Q-See QT528 manual

H.264 Dual S tream Netw ork DVR 8 Channel CIF@240f p s & D1 @240fp s Digital V ideo R ecorder USER MANU AL Model #: QT528 www . q - see.com R ev 12/6/201 0[...]

1 CAUTION  Please r ead this user manual carefu lly to ensure th at y ou can use t he dev ice corr ectl y an d safely  The contents of this manual are subject to change without notice  T his device should be use d with the pow er s uppl y provided . If the DVR is not going to be used for an extende d period of time unplug it.  Do no t i[...]

2 Table of Contents 1. INTRODUC TION .................................................................................................................................................. 4 1. 1 DV R Int rod uct ion ..........................................................................................................................................[...]

3 4.9 Adv ance d ........................................................................................................................................................................................................ 41 4.9.1 Reset .....................................................................................................................[...]

4 1. INTRODUCTION 1.1 DVR I nt rod uctio n This DVR uses high per formance v ideo process ing chip s and an embedde d Linux syste m. It utilizes many advanced technolog ies, such as st andar d H.264 with low b it rate, Dual S tr eam, SA T A int erface and VG A output. This DVR system support s mou se controlled nav igation and also ca n b e access [...]

5 AL AR M 1 channel alar m output an d 8 chan ne l alarm input available Support s sched uling for m ot ion detectio n and sens o r alarm Support s pre - re cording a n d post record ing Support s linked ch annels r ecor d ing once moti on or alarm is t r igger ed on des i gnated chan nel Suppor t s linked P TZ pres et , aut o c ruise a nd trac k o[...]

6 2. GE TTIN G ST AR TE D Check the un it and t he a ccessor ies im mediately af t er opening y our system . Please dis con nect the po wer befor e conn ecting to ot her device s. 2.1 Connecting to a monitor or TV The primary display on t h e DVR is VG A. T o use wit h a VGA monitor: 1. Plug the VG A cable (not inclu ded) t o t he VGA port on the D[...]

7 2. 2 Installing Hard Drive Not ice : 1. This DVR support s tw o SA T A hard drivers or one SA T A hard dr ive plus one DVD - RW W ri ter . 2. Please c alc ula te HDD cap acity accor ding to th e record ing settin g. Plea se refer to “A ppend ix B C alc ula te Recording Ca p acity ”. S tep 1: Unscrew and Open the top cov er S tep2: Connect t h[...]

8 2.3 Front P anel De s criptions Fi g 2.5 Front P anel Item Na me De scription 1 Power Status P ower ind icator, when connect ion , the l ight is blue 1 HDD Status W he n HDD is wr iting and reading , t he light is blue 1 Net work Sta tus W he n a ccess to net wor k , the lig ht is bl ue 1 Backup Status W he n b ackup fil es an d data, the light i[...]

9 2.4 Rear P an el La you t Fig 2.5 R ear Panel Item N ame D escription 1 PTZ Connect to spe ed dome . Y means “+ ” , Z means “-” 2 K/B Connect to P TZ key board 3 ALAR M IN C onnect t o ext er n al senso r s 1-8 4 NET Networ k port 5 VGA p o r t VGA output , conn ect to m onitor 6 Video out C onnect t o TV/ monit or 7 Video in V ideo input[...]

10 Fig 2.6 Remo te Control Item N ame F unct ion 1 P ower But t on Stops fir mwar e s o that y ou can pow er dow n D V R 2 INFO Button Get informati on about the D VR like fir mware version, H DD informati on 3 REC B utton To record m anu ally 4 Digi tal Button s I nput nu mbers or choose camera 5 Multi Screen Button To choose m ulti s creen di spl[...]

11 2.6 .2 Use Mouse In L ive: Double - cl ick left button on one ca mera to be full scr een display . Double - clic k again to return t o the previous scr een display . Click right but t on t o sh ow the cont r ol b ar at the bott om of the scre en as Fig 4 - 1 ma in menu toolbar Click right mouse again to hide the cont r ol b ar . In S etup: Click[...]

12 3. B A SIC FUNC TION 3.1 Pow er On/Off Before you pow er on the unit , pl eas e make sur e al l the connectio ns are good. 3.1.1 Power O n Step 1: Connect t he pow er supply ; sw itch on the po wer but t on near t he pow er port on t he r ear p anel Step 2: T he fir mware w ill be lo ade d, and the pow er indicator w i ll d is play blue Step 3: [...]

13 3.2 Lo gin User can lo gin and logout of the DVR sy ste m. User cannot do any other oper at ions exc ept ch ang ing the mul ti - screen display onc e logout. Admi n has f ull contro l ov er DVR. Fig 3 - 1 Login Notice: t he def ault user name a nd p ass word is “ adm i n ” and 123456 ” For inform ation o n how t o change pa sswo rd, add or[...]

14 3.3.1 Live P layback Clic k the Pla y button t o play back the recor d. Refer t o Figure3 - 3. User c an oper ate by clic king the b uttons on t he screen. Fig 3 - 3 Liv e Play back[...]

15 4. M A IN MENU SE TUP GUIDE Click right mouse or pres s ESC button o n the front p anel, t he control bar w ill display on the bottom of the screen, refer to Fig 4 - 1: Fig 4 - 1 Main Menu T oolbar C lick icon beside the screen display mode, a channel select dialo g will appear as below : T ak e 8 - channel DVR for example: user can tick of f 8 [...]

16 4 .1 B asic C onfiguration Basic conf ig uration inc lu des thr ee sub menus: sy stem, dat e & time and D ST . 4.1.1 Setu p Step 1: E nter into Set up config uration  b asic con figurat ion  se tup ; refer to Fig 4 - 3: Fig 4 - 3 Basic Co nfigurati on Step 2: I n this int er face us er can s etup th e device n ame, dev ic e ID, vide o [...]

17 4.1.2 Time & D ate Step 1: E nter into system configurat ion  basic co nfiguratio n  time & dat e; r e fer to Fig 4 - 4: Fig 4 - 4 Basic Co nfigurati on - T ime & D ate Step 2: S et the date format, time for mat, time zone in thi s interfac e; Chec kmark “sy nc time with NTP serv er” to refresh NTP serv er date; user al so [...]

18 4.2 Live C onfigurat ion Live configur at ion include s four sub menus: liv e, host monitor , SPOT and mask. 4.2.1 Live In this inter fac e, user can set up ca mera na m es, adjust color s: brightness, hu e, sat ur at ion an d contrast. Step 1: E nter into system con figurati on  live config uration  l iv e; refer to Fi g 4 - 6: Fig 4 - 6 [...]

19 4.2.2 Host M onit or Step 1: E nter into system config urati on  live config ur at ion  host moni tor; re fer to Fig 4 - 8: Fig 4 - 8 Live Configurat ion - H ost Monitor Step 2: S elect spl it mo de: 1×1, 2× 2, 2× 3, 3×3 , and c han nel Step 3: D well time: the time inter v al for a cert ain pict ure display before swit c hing to next [...]

20 4.2.4 Mask User can setup pr ivate m a sk area on the live image picture, max i mum of three areas. Fig 4 - 10 Live Conf iguration - Mask Set up M ask A rea: clic k Setting button, ent er i nto live i mage and press l e ft mouse but ton and drag mouse t o set mask area, re fer to pictur e below . Click Apply but t on t o sav e the sett ing. Dele[...]

21 4.3 Re cord C onfiguration Record co nf igur ation inc lu des five sub menus: ena bl e, r ecor d bit r at e, time, r ec ycle record an d st a mp. 4.3.1 Enable Step 1: E nter into system con figurati on  re cord co n figuration  enabl e; r efer t o Fig 4 - 11 : Fig 4 - 1 1 Record Configurat ion - Enable Step 2: C heckmar k record, audi o an[...]

22 4.3.2 Re cor d stream Step 1: E nter into system config urati on  re cord con figurati on  r e cord bit rat e; refer to Fig 4- 12: Fig 4 - 12 Record Co nfigurat ion - Record Bit Rate Step 2: S etup rate, r esol ution, qua lity , encode and max bit st r ea m Step 3: U ser can set up al l channels with s ame p arameter s, chec km ar k “All[...]

23 4.3.3 T ime Step 1: E nter into system con figurati on  re cord co n figuration  time; r efer t o Fig 4 - 13: Fig 4 - 13 Record Co nfigurat ion - Time Pre - alarm record time: set the record t ime before event happen i.e. record time be fore motion detect ion or sensor alar m is trigger ed. Post - alarm recor d : set the post r ecording t [...]

24 4.3.5 Sta m p S ta m p ： User can disp lay the channe l name and t i m e st amp on v ide o. Step 1: E nter into system config urati on  rec ord co nf igurat ion  sta mp; r e fer to Fig 4 - 14: Fig 4 - 14 Record Co nfigurat ion - Sta mp Step 2: C h eckmar k camera na me, time sta mp; click Set button, user can u se cursor to drag the ca m[...]

25 Sc hedul e c on figuration in clud es three s ub menus: s c hed ule, mot ion a nd alar m. 4.4.1 Sc hedul e Step 1: E nter into system config urati on  s che dule c onf ig uration  sc hedul e; r efer t o Fi g 4 - 15: Fig 4 - 15 Schedule C onfigura tion - Schedule Step 2: S elect chann el, doub le - cli ck and a dialog box w il l pop - up sh[...]

26 Fig 4 - 17 Schedule C onfigura tion - Motion Step 2: T he setup ste ps o f motion are si m i lar to schedu le; user ca n r ef er t o 4. 4. 1 Schedu le for det ail s. Note: the defa ult sch edule of moti on detect ion is al l of the ti me, that is, the color of sched ule interface i s all blue. 4.4.3 Se nsor Step 1: E nter into system con figurat[...]

27 4.5.1 Se nsor ( t o s etup o pt i on al external m oti on sensors) Sensor inc lu des t hree sub menus: bas ic, al ar m handling an d s ch edule. ① Basic Step 1: E nter into system config urati on  alarm con figur at io n  sens or  basic; refer to Fig 4 - 19: Fig 4 - 19 A larm Configuration - S ensor Basi c Step 2: E nable sen sor alar[...]

28 Fig 4 - 21 A larm Handling - Tri g g e r Step 3: C heckmar k Buzzer , ther e w ill be tri gger e d buzz er alarm out; Full scree n alar m : whe n t r iggere d alar m, there will pop up a n al arm full scr ee n; T o alar m out: ch eckmar k the channe l, there will be triggered alar m out on the designated c hannel. Click OK button to sav e the se[...]

29 ① Motion Step 1: E nter into system config urati on  alarm con figur at io n  mot ion; r e fer to Fig 4 - 23: Fig 4 - 23 Alar m Configuration - Motion Step 2: E na ble motion ala rm, set alar m hold time wh ich means time interv al be tween tw o consecutiv e motion event s. If there is oth er motion d etected dur ing the inter val period[...]

30 user can adjust it s valu e accordin g to the practica l conditions; click icon, set t he whole area as detect ion area; cl ick icon, t he set detection area w ill be cleared; clic k icon, user can test whether the sens itivity value an d motion are a ar e suit abl e t o cur r ent cond itions （ re fer to follow ing pi ct ur e ） ; Click icon,[...]

31 Step 1: E nter into system config urati on  alarm con figur at io n  vid eo lo ss ; r ef er t o Fig 4 -27: Fig 4 -2 7 Al arm Configuratio n - Video Loss Step 2: T he setup step s of video lo ss t rigger are fa miliar with al ar m handling; user can refer to Ch apter 4.5.1 Sens or  alarm handl ing for more det ails. Step 3: U ser can set[...]

32 Alarm out inc ludes three s ub menus: alar m out, sc h edule and buz zer ① Alarm out Step 1: E nter into system con figurati on  alarm out; r efer t o F ig 4 - 28: Fig 4 - 28 Sy stem Configurati on - Alar m Out Step 2: I n this interface, set relay alarm out na me, select hold time which means the interv al time betw een the two consecutiv [...]

33 4.6.1 Net work Step 1: E nter into system config urati on  networ k conf iguration  net wor k; ref e r to Fig 4- 29: Fig 4 - 29 Network C onfigurati on - Network Step 2: HTTP por t: the default v alue is 80. If this v alue is changed, user need s to add the port number w hen typing I P address in IE ad dress bl ank .i.e. set HT TP port to [...]

34 Us er nam e User na me o f broa d band accou nt Password Password of broad band a ccount DDNS serv er DDNS server Web site provi ded by dynam ic domain na me supplier . The optional: myq - see.c om, www .dyndns.com Us er nam e User name t o log in to the website of domain na me supplier Password Password to log in to the website o f domain n ame[...]

35 Fig 4 - 3 0 network conf iguration - em ail SMT P Server/Po rt: the nam e and port num ber of SMTP server . Tic k o ff “ This server requir es a secure con nection ( S SL) ”; user c an setup m ail servers (suc h as Gm ail ) acc ording to actual ne eds, S end add ress/password: sender ’ s email a ddress/pas sword R eceive addre ss: r eceive[...]

36 DDNS server DDNS server W ebs ite prov ided by dynami c domain n ame suppl ier . T he option s : myq - see.com and ww w .dyndns.com U ser name U ser name f or l og in set up on th e websit e of domai n name suppl ier Password P assword for l og in to th e website of domai n name supplier Hos t dom ain T he domain name u ser reg istered at the s [...]

37 ② Authority : Step 1: E nter into Add us er  author ity ; refer to Fig 4 - 36: Fig 4- 36 Add User - Authority Step 2: In the author ity interfac e, assign the d efinite oper at i on r i ght for that use r . Step 3: In the us er mana gement int erface, c lick Set up button to modify user name, us er ty pe and bindi ng PC MA C address i f use[...]

38 Fig 4 - 37 P .T .Z Co nfiguration - Serial Port Step 2: C heckmar k Enable, setup the value of ad dress, baud rate and pr otocol acc ording to the settings of the PT Z speed do me. Step 3: U ser can s et up al l channels with s ame p arameter s, chec km ar k “all”, then t o do r el evant set up. Step 4: C lick “de fault” b utton to rest [...]

39 Fig 4 - 38 P .T .Z C onfiguration -A dvance Step 2: I n the Advance inter fac e, cl ick preset “ Set t in g” button, a dia log b ox will pop - up shown as F ig 4 - 39: Fig 4 - 39 A dvance -P reset S ettin g a. I n the preset s et inter face, clic k Sett ing button, a di alog will po p - up shown as F ig 4- 40:[...]

40 Fig 4 - 40 P reset S et -Setting b. U ser can c ontrol the do me r otatin g up, up le ft, dow n, right dow n, lef t , lef t down, right and up r ight and stop rot ating; adj us t t he r ot ate spee d and the valu e of z oom, focus an d iris of t he do me; c. S elect the s erial nu mber of the preset p oint, set the preset na me. Clic k Save but [...]

41 Fig 4 - 42 C ruise S et -M od i f y C ruise L ine a. C lick Add icon to set the speed and t i me of preset point; select a pr e set point, click Delete ic on to delete that pr es et point; c lick M odify ico n to modify the s et t ing o f a preset poi nt . User can cl ick icons to adjust the p osition o f pres et point. C li ck Pr ev iew button [...]

42 4.91 R eset Note: Before you do the reset, we rec omme nd y ou do a n Im port/Ex por t first t o save all of y our s et tings (see i nstru cti ons bel ow). A fter the res et y ou wil l t hen be able to re store all of your set tings. R eset all se ttings th e devic e will rebo ot. 4.9.2 I mport/E xport U ser can ex port the data files into PC as[...]

43 5. RECORD, SE ARCH, PL A YB ACK AND B A CKUP Search con figurat ion inclu des t hr ee su bmenus : t i me s ear ch, ev ent search a nd file man ager . 5.1 Time S earch Step 1: E nter into Search config urati on  ti m e se arch; r efer t o Fi g 5 - 1: Fig 5 - 1 Search C onfigu rat ion T ime S earch Step 2: S ele ct channe l, screen dis play mod[...]

44 5.2 Event S earch Step 1: E nter into Search config urati on  event sear ch; refer to F ig 5 - 2: Fig 5 - 2 Search Co nfiguratio n - Event Search Step 2: C lic k Search button, the search ed ev ent infor mation w ill be di splayed in the event list box. Select d ate, channel, ch ec kmar k Mot i o n, Sensor or All accor di ngl y . Step 3: D ou[...]

45 (unless y ou for mat the har d dr iv e). ② Unlock: chec k a locked fi le, click Loc k button t o unl oc k this file ③ Del et e: ch eck an un lock ed fil e, cli ck Del et e butto n t o del et e t his file. Step 3: C heckmar k “All” but t on; user can l ock/unlo c k or delete a l l files in the file manager co lu mn. Step 4: D ouble clic k[...]

46 6. DVR M AN AGEMEN T 6.1 Checki ng System I nf orm at i o n Check sys t e m informat ion includes f iv e sub menus: sy stem, event , log, net w or k and on line us ers. 6.1.1 System I nformation In this inter face, user can check th e hardw are versi on, MCU ver sion, kernel versio n, device I D, etc. ref er to Fig 6 - 1: Fig 6 - 1 S y stem I nf[...]

47 6.1.1 Log I nformation In this inter fac e, user can chec k relevant lo g in forma tion accord ing to selecte d date; refer t o F ig 6 - 3: Fig 6 - 3 L og I nfo rma tion 6.1.2 Network i nf or m ati on In this inter fac e, user can chec k relevant par ameter s of networ k; r ef er t o Fi g 6 - 4: Fig 6 - 4 N et work I nformation 6.1.1 On line I n[...]

48 6.1.2 M anua l A larm In this interfac e, us er c an check the re lev ant par am et er s of ma nua l alar m; r ef er t o Fig 6 - 6: Fig 6 - 6 M anual A larm 6.1.3 Disk M anag er Step 1: E nter into disk m anager int er f ace; re fer t o Fi g 6 - 7: Fig 6 - 7 D isk M anager N ote: ple ase format the hard disk before r ecord. I f not being formatt[...]

49 7. REMO TE SURVEILL ANCE 7.1 Net work Access Access ing the DV R from a comput er att ache d t o the same router : I f you are only going to access the DV R fro m a computer that is att ache d to the sa me router as the DVR you on ly need t o setup the inf ormation in the NET W ORK set tings us ing either t he DH CP option o r assign ing a stat [...]

50 Fig 7-3 DHCP St atic I P: Y ou will need to setup the n etwork set tings on the DVR to matc h the set tings of the rout er that you att ach t he DV R to. T o get the router set t ings y ou would go to the run option on a computer at t ach ed t o t he same router as the DV R and type cmd and hit OK to br ing up a command pro mpt (Fig 7 - 4), then[...]

51 Fig 7-5 St ati c IP For the D VRs IP addres s y ou would enter t he sa me first 3 sets of num bers as t he gatew ay and s elect a f ourth set of numbers that is diff erent then any other device att ached to t he same router . If the IP address of y our computer in the ipc on fig (BLUE arr ow in Fi g 7 - 4) was a single or t w o digit number you [...]

52 Fig 7-6 PPPoE DDNS : Y ou can access the DV R through a st atic or dy namic IP address; however a dy namic address can change fro m time to time. How oft en depen ds on your service prov ider . When it changes y ou need to go to a website such as www .myi padd res s.com from a computer at tached to t he same router as t he DVR to find out what t[...]

53 Fig 7-7 DDNS Setti ng up MYQ - SEE DDN S: NOTE : Befor e y ou setup D DNS y ou mus t fir st set up Por t For wardi ng as di rect ed in S ectio n 7. 3 POR T FOR W A RDING . Once you hav e enabled Port Forwar ding, you can con figure y our DDNS infor mation by followin g t hese s t e ps: a. Using a co mputer that is connected to t he same net work[...]

54 Fig 7-8 Registrati on a. The next s creen wi ll ask you to c reate a do main na me. D omain n ames m ust st art wit h an (a - z) or (0 - 9) and cannot cont ain a hy phen. Once you choose your do main name, clic k on the [Request Do main] button. This will generate a confir mation s cree n which te lls y ou if your Do ma in name is availabl e an [...]

55 a. Once y ou hav e completed s t ep s a - d, go t o t he M ain Menu and sele ct the Setup icon (Red bo x in Fig 7 - 10), then sele ct the Networ k icon (R ed box in Fi g 7 - 1 1), thi s will dis play the NETW ORK screen show n i n Fi g 7 - 12. Fig 7- 10 Main Menu Fig 7- 11 S etup b. Put a check mark in the D DNS option ( Red Box in F ig 7 - 12),[...]

56 d. Aft er you enter the inform ation clic k on the T est but ton (G reen box in Fi g 7 - 13) and wait until y ou see the O K message i n t he bot t om lef t hand corner o f the scree n. e. Click t he [APPL Y] button and the n the [EX IT] butt on at the b ottom of the N ET W ORK s creen a nd your DDNS setup is co mp let e. Fig 7 - 1 3 m yq - see [...]

57 b. Choo se y our DVR or Series (QT , QS DT , QR, QS etc ) from th e list provided c. S elect the make and model of your router fro m the list d. Click o n t he ‘ Cli ck here to ski p t hi s a dverti sem e nt…’ link in the upper rig ht cor n er of the scr ee n. Notice: When y ou go to the www .port for ward.com web site y ou will see an ad [...]

58 e. Follow the instruct i o n on the web si t e ( Th e top s et of instr ucti ons ar e do ne o n the DV R. The bottom set of instru ctions are d one on the router ) f. V erify the port s ar e op en and tr af f i c i s al l owed a. Go to www .c anyouse eme.org b. T y pe the port numbe r th at y our DVR requires in the box.( Se e pictur e) The defa[...]

59 c. V erify that th e port(s) is op en. i. If the port is ope n, you w ill see t he followin g message: ” Succ ess. I can see y our service…” ii. G o t o t he section below : T o access the DVR thr o ugh Inter net Explor er iii. O t her w ise, if the port s are not open, y ou will get the fo llowing m essa ge: “ Error: I could not see you[...]

60 i. Af t er y our ISP unblocks th ose port s for you, r epeat s teps i an d ii. When y ou access the DVR from a remo te computer you also nee d to use a diffe rent add res s in the Interne t Explore r browser window . I nstead of enter ing the I P addres s of the D VR yo u need to ente r t he public IP addre ss of the router the DVR is attached t[...]

61 Pic 9 Pic 10 Cli ck on Se curi ty T ab . Clic k on T rus ted Si tes. C lick on Sites button. P i c 11 Uncheck the box for Requ ire Serv er veri fication. Put the IP ad dess of the D VR or W AN IP addre ss in the Add this w ebsites to the z one box and click on A dd button. Cli ck on Cl ose .[...]

62 5 If you get a error mes sage that s ays the pr ogram cannot load becaus e the publis her is unk nown or the pro gram is unsigned, go to inter net ex plorer , tools, inter net opti ons (r efer to Pic 9) , then go to the “Adv anced” tab (RED box in Pic 14), this will open the wind ow in Pic 1 5, scroll do wn to “S ecurity”, and select the[...]

63 connect t o sam e Router as your DVR). Notic e : If you cannot use HTTP port 80 or 6036 becaus e the port is being used by anothe r program, or it is being bloc ked by your service provi der , you can use another por t in the same range. If you do so then you need to forwa rd the IP address of the route r to the other port, c hange the port in t[...]

64 7.5 Usin g the Remote A c cess Soft wa re Once you hav e setup Internet Expl or er y ou can access t he DV R t hroug h a browser w indow . If you are accessi ng t he DVR over t he networ k you would ent er the I P addr ess of the DVR into the addr ess bar . If you are accessi ng the DV R from a remote c omputer you will ent er the public I P add[...]

65 N ote: click button to r e cord m anual ly and the r ecor d ed file w ill be sa ved on y our PC har d driv e . S creen di spl ay mode: C lick the icon beside the s cr een displ ay mode, cha nne l select dialo g will app ear as show n below: Fig 7 - 22 Channel S elect D ia log U ser can c heckmar k channels form 1 - ch t o 16 - ch at random to di[...]

66 Color A djustme nt : Drag the slide bar to adjus t Brightness, Contrast , Hue, and Satur ation. Cl ick Defau lt to reset them to original value. BUTTON DESCRIPTION Drag the scr o ll bar t o adju st t he brightn ess o f chann el Drag the scr ol l bar t o ad just t he cont rast of chann el Drag the scr ol l bar t o ad just t he sat uration of ch a[...]

67 R ight c l ic k the mouse o n t he liv e i nt erface t o ge nerat e a pul l - down menu as shown below : Fig 7 - 25 R ight K e y S ub M enu Stream: this DVR su pport s master str eam and sub str eam. Master str eam has higher fra me rate, max 25FPS (P A L)/ 30FP S (NTSC) for every channel. Howev er , to ensure opti mal funct ion, an incre ased n[...]

68 Fig 7 - 27 Ti me Sear ch Interf ace Step 2: C lick “Search” bu tton. The recor d dat a will be displ ayed in the d ata infor matio n list box . T he high light date in the area marked  means t here is recorded dat a for t hat channel at that t ime . S elect the record channels in the ar ea marked  . Step 3: User can set t he dat a p la[...]

69 By Ev ent Search : Step 1: Enter into Search  event search; r e fer to Fig 7 - 29 : Fig 7 - 29 Even t Search Int erface Step 2: C lick the highl ight date and sele ct record chan nels and then ch eckmark the ev ent type: motion and sensor , click “searc h” b utton Step 3: T he ev ent s wi l l be display in the ev ent list box, double - c [...]

70 7.6.2 Re mote B ac kup Click Back up b utton to ent er into bac kup inter f ace, refer to F ig 7 -3 1: Fig 7- 31 Remot e Backup Int erface Step 1: S elect chann els, set t he star t and end t i m e, then click “searc h’ button, the file infor mation w il l be displayed in the file list bo x Step 2: S elect bac kup file s, c lick “br owse?[...]

71 Fig 7 - 32 Remot e Menu Set up The sub m en u lists and th e opt ions in ev er y item are sim ilar t o thos e o n the DV R. P lease r efer to Cha pter 3 M ai n Menu Setup G u ide for mo r e det ai ls. Click “sav e” button to s av e above sett ing s; clic k “de fau lt” butt on w ill recover t h e origina l set t in gs.[...]

72 8. MOBI LE SURVEILL A N CE This DVR s upp ort s mobi le sur veil lance by Iphone, or smart phones w ith Windows Mob ile Pro an d sy mbia n OS on 3 G networ ks. We test ed on Wind ow Mob ile Pro 6.1 and 6. 5. T o acce ss the DVR fro m a mobile ph one you first ne ed to setup the netw ork configu ration on the DVR, refer to Chapt er 4.6 Networ k c[...]

73 Step 5 ： Input the DVR’ s address, ID and pas sword respectively in the colu mns of “Server” , “User” and “Password”, and click “Go” t o l og on the DVR. I t w ill show the pict ure if accessed su ccessf ully . Step 6 ： C a mera 1 is the defau lt channel a fter l og in. Chan ge t he cha nnel in t he dr op dow n menu of “C[...]

74 8.2 Phones w ith Symbian Please use t he s mart pho nes with Sy mbian vers io n s suppor t ed by this unit. Step 1 ： Fir st enable the networ k access on the mobile phone. The n r un Web browser . Step 2 ： In put t he D VR’ s I P addres s in a new - built boo kmark. Clic k this bookm ark to conne ct to the DV R . Step 3 ： A welco me wi n[...]

75 Step 7 ： Click Sys tem s etting --- >Login Setting t o ent er log in int er fa ce. Step 8 ： In put t he D VR’ s address, I D and passw ord r es pect iv ely . Then sav e. Notic e : Abo ut Acce s s point, there m ay be dif feren t access point s in differen t countrie s or from servi ce providers . Step 9 ： Enter Liv e V iew , it w ill [...]

76 8.3 F or iP ho ne Mobile C lients 1. Install ing through i ph one. S tep 1. O pe n App S tor e f u nction of ipho ne S tep 2. E nable “se ar ch” function to search “ S uperCa m” S tep 3: C li c k Super Cam , enter into “intr oduc e” inter fac e and then cl ic k “FREE” , it w ill change into “I N S T ALL” S tep 4: I nput i T u[...]

77 S tep 1: I nst a ll iT unes store in PC an d then log in St e p 2: Connect i Pho ne and P C S tep 3: E nable “se ar c h” f unctio n to search “S uper Cam” S tep 4: Click “free app lication” but t on S tep 5: I nput ap ple ID and p assword, t hen c lick “acq uir e” S tep 6: T ick off “sy nchr on ously app ly program” an d “S[...]

78 2. Main Interface 【 Play back 】 playback record file 【 Image 】 image v iew 【 Log 】 log record 【 Server List 】 device list 【 Live 】 live v iew 【 Settings 】 software setti ng 【 Information 】 device infor mation vie w 【 Help 】 soft w ar e hel p center 【 Logo ff 】 logof f and return t o l ogi n interfac e 3. Live [...]

79 Switch to the s ingle image Switch to four i m ages Upward rot ates t he P TZ Downwar d r ot ates the P TZ Left w ar d r ot ates the P TZ Rightward r ot ates the PTZ S top r ot at ing t he PTZ Zoom In/F ocus I n/ Iris Add Zoom Ou t/Focus Out/Iri s Sub Preset elect t he pr e set po int Group Set t he c r ui se l ine S peed Rotate s peed of the PT[...]

80 Main p ar a meters for mobile phon e video co nf ig Record file c lip siz e : Single video size. When the video size is great er than setup value, cha nge anot her v ideo file s Reserv ed disk sp ace : R eserved S D Card d isk sp ace, when the d isk sp ace is less than s etup val ue, the video will be stopped Disp lay conf ig ： Display mo de: [...]

81 8.4 For A ndroid Mobile Cl i ent s Sof t ware Inst allation S tep 1: r un G oo gle Mar ket progra m S tep 2: search”S uper Cam ” S tep 3: pr es s “Inst all” butt on St ep 4: click “OK ” but ton S tep 5: user can v iew the dow nload a nd inst all pr ocess in notificat ions; f inished downloa d, the s oftw are w ill inst al l auto mat [...]

82 Main menu 【 Play back 】 playback r ecor d file 【 Image 】 image v iew 【 Live 】 live v iew 【 Log 】 log record 【 Server List 】 device list 【 Settings 】 software setti ng 【 Information 】 device informati on v iew 【 Help 】 software help center 【 Logof f 】 logof f and return to log in interface Live view ( Fig 1 ）[...]

83 Ima ge vi ew Record play back （ Fig 3 ） （ Fig 4 ） Click the re cor d f i le ( F ig 3) to play bac k (Fig 4) Play/p ause stop Full screen Return to record file inte rface (Fig 3) Server l i st[...]

84 Config interface Alarm setting T ick of f Sound A larm ， when V ideo Loss/ Sensor /Motion happen ， trigg er sound al arm; T ic k off V ibrate Ala rm, when Vide o Los s/Sens or/ Motion happen ， tr i gger v ibrate alar m St orag e settin g User can setup t he relevant para meters of mob ile video. Th is function can be v alid only insert SD [...]

85 8.5 For B lackberry M obile Client s Requires Blackberry OS 5 Inst all a t i on inst ructi on f or Bl a c kBerr y Mobi l e ph one Cl i e nt 1. Open the brow ser o n BlackBerr y phone and enter sever addr ess 2. Cl ic k “ Super Cam ” to li nk to application 3. Cl ic k “ Downl oad ” button on t he pop up me nu and the dow nl oad progres s [...]

86 2) Enter into Me nu - >Option - >Cache O per ations, clear up brow ser ca che. Note ： When you use t he Su perCam sof t ware in mo bile ph one s wit h touch sc re ens the re will b e a compatibilty probl em. Soluti on: Enter int o Options Menu - >Adv ance options - > Applicat ions - > SuperCa m and click “Disabl e Comp at i bi[...]

87 3. Live view Ma rk 1 Current v iewing chann el Ma rk 2 Channel st atus Switch chan nels PTZ, click to switc h to Fig 2 interface Snap F ull screen B ackgrou nd alarm S top r ot at ing the PTZ Upward rot ates t he P TZ Downwar d r ot ates the P TZ Left ward rot ates t he P TZ Right ward r ot ates the PTZ Zoom In/F ocus I n/ Iris Add Zoom Ou t/Foc[...]

88 Software configuration Information view[...]

89 9. PRODUC T SP ECIFIC AT IONS IT EM DEV ICE PA RAMET ER SP ECIFIC A TION COM PRESSIO N COMPRESSION FORM A T S tandard H.26 4 Baseline VIDEO VIDEO IN CO MPOSIT E 1.0 V p- p/ 75Ω , BNC x 8 VIDEO OUT COMPOS IT E 1.0V p- p/ 75Ω , BNC x 2, VG A x 1 V GA RESOLUTION 1280 *1024/ 1024*768 / 800 *600 RECORD RESOLUT ION 352*288/70 4*576 ( P AL) 352*240/7[...]

90 Appendix A FAQ Q1. The DVR doe s not s t art aft e r c onne cting t h e power , what is wr o ng? a. The power adapt er may have been da maged, or i s not prov iding en ough po wer . Please change t he adapter . b. The DVR may not be getting enoug h power fr o m the outlet or surg e protect or it is att ached t o. c. There could be a pr ob lem wi[...]

91 Q 10 : H ow do I i np ut p as swor d a nd di gi t al number s ? T o input p assw or d an d digit al nu mb er s cl ic k the box behind p ass word or i t ems where you need to input numbers, and t hen a smal l key boar d w ill appe ar . Please select number or let t e r to input (t he def au lt pass word is 123456), or y ou can use the dig ita l k[...]

92 Q16:. What are t he P C co nf i gurati ons f or 8- ch rea l tim e access with fully open mainst r eam c hannel ? PC MODULE P A R A M AT E R S CPU Intel C ore(TM)2 Duo CPU E4600 MOTHERBO ARD G41/P41 ch ip HDD 80G R AM 1GB VGA GMA3100/NV IDIA GeForce 8400/ AT I R A D E O N HD3450 OS W indow s 2000( SP4 above) / W indows XP(SP2 above) / VIST A/Win7[...]

93 Appendix B Calcula te R ecord ing Cap acit y (D1) Users can c alculate t he size of har d disk accor ding to t he saving tim e and DVR rec ording s ettings. The DVR uses fixed video bit rate. The below ar e t he det ails at dif ferent set t i ngs. Vide o For mat Res oluti on Fram e Ra te T ot ally(FP S) V ideo Qua lity Bit Rate (k bps) U sed Spa[...]

94 A PPEND IX B : C AL CUL A T E RECO RDING C A P A CI TY (CIF) Users can ca lculate the h ard driv e si ze neede d accordin g to the time sav ing specifi cation and D VR recor ding setting s listed below . Below is an esti mated tab le outlinin g hard drive sp ace used when t he DVR is configur ed at various settings. VIDEO F O R M AT RESOLUTION F[...]

95 Appendix C Com p atib le Dev ices 1. Comp ati ble USB dri v e af ter test. Br and Capaci ty SSK 512MB, 1G , 2GB Ne tac 4GB Kingston 2GB Aigo 2GB Smatter v ider 1GB Sa nDisk 4GB T ab C.1 Compatible USB drive 2. Comp ati ble SA T A CD/DVD wri t er s af t er t e st Br and Mode l TEC LAST GH2 2NP20 /T L - 22XD BEN Q DW 220S - 0K4 LI TE ON DH — 20A[...]

96 (4) Equipment d amag e caused by the mainten ance o f perso nnel not aut horiz ed by Q - See. (5) Product sold ov er 12 months ag o. In order to fulfill th e ter ms of y our w arranty , y ou must co mplete the reg istrat ion proc ess a fter purchasi ng our pro duc t. T o do this , simpl y fill out t he Us er ’s Informati on Car d bel ow an d f[...]

Customer Information Card User ’s Name Mr ./ Mr s. Company Name Postal A ddress Postal code Phone Number E- mail Model Number of Product Serial N umber of Product Purchase Dat e Distri butor The mater ial in this document is the int ellect ual proper ty of Q - See. No part o f this manual may be reprod uced, copi ed, trans lated, tran smitted, or[...]