Philips 32PF7320 manual

LCD TV 26PF5320 32PF5320 32PF7320[...]

1 Contents Thank you for purchasing this television set. This handbook has been designed to help you install and operate your TV set. We would strongly recommend that you read it thoroughly. Table of Contents Important information Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

2 Safety Information • Disconnect mains plug when: – the red light below the TV screen is flashing continuously. – cleaning the TV screen. Never use abrasive cleaning agents. – there is a lightning storm. – the set is left unattended for a prolonged period of time. • No naked flame sources, such as lighted candles, should be placed on t[...]

3 Presentation of the LCD TV LCD TV buttons: • POWER : to switch the TV on or off. • VOLUME –/+ : to adjust sound level. • MENU : to access or close menus. The PROGRAM –/+ buttons can be used to select an adjustment and the VOLUME –/+ buttons to make that adjustment. • PROGRAM –/+ : to select programmes. Rear of set The main connect[...]

4 Remote Control Buttons for LCD TV Functions 1 ) (STANDBY) To set the TV to standby mode. To switch the TV set on again, press P –/+ or 0 to 9 buttons or AV button. 2 ) Pixel + (only available on certain models/ versions) Switches the Pixel + demonstration mode on or off. 3 ) ® I Ò ‡ π † I º Peripheral device buttons (Refer to “Mode se[...]

5 Remote Control Buttons for LCD TV Functions 1 2 ) Mode* Press this button to switch between TV, DVD or AUX . 1 3 ) PIP on/off (refer to page 12) 1 4 ) List of programmes To display / clear the list of programmes. Use the buttons Îï to select a programme and the button Æ to display it. 1 5 ) Screen Format (refer to page 13) 1 6 ) Sound mode Use[...]

6 Installing your LCD TV Positioning the television set Place your TV on a solid stable surface. To avoid danger do not expose the TV to water, or heat source (e.g. lamp, candle, radiator). Do not obstruct the ventilation grid at the rear. Connecting the aerials • Use the aerial connection lead and connect the : socket situated at the bottom of t[...]

7 Sorting of Programme Sort feature allows you to change the channel number to another channel number for a particular TV station. Press the MENU button. Use the Î / ï button on the remote control to select Install and press the Æ button to access Install menu. Before you proceed to do the Automatic Installation of TV Programmes , select the men[...]

8 Name feature allows you to enter a name for any channel you select. Press the MENU button. Use the Î / ï button on the remote control repeated until Install is selected and press the Æ button to access Install menu. Press ï button repeatedly until Name is selected and press Æ button to access name mode. Use the Î / ï button to key in first[...]

9 Manual Store Manual Store feature allows you to store the programmes one at a time. Press the MENU button. Use the Î / ï button repeatedly until Install is selected and press Æ button to access Install menu. - Colour System : use the Í / Æ button to select Auto (automatic detection), PAL , NTSC 3.58 , NTSC 4.43 or SECAM . - Sound System : us[...]

10 Picture Settings Press the MENU button. The TV Menu is displayed on the screen (Picture is highlighted). Press Æ button to access Picture menu. Use the Î / ï button to select a setting and the Í / Æ button to adjust. To exit the menu, press Ë button. Description of the adjustments: • Brightness : this changes picture brilliance. • Colo[...]

11 Timer Feature The Timer feature allows you to set the timer to switch to another programme at a specified time when you are watching another programme or from standby mode. For the timer to function, the set must not be switched off. Once the set is switched off, the timer is disabled. Press MENU , select Features ( ï ) and press Æ . The Timer[...]

12 This feature allows you to call up a PIP (Picture-in-Picture) window on the screen. For the PIP to function, the HDMI input of the TV must be connected to digital output of AV device, e.g. PC / DVD-R (See Quick Guide for connection). Press the MENU button. Press the ï button repeatedly until Features is selected and press Æ button to access Fe[...]

13 Screen Formats The pictures you receive may be transmitted in 16:9 format (wide screen) or 4:3 format (conventional screen). 4:3 pictures sometimes have a black band at the top and bottom of the screen (letterbox format). This function allows you to optimise the picture display on screen. Press the ∏ button or Í / Æ button to select the diff[...]

14 Using the Teletext If a TV channel broadcast contains teletext information, each channel that broadcasts teletext transmits a page (index page) with information on how to use the teletext system, usually on page 100. The system transmitted is indicated in the option line at the bottom of the screen. On/Off teletext and Superimpose teletext page [...]

15 Using the Teletext When a dual page is displayed, use this button to toggle between the dual page. Once an active page is selected, the other page will be on hold mode. If the page has sub-pages, use the Cursor Right or Left button to access the next or previous page. Hold Press the button once to reveal hidden information (solutions to puzzles,[...]

16 Smart Picture and Sound Feature Smart Picture feature offers you a choice of 5 picture settings, namely, Rich, Natural, Soft, DVD/VCD and Personal. Smart Sound feature offers you a choice of 4 sound settings namely, Theatre, Music, Voice and Personal. Press or button repeatedly to cycle through the settings to select your desired mode. Defintion[...]

17 Using the TV as a PC Monitor Choosing PC-VGA mode Press the AV button on the remote control to display the Source List . Use the Î / ï button to select PC-VGA and then press the Æ button to switch the TV to PC-VGA mode. To return to TV mode, press the AV button, select TV and confirm with Æ button. Choosing PC-D mode Press the AV button on t[...]

18 Using in HD (High Definition) Mode HD Mode The HD (High Definition) mode allows you to enjoy clearer and sharper pictures through the CVI-1, CVI-2 or HDMI input if you are using a HD receiver/equipment that can transmit high definition programming. You must connect the HD equipment (see Quick Use Guide). Choosing HD mode Press the AV button on t[...]

19 Tips No power Poor reception No picture Good picture but no sound Good sound but poor colour or no picture Snowish picture and noise Horizontal dotted line Double images or “Ghost” images TV not responding to remote control handset Incorrect Display position (PC mode) No Video Input (PC Mode) Vertical flicker appears (PC Mode) Horizontal ?[...]

20 Tips PC and PIP modes don’t work? Standby • Check that you have configured the computer on a compatible display resolution (refer to page 15). • If the set receives no signal for 15 minutes, it automatically goes into standby mode. To save power, your set is fitted with components that give it a very low power consumption when in standby[...]

Specifications are subject to change without notice. T rademarks are the pr oper ty of Koninklijk e Philips Electronics N.V . or their respective owners. 2005 © Ko ninklijke Philips Electronics N.V . All rights reserved. www .philips.com 3139 125 33721[...]