Philips BDH4251V/00 manual

TYPE Nr . BDH4251V/00 User Manual EN[...]

User Manual BDH4251V/00 Always obey all safety messages. • All the safety and operating instructions should be read before the product is operated. If anything strange happens, unplug this product from the wall outlet. • Do not disassemble or replace any parts of the Monitor . Refer to a qualified service personnel for repair . Safety Precauti[...]

3 During Use Do not open the cover (or back) because high voltage is present within the Monitor enclosure. It may cause electric shock. Never push any kind of objects into this product through openings at the back of Monitor. It may cause fire or electric shock. The apparatus shall not be exposed to dripping or splashing and that no objects fille[...]

User Manual BDH4251V/00 Always obey all safety messages. • All the safety and operating instructions should be read before the product is operated. Safety Precautions 4 Power Installation CAUTION Y ou can be injured, or this product or any other of your property can be damaged if you don’t follow instructions. When moving your Monitor, remove t[...]

5 5 During Use Do not wipe the Monitor using a cloth damped with chemicals (benzene, thinners, etc.). The Monitor appearance may be marred. (Unplug the power plug and wipe with soft cloth.) Do not place any object or cover on the Monitor. In an event of improper ventilation, the Monitor will be overheated causing fire. Do not place heavy objects o[...]

User Manual BDH4251V/00 6 Checking Accessories Stand Unit Remote Control 1 UNIT Note Check to be sure that the following items are packed with your Plasma panel. Supplied Accessories Batteries 1 UNIT P .MODE PICTURE FMT AV S.MODE S.EFFECT PIXEL SHIFT PIP POSITION COLOR TEMP PIP SOURCE SWA P RECALL VOL VOL MENU TIMER STILL R-48F01 MUTE AC Power Cabl[...]

User Manual BDH4251V/00 7 Assembling the plasma display stand . Open and take out the stand from the box and remove wrapper . . Slide the stand under the plasma display like the picture below . D I G I T A L A U D I O O P T I C A L O U T P U T I NP U T P C A U D I O P C ? A U DI O H D M I C O M P O N E N T I N P U T A V1 A V 2 . Use the enclosed 4 [...]

8 2 • Safety Precautions 6 • Checking Accessories 7 • Assembling the plasma display stand 10 • Panel Controls 11 • Remote Control PREP ARA TION CONNECTION 13 • W atching Digital Broadcasts 15 • W atching Cable Broadcasts 17 • W atching Satellite Broadcasts 19 • W atching a DVD Image 21 • W atching a VCR Image 23 • W atching a [...]

User Manual BDH4251V/00 9 Panel Controls Front Panel, Rear Panel * Items having the same name on the plasma display and the remote control would function in exactly the same way . Front Power control sensor Power Stand by Red : Stand by Green : ON EN[...]

User Manual BDH4251V/00 DIGIT AL AUDIO OPTICAL INPUT PC AUDIO SERVICE PC PC OUT AUDIO HDMI COMPONENT INPUT AV 1 AV 2 AUDIO VIDEO 10 Rear DIGITAL AUDIO OPTICAL OUTPUT INPUT PC AUDIO PC ? AUDIO HDMI COMPONENT INPUT AV1 AV2 MENU MOVE PC INPUT (15 pin D-sub) HDMI INPUT COMPONENT A/V jacks SCART, A/V INPUT/OUTPUT. External Speaker Power PC OUTPUT (15 pi[...]

User Manual BDH4251V/00 P .MODE PICTURE FMT A V S.MODE S.EFFECT PIXEL SHIFT PIP POSITION COLOR TEMP PIP SOURCE S WA P RECALL VOL VOL MENU TIMER STILL R-48F01 MUTE 11 Remote Control Note • Use two “ AAA ” batteries. • Be sure to use replacement batteries of the same type as the original ones. • The life of a battery depends on how much it [...]

12 Installing the batteries in your remote control When using remote control • Be sure not to allow the remote control to drop or to become wet. • Keep it away from hot or moist locations. 1 Open the battery compartment on the back of the remote control. 2 Install two AAA-size batteries (not included) as shown. Make sure the “ + ” and “ -[...]

User Manual BDH4251V/00 13 W atching Digital Broadcasts • T o watch digital broadcasts: - Purchase a separate Digital Broadcasting Receiver(SET -TOP BOX) - Connect the PDP to a Digital Broadcasting Receiver as shown right. P .MODE PICTURE FMT A V S.MODE S.EFFECT PIXEL SHIFT PIP POSITION COLOR TEMP PIP SOURCE S WA P RECALL VOL VOL MENU TIMER STILL[...]

14 Input Select Select the Desired Channel and Function • Select the desired channel and function by using the remote control of the Digital Broadcasting Receiver . 3 4 NOTES: 1) Possible digital broadcasting signals: 1080i, 720p, 576p, 576i, 480p, 480i. 2) What is a component? : Signals with which luminance and chrominance are separated, produci[...]

User Manual BDH4251V/00 15 W atching Cable Broadcasts • T o watch cable broadcasts, subscribe to your local cable TV broadcasting, and then connect a cable Broadcasting Receiver to the PDP as shown right. P .MODE PICTURE FMT A V S.MODE S.EFFECT PIXEL SHIFT PIP POSITION COLOR TEMP PIP SOURCE S WA P RECALL VOL VOL MENU TIMER STILL R-48F01 MUTE Pres[...]

16 Input Select AV • Select [AV 1(Scart), AV 2(Scart) or AV3(S-Video)] by pressing the [AV] button of the remote control or the in keypad of the PDP unit. • When you press the “ AV ” button, you will see the OSD as shown. you can move using “ “ and select desire input mode with “ “ button. Select the Desired Program and Function •[...]

User Manual BDH4251V/00 17 W atching Satellite Broadcasts • T o watch satellite broadcasting, subscribe to Digital Satellite Broadcasting, then connect the satellite Broadcasting Receiver to the PDP as shown right. P .MODE PICTURE FMT A V S.MODE S.EFFECT PIXEL SHIFT PIP POSITION COLOR TEMP PIP SOURCE S WA P RECALL VOL VOL MENU TIMER STILL R-48F01[...]

18 Input Select AV Select the Desired Program and Function • Select the desired program and function by using the Remote Control of the Satellite Broadcasting Receiver . 3 4 Move Select MENU Exit Picture Screen Sound Feature Input AV 1 AV 2 AV 3 Component PC HDMI • Select [A V 1(Scart), A V 2(Scart) or A V3(S- Video)] by pressing the [ AV ] but[...]

User Manual BDH4251V/00 19 DIGITAL AUDIO OPTICAL OUTPUT INPUT PC AUDIO PC ? AUDIO HDMI COMPONENT INPUT AV1 AV2 MENU MOVE W atching a DVD Image • Component Input is set to 480i/576i and 480p/576p mode. • Connect the cable from the DVD Video output (Y , Pb/Cb, Pr/Cr) to the Component Input at the back of PDP , and connect the cable from DVD audio[...]

NOTES: 1) Y/Cb/Cr , which stands for component video DVD player ’ s output can also be written as Y/B-Y/R-Y , Y/Pb/Pr depending on the kinds of DVD model. 2) The way of connecting the DVD to the PDP is as follows: Y <---> Y C b <---> Pb, B-Y , Cr <---> P r , R - Y 3) The DVD output can be Video, S-V ideo or Component V ideo depe[...]

User Manual BDH4251V/00 21 W atching a VCR Image • V ideo can use either the video terminal or the S-video terminal. P .MODE PICTURE FMT A V S.MODE S.EFFECT PIXEL SHIFT PIP POSITION COLOR TEMP PIP SOURCE S WA P RECALL VOL VOL MENU TIMER STILL R-48F01 MUTE Press the Power Buttons • Turn the PDP and the VCR ON. 2 Connect a VCR to the PDP . • Pr[...]

NOTES: 1) When connecting a VCR, the S-Video terminal provides a better image than the Video terminal. 2) When connecting to the Video terminal, connect 3 colour A V cables (video, left audio, right audio) to the PDP; for the S- Video terminal, connect the Audio terminal (Left, Right) in the same way , and connect the S-Video cable (sold separately[...]

User Manual BDH4251V/00 W atching a Camcorder/Game Console Image • Enjoy images recorded by camcorder or the game console after connecting to the PDP . 23 P .MODE PICTURE FMT A V S.MODE S.EFFECT PIXEL SHIFT PIP POSITION COLOR TEMP PIP SOURCE S WA P RECALL VOL VOL MENU TIMER STILL R-48F01 MUTE Press the Power Buttons • T urn the PDP and the Camc[...]

NOTES: 1) When connecting the device, the S-Video terminal provides a better image than the Video terminal. 2) When connecting to the Video terminal, connect 3 colour A V cables (video, left audio, right audio) to the PDP; for the S- Video terminal, connect the Audio terminal (Left, Right) in the same way , and connect the S-Video cable(sold separa[...]

User Manual BDH4251V/00 • Go to SETUP-CONTROL P ANEL-DISPLA Y PROPERTIES in Window Screen of the PC. • Choose the SETTINGS tab in the DISPLA Y menu. • In the SETTINGS menu, select 640 x 480, 800 x 600, 1024 x 768 or 1280 x 1024 Connecting PC • This product supports resolutions of VGA, SVGA, XGA, WXGA, SXGA. • Before connecting a PC to the[...]

NOTES: 1) The resolution of the PC monitor is the best at 800 X 600 (SVGA) for SD panel and at 1024 X 768 (XGA) for HD panel. 2) If there is a [V ertical Frequency]setting menu in the [Display] menu of the PC, adjust the frequency to 60Hz. 3) If the PC resolution is too high, it may be hard to read letters. Select a suitable resolution. 4) If the p[...]

User Manual BDH4251V/00 27 Connecting HDMI P .MODE PICTURE FMT A V S.MODE S.EFFECT PIXEL SHIFT PIP POSITION COLOR TEMP PIP SOURCE S WA P RECALL VOL VOL MENU TIMER STILL R-48F01 MUTE Connect the HDMI to the PDP . • Prepare the HDMI cable. • Connect the HDMI(Output) to the PDP(Input) as shown below . 1 HDMI DIGITAL AUDIO OPTICAL OUTPUT INPUT PC A[...]

28 Input Select AV • Select [HDMI] by pressing the A V button of the remote control or the button on the PDP unit. • When you press the “ AV ” button, you will see the OSD as shown. you can move using “ “ and select desire input mode with “ “ button. 3 • T urn on the PDP and DVD or Game console. NOTES: HDMI input port receives onl[...]

29 29 OPTICAL INPUT PC AUDIO SERVICE PC PC OUT AUDIO HDMI COMPONENT INPUT AV 1 AV 2 Surround L Surround R R L Center W oofer Dolby Digital AMP I N P U T Optical output AUDIO VIDEO Connect with the Dolby Digital AMP . If you connect the optical output to a Dolby digital AMP , you can listen to better sound. EN User Manual BDH4251V/00[...]

31.469 37.861 37.500 31.469 35.156 37.879 48.363 63.981 30 30 59.940 72.809 75.000 70.087 56.250 60.317 60.004 60.020 DOS VESA VESA IBM VESA VESA VESA VESA O O O O O O O O O O O O O O O O • Depending on graphic card, problems like no signal detected or line noises can happen. If these problems happen, contact the graphic card company for help. 64[...]

Selecting Picture Mode Selecting Picture Mode P .MODE • Press the [P .MODE] on the remote control. • While pressing the [P .MODE] for the fi rst time, the current picture mode will be displayed. Each Press of the Button Will Select One of Four Picture Modes. • Each time you press the button, a different picture mode appears. The sequence use[...]

32 Customizing Picture • Y ou can adjust the colour tone and brightness to your preference. P .MODE PICTURE FMT A V S.MODE S.EFFECT PIXEL SHIFT PIP POSITION COLOR TEMP PIP SOURCE S WA P RECALL VOL VOL MENU TIMER STILL R-48F01 MUTE Press the Button. • After selecting [Picture] by the “” buttons, press the “ ” button. Then the sub menu of[...]

33 Select User Mode Adjustments Picture Condition Adjustments • Press the “ ” buttons to adjust the picture of your preference. • N.R. functions the noise reduction. 4 5 Move Select MENU Exit On Normal 50 50 8 50 Picture Feature Input Sound Screen Mode Brightness Contrast Sharpness Colour Colour T emp N. R. User Move Select MENU Exit On Nor[...]

34 Press the “COLOR TEMP” button on the remote control. 6 Move Select MENU Exit On 50 8 50 Picture Feature Input Sound Screen Mode Brightness Contrast Sharpness Colour Colour T emp N. R. User 50 Normal COLOR TEMP Normal W arm Cool • Pressing the “ COLOR TEMP ” button first time will display the current setting for COLOR TEMP . • Each ti[...]

35 P .MODE PICTURE FMT A V S.MODE S.EFFECT PIXEL SHIFT PIP POSITION COLOR TEMP PIP SOURCE S WA P RECALL VOL VOL MENU TIMER STILL R-48F01 MUTE Adjusting Screen Adjusting with Picture FMT button • Y ou can adjust screen size or aspect ratio as desired. Press the PICTURE FMT Button. • The current screen size will be displayed on the screen. • Ea[...]

36 P .MODE PICTURE FMT A V S.MODE S.EFFECT PIXEL SHIFT PIP POSITION COLOR TEMP PIP SOURCE S WA P RECALL VOL VOL MENU TIMER STILL R-48F01 MUTE Adjusting Screen in the MENU Adjusting Screen • Y ou can adjust the screen in the menu. Press the MENU Button. • The MENU screen as shown below will appear . Press the “ ” Button. • Press the “”[...]

P .MODE PICTURE FMT A V S.MODE S.EFFECT PIXEL SHIFT PIP POSITION COLOR TEMP PIP SOURCE S WA P RECALL VOL VOL MENU TIMER STILL R-48F01 MUTE 37 Adjusting Screen in the MENU Press the V olume “ ” Buttons. • Press the V olume “ ” buttons to enter the sub menu “ Screen ” . • While you are in ‘ Screen ’ menu, press the “ ” or “ [...]

38 Press the “STILL” Button. • If you wish to freeze a picture, press the “ STILL ” button. Y ou can still hear the sound. • Press “ STILL ” button again to cancel the “ STILL ” function. 1 STILL W atching a Still Image • Y ou can view still images with this function. However , displaying the same images such as still images f[...]

39 W atching T wo Pictures Simultaneously Engaging PIP mode PIP POSITION C PIP SOURCE S WA P • Press the ‘ PIP ’ button once on the remote control to engage the Picture-in-Picture mode. • By pressing the button repeatedly , it will show the following cycle. • If switched to P-by-P (Picture-by-Picture) mode, the screen will be split in hal[...]

A vailable PIP Input Combinations • Main-picture and sub-picture input combinations are listed below for reference. 6 Select the Input Source • V arious signal sources can be displayed within the sub-picture under PIP mode. • Once the PIP mode is on, you may change the input source of the sub-picture by pressing the 'SOURCE' button.[...]

Selecting Sound Mode 41 P .MODE PICTURE FMT A V S.MODE S.EFFECT PIXEL SHIFT PIP POSITION COLOR TEMP PIP SOURCE S WA P RECALL VOL VOL MENU TIMER STILL R-48F01 MUTE Selecting Sound Mode • Enjoy various sound modes by selecting your favourite Sound Mode depending on the kinds of moving pictures. Select “SOUND MODE”. S.MODE • Press the “ S.MO[...]

Customising Sound Mode • This feature allows the user to adjust for their preference. 42 Press the “ ” Button. • Select [Sound] by the “” buttons, then press the “” button to display the following. Select SOUND BALANCE. • Select “ Sound-Balance ” by the “ ” buttons, then adjust it. 3 Press the MENU Button. • The MENU scr[...]

43 Select the Effect Mode. • Select [Effect] by pressing the “” buttons, then select the desire sound effect by pressing the “ ” button. • [Effect]: Used to emphasize stereo ef fect. • BBE is the sound enhancement clarifying the sound and outputs fi nest quality . And M.V oice is the function that you can hear clearer voice. • Effe[...]

44 P .MODE PICTURE FMT A V S.MODE S.EFFECT PIXEL SHIFT PIP POSITION COLOR TEMP PIP SOURCE S WA P RECALL VOL VOL MENU TIMER STILL R-48F01 MUTE Select the Sound Mode. 5 Move Adjust MENU Exit Off Feature Input Picture Screen Sound Balance Effect AV C Mode Equalizer 0 Off Normal • Select the Sound Mode by pressing the “” buttons, then adjust it b[...]

Selecting INPUT SIGNAL 45 P .MODE PICTURE FMT A V S.MODE S.EFFECT PIXEL SHIFT PIP POSITION COLOR TEMP PIP SOURCE S WA P RECALL VOL VOL MENU TIMER STILL R-48F01 MUTE NOTES: 1) If an external device is not connected or INPUT signal is not applied a W arning Message ( “ No Signal ” ) will be displayed. 2) In this case, check if external device is [...]

46 46 Checking the Current Input Signal • Used to check the INPUT signal mode, current time, resolution, etc. Press the RECALL Button. RECALL • Press the [RECALL] button on the Remote Control. 1 1. If you watch Component, PC, or HDMI: Displays which input terminal is used, and indicates the input signal mode. Indicates the mode and current time[...]

P .MODE PICTURE FMT A V S.MODE S.EFFECT PIXEL SHIFT PIP POSITION COLOR TEMP PIP SOURCE S WA P RECALL VOL VOL MENU TIMER STILL R-48F01 MUTE 47 MENU Background, Language and Child Lock Setting Press the MENU Button. • The MENU screen will be displayed as below . Press the “ ” Button. • Select [Feature] by the “” button. Select the menu Ba[...]

48 Select LANGUAGE by using the “” Button. • Select [Language] by using the “” button. • Every press of the “ ” button while you are in the [Language] mode would cycle through the dif ferent languages. Child Lock Setting • Select [Child Lock] by the “” buttons. • Whenever “” button is pressed, the lock mode would cycle O[...]

49 P .MODE PICTURE FMT A V S.MODE S.EFFECT PIXEL SHIFT PIP POSITION COLOR TEMP PIP SOURCE S WA P RECALL VOL VOL MENU TIMER STILL R-48F01 MUTE MGDI Plus (Meta Genuine Digital Image) Press the MENU Button. • The MENU screen will be displayed as below . Select Feature • Select [Feature] by the “” button. 1 2 Move Select MENU Exit Mode Brightne[...]

50 P .MODE PICTURE FMT A V S.MODE S.EFFECT PIXEL SHIFT PIP POSITION COLOR TEMP PIP SOURCE S WA P RECALL VOL VOL MENU TIMER STILL R-48F01 MUTE MGDI Plus Setting • Enter the sub Menu by using the “ ” button. • Select the [MGDI Plus] by pressing the “” button. • You can select [MGDI Plus] On or Off mode by using the “ ” button. 3 Mov[...]

51 P .MODE PICTURE FMT A V S.MODE S.EFFECT PIXEL SHIFT PIP POSITION COLOR TEMP PIP SOURCE S WA P RECALL VOL VOL MENU TIMER STILL R-48F01 MUTE Auto Power Setting Auto Power Setting • Select the [Auto Power] by pressing the “” button from [Feature]. • You can select [Auto Power] ON and OFF mode by using the “ ” button. 1 Move Adjust MENU [...]

52 P .MODE PICTURE FMT A V S.MODE S.EFFECT PIXEL SHIFT PIP POSITION COLOR TEMP PIP SOURCE S WA P RECALL VOL VOL MENU TIMER STILL R-48F01 MUTE Press the MENU Button. • The MENU screen will be displayed as below . Select Feature VOL VOL MENU • Select [Feature] by the “” button. Select T ime Setting • Enter the sub menu by using the “ ” [...]

53 P .MODE PICTURE FMT A V S.MODE S.EFFECT PIXEL SHIFT PIP POSITION COLOR TEMP PIP SOURCE S WA P RECALL VOL VOL MENU TIMER STILL R-48F01 MUTE T ime Setting Time Setting • The “ Current time ” must be set up ahead of setting up other time memories. Off-T ime setting • Select Functions by pressing the “” button. First, set [Clock]- curren[...]

54 P .MODE PICTURE FMT A V S.MODE S.EFFECT PIXEL SHIFT PIP POSITION COLOR TEMP PIP SOURCE S WA P RECALL VOL VOL MENU TIMER STILL R-48F01 MUTE Press the MENU Button. • The MENU screen will be displayed as below . Press the “” Button. • Select [Feature] by the “” button. Select ISM. • Enter the sub menu by using the “ ” button. • [...]

55 P .MODE PICTURE FMT A V S.MODE S.EFFECT PIXEL SHIFT PIP POSITION COLOR TEMP PIP SOURCE S WA P RECALL VOL VOL MENU TIMER STILL R-48F01 MUTE Image Sticking Minimisation(ISM) Select Functions. • Every press of the “ ” button after select function by the “” button would switch between ON/OFF . 4 Move Adjust MENU Exit Input Picture Screen S[...]

56 Back to Initialization • Y ou can restore the values of the adjustment setting made in the MENU back to factory settings. Press the MENU Button. • The MENU screen will be displayed as below . 1 Move Select MENU Exit Mode Brightness Contrast Sharpness Colour Colour T emp N. R. Dynamic On Normal 40 80 8 60 Picture Feature Input Sound Screen Mo[...]

57 Reset factory setting When [INITIALIZA TION] is completed: 1) When [INITIALIZATION] is completed, those values that have been set in the User Mode of [PICTURE MODE] and [SOUND MODE] will be returned to the factory preset values. 2) Once initialized, you can not undo. 3) The items in the [SCREEN] Menu are also initialized. 4) Language, program, t[...]

58 Setting Sleep T imer P .MODE PICTURE FMT A V S.MODE S.EFFECT PIXEL SHIFT PIP POSITION COLOR TEMP PIP SOURCE S WA P RECALL VOL VOL MENU TIMER STILL R-48F01 MUTE Setting Sleep Timer • Sleep T imer turns the PDP off after a preset time. Press the “TIMER” Button. TIMER • Press the “ TIMER ” button on the Remote Control. • Pressing the [...]

Diagonal Size 106cm (42 ” ) Screen Aspect Ratio 16 : 9 System P AL B/G, ,D/K, I/I, SECAM B/G, D/K, L/L ’ Display Resolution HD Panel : 1024(H) X 768(V) dots Pixel Pitch HD Panel : 0.90(H) X 0.676(V) mm Dimension 1039(W) X 628(H) X 88(D) mm (without Stand) 1039(W) X 716(H) X 280(D) mm (with Stand) Weight(without stand) 30.4Kg Power Requirement 1[...]