Patton electronic 3086 manual

Model 3086 G.SHDSL Integrated Access Device User Guide Sales Office: +1 (301) 97 5-1000 Techni cal Su ppor t: +1 (301) 97 5-1007 E-mail: suppor t@patton.com WWW: www .patton.com Part Number: 07M3086, R ev . E Revised : February 16, 2012 Impor tant This is a Class A de vice and is intended for use in a light ind ustrial environment. It is not intend[...]

Patton Electronics Company , Inc. 7622 Ric kenbacker Drive Gaithersburg , MD 20879 USA tel: +1 (301) 97 5-1000 fax: +1 (301) 869 -9293 support: +1 (301) 975-10 07 web: www.patton .com e-mail: support@p atton.com Copyright © 2012, Patton Electr onics Company . All righ ts reserved. The in forma tion in th is documen t is sub ject to ch ange wit hou[...]

3 Contents Contents .... ...... ...... ......... ...... ..... ...... ......... ...... ..... ...... ...... ......... ...... ..... ...... ......... ...... ... ... ..... ...... ...... ......... ...... 3 About this guide ....... ...... ...... ..... ......... ...... ...... ..... ......... ...... ...... ...... ........ ...... ...... ...... ....... .... .[...]

Conte nts Model 3086 G.SHDSL Integrated Access Device User Guide 4 Hardware instal lation ............... ........... ........... ................. ........... ............ ........... ........... ....... .... ............ ........... .......28 What you will need ....................... ........... ........... ............ ................. .......[...]

5 Model 3086 G.SHDSL Integrated Access Device User Guide Conte nts Switch Bank S3 ............ ................ ............ ........... ........... ............ ................. ........... .......... . ........... ...... .......51 Switch S3-1: CO/CP sel ection ...................... ........... ............ ........... ........... ..............[...]

Conte nts Model 3086 G.SHDSL Integrated Access Device User Guide 6 PCM Mode ...... ................. ........... ............ ........... ........... ................. ............ ........... .......... . ........... ............ . 63 PCM Transmit P olarity ............... ............ ........... ........... ............ ........... .............[...]

7 Model 3086 G.SHDSL Integrated Access Device User Guide Conte nts Software Upgrades .................... ........... ........... ........... ............ ................. ........... ........... ...... ........... ........... ...........136 Configuration ... ........... ........... ........... ................. ............ ........... ..........[...]

Conte nts Model 3086 G.SHDSL Integrated Access Device User Guide 8 PPP Support ................. ............ ........... ................. ........... ........... ............ ........... .............. ... ......... ........ ........... .....154 ATM Protocols............. ............ ........... ................. ........... ........... ........[...]

9 Model 3086 G.SHDSL Integrated Access Device User Guide Conte nts managementType: ( Default Value: no_ maintenance) ........... ........... ............ ........... ........... ........... ...........1 73 MgtState ..... ........... ................. ........... ........... ............ ........... ................. ........... ........... . ......[...]

Conte nts Model 3086 G.SHDSL Integrated Access Device User Guide 10 Channel Segment S ize ............. ........... ................. ........... ............ ........... ........... ................. ... ........ ...........190 DLCI: Data Link Connection Identifier ........................ ............ ........... ........... ................. ...[...]

11 About this guide This guid e descri bes in stalling and co nfiguri ng a Patton Electr onics Mode l 3086 G.SHDSL Int egrated Acce ss Device ( IAD). The instruc tions in this guide are b ased on the fo llowing assum ptions: • The IAD may connect to a ser ial DTE de vice • There is a LAN connected to the Ethernet por t of the IAD • Users wi l[...]

About this guide Model 3086 G.SHDSL Integrated Access Devi ce User Guide 12 Precau tions Notes and ca ution s, wh ich hav e the fol lowin g mean ings, are used throughout this guide to help you become aware of potential IAD problems. Warnings relate to p ersonal injury issues, and Cautions refer to potential property d amage. Note Calls attention t[...]

13 Model 3086 G.SHDSL Integrated Access Device User Guide About this guide Safety when working wi th electricity Factory default parameters The Model 3086 G.SHDSL IAD has the following factory default parame ters. • Ethernet IP add ress: 192.168. 200.10/24 • WAN Conne ction: PPPoH Bridged • Autonegotiate t he G.SHDSL speed • Ethernet and se[...]

About this guide Model 3086 G.SHDSL Integrated Access Devi ce User Guide 14 T ypographic al conventions used in this document This section de scribes th e typographical con ventions and terms use d in this guide. Gener al conven tions The procedures d escribed in this manual use the following text conventions: Mouse conventi ons The following c onv[...]

15 Chapter 1 General I nformation Chapter cont ents Model 3086 G.SHDSL IAD overview ...... ............ ........... ................. ........... ............ ........... ........... ..... ............ .......16 General attribut es .................... ........... ............ ........... ........... ................. ............ ........... ... .[...]

1 • General In formatio n Model 3086 G.SHDSL Integrated Access Devi ce User Guide 16 Model 3086 G.SHDSL IAD overv iew Model 3086 G.SHD SL IAD over view The Model 30 86 is a G.SHSDSL Int egrated Acce ss Device t hat combines high-speed IP routing and acce ss via ATM/FR/PPP along with TD M data acces s. The model 3086 off ers di rect connect ion to[...]

Model 3086 G.SHDSL IAD overvi ew 17 Model 3086 G.SHDSL Integrated Access Device User Guide 1 • Ge nera l Info rma tion • Standa rd 1 year warran ty. • Convenient and standard RJ connectors for Ethernet, Line, and Console. G.SH DSL Ch aract eris ti cs • Full dupl ex 2.3 Mbps speed ov er 2-w ire (in acco rdance with ETSI/ITU stand ard G.991.2[...]

1 • General In formatio n Model 3086 G.SHDSL Integrated Access Devi ce User Guide 18 Model 3086 G.SHDSL IAD overv iew PPP Suppo rt • Point-to -Point P rotocol over HD LC • PPPoA (RFC 2364) Point-to-Point Protoc ol over ATM. • PPPoE (RFC 2516) C lient for autonomous net work connectio n. Eliminates the requir ement of i nstalling client soft[...]

Model 3086 G.SHDSL IAD overvi ew 19 Model 3086 G.SHDSL Integrated Access Device User Guide 1 • Ge nera l Info rma tion • SNMPv1 (RFC 1157) MIB II (RFC 1213) • Quick Start Se tup runs through common o ptions to simplify circ uit turn-up. • Logging via S YSLOG, and VT-100 c onsol e. Consol e port s et at 9600 b ps 8/N/1 settings no flow contr[...]

1 • General In formatio n Model 3086 G.SHDSL Integrated Access Devi ce User Guide 20 Model 3086 G.SHDSL IAD overv iew The t est m ode switches are : • Normal, Local, and Remote Loopbacks • Normal, 511, and 511E pse udo-random bi t patte rns Table 3. Status LE D descrip tions Powe r Green ON indicates that pow er is applied . Off indicates tha[...]

Model 3086 G.SHDSL IAD overvi ew 21 Model 3086 G.SHDSL Integrated Access Device User Guide 1 • Ge nera l Info rma tion Console po rt (outline d in red) The unshie lded RJ-45 RS-232 c onsole DCE po rt (E IA-561) w ith the p in-out li sted i n the fol lowing t able : Rear panel con nectors and switc hes On the rear pane l from left to right are the[...]

1 • General In formatio n Model 3086 G.SHDSL Integrated Access Devi ce User Guide 22 Model 3086 G.SHDSL IAD overv iew Ethernet por t (outlined in gr een) Shielded RJ- 45 10Base-T/10 0Base-TX Ether net por t using pi ns 1,2,3, & 6. See MDI-X switc h for hub o r transceiv er configuration.The following table defines co nditions that occur when [...]

23 Chapter 2 Product Over view Chapter cont ents Product Overview..................... ........... ................. ........... ........... ............ ........... ................. ........... ................. .......24 Applications Overvi ew .................. ........... ........... ................. ............ ........... ........... .....[...]

2 • Produc t Overvie w Model 3086 G.SHDSL Integrated Access Devi ce User Guide 24 Product Overview Product Overview The Model 3086 IAD operates as a bridge or a router and has three ports for communication: • The Et hernet port—C onnects to the LAN side of the c onnection • The Line port—Pro vides the G.S HDSL transmiss ion connection b e[...]

Product Overview 25 Model 3086 G.SHDSL Integrated Access Device User Guide 2 • Pro duct Ove rview Internet/Extrane t Access While Fr ame Relay (FR) rema ins the most ec onomical ser vice to conne ct multiple corporate lo cations over PVCs (Private Virtual Conne ctions) at burst and fixed data rates, high spee d DSL is becoming the technology of c[...]

2 • Produc t Overvie w Model 3086 G.SHDSL Integrated Access Devi ce User Guide 26 Product Overview PCM enco ded voice fro m a PBX are car ried in sp lit-DSL- bandwidth mode to a Central Office. At a Service Provider loc ation the Model 3096 RC separate s PCM voice and IP d ata traffic for trans port over the WAN Metro Intranet Access Patton’s M[...]

27 Chapter 3 Quick Star t Installation Chapter cont ents Hardware instal lation ............... ........... ........... ................. ........... ............ ........... ........... ....... .... ............ ........... .......28 What you will need ....................... ........... ........... ............ ................. ........... .....[...]

3 • Quic k Start Install ation Model 3086 G.SHDSL Integrated Access Devi ce User Guide 28 Hardware installation Hardware instal lation If you are already f amiliar w ith Model 3086 IAD instal lation and configurat ion, thi s chapter wi ll enabl e you to finish the job quickly. Installation c onsists of the follow ing: • Prepari ng for the insta[...]

Hardware installation 29 Model 3086 G.SHDSL Integrated Access Device User Guide 3 • Quick Start Installation 2. Verify that t he AC power c ord incl uded with your 3 086 is c ompatible wi th local st andards. If i t is not, refer to C hapter 10, “Contacting Patton for assistance” on page 27 to find out how to r eplace it with a comp atible po[...]

3 • Quic k Start Install ation Model 3086 G.SHDSL Integrated Access Devi ce User Guide 30 Hardware installation IP ad dres s Quic k Sta rt modif ic ati on The first parame ter to change is the IP ad dress from the default IP addres s of 1 92.168.1.1/24 ( for the CP units) or 192.168.200.1 1 (for CO units ) to your s ele cted IP addres s. Follow t[...]

Hardware installation 31 Model 3086 G.SHDSL Integrated Access Device User Guide 3 • Quick Start Installation The Mode l 3086 home p age di splays (s ee Figure 3). Figure 3. Model 3086 home page The Mode l 3086 menu st ructure is shown i n figure 4 on page 32.[...]

3 • Quic k Start Install ation Model 3086 G.SHDSL Integrated Access Devi ce User Guide 32 Hardware installation Figure 4. Model 308 6 Menu Structure[...]

33 Chapter 4 Basic Application Configurations Chapter cont ents Introduction ....................... ........... ........... ............ ........... ........... ................. ............ ....... ......... ............ ........... .......36 TDM Port ............... ........... ................. ........... ........... ............ ........... [...]

4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 34 Switch S3-8 .................. ........... ............ ........... ........... ................. ............ ........... ........... .. ......... ............ 52 Web Interfac e Configuration .. ................. ........... ........... ............ [...]

35 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations Line Probe ........ ............ ........... ................. ........... ........... ............ ........... ................. ........... ........... .............63 Using the 3086 in Routed or Bridged appli cations ..................... .........[...]

4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 36 Introduction Intr oduction The Model 3086 IAD comes with two data ports: a TDM (V.35, X.2 1, or T1/E1), and an Ethernet port. TDM port data i s not pro cessed by th e router or brid ge core in the 3 086, dat a is t ransmitt ed unproc esse d over the D[...]

TDM Port 37 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations The following tabl e shows the paramete rs that can be configured v ia the HTTP serve r using a web browser. TDM P ort Model 3086 units e nable V.35, X.21, or T1/E1 interf ace connect ion to loc al routers, mult iplexer s, or PBX devic es. Th[...]

4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 38 TDM Port sented o n a female D B-15 con nector, whil e the T1/E1 interface i s presented o n an RJ-48C jack, addition ally the E1 inter face is pres ented on du al BNC. Figure 5 shows the dif feren t connector s offe red for the seri al port. Figure 5[...]

V.35 and X.21 Ports 39 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations V .35 and X.21 Po rts The ser ial port in the 3086 is simpl e to install . The V.35 in terface is wired as a DCE, the X.21 interf ace can be configured as a DCE (factory default), or as a DTE via internal configuration jumper. The [...]

4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 40 V.35 and X.21 Ports 2. Locate th e small dau ghter bo ard on the 3086 board betwee n the DSL po rt (RJ- 45) conne ctor and t he seria l port connect or ( Figure 7 s hows locati on of DTE/D CE daughter boar d). Figure 7. Locati on of DCE/DTE board 3. T[...]

V.35 and X.21 Ports 41 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations Switch co nfigurati on: Switch c onfiguratio n in the 3 086 is to be used i n situatio ns where t he 3086 fu nctions as a DSL modem car rying TDM (X.21, V.3 5) data only, without re sorting to the use of a PC fo r configuration. Wh[...]

4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 42 V.35 and X.21 Ports Switch Bank S2 Table 4 shows the default configur ation for s witch S2 . A descri ption o f S2 opt ions fol lows the t able. Switches S2-1 through S2-7. U se Switches S2-1 th rough S2-7 to set the data rate. Each posi tion represen[...]

V.35 and X.21 Ports 43 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations Switch S2-8. S2-8 activates c onfigurat ion of Model 3086 vi a DIP switches. Any time the user desires to mod - ify the 3086 config uration avail able th rough DIP switche s, make the changes to th e corres pondi ng switch es and t[...]

4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 44 T1 Interface installed at a Central Office should be set to CO . For po int-to-point operation, one unit mu st be CO while the other m ust be CP . Switch S3-3: Transmit Clock Mode. Use Sw itches S3-3 to conf igure the Mo del 3086 f or internal or exte[...]

T1 Interface 45 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations T1 Inter face Configu ration The 3086 T 1 interfa ce can be configur ed via DIP switche s, HTTP/SNMP, or command line int erface (CL I). This se ction disc usse s DIP switche s and HTTP ( web serv er) co nfigurati on. For C LI, see Appe n[...]

4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 46 T1 Interface Switches S2-1 through S2-7. U se Switches S2-1 th rough S2-7 to set the data rate (see Table 5 on page 43. Each posi tion represe nts nx64 settings. Switch S2-8. S2-8 activates c onfigurat ion of Model 3086 vi a DIP switches. Any time the[...]

T1 Interface 47 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations Switch Bank S3 The table be low sh ows the defau lt confi guratio n for s witch S3. A desc ripti on of S3 option s follow s this t able . Switch S3-1: CO/CP sele ction. CO an d CP st and f or Cent ral Offic e and Cus tome r Pre mise r esp[...]

4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 48 T1 Interface Switch S3-6: A nnex. Annex A and B offer spectr al compatibi lity with T 1 and E1 signal s resp ectiv ely, this fea - ture reduces the interference betwe en DSL lines and ad jacent E1or T1 lines . For regions whe re T1 is used, select Ann[...]

E1 Interface 49 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations Line Bui ld Out: Select f rom 100 ohm ( 0dB), 100 o hm (-7.5dB ), 100 ohm ( -15dB), and 10 0 ohm (-22.5 dB). For CSU/DSU appl ication u se 100 0dB option, co nsult your T1 servi ce provid er for mor e informat ion. FDL Mode: Options are A[...]

4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 50 E1 Interface informatio n and cable req uirements. If the E1 c onnect ion is made via t he BNC co nnecto rs, connect the TX BNC of the 3086 to Reci ve (RX) BNC o f the local E 1 devic e, and vice v ersa. • To connect t he 3086’ s E1 port to a Telc[...]

E1 Interface 51 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations Switch S2-8. S2-8 activates c onfigurat ion of Model 3086 vi a DIP switches. Any time the user desires to mod - ify the 3086 config uration avail able th rough DIP switche s, make the changes to th e corres pondi ng switch es and then se [...]

4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 52 E1 Interface installed at a Central Office should be set to CO . For p oint-to-poin t operation, o ne unit must be C O while the other m ust be CP. Switch S3-3: Transmit Clock Mode. Use S witches S3 -3 to c onfigure the 3086 f or inter nal or exte rna[...]

E1 Interface 53 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations Web Interface Co nfiguration Launch Inter net Explorer or s imilar web bro wser, type the IP address of the 2 603, enter username ‘ superuser’ and p assword ‘super user’. Fr om the main p age clic k on th e E1/T1 o ption > Conf[...]

4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 54 Using the 3086 as a si mple modem (TDM data over DSL) Using the 3086 as a simple modem (TDM data over DSL) Serial port connection only, Ethernet port not used to send data over DSL but can be used for management. There are thre e ways to configure the[...]

Using the 3086 as a si mple modem (TDM data over DSL ) 55 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations fi gshdsl set pcmmode Serial fi gshdsl set ghsannex AnnexB fi gshdsl set serialTS 32 fi system config save Wait fo r 'confi gurati on save d' mess age… Saving configuration… fi [...]

4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 56 Using the 3086 as a si mple modem (TDM data over DSL) W eb br owser confi gur ati on From the main menu i n the 3086, s elect GSHDS L > Confi gur ati on . Enter the selectio ns as shown in the screen below. For Terminal Type , se lec t Central for [...]

Using the 3086 as a si mple modem (TDM data over DSL ) 57 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations Intended Serial In terface Data Rate Selects the data rate assigned to the serial po rt in nx64 kbps increm ents from 64 kbps to a maximum of 2.3 Mbps . The follow ing condit ions apply w hen conf[...]

4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 58 TDM Plus Ethernet Tra ffic Interface Type Selects betwe en HDLC or ATM tran sports. This sett ing must match the transport selecte d in the “WAN con - nection” menu. Whe n using th e 3086 to tr ansport se rial data only, sele ct HDLC tr ansport. P[...]

TDM Plus Ethernet Traf fic 59 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations CLI configur ation Configuring the 30 86 to transport TDM and IP data c oncurrently requires use o f a Laptop or PC terminal. When carrying IP data, the Model 3086 off ers two WA N encaps ulation met hods: HDLC and ATM. In a[...]

4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 60 TDM Plus Ethernet Tra ffic • For 3086 A at the prompt type gshdsl set terminal central <enter> • For 3086 B type fi gshdsl set terminal remote Interface Type Select s betwee n HDLC and ATM transp ort. To s elect HDLC f or bot h 3086 type : [...]

TDM Plus Ethernet Traf fic 61 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations figuration optio n”. Use the drop down m enus to enter the required c onfiguration. Once all settings have been selected, cl ick on the Configure button at the bottom o f the screen. Circuit ID User can enter up to 30 alph[...]

4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 62 TDM Plus Ethernet Tra ffic Intended Serial In terface Data Rate Selects the data rate assigned to the serial po rt in nx64 kbps increm ents from 64 kbps to a maximum of 2.3 Mbps . The follow ing condit ions apply w hen configur ing the 3 086 serial p [...]

TDM Plus Ethernet Traf fic 63 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations Interface Type Selects betwe en HDLC or ATM tran sports. This sett ing must match the transport selecte d in the “WAN con - nection” menu. Whe n using th e 3086 to tr ansport se rial data only, sele ct HDLC tr ansport. P[...]

4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 64 Using the 3086 i n Routed or Bridged appli cations Using the 3086 in Routed or Bridged appl ications T wo stan d-alo ne unit s dire ctl y conn ected Ethernet extension (HDLC – PPPOH) Bridged Model 3086 (Remote) Confi guration Steps (PPPoH Bridged) F[...]

Using th e 3086 i n Routed o r Bridge d applic ations 65 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations Verify the settings to be: –I n t e r f a c e = 1 – LLC hea der mod e = dialou t – LLC header mode = off –H D L C h e a d e r m o d e = o n – No authentica tion –L e a v e User name and[...]

4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 66 Using the 3086 i n Routed or Bridged appli cations Change Terminal Type to Central and Interface Type to hd lc . Click on the Configure button. In the Action submenu und er G.SHDSL, ch ange Action to Deactivate , t hen click on Ac tion . Return to Act[...]

Using th e 3086 i n Routed o r Bridge d applic ations 67 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations – LLC header mode = off –H D L C h e a d e r m o d e = o n – No authentica tion – Leave User name and Passw ord blank. Clic k on Apply . 3. Go to G.SHDSL in the Configu ration Menu, then th[...]

4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 68 Using the 3086 i n Routed or Bridged appli cations 1. Now you can br ing up the web-page management syst em on your br owser by ent ering th e IP addres s of the 3086 . Clic k on G.SHDSL in the Configura tion Men u > Co nfigurati on > verify tha[...]

Using th e 3086 i n Routed o r Bridge d applic ations 69 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations Clic k on Conf igure . 3. Go to Configuratio n Menu > Config uration > WA N connections > Edit (for PPPo H Routed se rvice) > Edit ‘IP Interface’ > Ipa ddr: [enter the WAN IP Ad [...]

4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 70 Using the 3086 i n Routed or Bridged appli cations 4. Configur ation Menu > Confi gurati on > IP Routes > Click o n Create n ew Ip V4 Ro ute > Create the gatew ay to the remote 3086 by ent ering th e WAN IP addres s of the re mote 3086, i [...]

Using th e 3086 i n Routed o r Bridge d applic ations 71 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations 5. Go to G.SHDSL in the Configurati on Menu, then the submenu Stat us. The Mod em Stat e shoul d be “deactivated.” (If not, go to the Action and chan ge it to deactivate .) Then in the Action s[...]

4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 72 Using the 3086 i n Routed or Bridged appli cations Clic k on G.SHDSL in the Configur ation Menu > Conf iguration > verif y that Ter minal Type is re mote and Interface Type is “ hd lc .” If changed, then click on Co nfigure . Clic k on Actio[...]

DSLAM Connections with remote CPE uni ts 73 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations –C o s t : 1 –I n t e r f a c e : [ b l a n k ] 5. Go to G.SHDSL in the Configuration Menu, then the submenu Status . T he Mod em Sta te sh ould be “d eact i - vated.” (If not, go to the Acti on and cha[...]

4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 74 DSLAM Connections with remote CPE units Model 30 86 (Remote) Configura tion Steps (RFC 148 3 Bridged) From the co mmand line interf ace (CLI) v ia the RS- 232 control port, fi ip list interfaces One IP interf ace is cal led ip1 wi th an IP addres s o[...]

DSLAM Connections with remote CPE uni ts 75 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations Change Terminal Type to Remote and Interface Type to atm . C lick on the Configure button. In the Action submenu und er G.SHDSL, ch ange Action to Deactivate , then cli ck on Action. Return to Action, select St[...]

4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 76 DSLAM Connections with remote CPE units Leave VCI as 35 and Encapsulation Method as LLC/SNAP. Then click on Ap ply . 3. Go to G.SHDSL in the Config uration Menu, then the submenu Configur ation. Leave Terminal Type as Remot e , but change Interface Ty[...]

DSLAM Connections with remote CPE uni ts 77 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations Clic k on Create a new service in the main window, select PPPoH_ Bridged and click on the Configure button. In the Descri ption field, enter the d escription you wi sh. In this examp le, it is called PP PoH Bri[...]

4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 78 DSLAM Connections with remote CPE units Model 30 86 (Central) Configu ration Steps (PPP oH Bridged) From the co mmand line interf ace (CLI) v ia the RS- 232 control port, fi ip list interfaces One IP interf ace is cal led ip1 wi th an IP addres s of [...]

DSLAM Connections with remote CPE uni ts 79 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations PPPoA Bridged (RFC 2364 ) Configuration The user data for tr ansmission is in the form of IP packets but encapsulated in a PPP packet, transmitted an d received thro ugh a PPP session to the c onnection. The PP[...]

4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 80 DSLAM Connections with remote CPE units –V P I = 0 – VCI = 300 – LLC header mode = off –H D L C h e a d e r m o d e = o f f – No authentica tion – Leave User name and Passw ord blank. Clic k on Apply . 3. Go to G.SHDSL in the Config uratio[...]

DSLAM Connections with remote CPE uni ts 81 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations – No authentica tion – Leave User name and Passw ord blank. Clic k on Apply . 3. Go to G.SHDSL in the Config uration Menu, then the submenu Configur ation. Leave Terminal Type as Central . Change Interface [...]

4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 82 DSLAM Connections with remote CPE units 1. Now you can br ing up the web-page management syst em on your br owser by ent ering th e IP addres s of the 3086 . Click on G .SHDSL in th e Config uration Menu > Co nfig uratio n > veri fy tha t Termin[...]

DSLAM Connections with remote CPE uni ts 83 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations In the Descri ption field, enter the description you wish. In this exam ple, it is called RFC 14 83 Routed . Change the configuratio n parameters to match the fo llowing. Descriptio n:RFC 1483 Rou ted –V P I [...]

4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 84 DSLAM Connections with remote CPE units The othe r fields should b e: – Destination:0.0.0.0 – Gateway:192.168.1 64.3 – Mask:0.0.0.0 –C o s t : 1 –I n t e r f a c e : [ b l a n k ] 4. Go to G.SHDSL in the Configurati on Menu, then the submenu[...]

DSLAM Connections with remote CPE uni ts 85 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations Change the IP address so it is in the same subnet as the laptop PC. The laptop’s IP address is 192.168.172. 229, so i n this ex ample, change the IP address of the 3086 t o 192. 168.172.3. The default IP mask[...]

4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 86 DSLAM Connections with remote CPE units Click on Action > Select de activate fo r Action > Cl ick on the Acti on button. 2. On the Menu, go to Configuration, then to WAN C onnections. Delete both default W AN services already defi ned. Clic k on[...]

DSLAM Connections with remote CPE uni ts 87 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations 3. Configuration Menu > Configur ation > IP Routes > Click on Cr eate new Ip V4 Route > Crea te the gate - way to the r emote 3086 b y entering th e WAN IP addres s of the remote 3086, in this e xam[...]

4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 88 DSLAM Connections with remote CPE units 4. Go to G.SHDSL in the Configurati on Menu, then the submenu Stat us. The Modem S tate sh ould be “deactivated.” (If not, go to the Action and chan ge it to deactivate .) Then in the Action s ubmenu under G[...]

DSLAM Connections with remote CPE uni ts 89 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations One IP interface was called ip1 with an IP ad dress of 1 92.16 8.1.1 Change it to an IP address whi ch is in the same subne t as the Desk top PC. For example, to 192.168.100.2. T h e defaul t IP mask is 255 .25[...]

4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 90 DSLAM Connections with remote CPE units –U s e r n a m e : [ b l a n k ] – Password :[blank] Clic k on Conf igure . 3. Go to Configuration Menu > Configuration > WAN co nnections > Edit (for PPPoH Routed servic e) > Edit ‘IP Inte rfa[...]

DSLAM Connections with remote CPE uni ts 91 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations 4. Configuration Menu > Configur ation > IP Routes > Click on C reate new Ip V4 Route > Create the gate - way to the r emote 3086 b y entering th e WAN IP addres s of the remote 3086, in this e xamp[...]

4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 92 DSLAM Connections with remote CPE units 5. Go to G.SHDSL in the Configurati on Menu, then the submenu Stat us. The Modem S tate sh ould be “deactivated.” (If not, go to the Action and chan ge it to deactivate .) Then in the Action su bmenu under G[...]

DSLAM Connections with remote CPE uni ts 93 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations 1. Now you can br ing up the web-page management syst em on your br owser by ent ering th e IP addres s of the 3086 . Click on G .SHDSL in th e Config uration Menu > Co nfig uratio n > veri fy tha t Termi[...]

4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 94 DSLAM Connections with remote CPE units 3. Go to Configuration Menu > Configuration > WAN co nnections > Edit (for PPPoH Routed servic e) > Edit ‘IP Inte rface’ > Ipad dr: [enter the WAN IP Address , in thi s example = 192.16 8.164.[...]

DSLAM Connections with remote CPE uni ts 95 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations PPPoA Routed (RFC 2364) This ro uted appl ication is v ery simil ar to the PPPoA Bridged applicat ion. The use r data f or transmiss ion is in the form of IP pac kets but encaps ulated in a PPP packe t, transmi[...]

4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 96 DSLAM Connections with remote CPE units Now you can br ing up the web-page management syst em on your br owser by ent ering th e IP addres s of the 3086 . Click on G .SHDSL in th e Config uration Menu > Co nfig uratio n > veri fy tha t Termin al[...]

DSLAM Connections with remote CPE uni ts 97 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations 3. In the Configuration Menu, click on Configuration then > WAN Conn ections > Ed it (for the WAN Ser - vice ppp1) > Ed it ‘PPP’ and verify or change th e following parameters on the Edit PPP webpa[...]

4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 98 DSLAM Connections with remote CPE units – Discove r Primar y DNS:true –D i s c o v e r S e c o n d a r y D N S : t r u e – Give DNS to Relay:true – Give DNS to Client:t rue – Remote DNS:0 .0.0.0 – Remote Seco ndary:0.0. 0.0 –L C P E c h [...]

DSLAM Connections with remote CPE uni ts 99 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations –C l a s s : U B R –P o r t : a t m Clic k on th e Change b utton if ch anges were m ade. 5. Click on E dit ‘IP Inte rface.’ Verif y or ch ange if necess ary th e foll owing O ptions para meter s. – I[...]

4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 100 DSLAM Connections with remote CPE units Now you can br ing up the web-page management syst em on your br owser by ent ering th e IP addres s of the 3086 . Click on G.SHDSL in the C onfiguration Menu> Configuration > v erify that Terminal Type i[...]

DSLAM Connections with remote CPE uni ts 101 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations In the Description field, enter the description you wish. In this example, it is called PPP oA Ro ute d . Change the configuratio n parameters to match the fo llowing. – Description:PPPoA Routed –V P I : 0[...]

4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 102 DSLAM Connections with remote CPE units 3. In the Configuration Menu, click on Configuration then > WAN Conn ections > Ed it (for the WAN Ser - vice ppp1) > Ed it ‘PPP’ and verify or change th e following parameters on the Edit PPP webpa[...]

DSLAM Connections with remote CPE uni ts 103 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations – IP Addr from IPCP: true – Disco ver Primar y DNS: false –D i s c o v e r S e c o n d a r y D N S : false – Give DNS to Relay: false – Give DNS to Client: f alse – Remote DNS: 0 .0.0.0 – Remote [...]

4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 104 DSLAM Connections with remote CPE units Clic k on Chang e button.[...]

DSLAM Connections with remote CPE uni ts 105 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations 4. Click on E dit ‘ATM Channel.’ Verify the O ptions to match the following. (Change if nec essary.) –T x V c i : 8 0 0 –T x V p i : 0 – Rx Vci :800 –R x V p i : 0 – Peak Cell Rate:2000 –B u r [...]

4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 106 DSLAM Connections with remote CPE units 5. Click on E dit ‘IP Inte rface.’ Verif y or ch ange if necess ary th e foll owing O ptions para meter s. – Ipaddr:1 92.168.164 .2 – Mask:255.255 .255.0 –D h c p : f a l s e –M T U : 1 5 0 0 –E n[...]

DSLAM Connections with remote CPE uni ts 107 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations 7. From the Con figuration Menu, click on Configuration > Authenticati on > Create a new user > enter the information fo r the following parameters in the web p age Details for the new user . One of t[...]

4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 108 DSLAM Connections with remote CPE units 1. Now you can br ing up the web-page management syst em on your br owser by ent ering th e IP addres s of the 3086 . 2. On the Me nu, go to Co nfiguration, then to WAN Conn ections. Delete the facto ry default[...]

DSLAM Connections with remote CPE uni ts 109 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations 3. Returning to the 3 086 Configuration Menu, cl ick on Conf iguration, th en IP Routes. – Click on “Create new Ip V4 Route .” – Destination:0.0.0.0 – Gateway:192 .168.164.3 – Mask:0.0.0.0 –C o s[...]

4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 110 DSLAM Connections with remote CPE units 4. Go to G.SHDSL in the Config uration Menu, then the submenu Configur ation. Change Terminal Type to Centra l and Interface Type to atm . Click on the Configure button. In the Action submenu und er G.SHDSL, ch[...]

DSLAM Connections with remote CPE uni ts 111 Model 3086 G.SHDSL Integrated Access Device User Guide 4 • Bas ic Application Co nfigurations Return to Action, select S tart and click on Actio n . Model 3086 (Central) Configu ration Steps (IPoA Route d) From the co mmand line interf ace (CLI) v ia the RS- 232 control port: fi ip list interfaces One[...]

4 • Basic Application Conf igurations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 112 DSLAM Connections with remote CPE units 3. Returning to the 3 086 Configuration Menu, cl ick on Conf iguration, th en IP Routes. Click on “Create new Ip V4 Route.” – Destination:0.0.0.0 – Gateway:192 .168.164.2 – Mask:0.0.0.0 –C o s t : 1[...]

113 Chapter 5 Specialized Configura tions Chapter cont ents IP Configurat ions ......... ............ ........... ........... ................. ........... ............ ........... ........... ..... ...... ................. ...........114 Router ... ............ ................. ........... ........... ........... ............ ................. ..[...]

5 • Speciali zed Con figurat ions Model 3086 G.SHDSL Integrated Access Devi ce User Guide 114 IP C onfi gur ations IP Configuratio ns Router RIP and RIPv2 Static Route 1. Click on > Configuration, then > IP Routes on the Configuration Menu. 2. On the main web page en titled “Edit Routes,” click on Create new Ip V4 Route . 3. Enter the d[...]

IP Conf igurat ions 115 Model 3086 G.SHDSL Integrated Access Device User Guide 5 • S peciali zed Con fig urations At the bottom o f the web page are thre e options for the D HCP Server Mo de: Disabled, DH CP server (default), and DH CP Relay Agent. 2. Clic k on Config ure on t he D HCP Ser ver w eb page to c han ge th e c onf igura tio n fo r any[...]

5 • Speciali zed Con figurat ions Model 3086 G.SHDSL Integrated Access Devi ce User Guide 116 IP C onfi gur ations 4. The IAD may be used as a DHCP Relay Agent if desi red. Go to > Configuration Menu > Configuration > DHCP Server. Se lect DHCP Relay Agent at the bo tt om of the w eb page and clic k on Config ure. The DHCP Relay agent pag[...]

IP Conf igurat ions 117 Model 3086 G.SHDSL Integrated Access Device User Guide 5 • S peciali zed Con fig urations DNS Relay Mo de In the DNS Relay we b page, up t o 10 DNS ser ver addre sses may be added to utilize the DNS servers already being use d by the net work. 1. Select Enab led . 2. Clic k on Conf igure . 3. Enter the D NS server add ress[...]

5 • Speciali zed Con figurat ions Model 3086 G.SHDSL Integrated Access Devi ce User Guide 118 IP C onfi gur ations[...]

119 Chapter 6 Security Chapter cont ents Introduction ....................... ........... ........... ............ ........... ........... ................. ............ ....... ......... ............ ........... .....120 Configuring the IAD ..................... ........... ............ ........... ........... ................. ............ ......[...]

6 • Security Model 3086 G.SHDSL Integrated Access Devi ce User Guide 120 Introduction Intr oduction Security provides the ability to setup and enforce se curity policie s. The policies define the typ es of traffic per - mitted to pass th rough a gateway, either inbound, outb ound, or both, and from whi ch origins the traffic may be allowed to ent[...]

Configuring the security interface s 121 Model 3086 G.SHDSL Integrated Access Device User Guide 6 • Security The next step in conf iguring the IAD is adding the default gateway route. Sinc e the WAN IP address of the 3086 mode m at the CO s ite is 192. 168.101.2, this wil l be the gat eway for th e 3086 mode m at the CPE s ite, the modem we are c[...]

6 • Security Model 3086 G.SHDSL Integrated Access Devi ce User Guide 122 Configuring the security interfaces 4. Add one more se curity interf ace by rep eating s tep 2. 5. Selec t Name of t he LAN p ort ( ip1 ) and Interface Type to be inte rnal . Click on Apply . Now the F irewall policies wi ll be added b etween the secur ity interfaces. O nly [...]

Enabling the Firewall 123 Model 3086 G.SHDSL Integrated Access Device User Guide 6 • Security Firewall Po licies: ID | Name | Type 1 | Type 2 | Validator Allow Only ------------------------------------------------------------------- 1 | item0 | external | internal | false ------------------------------------------------------------------- fi fir[...]

6 • Security Model 3086 G.SHDSL Integrated Access Devi ce User Guide 124 Security Tr iggers To allow pings betwe en the two PCs: 1. From the Configuration Menu, > Config uration > Security > Firewall Policy Configuration > Port Filters > Add Raw IP Filter 2. Enter 1 (fo r ICMP) in Transpo rt Type. 3. Both Inbound and Ou tbound shou[...]

Security Triggers 125 Model 3086 G.SHDSL Integrated Access Device User Guide 6 • Security After co nfiguring t he FTP po rtfilt er, you can open an ft p sessi on from Re mote to Local, however you c an issue ftp commands (e.g., login, cd, etc.) but transfer data (e.g., ls, dir, get, put commands). The port filter allo ws an ftp control channel bu[...]

6 • Security Model 3086 G.SHDSL Integrated Access Devi ce User Guide 126 Intrusion Detection System (IDS) Int rusio n Det ecti on S ystem ( IDS) The s ecuri ty fea ture i n the 3086 IAD p rovi des pr otect ion fr om a numbe r of attac ks. So me attac ks caus e a ho st to be blac klisted (i.e., no traffi c from that host is accepted under any circ[...]

Intrusion Det ection System (I DS) 127 Model 3086 G.SHDSL Integrated Access Device User Guide 6 • Security Sets the dur ation for blo cking all suspic ious hosts . The fire wall dete cts when the system is being scanned by a suspicious host attemp ting to identify any open ports. – Victim Pr otection B lock Duration:De fault = 60 0 seconds (10 [...]

6 • Security Model 3086 G.SHDSL Integrated Access Devi ce User Guide 128 Intrusion Detection System (IDS)[...]

129 Chapter 7 NA T (Network Address T ranslation) Chapter cont ents Introduction ....................... ........... ........... ............ ........... ........... ................. ............ ....... ......... ............ ........... .....130 Enabling NAT ................... ........... ................. ........... ........... ............ .[...]

7 • NAT (Network Address Transl ation) Model 3086 G.SHDSL Integrated Access Devi ce User Guide 130 Introduction Intr oduction The basi c step s for co nfigur ing NAT are : 1. Enable NAT betwe en the internal and external in terfaces of the fi rewall. 2. Create global addresses which will be added to the global pool of IP addresses on the WAN inte[...]

Introduction 131 Model 3086 G.SHDSL Integrated Access Device User Guide 7 • NA T (Network Address Translation ) Global address pool and rese rved ma p 1. Clic k on Adva nced NAT Configuration… on the web page, “Securi ty Interface Configuratio n.” 2. Click on the hyperlink Add Global Address Pool . The global IP addresses need to be created[...]

7 • NAT (Network Address Transl ation) Model 3086 G.SHDSL Integrated Access Devi ce User Guide 132 Introduction 6. Set the parameters to the following values: – Global IP Addr ess:1 00.100.100.101 – Internal IP address:10.1 .1.2 – Transpo rt Ty pe:a ll – Port Numb er:65 535(This p ort number means all po rt number s fo r TCP or UDP prot o[...]

133 Chapter 8 Monitoring Status Chapter cont ents Status LEDs. ............ ........... ................. ........... ........... ............ ........... ................. ........... .. ......... ............ ................134[...]

8 • Monitor ing Status Model 3086 G.SHDSL Integrated Access Devi ce User Guide 134 Status LEDs Status LEDs The LE Ds indic ate the s tatus of the Power , the WAN ( DSL) i nter-mode m link, Sync Se rial or T1/E1 por t, the Ethernet connection, and Status. All LED indica tors will pres ent the same looking profi le (e.g. , clear) when unlit due to [...]

135 Chapter 9 Diagnostics Chapter cont ents Introduction ....................... ........... ........... ............ ........... ........... ................. ............ ....... ......... ............ ........... .....136 Ping ................... ........... ............ ................ ............ ........... ........... ............ ........[...]

9 • Diagno stics Model 3086 G.SHDSL Integrated Access Devi ce User Guide 136 Introduction Intr oduction The Mo del 3086 o ffers th ree s ets of di agnostic s: Loc al Analog Loopback (serial port loop), Re mote Digital Loopback (DSL loop ), and T 1/E1 Loops f or th e Model 30 86/K. Some tests can be activate d physicall y from the front panel, or [...]

Operating Local Analog Loopback (LAL) —Serial Port Loop 137 Model 3086 G.SHDSL Integrated Access Device User Guide 9 • Di agno sti cs –N p i m a g e –K e y –I n i t b u n –I m . c o n f –T f t p u p d t . r b t –T f t p u p d t . e n d –S c r i p t . b a t 2. Connect the co ntrol (console ) port of the unit to a PC. 3. Connect the[...]

9 • Diagno stics Model 3086 G.SHDSL Integrated Access Devi ce User Guide 138 T1/E1 Di agnostics keyboard of the local terminal will appear on the local terminal screen after having been passed to the re mote Model 308 6 and looped back) . See Figure 13 . Figure 13. Remo te Digital Loop To perform an RDL test, follow these s teps: 1. Activate the [...]

T1/E1 Diagnostics 139 Model 3086 G.SHDSL Integrated Access Device User Guide 9 • Di agno sti cs To set the 3086 T1/E 1 port in Ne twork Lo opback te st, do the follow ing: 1. Go to the 3086 Main page, select E1/T1 . Next, click on Test Modes , select networ k Loop usi ng th e drop down me nu, clic k on the Activate T est M ode butt on. 2. Perform[...]

9 • Diagno stics Model 3086 G.SHDSL Integrated Access Devi ce User Guide 140 T1/E1 Di agnostics 1. Go to the 3086 Main page, select E1/T1 . Next, click on Test Modes , sel ect local Loo p using the d rop down menu, click on the Activate T est Mod e button. 2. Perform a BE R (bit erro r rate) test. Thi s test can be initiated fro m the far e nd us[...]

T1/E1 Diagnostics 141 Model 3086 G.SHDSL Integrated Access Device User Guide 9 • Di agno sti cs T1/E1 connection Status The 3086 E 1/T1 status p age disp lays a number of al arms condit ions, Transc eiver stat us, and st atistics . The infor matio n displ ayed in this pa ge is of use for monitor ing and troubl eshoo ting ne twork pr oblem s when [...]

9 • Diagno stics Model 3086 G.SHDSL Integrated Access Devi ce User Guide 142 BIT Error R ate (V.52) Diagnostics BIT Error Rate (V .52) Diagnostics The Mode l 3086 off ers a V.52 Bit Error Rat e (BER) 511 t est pat tern. This test patt ern may be invoked along with the LAL and RDL test s to eval uate the uni t(s) and th e DSL communicati on links.[...]

143 Chapter 10 Contacting Patton for assistance Chapter cont ents Introduction ....................... ........... ........... ............ ........... ........... ................. ............ ....... ......... ............ ........... .....144 Contact information...................... ................. ........... ............ ........... ......[...]

10 • Cont acting Pa tton for a ssistan ce Model 3086 G.SHDSL Integrated Access Devi ce User Guide 144 Introduction Intr oduction This chapte r contains t he foll owing info rmation: • “Contact information” —des cribes how to c ontact PATTON tec hnical support fo r assistance. • “Warranty Service and Returned Merch andise Authorizati o[...]

Warranty Service and Returned Merch andise Authorizations (RMAs) 145 Model 3086 G.SHDSL Integrated Access Device User Guide 10 • Contac ting Pat ton for assista nce Return for cr edit policy • Less than 30 days: No Charge. Your credit will be issu ed up on rec eip t and i nspe cti on of the e qui pment . • 30 to 60 days: We will add a 20 % re[...]

10 • Cont acting Pa tton for a ssistan ce Model 3086 G.SHDSL Integrated Access Devi ce User Guide 146 Warr anty Service and Returned Merchandise Authori zations (RMAs)[...]

147 Appendix A Compliance information Chapter cont ents Compliance ....... ........... ............ ................ ............ ........... ........... ............ ................. ........ ... ........... ........... ...........148 EMC ........... ........... ............ ................ ............ ........... ........... ................. [...]

Compl iance 14 8 Model 3086 G.SHDSL Integrated Access Device User Guide A • C omplianc e info rmation Complia nce EMC • FCC Pa rt 1 5, Cl ass A • EN55022, Clas s A • EN55024 Safety • UL60950-1 /CSA C22.2 No. 60950-1 • IEC/EN 60950 -1 • AS/NZS 60950- 1 PSTN Re gulator y • FCC Pa rt 6 8 • CS-03 • AS/ACIF S043 Radio and T V Inter f[...]

Authorized European Representative 149 Model 3086 G.SHDSL Integrated Access Device User Guide A • C omplianc e info rmation Authorized Eur opean R epresentative D R M Green European Co mpliance Ser vices Limited. Avalon House, Marcham Road Abingdon , Oxon OX14 1UD, U K FCC Pa rt 68 (A CT A) S tatement This equipme nt complies with P art 68 of FCC[...]

Industry Canada N otice 150 Model 3086 G.SHDSL Integrated Access Device User Guide A • C omplianc e info rmation some si tuations. Re pairs t o some c ertifie d equi pment sh ould be made by an authori zed maintenance facility designated by the supplier . Any repairs o r alterations mad e by the user to th is equipmen t, or equipment m al - funct[...]

151 Appendix B Specifi cations Chapter cont ents General Character istics .................. ................. ........... ............ ........... ........... ................. ....... .... ............ ........... .....152 G.SHDSL Characterist ics .................... ................. ........... ........... ............ ........... ............[...]

B • Specif icati ons Model 3086 G.SHDSL Integrated Access Devi ce User Guide 152 General Chara cteristics General Characteristic s • Compact low-cost plug and play IAD • 10/100 Etherne t • Unlimited h ost suppor t. • Com prehens ive har dware diag nostics , works with any op erating system , easy m aintenan ce and eff ortless installation[...]

Sync Serial Interface 153 Model 3086 G.SHDSL Integrated Access Device User Guide B • Specif icati ons Sync Serial Interface • ITU X.21 or V.35 interf ace • Available with Female M34, DB-25, and DB-15 connecto rs • User configurable DTE/DC E for X.21 T1/E1 In terface (30 86/RIK and RIT mo dels only) • Line Rate 1.54 4 Mbps (T1), and 2.048 [...]

B • Specif icati ons Model 3086 G.SHDSL Integrated Access Devi ce User Guide 154 PPP Support • uPNP control led de vice fo r seamle ss netw orked de vi ce int erconnectiv ity and Windows XP integrat ion. • IGMPv2 Proxy support (RFC 22 36). • Frame Relay with Annex A/D/LMI, RFC 1490 MpoFR and FRF.12 Fragmentat ion. PPP Sup por t • Point-to[...]

Security 155 Model 3086 G.SHDSL Integrated Access Device User Guide B • Specif icati ons Secu rity • Packet filt ering fir ewall fo r cont rolled acces s to and from LAN/WAN. S upport for 25 5 rule s in 3 2 fil ter set s. 16 indivi dual connection prof iles. • DoS Dete ction/protection. Intr usion detection, Lo gging of session, bl ocking and[...]

B • Specif icati ons Model 3086 G.SHDSL Integrated Access Devi ce User Guide 156 Power and Po wer Supply Specifications • Fuse rating: 250 Volt s, 400 mA, time delay Connect the equipment to a 36–60 VDC source that is electri - cally isolated from the AC source. The 36–60 VDC source is to be reliably connected to earth .[...]

157 Appendix C Cable Recommendations Chapter cont ents DSL Cable............... ........... ........... ................. ........... ............ ........... ................. ........... .. ......... ................. ...........158 Ethernet Cab le ................... ........... ........... ............ ................. ........... ........... [...]

C • Cable Recomme ndations Model 3086 G.SHDSL Integrated Access Devi ce User Guide 158 DSL Cable DSL Cabl e 10 foot (3 m), RJ-11/RJ-11 (refer to “RJ-11 non-shielded port” on page 160 ) Ethernet C able Ethern et cable ( P/N 10- 2500) (r efer t o “RJ-45 s hield ed 10/100 E thernet port” o n page 160) Adapter EIA-561 t o DB-9 (P /N 16F-561) [...]

159 Appendix D Physical Connectors Chapter cont ents RJ-45 shiel ded 10/100 Et hernet port .............. ........... ............ ........... ........... ................. ........... ..... ....... ........... .....160 RJ-11 non-shi elded port ................ ................. ........... ............ ........... ........... ............ ........[...]

D • Physical Con nectors Model 3086 G.SHDSL Integrated Access Devi ce User Guide 160 RJ-45 shielded 10/100 Ethernet port RJ-45 sh ielded 10/100 Ethernet por t Assuming the MD I-X switch is in the out pos ition. RJ-11 non-sh ielded port Single twisted-pai r (TP) for full-duplex transm issi on. The s ignals a re not pol arity se nsitive. RJ-45 no n[...]

Serial port 161 Model 3086 G.SHDSL Integrated Access Device User Guide D • Phy sica l Co nnect ors Serial port V. 3 5 ( M / 3 4 C o n n e c t o r ) V . 35 (DB-25 F emale Co nnector ) Pin # Signal A GND (Earth Ground/S hield) B SGND (Signal Ground) D CTS (DCE Source ) E DSR (DC E Source, Alway s On) F CD (D CE Source ) L LL (Local L oop, DTE S our[...]

D • Physical Con nectors Model 3086 G.SHDSL Integrated Access Devi ce User Guide 162 Pow er inp ut X.21 (DB- 15 Connector) E1/T1 (RJ -48C Co nnector ) Power input IEC 320 co nnector (two pr ong). 14 TD/(Transmit Data-A, DT E Source) 15 TC(Transmitter Clock-B, DC E Source) 16 RD (Re ceiv e Data- A, DCE Source ) 17 RC (Receiv er Clock-A, D CE Sour [...]

163 Appendix E Comma nd Line Inter face (CLI) Operati on Chapter cont ents Introduction ....................... ........... ........... ............ ........... ........... ................. ............ ....... ......... ............ ........... .....164 CLI Terminology ............... ................. ........... ........... ............ .......[...]

E • Command Line Interfac e (CLI) Operation Model 3086 G.SHDSL Integrated Access Devi ce User Guide 164 Introduction Intr oduction The modem configuration and status ca n al so be view and m odified through the consol e, which is acc essible through the RS-232 seri al port o r through a Telne t sessio n over Ether net. CLI T ermi nology In order [...]

CLI T ermi nolo gy 165 Model 3086 G.SHDSL Integrated Access Device User Guide E • Command Line Interface (CLI) Operati on Using the Console The cons ole c ommands neede d for the v ario us modes o f operatio n are des cribed in l ater sections . In this sub - section are the most basi c command s n eed ed fo r cons ol e oper at ion. By entering ?[...]

E • Command Line Interfac e (CLI) Operation Model 3086 G.SHDSL Integrated Access Devi ce User Guide 166 Adminis teri ng us er accoun ts clear list Æ ip interface ip1 list ? secondaryipaddresses Æ ip interface ip1 list secondaryipaddresses ? ip interface ip1 list secondaryipaddresses <enter> Secondary IP addresses for interface: ip1 ID | I[...]

Administ ering user acco unts 167 Model 3086 G.SHDSL Integrated Access Device User Guide E • Command Line Interface (CLI) Operati on Enter the new pas sword tw ice as prompt ed: Enter new password: *** Again to verify: *** fi Note No chec k is made fo r any current passwor d which may have been set for the us er. If you wi sh to change the pass [...]

E • Command Line Interfac e (CLI) Operation Model 3086 G.SHDSL Integrated Access Devi ce User Guide 168 Adminis teri ng us er accoun ts Example: To read t he attr ibute ‘Versio n’: gshdsl show Version To set da ta rate to 256K (4 * 64K): gshdsl set DSLRateTS To set ter minal type to CPE mode : gshdsl set terminal remote To s how the c urr en [...]

Administ ering user acco unts 169 Model 3086 G.SHDSL Integrated Access Device User Guide E • Command Line Interface (CLI) Operati on Default Setting of the unit Termin al: Remot e Interface: Hdlc DataRateN: 24 DataRateI: 0[...]

E • Command Line Interfac e (CLI) Operation Model 3086 G.SHDSL Integrated Access Devi ce User Guide 170 Adminis teri ng us er accoun ts[...]

171 Appendix F Inter working Functions Infor mation Chapter cont ents Introduction ....................... ........... ........... ............ ........... ........... ................. ............ ....... ......... ............ ........... .....173 Frame Relay Local Man agement Interface ....................... ........... ............ ..........[...]

F • Inte rworki ng Func tions In forma tion Model 3086 G.SHDSL Integrated Access Devi ce User Guide 172 Understandi ng the Channel Level View .................... ................. ........... ........... ........... ............ ........ ... .....186 Set Configurat ion Variables associated wit h the Channels ............... ............ ........[...]

Introduction 173 Model 3086 G.SHDSL Integrated Access Device User Guide F • Inte rworking Functio ns Info rmatio n Intr oduction This append ix describe s the Frame Relay Interwor king functio ns (IWF) that are available on th e Model 3086. The fol lowing inf ormatio n descri bes how to use and op erate th e follo wing Frame Re lay Interwo rking [...]

F • Inte rworki ng Func tions In forma tion Model 3086 G.SHDSL Integrated Access Devi ce User Guide 174 Frame Relay Local Management In terface • 933A_Network : The ITU Q.933 proto col will be used . The unit will op erate as the Networ k side of the connection • 933A_User: The ITU Q.93 3 protoco l will be used. The uni t will operate as the [...]

Frame Relay Local Management Interface 175 Model 3086 G.SHDSL Integrated Access Device User Guide F • Inte rworking Functio ns Info rmatio n CLI Co nfigu rat ion Me thods The fol lowing de scri bes how to c onfigure the LMI us ing the CLI. Al l LMI comma nds are co ntained unde r the “lmi” directive of the CLI interface. The following options[...]

F • Inte rworki ng Func tions In forma tion Model 3086 G.SHDSL Integrated Access Devi ce User Guide 176 Frame Relay Service Interworking (FRF.8) W eb Configu rat ion Metho ds The follow ing describes how to configure the L MI using the web inter face. All LMI confi guration variabl es are contained under the “LMI Manageme nt” window found thr[...]

Frame Relay Service Inte rworking (FR F.8) 177 Model 3086 G.SHDSL Integrated Access Device User Guide F • Inte rworking Functio ns Info rmatio n • Always_one : – Frame Relay: All F rame Relay packets will have the D E field in the heade r set to a constant value of 1. – ATM: All ATM cells will have the C LPI field set to a constant value o [...]

F • Inte rworki ng Func tions In forma tion Model 3086 G.SHDSL Integrated Access Devi ce User Guide 178 Frame Relay Service Interworking (FRF.8) specif ication. Se e figure 16 fo r the encaps ulation types and includes an exam ple where a Rou ted IP packe t is receiv ed on both the Fr ame Relay and ATM s ides of the co nnection. Wh en the packet [...]

Frame Relay Service Inte rworking (FR F.8) 179 Model 3086 G.SHDSL Integrated Access Device User Guide F • Inte rworking Functio ns Info rmatio n The Frame Relay Serv ice I nterworki ng functio ns on the Patt on Electroni cs Model 3 086FR are also def ined as sixty-four channels. Each channel cr eates a connectio n between a single DLCI on the F r[...]

F • Inte rworki ng Func tions In forma tion Model 3086 G.SHDSL Integrated Access Devi ce User Guide 180 Frame Relay Service Interworking (FRF.8) Note After the fi rst several le tters of the c ommand are typed pressing the Ta b key will tell the system to comple te the variable or command name . The frs set group command allows the user to setup [...]

Frame Relay Service Inte rworking (FR F.8) 181 Model 3086 G.SHDSL Integrated Access Device User Guide F • Inte rworking Functio ns Info rmatio n “Group #” column al ong the l eft side of the screen is a hyperl ink that wi ll br ing up detai led configur ation information about each group and the channels available in the group. Group/C hannel[...]

F • Inte rworki ng Func tions In forma tion Model 3086 G.SHDSL Integrated Access Devi ce User Guide 182 Frame Relay Network In terworking (FRF.5) Figure 18. FRF.8 Channel Lev el Configuration Screen Figure 19. FRF.8 Channel Level P acket Information Frame Rela y Network Interworking (F RF .5 ) Frame Relay Networking Interw orking (FRF.5) is a con[...]

Frame Relay Network Interworking (F RF.5) 183 Model 3086 G.SHDSL Integrated Access Device User Guide F • Inte rworking Functio ns Info rmatio n Port Level Configuration Options: Ports are us ed to define the lo wer level I nterworking Fu nctions. The port configuration will def ine the follow - ing v ariable s: • VPI— Virtual Path Ide ntifi e[...]

F • Inte rworki ng Func tions In forma tion Model 3086 G.SHDSL Integrated Access Devi ce User Guide 184 Frame Relay Network In terworking (FRF.5) • FRS stat e: The state variable allows the user to enable or di sable t he port for op erati on. No te t hat port level configuration variables are not changeable “on the fly”. If it is re quired[...]

Frame Relay Network Interworking (F RF.5) 185 Model 3086 G.SHDSL Integrated Access Device User Guide F • Inte rworking Functio ns Info rmatio n – not acti ve: No inf ormation has been received from the management port related to this channel CLI Configu ration Methods f or Po rt Le vel Ma nageme nt The follow ing information c an be used to con[...]

F • Inte rworki ng Func tions In forma tion Model 3086 G.SHDSL Integrated Access Devi ce User Guide 186 Frame Relay Network In terworking (FRF.5) FRN Rx Packets: 145/0 FRN Network Mgt: lmi_both FRN Net Mgt State: port_mgt_UP Channel Level Information: --------------------------------------------------------------------- |Chn1 |DLCI|Net DLCI|Activ[...]

Frame Relay Network Interworking (F RF.5) 187 Model 3086 G.SHDSL Integrated Access Device User Guide F • Inte rworking Functio ns Info rmatio n must f irst def ine th e port num ber th at is bein g conf igure d and th en the cha nnel n umber that is b eing co nfig - ured. Th e follo wing chart shows how t he port s and channels are vi ewed by the[...]

F • Inte rworki ng Func tions In forma tion Model 3086 G.SHDSL Integrated Access Devi ce User Guide 188 Frame Relay Network In terworking (FRF.5) Once “FRN Setup (FRF.5)” is selected the Port L e vel Overvie w screen is displayed as s hown belo w. The s cree n give s an ov ervi ew of t he FR N connec tio ns th at are availabl e. Each Port Num[...]

Frame Relay Network Interworking (F RF.5) 189 Model 3086 G.SHDSL Integrated Access Device User Guide F • Inte rworking Functio ns Info rmatio n Channe l Level Informa tion Screen The Channel Level co nfiguration section of the screen al lows the user to s etup and configure the in dividual channels asso ciated with the spec ified port. No te that[...]

F • Inte rworki ng Func tions In forma tion Model 3086 G.SHDSL Integrated Access Devi ce User Guide 190 Frame Relay (Ethernet Based) Operations Frame Relay (Ethernet Based) Operations Ethernet based (or basic) F rame Relay is also available within the Patto n Electronics Model 3086. Thi s Frame Relay serv ice can be used in a similar f ashion to [...]

Frame Relay (Ethernet B ased) Operations 19 1 Model 3086 G.SHDSL Integrated Access Device User Guide F • Inte rworking Functio ns Info rmatio n • Port: This variable defines the low layer port that will be used to transport data across the frame relay inter - face. For routed application the “frf” port should be us ed. For bridged applicati[...]

F • Inte rworki ng Func tions In forma tion Model 3086 G.SHDSL Integrated Access Devi ce User Guide 192 Serial Interface Configuration W eb Based Conf igu ratio n of th e Frame Relay Ch annel This secti on defines the configuratio n of the Frame Re lay Service thr ough the web interface. The Frame Relay channel is c reated thro ugh th e Configura[...]

Serial Interface Configuration 193 Model 3086 G.SHDSL Integrated Access Device User Guide F • Inte rworking Functio ns Info rmatio n CLI Co nfigu rat ion Me thods The follow ing section defines ho w to configure th e serial interface using the CLI. All serial in terface functions are available under the “serial” d irective of the CL I. Set co[...]

F • Inte rworki ng Func tions In forma tion Model 3086 G.SHDSL Integrated Access Devi ce User Guide 194 Ping an d Trace Route > serial rxClkInv: > Allows the user to invert the clock source > options: normal - use normal clock > inverted - use the inverted version of the clock > serial txSamplePoint: > Determines whether the TxD[...]

Ping and Trace Route 195 Model 3086 G.SHDSL Integrated Access Device User Guide F • Inte rworking Functio ns Info rmatio n T race Route fro m the CLI Interface The Trace Ro ute feature is also available from the “ip” directiv e in the CLI inter face. There are three co m - mands available as s hown below: Define Usage: “ip tracero ute” Af[...]

F • Inte rworki ng Func tions In forma tion Model 3086 G.SHDSL Integrated Access Devi ce User Guide 196 Backup a nd Restore Features Ping and traceroute fr om the web interface: Both the Ping and Traceroute features are avail able from the web interface on the Model 3086. The following screen c apture show the output of a ping command that was in[...]