Philips 32PFL9604H manual

www .philips.com/welcome Register your product and get suppor t at EN User manual 32PFL9604H 37PFL9604H Downloaded From TV-Manual.com Manuals[...]

Contact information Type nr. Product nr. België / Belgique 078 250 145 - € 0.06 / min Danmark 3525 8759 - Lokalt opkald Deutschland France Ελλάδα 0 0800 3122 1280 - Κλήση χωρίς χρέωση España Ireland 01 601 1777 - Free Northern Ireland 0800 055 6882 Italia Luxembourg / Luxemburg 40 6661 5644 - Ortsgespräch Appel local Nede[...]

1.1.1   Enjoy HD TV 1/2 This TV can display High Definition programmes, but to enjoy HD TV you need to get programmes in HD first. If you are not watching HD programmes, the picture quality will be that of a normal TV. You can receive programmes in High Definition from... • a Blu-ray Disc player, connected with an HDMI cable, with an HD [...]

1.1.1   Enjoy HD 2/2 Contact your dealer for more information. Go to www.philips.com/support to find FAQ’s featuring the list of HD channels or providers in your country. Downloaded From TV-Manual.com Manuals[...]

1.1.2   Safety 1/5 Make sure you have read and understood all instructions before using your TV. The warranty becomes invalid if any damage is caused by failure to follow instructions. Risk of electric shock or fire! • Never expose the TV or remote control to rain, water or excessive heat. • Never place liquid containers, such as vases[...]

1.1.2   Safety 2/5 • Never place the TV, remote control or batteries near naked flames or other heat sources, including direct sunlight. • Keep candles and other naked flames away from this product at all times. • Never insert objects into the ventilation slots or other openings on the TV. • Ensure power plugs do not come under hea[...]

1.1.2   Safety 3/5 Risk of injury or damage to the TV! • Two people are required to lift and carry a TV that weighs more than 25 kg. • If you mount the TV on a stand, only use the supplied stand. Secure the stand to the TV tightly. Place the TV on a flat, level surface that can support the weight of the TV. • When mounting the TV on [...]

1.1.2   Safety 4/5 Risk of injury to children! Follow these precautions to prevent the TV from toppling over and causing injury to children: • Never place the TV on a surface covered by a cloth or other material that can be pulled away. • Ensure that no part of the TV hangs over the edge of the mounting surface. • Never place the TV [...]

1.1.2   Safety 5/5 Risk of overheating! Always leave a space of at least 10cm around the TV for ventilation. Ensure curtains or other objects never cover the ventilation slots on the TV. Lightning storms Disconnect the TV from the power outlet and antenna before lightning storms. During lightning storms, never touch any part of the TV, pow[...]

1.1.3Position the TV Carefully read the safety precautions before positioning the TV. • Position the TV where light does not shine directly on the screen. • Dim lighting conditions in the room for best Ambilight effect. • Position the TV up to 25 cm away from the wall for the best Ambilight effect. Downloaded From TV-Manual.com Manua[...]

1.1.4Viewing distance Position the TV at the ideal viewing distance. Benefit more from HD TV picture or any picture without straining your eyes. Find the 'sweet spot', right in front of the TV, for the best possible TV experience and relaxed viewing. The ideal distance to watch TV from is three times its diagonal screen size. Whi[...]

1.1.5Screen care • Risk of damage to the TV screen! Never touch, push, rub or strike the screen with any object. • Unplug the TV before cleaning. • Clean the TV and frame with a soft damp cloth. Never use substances such as alcohol, chemicals or household cleaners on the TV. • To avoid deformations and colour fading, wipe off water[...]

Downloaded From TV-Manual.com Manuals[...]

1.1.6   End of use 2/4 When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/EC. ... Downloaded From TV-Manual.com Manuals[...]

Downloaded From TV-Manual.com Manuals[...]

1.1.6   End of use 4/4 Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed with normal household waste. Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health. D[...]

1.1.7   ECO - Green 1/2 This TV has features that contribute to energy-efficient use. Energy efficiency features • Ambient light sensor To save energy, the built-in Ambient light sensor lowers the brightness of the TV screen when the surrounding light darkens. • Energy saving The Energy saving setting of the TV combines several TV sett[...]

1.1.7   ECO - Green 2/2 • Low standby power consumption The class-leading and highly-advanced power circuitry brings down the power consumption of the TV to an extremely low level, without losing out on the constant Standby functionality. Power management The advanced power management of this TV ensures the most efficient use of its ener[...]

1.2.1   Switch on 1/2 It takes a couple of seconds for the TV to start up. If the red standby indicator is off, press O at the right of the TV to switch it on. Press O again to switch off. ... Downloaded From TV-Manual.com Manuals[...]

Downloaded From TV-Manual.com Manuals[...]

Downloaded From TV-Manual.com Manuals[...]

Downloaded From TV-Manual.com Manuals[...]

1.2.4Programme P The keys on the side of the TV allow basic TV control. You can switch TV channels with Program + / - on the side of the TV. Downloaded From TV-Manual.com Manuals[...]

1.2.5Source key The keys on the side of the TV allow basic TV control. To open the Source list to select a connected device, press Source s . Press Source s again to select a connected device in the list. After a few seconds the TV switched to the selected device. Downloaded From TV-Manual.com Manuals[...]

1.2.6IR sensor Always take care to point the remote control at the remote control infra red sensor on the front of the TV. Downloaded From TV-Manual.com Manuals[...]

Downloaded From TV-Manual.com Manuals[...]

1.3.2Unmount the stand Before you lift the TV from the stand, unscrew the 4 stand screws on the back of the TV. Downloaded From TV-Manual.com Manuals[...]

1.4.1Full High Definition LCD display This TV is equipped with a full High Definition (HD) display. A full HD 1920x1080p, the highest resolution of HD sources. This display offers a brilliant flicker free progressive scan picture with optimum brightness and superb colours. To enjoy HD TV you need to get programmes in HD first. If you are n[...]

1.4.2Ambilight Ambilight is the lighting technology that emanates from the back of the television onto the wall. This innovative technology automatically adjusts the colour and brightness of the light to match the TV picture. This creates an unprecedented improvement in viewing experience. The light also reduces eyestrain thus providing a [...]

1.4.3DVB-T and DVB-C integrated tuner Next to normal analogue TV broadcast your TV can receive digital terrestrial (DVB-T) and in certain countries also digital cable (DVB-C) TV and radio broadcasts. DVB — Digital Video Broadcasting gives you better picture and better sound quality. Some broadcasters have several audio (speech) and/or te[...]

1.4.4Programme guide The Programme guide is an onscreen guide to scheduled TV programmes. This guide is provided by digital broadcasters or the Net TV online service. You can read the programme summary, set a message to remind you when the programme starts or select programmes by genre. Read More on … > Programme guide. Downloaded Fro[...]

1.4.5Wireless network Simply link up this TV to your wireless network at home. There is no need for a network cable. Enjoy your pictures, videos and music files from your PC on a big screen. Read Setup > Network. Downloaded From TV-Manual.com Manuals[...]

1.4.6Net TV You can link up your TV to Net TV. The Net TV start page offers you movies, pictures, music, infotainment, games and many more, all set up for your TV screen. To enjoy Net TV you need to connect the TV to a router connected to the Internet. Read more on Net TV in Use your TV > Net TV. Read more on connecting to a router in S[...]

1.4.7Scenea, USB and PC Scenea With Scenea, you can set a photo as a 'wallpaper' photo on your screen. Use any photo from your collection and create your own painting on the wall. Read chapter More on ... > Scenea. USB and PC network connection View or play your own multimedia files (photos, music, videos, …) from the USB co[...]

1.4.8Universal remote control Your TV remote control is a universal remote control that can operate other devices such as DVD players and recorders, digital receivers (STB) or Home Theatre Systems (HTS). From Philips or other brands. Read more on Universal remote control in Get started > Remote control > Universal RC setup. Downloade[...]

1.5.1Onscreen You are reading the built in user manual. This manual contains all of the information needed to install and operate this TV. You can open or close the user manual with the yellow e key on the remote control. Before you carry out the instructions, close the manual with the yellow e key. When you open the manual again, it opens[...]

1.5.2On the Internet A printable version of the user manual is available on the Internet. View or print the user manual at www.philips.com/support Downloaded From TV-Manual.com Manuals[...]

2.1.1   Remote control overview 1/6 1 Standby O To switch the TV on or back to standby. 2 Home h To open or close the Home menu. 3 Guide g To open or close the Programme Guide. To open or close the content list when you browse multimedia content. 4 Options o To open or close the options menu which shows the available options. ... Downloade[...]

2.1.1   Remote control overview 2/6 5 Navigation key To navigate up, down, left or right. 6 OK key To open or close the channel overview. To activate a selection. 7 Back b To go back or exit a menu without changing a setting. To go back to the previous TV channel or the previous teletext page. To go back to the previous Net TV page. 8 Info[...]

Downloaded From TV-Manual.com Manuals[...]

2.1.1   Remote control overview 4/6 13 TV key To set the remote control in TV mode. 14 DVD, STB and HTS keys Universal remote control keys. 15 Colour keys Easy selection of teletext pages. To open or close the Demo menu (red key). 16 User manual e (yellow key) To open or close the user manual ... Downloaded From TV-Manual.com Manuals[...]

2.1.1   Remote control overview 5/6 17 Format f To select a picture format. 18 Net TV To open or close the Net TV start page. 19 Teletext To switch teletext on or off. 20 Disc menu To show the disc menu of a disc player connected with an HDMI cable with EasyLink set to On. ... Downloaded From TV-Manual.com Manuals[...]

2.1.1   Remote control overview 6/6 21 Number keys To select a TV channel or enter digits. 22 Subtitle To open the subtitle on / off menu. 23 Source s To select a connected device from the Source list. 24 Ambilight To switch Ambilight on or off. Downloaded From TV-Manual.com Manuals[...]

2.1.2   Universal remote control 1/4 Your TV remote control can control other devices such as a DVD player or a Home Theatre System from Philips or other brands. To operate a device with the TV remote control, you need to set up one of the Universal mode keys for your particular device. Once setup is complete, the Universal mode key sets t[...]

2.1.2   Universal remote control 2/4 DVD, STB or HTS key Use the DVD key to operate a DVD player or Blu-ray Disc, the STB key for a set-top box or digital cable receiver and the HTS key for a Home Theatre System. As long as the key blinks, you can control the device with the relevant keys on the remote control. To return to normal TV contr[...]

2.1.2   Universal remote control 3/4 Manual setup You can manually enter an RC code to set up a Universal mode key. Look up the appropriate RC code in the Universal RC code list in this user manual. In the list, look for the type of device and brand you need. Some brands have several RC codes available. When setup is performed manually, tr[...]

2.1.2   Universal remote control 4/4 Warning To avoid the loss of stored Universal remote control codes, do not leave the remote control without battery power for more than 5 minutes. Also during the replacement of the batteries, do not press any remote control key. Dispose of batteries according to the end of use directives. Read chapter [...]

Downloaded From TV-Manual.com Manuals[...]

2.1.3   Universal RC code list 2/26 Airis - 0290 Aiwa - 0113, 0163, 0312, 0343 Akai - 0097 Akura - 0281 Alba - 0112, 0121, 0124, 0127, 0138 Alize - 0285 Amitech - 0135 AMOi - 0225 AMW - 0114, 0354 Andersson - 0355 Apex - 0107 Asono - 0290 ATACOM - 0290 Avious - 0288 Awa - 0114 Bang and Olufsen - 0291 Basic Line - 0356 CAT - 0272, 0273 Cele[...]

2.1.3   Universal RC code list 3/26 Denver - 0124, 0203, 0275, 0281, 0284 Denzel - 0266 Desay - 0274 Diamond - 0142, 0270 Digitor - 0282Digix Media - 0367 DK Digital - 0134, 0300 Dmtech - 0091, 0368 Dual - 0266, 0369 DVX - 0142 Easy Home - 0277 Eclipse - 0270 E-Dem - 0290 Electrohome - 0135 Elin - 0135 Elta - 0093, 0135, 0152, 0285 Eltax -[...]

2.1.3   Universal RC code list 4/26 JVC - 0054, 0055, 0056, 0057, 0058, 0059, 0060, 0079, 0080, 0081, 0082, 0141, 0153, 0157, 0161, 0164, 0165, 0166, 0167, 0247, 0248, 0249, 0250, 0251, 0252, 0253, 0254, 0264, 0301, 0337 Kansai - 0284 KEF - 0378 Kennex - 0135 Kenwood - 0159, 0220, 0308, 0379 KeyPlug - 0135 Kiiro - 0135 Kingavon - 0275 Kiss[...]

2.1.3   Universal RC code list 5/26 Monyka - 0266 Mustek - 0104, 0112, 0304 Mx Onda - 0270 Mystral - 0286 NAD - 0109, 0387 Naiko - 0135, 0158 Nakamichi - 0111, 0388 Neufunk - 0266 Nevir - 0135 Next Base - 0226 NU-TEC - 0265 Omni - 0268 Onkyo - 0215, 0264, 0293 Oopla - 0287 Optim - 0269 Optimus - 0294 Orava - 0275 Orbit - 0114 Orion - 0176 [...]

Downloaded From TV-Manual.com Manuals[...]

2.1.3   Universal RC code list 7/26 TCM - 0023, 0099, 0100, 0106, 0292, 0397 Teac - 0096, 0142, 0208, 0265, 0394 Tec - 0281 Technics - 0118 Technika - 0135, 0288 Telefunken - 0273 Tensai - 0135 Tevion - 0099, 0100, 0106, 0142, 0283 Thomson - 0046, 0047, 0048, 0049, 0050, 0051, 0052, 0053, 0083, 0084, 0233, 0263, 0339, 0347 Tokai - 0266, 02[...]

2.1.3   Universal RC code list 8/26 STB Digital receiver STB codes Philips - 0432, 0436, 0437, 0439, 0506 ABC - 0448 ADB - 0461, 0462 Alcatel - 0463, 0540 Allegro - 0464 Amstrad - 0431, 0449 Andover - 0452 Arcon - 0431 Atlanta - 0465 Auna - 0466 Axis - 0431 BBT - 0467 Belgacom TV - 0468 Bell Atlantic - 0453 Birmingham Cable Communications [...]

2.1.3   Universal RC code list 9/26 Hitachi - 0484 HomeChoice - 0441, 0485 Humax - 0486, 0487 HyperVision - 0435 ITT Nokia - 0434 Jerrold - 0433, 0448, 0536 Jiuzhou - 0488 JVC - 0432 Kabel Deutschland - 0489, 0490 Kansalaisboksi - 0491 LG Alps - 0492 Macab - 0439 Maestro - 0493 Magnavox - 0494 Maspro - 0432 Matav - 0462 Matsui - 0432 Maxdo[...]

2.1.3   Universal RC code list 10/26 SkyCable - 0513 Skyworth - 0514 Starcom - 0448 Stargate - 0515 Stellar One - 0516 TaeKwang - 0517 Tandy - 0518 Tatung - 0519 Teknika - 0520 Tele+1 - 0442, 0445, 0539 Telefonica - 0460 Telegent - 0521 Telenet - 0522 Telepiu - 0442, 0539 Thomson - 0438 Timeless - 0476 Tiscali - 0523 Tocom - 0524 Torx - 04[...]

Downloaded From TV-Manual.com Manuals[...]

2.1.3   Universal RC code list 12/26 Axil - 0212 Axis - 0010, 0028, 0030, 0036, 0401, 0402, 0407 B and K - 0213 Barcom - 0027 BeauSAT - 0212 BEC - 0214 Beko - 0215 Belgacom TV - 0216 Belson - 0217 Benjamin - 0218 Best - 0010, 0027, 0028, 0402 Best Buy - 0219 Big Brother - 0191 Blackbird - 0220 Blaupunkt - 0033, 0155, 0388 Blue Sky - 0164, [...]

2.1.3   Universal RC code list 13/26 CityCom - 0020, 0037, 0071, 0152, 0161, 0165, 0423 Clatronic - 0035, 0398 Clemens Kamphus - 0046 CNT - 0024 Colombia - 0153 Columbia - 0153 COLUMBUS - 0043 Comag - 0153, 0221, 0239 Commander - 0392 Commlink - 0023, 0395 Comtec - 0036, 0395, 0401 Condor - 0010, 0028, 0161, 0240, 0402 Connexions - 0010, 0[...]

2.1.3   Universal RC code list 14/26 DNR - 0419 DNT - 0032, 0054, 0391, 0403 Dong Woo - 0049 Drake - 0041, 0255 DStv - 0168, 0256 Dual - 0257 Dune - 0010, 0402 Dynasat - 0162 DynaStar - 0258 Echostar - 0032, 0164, 0173, 0403, 0427, 0428 EIF - 0259 Einhell - 0019, 0023, 0026, 0153, 0158, 0164, 0394, 0395 Elap - 0163, 0164 Electron - 0260 El[...]

2.1.3   Universal RC code list 15/26 Flair Mate - 0164 Fortec Star - 0198 Foxtel - 0071, 0168, 0172 Fracarro - 0271, 0428 France Satellite/TV - 0043 Freecom - 0019, 0045, 0155, 0158 Freesat - 0108, 0414 FTE - 0047, 0402, 0410, 0416 FTEmaximal - 0010, 0164 Fuba - 0010, 0019, 0027, 0028, 0029, 0032, 0033, 0043, 0054, 0152, 0155, 0387, 0402, [...]

2.1.3   Universal RC code list 16/26 Hirschmann - 0010, 0033, 0046, 0098, 0108, 0155, 0158, 0161, 0163, 0388, 0403, 0404, 0406, 0409 Hisawa - 0035, 0398 Hitachi - 0020, 0281 Hivion - 0282 HNE - 0153 Homecast - 0283 Houston - 0040, 0284, 0392 Humax - 0011, 0012, 0050, 0071, 0085, 0086, 0094, 0097, 0121, 0122, 0123, 0124, 0128, 0129, 0149 Hu[...]

2.1.3   Universal RC code list 17/26 KR - 0023, 0412, 0414 Kreatel - 0296 Kreiselmeyer - 0033, 0155, 0388 K-SAT - 0164 Kyostar - 0019, 0153, 0297, 0412 L and S Electronic - 0010, 0153 Lasat - 0010, 0024, 0028, 0048, 0049, 0050, 0056, 0152, 0153, 0154, 0161, 0401, 0402, 0416 Lemon - 0419 Lenco - 0010, 0019, 0045, 0051, 0152, 0161, 0164, 025[...]

2.1.3   Universal RC code list 18/26 Mediamarkt - 0026 Mediasat - 0030, 0156, 0158, 0396, 0407, 0427 Medion - 0010, 0028, 0059, 0062, 0132, 0153, 0164, 0402 Medison - 0164 Mega - 0054, 0391 Melectronic - 0165 Meta - 0305 Metronic - 0013, 0014, 0019, 0023, 0024, 0027, 0164, 0165, 0169, 0306, 0385, 0395, 0412, 0423 Metz - 0033, 0155, 0388 Mi[...]

2.1.3   Universal RC code list 19/26 Novis - 0035, 0398 Now - 0317 NTC - 0046 Numericable - 0380 Oceanic - 0039, 0042 Octagon - 0019, 0023, 0036, 0392, 0401, 0412 Okano - 0026, 0046, 0047 Ondigital - 0393 Optex - 0037, 0040 Optus - 0156, 0168, 0171 Orbit - 0031, 0381 Orbitech - 0019, 0154, 0156, 0158, 0408, 0410 Origo - 0042, 0157 Oritron [...]

2.1.3   Universal RC code list 20/26 Profile - 0163 Promax - 0020 Prosat - 0021, 0023, 0044, 0234, 0395, 0413 Prosonic - 0421 Protek - 0039, 0329 Provision - 0024 Pye - 0159 Pyxis - 0166 Quadral - 0010, 0021, 0023, 0028, 0163, 0173, 0234, 0395, 0402, 0410, 0413, 0420 Quelle - 0033, 0152, 0161, 0394 Quiero - 0060 Radiola - 0054, 0391 Radix [...]

2.1.3   Universal RC code list 21/26 Satplus - 0154 Satstar - 0336 Schacke - 0412 Schneider - 0028, 0059, 0062, 0154, 0163, 0422 Schwaiger - 0037, 0039, 0153, 0154, 0160, 0161, 0169, 0390, 0410, 0411 Scientific Atlanta - 0337 SCS - 0152 Sedea Electronique - 0153, 0170 Seemann - 0026, 0030, 0032, 0402, 0407 SEG - 0010, 0019, 0028, 0035, 016[...]

2.1.3   Universal RC code list 22/26 Strong - 0010, 0019, 0023, 0028, 0045, 0168, 0170, 0271, 0402 STVI - 0013 Sumida - 0026 Sunny Sound - 0010, 0402 Sunsat - 0164, 0351, 0407 Sunstar - 0010, 0026, 0050, 0153, 0402 Sunstech - 0352 Super Sat - 0162 Super Track - 0353 SuperGuide - 0354 Supermax - 0171 SVA - 0355 Swisstec - 0303 Systec - 0153[...]

2.1.3   Universal RC code list 23/26 Thomson - 0006, 0020, 0057, 0060, 0103, 0106, 0117, 0141, 0150, 0151, 0152, 0156, 0161, 0163, 0164, 0396 Thorens - 0039, 0361 Thorn - 0020 Tioko - 0037, 0153 Tokai - 0391 Tonna - 0020, 0034, 0040, 0158, 0164, 0400 Topfield - 0126, 0362, 0382 Toshiba - 0363 TPS - 0058, 0364 Tratec - 0365 Triad - 0031, 00[...]

2.1.3   Universal RC code list 24/26 Wewa - 0020 Winersat - 0035, 0398 Wintergarten - 0395 Wisi - 0020, 0031, 0032, 0033, 0155, 0158, 0161, 0388, 0397, 0403, 0410, 0418 Woorisat - 0024 World - 0398 Worldsat - 0163, 0376 Xcom Multimedia - 0186 Xoro - 0377 Xrypton - 0010, 0402 XSat - 0164, 0173 Zaunkonig - 0419 Zehnder - 0010, 0024, 0027, 00[...]

2.1.3   Universal RC code list 25/26 Dual - 0084 Eltax - 0004, 0081 Euroline - 0085 Finlux - 0086 Fintec - 0087 Futronic - 0088 Goodmans - 0174, 0175, 0267, 0268 Harman/Kardon - 0064 Hitachi - 0024, 0166, 0167, 0168 Hyundai - 0089 Infotech - 0090 Jamo - 0091 JBL - 0092 JVC - 0008, 0016, 0020, 0050, 0123, 0124, 0125, 0187, 0188, 0190, 0191,[...]

2.1.3   Universal RC code list 26/26 Sony - 0006, 0014, 0023, 0038, 0040, 0113, 0114, 0115, 0116, 0117, 0152, 0182, 0183, 0184, 0185, 0186, 0197, 0202, 0203, 0204, 0205, 0206, 0207, 0208, 0215, 0216, 0230, 0237, 0238, 0239, 0242, 0245, 0253, 0254, 0255 T+A - 0107 TCM - 0111, 0273, 0274, 0275, 0276 Teac - 0108, 0121, 0122, 0269, 0270, 0271,[...]

2.1.4Batteries Open the battery cover on the back of the remote control to insert the 3 batteries supplied (Type AAA-LR03-1.5V). Make sure the + and - ends of the batteries line up correctly (+ and - are marked inside). Remove the batteries if you are not using the remote control for a long time. Dispose of batteries according to the end o[...]

2.2.1   Channel overview 1/5 While watching TV, press OK to open the Channel overview. This overview shows the TV channels and possible radio stations installed on your TV. Navigate to a channel or station with the u or v , w or x keys. Press OK to watch or listen to the selected channel or station. Press Back b to leave the channel overvi[...]

Downloaded From TV-Manual.com Manuals[...]

2.2.1   Channel overview 3/5 Reorder You can reposition channels within the overview. 1 Select Reorder in the Options o menu to start reordering channels. 2 Highlight a channel and press OK. ... 3 Reposition the channel where you want it with the navigation keys or, alternatively, enter the new position directly with the number keys. 4 Pre[...]

Downloaded From TV-Manual.com Manuals[...]

2.2.1   Channel overview 5/5 Show hidden channels You can show all channels, including all hidden channels. You can unhide or hide channels. 1 Select Show hidden channels from the Options o menu. 2 Navigate to a channel. 3 Press Options o and select Hide or Unhide channel. You can navigate to another channel and do the same. To exit the Sh[...]

2.2.2Home h The Home menu lists the activities you can do with your TV. Press h to open the Home menu. To start an activity, highlight the desired item with the navigation keys and press OK. You can add an activity, always linked to a device, with the Add your devices item. To exit the Home menu, press h again. Downloaded From TV-Manual.co[...]

2.2.3Add your devices When you have connected a device to the TV, always add this device as an item in the Home menu. With this item in the Home menu, you can easily switch the TV to this device. In the Home menu, select Add your devices and press OK. Follow the instructions on screen. The TV asks you to select the device and the connector[...]

2.2.4Setup The Setup item in the Home menu holds most TV settings. In the Setup menu you can ... • set picture, sound or Ambilight settings • set some special features • update or re-install TV channels • connect to a network • update the TV software • ... In the Home menu, select Setup and press OK. Select an item with the w o[...]

2.2.5Options o The Options menu offers convenient settings related to what is on screen. Press Options o in any circumstance to see which options are available. To exit, press Options o again. Downloaded From TV-Manual.com Manuals[...]

2.2.6   Guide g 1/2 You can view a list of scheduled TV programmes with the Guide menu (only for digital broadcast). Also, use the Guide key to view the list of your photos, music or videos from a connected PC network or USB memory device. While watching TV, press Guide g to open the Programme guide, if this information is available. ... D[...]

Downloaded From TV-Manual.com Manuals[...]

2.3.1Switch channels To switch TV channels, press P + or — on the remote control. You can use the number keys if you know the channel number. To switch back to the previous viewed channel, press Back b . If digital broadcasting is available, digital radio stations are installed during installation. Switch to a radio channel as you would [...]

Downloaded From TV-Manual.com Manuals[...]

2.3.3Switch to standby If the TV is on, press O on the remote control to switch to standby. The red standby key indicator is on. Although the TV consumes very little power when in standby, energy continues to be consumed. When the TV is not in use for an extended period of time, we advise to switch the TV off with the O key on the TV and t[...]

2.3.4Smart Settings You can set the TV to the predefined setting that is best for what you're watching at the moment. Each setting combines picture, sound and Ambilight. While watching TV, press Options o and select Picture and sound. Press OK. Select Smart settings and press OK. Select a setting from the list and press OK. • Person[...]

2.3.5   Picture format 1/2 If black bars appear in the screen, adjust the picture format. Ideally change the picture format to a format that fills the screen. While watching TV, press Format f to switch on the Picture format menu, select an available picture format and press OK. If subtitles are hidden in a programme, press u to shift the [...]

2.3.5   Picture format 2/2 Super zoom Removes the black bars on the side of 4:3 broadcasts. The picture is adjusted to fit the screen. 4:3 format Displays programme in the 4:3 format. Movie expand 16:9 Scales the format to 16:9. Wide screen Stretches the format to 16:9. Unscaled Maximum sharpness. Distortion may appear on borders. Black ba[...]

2.4.1Ambilight on With Ambilight, you will enjoy a more relaxed viewing experience and improved perceived picture quality. Dim the lighting conditions in the room for the best Ambilight effect. To switch Ambilight on or off, press Ambilight on the remote control. Caution To avoid bad infrared remote control reception, place your devices ou[...]

2.4.2Ambilight settings In the Ambilight menu you can set or adjust the following Ambilight settings … While watching TV, press h > Setup > Ambilight. Ambilight Switches Ambilight on or off. Active mode Adjusts the speed at which Ambilight responds to the onscreen images. Brightness Changes the light output of Ambilight. Colour Set[...]

2.4.3LoungeLight When the TV is on standby, you can switch Ambilight on and create an Ambilight LoungeLight effect in your room. To switch Ambilight on while the TV is on standby, press Ambilight on the remote control. To change the LoungeLight colour scheme, press Ambilight for 3 seconds. Downloaded From TV-Manual.com Manuals[...]

2.5Watch a DVD movie To watch a DVD movie using your DVD player, switch on your DVD player, insert a disc and press Play on the player. The DVD picture automatically appears on the screen. If the DVD picture does not appear, press h on the remote control and select DVD player. Press OK. Wait a few seconds until the DVD picture appears. If [...]

2.6Watch TV using a digital receiver When you watch TV using a digital receiver, with a subscription from a cable or satellite company, connect the receiver and add the receiver to the Home menu. To add the receiver to the Home menu, read Use your TV > Menus > Add your devices. To watch the receiver programme, switch on the receiver.[...]

2.7Watch TV from a connected device When you have added a connected device as an item to the Home menu, you can easily and directly select that device to watch its programme. To add the device to the Home menu, read Use your TV > Menus > Add your devices. To watch TV from a connected device, press h and select the device item in the [...]

2.8.1Net TV benefits Net TV offers Internet services and websites tailored for your TV. Use the TV remote control to browse the Net TV Internet pages. You can play movies, view pictures or listen to music, consult infotainment, play games and much more, all set up for your TV screen. Specifics • Because Net TV is an online system, it can[...]

2.8.2What you need To enjoy Net TV, you need to connect the TV to a router with a high speed connection to the Internet. Read the chapter Setup > Network. Once the connection is made, select Net TV in the Home menu to start the Net TV onscreen setup. Read the chapter Net TV > First use. Downloaded From TV-Manual.com Manuals[...]

Downloaded From TV-Manual.com Manuals[...]

2.8.3   First use 2/3 How to register To register, you need an email address and a PC connected to the Internet. If you skip the registration at first use, you can register from the Net TV start page later on. To start the Net TV registration, you need to enter your email address on the TV screen. Use the keypad on the remote control as yo[...]

2.8.3   First use 3/3 Parental control benefits With Parental control switched on ... • you can lock and unlock services and/or categories of services • some services unsuitable for children are locked from the start but can be unlocked Specifics • Only services on the Net TV pages can be locked. Advertisements and open Internet webs[...]

2.8.4   Browse Net TV 1/6 To browse Net TV, close this user manual and press Net TV on the remote control or select Browse Net TV in the Home menu and press OK. The TV links up to Net TV and opens the start page. To exit Net TV, press Net TV again or press h , and select another activity. ... Downloaded From TV-Manual.com Manuals[...]

2.8.4   Browse Net TV 2/6 The Net TV start page The Net TV start page shows your favourite services and some recommended services. You can browse Net TV from this page. Select a Net TV service with u or v , w or x keys. To open a service, press OK. Press Back b to go back one page. Press Net TV to return to the Net TV start page. The Brows[...]

2.8.4   Browse Net TV 3/6 Mark favourites You can mark up to 12 favourite services. To mark a service as a favourite, select the service icon and press Options o . Select Mark favourite and press OK. All your favourite services are shown in the Net TV start page. In the Browse all page favourite services are marked with a star F . Use the [...]

2.8.4   Browse Net TV 4/6 Open Internet websites With Net TV you can link up to the open Internet. You can view any website you like but remember that most open Internet websites are not tailored to be viewed on a TV screen and certain necessary plug-ins (e.g. to view pages or videos) are not available on your TV. Enter open Internet On th[...]

2.8.4   Browse Net TV 5/6 Scrolling open Internet pages Use the P - and + to scroll pages up or down. Zoom open Internet pages You can zoom open Internet in or out. Press Format f . Use the arrows up or down to zoom in or out. ... Downloaded From TV-Manual.com Manuals[...]

2.8.4   Browse Net TV 6/6 Clear history You can clear the Net TV memory. To clear the Parental control code, passwords, cookies and history, press h > Setup > Installation > Clear Net TV memory. Koninklijke Philips Electronics N.V. bears no responsibility regarding the content and the quality of the content provided by the content[...]

Downloaded From TV-Manual.com Manuals[...]

2.8.6   Parental control 1/3 With Net TV Parental control you can lock Net TV services and service categories. When a service is locked, you need to enter a code to open the service or category. To lock a service, Parental control needs to be switched on. Parental control is switched on when a lock icon appears when you link up with Net TV[...]

2.8.6   Parental control 2/3 Lock a service or category On the Net TV start page or Browse all page, select a service or category. Press Options o , select Lock service and press OK. The service is locked when a lock symbol appears on top of the service icon. Unlock To unlock a service or category, select the service and press Options o an[...]

2.8.6   Parental control 3/3 Did you forget your code ? If you forgot your Parental control code, you can clear the Net TV memory and enter a new code. Read the chapter Use your TV > Net TV > Clear history. Downloaded From TV-Manual.com Manuals[...]

2.8.7Clear history Warning If you clear the Net TV memory with Clear history, you need to redo the first use registration when you link up to Net TV again. If you have registered before, you can restore your former favourite services and former locks. Clear history You can clear the Net TV memory. To clear the Parental control code, passwo[...]

3.1.1Select a teletext page Most TV channels broadcast information through teletext. While watching TV, press Teletext. To exit teletext, press Teletext again. To select a page … • Enter the page number with the number keys. • Press P +/- or u or v or b to view the next or the previous page. • Press a colour key to select a colour-[...]

3.1.2Select a teletext language Some digital TV broadcasters have several teletext languages available. You can set your primary and secondary language. Press h > Set up > Installation > Languages > Primary or Secondary teletext and select your preferred teletext languages. Downloaded From TV-Manual.com Manuals[...]

Downloaded From TV-Manual.com Manuals[...]

3.1.4Select T.O.P. teletext You can easily jump from one subject to another without using page numbers with T.O.P. teletext. Not all channels broadcast T.O.P. teletext. Press Info i when teletext is switched on. The T.O.P. overview appears. Select a subject and press OK to view the page. Downloaded From TV-Manual.com Manuals[...]

3.1.5Search teletext In teletext, you can quickly jump to a subject linked to a series of page numbers. Also, you can search for specific words in teletext pages. Switch on teletext and press OK. The first word or first index number of the page is highlighted onscreen. Jump to the next word or number on the page with w or x , u or v . Pres[...]

3.1.6   Teletext options 1/2 When in teletext, press Options o on the remote control to reveal hidden info, let subpages cycle automatically, change the character setting, freeze a teletext page, view the TV channel and teletext simultaneously or show a teletext page full screen again. Freeze page Stop the automatic rotation of subpages or[...]

3.1.6   Teletext options 2/2 Cycle subpages If subpages are available for the selected page, you can make subpages cycle automatically. Language Some languages use a different set of characters. Switch to the other character group to show the text correctly. Enlarge teletext page You can enlarge the teletext page for more comfortable readi[...]

3.1.7Digital text (UK only) Some digital TV broadcasters offer dedicated digital text or interactive services on their digital TV channels, for example BBC1. These services include normal teletext with the number, colour and navigation keys to select and navigate. While watching TV, press Teletext and navigate to select or highlight items.[...]

3.1.8Teletext 2.5 Teletext 2.5 offers more colours and better graphics, if broadcast by the TV channel. Teletext 2.5 is activated as a standard factory setting. To switch it off select h > Setup > Installation > Preferences > Teletext 2.5. Downloaded From TV-Manual.com Manuals[...]

3.2Favourite channels After you have finished the installation, all TV and radio channels are added to the Channel overview. In this overview, you can mark channels as favourites and set the Channel overview to only show these favourites. While watching TV, press OK to open the Channel overview. With a channel highlighted, press Options o [...]

3.3.1   Programme guide 1/3 The Programme guide is an onscreen guide of scheduled TV programmes. This guide is provided by the broadcasters or Net TV. You can set a reminder to show a message when a programme starts or select programmes by genre. While watching TV, press Guide g to open the Programme guide. If available, a list of the curr[...]

3.3.1   Programme guide 2/3 Navigate through the list to select a programme. Info i To open the programme details and summary, press Info i . To show a message onscreen when the programme starts, select Set reminder and press OK. The programme is marked with © . To cancel the message, select Clear reminder and press OK. To switch to the T[...]

3.3.1   Programme guide 3/3 • Search by genre View all programmes by genre. Select a programme and press Info i for more info or to set a reminder. • List of preferred programmes Set channels to appear in the Programme guide list (max. 50 channels). Specifics If the Programme guide information comes from a broadcaster/operator, the fir[...]

3.3.2Setup To select where the Programme guide information comes from, press h > Setup > Installation > Preferences > Programme guide. From network Until you link up with NetTV, guide information comes from the broadcaster. From network will switch to the Internet for guide information as soon as the TV is connected to Net TV. [...]

3.4.1Sleeptimer With Sleeptimer you can switch the TV to standby or out of standby at a specified time. Close the user manual and press h > Setup > Features > Sleeptimer. With the Sleeptimer slider bar you can set the time up to 180 minutes in steps of 5 minutes. If set to 0 minutes, Sleeptimer is switched off. You can always swit[...]

3.4.2   Child lock 1/2 To prevent children from watching TV, you can lock the TV or block age rated programmes. Set your personal code Before you set Child lock to lock the TV or set an age rating, set your personal lock code in h > Setup > Features > Set code. Enter the four-number code with the number keys. You can always change[...]

3.4.2   Child lock 2/2 Parental rating Select Parental rating as Child lock setting, so that an age can be set in the Parental rating age list. Set the age of your child. Programmes with an equal or higher rating will be blocked. To set an age rating in this list, read More on … > Timers and locks > Age rating. Forgotten your code?[...]

3.4.3Age rating Some digital broadcasters, depending on your country, have their programmes rated. When the rating is equal or higher than the rating you have set for your child’s age, the programme will be blocked. To set an age rating, press h > Setup > Features > Child lock and select Parental rating. With Parental rating sel[...]

3.5.1   Subtitles 1/3 Programme subtitles are available most of the time. You can set subtitles to display constantly. Depending on the channel, an analogue or digital channel, a different method is used to set constant subtitles. For digital channels, a preferred subtitle language can be set. For analogue channels To have subtitles consta[...]

3.5.1   Subtitles 2/3 Subtitle menu To switch subtitles on constantly, press Subtitle. Select Off, On or On during mute. With On during mute, the TV displays subtitles only when the sound is muted with m . ... Downloaded From TV-Manual.com Manuals[...]

3.5.1   Subtitles 3/3 Digital channel subtitle languages If subtitles are available on digital channels, you can select a preferred subtitle language from a list of broadcast languages. See h > Setup > Features > Subtitle language. Select a subtitle language from the list of available languages and press OK. The preferred subtitle[...]

3.5.2Audio languages Digital TV channels can broadcast several audio languages that go with the programme. You can set your preferred languages to switch to when these audio languages are broadcast. To set your preferred audio languages, press h > Setup > Installation > Languages > Primary language. You can also set a secondary[...]

3.6.1   Browse USB 1/2 Watch photos or play music and videos on TV from a USB memory device. Insert a USB device in the USB connector on the left hand side of the TV while the TV is switched on. The TV detects the device and opens a list showing the content of the USB device onscreen. If the content does not show, press h > Browse USB a[...]

3.6.1   Browse USB 2/2 Watch videos Select a video in the Guide menu and press play P . To pause the video, press pause P . To fast forward, press Q once to go slow, press twice to go fast. Press again for normal speed. Press Options o to change to Full screen, Small screen, Play once, etc. To exit Browse USB, press h and select another ac[...]

3.6.2   Browse PC Network 1/2 Watch photos or play music and videos on TV from a PC or another storage device in your home network. To browse your PC network, first set up the network connection, read Setup > Network. If the network is not installed the first time you try to Browse PC network, the Network installation starts. Follow the[...]

3.6.2   Browse PC Network 2/2 To pause, press P again. To jump to the next file, press x or P +. To jump to the previous file, press w or P -. To fast forward a music file, press Q . Press Options o to Play once, Repeat, Shuffle, Rotate and much more. Watch videos Select a video in the Guide menu and press play P . To pause the video, pres[...]

3.7   Scenea 1/3 With Scenea, you can set a photo as a 'wallpaper' photo on your screen. Use any photo from your collection. Press h to open the Home menu, select Scenea and press OK. The wallpaper photo is shown and there is no sound. To exit Scenea, press any key on the remote control. ... Downloaded From TV-Manual.com Manuals[...]

3.7   Scenea 2/3 We recommend setting the TV to the energy conscious Standard settings before you switch on Scenea. Press Options o and select Picture and sound > Smart settings > Standard. Select a new photo 1 Connect a USB device that holds your new photo to the TV. This photo must be in a JPEG format. 2 Highlight the photo in the [...]

3.7   Scenea 3/3 Limitations When Scenea is on, the TV will automatically switch to standby after 4 hours. The TV will show a message 1 minute before switching to Standby. The switching to Standby prevents unnecessary energy use in case you forget that Scenea is switched on. If the Sleeptimer is set, the TV will also switch to standby afte[...]

3.8.1Hearing impaired Some digital TV channels broadcast special audio and subtitles adapted for people who are hearing impaired. To switch on hearing impaired audio and subtitles, press h > Setup > Installation > Languages > Hearing impaired. Select On and press OK. The TV switches to hearing impaired audio and subtitles, if a[...]

3.8.2Visually impaired Some digital TV channels broadcast special audio adapted for people who are visually impaired. The normal audio is mixed with extra commentary. To switch on visually impaired audio, press Options o while watching the digital TV channel and select visually impaired. Select On and press OK. The TV switches to visually [...]

4.1.1Smart settings You can set the TV to the predefined setting that is best for what you're watching at the moment. Each setting combines picture, sound and Ambilight. While watching TV, press Options o and select Picture and sound. Press OK. Select Smart settings and press OK. Select a setting from the list and press OK. • Person[...]

4.1.2   Picture 1/4 In the Picture menu, you can adjust all picture settings individually. Close this user manual and press h > Setup > Picture. Use w or x , u or v to select and adjust a setting. Press OK to activate a setting. • Settings assistant Start the Settings assistant to guide you through basic picture settings easily. Fo[...]

Downloaded From TV-Manual.com Manuals[...]

Downloaded From TV-Manual.com Manuals[...]

4.1.2   Picture 4/4 - MPEG artefact reduction Smooths the digital transitions in the picture. - Colour enhancement Makes the colours more vivid and improves the resolution of details in bright colours • PC mode Sets the TV to the ideal predefined computer setting in case a computer has been connected. • Light sensor Adjusts the picture[...]

4.1.3   Sound 1/3 In the Sound menu, you can adjust all sound settings individually. Close the user manual and press h > Setup > Sound. Use w or x , u or v to select and adjust a setting. Press OK to activate a setting. • Bass Changes the low tones of the sound. Select each bar to change the setting. • Treble Changes the high ton[...]

4.1.3   Sound 2/3 • Volume — visually impaired Changes the volume of the selected visually impaired audio language. (Only for UK.) • Audio language Shows the list of broadcast audio languages of digital TV channels. You can set your preferred audio language in h > Setup > Installation > Languages > Primary audio. • Dual[...]

4.1.3   Sound 3/3 • Surround Switches the TV automatically to the best surround sound mode dependant on the broadcast. Select On or Off. • Headphones volume Changes the volume of the headphones. You can mute the TV speakers with m . • Delta volume Levels out volume differences between channels or connected devices. First, switch to t[...]

4.1.4Ambilight In the Ambilight menu, you can adjust all Ambilight settings individually. Close the user manual and press h > Setup > Ambilight. Use w or x , u or v to select and adjust a setting. Press OK to activate a setting. For more on Ambilight, read Use your TV > Use Ambilight. Downloaded From TV-Manual.com Manuals[...]

4.1.5Factory settings You can return to the original factory settings. Only picture, sound and Ambilight settings will be reset. Close the user manual and press h > Setup > Installation > Factory reset and press OK. Downloaded From TV-Manual.com Manuals[...]

4.2.1   Reorder and rename 1/2 After the first installation, you might want to reorder or rename installed channels. Organise TV channels in the Channel overview according to your own preference or give them a recognisable name. While watching TV, press OK to open the Channel overview. The Channel overview shows the TV channels and radio s[...]

4.2.1   Reorder and rename 2/2 3 Reposition the channel where you want it with the navigation keys or, alternatively, enter the new position directly with the number keys. 4 Press OK to confirm the position. You can highlight another channel and do the same. To stop Reorder, press o and select Exit reorder. Rename You can rename a channel.[...]

4.2.2   Update channels 1/2 When the TV was switched on for the first time, a full installation of channels was performed. You can set the TV to add or remove digital channels automatically. You can also manually start the channel update. Automatic update To set the TV to update digital TV channels automatically, leave the TV in standby mo[...]

4.2.2   Update channels 2/2 Manual update To update channels yourself at any time, press h > Setup > Installation > Channel installation > Automatic installation and press OK. Start the update and select Update Channels. The update may take a few minutes. Downloaded From TV-Manual.com Manuals[...]

4.2.3Reinstall channels When the TV was switched on for the first time, a full installation of channels was performed. You can redo this full installation all over again to set your language, country and install all available TV channels. Full installation To reinstall the TV, press h > Setup > Installation > Channel installation [...]

4.2.4   Digital reception quality 1/2 If you receive digital TV broadcasting (DVB) from your own antenna (DVB-T) or use the TV tuner to receive digital cable channels (DVB-C), you can verify the quality and signal strength of a channel. If the reception is poor, you can reposition your antenna to try to improve the reception. For best resu[...]

4.2.4   Digital reception quality 2/2 You can enter a specific digital frequency yourself. Select the frequency, position the arrows on a number with x and w and change the number with u and v . Press Search to verify this frequency. If you receive the channel with DVB-C, the options Symbol rate mode and Symbol rate are shown. For Symbol r[...]

4.2.5   Manual installation of analogue channels 1/2 Analogue TV channels can be manually tuned-in channel by channel. To start the manual installation of analogue channels, press h > Setup > Installation > Channel installation > Manual install - analogue. Follow each step in this menu. You can redo these steps until you have a[...]

4.2.5   Manual installation of analogue channels 2/2 3 Fine tune — Fine tune the found channel with u and v . Press Done once the channel is fine tuned. 4 Store — A found channel can be stored on the current channel number with Store current channel or as a new channel number with Store as new channel. Downloaded From TV-Manual.com Man[...]

4.2.6Fine tune analogue channels If the reception of an analogue TV channel is poor, you can try to fine tune the TV channel. To fine tune analogue channels, press h > Setup > Installation > Channel installation > Manual install - analogue > Fine tune. Fine tune the channel with u and v . Press Done once the channel is fine [...]

4.2.7DVB-T or DVB-C If both DVB-T and DVB-C reception is available in your country, and this TV is prepared for both DVB-T and DVB- C for your country, you need to select DVB-T or DVB-C before you install TV channels. To select DVB-T or DVB-C reception, press h > Setup > Installation > Channel installation > Antenna/Cable DVB. [...]

4.2.8Clock settings In some countries, digital TV broadcasts do not send UTC — Coordinated Universal Time information. Therefore, winter and summer time changes might be ignored. You can correct this with the clock settings. If the TV shows the incorrect time, press h > Setup > Installation > Clock > Auto clock mode and selec[...]

4.3.1Network benefits PC network If the TV is connected to your PC network, you can play photos, music and movies from a computer or storage device in that network. Once the network is installed, select Browse PC network in the Home menu to view the PC content. Net TV If the TV is connected to the PC network, which is connected to the Inte[...]

4.3.2   What you need 1/2 To connect the TV to a PC network and Internet you need a router in your PC network. The router needs to be set to DHCP On. To enjoy Net TV you need to connect the TV to a router with a high speed connection to the Internet. The TV connection to the router can either be wired or wireless. If you choose a wired con[...]

4.3.2   What you need 2/2 The PC network feature is DLNA certified. You can use Microsoft Windows XP or Vista, Intel Mac OSX or Linux on your computer. To share PC content on your TV, you need recent media server software on your computer. A Windows Media Player 11 or similar. Some media server software needs to be set to share files with [...]

4.3.3   Wireless installation 1/3 The onscreen instructions help you to install the wireless network. Switch on your router before you start the network installation. If your wireless network is secured, have the encryption key ready to enter onscreen. To start the wireless network installation on the TV, close the user manual, press h >[...]

4.3.3   Wireless installation 2/3 Name and security The TV scans for your network router. Found routers appear in a list on screen. If several routers are found, select your router in the list and press OK. If the router name is unknown to you or you do not recognize your router's name, look up the SSID (Service Set Identifier) in the[...]

4.3.3   Wireless installation 3/3 If you have WPA security on your router, enter the passphrase with the characters on the remote control. If you have WEP security, the TV asks for the WEP encryption key in hexadecimal numbers. Find this hexadecimal key in the router software on your PC. Write down the first key of the WEP keys list and en[...]

4.3.4Wired installation The onscreen procedure helps you to install the wired network. Connect the router to the TV using a network cable and switch on the router before you start the network installation. To start the wired network installation, close the user manual, press h > Setup > Installation > Network > Network installa[...]

4.3.5Network settings The TV's network settings that are used to connect to your router are standard and set to automatic. This ensures easy connection with any available network. If you have problems with the network connection, you might want to adjust the settings so that they are appropriate for your home network. If you are unsur[...]

4.3.6 PC Media server settings Media servers need to be set for sharing their files and folders. Follow the instructions closely to set your specific server. Windows Media Player v11 on Windows Vista Set for network sharing In Windows Media Player select Library from the menu and select Media sharing . In the Media Sharing window, check the Share m[...]

Set Network discovery to On . Set File sharing to On . Go back to the Media Sharing window in Windows Media Player and check the Share my media box. Click OK . When the TV is connected, by the router, to the PC and everything is switched On, the Media sharing window will show the TV as an Unkown Device . Select the device and click Allow . You can [...]

With Advanced Options open, you can add specific folders to the list to share. Click Add . In the Add Folder window select a folder with music, photos or videos you want to share with other devices (your TV). Click OK . In the Add To Library window the newly added folder is shown. You can add more folders to share. Click the OK button to add the fi[...]

Windows Media Player v11 on Windows XP Set for network sharing In Windows Media Player select Library from the menu and select Media sharing … In the Media Sharing window, check the Share my media box. When the TV is connected, by the router, to the PC and everything is switched On, the Media sharing window will show the TV as an Unkown Device . [...]

With Advanced Options open, you can add specific folders to the list to share. Click Add . In the Add Folder window select a folder with music, photos or videos you want to share with other devices (your TV). Click OK . In the Add To Library window the newly added folder is shown. You can add more folders to share. Click the OK button to add the fi[...]

TVersity v.0.9.10.3 on Windows XP Set for network sharing Click the Settings tab and click the Start Sharing button. A pop-up window tells you that the media server service is started. Click OK . Click the Sharing tab. Set folders for sharing Click the green plus icon and select Add folder… In the Add media pop-up window, click the Browse button.[...]

In the Browse for Folder window select a folder with music, photos or videos you want to share. Click OK . Now everything is set to enjoy music, photos and videos on your TV. Twonky Media v4.4.2 on Macintosh OS X Set for network sharing In Twonky Media click Basic Setup > First steps . In this window you can change the server name that appears o[...]

Downloaded From TV-Manual.com Manuals[...]

4.4.1Pixel Plus link Some other devices, DVD or Blu-ray Disc players, might have their own picture quality processing. To avoid bad picture quality from interference with the TV processing, the picture processing of these devices should be discarded. With Pixel Plus link you can discard this picture quality processing. Close this user manu[...]

4.4.2Audio sync When a Home Theatre System is connected, the picture on your TV and the sound from the Home Theatre System should be syncronized. A mismatch is visible in scenes with people talking. When they finish sentences before their lips stop moving, you need to adjust the Audio sync delay on the Home Theatre System. Consult the user[...]

4.5.1From the Internet In some cases, it might be necessary to update the TV software. If your TV is connected to a router, which is connected to the Internet, you can update the TV software directly from the Internet. You need a high speed Internet connection. Close this user manual, press h > Setup > Software update > Update now[...]

4.5.2   With a USB memory device 1/3 In some cases, it might be necessary to update the TV software. Start the software update on the TV. Then, download the TV software from the Internet onto your PC. Use a USB memory device to upload the software from your PC to the TV. Preparation You need a PC with a high speed Internet connection. You [...]

4.5.2   With a USB memory device 2/3 1 Identification Close this user manual, press h > Setup > Software update > Update now and press OK. Select USB and press OK. Follow the onscreen instructions. The TV will ask to insert the USB device into the USB connector at the side of the TV. 2 Download from PC to USB Once the TV identific[...]

4.5.2   With a USB memory device 3/3 3 Download from USB to TV Insert the USB memory device back into the TV. Follow the onscreen instructions to start the new TV software update. The TV switches off for 10 seconds and back on again. Please wait. Do not … • use the remote control • remove the USB device from the TV during the softwar[...]

5.1.1Power cable Make sure the power cable is securely inserted in the TV. Make sure that the power plug in the wall socket is accessible at all times. When disconnecting the power cable, always pull the plug, never the cable. Although this TV has a very low standby power consumption, unplug the power cable to save energy if you do not use[...]

5.1.2Antenna cable Locate the antenna connection at the back of the TV. Insert the antenna cable securely in the Antenna a socket. Downloaded From TV-Manual.com Manuals[...]

Downloaded From TV-Manual.com Manuals[...]

5.2.2   HDMI 1/2 An HDMI connection has the best picture and sound quality. One HDMI cable combines video and audio signals. Use HDMI for High Definition (HD) TV signals. An HDMI cable transfers picture and sound signals in only one direction, the opposite to a scart cable. Do not use an HDMI cable longer than 5 m. ... Downloaded From TV-M[...]

5.2.2   HDMI 2/2 HDMI supports HDCP (High-bandwidth Digital Contents Protection). HDCP is a copy protection signal that comes with HD content (DVD disc or Blu-ray Disc). DVI to HDMI Use a DVI to HDMI adaptor if your device has only a DVI connection. Use one of the HDMI connectors and add an Audio L/R cable to DVI x HDMI, Audio In L/R for s[...]

5.2.3YPbPr — Component video Use the Component Video YPbPr connection together with an Audio Left and Right connection for sound. Match the YPbPr connector colours with the cable plugs when you connect. YPbPr can handle High Definition (HD) TV signals. Downloaded From TV-Manual.com Manuals[...]

5.2.4Scart A scart cable combines video and audio signals. Scart connectors can handle RGB video signals but cannot handle High Definition (HD) TV signals. Downloaded From TV-Manual.com Manuals[...]

5.2.5S-Video Use an S-Video cable together with an Audio Left and Right (cinch) cable. Match the Audio connectors’ colours with the cable plugs when you connect. Downloaded From TV-Manual.com Manuals[...]

5.2.6Video Use a Video (cinch) cable together with an Audio Left and Right (cinch) cable. Match the Audio connectors’ colours with the cable plugs when you connect. Downloaded From TV-Manual.com Manuals[...]

5.2.7VGA Use a VGA cable (DE15 connector) to connect a computer to the TV. With this connection you can use the TV as a computer monitor. You can add an Audio Left and Right cable for sound. Read Connections > More devices > TV as PC monitor. Downloaded From TV-Manual.com Manuals[...]

5.3.1DVD player Use an HDMI cable to connect the DVD player to an HDMI connector on the back of the TV. Downloaded From TV-Manual.com Manuals[...]

5.3.2   DVD Home Theatre System 1/3 First, use an HDMI cable to connect the device to the TV. Downloaded From TV-Manual.com Manuals[...]

5.3.2   DVD Home Theatre System 2/3 Finally, use a digital audio cinch cable to connect the device to the TV or alternatively, use the analogue Audio Out L/R. Downloaded From TV-Manual.com Manuals[...]

5.3.2   DVD Home Theatre System 3/3 Audio Out L/R If there is no digital audio output on the Home Theatre System, you can use the TV's analogue Audio Out L/R connection. Audio and Video synchronisation (sync) If the sound does not match with the video on screen, you can set a delay on most DVD Home Theatre Systems to match the sound a[...]

5.3.3   DVD Recorder 1/2 First, use 2 antenna cables to connect the antenna to the DVD Recorder and the TV. Downloaded From TV-Manual.com Manuals[...]

5.3.3   DVD Recorder 2/2 Finally, use a scart cable to connect the DVD Recorder to a scart connector on the back of the TV. Downloaded From TV-Manual.com Manuals[...]

5.3.4   Digital receiver or Satellite receiver 1/2 First, use 2 antenna cables to connect the antenna to the receiver and the TV. Downloaded From TV-Manual.com Manuals[...]

5.3.4   Digital receiver or Satellite receiver 2/2 Finally, use a scart cable to connect the receiver to the back of the TV Downloaded From TV-Manual.com Manuals[...]

5.3.5   Digital receiver and DVD Recorder 1/3 First, use 3 antenna cables to connect the digital receiver and the DVD Recorder to the TV. Downloaded From TV-Manual.com Manuals[...]

5.3.5   Digital receiver and DVD Recorder 2/3 Then use a scart cable to connect the digital receiver to the TV. Downloaded From TV-Manual.com Manuals[...]

5.3.5   Digital receiver and DVD Recorder 3/3 Finally, use 2 scart cables to connect the 2 devices and the TV. Downloaded From TV-Manual.com Manuals[...]

5.3.6  Digital receiver, DVD Recorder and Home Theatre System 1/5 First, use 3 antenna cables to connect the 2 devices and the TV. Downloaded From TV-Manual.com Manuals[...]

Downloaded From TV-Manual.com Manuals[...]

5.3.6  Digital receiver, DVD Recorder and Home Theatre System 3/5 Then use 2 Scart cables to connect the Digital receiver to the DVD Recorder and the DVD Recorder to the TV. Downloaded From TV-Manual.com Manuals[...]

5.3.6  Digital receiver, DVD Recorder and Home Theatre System 4/5 Then use an HDMI cable to connect the Home Theatre System to the TV. Downloaded From TV-Manual.com Manuals[...]

5.3.6  Digital receiver, DVD Recorder and Home Theatre System 5/5 Finally, use a digital audio cinch cable to connect the Home Theatre System to the TV. Downloaded From TV-Manual.com Manuals[...]

5.3.7Blu-ray Disc player Use an HDMI cable to connect the Blu-ray Disc player to an HDMI connector on the back of the TV. Downloaded From TV-Manual.com Manuals[...]

Downloaded From TV-Manual.com Manuals[...]

5.3.8   Digital HD receiver 2/2 Use an HDMI cable to connect the Digital HD receiver to the TV. Downloaded From TV-Manual.com Manuals[...]

5.4.1   Game console 1/3 The most practical connections for a game console are at the side of the TV. You can use an HDMI, S-Video or Video connection but never connect the S-Video and Video at the same time. If you use an HDMI or YPbPr connection, you can use the connectors at the back of the TV. See the next pages for how to connect your[...]

5.4.1   Game console 2/3 The most practical connections for a game console are at the side of the TV. Downloaded From TV-Manual.com Manuals[...]

5.4.1   Game console 3/3 Use an HDMI or the EXT3 (YPbPr and Audio L/R) cable to connect the game console to the back of the TV. Downloaded From TV-Manual.com Manuals[...]

5.4.2HD Game console Use an HDMI cable or YPbPr cables to connect a High Definition game console to the TV. Read also Connections > More devices > Game. Downloaded From TV-Manual.com Manuals[...]

Downloaded From TV-Manual.com Manuals[...]

5.4.4   Camcorder 1/3 The most practical connection for a camcorder is at the side of the TV. You can use an HDMI, S-Video or Video connection but never connect the S-Video and Video at the same time. See the next pages for how to connect your camcorder. ... Downloaded From TV-Manual.com Manuals[...]

5.4.4   Camcorder 2/3 The most practical connection for a camcorder is at the side of the TV. Downloaded From TV-Manual.com Manuals[...]

5.4.4   Camcorder 3/3 Use an HDMI or the EXT3 (YPbPr and Audio L/R) cable to connect the camcorder to the back of the TV. Downloaded From TV-Manual.com Manuals[...]

5.4.5   TV as PC monitor 1/3 You can connect the TV to your computer as a PC monitor. Before connecting the PC, set the PC monitor refresh rate to 60 Hz. You can connect the PC to the side of the TV or alternatively to the back. See the next pages to connect your computer. Ideal TV setting Set the TV Picture format to Unscaled for the shar[...]

Downloaded From TV-Manual.com Manuals[...]

5.4.5   TV as PC monitor 3/3 Use a VGA cable to connect the PC to the VGA connector and an audio L/R cable to connect the VGA Audio L/R to the back of the TV. Downloaded From TV-Manual.com Manuals[...]

5.4.6Decoder Use a scart cable to connect a decoder which decodes analogue antenna channels. Use the EXT1 or EXT2 connectors at the back of the TV. You have to assign the TV channel as a channel to be decoded. Then assign the connection where the decoder is connected. Close this user manual and press h > Setup > Installation > Dec[...]

5.5.1   EasyLink 1/2 If a device is equipped with the HDMI-CEC standard, the device and the TV can work together. Connect the TV to the device using an HDMI cable. The TV comes with EasyLink set to On. To switch EasyLink off, press h > Setup > Installation > Preferences > EasyLink. With EasyLink, the following functions are ava[...]

5.5.1   EasyLink 2/2 • System audio control If you connect an audio system, you can listen to the audio from the TV through the audio system. The TV speakers are muted automatically. The TV comes with the speakers set to EasyLink (Automatic). To switch the TV speakers off or permanently on, press h > Setup > Sound > TV speakers.[...]

Downloaded From TV-Manual.com Manuals[...]

5.6.1   Conditional Access Module (CAM) 1/2 Scrambled digital TV channels can be decoded with a Conditional Access Module (CAM). Digital TV service operators provide the CAM when you subscribe to their services. Contact a digital TV service operator for more information and terms & conditions. Insert a CAM Switch off the TV before inse[...]

5.6.1   Conditional Access Module 2/2 Watching a CAM service If a CAM is inserted and subscription fees have been paid, the TV shows the programme from the digital TV service provider. The applications, their function, the content and the onscreen messages all come from the CAM service. CAM settings To set passwords or PIN codes for the CA[...]

5.6.2Common Interface Plus CI+ This TV can handle the CI+ conditional access. CI+ allows service providers to offer premium HD digital programmes with a high level of copy protection. To insert a CI+ CAM, read the chapter CAM - Conditional Access Module. Downloaded From TV-Manual.com Manuals[...]

5.7.1Wireless network connection To set up the wireless network connection, read all chapters in Setup > Network. Downloaded From TV-Manual.com Manuals[...]

5.7.2Wired network connection To set up the wired network connection, read all chapters in Setup > Network. Connect the router to the TV using a network cable and switch on the router before you start the network installation. Downloaded From TV-Manual.com Manuals[...]

6.1Contact information Warning If your TV breaks down, NEVER try to repair the TV yourself. If the advice and suggestions in Troubleshooting do not help resolve the problem, try switching the TV off and back on again. Contact information — Consumer Care If the TV problem is not solved you can call the Philips Consumer Care hotline in you[...]

6.2   TV and remote control 1/2 The TV does not switch on • Verify the power cable connection. • Verify that the batteries of the remote control are not empty or weak. Verify their + / - orientation. • Unplug the power cable, wait for a minute and plug it back in. Try switching it on again. • You can use the buttons on the TV to sw[...]

6.2   TV and remote control 2/2 The TV switches off and the red light blinks • Unplug the power cable, wait a minute and plug it back in. Verify if there is enough space for ventilation. Wait until the TV has cooled down. If the TV does not restart from standby and the blinking occurs again, call Consumer Care. You forgot your code to un[...]

Downloaded From TV-Manual.com Manuals[...]

6.4   Picture 1/3 LightGuide is on but there is no picture • Verify if the antenna is connected properly. • Verify if the correct device is selected. The sound is on, but there is no picture • Verify the contrast or brightness setting in the menu. The TV picture is poor • Verify if the antenna is connected properly. • Non-earthed[...]

6.4   Picture 2/3 The picture has poor colour • Verify the colour settings in the Picture menu. Select any of the Smart settings in the Setup menu. • Verify the connections and cables of the connected devices. Picture delay when a game console is connected • To prevent picture delay, set the TV to game mode. Select Game in the Smart [...]

6.4   Picture 3/3 The picture position on screen is not correct • Some picture signals from some devices do not fit the screen properly. You can move the picture with the cursor keys on the remote control. Check the signal output of the device. Downloaded From TV-Manual.com Manuals[...]

6.5Sound There is a picture but no sound • Verify the volume is not set to 0. • Verify the sound has not been muted with m . • Verify that all cables are connected properly. • If no sound signal is detected, the TV automatically switches off the sound. This is proper operation and is not a malfunction. The sound is poor • Verify [...]

Downloaded From TV-Manual.com Manuals[...]

6.6   Devices 2/2 • Make sure that the System audio control in your HDMI- CEC audio devices is properly set up. Read the user manual that comes with your audio device. EasyLink Remote control • Some devices have identical functionality but do not support the specific remote control commands. Read Connections > EasyLink HDMI-CEC >[...]

Downloaded From TV-Manual.com Manuals[...]

6.8Network Wireless network not found or distorted. • Microwave ovens, Dect phones or other WiFi 11b devices in your neighbourhood might disturb the wireless network. • Make sure that the firewalls in your network allow access to the TV wireless connection. • If the wireless network does not work properly in your home, try the wired [...]

7.1Power and reception Product specifications are subject to change without notice. For more specification details of this product see www.philips.com/support. Power • Mains power : AC220-240V +/-10% • Ambient temperature : 5°C to 35°C • Power and standby power consumption, see the technical specification on www.philips.com Recepti[...]

7.2Display and sound Picture / Display • Display type: LCD Full HD W-UXGA • Diagonal size : - 32 inch / 82cm - 37 inch / 94cm - 40 inch / 101cm - 46 inch / 116cm - 52 inch / 132cm • Aspect ratio : Widescreen 16:9 • Panel resolution: 1920x1080p • Perfect Pixel HD picture enhancement • 1080p 24/25/30/50/60Hz processing • 100 Hz[...]

7.3Supported display resolutions Video formats Resolution — Refresh rate • 480i - 60 Hz • 480p - 60 Hz • 576i - 50 Hz • 576p - 50 Hz • 720p - 50 Hz, 60 Hz • 1080i - 50 Hz, 60 Hz • 1080p - 24 Hz, 25 Hz, 30 Hz • 1080p - 50 Hz, 60 Hz Computer formats Resolution — Refresh rate • 640 x 480p — 60 Hz (VGA/HDMI) • 600 x 8[...]

7.4   Multimedia 1/2 Connections • USB • Ethernet UTP5 • Wi-Fi 802.11g (built-in) Supported USB / memory device formats • FAT 16, FAT 32, NTFS Playback formats • MP3 • Still pictures : JPEG • MPEG 1, MPEG 2, MPEG 4 • MPEG program stream PAL • AVI • H.264 (MPEG-4 AVC) • WMA v2 up to v9.2 • WMV9 ... Downloaded From TV[...]

7.4   Multimedia 2/2 Supported media server software • Windows Media Player 11 (for Microsoft Windows XP or Vista) • Google (for XP) • Twonky Media — PacketVideo 4.4.9 (for PC and Intel MacOX) • Sony Vaio Media Server (for Microsoft Windows XP or Vista) • TVersity v.0.9.10.3 (for Microsoft Windows XP) • Nero 8 — Nero MediaH[...]

7.5Connectivity Rear • EXT1 (scart): Audio L/R, CVBS in, RGB • EXT2 (scart): Audio L/R, CVBS in, RGB • EXT3:Y Pb Pr, Audio L/R • VGA, Audio L/R • HDMI 1 in (HDMI 1.3a for all HDMI connections) • HDMI 2 in • HDMI 3 in • HDMI 4 in • Audio In L/R (DVI to HDMI) • Audio Out L/R — display synchronised • Digital Audio out [...]

7.6   Dimensions and weights 1/2 32PFL9604 Width 779 mm Height 475 mm Depth 89 mm Weight ±19 kg … with TV stand Height 539 mm Depth 220 mm Weight ±20 kg 37PFL9604 Width 903 mm Height 577 mm Depth 89 mm Weight ±26 kg … with TV stand Height 640 mm Depth 240 mm Weight ±29kg 40PFL9704 Width 987 mm Height 619 mm Dept 89 mm Weight ±28 k[...]

7.6   Dimensions and weights 2/2 46PFL9704 Width 1123 mm Height 701 mm Depth 89 mm Weight ±36 kg … with TV stand Height 764 mm Depth 280 mm Weight ±41 kg UMv 3104 327 0008.9 - 091001 52PFL9704 Width 1300 mm Height 803 mm Depth 128 mm Weight ±46 kg … with TV stand Height 875 mm Depth 320 mm Weight ±49 kg Downloaded From TV-Manual.co[...]

Risk of electric shock or re! • Never expose the TV or remote control to rain, water or excessive heat. • Never place liquid containers, such as vases, near the TV. If liquids are spilt on or into the TV, disconnect the TV from the power outlet immediately. Contact Philips Consumer Care to have the TV checked before use. • Never place the [...]

to scientic evidence available today. Philips plays an active role in the development of international EMF and safety standards, enabling Philips to anticipate further developments in standardisation for early integration in its products. Mains fuse (UK only) This TV is tted with an approved moulded plug. Should it become necessary to replace[...]

Information about how to re-tune your TV during the digital TV switchover. Television in the UK is going digital, bringing us all more choice and new services. Starting in late 2007 and ending in 2012, television services in the UK will go completely digital, TV region by TV region. Please see the next page to find out when your area switches to di[...]

Downloaded From TV-Manual.com Manuals[...]

DVB-T DVB-C CVBS Flash LED DIMMING FPGA Dimming USB 2.0 WiFi HDMI MUX Diagramma elettr onico / Elec tr onic diagram Downloaded From TV-Manual.com Manuals[...]

Non-contractual images. / Images non c ontractuelles. / Außervertragliche Bilder . All registered and unr egistered trademarks ar e property of their respective owners. Specifications are subject to change without no tice T rademarks are the property of Koninklijke Philips Electr onics N.V . or their respective owners 2009 © K oninklijke Philips[...]