ProForm 831.24624.0 manual

Model No. 831.24624.0 Serial No. CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference. Serial Number Decal • Assembly • Operation • Maintenance • Part List and Drawing Sears, Roebuck and Co., Hoffman Estates, IL 60179 TREADMILL EXERCISER User ’ s Manual[...]

T ABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ASSEMBLY . . . . . . .[...]

1. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. 2. Use the treadmill only as described. 3. Place the treadmill on a level surface, with at least eight feet of clearance behind it and two feet on each side. Do not place the treadmill on any surface that bloc[...]

4 22. Inspect and properly tighten all parts of the treadmill regularly. 2 3. Never insert any object into any opening. 2 4. DANGER: A lways unplug the power cord immediately after use, before cleaning the treadmill, and before performing the main- tenance and adjustment procedures de- scribed in this manual. Never remove the motor hood unless inst[...]

5 T hank you for selecting the new PROFORM ® 5 10i tread- m ill. The 510i treadmill offers a selection of features de- signed to make your workouts at home more effective and enjoyable. And when you’re not exercising, the 510i treadmill can be folded up, requiring less than half the floor space of other treadmills. For your benefit, read this ma[...]

ASSEMBL Y Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not d ispose of the packing materials until assembly is completed. No te: The unde rsid e of the tre admi ll w alki ng b elt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to t[...]

7 2. Attach two Round Base Pads (57) to the base of the right Upright (69) with two 1" Tek Screws ( 39). Attach a Wheel (66) to the base of the right U pright (69) with a Wheel Bolt (64) and a Wheel Nut (32) as shown. Do not overtighten the W heel Bolt; t he Wheel should turn freely. 39 66 32 39 69 57 64 2 4. Attach two Round Base Pads (57) to[...]

8 5. Insert the tab on one of the Handrail Brackets (5) into the slot in the right Upright (69). Attach the H andrail Bracket with a 3/4" Screw (2). A ttach the other Handrail Bracket to the left Upright ( not shown) in the same way. 6. Set the Console (43) face-down on a soft sur- face to avoid scratching the Console. Next, hold a Handrail (7[...]

10 . Attach the Latch Housing (29) and the Latch Spacer (98) to the left Upright (69) with two 3/4" Screws (2). Make sure that the large hole in the Latch Housing is on the side shown. Do not overtighten the Screws. Remove the knob from the pin. Make sure that the collar and the spring are on the pin as shown. Insert the pin into the Latch Hou[...]

10 OPERA TION AND ADJUSTMENT T HE PRE-LUBRICATED WALKING BELT Your treadmill features a walking belt coated with high- performance lubricant. IMPORTANT: Never apply sil- icone spray or other substances to the walking belt or the walking platform. Such substances will deteriorate the walking belt and cause excessive wear. HOW TO PLUG IN THE POWER CO[...]

1 1 FEATURES OF THE CONSOLE The treadmill console offers a selection of features designed to make your workouts more effective and enjoyable. When you select the manual mode of the console, you can change the speed and i nclin e of the treadmill with the touch of a button. As you exercise, the console will display continuous exercise feedback. You [...]

12 HOW TO TURN ON THE POWER P lug in the power cord (see page 1 0). Next, locate the r eset/off circuit breaker on the treadmill frame near the power cord. Make sure that the circuit breaker is in the “reset” position. Next, stand on the foot rails of the treadmill. Locate the clip attached to the key (see the drawing on page 11), and slide the[...]

13 The lower left display can show the elapsed t ime and the distance that you have walked o r run during your workout. Also, each time you change the incline, the display will show the incline setting for a few seconds. Note: When a program is selected, the display will show the time remaining in the program instead of the elapsed time. When a dis[...]

14 H OW TO USE A CALORIE GOAL PROGRAM I nsert the key into the console. See HOW TO TURN ON THE POWER on page 12. E nter your weight if desired. See step 2 on page 12. Note: It is important to enter your weight before using a calorie goal pro- gram. The console will adjust the speed settings of the calorie goal programs based on your weight. Select [...]

15 H OW TO USE A DISTANCE GOAL PROGRAM I nsert the key into the console. See HOW TO TURN ON THE POWER on page 1 2. S elect a distance goal program. To select a distance goal program, press the Program Select button repeatedly until “P 3” or “P 4” appears in the display. When a distance goal program is selected, the maximum speed setting of [...]

16 H OW TO USE A SPEED PROGRAM I nsert the key into the console. S ee HOW TO TURN ON THE POWER on page 11. S elect one of the speed programs. To select a speed pro- gram, press the Program Select button repeatedly until “P 5” or “P 6” appears in the upper display. The maximum speed and incline settings of the se- lected program will also fl[...]

17 THE INFORMATION MODE/DEMO MODE T he console features an information mode that keeps track of treadmill usage information and allows you to s elect a unit of measurement for the console. To select the information mode, inser t the key into the conso le wh ile holding down the Stop button, and then relea se th e Sto p butt on. When the information[...]

18 HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If this is not done, you may permanently d amage the treadmill. Next, unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill. 1. Hold [...]

19 HOW TO LOWER THE TREADMILL FOR USE 1. Hold the treadmill with your right hand as shown. Pull the latch knob to the left and hold it. Pivot the frame downward until it is past the latch pin. 2. Hold the metal frame firmly with both hands , and lower it to the floor. CAUTION: To decrease the possibility of in- jury, do not lower the frame by gripp[...]

20 TROUBLESHOOTING Most treadmill problems can be solved by following the simple steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, call toll-free 1-800-4-MY-HOME ® ( 1-800-469-4663). PROBLEM: The power does not turn on SOLUTION: a. Make sure that the power cord is plugged into a surge suppres[...]

21 PROBLEM: The walking belt slows when walked on S OLUTION: a . Use only a single-outlet surge suppressor that meets all of the specifications described on page 10. b . If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be- come damaged. Remove the key and UNPLUG THE POWER CORD . Using the hex key, [...]

22 CONDITIONING GUIDELINES The following guidelines will help you to plan your ex- ercise program. For more detailed exercise informa- tion, obtain a reputable book or consult your physician. EXERCISE INTENSITY Whether your goal is to burn fat or to strengthen your cardiovascular system, the key to achieving the desired results is to exercise with [...]

23 P ART LIST—Model No. 831.24624.0 R0806A Key N o. Qty. Description Key N o. Qty. Description Key N o. Qty. Description 1 1 Hood 2 22 3/4” Screw 3 1 Motor Belt 4 2 Motor Tension Bolt 5 2 Handrail Bracket 6 3 Motor Star Washer 7 5 Belly Pan Screw 8 1 Drive Motor 9 2 Foot Rail Cover 10 1 Reed Switch 11 1 Latch Warning Decal 12 2 Frame Spacer 13 [...]

25 102 14 18 17 14 34 82 83 35 15 72 86 15 23 38 23 83 82 92 40 45 34 94 53 1 1 85 84 2 30 53 31 67 67 33 33 9 44 74 44 84 85 55 55 38 25 2 2 36 36 53 33 33 78 9 33 33 33 33 33 33 38 38 38 84 38 84 99 EXPLODED DRA WING A—Model No. 831.24624.0 R0806A 24[...]

81 7 7 79 58 89 87 68 92 75 59 7 2 6 26 49 3 6 8 24 20 1 22 22 22 28 28 20 10 73 12 19 13 13 60 23 13 12 91 4 88 4 7 80 90 6 6 26 26 25 EXPLODED DRA WING B—Model No. 831.24624.0 R0806A[...]

42 70 62 2 29 98 71 42 27 56 39 69 39 57 39 39 57 62 63 64 32 66 65 58 61 58 61 57 13 54 13 54 93 46 65 93 63 46 64 66 32 37 95 37 95 37 95 37 71 2 100 100 95 97 97 101 101 101 101 2 2 2 1 6 16 57 103 103 51 54 13 13 52 104 21 2 2 5 21 2 5 2 109 106 107 108 11 0 26 EXPLODED DRA WING C—Model No. 831.24624.0 R0806A[...]

27 43 50 2 2 2 2 2 2 2 2 2 47 105 76 76 77 41 41 41 48 96 EXPLODED DRA WING D—Model No. 831.24624.0 R0806A[...]

Part No. 241618 R0806A Printed in USA © 2006 ICON IP, Inc. Y our Home For repair— in your home —of all m ajor brand a pplianc es, lawn an d garden equipm ent, or heat ing an d cooli ng s y stem s, no matter w ho made it, no matter w ho sold it! For the re placem ent parts , access ories, and user ’s manuals that you need to do- it-yours elf.[...]