Ir a la página of
manuales de instrucciones parecidos
-
Digital Camera
Panasonic DMC-FS20
120 páginas 5.17 mb -
Digital Camera
Panasonic DMC-GH1K
200 páginas 61.99 mb -
Digital Camera
Panasonic DMC-TZ1GK
63 páginas 2.89 mb -
Digital Camera
Panasonic DMC-S5
101 páginas 2.93 mb -
Digital Camera
Panasonic DMC-FZ20PP
128 páginas 8.52 mb -
Digital Camera
Panasonic NV-GS50A
64 páginas 2.85 mb -
Digital camera
Panasonic DMC FS4
28 páginas 8.58 mb -
Digital Camera
Panasonic DMC-FS3
120 páginas 5.16 mb
Buen manual de instrucciones
Las leyes obligan al vendedor a entregarle al comprador, junto con el producto, el manual de instrucciones Panasonic WV-NS202. La falta del manual o facilitar información incorrecta al consumidor constituyen una base de reclamación por no estar de acuerdo el producto con el contrato. Según la ley, está permitido adjuntar un manual de otra forma que no sea en papel, lo cual últimamente es bastante común y los fabricantes nos facilitan un manual gráfico, su versión electrónica Panasonic WV-NS202 o vídeos de instrucciones para usuarios. La condición es que tenga una forma legible y entendible.
¿Qué es un manual de instrucciones?
El nombre proviene de la palabra latina “instructio”, es decir, ordenar. Por lo tanto, en un manual Panasonic WV-NS202 se puede encontrar la descripción de las etapas de actuación. El propósito de un manual es enseñar, facilitar el encendido o el uso de un dispositivo o la realización de acciones concretas. Un manual de instrucciones también es una fuente de información acerca de un objeto o un servicio, es una pista.
Desafortunadamente pocos usuarios destinan su tiempo a leer manuales Panasonic WV-NS202, sin embargo, un buen manual nos permite, no solo conocer una cantidad de funcionalidades adicionales del dispositivo comprado, sino también evitar la mayoría de fallos.
Entonces, ¿qué debe contener el manual de instrucciones perfecto?
Sobre todo, un manual de instrucciones Panasonic WV-NS202 debe contener:
- información acerca de las especificaciones técnicas del dispositivo Panasonic WV-NS202
- nombre de fabricante y año de fabricación del dispositivo Panasonic WV-NS202
- condiciones de uso, configuración y mantenimiento del dispositivo Panasonic WV-NS202
- marcas de seguridad y certificados que confirmen su concordancia con determinadas normativas
¿Por qué no leemos los manuales de instrucciones?
Normalmente es por la falta de tiempo y seguridad acerca de las funcionalidades determinadas de los dispositivos comprados. Desafortunadamente la conexión y el encendido de Panasonic WV-NS202 no es suficiente. El manual de instrucciones siempre contiene una serie de indicaciones acerca de determinadas funcionalidades, normas de seguridad, consejos de mantenimiento (incluso qué productos usar), fallos eventuales de Panasonic WV-NS202 y maneras de solucionar los problemas que puedan ocurrir durante su uso. Al final, en un manual se pueden encontrar los detalles de servicio técnico Panasonic en caso de que las soluciones propuestas no hayan funcionado. Actualmente gozan de éxito manuales de instrucciones en forma de animaciones interesantes o vídeo manuales que llegan al usuario mucho mejor que en forma de un folleto. Este tipo de manual ayuda a que el usuario vea el vídeo entero sin saltarse las especificaciones y las descripciones técnicas complicadas de Panasonic WV-NS202, como se suele hacer teniendo una versión en papel.
¿Por qué vale la pena leer los manuales de instrucciones?
Sobre todo es en ellos donde encontraremos las respuestas acerca de la construcción, las posibilidades del dispositivo Panasonic WV-NS202, el uso de determinados accesorios y una serie de informaciones que permiten aprovechar completamente sus funciones y comodidades.
Tras una compra exitosa de un equipo o un dispositivo, vale la pena dedicar un momento para familiarizarse con cada parte del manual Panasonic WV-NS202. Actualmente se preparan y traducen con dedicación, para que no solo sean comprensibles para los usuarios, sino que también cumplan su función básica de información y ayuda.
Índice de manuales de instrucciones
-
Página 1
LOCK WV-NS202 OPEN Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. Network Camera Network Operating Instructions Model No. WV -NS202[...]
-
Página 2
2 CONTENTS Preface ....................................................................................................................... ..... 3 About these operating instructions .............................................................................. 3 Trademarks and Registered Trademarks ..................................................[...]
-
Página 3
3 Preface About these operating instructions There are 2 sets of operating instructions for the WV-NS202 as follows. • Installation Guide • Network operating instructions These network operating instructions contain descriptions of how to operate this product using a PC via a network and of how to configure the settings. Refer to the installati[...]
-
Página 4
4 Monitor Images on a PC The following are descriptions of how to monitor images from the camera on a PC. Monitor images from a single camera Notes: • When "ON" is selected for "User Authentication", the authentication window will be displayed before dis- playing live images for the user name and password entries. The default [...]
-
Página 5
5 About the "Live" page q [Setup] button (*1) Click this button to display the setup menu. The but- ton will turn green and the setup menu will be dis- played. w [Live] button Click this button to display the "Live" page. The but- ton will turn green and the "Live" page will be dis- played. e Multi-screen buttons Image[...]
-
Página 6
6 u [SD] button (manual SD recording button) (*2) This button will be displayed only when "Manual" is selected for "Save trigger" on the setup menu. ( ☞ page 22) Click this button to manually record images on the SD memory card. Refer to page 10 for descriptions of how to manually record images on the SD memo- ry card. i ZOOM [...]
-
Página 7
7 In this case, the camera will not move when the thumbnail image is clicked. (For example, when pre- set position 3 is unregistered, the thumbnail image of preset position 2 will be displayed as the thumb- nail image of preset position 3. The camera will not move when the thumbnail image of preset position 3 is clicked.) • The camera will not al[...]
-
Página 8
8 !9 Audio output button (*3) Turns on/off the audio transmission (play audio from the PC on the camera speaker). This button will be displayed only when "Audio output" or "Interactive" is selected for "Audio mode" on the setup menu. ( ☞ page 40) The button blinks while the audio transmission is being carried out. Wh[...]
-
Página 9
9 Monitor images from multiple cameras Images from multiple cameras can be displayed on a multi-screen. Images from 4 cameras (up to 16 cameras) can be displayed simultaneously. To display images on a multi-screen, it is necessary to register cameras in advance. 4 cameras can be registered as a group and up to 4 groups (16 cameras) can be registere[...]
-
Página 10
10 Record images on the SD memor y card manually Images displayed on the "Live" page can be recorded on the SD memory card manually. This button is operable only when "Manual" is selected for "Save trigger" on the setup menu. ( ☞ page 22) Images recorded on the SD memory card can be copied onto the PC. ( ☞ page 24)[...]
-
Página 11
11 Action at an Alarm Occurrence The alarm action will be performed when the following alarms occur. Alarm type Terminal alarm: When connecting an alarm device such as a sensor to the EXT I/O connector 1-3 on the rear of the camera, the alarm action (camera action at an alarm occurrence) will be performed when the connected alarm device is activate[...]
-
Página 12
12 T ransmit images onto an FTP ser ver Images can be transmitted to an FTP server. By configuring the following settings, transmission of images captured at an alarm occurrence or captured at a designated interval to an FTP server will become available. Important: • When using this function, set the user name and the password to access the FTP s[...]
-
Página 13
13 Save images on the SD memory card when images fail to transmit using the FTP periodic transmission function Images that have failed to transmit using the FTP periodic transmission can be saved automatically on the SD mem- ory card. Images saved on the SD memory card can be obtained from the [SD memory card] tab of the "Basic setup" pag[...]
-
Página 14
14 About the network security of the camera Equipped security functions The following security functions are featured in this camera. q Access restrictions by the host authentication and the user authentication It is possible to restrict users from accessing the camera by setting the host authentication and/or the user authentication to "ON&qu[...]
-
Página 15
15 Display the setup menu and configure the settings of the camera using a PC The settings of the camera can be configured on the setup menu. The setup menu is only operable by users whose access level is "1. Administrator". How to display the setup menu Step 1 Display the "Live" page. ( ☞ page 4) Step 2 Click the [Setup] butt[...]
-
Página 16
16 Step 1 Click the desired button in the frame on the left of the window to display the respective setup menu. When there are tabs at the top of the setup page dis- played in the frame on the right of the window, click the desired tab to display and configure the setting items relating to the name of the tab. Step 2 Complete each setting item disp[...]
-
Página 17
17 About the setup menu window q [Live] button Click this button to display the "Live" page. w [Basic setup] button Click this button to display the "Basic setup" page. The basic settings such as time and date and cam- era title, and the settings relating to the NTP server and the SD memory card can be configured on the "Ba[...]
-
Página 18
18 i [Network setup] button Click this button to display the "Network setup" page. The network settings and the settings relating to DDNS (Dynamic DNS), SNMP (Simple Network management Protocol) and the FTP (File Transfer Protocol) periodic transmission function can be con- figured on the "Network setup" page. Refer to page 58 f[...]
-
Página 19
19 Configure the basic settings of the camera [Basic setup] The basic settings such as time and date and camera name, and the settings relating to the NTP server and the SD memory card can be configured on the "Basic setup" page. The "Basic setup" page has 3 tabs; the [Basic] tab, the [NTP] tab and the [SD memory card] tab. Conf[...]
-
Página 20
20 • SD memory card error LED: This LED will light when the SD memory card is unavailable to save images. • Power LED: This LED will light when the power is on. [OSD Position] Select a position where time and date, camera title, pre- set ID, panning/tilting angle, zoom ratio are to be dis- played on the "Live" page. Upper left: The ab[...]
-
Página 21
21 Configure the settings relating to the NTP server [NTP] Click the [NTP] tab on the "Basic setup" page. ( ☞ page 15) The settings relating to the NTP server such as the NTP server address, port number, etc. can be configured on this page. [Time adjustment] Select the time adjustment method from the following. Time adjusted by the sele[...]
-
Página 22
22 ■ SD memory card setup [SD memory card] Select "Use" or "Not use" to determine whether or not to use the SD memory card. Default: Not use Important: • Before removing the SD memory card from the cam- era, it is necessary to select "Not use" first. • After inserting the SD memory card, it is necessary to select[...]
-
Página 23
23 Note: When "FTP error" is selected for "Save trigger", the file name entered for "File name" on the [FTP] tab of the "Network setup" page will be used for the file name of the image saved on the SD memory card. [Frame rate] Select an image save interval from the following. 0.1 fps/0.2 fps/0.33 fps/0.5 fps/[...]
-
Página 24
24 Copy images saved on the SD memory card onto the PC [SD memory card images] Click the [SD memory card] tab on the "Basic setup" page. ( ☞ page 15) The following are descriptions of how to copy images saved on the SD memory card onto the PC. It is necessary in advance to select "Allow" for "FTP access" on the [Netw[...]
-
Página 25
2 GB 1 GB 512 MB 256 MB 128 MB 64 MB Size of SD memory card 25 Size of SD memory card Approx. 32 000 pics Approx. 16 000 pics Approx. 8 000 pics Approx. 4 000 pics Approx. 2 000 pics Approx. 1 000 pics Approx. 36 000 pics Approx. 18 000 pics Approx. 9 000 pics Approx. 4 500 pics Approx. 2 250 pics Approx. 1 125 pics Approx. 38 000 pics Approx. 19 0[...]
-
Página 26
26 Configure the settings relating to images and audio [Camera setup] The settings relating to JPEG/MPEG-4 images and camera operations such as the settings of image quality, preset positions, audio, etc. can be configured on this page. The "Camera setup" page has 4 tabs; the [JPEG/MPEG-4] tab, the [Cam Function] tab, the [Image/Position][...]
-
Página 27
27 ■ MPEG-4 setup Configure the settings relating to MPEG-4 image such as "Max bit rate (per 1 client)", "Image capture size", "Image quality", etc. in this section. Refer to page 26 for further information about the settings relating to JPEG images. [MPEG-4 transmission] Select "ON" or "OFF" to d[...]
-
Página 28
28 [Unicast port1 (Image)] Enter the unicast port number (used to transmit images from the camera). Available port number: 1024 - 50000 (Only even num- bers are available.) Default: 32004 [Unicast port2 (Audio)] Enter the unicast port number (used to transmit audio from the camera). Available port number: 1024 - 50000 (Only even num- bers are avail[...]
-
Página 29
29 Configure the settings relating to the camera title and the camera operations [Cam Function] Click the [Cam Function] tab on the "Camera setup" page. ( ☞ page 15) Configure the settings relating to camera title and the camera operations on this page. [Camera title on screen] Select "ON" or "OFF" to determine wheth[...]
-
Página 30
30 [Upside-down] Select "ON (desktop)" or "OFF (ceiling)" to determine how the camera is to be installed. ON (desktop): Select this when the camera is to be installed with the dome side up. OFF (ceiling): Select this when the camera is to be installed with the dome side down. Default: OFF (ceiling) [EL-ZOOM] Select "ON"[...]
-
Página 31
31 Configure the settings relating to images and the preset positions [Image/Position] Click the [Image/Position] tab on the "Camera setup" page. ( ☞ page 15) When the [SETUP>>] button of each setting item is clicked, the detailed settings menu will be displayed in a newly opened window. The detailed settings can be configured whi[...]
-
Página 32
Configure the settings relating to image quality ("Image Adjust" setup menu) Click the [SETUP>>] button of "Image Adjust" on the [Image/Position] tab of the "Camera setup" page. ( ☞ page 31) The settings relating to image quality can be configured with the setup menu displayed in a newly displayed window. When [...]
-
Página 33
33 [White balance] Select a method of white balance adjustment from the following. White color can be adjusted by "Red Gain" and "Blue Gain". ATW1: Auto tracing white balance mode The camera will constantly check the color tempera- ture of the light source and adjust the white balance automatically. Operating color temperature r[...]
-
Página 34
34 [DNR (Digital Noise Reduction)] When this function (digital noise reduction) is active, noise may be automatically reduced under a low lumi- nance. Select an effect level "LOW" or "HIGH" for the digital noise reduction. HIGH: High DNR, afterimage remains LOW: Low DNR, reduces afterimage Default: HIGH [Chroma gain level] Adjus[...]
-
Página 35
35 Set mask areas When "OFF" is selected for "Super Dynamic 3", it is possible to compensate for backlight by masking brighter areas. Step 1 Display the setup menu of "Image Adjust". ( ☞ page 32) Step 2 Click the [START] button of "Mask area". → Borders will appear and the image displayed on the [Image/Po[...]
-
Página 36
36 Configure the settings relating to the preset positions ("Preset No." setup menu) Click the [SETUP>>] button of "Preset Position" on the [Image/Position] tab of the "Camera setup" page. ( ☞ page 31) It is possible to register, edit and delete the preset positions on this page. When the focus, brightness, zoo[...]
-
Página 37
37 [Preset ID (0-9, A-Z)] Enter the preset ID to be displayed on images. The pre- set IDs can be applied to each preset position. Available characters: 0-9, A-Z and the following marks. !"#$%& ‘ ()*+,-./:; =? Number of characters for the preset ID: 0 - 16 char- acters Default: None (blank) Note: The entered preset ID will be displayed ne[...]
-
Página 38
38 Configure the settings relating to the auto pan function ("Auto Pan" setup menu) Click the [SETUP>>] button of "Auto Pan" on the [Image/Position] tab of the "Camera setup" page. ( ☞ page 31) The settings relating to the auto pan function can be configured with the setup menu displayed in a newly displayed wi[...]
-
Página 39
39 Configure the settings relating to the privacy zone ("Privacy Zone" setup menu) Click the [SETUP>>] button of "Privacy Zone" on the [Image/Position] tab of the "Camera setup" page. ( ☞ page 31) When there is a zone that is not to be displayed, set the zone as a privacy zone to not to display. Up to 8 privacy[...]
-
Página 40
40 ZOOM buttons FOCUS buttons BRIGHTNESS buttons Control pad/buttons Refer to pages 6 and 7 for descriptions of how to oper- ate these buttons/pad. [CLOSE] button Click this button to close the "Privacy zone" setup menu. Configure the settings relating to audio [Audio] Click the [Audio] tab on the "Camera setup" page. ( ☞ page[...]
-
Página 41
41 [Audio output volume (PC to Camera)] Select a volume level on the camera to hear audio transmitted from the PC. Low/Middle/High Default: Middle [Audio output interval (PC to Camera)] Select an interval for audio transmission from the follow- ing. 160 msec/320 msec/640 msec/1 280 msec Default: 640 msec Notes: • When a shorter interval is select[...]
-
Página 42
42 Configures the multi-screen settings [Multi-screen setup] The cameras to be used for the multi-screen display can be registered on this page. Refer to page 9 for descriptions of how to display images on a multi-screen. The following cameras are applicable for the multi-screen display. (As of October, 2006) WV-NS202, WV-NP240 series, WV-NP1000 se[...]
-
Página 43
43 Configure the alarm settings [Alarm setup] The settings relating to alarm occurrences such as settings for the alarm action at an alarm occurrence, the alarm occurrence notification, and the VMD area settings can be configured on this page. The "Alarm setup" page has 3 tabs; the [Alarm] tab, the [VMD area] tab and the [Notification] ta[...]
-
Página 44
44 Configure the settings relating to the camera action at an alarm occurrence Click the [Alarm] tab on the "Alarm setup" page. ( ☞ page 15) ■ Camera motion on alarm The settings relating to the camera action at an alarm occurrence can be configured in this section. Refer to pages 43, 46 and 47 for further information about the settin[...]
-
Página 45
45 Auto track: When a VMD alarm is detected, the cam- era will move to the home position and start the auto tracking. Default: OFF [Command alarm] Select an action to be taken when a command alarm is detected from the following. OFF: Does not take any action even when a command alarm is detected. 1-64: When the registered preset position is selecte[...]
-
Página 46
46 Configure the settings relating to the alarm image Click the [Alarm] tab on the "Alarm setup" page. ( ☞ page 15) ■ Alarm image setup The settings relating to the alarm image to be transmitted to an FTP server can be configured in this section. The alarm image will be transmitted to an FTP server. To transmit alarm images to an FTP [...]
-
Página 47
47 Configure the settings relating to the alarm out connector Click the [Alarm] tab on the "Alarm setup" page. ( ☞ page 15) ■ Alarm output terminal setup The settings relating to the alarm out connector can be configured in this section. The settings for the alarm output terminal can be configured only when "Alarm output" is[...]
-
Página 48
48 Set the VMD areas [VMD area] Click the [VMD area] tab on the "Alarm setup" page. ( ☞ page 15) The video motion detection areas can be set on this page. The VMD areas can be set for each preset position (up to 64 areas). When motion is detected in the set area, the alarm action will be performed. The camera can be configured to take a[...]
-
Página 49
Configure to detect motion in areas without the preset positions Configure whether or not to detect motion when the camera is not at the preset position by setting the detection sen- sitivity. The sensitivity can be set by configuring "VMD area setting except Preset position". When determining whether to detect motion even when the camera[...]
-
Página 50
50 Step 1 Select a preset position number to which the VMD area is to be set from "Preset position select" of "VMD area setting for Preset position". Step 2 Click the [Setup] button. → The VMD area setup window for the selected preset position number will be displayed. Step 3 Set the video motion detection area by dragging the[...]
-
Página 51
51 Step 5 Select the detection sensitivity from the following. The selected detection sensitivity will be applied to all the VMD areas. High/Middle/Low Default: Middle Step 6 Click the [SET] button after completing the settings. Important: The setting will not be applied unless the [SET] but- ton is clicked. Delete the VMD area set for the designat[...]
-
Página 52
52 Configure the settings relating to the mail notification [Notification] Click the [Notification] tab on the "Alarm setup" page. ( ☞ page 15) ■ E-mail notification setup The settings relating to the alarm mail can be configured in this section. To provide notification of an alarm occur- rence by e-mail, it is necessary to configure [...]
-
Página 53
53 Configure the settings relating to Panasonic alarm protocol Click the [Notification] tab on the "Alarm setup" page. ( ☞ page 15) ■ Panasonic alarm protocol setup The settings relating to Panasonic alarm protocol can be configured in this section. [Panasonic alarm protocol] Select "ON" or "OFF" to determine wheth[...]
-
Página 54
54 Configure the settings relating to the authentication [Authentication setup] The settings relating to the authentication such as users and PCs restrictions for accessing the camera can be con- figured on this page. The "Authentication setup" page has 2 tabs of the [User] tab and the [Host] tab. Configure the settings relating to the us[...]
-
Página 55
55 Configure the settings relating to the host authentication [Host] Click the [Host] tab on the "Authentication setup" page. ( ☞ page 15) The settings to restrict PCs (IP address) from accessing the camera can be configured on this page. [Host authentication] Select "ON" or "OFF" to determine whether or not to authe[...]
-
Página 56
56 Configure the settings of the servers [Server setup] The settings relating to the mail server and the FTP server can be configured on this page. The "Server setup" page has 2 tabs; the [Mail] tab and the [FTP] tab. Configure the settings relating to the mail server [Mail] Click the [Mail] tab on the "Server setup" page. ( ☞[...]
-
Página 57
57 Configure the settings relating to the FTP server [FTP] Click the [FTP] tab on the "Server setup" page. ( ☞ page 15) The settings relating to the FTP server used to transmit the alarm images can be configured on this page. [FTP server address] Enter the IP address or the host name of the FTP serv- er. Number of characters for the FTP[...]
-
Página 58
58 Configuring the network settings [Network setup] The network settings and the settings relating to DDNS (Dynamic DNS) and SNMP (Simple Network management Protocol) can be configured on this page. The "Network setup" page has 4 tabs; the [Network] tab, the [DDNS] tab, the [SNMP] tab and the [FTP] tab. Configure the network settings [Net[...]
-
Página 59
59 [Default gateway] When not using the DHCP function, enter the default gateway of the camera. Default: 192.168.0.1 <Unavailable IP addresses for the default gate- way> 0.*.*.* *.*.*.0 255.*.*.* *.*.*.255 127.0.0.1 Class D addresses (224.0.0.0 - 239.255.255.255) Class E addresses (240.0.0.0 - 255.255.255.255) Note: These IP addresses for the[...]
-
Página 60
60 Notes: • The port forwarding function changes a global IP address to a private IP address, and "Static IP masquerade" and "Network Address Translation (NAT)" have this function. This function is to be set in a router. • To access the camera via the Internet by connecting the camera to a broadband router, it is necessary t[...]
-
Página 61
61 [DDNS] Select "ON" or "OFF" to determine whether or not to use the DDNS function. Default: OFF [Host name] Enter the host name to be used. Number of characters for the host name: 1 - 64 char- acters [User name] Enter the user name (login name) to access the DDNS server. Number of characters for the user name: 1 - 32 char- act[...]
-
Página 62
62 Configure the settings relating to SNMP [SNMP] Click the [SNMP] tab on the "Network setup" page. ( ☞ page 15) The settings relating to SNMP can be configured on this page. It is possible to check the status of the camera by connecting to the SNMP manager. When using the SNMP function, contact the network administrator. [Community nam[...]
-
Página 63
63 Configure the settings relating to the FTP periodic transmission [FTP] Click the [FTP] tab on the "Server setup" page. ( ☞ page 15) ■ FTP periodic transmission The settings relating to the periodic transmission of images to an FTP server can be configured in this section. To transmit images to an FTP server periodically, it is nece[...]
-
Página 64
64 Configure the schedule settings of the FTP periodic transmission Click the [FTP] tab on the "Server setup" page. ( ☞ page 15) ■ Schedule setup The schedule settings of the FTP periodic transmission can be configured in this section. Refer to page 63 for further information about the settings relating to the FTP periodic transmissio[...]
-
Página 65
65 How to delete the set schedule Step 1 Uncheck the check box of the set day of the week. Step 2 Click the [SET] button after completing the settings. → The result will be displayed at the bottom of the win- dow.[...]
-
Página 66
66 Maintenance of the camera [Maintenance] System log check, firmware upgrade, and initialization of the setup menu can be performed on this page. The "Maintenance" page has 3 tabs; the [System log] tab, the [Upgrade] tab and the [Initialization] tab. Check the system log [System log] Click the [System log] tab of the "Maintenance&qu[...]
-
Página 67
67 Upgrade the firmware [Upgrade] Click the [Upgrade] tab of the "Maintenance" page. ( ☞ page 15) The current firmware can be checked and upgraded to the latest version on this page. Contact the dealer for further information about the firmware upgrade. [Model No.], [MAC address], [Serial number], [Firmware version], [IPL version], [Ins[...]
-
Página 68
68 Initialize/restart the camera [Initialization] Click the [Initialization] tab of the "Maintenance" page. ( ☞ page 15) Initialization of the settings and data of the camera and restarting of the camera can be performed on this page. [Initialize camera setup data (Except network and preset setup data)] Click the [Execute] button to res[...]
-
Página 69
69 About the displayed system log Error indications relating to SMTP Category POP3 server error SMTP server error Internal error Authentication error Failed to find POP3 server SMTP authentication error Other error Failed to resolve mail server address from DNS Failed to find SMTP server Entered user name or password may be incorrect. Check if the [...]
-
Página 70
70 C ategory Connection error Connection error Time adjustment synchronizing with NTP succeeded. Internal error Internal error No response from the server No response from the server Auto time adjustment succeeded. Other error Password error for the entered user name IP address updated error Other error • The designated IP address of the DDNS may[...]
-
Página 71
71 • Are you accessing the wrong IP address? Check the connection as follows: With the Windows command prompt, > ping "IP address of the camera" When the WV-NS202 replies, the camera is function- ing normally. If not, proceed either of the following. • Restart the camera and change the IP address by using the Panasonic IP setup sof[...]
-
Página 72
6 • Is the focus adjusted correctly? Adjust the focus correctly by clicking the focus but- tons. • Is there dust or dirt on the lens? Check if there is dust or dirt on the lens. • Is "Allow" selected for "FTP access" on the [Network] tab of "Network setup" page? If not, select "Allow". • Is the power [...]
-
Página 73
73 • Is any part of the camera worn out? When the camera does not move to the exact position frequently, the driving parts may be worn out. Contact the dealer for assistance. • When the camera position is moved from the preset position after turning on the power of the camera, execute the refresh position function from the [Initialization] tab [...]
-
Página 74
• Isn ’ t the SD memory card out of order? There are limited times to overwrite on an SD memory card. When frequently overwritten, it may be at the end of product life. It is recommended to replace the SD memory card. • Is the viewer software installed on the PC? Confirm that the viewer software "Network Camera View3" is installed. [...]
-
Página 75
• Are images displayed on a full screen? Audio will not be transmitted when displaying images on a full screen. • Press the [F5] key on the keyboard of the PC or click the [Live] button. 7 5 • Is the viewer software installed on the PC? Confirm that the viewer software "Network Camera View3" is installed. • Is the OS in use Window[...]
-
Página 76
76 • This may occur due to the display adapter and driver combination. When this has occurred, first update the driver of the display adapter to the latest version. If updating the driver does not solve the problem, adjust the hardware acceleration as follows. The following are descriptions for when Microsoft XP Professional SP2 is installed on t[...]
-
Página 77
77 • Click "Internet Options" on the Tools menu of Internet Explorer, and then click the [Security] tab. Then, click the [Custom Level … ] button to open the "Security Setting" window. Under "Miscellaneous", select "Enable" for "Allow script-initiated windows without size or position constraints"[...]
-
Página 78
78 Director y Structure of Drive B Drive B FTP ALARM 060101 060102 File name 01 0123 06010101 06010102 LOCAL PULL File name 01 06010101 06010102 00000001 00000001 LOG ← Destination where images are to be saved by the SD memory recording function of Panasonic network disk recorder ← Destination where log files are to be saved Image failed to tra[...]
-
Página 79
Panasonic Canada Inc. 5770 Ambler Drive,Mississauga, Ontario, L4W 2T3 Canada (905)624-5010 http://www.panasonic.ca Panasonic Sales Company Division of Panasonic Puerto Rico Inc. San Gabriel Industrial Park 65th Infantry Ave. KM. 9.5 Carolina P.R. 00985(809)750-4300 Panasonic System Solutions Company, Unit Company of Panasonic Corporation of North A[...]