PYLE Audio PLCD16MRWB manual

OWNER’S MANUAL MARINE/WEA THER-BAND AUDIO SYSTEM • PLL Synthesizer Ster eo Radio • Digital Compact Disc Player • Automatically Memory Storing • Slide Down Detachable Panel • Pr ogram CD T racks • CD Changer Contr ol • Auxiliary Input Function PLCD16MRWB www .pyleaudio.com[...]

2 CONTENTS Installation ..................................................................................................... 3 DIN Front-Mount.................................................................................................... 3 Installing the unit ....................................................................................[...]

Notes: • The unit can be installed on the vehicle or the ships. • Choose the mounting location wher e the unit will not interfere with the normal driving function of the driver . • Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly . • Us[...]

4 INST ALLA TION (Fig. 2) 1 2 6 5 4 3 7 OPEN button Front Panel 1 2 1. Dashboard 2. Nut (5mm) 3. Spring washer 4. Screw (5x25mm) 5. Screw 6. Strap Be sure to use the strap to secur e the back of the unit in place. The strap can be bent by hand to the desired angle. 7. Plain washer Removing the unit 1. Before r emoving the unit, pr ess the OPEN butt[...]

5 Open Bottom Button Bottom Button Protective Case Front Panel Front Panel USING THE DET ACHABLE FRONT P ANEL T o Detach the Front Panel 1. Press the OPEN button, the fr ont panel will slide down. 2. When the front panel slides down, press the bottom button of the fr ont panel upward and pull it out fr om the panel bracket. 3. For safekeeping, stor[...]

6 WIRING CONNECTION GREEN GREEN/BLACK GREY GREY/BLACK VIOLET VIOLET/BLACK MAIN UNIT WHITE WHITE/BLACK FRONT Lch SPEAKER REAR Lch SPEAKER FRONT Rch SPEAKER REAR Rch SPEAKER Rch RED Lch WHITE (GREY) RCA CABLE ANTENNA SOCKET RED YELLOW BLACK BLUE POWER ANTENNA GROUND (B – ) MEMORY BACK-UP IGNITION SWITCH (B+) CD CHANGER CONNECTOR SOCKET Rch RED Lch [...]

This unit is a marine rated wired r emote contr ol made using a modified contr oller or similar layout. It is capable of operation specified functions on the marine AM/FM/CD receiver and the marine AM/FM/Cassette r eceiver . The body , buttons, controls and display need to be UV and water -resistant. It includes and LCD and an illumination circuit.[...]

4 MODE SELECTION button Press the MODE button (4) to step sequentially thr ough the following sour ces: e.g. radio mode to CD mode (or cassette mode) to CDC mode to AUX in mode. 5 BAND SELECTION button Press the BAND button (5) to step sequentially thr ough the following bands: FM1, FM2, AM, WX. 6 TRACK/SEARCH/TUNE buttons • ST A TION SELECTION ([...]

1. First insert the hooks on the base into the slots of the holder to install the base to the holder . 2. Select the proper object, then place the r emote mounting bracket on the base and let the object go through the base and the mounting bracket. 9 INST ALLA TION INST ALLA TION HARDWARE HOLDER BASE REMOTE MOUNTING BRACKET SCREW ( ø 4X50) NUT X1 [...]

10 3. Align the screw holes on the holder with the scr ew holes on the base and the scr ew holes on the bracket, then use the two screws ( ø 4X50) and nuts to fix the bracket, the base and holder to the proper location. 4. Last install the remote contr ol to the holder . See below , align the four hooks on the holder with the four slots on the rem[...]

11 OPERA TION 14 19 8 13 12 11 9 1 22 23 20 21 24 6 16 17 10 2 7 15 18 3 4 5 25 V olume Bass T reble Balance Fader GENERAL OPERA TION • ON/OFF Switch on the unit by pressing PWR button (9). When system is on, press PWR button (9) again to turn off the unit. Press PWR button (9) for mor e than 2 seconds, the button is operated to initial volume co[...]

12 OPERA TION display . If you select beep sound on, whenever press any button, beep sound output. • LOUDNESS Press LOUD (DIM) button (15) shortly to reinfor ce the bass output and display will show “ LOUD ” . Press it again to release this function. • ILLUMINA TION Press LOUD (DIM) button (15) for mor e than 2 seconds to adjust the brightn[...]

13 OPERA TION RADIO OPERA TION • BAND SELECTION At tuner mode, press BAND button (18) shortly to select the desired band. The reception band will change in the following order: FM1 FM2 AM WX • ST A TION SELECTION Press button (16) or button (17) shortly to activate automatic seek function. Press for mor e than 3 seconds until “ MAN ” appear[...]

14 OPERA TION CD OPERA TION • SELECT TRACKS Press button (16) or button (17) to move to the previous track or the following track. T rack number shows on display . Hold press button (16) or button (17) to fast reverse or fast forwar d. Disc play starts from when you r elease the button. • P AUSE PLA YING Press /MUTE button (3) to pause CD playe[...]

15 Recordable Rewritable OPERA TION CD CHANGER OPERA TION • SELECT TRACKS Press button (16) or button (17) to move to the previous track or the following track. T rack number shows on display . Hold press button (16) or button (17) to fast reverse or fast forwar d. Disc play starts from when you r elease the button. • P AUSE PLA YING Press /MUT[...]

16 GENERAL P ower Supply Requirements : DC 12 V olts, Negative Ground Chassis Dimensions : 178 (W) x 178 (D) x 50 (H) mm Tone Controls - Bass (at 100 Hz) : ± 10 dB - T reble (at 10 KHz) : ± 10 dB Maximum Output P ow er : 4 x 50 W atts Current Drain : 15 Ampere (max.) CD PLA YER Signal to Noise Ratio : More than 55 dB Channel Separation : More tha[...]

17 TROUBLE SHOOTING Before going thr ough the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer . Symptom Cause Solution No power . The car ignition switch is If the power supply is properly not on. connected to the car accessory circuits, but the engine is not mo[...]

[...]

[...]

88-C1802-13[...]