REVO RM185-OR1 manual

18.5-INCH WIDE LED MONITOR USER MANUAL Please read this manual thoroughly before use, and keep it handy for future reference.[...]

[...]

SAFETY INSTRUCTIONS ………………………………………………………….….. 2 ~ 3 CAUTIONS …………………………………………………………….......... ................ 4 FCC RF INTERFERENCE STATEMENT ……………………………..... .................. 5 CONNECTING WITH EXTERNA L EQUIPMENT ……………?[...]

Important Safety Instructions 1. Read these instructions. 2. Keep these Instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this monitor near water . 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Inst all in accordance with the manufacturer ’s instructions. 8. Do not install near any heat source[...]

- The monitor shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed no the apparatus. Minimum distances(e.g. 10cm) around the apparatus for sufficient ventilation. “W ARNING – T o reduce the risk of fire or electric shock, do not expose the monitor to rain or moisture.” This symb[...]

NEVER REMOVE THE BACK COVER ▶ Removal of the back cover should be carried out only by qualified personnel. DO NOT USE IN HOSTILE ENVIRONMENTS ▶ To prevent shock or fire hazard, do not expose the unit to rain or moisture. This unit is designed to be used in the office or home. Do not subject the unit to vibrations, dust of corrosive gases. KEEP [...]

NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Thes e limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installe[...]

Before setting up the monitor , ensure that th e power to the monitor a nd other attached devices are turned off. ※ Notice: Stand & screws are optional. A. Connecting the stand 1. Place the monitor with its fron t facing downward on a soft cloth. 2. Assemble the Stand Base into the Stand B ody in the correct dire ction using the included scre[...]

1. Rear Connection 1. 3.5mm AUDIO OUT. 2. 3.5mm AUDIO IN. 3. VGA. 4. DC 12V. - 7 -[...]

2. Bottom Key Control 1. SELECT Selects an option in the OSD. (On Screen Display) 2. MENU Activates or exits the OSD. Moves previous menu or status in the OSD. 3, 4. AUTO/ ▼ & ▲ Moves another option in the OSD. The ▲ button converts the aspect ratio as 16:9 or 4:3. The AUTO/ ▼ button is auto adj ustment function. 5, 6. VOL(-) & VOL([...]

OSD (On Screen Display) Menu Description All picture, sound settings and setup for the monitor can be adjusted in the OSD menu. To adjust the OSD screen: 1. Press the MENU button to enter the OSD menu. 2. Press the ▲ / ▼ buttons to select the desired option. The selected option is yellow color. 3. Press the SELECT button twice to enter the sub-[...]

2. Image Setting Option Function Value Clock 1) Adjusts the vertical noise of screen image. 0 ~ 100. Phase 1) Adjusts the number of horizontal picture elements. 0 ~ 60. Gamma Adjusts the gamma of the picture. 0 ~ 3. Sharpness Adjusts sharpness of the picture. 0 ~ 4. Auto Adjust.. 1) Auto geometry adjustment. Back Returns to previous menu. - 10 -[...]

3. Position Option Function Value H. Position Adjusts the horizontally picture position. 0 ~ 100. V. Position Adjusts the vertically picture position. 0 ~ 100. Back Returns to previous menu. - 11 -[...]

4. OSD (On Screen Display) Menu Option Function Value OSD H. Pos. Moves the horizontally OSD position. 0 ~ 100. OSD V. Pos. Moves the vertically OSD position. 0 ~ 100. OSD Timer Adjusts the display time of OSD. 5 ~ 20. Back Returns to previous menu. - 12 -[...]

5. Language Option Function Value Language Sets the language of OSD menu. English, Korean, French, German & Spanish. - 13 -[...]

6. Misc. Option Function Value Signal Source Shows the signal source. VGA Fit to screen Converts the aspect ratio. 16:9 & 4:3 Volume Adjust the level of audio volume. 0 ~ 100. Reset Resets the monitor settings to the factory default. Back Returns to previous menu. - 14 -[...]

7. Exit Option Function Exit Exits the OSD menu. - 15 -[...]

W all mounting (Optional) The LCD monitor is suitable for wall mounting by using the VESA 100 standard wall mount (not included). ※ Attention! Y ou must use four M4x10 screws to assemble this monitor and the wall mount bracket. - 16 - 100 100 M4x10 screws[...]

P ▶ in Assignments Pin 1 RED VIDEO 9 2 GREEN VIDEO 10 SIGNAL CABLE DETECT 3 BLUE VIDEO 11 GROUND 4 GROUND 12 SDA(for DDC) 5 GROUND 13 H-SYNC.(or H+V SYNC.) 6 RED GROUND 14 V-SYNC. 7 GREEN GROUND 15 SCL(for DDC) 8 BLUE GROUND D-SUB ▶ Accessories 1. Power Adaptor (Power Cord Included). 2. User Manual. 3. VGA(RGB-PC) Cable. 4. Stand & FS4x12 S[...]

This monitor features a pow er management system to “power down” upon receipt of the VESA DPMS(The display power management si gnaling) from a VESA DPMS video card. The VESA DPMS-compliant video card perfo rms this signaling system through not sending horizontal, vertical, or sync signal. This monitor enters an appropriate mode through identify[...]

18.5” LCD Type 18.5 ˝ Diagonal AM-TFT(Active-Matrix) Pixel pitch( ㎛ ): 300(H) x 300(V) Brightness: 250cd/ ㎡ (Typical) Contrast ratio: 1000:1(Typical) Viewing angle: 170°/160°(H/V) Response time: 5ms(Typ., on/off) Resolution (H x V) 1366X768@60Hz Frequency Horizontal: 31~64kHz, Vertical: 56~75Hz Input Signal VGA(RGB-PC) Audio in & out A[...]

WEEE Symbols - 20 - Correct Disposal of This Product (Waste Electrical & El ectronic Equipment) (Applicable in the Euro pean Union and other European countries with se parate collection systems) This marking shown on the product or its liter ature, indicates that it should not be disposed with other household was tes at the end of its working l[...]

MEMO[...]

MEMO[...]

MEMO[...]

MEMO[...]

[...]

P/N: L39ME0230 Rev.0[...]