transmission with a connected device from the following. 2 400/4 800/9 600/19 200/38 400 bps 8 Data Bit It is impossible to change the value for this setting. 8 bit 8 Parity Select a method to check a transmission error at communi- cation from the following. NONE: No parity check EVEN: Even pa[...]
-
Página 118
118 8 Baud Rate Select the communication speed for data transmission with a connected device from the following. 4 800/9 600/19 200 bps 8 Control Camera CH It is possible to assign camera channels to the RS485 ports 1 and 2 as shown below. [Screenshot 1] Start operation from the "RS485 Setup" menu. z Move the cursor to "Control Camer[...]
-
Página 119
119 8 Data Bit Select a data length for communication from the following. 7/8 bit 8 Parity Select a method to check a transmission error at communi- cation from the following. NONE: No parity check EVEN: Even parity ODD: Odd parity 8 Stop Bit Select a stop bit from the following. 1/2 bit 8 Retry Timing Select a retransmission interval for when data[...]
-
Página 120
120 8 DNS Select "MANUAL" or "AUTO" to enable searching for an IP address by its host name using DNS. When "OFF" is select- ed for "DHCP" (no use of the DHCP server), select "MANU- AL" and enter the domain name and the DNS server address. If "ON" is selected for "DHCP" (use of th[...]
-
Página 121
121 Perform the following system settings required to operate this unit. ● [Basic Setup] Basic system settings Perform the following settings for basic operation. 8 ADMIN Password Set the password for an administrator. Enter 4-8 alphanumeric characters. The same method is used to enter, insert and delete char- acters as for attaching text informa[...]
-
Página 122
122 8 Shutdown Time Select a waiting time before starting the internal processing against the power outage after an outage detection signal has been supplied to the unit from the following. 10 s/20 s/30 s/1 m/2 m/3 m/4 m/5 m 8 Auto Copy ON or OFF whether or not to copy recorded images to the copy area on the hard disk automatically. OFF: Does not c[...]
-
Página 123
123 z Move the cursor to "Summer Time (Day Light Saving) Table" using the arrows button ( CD ) and press the SET button. [Screenshot 2] The "Summer Time (Day Light Saving) Table" will be dis- played. x Move the cursor to enter the ON or OFF time (year, month, date) for summer time using the arrows button. [Screenshot 3] The curs[...]
-
Página 124
124 ● [Host Regist.] Registration of PC (host) accessible to this unit Register host information for the PC that accesses the unit via a network such as a LAN. Move the cursor to "SET" at the lower right on the menu and press the SET button to complete registration. 8 Host IP Address Enter the IP address. Move the cursor to "Host I[...]
-
Página 125
125 9SCREEN10 - 16 (only for the WJ-HD316): Displays images from camera channels 10 - 16 on a 9-split screen. 16SCREEN (only for the WJ-HD316): Displays images from camera channels 1 - 16 on a 16-split screen. SEQ: Images will be displayed in the sequential display. 8 Camera Partitioning Select a controllable range for each camera channel from the [...]
-
Página 126
126 Alarm Reset Alarm Suspend Copy Normal Recording Erase Event Recording Erase Manual REC Operation Playback Operation N/W Access An event operation can be canceled. (Refer to page 47 .) An event operation can be suppressed. (Refer to page 47 .) A recorded image can be manually copied. (Refer to page 48 .) Image data in the normal recording area o[...]
-
Página 127
127 For operating the camera connected to this unit, it is necessary to set the camera functions in advance. Setup of the camera functions can be performed on the setup menu of the connected camera. You can operate the camera setup menu by calling up it from this unit. Contents of the camera setting menu and operations vary according to the connect[...]
-
Página 128
128 DISK MANAGEMENT ■ Notes on the hard disk Camera images are recorded into the built-in hard disk of this unit. There are two hard disks in this unit. In case one of them malfunctions during recording, it is possible to keep record- ing with the other hard disk (mirror function). The internal hard disk of this unit is virtually divided into 3 a[...]
-
Página 129
129 2. Remove the cable from the front panel. 3. Remove the screws fixing the mounting unit, and then pull the hard disk drive mounting angle toward you. Only the upper and lower holes on both sides will be used when fixing by screws even though there are 3 holes each on both sides. 4. Remove the four screws fixing the upper hard disk drive. When r[...]
-
Página 130
130 When replacing the hard disk drive without turning off the power of the unit. z Close the SETUP MENU after selecting "ON" for "HDD Safety Mode" of "Disk Info" on the "Maintenance" menu. → The HDD SAFETY MODE window will be displayed. x The procedures are different between the replacement of the hard dis[...]
-
Página 131
131 160 GB: Indicates the hard disk capacity (disk existed when last started up) 160 GB M: Indicates the hard disk capacity (mirrored disk existed when last started up) ADD (160 GB): Indicates that this hard disk is newly mount- ed at this startup, but that it was not mounted last time. Those parenthesized numbers indicate the capacity of the hard [...]
-
Página 132
132 Summary of the RAID 5 function (Redundant Arrays for Independent Disks, independent data disks with distributed parity blocks) It is possible to use the RAID 5 function with an optional extension unit. RAID level 5 regards 3 or more drives as one drive, and it is possible to read data by attaching error correction data even though one of the dr[...]
-
Página 133
133 ■ Formatting (Initialization) the Hard Disk It is necessary to initialize the hard disk in the following cases. • When replacing the hard disk of this unit • When operating the unit for the first time after connect- ing the optional extension unit to this unit Important: When the hard disk is formatted (initialized), all of the recorded i[...]
-
Página 134
134 , Press the SET button after setting. [Screenshot 5] The confirmation dialog window will be displayed. . Move the cursor to "EXECUTE" using the arrows button ( A B ) and press the SET button. → Formatting will start and the format result dialog window will be displayed. The "TOP MENU" of the "HDD DISK MENU" will [...]
-
Página 135
135 [Screenshot 4] The "DISK SELECT" menu will be displayed. When using the RAID 5 function, the "UNIT SELECTION" menu will be displayed. <Screen displayed when using the RAID 5 function> m Move the cursor to a desired hard disk (unit) to be for- matted (initialized) using the arrows button and press the SET button. [Scree[...]
-
Página 136
136 [Screenshot 7] The "PRE RECORDING AREAS" menu will be displayed. ⁄0 Select the camera channel for pre-event recording using the arrows button and assign the disk space to the selected pre-recording area by rotating the jog dial. Repeat this operation to assign disk space to two or more camera channels. Press the SET button after set[...]
-
Página 137
137 Mirroring is the function that records camera images onto two hard disks simultaneously. In case one hard disk has a problem, image data will be stored on the other hard disk. The credibility of the disk can be enhanced. It is recommended to activate the mirroring function for the first use of this unit. When the mirroring function is activated[...]
-
Página 138
138 n Select a recording area using the arrows button and assign the disk space to the selected recording area by rotating the jog dial. Repeat this operation to assign disk space to two or more recording areas. m Press the SET button after setting. [Screenshot 5] The confirmation dialog window will be displayed. , Move the cursor to "EXECUTE&[...]
-
Página 139
139 Note: When the hard disk is replaced or removed, the "TOP MENU" of the "HDD DISK MENU" will be auto- matically displayed. [Screenshot 1] The "TOP MENU" of the "HDD DISK MENU" will be dis- played. x Move the cursor to "MIRROR ON" using the arrows but- ton ( A B ) and press the SET button. Note: W[...]
-
Página 140
140 [Screenshot 2] The password entry window will be displayed. c Enter the password for an administrator by rotating the jog dial. The camera selection buttons ([1] - [10/0] for the WJ- HD316, [1] - [9], [0] for the WJ-HD309) are available to enter numbers for password. The same method is used to enter, insert and delete characters as for attachin[...]
-
Página 141
141 ■ SERIAL (RS232C) Communication Protocol With the SERIAL (RS232C) interface, you can control functions of this unit by transferring the specified commands from a per- sonal computer (PC) to this unit. Notes: • This unit does not support the communication converted between the SERIAL (RS232C) and USB interface. • When controlling the unit [...]
-
Página 142
142 • When an ANSWER command is required The unit sends back the status or data, as shown in the figure. • About ACK code After receiving a command from the PC, the unit sends back the ACK code to the PC in 20 ms or less. [ACK] = Reception succeeded (ASCII code: 06H) After the ACK code has been sent back and the command processing has been comp[...]
-
Página 143
143 • Parameter error When the unit cannot properly process the received command, the unit sends back an error code to the PC. After clearing the receive buffer, the unit enters the wait state until receiving the following [STX] command. • If the unit receives another command during the response, the unit will respond to the command after proce[...]
-
Página 144
144 1 2 IN OUT CASCADE OUT 16 16 3 15 15 14 14 13 2 1 13 12 12 11 11 10 10 9 9 8 8 7 7 6 6 5 5 4 4 3 3 2 2 1 1 VIDEO AUDIO IN AUDIO OUT MONITOR OUT CASCADE IN MONITOR (VGA) ALARM/CONTOROL SERIAL ALARM POWER COPY 1 MODE EXT STORAGE 10/100BASE-T RS485(CAMERA) DATA AC IN SIGNAL GND 1 4 2 D-sub Pin 9 (Female) D-sub Pin 9 (Female) This unit PC Pin No. S[...]
-
Página 145
145 Basic Operation Item Forward a field Rewind a field Pause during playback Play Manual recording Manual recording with text Stop Skip & play forward Skip&play reversely Record No. Search and playback Time & date search and playback Record skip LISTED Playback Playback latest image A - B repeat playback Display COPY SETUP MENU Display[...]
-
Página 146
146 Item Start sequence Stop sequence Disk selection Marking Alarm Control Item Alarm input Alarm input with text Alarm reset Alarm suspension Alarm change information (LED indication) Alarm change information Setup Control Item Display SETUP MENU Transmission command (ASCII) MSU:n DCR:n1n2 TSU:yyyymmddhhnn MST:n MRM:n Response command (ASCII) MSU:[...]
-
Página 147
147 Data Control Item Copy by specifying record Copy by specifying date & time Data copy completed Cancel data copy Erase log Log data total number inquiry Log readout Record list acquisition Text acquisition Text writing Disk End Notification Item Disk end auto-notification setting Disk end auto-notification Transmission command (ASCII) MDE:n [...]
-
Página 148
148 Search Operation Item Display search editing area Display Operation Item Switch display Inquiry Item Additional disk space inquiry ID request Interface ID request Production category request Alarm information request Software version inquiry Status inquiry Transmission command (ASCII) Transmission command (ASCII) QHR:p QID QIB QIC QLD:0 QRV QSR[...]
-
Página 149
149 zqm: Monitor status: camera CH: Playback time Monitor status n=0 Live n=1 Live sequence n=2 Playback n=3 Other statuses Camera CH Playback time: yyyymmddhhnnss ztl:n Search editing area ON n=0 Search editing area OFF n=1 Recording event search list ON n=2 Recording event search thumbnail ON n=3 VMD search list ON n=4 VMD search thumbnail ON n=5[...]
-
Página 150
150 Communication Item Communication check Transmission command (ASCII) RCK Response command (ASCII) RCK Parameter (ASCII) Record information inquiry ZGP:rrrrrrrrrrrrrrrr ZGP:rrrrrrrrrrrrrrrr: ccc:q:nnnn:yyyymmdd hhnnss:nnss:t:ssssss rrrrrrrrrrrrrrrr: Record number ccc: Camera CH q: picture quality (0 (Very Fine), 1 (Fine), 2 (Normal), 3 (Extended)[...]
-
Página 151
151 FLOWCHART OF THE SETUP MENU Recording Emergency REC Recording REC Setup Maintenance REC Rate Maintenance Disk Info Maintenance V ersion info Maintenance Disk End Mode Maintenance Disk Capacity Maintenance Disk Delete Maintenance Error Log Maintenance Access Log Maintenance Event Log Event Event Setup Schedule Time T able Maintenance Monitor 1 D[...]
-
Página 152
152 P ARAMETERS AND THE DEF AUL T SETTINGS OF THE SETUP MENU These are the setting parameters and the default settings of the items on the SETUP MENU. Refer to these as reference. Maintenance Disk Info Warning for Disk Life Time 10 000 h/20 000 h/30 000 h 20 000 h HDD Safety Mode ON/OFF OFF Disk End Mode Normal Recording Area CONTINUE/STOP CONTINUE[...]
-
Página 153
153 Setup Menu Setup Item Parameter Default Setting Event Setup Buzzer OFF/1 s/2 s/...../30 s/40 s/50 s/1 m/ VMD: OFF 2 m/...../5 m/EXT Video Loss: 2 s Terminal Command Alarm: 2 s Monitor1 Action HD316: OFF/CAM1/CAM2/...../CAM16 VMD: OFF HD309: OFF/CAM1/CAM2/...../CAM9 Video Loss: Camera channel with a video loss occurrence Terminal Command Alarm: [...]
-
Página 154
154 Setup Menu Setup Item Parameter Default Setting Special Days DATE 1/1 to 12/31 -- Mode MON/TUE/WED/THU/FRI/SAT/SUN -- Switcher Monitor1 Live Sequence [Operating with the buttons of the unit] HD316: STEP1: CAM1, WJ-HD316: STEP2: CAM2, ...... STEP16: CAM16 1/2/.../16/1-4/5-8/9-12/13-16/1-9/10-16/-- HD309: STEP1: CAM1, WJ-HD309: STEP2: CAM2, .....[...]
-
Página 155
155 Setup Menu Setup Item Parameter Default Setting Monitor1 Time & Date Display ON/OFF ON Camera Title Display ON/OFF ON Alarm Display ON/OFF ON Monitor2 Display Mode MODE1/MODE2/MODE3 MODE1 T&D and Status Display UPPER/LOWER LOWER Position Camera Title Display ON/OFF ON Comm Camera Control COMP S/M/L HD316: CAM1to CAM8: S HD309: CAM1 to C[...]
-
Página 156
156 Setup Menu Setup Item Parameter Default Setting NW Setup2 User Name - - User Password - - Access Interval 10 m/30 m/1 h/6 h/24 h 1 h Host Name - HD316: HD316 HD309: HD309 Domain Name - localdomain Network SNMP COMMUNITY - public Setup CONTACT - - SYSTEM NAME - - LOCATION - - NTP Setup Time Adjustment ON/OFF OFF Time Zone GMT-12:00/GMT-11:00/...[...]
-
Página 157
157 Setup Menu Setup Item Parameter Default Setting Time & Date Date Format YY.MM.DD/MMM.DD.YY/DD.MMM.YY DD.MMM.YY Time Format 24 h/12 h 12 h Auto Adjust Time ON/OFF OFF Master Time 0:00/1:00/...../23:00 0:00 Summer Time(Day Light Saving) ON/OFF/AUTO OFF Summer Time(Day Light Saving) Table - - User Regist. User Name - - User Edit Password - - U[...]
-
Página 158
158 • Check if the power is supplied to cameras and connected devices. • Check if the power plug is properly connected to the AC outlet. • Check if the power cord is properly inserted into the power socket of the unit. • The HDD SAFETY MODE is set to ON. In this case, set the HDD SAFETY MODE to OFF. • Check if the lens covers of the camer[...]
-
Página 159
159 • Check if the HDD has any available disk space. • Check if the recording setup is set to ON. • Check the schedule settings. • Check the recording priority settings. • When the setting menu is displayed by a non-interlace signal, the setting menu may be unable to function nor- mally. Since the setting menu of the matrix switcher is di[...]
-
Página 160
160 Check item/Remedy Problem Page Alarm operations are not acti- vated. "VIDEO LOSS" appears on the monitor. "THERMAL" appears on the monitor. The clock does not keep cor- rect time. When you turn on the power of the unit, the HDD DISK MENU is displayed. • Check if alarm input signals are properly input to the ALARM or ALARM/[...]
-
Página 161
161 Check item/Remedy Problem Page The additional disk space of HDD is not displayed. The available disk space of HDD is not displayed on the right bar. Cannot establish a connection via the network. Response or Image update takes time. The power cord insulation is damaged. The power cord, plug and con- nectors get hot during use. The power cord ge[...]
-
Página 162
162 General SPECIFICA TION Power source: Power consumption Ambient operating temperature Ambient operating humidity Dimensions Weight Input/Output Video Audio Others * 1 When power is not supplied, the video output signal was not sent from the unit even if a video input signal is supplied. * 2 Non-voltage N.O. Contact, 100 mA, +5 V pull-up * 3 Open[...]
-
Página 163
163 ST ANDARD ACCESSORIES CD-ROM* ............................................................................ 1 Operating Instructions (this manual) .................................. 1 The following are for installation: Power Cord ......................................................................... 2 Rack Mounting Bracket ..................[...]
-
Página 164
Matsushita Electric Industrial Co., Ltd. Osaka, Japan http://www.panasonic.co.jp/global/ 2004 © Matsushita Electric Industrial Co., Ltd. All rights reserved. NM0104-2034 3TR001707CAA Printed in Japan[...]