Pelco C636M-F manual

DX9100 Series Digital V ideo Recorder and DX9100 V iewstation C636M-F (3/09) ® INST ALLA TION[...]

2 C636M-F (3/09) CONTENTS Section Page IMPORT ANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 REGULA TORY NOTICES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

C636M-F (3/09) 3 DVR MANAGEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 DA T A TRANSLA TOR CONNECTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

4 C636M-F (3/09) LIST OF ILLUSTRA TIONS Figure Page 1. DX9100 System Overview ....................................................................................................... ......................................................................... 9 2. Front View of Recorder ..................................................................[...]

C636M-F (3/09) 5 56. I/O Ports Driver Dialog Box ................................................................................................. ............................................................................ 46 57. Alarm Modes/Relay Intervals Dialog Box ................................................................................[...]

6 C636M-F (3/09) LIST OF TABLES T able Page A. Server State Symbols ......................................................................................................... ............................................................................. 34 B. Channel Setup ..............................................................................[...]

C636M-F (3/09) 7 IMPORT ANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’ s instructions. 8. Do not install n[...]

8 C636M-F (3/09) REGULA TORY NOTICES DX9100DVR Series This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RADIO AND TELEVISION[...]

C636M-F (3/09) 9 Figure 1. DX9100 System Overview DESCRIPTION The DX9100 system consists of at least one digital video recorder (DVR) and one viewstation. The DX9100 digital video recorder has these features: • 16 video inputs • Internal hard disk storage drive • Compatibility with existing DX9000 recorders with C1.1 software • Compatibilit[...]

10 C636M-F (3/09) MODELS DX9100VSR Viewstation; rack mountable DX9116H-500 Digital video recorder; records at 7.5 or 15 images per second (ips) at CIF resolution; 500 GB internal storage DX9116H-750 Same as the DX9116H-500 except has 750 GB internal storage DX9116H-1000 Same as the DX9116H-500 except has 1,000 GB internal storage DX9116H-1250 Same [...]

C636M-F (3/09) 11 FRONT VIEW (RECORDER)  Power LED  HDD (Hard Disk Drive) LED  Handle (2)  Rack Ear (2)  Fan V entilation  Lock (2 Keys Supplied)  Power Button  Fan (2) Figure 2. Front View of Recorder        [...]

12 C636M-F (3/09) In Out 12 In Out 3 45 67 8 91 0 11 12 13 14 15 16 Term Loop 14 75 HI-Z Term Loop 91 2 75 HI-Z Term Loop 58 75 HI-Z Term Loop 13 16 75 HI-Z AUDIO INPUTS 15 9 1 3 2 6 10 14 37 1 1 1 5 4 8 12 16 Rel Alarm Inputs Rel Alarm Inputs 11 2 3 4 5 6 7 8 Com 2 9 1 01 11 21 31 41 51 6C o m            ?[...]

C636M-F (3/09) 13 FRONT VIEW (VIEWST A TION)  Power LED  HDD (Hard Disk Drive) LED  Key Lock (2 Keys Supplied)  Fan V entilation  Handles  Rack Ears  Fan  Power Button  DVD-RW/CD-RW  3.5-Inch Floppy Drive Figure 4. Front View of Viewstation          [...]

14 C636M-F (3/09) BACK VIEW (VIEWST A TION)  Power Input (100-240 V AC)  PS/2 Connectors (Keyboard/Mouse)  Secondary RJ-45 Network Connector  USB Ports  RS-232 Connector (COM 1)  Parallel Port  VGA Connector  Primary RJ-45 Network Connector  Audio Inputs (Line In, Line Out/Headphone, Microphone In)  VGA Connector ?[...]

C636M-F (3/09) 15 INST ALLA TION Make sure all parts are present for each unit. Recorder 1 Recorder 2 Power cords (1 USA standard and 1 European standard) 2 Brackets 6 Screws, 8-32 x .250-inch, pan head 2 Rack ears 4 Screws, 10-32 x .250-inch, flat head 4 Screws, 10-32 x .750-inch, Phillips, pan head with washers 2 Rear mounting rails 8 Screws, 10-[...]

16 C636M-F (3/09) INST ALLA TION GUIDELINES Follow these guidelines for the best system performance. • The DX9100 recorders require connection to an uninterruptible power supply (UPS) to ensure no corruption of data during a power loss. • The DX9100 system must be installed in a climate-controlled room. The temperature range should be 41 ° to [...]

C636M-F (3/09) 17 MOUNTING The DX9100 recorder and viewstation are supplied with the necessary parts for mounting into an industry standard 19-inch (48.26 cm) wide equipment rack. The units can also be placed on a flat surface, such as a shelf. CAUTION: The units should be installed in an air -conditioned room where the temperature is maintained be[...]

18 C636M-F (3/09) Figure 6. DX9100 Rack Mount Installation T o install the unit into an equipment rack: 1. Attach the two brackets to both sides of the unit. 2. Attach the mounting rails to the equipment rack. 3. Place the unit onto the mounting rails. It should slide in and out of the rack easily . 4. Fasten the rack ears to the equipment rack. RA[...]

C636M-F (3/09) 19 CONNECTIONS Refer to Figure 8. 1. Connect the viewstation to the recorder via an Ethernet switch. Use shielded network cables. NOTE: Use a shielded cable, similar to Belden 1533P , that meets or exceeds the support requirements for ANSI/TIA/EIA 568B.2 Cat 5e. 2. Connect a monitor , keyboard, and mouse to the viewstation. 3. Connec[...]

20 C636M-F (3/09) Figure 8. System Connections T erm Loop 75 HI-Z 1 4 RECORDER POWER CONNECTION FOR FUTURE USE RS-232 CM9760-REL CM9760-ALM CM9760-DT HASP KEY (INTO THE BOTTOM RIGHT USB PORT) MAXIMUM OF 16 CAMERA INPUTS (VIDEO IN) LOOPING VIDEO SOURCE (VIDEO OUT) VIEWST A TION RJ-45 STRAIGHT CABLES POWER CONNECTION 10/100/1000 BASE-T ETHERNET INTER[...]

C636M-F (3/09) 21 WIRING ALARMS AND RELA YS The DX9100 provides 16 alarm inputs and two relay outputs. Each alarm input and relay output can be matched to a video input. For example, alarm input 5 can match video input 3 and relay 1. Y ou can connect wires from the sensors to the respective alarm inputs on the connectors on the back panel of the DX[...]

22 C636M-F (3/09) POWER UP THE EQUIPMENT After you make all of the connections, turn on the recorder first and then the viewstation. The recorder applications start automatically . There are four applications that should be running in order for the recorder to work: • SQL Server Service Manager ( appears in system tray) • Server Attendant • R[...]

C636M-F (3/09) 23 PROGRAMMING VIEWST A TION NETWORK CONFIGURA TION After you make all connections, you have to configure the viewstation to work on the network. T o configure the viewstation, you need the following information. Y ou can obtain this information from your network administrator . • Unique viewstation name: (Examples are Pelcovs1, Pe[...]

24 C636M-F (3/09) CHANGING THE VIEWST A TION’S IDENTIFICA TION T o change the default computer name or workgroup: 1. Close all windows on the viewstation desktop. 2. Right-click My Computer and then go to Properties. 3. Click the Network Identification tab. The following page appears. Figure 10. Viewstation Network Identification Page 4. Click Pr[...]

C636M-F (3/09) 25 CHANGING THE VIEWST A TION’S IP ADDRESS AND SUBNET MASK T o change the viewstation’ s IP address: 1. Close all windows on the viewstation desktop. 2. Right-click My Network Places and then go to Properties. The following window appears. Figure 12. Viewstation Network Connections Window 3. Double-click Local Area Connection. Th[...]

26 C636M-F (3/09) Figure 14. Viewstation Local Area Connection Properties Dialog Box 5. Make sure the “Show icon in taskbar when connected” checkbox is selected. 6. Double-click Internet Protocol (TCP/IP). The following dialog box appears. Figure 15. Viewstation Internet Protocol (TCP/IP) Properties Dialog Box 7. Enter the IP address (for examp[...]

C636M-F (3/09) 27 CHANGING THE RECORDER’S IDENTIFICA TION The recorder name has been preset during manufacturing. The default name is Pelco1. Changing the recorder’ s name should be done through the Server Identification dialog box only . 1. Close all applications on the recorder . 2. Double-click the DX9000 Server Configuration Utility icon on[...]

28 C636M-F (3/09) TIME SYNCHRONIZA TION All equipment in your system must have the same time. Pelco recommends you select all recorders as time synchronization recorders. Creating this chain ensures that the system will maintain the correct time in case one or more recorders fail. All recorders and viewstations must belong to the same workgroup or [...]

C636M-F (3/09) 29 SETTING DA TE/TIME PROPERTIES Follow these steps to set the Date/T ime Properties on the recorder and the viewstation. Make sure you close all applications on the recorder and viewstation. 1. Double-click the time on the system tray . The following page appears. Figure 18. Date & Time Page 2. Set the date and time and then cli[...]

30 C636M-F (3/09) CLIENT CONFIGURA TION UTILITY NOTE: Make sure the DX9000 Viewstation application is closed before opening the Client Configuration Utility . Y ou can do the following with this utility: • Synchronize the time between the recorder and the viewstation • Identify all the recorders that interface with the viewstation • Set the D[...]

C636M-F (3/09) 31 Figure 22. Export to Server Dialog Box 7. Select “Export to server .” 8. Select the name of the first recorder from the drop-down box. 9. Click Configure. NOTE: Y ou must repeat steps 8 and 9 for each recorder that is in the drop-down box. 10. Click Close. 11. Refer to Step 8 of the Recorder Initialization Options section to c[...]

32 C636M-F (3/09) RECORDER INITIALIZA TION OPTIONS T o set the recor der initialization options, you must open the DX9000 Server Configuration Utility . 1. Double-click the DX9000 Server Configuration Utility icon on the desktop. 2. Set the “Frame rate & resolution” from the drop-down box. The default is CIF , Half, which is 15 ips at CIF r[...]

C636M-F (3/09) 33 4. Enter the “Multicast group.” This number is based on the recorder’ s IP address. For example, if the IP address is 100.0.0.101, then the multicast group number should be 239.0.0.101. The last three numbers should match. 5. Enter the Multicast TTL number (1-20). This is the number or routers, if any , which separate the re[...]

34 C636M-F (3/09) Figure 26. Server State 2. Select “All servers” to run the test on all recorders or “Server” to run the test on a specific recorder . 3. Click Configure. SERVER ST A TE The Server State utility checks the status of the recorders that are connected to the viewstation. It verifies if a recorder is recording, not recording, o[...]

C636M-F (3/09) 35 Figure 27. Configuration Options 4. Select the refresh interval. The recommended setting is 60 seconds. Any setting less than 60 seconds will become network intensive because the viewstation constantly polls the recorders. 5. Click OK. 6. Check the “Auto-refresh” checkbox. The application checks the refresh interval when you c[...]

36 C636M-F (3/09) ADV ANCED RECORDER OPTIONS T o set the advanced r ecorder options, you must open the DX9000 Server Configuration Utility . Double-click the DX9000 Server Configuration Utility icon on the desktop. The Server Configuration Utility dialog box appears with the Advanced Options section. Figure 30. Database Backup and Repair Confirmati[...]

C636M-F (3/09) 37 DA T ABASE RESTORA TION The following procedure explains how to restore a database that has been backed up. 1. Close all recorder applications. 2. Go to the system tray . Figure 31. System Tray 3. Double-click the SQL server icon. The following window appears. Figure 32. Server Service Manager Window 4. Click Stop. The following d[...]

38 C636M-F (3/09) 6. Click Y es. Start/Continue is enabled after several seconds. NOTE: The SQL Server Agent will be stopped also. It must be restarted later in the procedure. Figure 35. Start/Continue Window 7. Exit the window . 8. Double-click the recorder name icon on your desktop. The following window appears. Figure 36. My Computer Window[...]

C636M-F (3/09) 39 9. Go to D:Databases. The following window appears. Figure 37. Databases Window 10. Rename MSSQL to MSSQL_old. Figure 38. Rename MSSQL[...]

40 C636M-F (3/09) 11. Go to C:Copy of D DriveDatabases. The following window appears. Figure 39. C Drive Databases Window 12. Copy the MSSQL folder and paste it to D:Databases. Figure 40. MSSQL Folders 13. Delete MSSQL_old. NOTE: Remember to delete it from your recycle bin also.[...]

C636M-F (3/09) 41 14. Double-click the SQL server icon. The following window appears. Figure 41. Start/Continue Window 15. Select SQL Server Agent from the Services drop-down box. 16. Click Start/Continue. Stop is enabled and the status is Running after several seconds. 17. Select SQL Server from the Services drop-down box. 18. Exit the window . 19[...]

42 C636M-F (3/09) Figure 43. Explorer Windows 22. Drag the database backup file to C:AvServerConfigavRestoreDBR2. The following dialog box appears. Figure 44. Restore Utility Dialog Box 23. Go to the system tray . Figure 45. System Tray[...]

C636M-F (3/09) 43 24. Double-click the SQL server icon. The following window appears. Figure 46. Server Service Manager Window 25. Click Stop. The following dialog box appears. Figure 47. Stop SQL Dialog Box 1 26. Click Y es. The following dialog box appears Figure 48. Stop SQL Dialog Box 2 27. Click Y es. Start/Continue is enabled after several se[...]

44 C636M-F (3/09) 28. Select SQL Server Agent from the Services drop-down box. 29. Click Start/Continue. Stop is enabled and the status is Running after several seconds. 30. Select SQL Server from the Services drop-down box. 31. Exit the window . Figure 50. Replace Database Dialog Box 32. Click OK. The following dialog box appears. Figure 51. Resto[...]

C636M-F (3/09) 45 Figure 54. Finished Scan Dialog Box 39. Select “Merge files not found on Database” to create new records on the database for the video files that were detected. 40. Select “Delete database records not found on Disk” to delete records on the database that do not have any video files. 41. Click Normalize to merge files and d[...]

46 C636M-F (3/09) CONFIGURING ST ANDARD ALARM AND RELA Y PROPERTIES In the I/O Handler dialog box, you can define the correct driver to support the external devices. The recorder is already configured to support its built-in I/O ports. If you need to configure the recorder to support different settings or external devices, use the I/O Handler . The[...]

C636M-F (3/09) 47 CAMERA RECORDING PROPERTIES Camera recording properties should be set by the system administrator during installation. Only system administrators and operators with a Level 1 authorization can set or change camera recording properties. T o set or change camera recording properties, you must open the DX9000 Viewstation application.[...]

48 C636M-F (3/09) Figure 59. Select Channel Dialog Box 3. Select a channel. 4. Select the Preview checkbox, as shown below , to verify that you have the correct camera. Figure 60. Continuous Recording Schedule Page 2. Click “Select channel” to display a list of recorders. An example is shown below .[...]

C636M-F (3/09) 49 CONTINUOUS RECORDING SCHEDULE 1. Select the “Continuous recording” radio button. (This is the default setting and should already be selected the first time you select a channel.) Refer to Figure 60. 2. Click Apply . Recording is done at all times and no schedule is defined. The entire daily and weekly recording schedules are m[...]

50 C636M-F (3/09) Figure 62. Daily Event Recording Page If you select event recording, the DX9100 actually records continuously . The difference between continuous and event recording is the way the video is saved in the database. When the hard drives are full, the DX9100 starts overwriting the oldest video. With continuous recording, the DX9100 ov[...]

C636M-F (3/09) 51 WEEKL Y RECORDING SCHEDULE NOTE: T o make sure there is no delay during scheduled recording, begin the recording at least five minutes before the actual recording time. For example, schedule a recording at 7:55 a.m. instead of 8:00 a.m. 1. Select the “Weekly recording schedule” radio button. 2. Click Continuous or “Event rec[...]

52 C636M-F (3/09) MOTION DETECTION 1. Click the DVMD tab. The DVMD page appears. Refer to Figure 65. 2. Select the “Detector on” radio button. 3. Select the Preview checkbox. The video has blue squares over the entire area meaning the entire video has been selected for motion detection. 4. Click “Clear all” to remove all of the boxes or cli[...]

C636M-F (3/09) 53 CHANNEL SETUP This section describes how to set camera properties to get the best picture. 1. Click the Video tab. The V ideo page appears. Refer to Figure 66. 2. Select the Preview checkbox to see the video quality with the default settings. 3. Adjust the video quality by dragging the triangles on the slider bars to the desired v[...]

54 C636M-F (3/09) Table B. Channel Setup Parameter Description/Action Channel Name Enter a new name for this channel. Y ou can enter up to 20 characters. Brightness Drag the triangle to change the brightness value. The higher the value, the higher the bit rate. The previous value is displayed to the right of the brightness bar . Contrast Drag the t[...]

C636M-F (3/09) 55 DEFINING USERS Only system administrators can define user names and passwords for the DX9100 Viewstation. Other users tr ying to access this option will get the following message: Figure 67. User Access Dialog Box This option allows an administrator to add, delete, and change the properties of users in the DX9100 system. There are[...]

56 C636M-F (3/09) Table C. User Access Rights Video Locked Export Unlock Video/ Define Live Video/ Playback/ Video Lock Image/ Change Camera Users/Audit User Live Events Query/Sherlock Playback Video V ideo Settings Viewer Administrator ✓✓ ✓ ✓ ✓ ✓ ✓ Operator Level 1 ✓✓ ✓ ✓ ✓ ✓ Operator Level 2 ✓✓ ✓ ✓ ✓ Operator L[...]

C636M-F (3/09) 57 ADV ANCED FEA TURES I/O INTERFACE The DX9100 system can interface with the CM6800, CM9740, or CM9760 matrix switchers. It can integrate with the CM9760-DT , CM9760-ALM, and CM9760-REL. • CM9760-DT data translator translates the ASCII protocol to the P protocol of the CM9740/CM9760 matrix switchers. • Connect up to four CM9760-[...]

58 C636M-F (3/09) CONNECTING AN ALARM UNIT Y ou can connect a maximum of four alarm units to a recorder . T o connect a CM9760-ALM to a DX9100 r ecorder using RS-232 communication: 1. Connect a null modem cable from the alarm unit’ s RS-232 port to the recorder’ s RS-232 port. 2. Set the DIP switches on the alarm unit for RS-232 communication. [...]

C636M-F (3/09) 59 ALARM UNIT CONFIGURA TION Follow these steps to configure a CM9760-ALM alarm unit. NOTE: This programming is required only on the recorder that is physically connected to the CM9760-ALM. 1. Go to Start > Programs > DX9000 Server > IO Handler Configuration. The following dialog box appears. NOTE: Y ou can also open the I/O[...]

60 C636M-F (3/09) Figure 72. Device 2 Alarm Driver Dialog Box 5. Click Configure. The following dialog box appears. Figure 73. CM9760 Alarm Configuration Dialog Box 6. Set the baud rate to 4800. The alarm unit should have this same baud rate. 7. Enter 1 in the COM Port field. This is the port on the recorder that connects to the alarm unit. The sys[...]

C636M-F (3/09) 61 Figure 74. Dialog Box to Configure External 1 Source 3. Select the channel or channels that will receive events from the alarm unit. 4. Enter the server name that the alarm unit is connected to. 5. Select Device 2 as configured in the I/O Handler . This is the logical device number that the alarm unit is connected to. 6. Enter the[...]

62 C636M-F (3/09) 7. Click OK. The information you entered appears on the screen, as shown in Figure 75. NOTE: If you click Clear , all configurations for the selected channel are deleted. Figure 75. Sample Configuration for External 1 Source[...]

C636M-F (3/09) 63 8. Click Next. The following dialog box appears. Figure 76. Dialog Box to Configure External 2 Source 9. Follow steps 3-7 if you want to define a second event. 10. Click Next. The Step 3 screen appears. NOTE: The Step 3 and Step 4 screens are used for the relay unit configuration and the data translator configuration. Y ou do not [...]

64 C636M-F (3/09) CONNECTING A RELA Y UNIT T o connect a CM9760-REL to a DX9100 recor der using RS-232 communication: 1. Connect a null modem cable from the relay unit’ s RS-232 port to the recorder’ s RS-232 port. 2. Set the DIP switches on the relay unit for RS-232 communication. Refer to the CM9760-REL Installation/Operation manual. If using[...]

C636M-F (3/09) 65 Figure 78. Relay I/O Handler Dialog Box 2. Click Select Driver on Device 2 to define the external device driver that is connected to the server . The following dialog box appears. Figure 79. CM9760 Relay Driver Dialog Box 3. Select CM9760REL.dll. RELA Y UNIT CONFIGURA TION Follow these steps to configure a CM9760-REL relay unit. N[...]

66 C636M-F (3/09) Figure 81. CM9760 Relay Configuration Dialog Box 6. Set the baud rate to 9600 and the parity to Even. The relay unit should have these same settings. 7. Enter 1 in the COM Port field. This is the port on the recorder that connects to the relay unit. The system defaults to COM 2 . 8. Set the default latch time. This time activates [...]

C636M-F (3/09) 67 I/O Manager for Relay Unit The Step 3 and Step 4 screens in the I/O Manager Configuration are used to finish configuring a relay unit. Step 3 configures the recorder channels with the selected relay ports. Step 4 translates the event type from one type to another . If you are already in the I/O Manager Configuration, follow the st[...]

68 C636M-F (3/09) 6. Click Next. The following dialog box appears. Figure 83. Dialog Box to Configure Relay Event Type 7. Select the event type to translate. NOTE: Do not select Stop Recording and Start Recording. They are reserved for future use. 8. Select “No translation.” 9. Click OK and then Finish.[...]

C636M-F (3/09) 69 CONNECTING A CM9760-CC1 T o connect a CM9760-CC1 to a DX9100 r ecorder: 1. Connect a null modem cable from the CM9760-DT’ s COM A port to the recorder’ s RS-232 port. 2. Connect a null modem cable from the CM9760-DT’ s COM B port to COM 1 or COM 2 port on the CM9760-CC1. 3. Set the jumpers in the data translator for baud rat[...]

70 C636M-F (3/09) CONNECTING A CM6800 The CM6800 external alarm files must be set up correctly . Y ou must set auto r eset on the CM6800 to acknowledge alarms. Refer to the CM6800 Installation/Operation manual. T o connect a CM6800 to a DX9100 recor der: 1. Connect a null modem cable from the recorder’ s RS-232 port to COM 1 (RS-232) on the CM680[...]

C636M-F (3/09) 71 DA T A TRANSLA TOR CONFIGURA TION Integrating a data translator serves two functions: • Synchronize time between the DX9100 system and the matrix switcher . • Send ASCII command strings to the matrix switcher (CM6800/CM9740/CM9760) for alarm conditions, such as sending alarms based on motion detection. NOTE: This programming i[...]

72 C636M-F (3/09) Figure 89. CM9760 Relay Configuration Dialog Box 6. Set the baud rate to 4800 and the parity to Even. The data translator should have these same settings. 7. Enter 1 in the COM Port field. This is the port on the recorder that connects to the data translator . The system defaults to COM 2. 8. Set the T ime Synch Update. This is th[...]

C636M-F (3/09) 73 I/O Manager for Data T ranslator The Step 3 and Step 4 screens in the I/O Manager Configuration are used to configure the data translator . Step 3 configures the recorder channels with the selected data translator . Step 4 translates the event type from one type to another . If you are already in the I/O Manager Configuration, fol[...]

74 C636M-F (3/09) Figure 91. Dialog Box to Configure Data Translator Event Type 7. Select the event type to translate. 8. Select “No translation.” 8. Click OK and then Finish. 6. Click Next. The following dialog box appears.[...]

C636M-F (3/09) 75 DVR MANAGEMENT If the DX9100 DVR system is connected to a matrix switcher , the operation of the system can be managed with the Server Alert Configuration Utility . If recorders are not recording or there is no communication with recorders, this utility sends alar ms to the matrix switcher . If the DX9100 system is connected to a [...]

76 C636M-F (3/09) CONFIGURING THE DA T A TRANSLA TOR 1. Go to Start > Programs > DX9000 Viewstation > Server Aler t Configuration Utility . The following dialog box appears. Figure 93. Data Translator Configuration Dialog Box 2. Click Select. The following dialog box appears. Figure 94. Data Translator Driver Dialog Box 3. Select CM9760DT [...]

C636M-F (3/09) 77 Figure 96. CM9760-DT Configuration 7. Set the baud rate to 4800 and the parity to Even. The data translator should have these same settings. 8. Enter the COM Port number . This is the port on the viewstation that connects to the data translator . 9. Click OK. 10. Click T est. 11. Click OK on the Server Alert Configuration screen t[...]

78 C636M-F (3/09) RELA Y UNIT CONNECTIONS Y ou can connect up to four relay units to each viewstation. The CM9760-REL should be used with third-party matrix switchers for hard-wired alarm integration. T o connect a CM9760-REL to a DX9100 viewstation using RS-232 communication: 1. Connect a null modem cable from the relay unit’ s RS-232 port to th[...]

C636M-F (3/09) 79 CONFIGURING THE RELA Y UNIT 1. Go to Start > Programs > DX9000 Viewstation > Ser ver Alert Configuration Utility . Figure 98. Relay Unit Configuration Dialog Box 2. Click Select. The following dialog box appears. Figure 99. Relay Unit Driver Dialog Box 3. Select CM9760REL.dll. 4. Click Open. The following dialog box appea[...]

80 C636M-F (3/09) Figure 101. CM9760-REL Configuration Dialog Box 7. Set the baud rate to 9600 and the parity to Even. The relay unit should have these same settings. 8. Enter the COM Port number . This is the port on the viewstation that connects to the relay unit. 9. Change the default latch time. This time activates the relays on the relay unit [...]

C636M-F (3/09) 81 FOREIGN LANGUAGE PROGRAMMING This programming is applicable to the viewstation only . Y ou can select only the following locations for use with the DX9100 system: • English (United States) • French (France) • German (Germany) • Italian (Italy) • Polish • Portuguese (Brazil) • Russian • Chinese (PRC) • Spanish (Sp[...]

82 C636M-F (3/09) 4. Click Set Default. The following dialog box appears. Figure 103. Select System Location 5. Select the same location. 6. Click OK. 7. Click Apply . 8. Click Y es to skip file copying and use existing files. 9. Click Y es to restart your computer . The new settings take effect after the computer reboots. The DX9100 will support S[...]

C636M-F (3/09) 83 SPECIFICA TIONS RECORDER Electrical/Video Input V oltage 100 to 240 V AC, 50/60 Hz, autoranging. The reset feature is enabled when power becomes unstable or interrupted. Power Consumption 235 W maximum Signal System NTSC/P AL, autosensing Operating System Windows 2000 and SP3 Service Pack Recording Resolution NTSC (DX9100H) 352 x [...]

84 C636M-F (3/09) VIEWST A TION Electrical Input V oltage 100 to 240 V AC, 50/60 Hz, autoranging Power Consumption 90 W maximum Operating System Windows 2000 and SP2 Service Pack Mechanical Connectors 6-pin mini-DIN PS/2 mouse and keyboard DB9 T wo RS-232 COM ports available for external devices DB15 SVGA monitor port (1024 x 768) DB15 Composite mo[...]

C636M-F (3/09) 85 PRODUCT WARRANTY AND RETURN INFORMA TION WARRANTY Pelco will repair or replace, without charge, a ny merchandise proved defective in material or workmanship for a pe riod of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years: – Fiber optic products – TW3000 Series unshielded twi[...]

Pelco, Inc. Worldwide Headquarters 3500 Pelco W ay Clovis, California 93612 USA USA & Canada T el (800) 289-9100 Fax (800) 289-9150 International T el +1 (559) 292-1981 Fax +1 (559) 348-1120 www .pelco .com[...]