Panasonic WJ-NT304 manual

Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. LINK RCV SND OPERATE Network Interface Unit WJ-NT304 Network Interface Unit Operating Instructions Model No. WJ-NT304[...]

FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CARE- FULLY. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 5 amp fuse is fitted in this plug. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5 amp and that it is approved by ASTA or BSI to BS1362. Check for[...]

3 The serial number of this product may be found on the sur- face of the unit. You should note the serial number of this unit in the space provided and retain this book as a permanent record of your purchase to aid identification in the event of theft. Model No. Serial No. NOTE: This equipment has been tested and found to com- ply with the limits f[...]

4 Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat so[...]

5 Limitation of Liability THIS PUBLICATION IS PROVIDED "AS IS" WITHOUT WAR- RANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WAR- RANTIES OF MERCHANTABILITY, FITNESS FOR ANY PAR- TICULAR PURPOSE, OR NON-INFRINGEMENT OF THE THIRD PARTY’S RIGHT. THIS PUBLICATION COULD INCLUDE TECHNICAL INAC- CURACIES[...]

6 Preface Features Network Interface Unit WJ-NT304 is designed to capture images from analog cameras and compress the images in JPEG or MPEG-4 files. By connecting to a network (LAN) or the Internet, images and audio from the camera can be monitored on a PC via a network.* 1 *1 It is necessary to configure the network settings of the PC and its net[...]

7 There are 2 sets of operating instructions for the WJ-NT304 as follows. • Installation Guide (book, these operating instructions) • Network operating instructions (PDF) The "Installation Guide" contains descriptions of how to install and connect this unit, and how perform the required network se t- tings. Refer to the "Network [...]

8 As you will use this product connected to a network, your attention is called to the following security risks. 1. Leakage or theft of information through this product 2. Use of this product for illegal operations by persons with malicious intent 3. Interference with or stoppage of this product by persons with malicious intent It is your responsib[...]

9 CONTENTS Important Safety Instructions ................................................................................................. ..................... 4 Limitation of Liability ....................................................................................................... ............................ 5 Disclaimer of Warranty .....[...]

10 Precautions • Do not block the ventilation opening or slots on the cover. To prevent the apparatus from overheating, place it at least 5 cm {2 inches} away from the wall. • Do not drop metallic parts through slots. This could permanently damage the apparatus. Turn the power off immediately and contact qualified service personnel for service.[...]

11 MPEG-4 Visual patent portfolio license This product is licensed under the MPEG-4 Visual patent portfolio license for the personal and non-commercial use of a consumer for (i) encoding video in compliance with the MPEG-4 Visual Standard ("MPEG-4 Video") and/or (ii) decoding MPEG-4 Video that was encoded by a consumer engaged in a person[...]

12 Major Operating Controls and Their Functions LINK RCV SND OPERA TE Network Interface Unit WJ-NT304 WJ-NT304 w q F ront cover e u y r t q Operation Indicator (OPERATE) This LED will light when the power is on. Important: • The LED will blink for around 2 minutes until the unit becomes ready to operate. • When the temperature is below 0 °C, i[...]

q Video input connectors 1 to 4 (VIDEO IN 1 to 4) (BNC, 75 Ω , with auto termination) These connectors accept video input signals from cam- eras or recorders. w Video output connectors 1 to 4 (VIDEO OUT 1 to 4) (BNC, loop-thru) These connectors loop thru video input signals sup- plied to VIDEO IN connectors 1 to 4. e Audio input connector (AUDIO [...]

14 Rack Mounting Remov e the rubber feet. z Remove the rubber feet (4 pcs.) on the bottom of the unit. x Install the rack mounting brackets (Option: Refer to the following.) on both sides of the unit. Using the mounting screws (4 pcs.) for the rack mounting brackets, fix them firmly. 1. When installing one unit: Model No.: WV-Q204/1S • Rack mount[...]

■ When connecting to a network using a PoE device (hub) <Required cable> LAN cable (category 5 or better, straight) ■ When connecting with a PC directly <Required cable> LAN cable (category 5 or better, cross) Important: • Use a switching hub or a router which is compliant with 10BASE-T/100BASE-TX. • Power supply is required for[...]

c Insert an SD memory card into the SD memory card slot. v Attach the cover and tighten the screw. b Close the front cover. 16 z Open the front cover. x Detach the SD memory card slot cover by loosening the screw. Insert/Remove an SD Memory Card LINK RCV SND OPERATE Network Interiace Unit WJ-NT304 Front cover LINK RCV SND OPERATE SD memory card slo[...]

17 Configure the Network Settings ■ Install the software Before installing the software, read the readme file on the provided CD-ROM first. ● Software included on the provided CD-ROM • Panasonic IP Setup Software Configure the network settings of the unit. Refer to the following for further information. • Viewer Software "Network Camer[...]

Check if the DC plug of AC adapter is properly inserted into the DC IN jack of this monitor. Check if the power cord is properly inserted into the AC adapter. • In some cases, setup menus displayed with non- interlace signals cannot be transmitted. Setup menus of matrix switcher systems use non- interlace signals, and transmission may be impossi-[...]

19 Specifications ■ Network Interface Unit Power source: 12 V DC, 1.0 A (using the supplied AC adapter) Power consumption: Approx. 12 W Ambient temperature: –10 °C to +50 °C {14 °F to 122 °F}* 1 Ambient humidity: Less than 90 % Video input connectors: NTSC model: 1 V [P-P]/75 Ω (BNC x 4), NTSC composite video signal PAL model: 1 V [P-P]/7[...]

Information on Disposal for Users of Waste Electrical & Electronic Equipment (private households) This symbol on the products and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery and recycling, please take these products to designated co[...]