Poulan PD22PH48STD manual

02153 O WNER'S MANU AL MODEL: PD22PH48STD LA WN TRA CT OR Alwa ys W ear Eye Pr otection During Operation W ARNING: Read this Owner's Manual and fol low all W arnings and Safety In struc tions. Failure to do so can result in serious injury . IMPOR T ANT MANU AL Do Not Thr ow A wa y 192318 4.21.04 MH Printed in U.S .A.[...]

2 I. GENERAL OPERA TION • Read, understand, and follow all instr uctions in the manual and on the machine bef ore star ting. • Only allow responsib le adults, who are familiar with the in struc tions, to operate the machine . • Clear the area of objects such as rocks , to ys, wire , etc., which could be pick ed up and thrown by the b lade. ?[...]

3 W ARNING: In order to pre vent ac ci - den tal starting when setting up, trans- port ing, ad just ing or making repairs, al ways dis con nect spark plug wire and place wire where it can not contact spark plug. W ARNING: Do not coast down a hill in neutral, you may lose contr ol of the tractor . W ARNING: T ow only the attac hments that are rec om[...]

4 Gasoline Capacity 4.0 Gallons and type: Unleaded Regular Oil T ype (API-SG-SL): SAE 30 (abov e 32°F) SAE 5W -30 (below 32°F) Oil Capacity: W/ Filter : 4.0 Pints W/O Filter : 3.75 Pints Spark Plug: Champion QC12YC (Gap: .040") Ground Speed (MPH): F orward: 0 – 5.5 Re verse: 0 – 2.4 Tire Pressure: F ront: 14 PSI Rear : 10 PSI Charging Sy[...]

5 UNASSEMBLED P ARTS Mower Gauge Wheels (4) Washers 3/8 x 3/4 x 14 Ga. (4) Wheels (4) Adjusting Bars (4) Retainer Springs (double loop) (4) Clevis Pins (4) Locknuts 3/8-16 (4) Shoulder Bolts Nose Roller (2) Hex Bolts 5/16-18 x 1 (2) Locknuts 5/16-18 Steering Wheel (1) Knob (1) Washer 17/32 x 1-3/16 x 12 Gauge Seat Steering Wheel Inser t Steering Wh[...]

6 HO W T O SET UP Y OUR TRA CT OR CHECK B A TTER Y (See Fig. 2) • Lift hood to raised position. • If this batter y is put into service after month and year indicated on label (label located between terminals) charge batter y f or minimum of one hour at 6-10 amps. (See "BA TTER Y" in MAINTENANCE section of this man u al f or charg ing [...]

7 ASSEMBL Y FIG. 3 2466 02464 SEA T P AN SHOULDER BOL T ADJUSTMENT KNOB FLA T W ASHER SEA T INST ALL SEA T (See Fig. 3) Adjust seat bef ore tightening adjustment knob . • Remov e adjustment knob and fl at washer securing seat to cardboard packing and set aside f or assembly of seat to tractor . • Pivot seat upw ard and remov e from the cardboa[...]

8 02510 INST ALL MO WER AND DRIVE BEL T (See Figs. 6 and 7) Be sure tractor is on le vel surf ace and mower suspension arms are raised with attachment lift control. Engage par k- ing brak e. • Cut and remove ties securing anti-sw a y bar and belts. Swing anti-s wa y bar to left side of mower dec k. • Slide mower under tr actor with defl ector [...]

9 CHECK TIRE PRESSURE The tires on your tr actor were ov er infl ated at the factory f or shipping pur poses . Correct tire pressure is impor tant f or best cutting perf or mance . • Reduce tire pressure to PSI shown in “PRODUCT SPEC I FI CA TIONS” section of this man ual. CHECK MO WER LEV EL NESS F or best cutting results, mo wer should be [...]

10 These symbols ma y appear on your tr actor or in literature supplied with the product. Lear n and understand their mean- ing. OPERA TION DANGER, KEEP HANDS AND FEET AWAY FREE WHEEL (Automatic Models only) OVER TEMP LIGHT KEEP AREA CLEAR SLOPE HAZARDS 15 15 (SEE SAFETY RULES SECTION) BATTERY REVERSE FORWARD FAST SLOW ENGINE ON ENGINE OFF OIL PRES[...]

11 ELAPSED TIME AMPS 60 0 60 HOURS 1/10 000 0 00 00 00 02527 OPERA TION KNO W Y OUR TRA CT OR READ THIS O WNER'S MANU AL AND SAFETY R ULES BEFORE OPERA TING Y OUR TRA CT OR Compare the illustrations with y our tractor to f amiliar iz e yourself with the locations of v ar ious controls and ad just ments. Sav e this manual f or future reference [...]

12 OPERA TION CA UTION: Alwa ys stop tractor com- plete ly , as described above, before lea v- ing the operator's position; to empty grass catcher , etc. The operation of any tractor can result in f oreign objects thrown into the ey es, which can result in severe e ye dam age . Alwa ys wear safety glass es or eye shields while operating y our [...]

13 OPERA TION T O OPERA TE MO WER (See Fig. 10) Y our tractor is equipped with an operator presence sensing s witch. Any attempt b y the operator to lea v e the seat with the engine running and the attachment clutch engaged will shut off the engine. Y ou must remain fully and centrally positioned in the seat to pre vent the engine from hesitating o[...]

14 OPERA TION T O ST ART ENGINE (See Fig. 7) When star ting the engine f or the fi rst time or if the engine has run out of fuel, it will take e xtra cranking time to mo ve fuel from the tank to the engine. • Be sure free wheel control is in the transmission en gaged position. • Sit on seat in operating position, depress brak e pedal and set p[...]

15 OPERA TION FIG. 12 00272 PURGE TRANSMISSION CA UTION: Never engage or disengage freewheel le ver while the engine is run- ning. T o ensure proper operation and perf or mance, it is rec om - mend ed that the transmission be purged bef ore operating tractor f or the fi rst time. This procedure will remov e any trapped air inside the transmission [...]

16 BEFORE EACH USE T R A C T 0 R Inspect Muffler/Spark Arrester Lubrication Chart Check Brake Operation Clean Air Filter Change Engine Oil (with oil filter) Replace Air Filter Paper Cartridge Replace Spark Plug Check Battery Level Check Tire Pressure Clean Battery and Terminals FILL IN DATES AS YOU COMPLETE REGULAR SERVICE MAINTENANCE SCHEDULE EVER[...]

17 MAINTENANCE TRA CT OR Alwa ys obser v e saf ety rules when performing any main- te nance. BRAKE OPERA TION If tractor requires more than six (6) f eet stopping distance at high speed in highest gear , then brake m ust be adjusted. (See “T O ADJUST BRAKE” in the Service and Ad just ments section of this manual). TIRES • Maintain proper air [...]

18 MAINTENANCE CLEAN AIR SCREEN Air screen must be k ept free of dir t and chaff to pre vent engine dam age from ov erheating. Clean with a wire brush or compressed air to re mov e dir t and stubborn dried gum fi bers. TRANSAXLE COOLING The transmission f an and cooling fi ns should be kept clean to assure proper cooling. Do not attempt to clean [...]

19 MAINTENANCE MUFFLER Inspect and replace corroded muffl er and spark arrester (if equipped) as it could create a fi re hazard and/or dam- age. SP ARK PLUGS Replace spark plugs at the beginning of each mowing season or after e very 100 hours of operation, whiche v er occurs fi rst. Spark plug type and gap setting are shown in “PROD UCT SPECIF[...]

20 02565 SER VICE AND ADJUSTMENTS FIG. 18 T O REMO VE MO WER (See Fig. 18) • Place attachment clutch in “DIS EN GA GED” position. • If equipped, turn height adjustment knob to low est set ting. • Lower mo wer to its lowest position. • Disengage belt tension rod from lock br ack et. CA UTION: Rod is spring loaded. Have a tight grip on ro[...]

21 SER VICE AND ADJUSTMENTS MANDREL FIG. 21 FIG. 22 FIG. 20 LIFT LINK ADJUSTMENT NUT 01553 SUSPENSION ARM 02517 BO TH FRONT LINKS MUST BE EQU AL IN LENGTH TRUN NION FRONT PLA TE AS SEM BL Y NUT “C” NUT “D” 02516 FRONT -TO-BA CK ADJUSTMENT (See Figs. 21 and 22) IMPORT ANT: DECK MUST BE LEVEL SIDE-T O-SIDE. IF THE FOLLO WING FRONT -T O-BA CK [...]

22 02515 02513 SER VICE AND ADJUSTMENTS L.H. MANDREL CENTER MANDREL IDLER PULLEY R.H. MAN DREL CO VER SPRING FIG. 24 SEC OND AR Y IDLER ARM SEC OND AR Y SPRING ARM T O REPLA CE MO WER DRIVE BEL T MO WER DRIVE BEL T REMO V AL (See Fig. 23) • P ark tractor on a le v el surface. En gage par king brak e. • Lower mo wer to its lowest position. • D[...]

23 02537 TRANSMISSION REMO V AL/RE PLA CE MENT Should your tr ansmission require remov al for service or replacement, it should be purged after reinstallation and bef ore operating the tractor . See “PURGE TRANS MIS SION” in the Operation section of this manual. SER VICE AND ADJUSTMENTS FIG. 25 WITH P ARKING BRAKE “ENGA GED” JAM NUT DO NO T[...]

24 SER VICE AND ADJUSTMENTS FIG. 29 0217 9 HEX BOL T KEPS NUT POSITIVE (RED) CABLE NEGA TIVE (BLA CK) CABLE TERMINAL GU ARD TERMINAL A CCESS DOOR REPLA CING B A TTER Y (See Fig. 29) CA UTION: Do not short batter y ter mi - nals by allo wing a wrench or an y other object to contact both terminals at the same time. Bef ore connecting batter y , remov[...]

25 SER VICE AND ADJUSTMENTS FIG. 30 T O REMO VE HOOD AND GRILL ASSEMBL Y (See Fig. 30) • Raise hood. • Unsnap headlight wire connector . • Stand in front of tractor . Grasp hood at sides, tilt to ward engine and lift off of tractor . • T o replace, re verse abo ve procedures . 02141 HOOD HEADLIGHT WIRE CONNECT OR T O REPLA CE HEADLIGHT BULB[...]

26 ST ORA GE Immediately prepare your tr actor f or storage at the end of the season or if the tractor will not be used f or 30 days or more. W ARNING: Never store the trac tor with gas o line in the tank inside a building where fumes may reac h an open fl ame or spark. Al low the engine to cool before storing in any en cl o sure. TRA CT OR Remov [...]

27 TR OUBLESHOO TING POINTS Will not start 1. Out of fuel. 1. Fill fuel tank. 2. Engine not “CHOKED” proper ly . 2. Se e “T O ST ART ENGINE” in Operation section. 3. Engine fl ooded. 3. Wait se veral minutes bef ore attempting to star t. 4. Bad spark plug. 4. Replace spark plug. 5. Dir ty air fi lter . 5. Clean/replace air fi lter . 6. D[...]

28 TR OUBLESHOO TING POINTS Engine continues to run 1. Faulty oper ator-safety presence control system. 1. Chec k wiring, switches and connections. If not when operator leaves seat corrected, contact an authorized service center/ with attachment clutc h department. engaged P oor cut - uneven 1. Worn, bent or loose blade . 1. Replace blade . Tighten[...]

46 LIMITED W ARRANTY The Manuf acturer warrants to the original consumer purchaser that this product as manufactured is free from def ects in materi- als and work man ship. For a period of two (2) y ears from date of purchase by the original consumer purchaser , we will repair or replace, at our option, without charge f or par ts or labor incurred [...]

47 15 DEGREES MAX. F O L D A L O N G D O T T E D L IN E T H IS IS A 15 D E G R E E S L O P E ONLY RIDE UP AND DOWN HILL, NOT ACROSS HILL SUGGESTED GUIDE FOR SIGHTING SLOPES FOR SAFE OPERATION WARNING: To avoid serious injury, operate your tractor up and down the face of slopes, never across the face. Do not mow slopes greater than 15 degrees. Make [...]

Y our POULAN PRO product has been e xpertly en gi neered and carefully manu fac tured to rigid quality stan dards. As with all mechanical pr oducts, some adjustments or par t replacement may be necessary during the life of y our unit. FOR SER VICE OR REPLA CEMENT P ARTS: 1. Consult y our dealer/place of purchase. 2. Consult the yellow pa ges of you[...]