Pelco CM6800-32X6 manual

CM6800-32X6 Matrix Switcher C1522M-C (2/05) ® INST ALLA TION/OPERA TION[...]

2 C1522M-C (2/05) CONTENTS Section Page IMPORT ANT SAFEGUARDS AND W ARNINGS .............................................................................................. .................................................................... 6 DESCRIPTION ................................................................................................[...]

C1522M-C (2/05) 3 OPERA TION ........................................................................................................................................................................................................................ 55 OVERVIEW ............................................................................................[...]

4 C1522M-C (2/05) LIST OF ILLUSTRA TIONS Figure Page 1 Sample CM6800-32X6 System ..................................................................................................... ................................................................... 7 2 Installing Rack Ears ..........................................................................[...]

C1522M-C (2/05) 5 LIST OF T ABLES T able Page AV ideo Coaxial Cable Requirements .............................................................................................. ................................................................... 12 B Communication Port Devices and Wiring ...............................................................[...]

6 C1522M-C (2/05) This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. This symbol indicates that there are important operating and mainte- nance instructions in the literature accompanying this unit. CAUTION: RISK OF ELECTRIC SHOCK. DO NOT OPEN. IMPORT ANT SAFEGUARDS AND W ARNINGS 1. Read,[...]

C1522M-C (2/05) 7 DESCRIPTION Pelco’ s CM6800 Matrix Switcher/Controller is a cross-point video matrix switcher . The CM6800-32X6 provides switching and control for 32 video inputs and six monitor outputs from any one of up to 10 keyboards, PCs, and other devices. All 32 video inputs can be used to control other devices, such as multiplexers, and[...]

8 C1522M-C (2/05) Programming The CM6800 features easy programming through on-screen menus or the Windows ® -based CM6800-MGR software package. All programming is password-protected . Programming menus are provided in English, French, German, Italian, Polish, Portuguese, Russian, and Spanish. Keyboards Up to eight keyboards from the KBD100/200A/30[...]

C1522M-C (2/05) 9 System Access and Priority The CM6800 provides the following ways to restrict system access: • Camera to Monitor: Cameras can be assigned to specific monitors for viewing. • Keyboard to Monitor: Keyboards can be assigned to control specific monitors. • Camera to Keyboard: -V iewing: Keyboards can be assigned view-only access[...]

10 C1522M-C (2/05) MODELS CM6800-32X6 Matrix switcher/controller with 32 video inputs and 6 monitor outputs, NTSC configured 120/230 V , 50/60 Hz, autoranging CM6800-32X6-X Matrix switcher/controller with 32 video inputs and 6 monitor outputs, P AL configured 120/230 V , 50/60 Hz, autoranging ASSOCIA TED EQUIPMENT KBD100 Desktop keyboard with full [...]

C1522M-C (2/05) 11 INST ALLA TION Unpack and inspect all parts carefully . The following parts are supplied: 1 CM6800 Switcher/Controller 4 10-32 x .750-inch pan head screws 4 .500” OD nylon washers 1 Power cord 2 6-foot (1.8 m) straight data cables with RJ-45 connectors 1 6-foot (1.8 m) reversed data cable with RJ-45 connectors 2 RJ-45 wall bloc[...]

12 C1522M-C (2/05) VIDEO SOURCES The CM6800-32X6 offers 32 full-function video inputs which support Coaxitron PTZ control and video loss detection. The video inputs can be used for looping video connections with terminating and unterminating switches on the back panel. They also provide the ability to view and interface with other devices, such as [...]

C1522M-C (2/05) 13 2. Set the terminating switches according to your system requirements. Te r minating switches are used to terminate or unterminate the video input. The factory default has the switches set in the terminated (75-ohm) position. If you are connecting only a camera to an input, leave the switch in the terminated position. Figure 5. C[...]

14 C1522M-C (2/05) CONTROL LINES Y ou cannot connect a Coaxitron camera to the PTZ port. If your video sources are all controlled by Coaxitron, skip this section . Connect camera control lines to receivers. If any of your video sources are using D or P protocol via RS-422 communications, they will connect at the PTZ connector on the back of the CM6[...]

C1522M-C (2/05) 15 MONITORS The CM6800-32X6 supports six monitors. 1. Install monitors according to the instructions provided with them. 2. Connect the monitor cables at the appropriate video output BNC receptacles on the back of the CM6800. 3. T erminate cables at the monitors. If you are looping to other devices, unterminate all but the last devi[...]

16 C1522M-C (2/05) ALARMS The CM6800 provides numerous alarm handling options. Refer to the Programming section for a detailed description. 1. Connect wires from the sensors to the respective alarm input points on the connectors at the back of the CM6800. Each sensor requires two wires – one wire to the alarm input terminal and a return wire to o[...]

C1522M-C (2/05) 17 CONNECTING DEVICES THROUGH THE COMMUNICA TION PORTS The CM6800-32X6 Matrix Switcher/Controller provides five communication ports on the rear panel for connecting peripheral components. Instructions are provided in this section for the most commonly used connections. NOTE: Connection instructions for other periperal devices, such [...]

18 C1522M-C (2/05) Table C. Default Port Settings Port Default Settings COM 1 MGR, RS-232, 56000 baud, no parity , 8 data bits, 1 stop bit COM 2 ASCII, RS-232, 9600 baud, no parity , 8 data bits, 1 stop bit COM 3 M, RS-485, 19200 baud, no parity , 8 data bits, 1 stop bit COM 4 MUX-GENEX, RS-485, 9600 baud, odd parity , 8 data bits, 1 stop bit COM 5[...]

C1522M-C (2/05) 19 KBD100, KBD200A, AND KBD300A SERIES KEYBOARDS Y ou can connect up to eight KBD100/200A/300A Series keyboards to either of the following ports: • COM 4 (up to 8 remotely connected keyboards) • COM 5 (1 direct-powered keyboard or up to 8 remotely connected keyboards) The total number of KBD100/200A/300A Series keyboards connect[...]

20 C1522M-C (2/05) 3. Set the keyboard DIP switches for the desired address for the local keyboard (refer to Figure 12 and T able D). Table D. Keyboard Addresses: KBD100/200A/300A Series Keyboards Switch Settings Keyboard Address 1 2 3 4 10 OFF OFF OFF OFF 21 O N OFF OFF OFF 32 OFF ON OFF OFF 43 O N ON OFF OFF 54 OFF OFF ON OFF 65 O N OFF ON OFF 76[...]

C1522M-C (2/05) 21 KBD100, KBD200A, AND KBD300A: REMOTE KEYBOARDS Use COM 4 or 5 for remote keyboard connections. Each port can support up to eight KBD100/200A/300A Series keyboards. Do not exceed a total capacity of eight keyboards connected to the CM6800-32X6. NOTE: A KBDKIT or KBDKIT -X is required to connect remote keyboards. The KBDKIT(-X) con[...]

22 C1522M-C (2/05) M DEVICES M protocol devices (KBD960/KBR960 keyboards, ALM2064 Alarm Interface Units, and REL2064 Relay Interface Units) can be connected to COM 3 on the CM6800-32X6. If only one device is to be connected to COM 3, use the instructions for that device in the following sections. If more than one device is to be connected to COM 3,[...]

C1522M-C (2/05) 23 Connecting a Single KBD960/KBR960 Keyboard To connect a single KBD960/KBR960 Keyboard to the CM6800: 1. Connect the keyboard to the CM9505UPS using the straight cable supplied with the keyboard. 2. Connect the CM9505UPS to COM 3 on the CM6800-32X6 using the 6-foot (1.8 m) straight data cable supplied with the CM6800. NOTE: After [...]

24 C1522M-C (2/05) Connecting a Single ALM2064 Alarm Interface Unit To connect a single ALM2064 Alarm Interface Unit: 1. Connect the ALM2064 OUT port to COM 3 on the CM6800-32X6 using the 6-foot (1.8 m) straight data cable supplied with the CM6800. 2. Set SW2, DIP switches 1-8 to the appropriate positions for the local address (default address sett[...]

C1522M-C (2/05) 25 Multiple M Devices Multiple M devices (KBD960/KBR960, ALM2064, and REL2064) can be connected to COM 3 on the CM6800-32X6, either as local devices or remote devices (when connecting two KBD960/KBR960 keyboards to the CM6800, you must use a remote connection). Multiple M Devices: Local Connection 1. If you are connecting a KBD960/K[...]

26 C1522M-C (2/05) Multiple M Devices: Remote Connection Use a remote connection when the distance from the CM6800 is greater than 6-feet (1.8 m). 1. Connect each ALM2064 and REL2064 unit to a wall block with a 6-foot (1.8 m) straight cable (supplied with the CM6800). Y ou can connect a maximum of two ALM2064 units and two REL2064 units to the CM68[...]

C1522M-C (2/05) 27 CONNECTING A PC The CM6800 provides PC-based setup and programming software that facilitates complete switcher programming and configuration. Refer to the CM6800-MGR Quick Start Guide for instructions on using the software. Connect a PC to the CM6800 to access the CM6800-MGR software or to download upgrades to the software. 1. Us[...]

28 C1522M-C (2/05) CONNECTING GENEX MUL TIPLEXERS Use COM 4 to connect up to eight Genex Multiplexers to the CM6800-32X6. 1. Connect the COM IN port of the multiplexer to COM 4 on the CM6800-32X6, using the 6-foot (1.8 m) reversed data cable supplied with the CM6800. One reversed cable and two straight cables are supplied with the CM6800 (save the [...]

C1522M-C (2/05) 29 LOCAL AUXILIARIES The CM6800-32X6 provides two local auxiliary (AUX) outputs on the rear panel for controlling VCRs, printers, and other devices. These outputs can be activated directly from a keyboard by using the F1 and F2 function keys, or they can be activated by an alarm (determined by programming). Both relay contacts and T[...]

30 C1522M-C (2/05) Connecting the Open Collector output – F2 (TTL) F2 is a TTL open collector output. This output provides a path to ground to control the low voltage trigger input on many devices. It can control higher voltage control inputs via isolation relays. Refer to Figure 24 for wiring details. Do not exceed the voltage and current rating[...]

C1522M-C (2/05) 31 00620 Figure 25. CM6800 Time/Date Stamp on Monitor The time stamp will be advancing in one-second increments. Wait five seconds before proceeding. INITIALIZE KEYBOARDS Specify a monitor for each keyboard after your first power -up or any time power is cycled to the keyboard or the CM6800. Always allow five seconds to elapse befor[...]

32 C1522M-C (2/05) COMMUNICA TION PORTS If you are using any communication port for a device not specified by the default setting, open the Port programming screen to change the settings. Table F. Default Port Settings Port Default Settings COM 1 MGR, RS-232, 56000 baud, no parity , 8 data bits, 1 stop bit COM 2 ASCII, RS-232, 9600 baud, no parity [...]

C1522M-C (2/05) 33 MONITOR COLOR ADJUSTMENT : Once you have connected all devices and powered the system, use the CM6800 color bars as a reference tool for adjusting the color on each monitor . 1. Enter 9999. 2. Press the CAM key . Broadcast quality color bars appear on the monitor . 3. Adjust color on each monitor as necessary until the color bars[...]

34 C1522M-C (2/05) PROGRAMMING THE CM6800 The CM6800 is shipped from the factory with default programming settings. If the defaults are acceptable, the CM6800 can be operated without any user programming. However , you may want to program the following basic system settings: •T ime and date • Camera titles • PTZ control via hardwire data conn[...]

C1522M-C (2/05) 35 CM6800 PROGRAMMING MODE 1. If you have not already done so, select the monitor (KBD960/KBR960: if the Camera menu appears, press to exit). 2. Press the PGM key or select PGM on the KBD960/KBR960). The Password screen appears. Note that on the KBD960/KBR960, you must first select and DEF . Then enter the Define PIN (Default: 1234)[...]

36 C1522M-C (2/05) Exit Programming Mode NA VIGA TE AND SELECT OPTIONS/FIELD ENTRIES IN PROGRAMMING MODE During programming, a menu appears on the monitor screen. The currently selected field blinks. Use the following keys or joystick on your keyboard to navigate the programming screens. Function Navigate programming screens. PRE V NEXT MAC HOLD Ac[...]

C1522M-C (2/05) 37 Function Scroll through options in programming fields. Select option in a programming field. Enter a numerical value in an option field (not available in all fields). Access the HELP screen (Sequences, Macros, and Alarm Group screens). Access the NEXT or PREVIOUS page of a list (not available on every screen). Keyboard KBD100/200[...]

38 C1522M-C (2/05) ACCESS The CM6800 supports the following system partitioning to control switching system access: Keyboard to Monitor: Restrict a keyboard from accessing selected monitors. Camera to Keyboard: Restrict a keyboard from calling selected cameras to monitors. Or video viewing only: permit the viewing of selected cameras while preventi[...]

C1522M-C (2/05) 39 ALARM PROGRAMMING Alarmed cameras can be displayed on one or several monitors as part of one or several alarm groups (each monitor can display only one alarm group.) Before programming alarm settings note the following precautions: •V erify that no automated system functions are set to run, such as a macro that would arm or dis[...]

40 C1522M-C (2/05) INTERNAL AND EXTERNAL ALARMS Use the Alarm Contact screens to configure alarm inputs. When an alarm is triggered, the alarm icon and the alarm letter (“I” for internal; “E” for external) appear on monitors programmed through the Alarm Group screen to display the alarm. Figure 31. Program an Internal or External Alarm 1. S[...]

C1522M-C (2/05) 41 In the AUX field, select an auxiliary to be activated. GON = turn global auxiliary on GOFF = turn global auxiliary off CON = turn camera auxiliary on COFF = turn camera auxiliary off NOTE: Activate the auxiliaries on the rear panel of the CM6800 by selecting global auxiliary numbers 1 or 2. The remaining global auxiliary numbers [...]

42 C1522M-C (2/05) AUXILIARY OUTPUTS The two local auxiliary (AUX) outputs on the rear panel of the CM6800-32X6 can be operated manually from a system keyboard or automatically in response to an alarm. Figure 33. Program Auxiliary Outputs Latching or Momentary Operation In the MODE field for each auxiliary , select either LA T or MOM. Alarm-based O[...]

C1522M-C (2/05) 43 CAMERA PROGRAMMING Extended Coaxitron protocol receivers can be operated without any programming changes, other than changing the camera title, if necessary . For other receiver control protocols, you must select the control type for the device connected to each video input. If necessary , first program logical camera number . PR[...]

44 C1522M-C (2/05) PROGRAM CAMERAS PELCO SWITCHER MODEL CM6800 MAIN MENU 1 CAMERA 2 LOGICAL CAMERA 3 MONITOR 4 ACCESS 5 TIME & DA TE 6 PORT 7 PRIORITY 8 SEQUENCE 9 MACRO 10 ALARM CONT ACTS 11 EVENT TIMER 12 SET AUXILIARY 13 SET P ASSWORD 14 ABOUT CM6800 ENGLISH RETURN 00654 CAMERA 0001 VERTICAL DRIVE: CONTROL: PORT ADDRESS: CAMERA TITLE CAM 1 S[...]

C1522M-C (2/05) 45 4. Select the camera title. This title (up to 20 characters) appears on the monitor during real-time camera display . a. Navigate to the position in the camera title that you want to change. b. Use F1 and F2 to scroll through the camera title characters; once you reach the desired character for that position, navigate to the next[...]

46 C1522M-C (2/05) EVENT TIMERS Y ou can automate system operation to activate sequences or macros on specific monitors. Events can be scheduled on a daily or weekly basis, or on a specific date such as a holiday . If you set more than one timer to start at the same time, the timers will run i n the following order of precedence: weekly , special, [...]

C1522M-C (2/05) 47 MACRO Macros simplify operator control by grouping multiple functions into a single command. Figure 37. Access the Macro Screen MACRO: Select the macro number you want to program. STP: Each macro can include up to 72 steps. For each step select entries for the following fields as necessary: CMD: Select a command. In addition, ent[...]

48 C1522M-C (2/05) MONITOR DISPLA Y Use the Monitor screen to adjust monitor display settings for your system. Y ou can adjust settings for the current monitor only (CURRENT) or for all system monitors (ALL). Figure 39. Access the Monitor Screen MONITOR: Select CURRENT to program the monitor display for the monitor you are currently operating or AL[...]

C1522M-C (2/05) 49 MON/ALM ST A TUS: Enable (ON) or disable (OFF) on-screen display of the monitor or alarm status. MONITOR ST A TUS DISPLAY V ALUES: Blank = normal status H = hold S = sequence NOTE: If an operator presses the HOLD key while an alarm appears on the monitor , the H does not appear . The alarm icon and alarm status value blink to ind[...]

50 C1522M-C (2/05) PASSWORD Use the Set Password screen to change the system password. If you change the password and then forget the new one, you will have to reset the system to the factory defaults. All system program- ming will be lost. Pelco recommends uploading your programming settings to the CM6800-MGR before changing the password. This all[...]

C1522M-C (2/05) 51 PORTS (SERIAL/COM PORTS) Use the Port screen to configure the settings for each device connected to a Serial/COM port on the rear panel of the CM6800. Figure 41. Access the Port Screen 1. Select the number of the desired Serial Port/COM port (01-06). The serial port numbers correspond to the communication ports on the CM6800-32X6[...]

52 C1522M-C (2/05) PRIORITY The CM6800 provides eight levels of priority control. Each level defines the ability of a keyboard to control a pan/tilt/zoom (camera positioning system) and to access programming screens. Priority level applies system wide; a keyboard assigned priority level 2 on COM port 5 has a higher priority than a keyboard assigned[...]

C1522M-C (2/05) 53 SCRATCHP AD SEQUENCE MON ## STP CAM DWL CMD ## AUX ## 01 0001 02 PA TT 02 CON 001 02 0005 02 PRES 12 GOFF 101 03 0008 02 FSCN 00 CON 008 04 0012 02 RSCN 00 — — — — 000 05 0023 02 SSCN 00 — — — — 000 06 0006 02 — — — — 00 — — — — 000 07 0007 02 — — — — 00 — — — — 000 08 0008 02 — ?[...]

54 C1522M-C (2/05) TIME AND DA TE Use the T ime and Date screen to set the system time and date settings. The time and date displayed on the monitor during real-time camera display is the time set in the memory through this screen. The system time and date information is kept current in battery-backed RAM. New time and date information will be set [...]

C1522M-C (2/05) 55 OPERA TION OVERVIEW A brief description of CM6800 operation is provided here. Refer to the following sections for detailed instructions and options. Install the CM6800E and connect Refer to the Installation section. all system devices. Power -up the system. Refer to the System Start-up section. Switch monitor . 1. Enter the monit[...]

56 C1522M-C (2/05) SELECT CAMERAS If you select a restricted camera view , the camera view does not appear on that monitor . The previously selected, unrestricted camera view remains on the monitor . KBD100/200A/300A KEYBOARDS KBD960/KBR960 KEYBOARDS 1. Enter the camera number . 1. Enter the camera number . 2. Press the CAM key . 2. Press the CAM k[...]

C1522M-C (2/05) 57 OPERA TE SEQUENCES Y ou can run a scratchpad sequence from an individual monitor or a system sequence on any monitor accessible from the keyboard. When running a sequence, any cameras not accessible to the keyboard will be bypassed. A sequence runs continuously until a system operator selects a different camera, or an event timer[...]

58 C1522M-C (2/05) RUN A MACRO A macro runs until the last step is completed (unless you specify a loop in the macro). ACKNOWLEDGE AN ALARM When an alarm is triggered, an alarm icon appears on the monitors programmed to show that alarm. KBD100/200A/300A KEYBOARDS 1. Enter the monitor number . 2. Press the MON key . 3. Press the ACK key . The alarm [...]

C1522M-C (2/05) 59 CALL A PRESET Program the preset through the keyboard. Refer to the appropriate keyboard manual for instructions. Presets are not available with the KBD100 keyboard. KBD200A/300A KEYBOARDS 1. Enter the preset number . 2. Press the PRESET key . KBD960/KBR960 KEYBOARDS 1. Enter the preset number . 2. Press the Prst/Lock key . OR Se[...]

60 C1522M-C (2/05) OPERA TE AUXILIARIES/RELA YS Local auxiliaries are the outputs on the rear panel of the CM6800. External auxiliaries are available by connecting an REL2064 Relay Interface Unit to the CM6800 through COM port 3. Operate a Local Auxiliary KBD100/200A/300A KEYBOARDS KBD960/KBR960 KEYBOARDS Auxiliary 1 relay: Press F1 to activate/dea[...]

C1522M-C (2/05) 61 CONTROL GENEX MUL TIPLEXER AND GENEX MUL TIPLEXER DISPLA YS Multiplexer control is not available with the KBD100. KBD200A/300A KEYBOARDS 1. Enter the number of the multiplexer input. 2. Press the CAM key . 3. Press the SHIFT key . When the SHIFT LED is lit, the keyboard can be used to operate the following Genex multiplexer funct[...]

62 C1522M-C (2/05) Figure 46. CM6800 DIP Switches – Factory Default Settings Table G. CM6800 DIP Switch Settings CM6800 DIP Switch Default Settings Switch 1 OFF (0) = NTSC CM6800-32X6: OFF ON (1) = P AL CM6800-32X6-X: ON Switch 2 RESERVED – must be in the OFF position for proper operation OFF Switch 3 RESERVED – must be in the OFF position fo[...]

C1522M-C (2/05) 63 ALARM GROUP DISPLA Y OPTIONS To display on a monitor , an alarm must be assigned to an alarm group (A-F). Before programming alarms you may want to determine the alarm display format for each alarm group. An alarm can include up to eight steps, so eight camera views could display as a part of each alarm. A priority alarm appears [...]

64 C1522M-C (2/05) Reverse Chronological Pair: M and L The most recent alarm of a specific group is displayed on one designated monitor , while all other alarms in the group are sequenced on the second designated monitor . All steps programmed for the alarm contact appear on the designated monitor . Example: Four alarms set to display on monitors 0[...]

C1522M-C (2/05) 65 MACRO COMMANDS T able H provides a description of each macro command and the additional fields required for each command. Refer to the Macro section for instructions on programming macros. Table H. Macro Commands Command Description Specify Field(s) GON Activate an auxiliary . Auxiliary Command # GOFF T urn off an auxiliary . Aux[...]

66 C1522M-C (2/05) Table H. Macro Commands (Continued) Command Description Specify Field(s) PIPO T urn off multiplexer picture-in-picture view . Multiplexer input Camera Monitor Monitor QUAD Display multiplexer four-camera mode. Camera group* Command # Multiplexer input Camera Monitor Monitor NANO Display multiplexer nine-camera mode. Camera group*[...]

C1522M-C (2/05) 67 ASCII OPERA TING COMMANDS ASCII protocol uses the ASCII character set to transmit and receive commands between an ASCII device (such as a personal computer (PC) or ASCII keyboard) and the CM6800. The ASCII protocol communicates in a standard asynchronous, byte-oriented protocol that includes: 1 start bit, 8 data bits, 1 parity bi[...]

68 C1522M-C (2/05) Table J. ASCII Commands Number ranges are enclosed in brackets – do not enter the brackets. When you control a fixed speed pan and tilt, omit the speed information. NOTE: In a 96 x 16 system the numbers for cameras, monitors, alarms, and relays can be doubled. Command [1-9999]Ma [1-9999]#a +a -a [1-99]qa [1-99]ba ea [1-64]ea [1[...]

C1522M-C (2/05) 69 Table J. ASCII Commands (Continued) Desired Action Begin random scan Begin frame scan Stop scan Auxiliary on Auxiliary off Camera auxiliary on Camera auxiliary off Start macro Stop macro Acknowledge alarm Arm internal alarm Arm external alarm Arm video loss alarm Disarm internal alarm Disarm external alarm Disarm video loss alarm[...]

70 C1522M-C (2/05) TROUBLESHOOTING GAINING INITIAL CONTROL If you are having problems gaining control of your system for the first time: • Confirm that all system equipment is plugged in and has power . • Confirm that each keyboard and peripheral device in your system has a unique local address. Refer to the Switch Settings section in the appro[...]

C1522M-C (2/05) 71 SOLUTIONS TO COMMON PROBLEMS Refer to T able K for a list of common problems and their solutions. Table K. Solutions To Common Problems Problem CM6800 does not have power . Y ou can see some cameras and not others from your location. The CM6800 does not respond to keyboard commands. Pressing the PGM key displays a P on the keyboa[...]

72 C1522M-C (2/05) KBD960/KBR960 ICON/BUTTON LEGEND Figure 49. Icon/Button Legend MUX CAMERA CONTROL SEQUENCE MENU MUX MENU SEQ MUX FORW ARD RUN BACKWARD MACRO RECALL/AL TERNA TE PRESET/LOCK FUNCTION CONTROLS IRIS CONTROLS IN/OUT NEAR/F AR OPEN/CLOSE OTHER CONTROLS CAMERA MONITOR TURBO ESCAPE LOG OFF CAMERA SELECTION MONITOR SELECTION CAMERA PRESET[...]

C1522M-C (2/05) 73 GLOSSARY Te rm Definition Access The CM6800 allows you to restrict system control by (1) limiting the monitors or cameras a keyboard can access, or (2) limiting the cameras that can be viewed on a monitor . Alarm display format The CM6800 Matrix Switcher provides four formats for displaying alarmed cameras on system monitors: Blo[...]

74 C1522M-C (2/05) Matrix switcher This is also known as a cross-point switcher . The cross-points are actually electronic switches that select any video input onto any video output at any one time, preserving the video impedance matching. One video signal can simultaneously be selected on more than one output. More than one video input can be sele[...]

C1522M-C (2/05) 75 RS-422 This is an Electronics Industry Association (EIA) interface standard. Pelco uses this standard for communication from a controller to one or more camera receivers (on the same line); the maximum recommended distance is 4,000 feet (1,219 m). The four -wire connection provides two wires for transmit and two wires for receive[...]

76 C1522M-C (2/05) INDEX A Access 9 Access (partitioning) 38 Addressing KBD100/200/300 series keyboards 20 KBD960/KBR960 series keyboards 32 M devices 22 Alarms acknowledge 58 alarm contact programming 39 alarm groups 39, 63 alarm inputs 9, 16, 40 ALM2064 9, 16, 22, 24, 25 block build 39, 63 chronological pair 39, 63 display 39, 63 normally open/no[...]

C1522M-C (2/05) 77 O Open collector (TTL) output 30 Operation alarms 58 auxiliaries 60 cameras 56 Genex multiplexer 61 macros 58 monitors 55 overview 55 patterns 59 presets 59 PTZ control 56 sequences 57 P P protocol 8, 14, 48 P AL 62 Partitioning (access) 38 Password password screen 35 programming 50 Patterns automatic activation 47, 53 descriptio[...]

78 C1522M-C (2/05) SPECIFICA TIONS GENERAL Memory Protection: Lithium battery , five years of data protection Keyboards: T en: Eight KBD100/200A/300A Series keyboards and two KBD960/KBR960 Series keyboards. (Switcher can provide power for one KBD100/200A/300A Series keyboard. Additional keyboards will require a remote power supply .) Receiver/Dome [...]

C1522M-C (2/05) 79 REVISION HISTORY Manual # Date Comments C1522M 10/01 Preliminary version for software version 2.00 Beta. 1/02 Original version. 2/02 Updated certifications. C1522M-A 5/03 Updated with additional functionality (such as Macros triggered by alarms). C1522M-B 6/04 Removed reference to use 18-gauge wire for EIA RS-485 communication. U[...]

W orldwide Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www .pelco.com ISO 9001 ® United States | Canada | United Kingdom | The Netherlands | Singapore | Spain | Scandinavia | France | Middle East[...]