Philips ADM0101 manual

Philips Communication, Security & Imaging Installation Instructions Eng[...]

2 IMPOR T ANT SAFEGU ARDS 1. Read Instructions - All safety and operating instructions should be read before the unit is operated. 2. Retain Instructions - The safety and operating instructions should be retained for future reference. 3. Heed Warnings - All warnings on the unit and in the operating instructions should be adhered to. 4. Follow Instr[...]

3 SAFETY PRECAUTIONS The lightning flash with an arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral tria[...]

4 SICHERHEITSHINWEISE Das Blitzsymbol im gleichseitigen Dreieck soll den Benutzer auf nicht isolierte “gefährliche Spannung” im Produkt hinweisen, die ausreichend stark sein kann, um die Gefahr von elektrischen Schlägen für Menschen darzustellen. Das Ausrufungszeichen im gleichseitigen Dreieck soll den Benutzer auf wichtige Bedienungs- und W[...]

5 VEILIGHEIDSMAA TREGELEN Het symbool ‘Bliksemflits met pijlkop’ in een gelijkzijdige driehoek wijst de gebruiker op de aanwezigheid in de kast van het apparaat van niet- geïsoleerde spanningen die voldoende sterk zijn om het gevaar van elektrische schokken op te leveren. Het uitroepteken in een gelijkzijdige driehoek maakt de gebruiker attent[...]

6 O símbolo do raio com a cabeça de uma seta dentro de um triângulo equilátero serve para alertar o utilizar para a presença de "corrente eléctrica perigosa" não isolada no interior da caixa do produto que pode ser suficiente para dar origem a choques eléctricos. O ponto de exclamação dentro de um triângulo equilátero serve pa[...]

7 TABLE OF CONTENTS 1P R ODUCT DESCRIPTION ..............................................................................................................................8 1.1 M odels ................................................................................................................................................................8 1.2 F[...]

8 1P R ODUCT DESCRIPTION ADIM ™ is a powerful security and surveillance solution that combines the power and features of the Philips Allegiant matrix switcher with the speed and quality of digital video recording. This tightly integrated solution uses the IntuiKey keyboard to control all cameras, monitors and digital video recorders. With the pus[...]

9 Typical System: IMPORTANT NOTES: • Disk Arrays are optional. (See specific DVR for Disk Array options.) • Additional Serial Hubs may be used for remote keyboards. • The ADIM system can handle a maximum of 6 keyboards; additional Keyboards may be connected to the Allegiant for live monitoring and camera control. • ADIM can only be used wit[...]

10 4 ADIM CONNECTIONS AND CONFIGURA TION NOTE: The installer should be familiar with the Allegiant CCTV control system and Windows-based software, and have a general knowledge of networking. 4.1 DVR Configuration (See DVR manual) Configure each DVR with a unique IP address • Ensure valid IP addresses are configured • Set the DVRs recording para[...]

11 Figure 4.2 Shows the relationship of the Backup and Review DVRs and Allegiant outputs to the DVR Configuration page of the ADIM. 4.6 Network Connections • Interconnect the Serial Hub(s). ADIM PC, DVRs and network switches. NOTE : Connect the ADIM PC to the Network using the port labeled LAN – Connect to Primary IP address. 4.7 ADIM PC Connec[...]

12 5 ADIM CONFIGURA TION The ADIM software is pre-loaded. No software installation is required. Open the ADIM Application by double clicking the ADIM icon on your desktop. 5.1 Logging ON and User Levels • Log in with a user name and password. • If configuring the system, logon as a user with Installer or Administrator privileges. This grants ac[...]

13 4. If it is a new document, or if the Allegiant system is not on- line, select < Allegiant > << Display Allegiant Document >>: Allegiant Document: 5. Using the instructions in the Master Control Software For Windows , configure the communication parameters << Transfer >> <<< Communication Setup >>>[...]

Items from DVR Configuration page 14 6.2 Other Configuration 6.2.1 Allegiant Status Message Monitors The < Allegiant Status Message Monitors > area is used to specify the Allegiant monitors that will display ADIM warning and error messages. Enter the monitor number(s) separated by commas (monitor ranges are specified with dashes). The monitor[...]

15 6.3 Status and Monitoring Page Table Element Explained Field Values Hi-Q number Fixed field depending on where the Hi-Q is entered into the table 1 - 800 Hi-Q Type Determines configuration of the Hi-Q in the system Primary, Backup, Review Monitor (See Appendix E for more details) Hi-Q Status Indicates operational status of a Hi-Q: On-Line and op[...]

16 Figure 6.3a Figure 6.3b NOTES: • New Log files are created daily upon the occurrence of the first event after 12:00am. Otherwise, new entries are appended to the existing log file upon starting the application. • Log files are easily manipulated into MS Excel or MS Access files for reporting. Use the TAB-delimited option to import into other[...]

17 7 ADIM KEYBO ARD OPERA TION 7.1 Product Menu To ensure that the IntuiKey Keyboard is properly connected to the ADIM system, press the IntuiKey’s Product key. The ADIM On-Line softkey option (see Figure 7.1 ) will only be displayed if the IntuiKey Keyboard is properly connected and configured, and the ADIM application is running. Press the ADIM[...]

18 8T R OUBLESHOO TING Problem Explanation / Resolution Keyboards are not communicating with the ADIM Software • Ensure that a null modem serial cable is connected between the IntuiKey keyboards and the serial hub. • Ensure that the appropriate communications port is properly configured for the serial hub. • Ensure that the serial hub is conn[...]

19 APPENDIX A – EVENT LOGS Event Monitor Message Likely Source of Error Info Log File Component Type Component ID Entry Type Log Message Primary or Review Hi-Q Failure DVR Error! ADIM Software Primary or Review Hi-Q DVR #nnnn, IP Address: XXX.XXX.XXX.XXX Error DVR Failure Primary or Review Hi-Q Disk Array Failure DVR Error! Hi-Q Primary or Review[...]

20 Event Monitor Message Likely Source of Error Info Log File Component Type Component ID Entry Type Log Message Allegiant On-Line ADIM Software Allegiant Allegiant Info Allegiant went On-Line Allegiant Off-Line ADIM Software Allegiant Allegiant Info Allegiant went Off-Line Hi-Q Low Power Supply Voltage DVR Voltage Hi-Q Hi-Q DVR #nnnn, IP Address: [...]

21 Event Monitor Message Likely Source of Error Info Log File Component Type Component ID Entry Type Log Message Recording Status Change 2 Hi-Q Camera Logical Camera # Info Recording status changed to Continuous for indicated Logical Camera on DVR #nnnn, IP Address: XXX.XXX.XXX.XXX, DVR Camera X Recording Status Change 3 Hi-Q Camera Logical Camera [...]

22 APPENDIX B – TECHNICAL SPECS ADIM Components (included): Industrial PC: Rack-mount industrial-grade Pentium ® PC, 120 MB RAM (minimum), 8 GB hard drive (minimum), CD-ROM drive, floppy drive, keyboard, mouse, 10/100BaseT- compatible (RJ-45), keyboard/mouse rack-mount shelf, and Windows NT ® 120/220 VAC, 50/60 Hz. Monitor: 14-inch SVGA (includ[...]

23 APPENDIX C – RECOMMENDED NETW ORK SWITCHES Approved and tested network switches for use with ADIM. • 3Com SuperStack 4300 model APPENDIX D – LIST OF COMP A TIBLE D VRS • Hi-Q Series (DVRRT4, DVRRT4EP) APPENDIX E – PRIMAR Y , BACKUP , AND REVIEW D VRS Primary: DVRs on the input of the Allegiant Backup: DVRs used on the output of the All[...]

3935 890 42712 02-39 © 2002 by Philips Electronics N.V. © 2002 by Philips Communication, Security & Imaging, Inc. All Rights Reserved. Philips ® is a registered trademark of Philips Electronics N. A. Corp. Updated September 25, 2002. Data subject to change without notice. Refer to www.philipscsi.com for latest information. Windows ® is a re[...]