Partner Tech EM200PR manual

EM-200 User Manual[...]

[...]

i Copyright This publication, including all photographs, illustrations and software, is protected under international copyright laws, with all rights reserved. Neither this manual, nor any of the material contained herein, may be reproduced without written consent of the author . Disclaimer The information in this document is subject to change with[...]

ii About this manual This manual is intended for system administrators who are familiar with setting up a new system and installing an operating system. The manual consists of the following sections: Chapter 1 Getting Started: This section covers unpacking and checking the package contents, identifying components, installing the battery pack, charg[...]

iii Revision history V ersion 1.0, August 2009[...]

iv T ABLE OF CONTENTS CHAPTER 1 GETTING ST ARTED ................................................ 1 Unpacking the machine..................................................................................1 Checking the package contents ....................................................................2 Identifying components ......................[...]

1 CHAPTER 1 GETTING ST AR TED This chapter describes the procedures from unpacking the EM-200, to powering it on. The following topics are described. • Unpacking the machine on page 1 • Checking the package contents on page 2 • Identifying components on page 3 • Installing the battery pack on page 8 • Charging the battery p[...]

2 CHAPTER 1 GETTING ST AR TED Checking the package contents After you unpack the device, check that the following items are included. If any item is missing or appears damaged, contact your dealer immediately . AC adapter Driver CD with drivers and the user manual PDF le. EM-200 Metal Stylus Battery Power cord Protection pack Quick Start Guide Q[...]

3 Identifying components This section describes the parts and connectors on the machine. Front view 1 2 3 4 5 6 7 9 8 Figure 1.2 Front view Component Description 1 Power indicator 2 Battery charging indicator 3 HDD status indicator 4 W iFi On/ Off indicator 5 Bluetooth On/ Off indicator 6 3.5G LAN On/Off indicator (optional) 7 Built-in Microphone 8[...]

4 CHAPTER 1 GETTING ST AR TED Left view 1 Figure 1.3 Left view Component Description 1 5-in-1 media card slot 2 Express card 34 slot 3 USB port 4 Power button 5 RJ45 LAN jack 6 DC IN 3 2 4 5 6[...]

5 Right view Figure 1.4 Right view 1 2 3 4 5 Component Description 1 VGA port 2 USB port 3 V entilation hole 4 Headphone jack 5 Microphone jack[...]

6 CHAPTER 1 GETTING ST AR TED Rear view Figure 1.5 Rear view 1 3 3 2 1 Component Description 1 Speaker 2 Battery pack 3 Charger pin: connect to a cradle for char ging the battery . Do not short-circuit the 3 charger pins. A short-circuit may cause damage to the machine and present risks for electric shock or re. IMPORT ANT[...]

7 Bottom view Figure 1.6 Bottom view 1 2 1 3 4 5 6 7 Component Description 1 Mounting hole 2 Camera (optional) 3 Battery lock switch 4 Memory , W iFi module, Bluetooth module and 3.5G LAN module (optional) slots 5 Battery pack 6 HDD compartment 7 Battery release latch[...]

8 CHAPTER 1 GETTING ST AR TED Installing the battery pack 1. Overturn the EM200 so that the bottom is facing up toward you, as shown in the right. Slide the battery release latch to the unlock position. 2. Align EM200 battery compartment pins to the battery connector . Slightly slide and press the battery pack into the compartment until the battery[...]

9 Charging the battery pack Plug the AC adapter power cord into an electrical outlet, then connect the DC plug of the adapter cable to the EM-200.Ittakesapproximately2–4hourstofullychargethebatteryforthersttime.Subsequentchar ges might take longer . IMPORT ANT T o protect and prolong the life [...]

1 0 CHAPTER 1 GETTING ST AR TED Powering on The power button located on the left side of the EM200, press the power button the turn it on. T o force power off , long press the power button for 4~5 seconds. NOTE[...]

1 1 CHAPTER 2 BIOS SETUP The primary function of the BIOS (Basic Input and Output System) is to identify and initiate component hardware. The BIOS parameters are stored in non-volatile BIOS memory (CMOS). CMOS contents don’ t get erased when the computer is turned off. The following topics are described in this chapter . • About the Setup Ut[...]

1 2 CHAPTER 2 BIOS SETUP Entering the Setup Utility Press the F2 key during booting to access the BIOS Setup Utility: BIOS Navigation Keys The BIOS navigation keys are listed below . Key Function ←→ Select the menu titles ↑↓ Select the items Esc Exits the current menu F1 Displays a screen that describes all key functions F7/F8 Changesthe[...]

13 Using BIOS When you start the Setup Utility , the main menu appears. A highlight indicates which option is currently selected. Use the cursor arrow keys to move the highlight to other options. When an option is highlighted, execute the option by pressing <Enter>. Some options lead to pop-up dialog boxes that prompt you to verify that you w[...]

1 4 CHAPTER 2 BIOS SETUP Main Menu Press right/left arrow key to select the Main menu, which displays the following screen: System BIOS V ersion This item shows the information about BIOS version. Processor T ype This item shows the CPU type. System Bus Speed This item shows the FSB speed. System Memory Speed This item shows the memory clock speed.[...]

15 Advanced Menu Press right/left arrow key to select the Advanced menu, which displays the following screen: Advanced S3 This item is used to enable/ disable the ACPI S3 mode, it can turn on and off the PC within seconds. Keyboard Language This item is used to select the keyboard language of external USB keyboard. Figure 2.3 Advanced menu InsydelH[...]

1 6 CHAPTER 2 BIOS SETUP ► Boot Conguration Usethissubmenutosetthebootconguration.Selecttheitemandpress<Enter>toopenthefollowingmenu: InsydelH2O Setup Utility Boot Configuration Numlock [Off] Item Specific Help F1 Help ↑↓ Select Item F7/F8 Change Values F9 Setup Default ESC Exi[...]

17 HDC Congure as This item is used to select the hard disk interface type. A T A/IDE Mode This item is used to select the A T A/IDE mode. ► IDE Conguration UsethissubmenutosettheIDEconguration.Selecttheitemandpress<Enter>toopenthefollowingmenu: InsydelH2O Setup Utility IDE Conf[...]

1 8 CHAPTER 2 BIOS SETUP Channel 1 Master Displays the name of the current hard disk device in channel 1 master . T ype: Ifyouleavethisitemat Auto,thesystemwillautomaticallydetectandcongurethedeviceitchannel 1master .IfyouchangethevaluetoUserDenedandthen[...]

19 Security Menu The security system allows you to set a password to prevent unauthorized access to BIOS. Press right/left arrow key to select the Security menu, which displays the following screen: Supervisor/ User Password ThesetwoeldsindicateiftheSupervisor/UserPasswordsaresetornot. Installed: System Passwo[...]

2 0 CHAPTER 2 BIOS SETUP Boot Menu This menu allows the user to set the boot-related options. Press right/left arrow key to select the Boot menu, which displays the following screen: InsydelH2O Setup Utility Quiet Boot [Enabled] ► Boot Type Item Specific Help F1 Help ↑↓ Select Item F7/F8 Change Values F9 Setup Default ESC Exit ←→ Select M[...]

21 Figure 2.9 Boot Device Priority submenu Figure 2.10 Boot T ype Order submenu InsydelH2O Setup Utility Boot Device Priority ► Boot Type Order Item Specific Help F1 Help ↑↓ Select Item F7/F8 Change Values F9 Setup Default ESC Exit ←→ Select Menu Enter Select ► Sub-Menu F10 Save and Exit Main Advanced Security Boot Exit InsydelH2O Setup[...]

2 2 CHAPTER 2 BIOS SETUP Exit Menu This menu allows the user to save CMOS setting and exit the Setup Utility . Press right/left arrow key to select the Exit menu, which displays the following screen: Figure 2.1 1 Exit Menu Exit Saving Changes Allows the user to save changes to CMOS and reboot the system. The following message is prompted when the u[...]

23 CHAPTER 3 UPGRADING COMPONENTS This chapter describes how to upgrade components for the EM-200. The following topics are described. • Safety and precautions on page 23 • Before you begin on page 24 • Upgrading the hard drive on page 25 • Upgrading the memory module on page 27 • Upgrading the Mini-PCIE card on page 28 Saf[...]

2 4 CHAPTER 3 UPGRADING COMPONENTS Before you begin Make sure you have a stable, clean working environment. Dust and dirt can get into components and may cause malfunction. Adequate lighting and proper tools can prevent you from accidentally damaging the internal components. Mostoftheelectricalandmechanicalconnectionscanbe?[...]

25 Upgrading the hard drive Refer to the following to remove and replace the hard drive. 1. T urn off the EM-200. 2. Disconnect the AC adapter cable. 3. Overturn the EM200. 4. Remove the two screws as shown in the right. 5. Open and remove the hard drive compartment cover . 6. Slide the hard drive to disconnect.[...]

2 6 CHAPTER 3 UPGRADING COMPONENTS 7. Remove the hard drive. 8. Remove the four screws, then remove the hard drive out from the tray . T o replace the hard drive, reverse the above procedure.[...]

27 Upgrading the memory module Refer to the following to remove and replace the memory . 1. T urn off the EM-200. 2. Disconnect the AC adapter cable. 3. Overturn the EM200. 4. Remove the two screws as shown in the right. 5. Open and remove the memory module compartment cover . 6. Locate the memory module, as shown in the right.[...]

2 8 CHAPTER 3 UPGRADING COMPONENTS 7. Pop out the two silver latches holding the memory module into place. The module pops up. Grasp the outer edges of the memory module with thumb andforenger ,andthengently remove it. T o replace the memory module, reverse the above procedure. Upgrading the Mini-PCIE card Refer to the following t[...]

29 6. Locate the Mini-PCIE card, as shown in the right. 7. Remove the screw on the Mini- PCIE card, Mini-PCIE will pop up 45 degree. 8. When it pops up, gently remove it. T o replace the Mini-PCIE card, reverse the above procedure.[...]

3 0 CHAPTER 3 UPGRADING COMPONENTS[...]

31 APPENDIX This appendix describes locating and solving problems that you may encounter while using the EM-200. T roubleshooting Often after time spent troubleshooting, the problem is traced to something as simple as a loose connection. Checkthefollowingbeforeproceedingtotheproblem-specicsolutions. Tips for T roublesh[...]

32 APPENDIX General Problems Refer to the following general problems you may encounter . PROBLEM SOLUTION The display screen is dark. Make sure that the EM-200 is not in suspend mode. An incorrect date and time are displayed. Set the date and time in BIOS or Operation System. Cannot be turned off after crash. Long press the power button for 4 secon[...]

33 Having the EM-200 Serviced If you are unable to solve the problem, you should have the terminal serviced. Pack the terminal in the original carton. (See “Unpacking the EM-200” on page 1.) Include a description of the problem and a checklistofthestepsyoutookwhentryingtoxtheproblem.Theinformationmay[...]

34 APPENDIX Specication Processor Intel Atom 1.6GHz Processor (N270) BIOS 1024K BB Flash ROM Chipset Intel 945GSE Memory Memory DDRII SO-DIMM X 1, 1GB, support up to 2GB LCD Display 10.1” TFT -LCD, 1024x600, 200 nits, LED backlight W ith T ouch Panel Resistive touch Graphics Integrated in Intel 945GSE graphics controller Hard Disk Drive One 2.[...]