Ricoh A251 manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151

Ir a la página of

Buen manual de instrucciones

Las leyes obligan al vendedor a entregarle al comprador, junto con el producto, el manual de instrucciones Ricoh A251. La falta del manual o facilitar información incorrecta al consumidor constituyen una base de reclamación por no estar de acuerdo el producto con el contrato. Según la ley, está permitido adjuntar un manual de otra forma que no sea en papel, lo cual últimamente es bastante común y los fabricantes nos facilitan un manual gráfico, su versión electrónica Ricoh A251 o vídeos de instrucciones para usuarios. La condición es que tenga una forma legible y entendible.

¿Qué es un manual de instrucciones?

El nombre proviene de la palabra latina “instructio”, es decir, ordenar. Por lo tanto, en un manual Ricoh A251 se puede encontrar la descripción de las etapas de actuación. El propósito de un manual es enseñar, facilitar el encendido o el uso de un dispositivo o la realización de acciones concretas. Un manual de instrucciones también es una fuente de información acerca de un objeto o un servicio, es una pista.

Desafortunadamente pocos usuarios destinan su tiempo a leer manuales Ricoh A251, sin embargo, un buen manual nos permite, no solo conocer una cantidad de funcionalidades adicionales del dispositivo comprado, sino también evitar la mayoría de fallos.

Entonces, ¿qué debe contener el manual de instrucciones perfecto?

Sobre todo, un manual de instrucciones Ricoh A251 debe contener:
- información acerca de las especificaciones técnicas del dispositivo Ricoh A251
- nombre de fabricante y año de fabricación del dispositivo Ricoh A251
- condiciones de uso, configuración y mantenimiento del dispositivo Ricoh A251
- marcas de seguridad y certificados que confirmen su concordancia con determinadas normativas

¿Por qué no leemos los manuales de instrucciones?

Normalmente es por la falta de tiempo y seguridad acerca de las funcionalidades determinadas de los dispositivos comprados. Desafortunadamente la conexión y el encendido de Ricoh A251 no es suficiente. El manual de instrucciones siempre contiene una serie de indicaciones acerca de determinadas funcionalidades, normas de seguridad, consejos de mantenimiento (incluso qué productos usar), fallos eventuales de Ricoh A251 y maneras de solucionar los problemas que puedan ocurrir durante su uso. Al final, en un manual se pueden encontrar los detalles de servicio técnico Ricoh en caso de que las soluciones propuestas no hayan funcionado. Actualmente gozan de éxito manuales de instrucciones en forma de animaciones interesantes o vídeo manuales que llegan al usuario mucho mejor que en forma de un folleto. Este tipo de manual ayuda a que el usuario vea el vídeo entero sin saltarse las especificaciones y las descripciones técnicas complicadas de Ricoh A251, como se suele hacer teniendo una versión en papel.

¿Por qué vale la pena leer los manuales de instrucciones?

Sobre todo es en ellos donde encontraremos las respuestas acerca de la construcción, las posibilidades del dispositivo Ricoh A251, el uso de determinados accesorios y una serie de informaciones que permiten aprovechar completamente sus funciones y comodidades.

Tras una compra exitosa de un equipo o un dispositivo, vale la pena dedicar un momento para familiarizarse con cada parte del manual Ricoh A251. Actualmente se preparan y traducen con dedicación, para que no solo sean comprensibles para los usuarios, sino que también cumplan su función básica de información y ayuda.

Índice de manuales de instrucciones

  • Página 1

    A251 Operating Instructions ®[...]

  • Página 2

    i SAFETY INFORMA TION When using your machine, the following safety precautions should be always be followed. In this manual, the following important symbols are used: R W ARNING: Ignoring this warning could cause serious injury or even death. R CA UTION: Ignoring this caution could cause injur y or damage to proper ty . Symbol R mean a situation t[...]

  • Página 3

    ii • Only connect the machine to the power source described on the inside front cover of this manual. • Avoid multi-wiring. • Do not damage, break or make any modifications to the power cord. Do not place heavy objects on it, pull it hard or bend it more than necessary . These actions could cause an electric shoc k or fire. • Do not plug or[...]

  • Página 4

    iii • Do not incinerate used toner , toner bottles or toner car tridges. T oner dust might ignite when exposed to an open flame. Dispose of the used toner cartridges according to local regulations for plastics. s[...]

  • Página 5

    iv • Keep the machine away from humidity and dust. A fire or an electric shock might occur . • Do not place the machine on an unstable or tilted surface. If it topples over , it could cause injury . • After you move the machine, fix it with the caster fixture. Other- wise, the machine might move or come down to cause a personal injury . • W[...]

  • Página 6

    v • Deliver to collection point for waste products. Do not be disposed of via domestic refuse collection. R[...]

  • Página 7

    vi[...]

  • Página 8

    vii T ABLE OF CONTENTS 1. GETTING ST ARTED .................................................. 1 HO W TO USE THIS COPY MA CHINE ............................. 1 WHERE IT IS & WHA T IT IS ........................................... 4 Copier Exterior ............................................................. 4 Operation P anel ..................[...]

  • Página 9

    viii USER TOOLS ............................................................... 3 6 Semi Synchro Cut Adjustment .................................... 3 6 WHA T YOUR SER VICE REPRESENT A TIVE CAN CHANGE ............................................................... 3 7 4. MAINT AINING YOUR COPIER .................................. 3 9 CHANGING THE T[...]

  • Página 10

    1 1. GETTING ST ARTED HO W T O USE THIS COPY MA CHINE 1 T u rn the machine switch on. When the “W ait “ indicator goes off and the ”Set Pa per” indica tor goes on, the copier enter the ready condition. 2 Select any cop y settings y ou require, such as the media type or copy density . If you have Roll Feeder (option), press the R/F Select ke[...]

  • Página 11

    2 4 Set the Original Guides (option) to match the original size mark. Set the original face up and slide it straight into the copier along the Original Guides. 5 The original comes out from the opening just under the original table ➀ . The copy is delivered from the slot on top of the copier ➁ . If you make several copies of the same original, [...]

  • Página 12

    3 SB011 Notes ❐ If you want to catch copies the back of the machine, change the copy delivery directions as shown in the figure.[...]

  • Página 13

    4 SB001 1 a 2 4 3 1 3 5 6 7 8 9 10 1 1 1 2 Copier Exterior SB002 1b Set the Manual Pocket as shown in the figure. WHERE IT IS & WHA T IT IS[...]

  • Página 14

    5 Squeeze both locks to open the unit. Open the unit to empty the used toner bottle and to remov e jammed paper. Open the cover(and the unit) to access the toner cartridge. Place your original here, face up. If you want to copy a stiff original that can’t be bent, use the Rear T able (see 6). Use the guide to keep the original going straight as y[...]

  • Página 15

    6 Pap er L ength Semi Synchro Preset / V ariable Leadin g Ed ge Co py Co unte r Function Se lect RF Select / Cut Co py Media Lighter Darke r Clea r / Stop Emerg ency Sto p Program Clear Modes/ Energy S ave r Set P aper RF Select W ait V ellum Film Cut Se lect Preset C ut Lighter Co py Set Original Energy Saver Operation Panel 12 3 4 5 6 7 8 9 1 0 1[...]

  • Página 16

    7 The Set Paper indicator on the left lights when the copier is ready to receiv e an paper . The RF Select indicator on the right lights when you select the Roll Paper . Cancels all of current settings. When you hold down this key for three seconds or more, the copier enters the Energy Saver mode allowing you to conserv e power . T o exit Ener gy S[...]

  • Página 17

    8 RECOMMENDED ORIGINALS ❐ Y ou can set originals with weight in the range 21g/m 2 , 6 lb to 157 g/m 2 , 41 lb in this copier . ❐ Feedable size is between 914×2,000 (W×L), 36”×80” (maximum width that can be fed: 960mm, 38.4”) and 210×297 (W×L), 8.5”×11” for minimum. ❐ Y ou can not use the Repeated Copying function in the follow[...]

  • Página 18

    9 Non-recommended originals ❐ The following types of originals are not recommended. • W et originals • Originals with cardboard stuck on the leading edge • Originals with clips or staples • Originals with wet ink or white-out • Carbon paper • Originals made of materials other than paper or film (thermosensitive paper, aluminium foil, [...]

  • Página 19

    10 RECOMMENDED P APER ❐ Standard paper sizes that can be used in this copier are shown belo w . ❐ When you mak e a copy on a non-standard size of paper , set the paper on the Copy Paper T able. ❐ W eight of paper suitable for this copier: 51g/m 2 , 14lb to 134g/m 2 , 36lb . ❐ Do not use the following kinds of pa per or a paper jam might occ[...]

  • Página 20

    11 ❐ If copying to natural tracing paper (all pulp, translucent paper) at a relative humidity of 35% or less. a) If the paper was left out of its package for 5 minutes or more, remove the first 700mm (28”) before copying. b) If copies come out wavy or with white spots, use vellum tracing paper instead of natural tracing paper . c) Always keep t[...]

  • Página 21

    12 T oner R W ARNING: • Do not incinerate used toner , toner bottle or toner car tridge . • T oner dust might ignite when exposed to an open flame. • Dispose of the toner bottle and the used toner cartridge according to local regulations for plastics. R Caution: • Do not eat or sw allow toner . • Keep toner(used or unused), toner bottle, [...]

  • Página 22

    13 BASIC COPYING (COPYING T O SHEETS) Use the Copy Paper T able to copy onto paper . Notes ❐ For acceptable types of original and paper see ⇒ page 8 and 10. ❐ Set one sheet of paper at a time on the Copy P aper T able. Nev er insert mor e than one sheet of paper . ❐ If the copy paper is curled, set it with curl facing downwards. ❐ When yo[...]

  • Página 23

    14 1 Pull down the Cop y Paper T able. 2 Set the Paper Guides(options) on the Copy P aper T able, and set the Original Guides (option) on the Original T able. 3 Open the guides to keep original away from the paper entrance so that the edge cannot slip into the paper entrance. SB003 SB004 SB005[...]

  • Página 24

    15 4 Make sure that the “Set Paper” indicator is lit. If it is off, press the Energy Saver key to exit Energy Saving mode. 5 If any pre vious settings remain, press the Clear Modes key . 6 Set the density , the number of copies, and other optional settings you require such as Leading Edge. 7 Set the paper along the size indication on the Copy P[...]

  • Página 25

    16 9 Set your original along the size indication on the Original T able. Or set the Original Guides (option) to match the original width. a Make sure that the “Set Original” indicator is lit. b Center your Original face up on the Original T able. Slide the original straight into the copier until the copier pulls it in. c The original comes from[...]

  • Página 26

    17 Notes ❐ Do not hold down or pull out the original during copying. Do not put pressure on the original cov er . ❐ If you do not insert the original at a certain time after you have inserted the paper, the paper will exit automatically . ❐ If you do not insert the paper at a certain time after you have inserted the original, the original wil[...]

  • Página 27

    18 When you copy the following originals, set them in the Rear T able. • Thick originals (0.19mm, 35 µ ∼ 1mm). • Originals which cannot be folded. • Originals less than 297mm (12”) in width and more than 1200mm (47”) in length. Notes ❐ Y ou cannot use the following function using the Rear T able. — Repeated Coping — Semi Synchro [...]

  • Página 28

    19 COPYING ONT O R OLL P APER (OPTION) T o make a copy using the Roll Feeder option, you do not need to set paper on the Copy Paper T ab le; the paper will be fed to the copier from the Roll Feeder . Y ou can copy onto roll pa per using the following techniques: — Semi Synchro cutting — Preset cutting — V aria ble cutting Notes ❐ If unused [...]

  • Página 29

    20 This feature lets you cut the roll paper manually to a length that approximates to that of the original. This saves you having to measure and enter the length of every original. Notes ❐ Semi Synchro Cut can handle the cut length in the range 410 ~ 2000mm, 16.5” ~ 80.0”. ❐ If you set the number of copies, Semi Synchro Cut can handle autom[...]

  • Página 30

    21 6 Center your original face up on the Original T able. Slide the original straight into the copier until the copier pulls it in. 7 Just as the trailing edge of the original passes the horizontal line of the Semi-auto synchro cut mark, press the Cut ke y . Notes ❐ T o cancel copying, press the Clear/Stop k ey . The copier finishes the operation[...]

  • Página 31

    22 This function cuts roll paper to a selected length. The paper is cut to this length regardless of the original size. Notes ❐ By the default Preset Cut length is as follows. For the change of the Preset Cut length pattern, please contact your service representatives. Metric V ersion: 1189mm, 841mm, 594mm, 420mm, 297mm Inch V ersion: 48.0”, 42[...]

  • Página 32

    23 This function cuts roll paper in a length you specify . Notes ❐ The variable cut can handle the cut length from 245 to 2,000mm, 9.6” to78.7”. 1 Press the Preset Cut ke y . The “Preset/V ariable” indicator lights up and the “Paper Length” display shows the default Preset Cut length. (1189mm, or 48.0”). 2 Press the Preset Cut key t[...]

  • Página 33

    24 USING THE R OLL CUTTING RAIL (OPTION) The ROLL Cutting Rail allows you to buy paper in rolls and cut your own sheets. 1 Pull a bit of paper out and insert it between the rail and the double rod. 2 Pull the length of paper you want. 3 With one hand, hold the paper firmly against the Original T able.[...]

  • Página 34

    25 4 With your other hand, insert the blade of a paper knife between the two rods and slide across the length of the rail. 5 Make your copy as shown on page14. Make sure the curl of the paper faces down .[...]

  • Página 35

    27 COPYING ONT O O THER MEDIA T o copy onto vellum (translucent or tracing paper) or f ilm, select the Copy Media function to match the paper type (see below). This list is not complete. If you are not sure of what type of paper you have, check the label on the paper package. 1 Press the Copy Media k ey to turn on the “V el- lum” or “Film” [...]

  • Página 36

    28 1 Press the Copy Media key to turn on the “V ellum” or “Film” indicator that you want. 2 Hold down the Copy Media key for at least 3 seconds. The “Lighter Copy” display will show the current fusing temperature. The unlit indicator shows the current temperature. 3 Press the Lighter key to decrease the tempera- ture, and press the Dark[...]

  • Página 37

    29 ADJUSTING COPY IMA GE DENSITY T o make copies darker or lighter , change the density setting. There are 14 density levels: the standard density level, three darker level, and 10 lighter levels. Set the density with the Lighter and Darker keys under the density indicator . Notes ❐ The indicator shows se ven lev els at a time. W hen you start fr[...]

  • Página 38

    30 MAKING SEVERAL COPIES OF THE SAME ORIGINAL Repeated copying means making two or more copies of a original. T o make more than one copy of the same original, you have to reload the original after eac h copy . If you’ re not using the Roll Feeder (option), you also hav e to set the copy paper for each copy . Notes ❐ with this feature, the imag[...]

  • Página 39

    31 SETTING A LEADING EDGE MARGIN Y ou can set a margin at the leading edge of the cop y . Notes ❐ Y ou can set up to ±99mm, ±4.0” margin in 1mm, 0.1” steps at the leading edge. ❐ The copy image is shifted to the trailing edge, when you make a copy using the Copy paper table, or in the Preset Cut mode, V ariable Cut mode. ❐ In the Semi S[...]

  • Página 40

    32 P AR TIAL COPYING The Partial Copy function copies only a part of an original. Y ou need to enter start and end points in the original feed direction. Notes ❐ Y ou cannot use the Partial Copying function using the Rear T able. ❐ Y ou cannot use the Partial Cop ying function f or originals shorter than 150mm. ❐ Y ou can use the Partial Cop [...]

  • Página 41

    33 2 Slide the paper straight into the copier until it stops, or press the RF Select key to turn on the “RF Select “ indicator . 3 Set the original. 4 Press the Function Select key when the lead- ing edge of the area to be copied comes to the position where it is covered with the original table cove r . The “P” will stay on, not blinking. T[...]

  • Página 42

    34 PROGRAMMING SETTING Y OU OF TEN USE There are two ways of programming settings you often use. A ) Store the settings in the Program key . When you press this ke y , the settings will be restored instantly . B) Change the default settings to those you use most frequently . Whenever you tur n on the machine or press the Clear Modes ke y , these se[...]

  • Página 43

    35 1 Press the Program key before copying. 2 Enter the number of copies required with the plus and minus ke y . 3 Make a copy . 1 T urn the main switc h off. 2 Hold do wn the Emergency Stop ke y , then turn the copier back on. The jam and service indicators will blink. 3 Input the settings you want. 4 T urn the main switc h off. The next time you t[...]

  • Página 44

    36 USER T OOLS Access the User T ools to make the follo wing adjustments: A1) Not in use A2) Semi Synchro Cut Adjustment; Allows you to adjust the cut length. –25 ~ +25mm (–1.0” ~ –1.0”) (by 1mm, or 0.1") W ithout the Roll Feeder , A2) is not in use. 1 Hold down the Program key for at least 3 seconds. “ A.1” blinks on the “Copy[...]

  • Página 45

    37 WHA T Y OUR SER VICE REPRESENT A TIVE CAN CHANGE Y our service representative can adjust some of your copier’ s features. Here’ s a list of changes the service representative can make for you. ❐ Copy media default : The copy media setting can be adjusted to match the kind of paper you use. ❐ Count up and count down : The copy counter can[...]

  • Página 46

    38 ❐ Paper length count up/down, Paper length up/down speed, and Paper size pattern : When you press the preset length key , the copier scrolls through a selection of preset paper sizes. The copier can scroll through the preset lengths forward or backward, and at different speeds. There are man y sets of sizes from which to choose. Ask your servi[...]

  • Página 47

    39 CHANGING THE T ONER BO TTLE When “FULL” is displayed, it is time to changing the T oner Bottle. R W ARNING: R Caution: Do not eat or sw allow toner . Keep toner(used or unused), toner bottle, and toner cartridge out of reach of children. R Caution: This machine has been tested for saf ety using this supplier’s parts and consumables. We rec[...]

  • Página 48

    40 2 Open the door on the right side of the copier . 3 Carefully remove the plastic bottle and put the used toner in a vinyl bag. Dispose it according to local regulations for plastics. 4 Place the bottle in the copier . 5 Close the door . SM012 SM013 SM014 SM015[...]

  • Página 49

    41 6 Close the upper unit. 7 If needed, turn the copier back on, and and press the Clear Modes key to clear the FULL message. SB023[...]

  • Página 50

    42 ADDING T ONER When D is displayed, it is time to supply toner . When the indicator starts blinking, you can still copy about 53 feet of paper (16 m, 27 8½”×11” size copies). When the indicator stays on, you can’t copy until a new cartridge is put in. R W ARNING: • Do not incinerate used toner , toner bottle or toner car tridge . T oner[...]

  • Página 51

    43 2 Open the toner cartridge cov er . 3 T urn the old cartridge tow ards you. Then, while pressing the cartridge to the right, lift the left end and remove the cartridge. 4 Put the old toner cartridge in a vinyl bag and dispose it according to local regurations for plastics. 5 Shake the new toner cartridge lightly 5 to 5 times to remove lumps. 6 I[...]

  • Página 52

    44 7 T ake the right edge of the seal and slowl y remove it. 8 Push the toner cartridge all the way to the left. Then turn the toner cartridge all the way in, as shown. 9 Close the toner cartridge cover and the Origi- nal T able. The copier will need a few moments to warm up before it is ready to copy . SB029 SB030 SB031[...]

  • Página 53

    45 LO ADING A R OLL OF P APER When C is displayed, it is time to install a ne w roll of paper . R CA UTION: • Rolls of paper can be heavy , so y ou should be careful when loading one. Don’t strain yourself. Ask for help if you think you need it. 1 Open the top and bottom covers of the Roll Feeder . 2 If there is paper left, slide the blade from[...]

  • Página 54

    46 4 Flip the two latches on each side of the paper spool. 5 Remove the spool. 6 Press and hold the lock on the spool and pull the spool out of the roll. Throw the old roll away . 7 Press and hold the lock on the spool and insert the spool into a new roll. SM030 SM031 SM032 SM029[...]

  • Página 55

    47 8 While holding the lock down, align the paper roll with the size marks on the spool. 9 Load the spool back in the Roll Feeder so that the paper comes off the roll from the front, not from the rear , as sho wn belo w . a Make sure the spool is pushed all the way in the grooves and flip the two latches back in place. b Pull the leading edge of th[...]

  • Página 56

    48 c T u rn the wheel on the right side to bring the paper further in. d Lower the top unit of the Roll Feeder . a) Hold the two handles. b) Squeeze and hold the lock on the left c) Lower the unit just a bit. d) Hold on to the unit, but let go of the lock. e) Lower the unit until it locks in place. e Spin the paper roll a bit to tighten the paper .[...]

  • Página 57

    49 LO ADING A NEW ROLL (ONT O P APER CUTTING RAIL) 1 Lift the rail. 2 Remove the spool from its support. 3 Remove one of the end caps and slide the old roll off the spool. 4 Slide the new roll on the spool and put the cap over the end of the roll. SB045 SB046 SB047 SB048[...]

  • Página 58

    50 5 Place the spool on the holder so that the paper rolls off the front. Push it all the way in. 6 Lower the rail. SB050 SB021[...]

  • Página 59

    51 If you have problems with your copier, consult the following pages. If a service indicator lights up, read the section below; if the original or the copy is stuck in the copier; see page 52; if the copier won’t start, or if copies don’t look right, see page 58. If one of the service indicators shown appears on the operation panel, turn to th[...]

  • Página 60

    52 If Jams Occur V ery gently pull the original out of the f eed-in slot. Be careful not to tear it. R CA UTION: • If the original sticks in the machine, or if you don’t think you can remove it without tearing, remove the original from the exit instead. See below . 1 Lift the Original T able. 2 V ery gently pull the original out of the f eed- o[...]

  • Página 61

    53 3 Close the original table. Press firmly on both sides until it clicks into place. 1 Squeeze the locks on each side of the copier and lift the unit. 2 Pull out the copy paper . Do not lea ve an y scraps of paper in the copier . 3 Close the unit. Press firmly on both sides until it clicks into place. If sheet paper is jammed in the feed-in slot S[...]

  • Página 62

    54 R CA UTION: • The fusing unit can be very hot. Do not touch any parts under the fusing cov er . If necessar y , wait until the fusing unit has cooled down. 1 Squeeze the locks on each side of the copier and lift the moddle unit between the Original T able and the Copy Paper T ab le. 2 Open the fusing unit cov er . 3 Slowly pull the paper out. [...]

  • Página 63

    55 4 Close the unit and all covers. Press firmly on both sides until it clicks into place. If rill paper jams anywhere in the machine, you still might need to check everywhere to remove the entire length of paper . R CA UTION: • The fusing unit can be very hot. Do not touch any parts under the fusing cov er . If necessar y , wait until the fusing[...]

  • Página 64

    56 4 Close the roll feeder top cov er . If your were able to remove all the paper, stop here. 5 Squeeze the locks on each side of the copier and lift the unit. 6 Open the fusing unit cov er . 7 Slowly pull the paper out. If there are scraps left inside, open the inner cover, wait for the copier to cool, and remove the scraps. SB038 SB039 SB036 SB05[...]

  • Página 65

    57 8 Close the unit and all covers. Press firmly on both sides until it clicks into place. SB023[...]

  • Página 66

    58 O THERS If a puzzling or recurring problem occurs, check the following before calling a service representative. It’s also a good idea to check the Do’s and Don’ts section on page 59 to make sure the paper and originals match what the copier can handle. ❐ Is the main switch on? ❐ Is the cord plugged in? ❐ Did a breaker or a fuse blow [...]

  • Página 67

    59 ❐ Try setting your copy paper sideways. ❐ If long runny creases appear on copies, try setting your copy paper sideways, or try changing the copy media setting. ❐ If creases appear on copies made to transparent film, try setting your film sheets sideways. ❐ Try setting your copy paper with the other side facing up. ❐ Make sure your copy[...]

  • Página 68

    60 THINGS T O DO EVER Y D A Y you should clean the copy and original tables with a damp cloth, then wipe them with a dry cloth. Clean the exposure glass and the Original Drive Roller with a damp cloth, then wipe it with a dry cloth. Clean the platen plate with a damp cloth, then wipe it with a dry cloth. Clean the exposure glass & the platen pl[...]

  • Página 69

    61 DO’S & DON’TS R CA UTION: • When you move the machine, unplug the power cord from the wall outlet to avoid fire or electric shock. • When the machine will not be used for a long time, unplug the power cord. ❐ Do not touch areas on or around the fusing unit. These areas get hot. ❐ After making copies continuously , you may feel th[...]

  • Página 70

    62 WHERE T O PUT Y OUR COPIER Y our copier needs to be installed by a qualified technician. If you need to transpor t your copier to a distant location, call your service center before the move. Y ou can of course mov e your copier ar ound your off ice without calling the ser vice center . If you do, remember that the temperature, humidity , and cl[...]

  • Página 71

    63 ❐ Locations exposed to direct sunlight or strong light (more than 1500 lux); ❐ Dusty areas. ❐ Areas with corrosive gasses. ❐ Altitudes of over 6500 feet (2000 m) above sea level; ❐ Areas prone to strong vibrations. ❐ Locations directly exposed to cool air from an air conditioner or heat from a nearby heater . (Sudden temperature chan[...]

  • Página 72

    64 ❐ Connect the copier to a power source meeting the specifications given on the inside front cover of this manual. ❐ Do not set anything on the power cord. ❐ V oltage must not fluctuate more than 10%. ❐ Make sure the copier is grounded. ❐ Make sure the plug is firmly inserted into the power outlet. ❐ Make sure the power outlet is clos[...]

  • Página 73

    65 COPIER Configuration Desktop Process Dry electrostatic transfer system Scanning Original moving over a fixed fiber optics array Originals Sheet Original Reference Position Center Original Size Maximum: 914 (W) × 2,000 (L) (36” × 80”) Minimum: A4 (210 (W) × 297 (L)) (8.5” × 11”) Copy Size Maximum: 914 (W) × 2,000 (L) (36” × 80”)[...]

  • Página 74

    66 OPTIONS • Roll feeder Number of loaded paper rolls 1 roll Acceptable Roll Size Maximum: 914mm (36”) Minimum: 210mm (8.5”) Roll Diameter Within 170mm (6.7”) Dimension(W × D × H) 1,080 × 475 × 295mm (42.5 × 18.7 × 11.6”) W eight 33kg (73lb) • Side Guides •T a b l e • Roll Cutting Rail[...]

  • Página 75

    67 INDEX A altitude, 62 B background, dirty , 58 bending originals avoiding, 18 blanking margins, 31 bleeding image, 31 C clearance, 64 copy density , 29 copy media, 27 copying, 13 copying do’ s & don’ts, 13, 61 crooking image (skewed), 58 D daily maintenance, 60 dark copies, making, 29 dark copies, problem, 58 default settings, 35 density [...]

  • Página 76

    68 S selected area, copying a, 32 semi synchro cutting, 20 service indicators, 51 settings, default, 35 skewed image, 58 stiff originals, 18 T temperature, 62 temperature, fusing, 28 thick and thin paper, 10 toner bottle, 12, 39 toner, adding, 42 toner , do’ s & don’t, 12 toner, used, 39 troubleshooting, 51[...]

  • Página 77

    A252 Operating Instructions ®[...]

  • Página 78

    i SAFETY INFORMA TION When using your machine, the following safety precautions should be always be followed. In this manual, the following important symbols are used: R W ARNING: Ignoring this warning could cause serious injury or even death. R CA UTION: Ignoring this caution could cause injur y or damage to proper ty . Symbol R mean a situation t[...]

  • Página 79

    ii • Only connect the machine to the power source described on the inside front cover of this manual. • Avoid multi-wiring. • Do not damage, break or make any modifications to the power cord. Do not place heavy objects on it, pull it hard or bend it more than necessary . These actions could cause an electric shoc k or fire. • Do not plug or[...]

  • Página 80

    iii • Do not incinerate used toner , toner bottles or toner car tridges. T oner dust might ignite when exposed to an open flame. Dispose of the used toner cartridges according to local regulations for plastics. s[...]

  • Página 81

    iv • Keep the machine away from humidity and dust. A fire or an electric shock might occur . • Do not place the machine on an unstable or tilted surface. If it topples over , it could cause injury . • After you move the machine, fix it with the caster fixture. Other- wise, the machine might move or come down to cause a personal injury . • W[...]

  • Página 82

    v • Deliver to collection point for waste products. Do not be disposed of via domestic refuse collection. R[...]

  • Página 83

    vi[...]

  • Página 84

    vii T ABLE OF CONTENTS 1. GETTING ST ARTED .................................................. 1 HO W TO USE THIS COPY MA CHINE ............................. 1 WHERE IT IS & WHA T IT IS ........................................... 4 Copier Exterior ............................................................. 4 Operation P anel ..................[...]

  • Página 85

    viii 4. MAINT AINING YOUR COPIER .................................. 3 9 CHANGING THE TONER BO TTLE ................................. 3 9 ADDING TONER ........................................................... 4 2 LOADING A ROLL PAPER ............................................ 4 5 5 . TROUBLESHOO TING .............................................[...]

  • Página 86

    1 1. GETTING ST ARTED HO W T O USE THIS COPY MA CHINE 1 T u rn the machine switch on. When the “W ait “ indicator goes off and the ”Set Original” indicator goes on, the copier enters the ready condition. 2 Select any cop y settings y ou require, such as the media type or copy density . If you have Roll Feeder (option), press the Bypass Sele[...]

  • Página 87

    2 4 Set the Original Guide to match the original size mark. Set the original face down and slide it straight into the copier along the Original Guide. 5 First, the original is fed through to the Rear T able. 6 When the original is being sent back, the machine reads the original and starts copying. With Repeated Copying, the original is repeatedly f[...]

  • Página 88

    3 7 Copies are delivered at the rear of the machine. ❐ Set the Manual Pocket as shown in the figure. PM007 SM062[...]

  • Página 89

    4 WHERE IT IS & WHA T IT IS 1 a 2 3 4 5 6 7 8 9 10 1 1 1 2 Copier Exterior SM001 SM009[...]

  • Página 90

    5 1a. & 1b. Locks Squeeze both locks to open the unit. Open the unit to empty the used toner bottle and to remov e jammed paper . 2. Front Cover Open the cover(and the unit) to access the toner cartridge. 3. Original Guide Use the guide to keep the original going straight as you feed the original into the copier . 4. Original T able Place your [...]

  • Página 91

    6 Pap er Leng th Synchro Preset / V ariable Leadin g Edg e T railing Edge Co py Counter Function Se lect Bypass Select / Ro ll P aper Cut Copy Media Lighter Darke r Clea r / Stop Emerg ency Stop Program Clear Modes/ Energy S aver W ait V ellum Film Cut Se lect Preset C ut Lighter Co py Set Original Energy Saver 1 2 3 4 56 78 12 13 14 15 16 17 18 1.[...]

  • Página 92

    7 9. Set Paper and RF The Set Paper indicator on the left lights when you select Bypass. Select indicators The RF Select indicator on the right lights when you select Roll Paper . 10 . Clear Modes/Energy Cancels all current settings. When you hold down Saver key this key for three seconds or more, the copier enters Energy Sa ver mode allo wing you [...]

  • Página 93

    8 RECOMMENDED ORIGINALS ❐ Y ou can set originals with weight in the range 21g/m 2 , 6 lb to 157 g/m 2 , 41 lb in this copier . ❐ Feedable size is between 914×2,000 (W×L), 36”×80” (maximum width that can be fed: 960mm, 37.8”) and 210×297 (W×L), 8.3”×11.7” for minimum. ❐ Y ou can not use the Repeated Copying function in the foll[...]

  • Página 94

    9 Non-recommended originals ❐ The following types of originals are not recommended. • W et originals • Originals with cardboard stuck on the leading edge • Originals with clips or staples • Originals with wet ink or white-out • Carbon paper • Originals made of materials other than paper or film (thermosensitive paper, aluminium foil, [...]

  • Página 95

    10 RECOMMENDED P APER ❐ Standard paper sizes that can be used in this copier are shown belo w . ❐ When you make a copy on a non-standard size of paper, set the paper in the Bypass. ❐ W eight of paper suitable for this copier: 51g/m 2 , 14lb to 134g/m 2 , 36lb . ❐ Do not use the following kinds of pa per or a paper jam might occur . • Bent[...]

  • Página 96

    11 ❐ If copying to natural tracing paper (all pulp, translucent paper) at a relative humidity of 35% or less. a) If the paper was left out of its package for 5 minutes or more, remove the first 700mm (28”) before copying. b) If copies come out wavy or with white spots, use vellum tracing paper instead of natural tracing paper . c) Always keep t[...]

  • Página 97

    12 T ONER R W ARNING: • Do not incinerate used toner , toner bottle or toner car tridge . • T oner dust might ignite when exposed to an open flame. • Dispose of the toner bottle and the used toner cartridge according to local regulations for plastics. R Caution: • Do not eat or sw allow toner . • Keep toner(used or unused), toner bottle, [...]

  • Página 98

    13 B ASIC COPYING (COPYING T O SHEETS) Use the Bypass T able to copy onto sheets of paper . Notes ❐ For acceptable types of original and paper, see ⇒ page 8 and 10. ❐ Set one sheet of paper at a time on the Copy T able. Ne ver insert more than one sheet of paper . ❐ If the copy paper is curled, set it with the curl facing downwards. ❐ Whe[...]

  • Página 99

    14 1 Pull down the Bypass T able. 2 Adjust the Paper Guides (options) on the Bypass T able to ma tch the size of your copy paper . 3 Open the guides to keep the original away from the paper entrance so that the edge can- not slip into the paper entrance. SM002 SM003 SB007[...]

  • Página 100

    15 4 Make sure that the “Set Paper” indicator is lit. If it is off, press the Energy Saver key to exit Energy Saving mode. 5 If any pre vious settings remain, press the Clear Modes key . 6 Set the density , the number of copies, and other optional settings you requires such as T railing Edge. 7 Set the paper along the size indication on the Byp[...]

  • Página 101

    16 9 Make sure that the “Set Original” indicator is lit. a Center your original face down on the Origi- nal T able. Slide the original straight into the copier until the copier pulls it in. b First, the original is fed through to the Rear Ta b l e . c When the original is being sent back, the ma- chine scans the original and starts copying. SM0[...]

  • Página 102

    17 d The copy is deli vered at the back of the copier . e After copying has finished, hold the original with one hand, press the Clear/Stop key , and remove the original. Notes ❐ Do not hold down or pull out the original during copying. Do not put pressure on the original cov er . ❐ If you do not insert the original a certain time after you hav[...]

  • Página 103

    18 Set thick originals (0.19mm, 35µ~1mm) or originals less than 297mm in width and more than 1200mm in length, on the Rear T able. Notes ❐ Y ou cannot use the following functions using the Rear T able. — Repeated Copying — Synchro cutting function with roll paper — Partial Copying 1 Choose any copy setting you require. 2 For manual cop yin[...]

  • Página 104

    19 CA UTION : If during copying your original gets stuck in the copier, press the Emergency Stop ke y . If y ou stop the oper a tion b y pr essing this k ey , r emo v e both the or ig inal and pa per . COPYING ONT O R OLL P APER (OPTION) T o make a copy using the Roll Feeder option, you do not need to set paper on the copy table; the paper will be [...]

  • Página 105

    20 Pape r Lengt h Synchro Preset / V ariable Leading E dge T railing Edge Copy C ounter Function Se lect Bypass Select / Roll P aper Cut Copy Media Lighter Darker Clear / Stop Emerge ncy Stop Program Clear Modes/ Energy Sa ver Wait V ellum Film Cut Select Preset Cut Lighter Copy Set Original Energy Saver This function cuts roll paper automatically [...]

  • Página 106

    21 6 Center your original face down on the Origi- nal T able. Slide the original straight into the copier until the copier pulls it in. 7 After copying has finished, hold the original with one hand, press the Clear/Stop k ey , then remove the original. Notes ❐ T o cancel copying, press the Clear/Stop k ey . The copier finishes the operation in pr[...]

  • Página 107

    22 Pape r Lengt h Synchro Preset / V ariable Leading E dge T railing Edge Copy C ounter Function Se lect Bypass Select / Roll P aper Cut Copy Media Lighter Darker Clear / Stop Emerge ncy Stop Program Clear Modes/ Energy Sa ver Wait V ellum Film Cut Select Preset Cut Lighter Copy Set Original Energy Saver This function cuts roll paper to a selected [...]

  • Página 108

    23 Pape r Lengt h Synchro Preset / V ariable Leading E dge T railing Edge Copy C ounter Function Se lect Bypass Select / Roll P aper Cut Copy Media Lighter Darker Clear / Stop Emerge ncy Stop Program Clear Modes/ Energy Sa ver Wait V ellum Film Cut Select Preset Cut Lighter Copy Set Original Energy Saver This function cuts roll paper to a length yo[...]

  • Página 109

    24 24[...]

  • Página 110

    25 COPYING ONT O O THER MEDIA T o copy onto vellum (translucent or tracing paper) or f ilm, select the Copy Media function to match the paper type (see below). This list is not complete. If you are not sure of what type of paper you have, check the label on the paper package. 1 Press the Copy Media key to turn on the “V ellum” or “Film” ind[...]

  • Página 111

    26 1 Press the Copy Media key to turn on the “V ellum” or “Film” indicator that you want. 2 Hold down the Copy Media key for at least 3 seconds. The “Lighter Copy” display will show the current fusing temperature. The unlit indicator shows the current temperature. 3 Press the Lighter key to decrease the tempera- ture, and press the Dark[...]

  • Página 112

    27 ADJUSTING COPY IMA GE DENSITY T o make copies darker or lighter , change the density setting. There are 14 density lev els: the standard density level, three darker level, and 10 lighter levels. Set the density with the Lighter and Darker ke ys under the density indicator . Notes ❐ The indicator shows se ven lev els at a time. When you start f[...]

  • Página 113

    28 SETTING THE NUMBER OF COPIES (REPEA TED COPYING) Repeated copying means making two or more copies of a original. This function allows you to make up to 10 copies. Notes ❐ with this feature, the image might be copied at a slant. Whether this happens depends on the original size, type, and condition (e.g ., curled, wa vy , originals). In such a [...]

  • Página 114

    29 SETTING A LEADING/TRAILING EDGE MARGIN Y ou can set a mar gin on the leading or trailing edge of the copy when you use Roll Feeder (option) in the Synchro Cut mode. When using the Bypass T able, and Preset/V ariable Cut Mode you can only set the trailing edge margin. Notes ❐ Y ou can set a margin of ±99mm, ±4.0” in 1mm, 0.1” steps on eit[...]

  • Página 115

    30 2 Press the + key and - key to specify a edge margin. T o zero the v alue, press the Clear/Stop key . 3 If you want to set both margins, press the Function Select key and specify the other mar- gin. 4 Using the Original T able, insert the original leading edge first. Using the Rear T able. insert the or iginal trail- ing edge first. SM004 Pape r[...]

  • Página 116

    31 P ARTIAL COPYING The Partial Copy function copies only a part of an original. Y ou need to enter start and end points in the original feed direction. Notes ❐ Y ou cannot use the Pa rtial Copying function using the Rear T a ble. ❐ Y ou cannot use the Partial Copying function for originals shorter than 255 mm. ❐ If you set the start point wi[...]

  • Página 117

    32 2 Slide the paper straight into the copier until it stops, or press the RF select key to turn on the “RF Select” indicator . 3 Set the original. 4 Press the Function Select key when the lead- ing edge of the area to be copied comes to the position where it is covered with the original table cov er . The “P” will stay on, not blinking. Th[...]

  • Página 118

    33 PROGRAMMING SETTING Y OU OF TEN USE There are two ways of programming settings you often use. A ) Store the settings in the Program key . When you press this ke y , the settings will be restored instantly . B) Change the default settings to those you use most frequently . Whenever y ou turn on the machine or press the Clear Modes ke y , these se[...]

  • Página 119

    34 1 T urn the main switc h of f. 2 Hold do wn the Emergency Stop k ey , then turn the copier back on. The jam and service indicators will blink. 3 Input the settings you want. 4 T urn the main switc h of f. The next time you turn the copier on or press the Clear Modes ke y , the settings you programmed in step 3 will take effect. B) Changing The D[...]

  • Página 120

    35 USER T OOLS Access the User T ools to mak e the f ollowing adjustments: A.1) Magnification Adjustment; Allows you to adjust the degree of ve rtical magnification of copied image –1.0 ~ +1.0% (by 0.05% Initial V alue: 0) A.2) Cut Length; Allows y ou to adjust the cut length. – 25 ~+25mm (–1.0” ~ –1.0”) (by 1mm, or 0.1") 1 Hold do[...]

  • Página 121

    36 WHA T Y OUR SER VICE REPRESENT A TIVE CAN CHANGE Y our service representativ e can adjust some of your copier’ s fea tures. Here’ s a list of changes the service representative can make for you. ❐ Copy media default: The copy media setting can be adjusted to match the kind of paper you use. ❐ Count up and count down: The copy counter can[...]

  • Página 122

    37 ❐ Paper length count up/down, Paper length up/down speed, and Paper size pattern: When you press the preset length key , the copier scrolls through a selection of preset paper sizes. The copier can scroll through the preset lengths forward or backward, and at different speeds. There are many sets of sizes from which to choose. Ask your service[...]

  • Página 123

    38[...]

  • Página 124

    39 CHANGING THE T ONER BO TTLE When “FULL” is displayed, it is time to changing the T oner Bottle. R W ARNING: R Caution: Do not eat or sw allow toner . Keep toner(used or unused), toner bottle, and toner cartridge out of reach of children. R Caution: This machine has been tested for saf ety using this supplier’s parts and consumables. We rec[...]

  • Página 125

    40 2 Open the door on the right side of the copier . 3 Carefully remove the plastic bottle. Put the the used toner in the vinyl bag and dispose of it according to local regulations for plastics. 4 Place the bottle in the copier again. 5 Close the door . 6 Close the upper unit. SM012 SM013 SM014 SM015[...]

  • Página 126

    41 7 If needed, turn the copier back on, and press the Clear Modes key to clear the FULL mes- sage. SM016[...]

  • Página 127

    42 ADDING T ONER When D is displayed, it is time to supply toner . When the indicator starts blinking, you can still copy about 53 feet of paper (16 m, 27 8½”×11” size copies). When the indicator stays on, you can’t copy until a new cartridge is put in. R W ARNING: • Do not incinerate used toner , toner bottle or toner car tridge . T oner[...]

  • Página 128

    43 2 Open the toner cartridge cov er . 3 T urn the old cartridge tow ards you. Then, while pressing the cartridge to the right, lift the left end and remove the cartridge. 4 Put the old toner cartridge in a vinyl bag and dispose it according to local regulations for plastics. 5 Shake the new toner cartridge lightly 5 to 5 times to remove lumps. 6 I[...]

  • Página 129

    44 7 T ake the right edge of the seal and slowl y remove it. 8 Push the toner cartridge all the way to the left. Then turn the toner cartridge all the way in, as shown. 9 Close the toner cartridge cover and the Original Ta b l e . The copier will need a few moments to warm up before it is ready to copy . SM023 SM025 SM024[...]

  • Página 130

    45 LO ADING A R OLL OF P APER When is displayed, it is time to install a ne w roll of paper . R CA UTION: • Rolls of paper can be heavy , so y ou should be careful when loading one. Don’t strain yourself. Ask for help if you think you need it. 1 Open the top and bottom covers of the Roll Feeder . 2 If there is paper left, slide the blade from s[...]

  • Página 131

    46 4 Flip the two latches on each side of the paper spool. 5 Remove the spool. 6 Press and hold the lock on the spool and pull the spool out of the roll. Throw the old roll away . 7 Press and hold the lock on the spool and insert the spool into a new roll. SM030 SM031 SM032 SM029[...]

  • Página 132

    47 8 While holding the lock down, align the paper roll with the size marks on the spool. 9 Load the spool back in the Roll Feeder so that the paper comes off the roll from the front, not from the rear , as sho wn belo w . a Make sure the spool is pushed all the way in the grooves and flip the two latches back in place. b Pull the leading edge of th[...]

  • Página 133

    48 c T u rn the wheel on the right side to bring the paper further in. d Lower the top unit of the Roll Feeder . a) Hold the two handles. b) Squeeze and hold the lock on the left c) Lower the unit just a bit. d) Hold on to the unit, but let go of the lock. e) Lower the unit until it locks in place. e Spin the paper roll a bit to tighten the paper .[...]

  • Página 134

    49 If you have problems with your copier, consult the following pages. If a service indicator lights up, read the section below; if the original or the copy is stuck in the copier; see page 50; if the copier won’t start, or if copies don’t look right, see page 56. If one of the service indicators shown appears on the operation panel, turn to th[...]

  • Página 135

    50 IF JAMS OCCUR Notes ❐ If the paper or original gets stuck in the copier , remove both the original and paper . V ery gently pull the original out of the f eed-in slot. Be careful not to tear it. R CA UTION: • If the original sticks in the machine, or if you don’t think you can remove it without tearing, remove the original from the exit in[...]

  • Página 136

    51 3 Close the original table. Press firmly on both sides until it clicks into place. Notes ❐ If the paper or original gets stuck in the copier , remove both the original and paper . 1 Squeeze the locks on each side of the copier and lift the unit. 2 Pull out the copy paper . Do not lea ve an y scraps of paper in the copier . 3 Close the unit. Pr[...]

  • Página 137

    52 R CA UTION: • The fusing unit can be very hot. Do not touch any parts under the fusing cov er . If necessar y , wait until the fusing unit has cooled down. Notes ❐ If the paper or original gets stuck in the copier, remove both the original and paper . 1 Squeeze the locks on each side of the copier and lift the moddle unit between the Origina[...]

  • Página 138

    53 4 Close the unit and all covers. Press firmly on both sides until it clicks into place. If rill paper jams anywhere in the machine, you still might need to check everywhere to remove the entire length of paper . R CA UTION: • The fusing unit can be very hot. Do not touch any parts under the fusing cov er . If necessar y , wait until the fusing[...]

  • Página 139

    54 4 Close the roll feeder top cov er . If your were able to remove all the paper, stop here. 5 Squeeze the locks on each side of the copier and lift the unit. 6 Open the fusing unit cov er . 7 Slowly pull the paper out. If there are scraps left inside, open the inner cover, wait for the copier to cool, and remove the scraps. SM046 SM054 SM049 SM04[...]

  • Página 140

    55 8 Close the unit and all covers. Press firmly on both sides until it clicks into place. SM050[...]

  • Página 141

    56 O THERS If a puzzling or recurring problem occurs, check the following before calling a service representative. It’s also a good idea to check the Do’s and Don’ts section on page 59 to make sure the paper and originals match what the copier can handle. ❐ Is the main switch on? ❐ Is the cord plugged in? ❐ Did a breaker or a fuse blow [...]

  • Página 142

    57 ❐ Try setting your copy paper sideways. ❐ If long runny creases appear on copies, try setting your copy paper sideways, or try changing the copy media setting. ❐ If creases appear on copies made to transparent film, try setting your film sheets sideways. ❐ Try setting your copy paper with the other side facing up. ❐ Make sure your copy[...]

  • Página 143

    58 THINGS T O DO EVER Y D A Y you should clean the copy and original tables with a damp cloth, then wipe them with a dry cloth. ❐ Clean the exposure glass and the Original Drive Roller with a damp cloth, then wipe it with a dry cloth. ❐ Clean the platen plate with a damp cloth, then wipe it with a dry cloth. Clean the exposure glass & the p[...]

  • Página 144

    59 DO’S & DON’TS R CA UTION: • When you move the machine, unplug the power cord from the wall outlet to avoid fire or electric shock. • When the machine will not be used for a long time, unplug the power cord. ❐ Do not touch areas on or around the fusing unit. These areas get hot. ❐ After making copies continuously , you may feel th[...]

  • Página 145

    60 WHERE T O PUT Y OUR COPIER Y our copier needs to be installed by a qualified technician. If you need to transpor t your copier to a distant location, call your service center before the move. Y ou can of course mov e your copier ar ound your off ice without calling the ser vice center . If you do, remember that the temperature, humidity , and cl[...]

  • Página 146

    61 ❐ Locations exposed to direct sunlight or strong light (more than 1500 lux); ❐ Dusty areas. ❐ Areas with corrosive gasses. ❐ Altitudes of over 6500 feet (2000 m) above sea level; ❐ Areas prone to strong vibrations. ❐ Locations directly exposed to cool air from an air conditioner or heat from a nearby heater . (Sudden temperature chan[...]

  • Página 147

    62 ❐ Connect the copier to a power source meeting the specifications given on the inside front cover of this manual. ❐ Do not set anything on the power cord. ❐ V oltage must not fluctuate more than 10%. ❐ Make sure the copier is grounded. ❐ Make sure the plug is firmly inserted into the power outlet. ❐ Make sure the power outlet is clos[...]

  • Página 148

    63 COPIER Configuration Desktop Process Dry electrostatic transfer system Scanning Original moving over a fixed fiber optics array Originals Sheet Original Reference Position Center Original Size Maximum: 914 (W) × 2,000 (L) (36” × 80”) Minimum: A4 (210 (W) × 297 (L)) (8.5” × 11”) Copy Size Maximum: 914 (W) × 2,000 (L) (36” × 80”)[...]

  • Página 149

    64 OPTIONS • Roll feeder Number of loaded paper rolls 1 roll Acceptable Roll Size Maximum: 914mm (36”) Minimum: 210mm (8.5”) Roll Diameter Within 170mm (6.7”) Dimension (W × D × H) 1,080 × 475 × 295mm (42.5 × 18.7 × 11.6”) W eight 33kg (73lb) • Side Guides •T a b l e • Copy Stacker[...]

  • Página 150

    65 INDEX A altitude, 60 B background, dirty , 56 blanking margins, 29 bleeding image, 29 C clearance, 62 copy density , 27 copy media, 25 copying, 13 copying do’ s & don’ts, 13, 59 crooking image (skewed), 56 D daily maintenance, 58 dark copies, making, 27 dark copies, problem, 56 default settings, 34 density , 27 dirty backgrounds, 56 do?[...]

  • Página 151

    66 S selected area, copying a, 31 service indicators, 51 settings, default, 34 skewed image, 56 synchro cutting, 20 T temperature, 60 temperature, fusing, 26 thick and thin paper, 10 toner bottle, 12, 39 toner, adding, 42 toner , do’ s & don’t, 12 toner, used, 39 troubleshooting, 49[...]